Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).
Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/board/integratorcp/flash.c b/board/integratorcp/flash.c
index 4d6eff0..b653c05 100644
--- a/board/integratorcp/flash.c
+++ b/board/integratorcp/flash.c
@@ -73,7 +73,7 @@
};
/* CP control register base address */
-#define CPCR_BASE 0xCB000000
+#define CPCR_BASE 0xCB000000
#define CPCR_EXTRABANK 0x8
#define CPCR_FLASHSIZE 0x4
#define CPCR_FLWREN 0x2
diff --git a/board/integratorcp/memsetup.S b/board/integratorcp/memsetup.S
index dfdc784..da43cb6 100644
--- a/board/integratorcp/memsetup.S
+++ b/board/integratorcp/memsetup.S
@@ -20,7 +20,7 @@
* MA 02111-1307 USA
*/
/*
- * Memory setup
+ * Memory setup
* - the reset defaults are assumed sufficient
*/
diff --git a/board/integratorcp/split_by_variant.sh b/board/integratorcp/split_by_variant.sh
index 79a6a9d..3f0a447 100755
--- a/board/integratorcp/split_by_variant.sh
+++ b/board/integratorcp/split_by_variant.sh
@@ -3,11 +3,11 @@
# Set the platform defines
# ---------------------------------------------------------
echo -n "/* Integrator configuration implied " > tmp.fil
-echo " by Makefile target */" >> tmp.fil
-echo -n "#define CONFIG_INTEGRATOR" >> tmp.fil
-echo " /* Integrator board */" >> tmp.fil
+echo " by Makefile target */" >> tmp.fil
+echo -n "#define CONFIG_INTEGRATOR" >> tmp.fil
+echo " /* Integrator board */" >> tmp.fil
echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil
-echo " 1 /* Integrator/CP */" >> tmp.fil
+echo " 1 /* Integrator/CP */" >> tmp.fil
cpu="arm_intcm"
variant="unknown core module"
@@ -36,14 +36,14 @@
cp922_XA10_config)
cpu="arm_intcm"
variant="unported core module CM922T_XA10"
- echo -n "#define CONFIG_CM922T_XA10" >> tmp.fil
- echo " 1 /* CPU core is ARM922T_XA10 */" >> tmp.fil
+ echo -n "#define CONFIG_CM922T_XA10" >> tmp.fil
+ echo " 1 /* CPU core is ARM922T_XA10 */" >> tmp.fil
;;
cp920t_config)
cpu="arm920t"
variant="Core module CM920T"
- echo -n "#define CONFIG_CM920T" >> tmp.fil
+ echo -n "#define CONFIG_CM920T" >> tmp.fil
echo " 1 /* CPU core is ARM920T */" >> tmp.fil
;;
@@ -82,21 +82,21 @@
if [ "$cpu" = "arm_intcm" ]
then
echo "/* Core module undefined/not ported */" >> tmp.fil
- echo "#define CONFIG_ARM_INTCM 1" >> tmp.fil
+ echo "#define CONFIG_ARM_INTCM 1" >> tmp.fil
echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil
- echo -n " /* CM may not have " >> tmp.fil
- echo "multiple SSRAM mapping */" >> tmp.fil
- echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil
- echo -n " /* CM may not support SPD " >> tmp.fil
- echo "query */" >> tmp.fil
- echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil
- echo -n " /* CM may not support " >> tmp.fil
- echo "remapping */" >> tmp.fil
- echo -n "#undef CONFIG_CM_INIT " >> tmp.fil
- echo -n " /* CM may not have " >> tmp.fil
- echo "initialization reg */" >> tmp.fil
- echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
- echo " /* CM may not have TCRAM */" >> tmp.fil
+ echo -n " /* CM may not have " >> tmp.fil
+ echo "multiple SSRAM mapping */" >> tmp.fil
+ echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil
+ echo -n " /* CM may not support SPD " >> tmp.fil
+ echo "query */" >> tmp.fil
+ echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil
+ echo -n " /* CM may not support " >> tmp.fil
+ echo "remapping */" >> tmp.fil
+ echo -n "#undef CONFIG_CM_INIT " >> tmp.fil
+ echo -n " /* CM may not have " >> tmp.fil
+ echo "initialization reg */" >> tmp.fil
+ echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
+ echo " /* CM may not have TCRAM */" >> tmp.fil
fi
mkdir -p ${obj}include