powerpc/corenet_ds: Slave core in holdoff when boot from SRIO
When boot from SRIO, slave's core can be in holdoff after powered on for
some specific requirements. Master can release the slave's core at the
right time by SRIO interface.
Master needs to:
1. Set outbound SRIO windows in order to configure slave's registers
for the core's releasing.
2. Check the SRIO port status when release slave core, if no errors,
will implement the process of the slave core's releasing.
Slave needs to:
1. Set all the cores in holdoff by RCW.
2. Be powered on before master's boot.
Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c
index 5694561..c7f3949 100644
--- a/arch/powerpc/cpu/mpc8xxx/srio.c
+++ b/arch/powerpc/cpu/mpc8xxx/srio.c
@@ -25,6 +25,12 @@
#define SRIO_PORT_ACCEPT_ALL 0x10000001
#define SRIO_IB_ATMU_AR 0x80f55000
+#define SRIO_OB_ATMU_AR_MAINT 0x80077000
+#define SRIO_OB_ATMU_AR_RW 0x80045000
+#define SRIO_LCSBA1CSR_OFFSET 0x5c
+#define SRIO_MAINT_WIN_SIZE 0x1000000 /* 16M */
+#define SRIO_RW_WIN_SIZE 0x100000 /* 1M */
+#define SRIO_LCSBA1CSR 0x60000000
#if defined(CONFIG_FSL_CORENET)
#define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1
@@ -168,4 +174,123 @@
SRIO_IB_ATMU_AR
| atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_ENV_SIZE));
}
+
+#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
+void srio_boot_master_release_slave(void)
+{
+ struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
+ u32 escsr;
+ debug("SRIOBOOT - MASTER: "
+ "Check the port status and release slave core ...\n");
+
+ escsr = in_be32((void *)&srio->lp_serial
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].pescsr);
+ if (escsr & 0x2) {
+ if (escsr & 0x10100) {
+ debug("SRIOBOOT - MASTER: Port [ %d ] is error.\n",
+ CONFIG_SRIOBOOT_MASTER_PORT);
+ } else {
+ debug("SRIOBOOT - MASTER: "
+ "Port [ %d ] is ready, now release slave's core ...\n",
+ CONFIG_SRIOBOOT_MASTER_PORT);
+ /*
+ * configure outbound window
+ * with maintenance attribute to set slave's LCSBA1CSR
+ */
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowtar, 0);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowtear, 0);
+ if (CONFIG_SRIOBOOT_MASTER_PORT)
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowbar,
+ CONFIG_SYS_SRIO2_MEM_PHYS >> 12);
+ else
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowbar,
+ CONFIG_SYS_SRIO1_MEM_PHYS >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowar,
+ SRIO_OB_ATMU_AR_MAINT
+ | atmu_size_mask(SRIO_MAINT_WIN_SIZE));
+
+ /*
+ * configure outbound window
+ * with R/W attribute to set slave's BRR
+ */
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowtar,
+ SRIO_LCSBA1CSR >> 9);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowtear, 0);
+ if (CONFIG_SRIOBOOT_MASTER_PORT)
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowbar,
+ (CONFIG_SYS_SRIO2_MEM_PHYS
+ + SRIO_MAINT_WIN_SIZE) >> 12);
+ else
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowbar,
+ (CONFIG_SYS_SRIO1_MEM_PHYS
+ + SRIO_MAINT_WIN_SIZE) >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowar,
+ SRIO_OB_ATMU_AR_RW
+ | atmu_size_mask(SRIO_RW_WIN_SIZE));
+
+ /*
+ * Set the LCSBA1CSR register in slave
+ * by the maint-outbound window
+ */
+ if (CONFIG_SRIOBOOT_MASTER_PORT) {
+ out_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT
+ + SRIO_LCSBA1CSR_OFFSET,
+ SRIO_LCSBA1CSR);
+ while (in_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT
+ + SRIO_LCSBA1CSR_OFFSET)
+ != SRIO_LCSBA1CSR)
+ ;
+ /*
+ * And then set the BRR register
+ * to release slave core
+ */
+ out_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT
+ + SRIO_MAINT_WIN_SIZE
+ + CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET,
+ CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK);
+ } else {
+ out_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT
+ + SRIO_LCSBA1CSR_OFFSET,
+ SRIO_LCSBA1CSR);
+ while (in_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT
+ + SRIO_LCSBA1CSR_OFFSET)
+ != SRIO_LCSBA1CSR)
+ ;
+ /*
+ * And then set the BRR register
+ * to release slave core
+ */
+ out_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT
+ + SRIO_MAINT_WIN_SIZE
+ + CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET,
+ CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK);
+ }
+ debug("SRIOBOOT - MASTER: "
+ "Release slave successfully! Now the slave should start up!\n");
+ }
+ } else
+ debug("SRIOBOOT - MASTER: Port [ %d ] is not ready.\n",
+ CONFIG_SRIOBOOT_MASTER_PORT);
+}
+#endif
#endif