Fix Makefile for "CHANGELOG" target
Merge with /home/sr/git/u-boot/4xx-idcr
diff --git a/CHANGELOG b/CHANGELOG
index 4ac98b7..1b8ca04 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,5580 +1,1108 @@
-======================================================================
-Changes since U-Boot 1.1.4:
-======================================================================
+commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
+Author: Wolfgang Denk <wd@denx.de>
+Date:   Tue Oct 24 21:35:55 2006 +0200
 
-* Add monitor functions for indirect access to PPC440 DCR's
-  Patch by Leonid Baryudin, 12 Oct 2006
+    Switch to automatically generated CHANGELOG file.
+    (use "make CHANGELOG" to update it from time to time)
 
-* PPC405EP: Add support for board configuration of CPC0_PCI register
-  This is needed to be able to configure PerWE*/PCI_INT* pin as PerWE*
-  Patch by Tolunay Orkun, 07 Apr 2006
+commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
+Author: Stefan Roese <sr@denx.de>
+Date:   Tue Oct 24 18:06:48 2006 +0200
 
-* PPC405EP: Add CFG_GPIO0_OR, CFG_GPIO0_ODR to setup GPIO completely.
-  - Add configuration of Open Drain GPIO Output selection
-  - Add configuration of initial value of GPIO output pins
-  Patch by Tolunay Orkun, 07 Apr 2006
+    Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
+    Patch by Stefan Roese, 24 Oct 2006
 
-* Fix spelling; minor code cleanup.
+commit 8ae3b713b2286e0c3213b7802062e4c1599010de
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date:   Tue Oct 24 17:24:55 2006 +0200
 
-* Fix JFFS2 compilation problem
-  Patch by Stefan Roese, 12 Oct 2006
+    Merge with /home/wd/git/u-boot/master
 
-* Cleanup of NAND update patch (remove changelog from cmd_nand.c)
-  Patch by Guido Classen, 10 Oct 2006
+commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date:   Tue Oct 24 15:32:57 2006 +0200
 
-* Several improvements to the new NAND subsystem:
-  - JFFS2 related commands implemented in mtd-utils style
-  - Support for bad blocks
-  - Bad block testing commands
-  - NAND lock commands
-  Please take a look at doc/README.nand for more details
-  Patch by Guido Classen, 10 Oct 2006
+    Code cleanup
 
-* Define IH_CPU_AVR32
-  Make it possible to generate AVR32 uImage files with mkimage and
-  make cmd_bootm recognize them.
-  Patch by Haavard Skinnemoen, 22 Sep 2006
+commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date:   Tue Oct 24 14:51:36 2006 +0200
 
-* Fix buffer overflow problem in ft_build.c
-  Patch by Fredrik Roubert, 09 Oct 2006
+    Move atstk1000 files into vendor specific directory.
+    Patch by Haavard Skinnemoen, 12 Sep 2006
 
-* Make bootp implementation RFC3046 compliant
-  Patch by Joakim Larsson, 27 Jun 2006
+commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date:   Tue Oct 24 14:42:37 2006 +0200
 
-* TQM5200: perform POST memory test only on STK52xx carrier board.
-  (and then only if PSC6_3 is read as "1" when booting).
-  Patch by Martin Krause, 21 Jun 2006
+    Add ATSTK1000 and ATSTK1002 board support
+    Patch by Haavard Skinnemoen, 06 Sep 2006
+    
+    This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
+    daughterboard.
+    
+    ATSTK1000 is a full-featured development board for AT32AP CPUs. It
+    has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
+    and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
+    CompactFlash cards. For more information, please see this page:
+    
+    http://www.atmel.com/dyn/products/tools.asp?family_id=682
+    
+    The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
+    AT32AP7000 chip.
+    
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
 
-* Move "ar" flags to config.mk to allow for silent "make -s"
-  Based on patch by Mike Frysinger, 20 Jun 2006
+commit f93ae788c3640fcde5db383471d45548ff4060d0
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date:   Tue Oct 24 14:31:24 2006 +0200
 
-* Coding style cleanup
+    Add common serial driver for Atmel AT32 and AT91 chips
+    Patch by Haavard Skinnemoen, 06 Sep 2006
+    
+    This is a first attempt at creating a common serial driver for Atmel
+    chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
+    be possible to support AT91RM9200 and other ARM-based chips with some
+    minor modifications.
+    
+    There's nothing fundamentally AVR32-specific in this driver, but it
+    does use some features which are currently only defined for the
+    AT32AP CPU port:
+      * pm_get_clock_freq: Obtain the clock frequency of a given domain
+      * gd->console_uart: A "struct device" containing information about
+        register mappings, gpio resources and clocks associated with the
+        UART device.
+    
+    For more information about these features, please see the "AT32AP
+    CPU" patch.
 
-* Add support for EP82xxM boards
-  Patch by Aaron Sells, 20 Jun 2006
+commit 72a087e04705c26cad982879ebd06b5281bf825a
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date:   Tue Oct 24 14:27:35 2006 +0200
 
-* Fix comments in include/ppc440.h
-  Patch by Martin Hicks, 16 Jun 2006
+    Add AT32AP CPU and AT32AP7000 SoC support
+    Patch by Haavard Skinnemoen, 06 Sep 2006
+    
+    This patch adds support for the AT32AP CPU family and the AT32AP7000
+    chip, which is the first chip implementing the AVR32 architecture.
+    
+    The AT32AP CPU core is a high-performance implementation featuring a
+    7-stage pipeline, separate instruction- and data caches, and a MMU.
+    For more information, please see the "AVR32 AP Technical Reference":
+    
+    http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
+    
+    In addition to this, the AT32AP7000 chip comes with a large set of
+    integrated peripherals, many of which are shared with the AT91 series
+    of ARM-based microcontrollers from Atmel. Full data sheet is
+    available here:
+    
+    http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
+    
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
 
