board: ti: am57xx: remove USB platform code
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index bed2eb3..8dfb2ee 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -883,91 +883,6 @@
}
#endif
-#if defined(CONFIG_USB_DWC3) && !CONFIG_IS_ENABLED(DM_USB)
-static struct dwc3_device usb_otg_ss2 = {
- .maximum_speed = USB_SPEED_HIGH,
- .base = DRA7_USB_OTG_SS2_BASE,
- .tx_fifo_resize = false,
- .index = 1,
-};
-
-static struct dwc3_omap_device usb_otg_ss2_glue = {
- .base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE,
- .utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
- .index = 1,
-};
-
-static struct ti_usb_phy_device usb_phy2_device = {
- .usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER,
- .index = 1,
-};
-
-int usb_gadget_handle_interrupts(int index)
-{
- u32 status;
-
- status = dwc3_omap_uboot_interrupt_status(index);
- if (status)
- dwc3_uboot_handle_interrupt(index);
-
- return 0;
-}
-
-int board_usb_init(int index, enum usb_init_type init)
-{
- enable_usb_clocks(index);
- switch (index) {
- case 0:
- if (init == USB_INIT_DEVICE) {
- printf("port %d can't be used as device\n", index);
- disable_usb_clocks(index);
- return -EINVAL;
- }
- break;
- case 1:
- if (init == USB_INIT_DEVICE) {
-#ifdef CONFIG_USB_DWC3
- usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
- usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
- ti_usb_phy_uboot_init(&usb_phy2_device);
- dwc3_omap_uboot_init(&usb_otg_ss2_glue);
- dwc3_uboot_init(&usb_otg_ss2);
-#endif
- } else {
- printf("port %d can't be used as host\n", index);
- disable_usb_clocks(index);
- return -EINVAL;
- }
-
- break;
- default:
- printf("Invalid Controller Index\n");
- }
-
- return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-#ifdef CONFIG_USB_DWC3
- switch (index) {
- case 0:
- case 1:
- if (init == USB_INIT_DEVICE) {
- ti_usb_phy_uboot_exit(index);
- dwc3_uboot_exit(index);
- dwc3_omap_uboot_exit(index);
- }
- break;
- default:
- printf("Invalid Controller Index\n");
- }
-#endif
- disable_usb_clocks(index);
- return 0;
-}
-#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */
-
#ifdef CONFIG_DRIVER_TI_CPSW
/* Delay value to add to calibrated value */