km/ppc: remove km-mpc8360.h and km-mpc832x.h
Next step to get rid of the header files in icnlude/configs. Move
most of the defines to km83xx.c directly. Some remaining defines
which should go to Kconfig are moved to km-mpc83xx.h for now.
Also remove some unused defines and move one define to powerpc.env
as we only need it there.
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c
index 9ec1dbc..8f2d873 100644
--- a/board/keymile/km83xx/km83xx.c
+++ b/board/keymile/km83xx/km83xx.c
@@ -35,6 +35,91 @@
DECLARE_GLOBAL_DATA_PTR;
+#if CONFIG_IS_ENABLED(TARGET_KMCOGE5NE) || CONFIG_IS_ENABLED(TARGET_KMETER1)
+#define CFG_SYS_DDR_MODE 0x47860452
+#define CFG_SYS_DDR_INTERVAL (\
+ (0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+ (0x203 << SDRAM_INTERVAL_REFINT_SHIFT))
+#define CFG_SYS_DDR_TIMING_0 (\
+ (2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+ (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+ (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+ (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+ (0 << TIMING_CFG0_WWT_SHIFT) | \
+ (0 << TIMING_CFG0_RRT_SHIFT) | \
+ (0 << TIMING_CFG0_WRT_SHIFT) | \
+ (0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CFG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \
+ (2 << TIMING_CFG1_WRTORD_SHIFT) | \
+ (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+ (3 << TIMING_CFG1_WRREC_SHIFT) | \
+ (7 << TIMING_CFG1_REFREC_SHIFT) | \
+ (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
+ (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+ (3 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CFG_SYS_DDR_TIMING_2 (\
+ (0xa << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+ (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+ (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+ (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+ (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+ (5 << TIMING_CFG2_CPO_SHIFT) | \
+ (0 << TIMING_CFG2_ADD_LAT_SHIFT))
+
+#define CFG_SYS_DDR_TIMING_3 0x00000000
+
+#else
+#define CFG_SYS_DDR_MODE 0x47860242
+#define CFG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+ (0x200 << SDRAM_INTERVAL_REFINT_SHIFT))
+
+#define CFG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+ (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+ (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+ (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+ (0 << TIMING_CFG0_WWT_SHIFT) | \
+ (0 << TIMING_CFG0_RRT_SHIFT) | \
+ (0 << TIMING_CFG0_WRT_SHIFT) | \
+ (0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CFG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_40) | \
+ (2 << TIMING_CFG1_WRTORD_SHIFT) | \
+ (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+ (3 << TIMING_CFG1_WRREC_SHIFT) | \
+ (7 << TIMING_CFG1_REFREC_SHIFT) | \
+ (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
+ (7 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+ (3 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CFG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+ (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+ (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+ (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+ (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+ (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
+ (5 << TIMING_CFG2_CPO_SHIFT))
+
+#define CFG_SYS_DDR_TIMING_3 0x00000000
+
+#define CFG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
+ CSCONFIG_ODT_WR_CFG | \
+ CSCONFIG_ROW_BIT_13 | \
+ CSCONFIG_COL_BIT_10)
+#endif
+
+#define CFG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
+ SDRAM_CFG_32_BE | \
+ SDRAM_CFG_SREN | \
+ SDRAM_CFG_HSE)
+#define CFG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+#define CFG_SYS_DDR_SDRAM_CFG2 0x00401000
+#define CFG_SYS_DDR_CS0_BNDS 0x0000007f
+#define CFG_SYS_DDR_MODE2 0x8080c000
+
+#define CFG_SYS_SDRAM_SIZE 0x80000000 /* 2048 MiB */
+
static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
static int piggy_present(void)
diff --git a/include/configs/km/km-mpc832x.h b/include/configs/km/km-mpc832x.h
deleted file mode 100644