-* Update for CAM5200 board:
-  - Map in a additional chip selects CS4 and CS5.
-  - Modify the port configration, configure six UARTs and no PCI,
-    ATA and USB.
-  - Add custom flash driver to handle specific byte swapping
+commit 7b64fef33c66be648826c0ff9758298ef13d0604
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date:   Tue Oct 24 14:21:16 2006 +0200
 
-* Fix TLB setup for Ocotea board
-  Patch by Stefan Roese, 30 Sep 2006
+    Add AVR32 architecture support
+    Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
+    
+    This patch adds common infrastructure code for the Atmel AVR32
+    architecture. See doc/README.AVR32 for details.
+    
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
 
-* Fix reset problem in sequoia sdram init code
-  Patch by Stefan Roese, 23 Sep 2006
+commit 2da2d9a4766063b9848f3a35ad6025499cf87265
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date:   Tue Oct 24 13:57:33 2006 +0200
 
-* Disable autoboot abort for FO300 when silent mode is enabled
-  (according to S1 switch setting).
+    Use -g instead of -gstabs in AFLAGS_DEBUG
+    Patch by Haavard Skinnemoen, 30 Aug 2006
+    
+    In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
+    matter what the target's preferred debugging format is. This patch
+    simply replaces -gstabs with -g, so that the default debugging format
+    for the architecture is used.
 
-* Cleanup examples binaries
+commit 965829872169c2996023840d98e1d85ad148d629
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date:   Tue Oct 24 13:55:18 2006 +0200
 
-* Add support for AMCC Rainier PPX440GRx eval board
-  Patch by Stefan Roese, 13 Sep 2006
+    Fix/workaround broken dependency handling with make 3.81
+    Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
 
-* Add NAND environment support for PPC440EPx Sequoia NAND boot config
-  Patch by Stefan Roese, 12 Sep 2006
+commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
+Author: Marian Balakowicz <m8@semihalf.com>
+Date:   Mon Oct 23 22:17:05 2006 +0200
 
-* Update NAND boot documentation
-  Patch by Stefan Roese, 12 Sep 2006
+    Fix sequoia separate object direcory building problems.
 
-* Fix alignment problem in "mtdparts" command
+commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Fri Oct 20 17:16:35 2006 -0500
 
-* Add documentation on the latest build environment extensions to
-  the README file.
+    Use generic I2C register block on 85xx and 86xx.
+    
+    Replace private IMMAP I2C structures with generic reg block
+    and allow 86xx to have multiple I2C device busses.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory.
+commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Fri Oct 20 15:54:34 2006 -0500
 
-* Fix LOG_DIR directory creation error.
-  Add support for automatic creation of BUILD_DIR directory.
+    Fix compilation warnings on a few 85xx boards.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Fix build problem cpu/ppc4xx/ndfc.c
-  Patch by Stefan Roese, 07 Sep 2006
+commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Fri Oct 20 15:50:15 2006 -0500
 
-* Fix build problem with CPCI440
-  Patch by Stefan Roese, 07 Sep 2006
+    Converted all 85xx boards to use a common FSL I2C driver.
+    Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
+    And removed hard i2c path from a few u-boot.lds scipts too.
+    Minor whitespace cleanups along the way.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Change Yellowstone to use CFI write buffer
-  Patch by Stefan Roese, 07 Sep 2006
+commit 4d45f69e362b05892c9e92a7907e5820995612aa
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Thu Oct 19 12:02:24 2006 -0500
 
-* Add support for AMCC Sequoia PPC440EPx eval board
-  - Add support for PPC440EPx & PPC440GRx
-  - Add support for PPC440EP(x)/GR(x) NAND controller
-    in cpu/ppc4xx directory
-  - Add NAND boot functionality for Sequoia board,
-    please see doc/README.nand-boot-ppc440 for details
-  - This Sequoia NAND image doesn't support environment
-    in NAND for now. This will be added in a short while.
-  Patch by Stefan Roese, 07 Sep 2006
+    Rewrite a series of goto statements as a sequences of
+    conditional expressions instead.
+    
+    Use consistent return code 0/-1 for good/bad indicators.
+    
+    Include one fewer file if the driver isn't used at all.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Fix mkimage -l bug with multifile images on 64bit platforms
-  Patch by David Updegraff, 06 Sep 2006
+commit 7237c033b02fe295880435f1eb80819a0c987532
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Thu Oct 19 11:02:16 2006 -0500
 
-* Fix build problems on sorcery board.
+    Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
+    
+    in an effort to begin to unify the umpteen FSL I2C drivers that
+    are all otherwise very similar.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Fix coldfire build problems.
-  Patch by Marian Balakowicz, 01 Sep 2006
+commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Thu Oct 19 11:33:52 2006 -0500
 
-* Add support for a saving build objects in a separate directory.
-  Modifications are based on the Linux kernel approach and support
-  two use cases:
-  1) Add O= to the make command line 'make O=/tmp/build all'
-  2) Set environement variable BUILD_DIR to point to the desired location
-	'export BUILD_DIR=/tmp/build'
-	'make'
-  The second approach can also be used with a MAKEALL script
-	'export BUILD_DIR=/tmp/build'
-	'./MAKEALL'
-  Command line 'O=' setting overrides the BUILD_DIR environent variable.
-  When none of the above methods is used the local build is performed
-  and the object files are placed in the source directory.
+    * Fix a bunch of compiler warnings for gcc 4.0
+    
+    Signed-off-by: Matthew McClintock <msm@freescale.com>
 
-* Remove the board/netstar/crcit binary from git repository.
+commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Fri Oct 13 16:47:53 2006 -0500
 
-* Fix tools/updater build error.
+    Fixed leading whitespace issues.
+    Removed spurious LAWAR thing.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Fix tools/easylogo build error.
+commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Thu Oct 12 10:42:36 2006 -0500
 
