diff --git a/board/keymile/km83xx/MAINTAINERS b/board/keymile/km83xx/MAINTAINERS
index c4c3183..63b0651 100644
--- a/board/keymile/km83xx/MAINTAINERS
+++ b/board/keymile/km83xx/MAINTAINERS
@@ -9,6 +9,7 @@
 F:	configs/kmopti2_defconfig
 F:	configs/kmtepr2_defconfig
 F:	include/configs/suvd3.h
+F:	configs/kmtegr1_defconfig
 F:	configs/kmvect1_defconfig
 F:	configs/suvd3_defconfig
 F:	configs/tuge1_defconfig
diff --git a/configs/kmtegr1_defconfig b/configs/kmtegr1_defconfig
new file mode 100644
index 0000000..aee9886
--- /dev/null
+++ b/configs/kmtegr1_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="KMTEGR1"
+CONFIG_PPC=y
+CONFIG_MPC83xx=y
+CONFIG_TARGET_SUVD3=y
diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h
index fddba92..af8730a 100644
--- a/include/configs/suvd3.h
+++ b/include/configs/suvd3.h
@@ -29,13 +29,48 @@
 #define CONFIG_KM_BOARD_NAME   "suvd3"
 /* include common defines/options for all 8321 Keymile boards */
 #include "km/km8321-common.h"
+
 #elif defined(CONFIG_KMVECT1)   /* VECT1 board specific */
 #define CONFIG_HOSTNAME		kmvect1
 #define CONFIG_KM_BOARD_NAME   "kmvect1"
+/* at end of uboot partition, before env */
+#define CONFIG_SYS_QE_FW_ADDR   0xF00B0000
 /* include common defines/options for all 8309 Keymile boards */
 #include "km/km8309-common.h"
+
+#elif defined(CONFIG_KMTEGR1)   /* TEGR1 board specific */
+#define CONFIG_HOSTNAME   kmtegr1
+#define CONFIG_KM_BOARD_NAME   "kmtegr1"
+#define CONFIG_KM_UBI_PARTITION_NAME_BOOT	"ubi0"
+#define CONFIG_KM_UBI_PARTITION_NAME_APP	"ubi1"
+#define MTDIDS_DEFAULT			"nor0=boot,nand0=app"
+#define MTDPARTS_DEFAULT		"mtdparts="			\
+	"boot:"								\
+		"768k(u-boot),"						\
+		"256k(qe-fw),"						\
+		"128k(env),"						\
+		"128k(envred),"						\
+		"-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"		\
+	"app:"								\
+		"-(" CONFIG_KM_UBI_PARTITION_NAME_APP ");"
+
+#define CONFIG_ENV_ADDR		0xF0100000
+#define CONFIG_ENV_OFFSET	0x100000
+
+#define CONFIG_CMD_NAND
+#define CONFIG_NAND_ECC_BCH
+#define CONFIG_BCH
+#define CONFIG_NAND_KMETER1
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define NAND_MAX_CHIPS				1
+
+/* include common defines/options for all 8309 Keymile boards */
+#include "km/km8309-common.h"
+/* must be after the include because KMBEC_FPGA is otherwise undefined */
+#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
+
 #else
-#error Supported boards are: SUVD3, KMVECT1
+#error Supported boards are: SUVD3, KMVECT1, KMTEGR1
 #endif
 
 #define CONFIG_SYS_APP1_BASE		0xA0000000
@@ -56,6 +91,7 @@
  *
  */
 
+#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
 /*
  * APP1 on the local bus CS2
  */
@@ -82,14 +118,26 @@
 			 0x0000c000 | \
 			 MxMR_WLFx_2X)
 
+#elif defined(CONFIG_KMTEGR1)
+#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
+				 BR_PS_16 | \
+				 BR_MS_GPCM | \
+				 BR_V)
+
+#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
+				 OR_GPCM_SCY_5 | \
+				 OR_GPCM_TRLX_CLEAR | \
+				 OR_GPCM_EHTR_CLEAR)
+
+#endif /* CONFIG_KMTEGR1 */
+
 #define CONFIG_SYS_LBLAWBAR3_PRELIM	CONFIG_SYS_APP2_BASE
 #define CONFIG_SYS_LBLAWAR3_PRELIM	(LBLAWAR_EN | LBLAWAR_256MB)
 
 /*
  * MMU Setup
  */
-
-
+#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
 /* APP1:  icache cacheable, but dcache-inhibit and guarded */
 #define CONFIG_SYS_IBAT5L	(CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
 				 BATL_MEMCOHERENCE)
@@ -99,6 +147,13 @@
 				 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
 
+#elif defined(CONFIG_KMTEGR1)
+#define CONFIG_SYS_IBAT5L (0)
+#define CONFIG_SYS_IBAT5U (0)
+#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
+#endif /* CONFIG_KMTEGR1 */
+
 #define CONFIG_SYS_IBAT6L	(CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
 				 BATL_MEMCOHERENCE)
 #define CONFIG_SYS_IBAT6U	(CONFIG_SYS_APP2_BASE | BATU_BL_256M | \
@@ -131,7 +186,9 @@
 #define CONFIG_SYS_UEC1_PHY_ADDR	CONFIG_SYS_FIXED_PHY_ADDR
 #define CONFIG_SYS_UEC1_INTERFACE_TYPE	PHY_INTERFACE_MODE_MII
 #define CONFIG_SYS_UEC1_INTERFACE_SPEED	100
+#endif /* CONFIG_KMVECT1 */
 
+#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1)
 /* ethernet port connected to piggy (UEC2) */
 #define CONFIG_HAS_ETH1
 #define CONFIG_UEC_ETH2
@@ -142,6 +199,6 @@
 #define CONFIG_SYS_UEC2_PHY_ADDR	0
 #define CONFIG_SYS_UEC2_INTERFACE_TYPE	PHY_INTERFACE_MODE_RMII
 #define CONFIG_SYS_UEC2_INTERFACE_SPEED	100
-#endif /* CONFIG_KMVECT1 */
+#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */
 
 #endif /* __CONFIG_H */