index f64c0ee..0000000
--- a/include/configs/km/km-mpc832x.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * System IO Config
- */
-#define CFG_SYS_SICRL SICRL_IRQ_CKS
-
-#define CFG_SYS_DDRCDR (\
- DDRCDR_EN | \
- DDRCDR_PZ_MAXZ | \
- DDRCDR_NZ_MAXZ | \
- DDRCDR_M_ODR)
-
-#define CFG_SYS_DDR_CS0_BNDS 0x0000007f
-#define CFG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
- SDRAM_CFG_32_BE | \
- SDRAM_CFG_SREN | \
- SDRAM_CFG_HSE)
-
-#define CFG_SYS_DDR_SDRAM_CFG2 0x00401000
-#define CFG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-#define CFG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
- (0x200 << SDRAM_INTERVAL_REFINT_SHIFT))
-
-#define CFG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
- CSCONFIG_ODT_WR_CFG | \
- CSCONFIG_ROW_BIT_13 | \
- CSCONFIG_COL_BIT_10)
-
-#define CFG_SYS_DDR_MODE 0x47860242
-#define CFG_SYS_DDR_MODE2 0x8080c000
-
-#define CFG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
- (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
- (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
- (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
- (0 << TIMING_CFG0_WWT_SHIFT) | \
- (0 << TIMING_CFG0_RRT_SHIFT) | \
- (0 << TIMING_CFG0_WRT_SHIFT) | \
- (0 << TIMING_CFG0_RWT_SHIFT))
-
-#define CFG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_40) | \
- (2 << TIMING_CFG1_WRTORD_SHIFT) | \
- (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
- (3 << TIMING_CFG1_WRREC_SHIFT) | \
- (7 << TIMING_CFG1_REFREC_SHIFT) | \
- (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
- (7 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
- (3 << TIMING_CFG1_PRETOACT_SHIFT))
-
-#define CFG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
- (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
- (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
- (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
- (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
- (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
- (5 << TIMING_CFG2_CPO_SHIFT))
-
-#define CFG_SYS_DDR_TIMING_3 0x00000000
-
-#define CFG_SYS_KMBEC_FPGA_BASE 0xE8000000
-#define CFG_SYS_KMBEC_FPGA_SIZE 128
diff --git a/include/configs/km/km-mpc8360.h b/include/configs/km/km-mpc8360.h
deleted file mode 100644
index 04d3d35..0000000
--- a/include/configs/km/km-mpc8360.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* KMBEC FPGA (PRIO) */
-#define CFG_SYS_KMBEC_FPGA_BASE 0xE8000000
-#define CFG_SYS_KMBEC_FPGA_SIZE 64
-
-/*
- * High Level Configuration Options
- */
-
-/*
- * System IO Setup
- */
-#define CFG_SYS_SICRH (SICRH_UC1EOBI | SICRH_UC2E1OBI)
-
-/**
- * DDR RAM settings
- */
-#define CFG_SYS_DDR_SDRAM_CFG (\
- SDRAM_CFG_SDRAM_TYPE_DDR2 | \
- SDRAM_CFG_SREN | \
- SDRAM_CFG_HSE)
-
-#define CFG_SYS_DDR_SDRAM_CFG2 0x00401000
-
-#define CFG_SYS_DDR_CLK_CNTL (\
- DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-
-#define CFG_SYS_DDR_INTERVAL (\
- (0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
- (0x203 << SDRAM_INTERVAL_REFINT_SHIFT))
-
-#define CFG_SYS_DDR_CS0_BNDS 0x0000007f
-
-#define CFG_SYS_DDRCDR (\
- DDRCDR_EN | \
- DDRCDR_Q_DRN)
-#define CFG_SYS_DDR_MODE 0x47860452
-#define CFG_SYS_DDR_MODE2 0x8080c000
-
-#define CFG_SYS_DDR_TIMING_0 (\
- (2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
- (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
- (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
- (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
- (0 << TIMING_CFG0_WWT_SHIFT) | \
- (0 << TIMING_CFG0_RRT_SHIFT) | \
- (0 << TIMING_CFG0_WRT_SHIFT) | \
- (0 << TIMING_CFG0_RWT_SHIFT))
-
-#define CFG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \
- (2 << TIMING_CFG1_WRTORD_SHIFT) | \
- (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
- (3 << TIMING_CFG1_WRREC_SHIFT) | \
- (7 << TIMING_CFG1_REFREC_SHIFT) | \
- (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
- (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
- (3 << TIMING_CFG1_PRETOACT_SHIFT))
-
-#define CFG_SYS_DDR_TIMING_2 (\
- (0xa << TIMING_CFG2_FOUR_ACT_SHIFT) | \
- (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