-* Fixed problems on PRS200 board caused by adding splash screen on MCC200
+    Remove unneeded include files and local variable.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Extended README entry on coding style
+commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:   Tue Oct 10 00:23:32 2006 -0600
 
-* Added another example showing simple interrupt interception.
+    Fix possible uninitialized variable compiler warning.
+    
+    When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
+    do_bootm_linux() may be uninitialized.  There is no possibility in the
+    current code that len will get used uninitialized, but this fix follows
+    the existing convention of setting both len and data to zero at the same
+    time.
+    
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 
-* Added simple_strtoul(), getenv() and setenv() to the exported functions.
-  Also bumped up ABI version to reflect this change.
+commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Oct 11 15:13:01 2006 -0500
 
-* Added interrupt handling capabilities for mpc5xxx processors.
-  Also added Linux like BUG() macros.
+    * Fix a bunch of compiler warnings for gcc 4.0
+    
+    Signed-off-by: Matthew McClintock <msm@freescale.com>
 
-* Coding Style cleanup.
-  Patch by Stefano Babic, 31 Aug 2006
+commit bf651baa365e5447246aad6a633ccd667cf24a39
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Wed Oct 11 10:10:43 2006 -0500
 
-* Add splashscreen support for MCC200 board.
+    Move "ar" flags to config.mk to allow for silent "make -s"
 
-* Make the serial driver framework work with CONFIG_SERIAL_MULTI
-  enabled
+commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Oct 10 17:19:03 2006 -0500
 
-* PCIe endpoint support for AMCC Yucca 440SPe board
-  Patch by Tirumala R Marri, 26 Aug 2006
+    Coding style changes to remove local varible blocks
+    and reformat a bit nicer.
 
-* Improve DIMM detection for AMCC Yucca 440SPe board
-  Improved the memory DIMM detection for the Yucca 440SPe board for
-  the case where a memory DIMM is falsely detected as present.
-  This issue is seen on some AMCC Yucca 440SPe validation boards if
-  only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is
-  populated and DIMM slot 1 is empty.  In this case, U-Boot does
-  not correctly detect that there is only one DIMM memory module
-  installed and will falsely detect two DIMM memory modules are
-  present and therefore U-Boot will not calculate the correct amount
-  of total memory and u-boot will not booting up.
-  Patch by Adam Graham, 24 Aug 2006
+commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Oct 10 17:16:04 2006 -0500
 
-* Fix typo.
+    Fix whitespace issues.
 
-* Code cleanup
+commit 7b382b7125f2397cce63253df62f183e3dfa2770
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Oct 10 17:14:45 2006 -0500
 
-* Update for MCC200 / PRS200 boards:
-  - auto-adjust console device for Linux.
-  - fix typos.
+    Fix whitespace issues.
 
-* Add a fix for a buggy USB device on the FO300 board.
+commit e10390ddd736b0dad1528eec4b0fe35c0827139a
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Oct 10 17:06:53 2006 -0500
 
-* Updates for MCC200 / PRS200 boards:
-  - support for configurations with SDRAM or DDR memory,
-  - support for highboot and lowboot
-  - adjusting environment definitions
+    Fix whitespace issues.
 
-* Add support for WTK FO300 board (TQM5200 based).
+commit 89875e96ba3f023157bf50d5f8e33bf254964a76
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Oct 10 17:03:43 2006 -0500
 
-* Fix TQM834x hang.
+    Ran lindent and cleaned up whitespace issues.
+    Format for 80-columns too.
 
-* Update for SC520 board.
-  Patch by David Updegraff, 02 Dec 2005
+commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Oct 10 17:02:22 2006 -0500
 
-* Fixed common.h spelling error.
-  Patch by Cory Tusar, 30 Nov 2005
+    Fix whitespace and 80-col issues.
 
-* Fix typo.
-  Patch by Andreas Engel, 28 Nov 2005
+commit f55df18187e7a45cb73fec4370d12135e6691ae1
+Author: John Traill <john.traill@freescale.com>
+Date:   Fri Sep 29 08:23:12 2006 +0100
 
-* Fix fatload command on FAT32 formatted partitions.
-  Patch by Joachim Jaeger, 18 Nov 2005
+    Fix missing tCycle/modfreq calculation.
+    
+    Signed-off-by: John Traill <john.traill@freescale.com>
 
-* Fix drivers/dm9000.c when configured in 32 bit mode.
-  Patch by Eric Benard, 17 Nov 2005
+commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
+Author: Andy Fleming <afleming@freescale.com>
+Date:   Wed Sep 13 10:33:35 2006 -0500
 
-* Cleanup debug code for yucca board.
+    Updated config headers to add default FDT-based booting
 
-* MCC200: restrict addressable flash space to 32 MB
+commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
+Author: Andy Fleming <afleming@freescale.com>
+Date:   Wed Sep 13 10:34:18 2006 -0500
 
-* Add debug console on COM12 for MCC200 board
+    Add support for eTSEC 3 & 4 on 8548 CDS
+    
+    * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
+      This will only work on rev 1.3 boards (but doesn't break older boards)
+    * Cleaned up some comments to reflect the expanded role of tsec
+      in other systems
 
-* Fix control-c handing in CONFIG_CMDLINE_EDITING
-  Properly pass break code back from readline.
-  Patch by Roger Blofeld, 31 Jul 2006
+commit 084d648b109c8984f83674043c1a7fa3885ef801
+Author: Andy Fleming <afleming@freescale.com>
+Date:   Wed Sep 13 10:33:56 2006 -0500
 
-* Add commandline history support to all AMCC eval boards
-  Patch by Stefan Roese, 07 Aug 2006
+    Added code to support 2.6.18 PCI changes in u-boot
+    
+    * Added code to swizzle the IRQ map for the PCI
 
