serial: sh: Add support External Clock mode
R8A7780 and R7A7791 of rmobile supports External Clock mode, and these uses
different from Internal Clock mode registers and calculations to the baud rate
setting. This adds function for External Clock mode.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 0826d59..144a925 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -49,9 +49,15 @@
static void sh_serial_setbrg(void)
{
DECLARE_GLOBAL_DATA_PTR;
-
+#ifdef CONFIG_SCIF_USE_EXT_CLK
+ unsigned short dl = DL_VALUE(gd->baudrate, CONFIG_SH_SCIF_CLK_FREQ);
+ sci_out(&sh_sci, DL, dl);
+ /* Need wait: Clock * 1/dl × 1/16 */
+ udelay((1000000 * dl * 16 / CONFIG_SYS_CLK_FREQ) * 1000 + 1);
+#else
sci_out(&sh_sci, SCBRR,
SCBRR_VALUE(gd->baudrate, CONFIG_SH_SCIF_CLK_FREQ));
+#endif
}
static int sh_serial_init(void)
diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h
index 4f3e225..fe8cde4 100644
--- a/drivers/serial/serial_sh.h
+++ b/drivers/serial/serial_sh.h
@@ -735,8 +735,8 @@
#elif defined(__H8300H__) || defined(__H8300S__)
#define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1)
#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791)
-#define SCBRR DL
-#define SCBRR_VALUE(bps, clk) (clk / bps / 16)
+#define DL_VALUE(bps, clk) (clk / bps / 16) /* External Clock */
+#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) /* Internal Clock */
#else /* Generic SH */
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
#endif