- (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
- (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
- (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
- (5 << TIMING_CFG2_CPO_SHIFT) | \
- (0 << TIMING_CFG2_ADD_LAT_SHIFT))
-
-#define CFG_SYS_DDR_TIMING_3 0x00000000
-
diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h
index c939caf..21f707a 100644
--- a/include/configs/km/km-mpc83xx.h
+++ b/include/configs/km/km-mpc83xx.h
@@ -1,10 +1,4 @@
/*
- * Internal Definitions
- */
-#include <linux/stringify.h>
-#define BOOTFLASH_START 0xF0000000
-
-/*
* DDR Setup
*/
#define CFG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */
@@ -12,13 +6,6 @@
#define CFG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-#define CFG_83XX_DDR_USES_CS0
-
-/*
- * Manually set up DDR parameters
- */
-#define CFG_SYS_SDRAM_SIZE 0x80000000 /* 2048 MiB */
-
/*
* The reserved memory
*/
@@ -48,10 +35,34 @@
#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE }
+#define CFG_SYS_KMBEC_FPGA_BASE 0xE8000000
+
#if defined(CONFIG_CMD_NAND)
#define CFG_SYS_NAND_BASE CFG_SYS_KMBEC_FPGA_BASE
#endif
+#if defined(CONFIG_TARGET_KMCOGE5NE) || defined(CONFIG_TARGET_KMETER1)
+/*
+ * System IO Setup
+ */
+#define CFG_SYS_SICRH (SICRH_UC1EOBI | SICRH_UC2E1OBI)
+
+#define CFG_SYS_DDRCDR (\
+ DDRCDR_EN | \
+ DDRCDR_Q_DRN)
+#else
+/*
+ * System IO Config
+ */
+#define CFG_SYS_SICRL SICRL_IRQ_CKS
+
+#define CFG_SYS_DDRCDR (\
+ DDRCDR_EN | \
+ DDRCDR_PZ_MAXZ | \
+ DDRCDR_NZ_MAXZ | \
+ DDRCDR_M_ODR)
+#endif
+
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
diff --git a/include/configs/kmcoge5ne.h b/include/configs/kmcoge5ne.h
index d52f45b..7835332 100644
--- a/include/configs/kmcoge5ne.h
+++ b/include/configs/kmcoge5ne.h
@@ -13,7 +13,6 @@
/* include common defines/options for all Keymile boards */
#include "km/km-mpc83xx.h"
-#include "km/km-mpc8360.h"
/**
* KMCOGE5NE has 512 MB RAM
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 6f67e5a..f9be06f 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -10,7 +10,6 @@
/* include common defines/options for all Keymile boards */
#include "km/km-mpc83xx.h"
-#include "km/km-mpc8360.h"
#define CFG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
CSCONFIG_ROW_BIT_13 | \
diff --git a/include/configs/kmopti2.h b/include/configs/kmopti2.h
index d6a3844..69c28c2 100644
--- a/include/configs/kmopti2.h
+++ b/include/configs/kmopti2.h
@@ -22,6 +22,5 @@
/* include common defines/options for all Keymile boards */
#include "km/km-mpc83xx.h"
-#include "km/km-mpc832x.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/kmsupx5.h b/include/configs/kmsupx5.h
index d6a3844..69c28c2 100644
--- a/include/configs/kmsupx5.h
+++ b/include/configs/kmsupx5.h
@@ -22,6 +22,5 @@
/* include common defines/options for all Keymile boards */
#include "km/km-mpc83xx.h"
-#include "km/km-mpc832x.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/kmtepr2.h b/include/configs/kmtepr2.h
index d6a3844..69c28c2 100644
--- a/include/configs/kmtepr2.h
+++ b/include/configs/kmtepr2.h
@@ -22,6 +22,5 @@
/* include common defines/options for all Keymile boards */
#include "km/km-mpc83xx.h"
-#include "km/km-mpc832x.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/tuge1.h b/include/configs/tuge1.h
index d6a3844..69c28c2 100644
--- a/include/configs/tuge1.h
+++ b/include/configs/tuge1.h
@@ -22,6 +22,5 @@
/* include common defines/options for all Keymile boards */
#include "km/km-mpc83xx.h"
-#include "km/km-mpc832x.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h
index d6a3844..69c28c2 100644
--- a/include/configs/tuxx1.h
+++ b/include/configs/tuxx1.h
@@ -22,6 +22,5 @@
/* include common defines/options for all Keymile boards */
#include "km/km-mpc83xx.h"
-#include "km/km-mpc832x.h"
#endif /* __CONFIG_H */
diff --git a/include/environment/pg-wcom/powerpc.env b/include/environment/pg-wcom/powerpc.env
index a57fd93..744c073 100644
--- a/include/environment/pg-wcom/powerpc.env
+++ b/include/environment/pg-wcom/powerpc.env
@@ -1,3 +1,5 @@
+#define BOOTFLASH_START 0xF0000000
+
arch=ppc_82xx
bootm_mapsize=CONFIG_SYS_BOOTM_LEN
checkfdt=true