-* Add Macronix MXLV320T flash support for AMCC Bamboo
-  Patch by Stefan Roese, 07 Aug 2006
+commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Sep 19 09:34:10 2006 -0500
 
-* Change "mii info" to not print an error upon missing PHY at address
-  Patch by Stefan Roese, 07 Aug 2006
+    Modified makefile for new build mechanism.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Fix PCI-Express on PPC440SPe rev. A.
+commit d14ba6a798beb753e7a864500414fcc2d198b8bc
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Thu Sep 14 08:40:36 2006 -0500
 
-* Fix preboot message on TQM85xx after switching to hush parser.
+    Handle 86xx SVR values according to the new Reference Manual.
+    Both 8641 and 8641D have SVR == 0x8090, and are distinguished
+    by the byte in bits 16-23 instead.
+    Thanks to Jason Jin for noticing.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Adapt TQM85xx ramdisk address to Linux kernel memory map
+commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date:   Mon Aug 28 14:25:31 2006 +0800
 
-* Add initial support for PCI-Express on PPC440SPe (Yucca board).
+    Fixed an OF-tree off-by-one bug when adding a new property name.
+    This bug will cause the kernel booting to pause a long time.
+    
+    Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+    (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
 
-* Fix compiler warning for TRAB board.
-  Patch by Martin Krause, 07 Aug 2006
+commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Aug 29 11:05:09 2006 -0500
 
-* Prevent USB commands from working when USB is stopped.
+    Remove trailing empty lines.
 
-* Add rudimentary handling of alternate settings of USB interfaces.
-  This is in order to fix issues with some USB sticks timing out
-  during initialization. Some code readability improvements.
+commit cd6d73d5b895a5935ac4fde0a356288142a584e0
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Aug 29 09:48:49 2006 -0500
 
-* PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance
-  AMCC suggested to set the PMU bit to 0 for best performace on
-  the PPC440 DDR controller.
-  Please see doc/README.440-DDR-performance for details.
-  Patch by Stefan Roese, 28 Jul 2006
+    Remove bogus msync and use volatile asm.
 
-* AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
-  Please see doc/README.bamboo for details.
-  Patch by Stefan Roese, 27 Jul 2006
+commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Aug 29 08:17:14 2006 -0500
 
-* Fix CONFIG_CMDLINE_EDITING implementation
-  Patch by Stefan Roese, 27 Jul 2006
+    Add myself as maintainer for MPC8641HPCN.
 
-* Fix preboot message on TQM5200 after switching to hush parser.
+commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date:   Mon Aug 28 14:25:31 2006 +0800
 
-* MCC200: set default configuration to low_boot DDR,
-  and support for configurable options high_boot and/or SDRAM.
+    Fixed an OF-tree off-by-one bug when adding a new property name.
+    This bug will cause the kernel booting to pause a long time.
+    
+    Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
 
-* Add support for 256 MB SDRAM on CPU87
-  Patch by Josef Wagner, 25 Nov 2005
+commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date:   Fri Aug 25 14:38:34 2006 -0400
 
-* Add configuration for cam5200 board (based on TQM5200S).
+    Change ramdiskaddr and dtbaddr
+    Remove PEX fluff commands.
+    
+    Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* More code cleanup
+commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Aug 23 13:32:45 2006 -0500
 
-* Disabled kvme080 board in MAKEALL because of build problems.
+    * Another small fix for booting with disable_of
+    
+    Signed-off-by: Matthew McClintock <msm@freescale.com>
 
-* Code cleanup
+commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Wed Aug 23 11:04:43 2006 -0500
 
-* Update NetStar board
-  Patch by Ladislav Michl, 03 Nov 2005
+    Cleanup and lindent new AHCI driver.
 
-* Make code better readable.
-  Patch by Ladislav Michl, 14 Sep 2005
+commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
+Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
+Date:   Wed Aug 23 19:15:12 2006 +0800
 
-* Enable initrd ATAG for xm250 board.
-  Patch by Josef Wagner, 05 Sep 2005
+    Add AHCI define and sata support for MPC8641HPCN board.
+    
+    Signed-off-by:Jason Jin<jason.jin@freescale.com>
 
-* Add readline cmdline-editing extension
-  Patch by JinHua Luo, 01 Sep 2005
+commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
+Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
+Date:   Wed Aug 23 19:10:44 2006 +0800
 
-* Add support for friendly-arm SBC-2410X board
-  Patch by JinHua Luo, 01 Sep 2005
+    Add AHCI support to u-boot
+    
+    Add AHCI support in u-boot, enable the sata disk controllers which
+    following the AHCI protocol.
+    
+    Signed-off-by:Jason Jin<jason.jin@freescale.com>
 
-* Fix multi-part image support on i386 platform.
-  Patch by David Updegraff, 19 Aug 2005
+commit d8ea2acf5f137cae99417df4f573d036ee384668
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date:   Wed Aug 23 17:54:32 2006 +0800
 
-* Add support for KVME080 board
-  Patch by Sangmoon Kim, 18 Aug 2005
+    Add dtb boot-up parameter to default boot commands.
+    
+    Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
 
-* Fix MIPS LE build problem
-  Patch by Matej Kupljen, 10 Aug 2005
+commit b93775c2036b99baa390ea425c4771895bbc63c4
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Aug 22 18:26:08 2006 -0500
 
-* Check argument count in "mii" command.
-  Problem pointed out by Andrew Dyer, 13 Jun 2005
+    Cleanup even more poorly introduced whitespace.
 
-* Cleanup TQM5200 board configurations:
-  - make highboot configurations use environment at high end, too,
-    to avoid flash fragmentation
-  - always use redundand environment
-  - don't enable video code for modules without graphics controller
-  - provide useful (though different) mtdparts settings
-  - get rid of CONFIG_CS_AUTOCONF which was always set anyway
+commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Aug 22 18:07:00 2006 -0500
 
-* Extend mkconfig tool to print more useful target name
+    Cleanup more poorly introduced whitespace.
 
