cosmetic: doc: driver-model: Do not number driver lists
Everytime a dead driver is removed from the list,
we must re-number. This is a painful task.
Try
git show e53232250 -- doc/driver-model/UDM-serial.txt
git show 6f62f4207 -- doc/driver-model/UDM-serial.txt
git show b9f4bc34a -- doc/driver-model/UDM-serial.txt
to see what I mean.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
diff --git a/doc/driver-model/UDM-serial.txt b/doc/driver-model/UDM-serial.txt
index 54f853e..da6d429 100644
--- a/doc/driver-model/UDM-serial.txt
+++ b/doc/driver-model/UDM-serial.txt
@@ -57,119 +57,119 @@
III) Analysis of in-tree drivers
--------------------------------
- 1) altera_jtag_uart.c
- ---------------------
+ altera_jtag_uart.c
+ ------------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 2) altera_uart.c
- ----------------
+ altera_uart.c
+ -------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 3) arm_dcc.c
- ------------
+ arm_dcc.c
+ ---------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible, unless used
with CONFIG_ARM_DCC_MULTI. Then it registers another separate IOMUX.
- 4) atmel_usart.c
- ----------------
+ atmel_usart.c
+ -------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 5) mcfuart.c
- ------------
+ mcfuart.c
+ ---------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 6) ns16550.c
- ------------
+ ns16550.c
+ ---------
This driver seems complicated and certain consideration will need to be made
during conversion. This driver is implemented in very universal manner,
therefore it'll be necessary to properly design it's platform_data.
- 7) ns9750_serial.c
- ------------------
+ ns9750_serial.c
+ ---------------
Unmaintained port. Code got removed.
- 8) opencores_yanu.c
- -------------------
+ opencores_yanu.c
+ ----------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 9) s3c4510b_uart.c
- ------------------
+ s3c4510b_uart.c
+ ---------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 10) sandbox.c
- -------------
+ sandbox.c
+ ---------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 11) serial.c
- ------------
+ serial.c
+ --------
This is a complementary part of NS16550 UART driver, see above.
- 12) serial_clps7111.c
- ---------------------
+ serial_clps7111.c
+ -----------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 13) serial_imx.c
- ----------------
+ serial_imx.c
+ ------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible. This driver
might be removed in favor of serial_mxc.c .
- 14) serial_ixp.c
+ serial_ixp.c
+ ------------
+ No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
+
+ serial_ks8695.c
+ ---------------
+ No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
+
+ serial_max3100.c
----------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 15) serial_ks8695.c
- -------------------
+ serial_mxc.c
+ ------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 16) serial_max3100.c
- --------------------
+ serial_netarm.c
+ ---------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 17) serial_mxc.c
- ----------------
- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
-
- 18) serial_netarm.c
- -------------------
- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
-
- 19) serial_pl01x.c
- ------------------
+ serial_pl01x.c
+ --------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible, though this
driver in fact contains two drivers in total.
- 20) serial_pxa.c
- ----------------
+ serial_pxa.c
+ ------------
This driver is a bit complicated, but due to clean support for
CONFIG_SERIAL_MULTI, there are no expected obstructions throughout the
conversion process.
- 21) serial_s3c24x0.c
- --------------------
+ serial_s3c24x0.c
+ ----------------
This driver, being quite ad-hoc might need some work to bring back to shape.
- 22) serial_s5p.c
- ----------------
+ serial_s5p.c
+ ------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 23) serial_sa1100.c
- -------------------
- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
-
- 24) serial_sh.c
+ serial_sa1100.c
---------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 25) serial_xuartlite.c
- ----------------------
+ serial_sh.c
+ -----------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 26) usbtty.c
- ------------
+ serial_xuartlite.c
+ ------------------
+ No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
+
+ usbtty.c
+ --------
This driver seems very complicated and entangled with USB framework. The
conversion might be complicated here.
- 27) arch/powerpc/cpu/mpc512x/serial.c
- -------------------------------------
+ arch/powerpc/cpu/mpc512x/serial.c
+ ---------------------------------
This driver supports CONFIG_SERIAL_MULTI. This driver will need to be moved to
proper place.