socfpga: Adding pin mux handoff files
Adding the generated pin mux configuration by Preloader
Generator tool
Signed-off-by: Chin Liang See <clsee@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Acked-by: Dinh Nguyen <dinguyen@altera.com>
Cc: Wolfgang Denk <wd@denx.de>
CC: Pavel Machek <pavel@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Tom Rini <trini@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
diff --git a/board/altera/socfpga/pinmux_config.h b/board/altera/socfpga/pinmux_config.h
new file mode 100644
index 0000000..f278f2b
--- /dev/null
+++ b/board/altera/socfpga/pinmux_config.h
@@ -0,0 +1,54 @@
+/* This file is generated by Preloader Generator */
+
+#ifndef _PRELOADER_PINMUX_CONFIG_H_
+#define _PRELOADER_PINMUX_CONFIG_H_
+
+/*
+ * State of enabling for which IP connected out through the muxing.
+ * Value 1 mean the IP connection is muxed out
+ */
+#define CONFIG_HPS_EMAC0 (0)
+#define CONFIG_HPS_EMAC1 (1)
+#define CONFIG_HPS_USB0 (0)
+#define CONFIG_HPS_USB1 (1)
+#define CONFIG_HPS_NAND (0)
+#define CONFIG_HPS_SDMMC (1)
+#define CONFIG_HPS_QSPI (1)
+#define CONFIG_HPS_UART0 (1)
+#define CONFIG_HPS_UART1 (0)
+#define CONFIG_HPS_TRACE (1)
+#define CONFIG_HPS_I2C0 (1)
+#define CONFIG_HPS_I2C1 (0)
+#define CONFIG_HPS_I2C2 (0)
+#define CONFIG_HPS_I2C3 (0)
+#define CONFIG_HPS_SPIM0 (1)
+#define CONFIG_HPS_SPIM1 (0)
+#define CONFIG_HPS_SPIS0 (0)
+#define CONFIG_HPS_SPIS1 (0)
+#define CONFIG_HPS_CAN0 (1)
+#define CONFIG_HPS_CAN1 (0)
+
+/* IP attribute value (which affected by pin muxing configuration) */
+#define CONFIG_HPS_SDMMC_BUSWIDTH (4)
+
+/* 1 if the pins are connected out */
+#define CONFIG_HPS_QSPI_CS0 (1)
+#define CONFIG_HPS_QSPI_CS1 (0)
+#define CONFIG_HPS_QSPI_CS2 (0)
+#define CONFIG_HPS_QSPI_CS3 (0)
+
+/* UART */
+/* 1 means the pin is mux out or available */
+#define CONFIG_HPS_UART0_TX (1)
+#define CONFIG_HPS_UART0_RX (1)
+#define CONFIG_HPS_UART0_CTS (0)
+#define CONFIG_HPS_UART0_RTS (0)
+#define CONFIG_HPS_UART1_TX (0)
+#define CONFIG_HPS_UART1_RX (0)
+#define CONFIG_HPS_UART1_CTS (0)
+#define CONFIG_HPS_UART1_RTS (0)
+
+/* Pin mux data */
+#define CONFIG_HPS_PINMUX_NUM (207)
+
+#endif /* _PRELOADER_PINMUX_CONFIG_H_ */