-* Add support for high-boot on TQM5200 and TQM5200S boards.
-  Hint: the CPLD on the TQM5200 must be programmed with a software
-  version supporting the high boot option! The new TQM5200S is
-  already supporting this option. On the TQM5200 this option will be
-  supported in configurations with MPC5200 rev B processors.
-  To actually "high boot", set jumper X30 on the STK52xx.
-  Patch by Martin Krause, 12 Jul 2006
+commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Aug 22 17:54:05 2006 -0500
 
-* Add support for new TQM5200 revisions
-  - Support for TQM5200S (short version without graphic controller)
-  - Support for modules with 'N' type S29GL128N Spansion flashes
-    (requires changes to flash layout)
-  - Support for MPC5200B cpu (mostly support for second SDRAM bank)
-  Patch by Martin Krause, 07 Jul 2006
+    Cleanup poorly introduced whitespace.
 
-* Fix support for PS/2 keyboard on TQM85xx boards
-  The PS/2 keyobard driver for the TQM85xx modules only supports the
-  internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
-  include a DUART, the TQM8560 modules can't be used with the PS/2
-  keyboard controller on the STK85xx board.
-  The PS/2 keyboard driver should work with the modules TQM8540,
-  TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
-  Make sure the PS/2 controller on the STK85xx is programmed. Jumper
-  settings: X66 1-2, 9-10; X61 2-3
-  Patch by Martin Krause, 21 Jun 2006
+commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Aug 22 12:25:27 2006 -0500
 
-* Adjust RTC century handling on STK52xx board to match Linux driver.
-  Patch by Martin Krause, 12 Jun 2006
+    General indent and whitespace cleanups.
 
-* Adjust filenames for USB update images on TRAB board.
-  During an automatic update via USB stick, U-Boot searches for
-  images with the name "firmware.img" and "kernel.img". This names
-  are now changed to "firmw_01.img" and "kernl_01.img". This is done,
-  to prevent updates of new boards (with the new macronics "c" step
-  flashes) with old, incompatible firmware or kernel versions.
-  Patch by Martin Krause, 21 Jun 2006
+commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Aug 22 12:06:18 2006 -0500
 
-* Bugfix in VFD routine on TRAB board.
-  Make sure upper lext pixel can be set to blue, too
-  (so far only red was possible).
-  Patch by Martin Krause, 15 Feb 2006
+    General indent and whitespace cleanups.
 
-* Enable buffered flash writes for TB5200 board.
+commit 41a0e8b304d3ff55fe27a230507aac79684016ac
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue Aug 22 10:42:21 2006 -0500
 
-* Fix some bugs in TRAB board flash driver.
-  - increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds
-  - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT
-  - remove "Unlock Bypass" mode, because macronix flashes do not support
-    this mode officially
-  - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified
-    for Intel compatible flashes, not for AMD compatible.
-  Patch by Martin Krause, 15 Feb 2006
+    Cleanup compiler warnings.
 
-* Add additional error messages to flash driver on TRAB board
-  (for erase errors and timeout errors)
-  Patch by Martin Krause, 14 Feb 2006
+commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Tue Aug 22 09:31:59 2006 -0500
 
-* Add support for TB5200 board
-  The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
-  integrated in a little aluminium case.
-  Patch by Martin Krause, 8 Jun 2006
+    Fix disable_of booting
+    
+    Signed-off-by: Matthew McClintock <msm@freescale.com>
 
-* Enable buffered flash writes for TQM5200 board.
+commit 87a449c8ac396420cb24260f717ea9e6faa82047
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Tue Aug 22 09:23:55 2006 -0500
 
-* Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.
+    Support for FDT in uImage format, error when using FDT from flash
+    
+    Signed-off-by: Matthew McClintock <msm@freescale.com>
 
-* Add support for TQM885D board.
-  Patch by Martin Krause, 20 Mar 2006
+commit 75c299c38369d01addd5e054b8a16217b70f4a86
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date:   Tue Aug 15 15:12:55 2006 -0400
 
-* Fix FEC initialisation: All MII configuration is done via FEC1
-  registers, but MII_SPEED was configured according to FEC used. So
-  if only FEC2 was used, this caused the real MII_SPEED register in
-  FEC1 to stay uninitalised, leqading to "mii_send STUCK!" messages.
-  Fix: always configure MII_SPEED on FEC1 only.
-  Patch by Markus Klotzbuecher, 12 Jul 2006
+    Unlock cache before kernel starts up for MPC86xx
 
-* Add support for SPC1920 board.
-  Patch by Markus Klotzbuecher, 12 Jul 2006
+commit 67256678f00c09b0a7f19e862e5c1847553d31bc
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date:   Tue Aug 15 15:13:15 2006 -0400
 
-* MCC200 board: support console on any one of the Quad UART ports.
+    Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
 
-* Fix error in flash protection calculation on MCC200 board.
+commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date:   Tue Aug 15 15:12:55 2006 -0400
 
-* Major PCMCIA Cleanup to make code better readable and maintainable.
-  Notes:
-  - Board-dependend code for RPXLITE and RPXCLASSIC-based boards
-    placed to the drivers/rpx_pmcia.c file to avoid duplication.
-    Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
-  - drivers/i82365.c has been split into two parts located at
-    board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
-    the only boards using CONFIG_82365).
-  - Changes were tested for clean build and *very* *few* boards.
+    Unlock cache before kernel starts up for MPC86xx
 
-* Fix timer problems on AMCC yucca board.
-  Set Timer Clock Select to use CPU clock as a timer input source.
+commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date:   Tue Aug 15 15:13:15 2006 -0400
 
-* Bring yucca config more in line with other AMCC boards.
+    Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
 
