Replace __asm references with __asm__
__asm__ follows gcc's documented syntax and is generally more common
than __asm. This change is only asthetic and should not affect
functionality.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
diff --git a/board/MAI/AmigaOneG3SE/enet.c b/board/MAI/AmigaOneG3SE/enet.c
index ac969a9..b9df55c 100644
--- a/board/MAI/AmigaOneG3SE/enet.c
+++ b/board/MAI/AmigaOneG3SE/enet.c
@@ -297,50 +297,50 @@
static inline int ETH_INL(struct eth_device* dev, u_long addr)
{
- __asm volatile ("eieio");
+ __asm__ volatile ("eieio");
return le32_to_cpu(*(volatile u32 *)io_to_phys(addr + dev->iobase));
}
static inline int ETH_INW(struct eth_device* dev, u_long addr)
{
- __asm volatile ("eieio");
+ __asm__ volatile ("eieio");
return le16_to_cpu(*(volatile u16 *)io_to_phys(addr + dev->iobase));
}
static inline int ETH_INB(struct eth_device* dev, u_long addr)
{
- __asm volatile ("eieio");
+ __asm__ volatile ("eieio");
return *(volatile u8 *)io_to_phys(addr + dev->iobase);
}
static inline void ETH_OUTB(struct eth_device* dev, int command, u_long addr)
{
*(volatile u8 *)io_to_phys(addr + dev->iobase) = command;
- __asm volatile ("eieio");
+ __asm__ volatile ("eieio");
}
static inline void ETH_OUTW(struct eth_device* dev, int command, u_long addr)
{
*(volatile u16 *)io_to_phys(addr + dev->iobase) = cpu_to_le16(command);
- __asm volatile ("eieio");
+ __asm__ volatile ("eieio");
}
static inline void ETH_OUTL(struct eth_device* dev, int command, u_long addr)
{
*(volatile u32 *)io_to_phys(addr + dev->iobase) = cpu_to_le32(command);
- __asm volatile ("eieio");
+ __asm__ volatile ("eieio");
}
static inline int ETH_STATUS(struct eth_device* dev)
{
- __asm volatile ("eieio");
+ __asm__ volatile ("eieio");
return le16_to_cpu(*(volatile u16 *)io_to_phys(EL3_STATUS + dev->iobase));
}
static inline void ETH_CMD(struct eth_device* dev, int command)
{
*(volatile u16 *)io_to_phys(EL3_CMD + dev->iobase) = cpu_to_le16(command);
- __asm volatile ("eieio");
+ __asm__ volatile ("eieio");
}
/* Command register is always in the same spot in all the register windows */
diff --git a/board/MAI/AmigaOneG3SE/flash_new.c b/board/MAI/AmigaOneG3SE/flash_new.c
index 7b7ea16..9beb048 100644
--- a/board/MAI/AmigaOneG3SE/flash_new.c
+++ b/board/MAI/AmigaOneG3SE/flash_new.c
@@ -153,14 +153,14 @@
/* Write auto select command: read Manufacturer ID */
x[0x0555] = 0xAA;
- __asm volatile ("sync\n eieio");
+ __asm__ volatile ("sync\n eieio");
x[0x02AA] = 0x55;
- __asm volatile ("sync\n eieio");
+ __asm__ volatile ("sync\n eieio");
x[0x0555] = 0x90;
- __asm volatile ("sync\n eieio");
+ __asm__ volatile ("sync\n eieio");
value = x[0];
- __asm volatile ("sync\n eieio");
+ __asm__ volatile ("sync\n eieio");
DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, value);
@@ -186,7 +186,7 @@
}
value = x[1];
- __asm volatile ("sync\n eieio");
+ __asm__ volatile ("sync\n eieio");
DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", addr+1, value);
diff --git a/board/MAI/AmigaOneG3SE/serial.c b/board/MAI/AmigaOneG3SE/serial.c
index 88039f3..84a913e 100644
--- a/board/MAI/AmigaOneG3SE/serial.c
+++ b/board/MAI/AmigaOneG3SE/serial.c
@@ -75,17 +75,17 @@
/* COM_WRITE_BYTE(LINE_CONTROL, 0x83); */
/* COM_WRITE_BYTE(DIVISOR_LATCH_LSB, (uint8)(clock_divisor & 0xFF)); */
/* COM_WRITE_BYTE(DIVISOR_LATCH_MSB, (uint8)(clock_divisor >> 8)); */
- /* __asm("eieio"); */
+ /* __asm__("eieio"); */
/* Set 8-N-1 */
COM_WRITE_BYTE (LINE_CONTROL, 0x03);
- __asm ("eieio");
+ __asm__ ("eieio");
/* Disable FIFO */
COM_WRITE_BYTE (MODEM_CONTROL, 0x03);
COM_WRITE_BYTE (FIFO_CONTROL, 0x07);
- __asm ("eieio");
+ __asm__ ("eieio");
serial_init_done = 1;
}
diff --git a/board/MAI/AmigaOneG3SE/via686.c b/board/MAI/AmigaOneG3SE/via686.c
index 2427ce5..752a464 100644
--- a/board/MAI/AmigaOneG3SE/via686.c
+++ b/board/MAI/AmigaOneG3SE/via686.c
@@ -211,7 +211,7 @@
}
}
-__asm (" .globl via_calibrate_time_base \n"
+__asm__ (" .globl via_calibrate_time_base \n"
"via_calibrate_time_base: \n"
" lis 9, 0xfe00 \n"
" li 0, 0x00 \n"
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index eb506f3..37d3aa4 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -369,7 +369,7 @@
gpio->PCCON = (gpio->PCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as inputs */
/* allow signals to settle */
for (i=0; i<10000; i++) /* udelay isn't working yet at this point! */
- __asm("NOP");
+ __asm__("NOP");
vfd_board_id = (~gpio->PCDAT) & 0x000F; /* read GPC0...GPC3 port pins */
VFD_DISABLE; /* activate blank for the vfd */