USB: ehci-mx6: Add proper IO accessors
Add proper IO accessors for mx6 usb registers.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Jason Liu <r64343@freescale.com>
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index b7bf49d..5dec673 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -46,13 +46,9 @@
#define USBPHY_CTRL_ENUTMILEVEL3 0x00008000
#define USBPHY_CTRL_ENUTMILEVEL2 0x00004000
-#define ANADIG_USB2_CHRG_DETECT 0x00000210
#define ANADIG_USB2_CHRG_DETECT_EN_B 0x00100000
#define ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B 0x00080000
-#define ANADIG_USB2_PLL_480_CTRL 0x00000020
-#define ANADIG_USB2_PLL_480_CTRL_SET 0x00000024
-#define ANADIG_USB2_PLL_480_CTRL_CLR 0x00000028
#define ANADIG_USB2_PLL_480_CTRL_BYPASS 0x00010000
#define ANADIG_USB2_PLL_480_CTRL_ENABLE 0x00002000
#define ANADIG_USB2_PLL_480_CTRL_POWER 0x00001000
@@ -77,8 +73,7 @@
static void usbh1_power_config(void)
{
- void __iomem *anatop_base = (void __iomem *)ANATOP_BASE_ADDR;
-
+ struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
/*
* Some phy and power's special controls for host1
* 1. The external charger detector needs to be disabled
@@ -89,15 +84,15 @@
*/
__raw_writel(ANADIG_USB2_CHRG_DETECT_EN_B |
ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B,
- anatop_base + ANADIG_USB2_CHRG_DETECT);
+ &anatop->usb2_chrg_detect);
__raw_writel(ANADIG_USB2_PLL_480_CTRL_BYPASS,
- anatop_base + ANADIG_USB2_PLL_480_CTRL_CLR);
+ &anatop->usb2_pll_480_ctrl);
__raw_writel(ANADIG_USB2_PLL_480_CTRL_ENABLE |
ANADIG_USB2_PLL_480_CTRL_POWER |
ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS,
- anatop_base + ANADIG_USB2_PLL_480_CTRL_SET);
+ &anatop->usb2_pll_480_ctrl_set);
}
static int usbh1_phy_enable(void)