-* Add AMCC bamboo board to MAKEALL build script.
+commit 86c8e17f25e972a7e272950a0735fad84e082b88
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Aug 16 13:59:47 2006 -0500
 
-* Fix AMCC bamboo eval board compilation errors.
+    * Fix disable_of booting
+    
+    Signed-off-by: Matthew McClintock <msm@freescale.com>
 
-* Add system memory to the PCI region list for AMCC PPC44x CPUs.
-  Enabled it for Yucca board.
+commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Aug 16 10:54:09 2006 -0500
 
-* Cleanup config file and bootup output for Yucca board.
+    * Support for FDT in uImage format, error when using FDT from flash
+    
+    Signed-off-by: Matthew McClintock <msm@freescale.com>
 
-* Fix CONFIG_440_GX define usage.
+commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Mon Aug 14 15:33:38 2006 -0500
 
-* Remove autogenerated bmp_logo.h file.
+    Fix BAT0 to actually be cacheable, non-guarded as documented.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Add support for AMCC 440SPe CPU based eval board (Yucca).
+commit 40bc83559db5745681909fd7382ae509567e116d
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Wed Aug 9 15:32:16 2006 -0500
 
-* Call serial_initialize() before first debug() is used.
+    Removed MPC8641HPCN DTS source file from build.
+    It is no longer linked into U-Boot; its sources are
+    now located in the kernel tree.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Cleanup trab board for GCC-4.x
+commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:47:03 2006 -0500
 
-* VoiceBlue update: use new MTD flash partitioning methods, use more
-  reasonable TEXT_BASE, update default environment and enable keyed
-  autoboot.
-  Patch by Ladislav Michl, 16. Aug 2005
+    * Switched default PCI speed for 8540 ADS back to 33MHz
+    
+    * Added comments and a printf to warn that PCI-X won't
+      work at 33MHz
+      Patch by Andy Fleming 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-* Add forgotten changes for the PLEB 2 Board.
-  Patch by David Snowdon, 13. Aug 2005
+commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:46:35 2006 -0500
 
-* Add support for wrPPMC7xx/74xx boards
-  Patch by Richard Danter, 12 Aug 2005
+    * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-* Add support for gth2 board
-  Patch by Thomas Lange, Aug 11 2005
+commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:46:13 2006 -0500
 
-* Add support for CONFIG_SERIAL_MULTI on MPC5xxx
-  Patch by Martin Krause, 8 Jun 2006
+    * Added VIA configuration table
+    
+    * Added support for PCI2 on CDS
+      Patch by Andy Fleming 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-  This patch supports two serial consoles on boards with
-  a MPC5xxx CPU. The console can be switched at runtime
-  by setting stdin, stdout and stderr to the desired serial
-  interface (serial0 or serial1). The PSCs to be used as
-  console port are definded by CONFIG_PSC_CONSOLE
-  and CONFIG_PSC_CONSOLE2.
-  See README.serial_multi for details.
+commit c88f9fe66b64247e5b6a38410ba315ca25596d16
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:45:41 2006 -0500
 
-* Bugfix in I2C initialisation on S3C2400.
-  If the bus is blocked because of a previously interrupted
-  transfer, up to eleven clocks are generated on the I2CSCL
-  line to complete the transfer and to free the bus.
-  With this fix pin I2CSCL (PG6) is really configured as GPIO
-  so the clock pulses are really generated.
-  Patch by Martin Krause, 04 Apr 2006
+    * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-* Fix DDR6 errata on TQM834x boards
-  Patch by Thomas Waehner, 07 Mar 2006
+commit 97074ed9655309b64231bc2cee69fe85399f8055
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:45:17 2006 -0500
 
-* Remove obsolete flash driver board/tqm5200/flash.c
-  Patch by Martin Krause, 11 Jan 2006
+    * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-* Update configuration for CMC-PU2 board
-  Patch by Martin Krause, 17 Nov 2005
+commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:44:49 2006 -0500
 
-* Add support for PS/2 keyboard on TQM85xx board
-  Patch by Martin Krause, 07 Nov 2005
+    * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-  Tested on a STK85XX baseboard. Make sure the PS/2 controller
-  has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
+commit a4e11558b810ef2cddffdf7b9d86bc1130441960
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:44:23 2006 -0500
 
-* Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
-  In tsc2000_read_channel() the delay after setting the multiplexer
-  to a temperature channel is increased from 1,5 ms to 10 ms. This
-  is to allow the multiplexer inputs to stabilize after huge steps
-  of the input signal level.
-  Patch by Martin Krause, 08 Nov 2005
+    * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-* Adjust TQM5200 make targets
-  Make the automatic CS configuration the default.
-  The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
-  and CONFIG_TQM5200_AC are removed.
-  "TQM5200_config" is now the default for STK52XX.200 base boards.
-  On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
-  Patch by Martin Krause, 07 Nov 2005
+commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:43:36 2006 -0500
 
-* Fix setting of environment variable "ver" on trab board
-  The environment variable "ver" is now set before
-  do_auto_update() is called, so that "ver" can be used
-  in USB update scripts.
-  Patch by Martin Krause, 27 Oct 2005
+    * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Fix wrong usage of udelay() in led_blink() on trab board
-  Patch by Martin Krause, 27 Oct 2005
+commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:43:00 2006 -0500
 
-* Fix udelay bug in vfd.c for trab board
-  Patch by Martin Krause, 27 Oct 2005
+    * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
 
-* Disable JFFS2 support for trab board
-  Patch by Martin Krause, 27 Oct 2005
+commit 5498d90312aad9f6bdbf047986027c35b03cd163
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:42:24 2006 -0500
 
-* Change mtdparts definition on trab board to match current flash map
-  Patch by Martin Krause, 27 Oct 2005
+    * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
 
