imx9: imx93_evk: Update spl stack & bss base address
As the ddr timing info will be saved at the last 16KB of
the OCRAM, spl stack & bss base should be updated to avoid
conflict.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/configs/imx93_11x11_evk_defconfig b/configs/imx93_11x11_evk_defconfig
index c2709f8..cf240ba 100644
--- a/configs/imx93_11x11_evk_defconfig
+++ b/configs/imx93_11x11_evk_defconfig
@@ -15,7 +15,7 @@
CONFIG_SYS_PROMPT="u-boot=> "
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_STACK=0x2051ddd0
+CONFIG_SPL_STACK=0x20519dd0
CONFIG_SPL=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
CONFIG_SPL_LOAD_IMX_CONTAINER=y
@@ -30,7 +30,7 @@
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x26000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2051e000
+CONFIG_SPL_BSS_START_ADDR=0x2051a000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
diff --git a/configs/imx93_11x11_evk_ld_defconfig b/configs/imx93_11x11_evk_ld_defconfig
index d23c907..7bcd80f 100644
--- a/configs/imx93_11x11_evk_ld_defconfig
+++ b/configs/imx93_11x11_evk_ld_defconfig
@@ -30,12 +30,12 @@
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x26000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2051e000
+CONFIG_SPL_BSS_START_ADDR=0x2051a000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x2051ddd0
+CONFIG_SPL_STACK=0x20519dd0
CONFIG_SYS_SPL_MALLOC=y
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x83200000