-* Fix memory init problems on MCC200 board
+commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:41:37 2006 -0500
 
-* Fix IxEthDB.h to compile again
-  Patch by Stefan Roese, 14 Jun 2006
+    * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
 
-* Minor cleanup for PCS440EP board
-  Patch by Stefan Roese, 13 Jun 2006
+commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
+Author: John Traill <john.traill@freescale.com>
+Date:   Wed Aug 9 14:33:50 2006 +0100
 
-* Add MCF5282 support (without preloader)
-  relocate ichache_State to ram
-  u-boot can run from internal flash
-  Add EB+MCF-EV123 board support.
-  Add m68k Boards to MAKEALL
-  Patch from Jens Scharsig, 08 Aug 2005
+    Add Rapidio support for the MPC8641HPCN
+    
+    Signed-off-by: John Traill <john.traill@freescale.com>
 
-* Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
-  Patch by Scott McNutt, 08 Jun 2006
+commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
+Author: John Traill <john.traill@freescale.com>
+Date:   Tue Aug 8 11:32:43 2006 +0100
 
-* Nios II - Add EPCS Controller bootrom work-around
-  -When booting from an epcs controller, the epcs bootrom may leave the
-  slave select in an asserted state causing soft reset hang. This
-  patch ensures slave select is negated at reset.
-  Patch by Scott McNutt, 08 Jun 2006
+    Fix caslat calculation
+    
+    Signed-off-by: John Traill <john.traill@freescale.com>
 
-* Update PK1C20 board
-  -Update base addresses for standard configuration
-  -Eliminate use of CACHE_BYPASS in board code
-  Patch by Scott McNutt, 08 Jun 2006
+commit 709d3073e74153278e7904a70819bbef7df50e1a
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Thu Aug 3 16:17:56 2006 -0500
 
-* Nios II - Fix I/O Macros and mini-app stubs
-  -Fix asm/io.h macros
-  -Eliminate use of CACHE_BYPASS in cpu code
-  -Eliminate assembler warnings
-  -Fix mini-app stubs and force no small data
-  Patch by Scott McNutt, 08 Jun 2006
+    Convert to mac-address in ethernet nodes.
 
-* Fix U-Boot environment sector protection on MCC200 board
+commit 71748af833ca1017edf1415be376366ff2937d17
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date:   Fri Jul 28 12:41:35 2006 -0400
 
-* Minor cleanup for PCS440EP board
+    Correct the irq value of DUART2
 
-* Update PCS440EP port to fit into one flash device (incl. environment)
-  Patch by Stefan Roese, 06 Jun 2006
+commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date:   Fri Jul 28 12:41:41 2006 -0400
 
-* Add support for PCS440EP board
-  Patch by Stefan Roese, 02 Jun 2006
+    Change the space size of PEX IO in README
 
-* Fix examples/Makefile; some build targets were lost
+commit 239db37c94f7a92941c4465feceb867c609241c5
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date:   Fri Jul 28 12:41:18 2006 -0400
 
-* Fix watchdog handling in CFI flash driver
-  Just use udelay() when waiting for status changes which will
-  implicitely trigger the watchdog.
+    Move get_board_sys_clk to board directory
 
-* Fix PCI to memory window size problems on PM82x boards
-  We use the "automatic" mode that was used for  the  MPC8266ADS  and
-  MPC8272 boards. Eventually this should be used on all boards?]
-  Patch by Wolfgang Grandegger, 17 Jan 2006
+commit 492900b985439fbce1a118afde1e35def870db03
+Author: John Traill <john.traill@freescale.com>
+Date:   Fri Jul 28 09:03:54 2006 +0100
 
-* Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstone
-  Patch by Stefan Roese, 29 May 2006
+    Fix 8641HPCN pollution
 
-* Update Intel IXP4xx support
-  - Add IXP4xx NPE ethernet MAC support
-  - Add support for Intel IXDPG425 board
-  - Add support for Prodrive PDNB3 board
-  - Add IRQ support
-  Patch by Stefan Roese, 23 May 2006
+commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
+Author: John Traill <john.traill@freescale.com>
+Date:   Fri Jul 28 08:16:06 2006 +0100
 
-* Fix problem in PVR detection for 440GR
-  Patch by Stefan Roese, 18 May 2006
+    Fix 8641HPCN timebase
 
-* Fix gcc 3.4.x AFLAGS setting for m68k platform.
+commit c86360b830f1eecd7a72208575dde4f57879faea
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date:   Fri Jul 28 00:01:34 2006 +0800
 
-* Enable autoboot for M5271EVB board.
+    Fixed OF device tree of mpc86xxhpcn board.
+    
+    The changes works in with kernel irq mapping rework.
+    
+    Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
 
-* Changed default ramdisk addr in yosemite/yellowstone ports
-  Patch by Stefan Roese, 15 May 2006
+commit bea3f28d285942bf3f7ab339ce85178ded544225
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date:   Wed Jul 12 10:48:05 2006 -0400
 
-* Fix PCMCIA support on virtlab2
+    Add support for reading and writing mac addresses to or from ID EEPROM.
+    
+    Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
+    With attached patch, we can use command "mac/mac read/mac save/"
+    to read and write EEPROM under u-boot prompt.
+    
+    U-boot will calculate the checksum of EEPROM while bootup,
+    if it is right, then u-boot will check whether the mac address
+    of eTSEC0/1/2/3 is availalbe (non-zero).
+    
+    If there is mac address availabe in EEPROM, u-boot will use it,
+    otherewise, u-boot will use the mac address defined in
+    MPC8641HPCN.h. This matches the requirement to set unique mac address
+    for each TSEC port.
+    
+    Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+    Signed-off-by: York Sun <yorksun@freescale.com>
 
-* Add support for VirtLab2 board
-  (needed because of differences in the PCMCIA hardware).
+commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
+Author: Jin Zhengxiong <Jason.Jin@freescale.com>
+Date:   Thu Jul 13 10:35:10 2006 -0500
 
-* Minor cleanup.
+    Fixed initrd issue by define big RAM
+    
+    Signed-off-by:Jason Jin <Jason.jin@freescale.com>
 
-* Update yosemite configuration to enable flash write buffer support
-  Patch by Stefan Roese, 10 May 2006
+commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
+Author: Jason Jin <Jason.jin@freescale.com>
+Date:   Fri Jul 7 10:01:45 2006 -0500
 
-* Fix compile warnings in common/xyzModem.c
-  Patch by Stefan Roese, 10 May 2006
+    We made a u-boot patch to fix the hang up issue
+    when booting filesystem from ramdisk.
+    
+    Signed-off-by:Jason Jin <Jason.jin@freescale.com>
 
-* Add support for AMCC 440EP Rev C and 440GR Rev B
-  Patch by John Otken, 08 May 2006
+commit 38433ccc5850ee70549af0b2bc5b920355ef5388
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:47:03 2006 -0500
 
-* OMAP 5912/OSK: update EMIFS CS1 timings:
-  Problems have been seen in the linux kernel's smc91x network driver
-  due to improper bus timings.  The latest 2.6 OMAP kernels currently
-  have a workaround, but this fix belongs in u-boot.
-  Patch by Kevin Hilman, 13 Oct 2005
+    * Switched default PCI speed for 8540 ADS back to 33MHz
+    * Added comments and a printf to warn that PCI-X won't
+      work at 33MHz
+      Patch by Andy Fleming 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-* Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports
-  Patch by Hiroki Kaminaga, 11 Mar 2006
+commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:46:35 2006 -0500
 
-* Update omap5912osk board support
-  - Fix OMAP support that omap5912osk compiles in current source tree
-  - Update with code from "http://omap.spectrumdigital.com/osk5912"
-    to fix problems with DDR initialization
-  - Fix timer setup
-  - Use CFI flash driver and support complete 32MB of onboard flash
-  - Add "print_cpuinfo()" and "checkboard()" functions to display
-    CPU (with frequency) and Board infos
-  Patch by Stefan Roese, 10 May 2006
+    * Fixed a bug where 8555 PCI code used the old variable and
+      function names
+      Patch by Andy Fleming 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-* Fix watchdog issues for ColdFire boards.
+commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:46:13 2006 -0500
 
-* Add M5271EVB board support.
+    * Added VIA configuration table
+    * Added support for PCI2 on CDS
+      Patch by Andy Fleming 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-* Make R5200 specific low level initialization board conditional.
+commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:45:41 2006 -0500
 
-* Update CPU target identification strings for ColdFire family.
+    * Fixed PCI memory definitions
+      Patch by Andy Fleming 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-* Update register definitions for MCF5271.
+commit 087454609e47295443af793a282cddcd91a5f49c
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:45:17 2006 -0500
 
-* Fix serial console support for MCF5271.
+    * Added support for initializing second PCI bus on 85xx
+      Patch by Andy Fleming 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-* Fixes for gcc 3.4 based m68k toolchain,
-  based on patch by Jate Sujjavanich.
+commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:44:49 2006 -0500
 
-* Fix lowboot support on MCC200 board
+    * Added PCI-X #defines for PCI-X initialization
+      Patch by Andy Fleming on 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-* Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
-  - Removed MPC8349ADS port
-  - Added PCI support to MPC8349ADS
-  - reworked memory map to allow mapping of all regions with BATs
-  Patch by Kumar Gala, 20 Apr 2006
+commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:44:23 2006 -0500
 
-* Coding Style cleanup
+    * Made sure the code which disables prefetch for PCI devices
+      sets the size of the prefetch region to 0
+      Patch by Andy Fleming on 17-Mar-2006
+    
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
 
-* Write RTC seconds first to maintain settings integrity per
-  Maxim/Dallas DS1306 data sheet.
-  Patch by Alan J. Luse, 02 May 2006
+commit 40d5fa35d02df22580593bf0039ab173367e8ef0
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:43:36 2006 -0500
 
-* Scheduled for removal: strnicmp() which is unused
+    * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
+      Patch by Jon Loeliger 17-Jan-2006
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Update for Intel Monahans boards:
-  - support for magic key detection and handling on delta board
-  - NAND support for zylonite board + some minor cleanup
+commit be7e8b0cb5a0c49dc180075b96df296a893bf146
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:43:00 2006 -0500
 
-* Declare load_serial_ymodem() when using CFG_CMD_LOADB.
-  Patch by Jon Loeliger, 01 May 2006
+    * Removed the oftree.dts for stxxtx in light of the changes
+      to the flat device tree handling code
+      Patch by Matthew McClintock 26-June-2006
 
-* Fixed handling of bad checksums with "mkimage -l"
+commit 1b380ec225665e73959677f3893dc658c5925e05
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:42:24 2006 -0500
 
-* Added support for BC3450 board
-  Patch by Stefan Strobl, 21 Oct 2005
+    * Patch to modify ft_build.c to update flat device trees in place
+      Patch by Matthew McClintock 26-June-2006
 
-* Update for NC650 board:
-  - Support rev1 and rev2 hardware
-  - adapt to new NAND layer
-  - add CP850 configuration based on NC650
+commit 98a9c4d468a942a09ebe8979bec508017f3e4462
+Author: Matthew McClintock <msm@freescale.com>
+Date:   Wed Jun 28 10:41:37 2006 -0500
 
-* MPC5200: enable snooping of DMA transactions on XLB even if no PCI
-  is configured; othrwise DMA accesses aren't cache coherent which
-  causes for example USB to fail.
+    * Modify bootm command to support booting with flat device trees
+      Patch by Matthew McClintock 26-June-2006
 
-* Some code cleanup
+commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
+Author: Jin Zhengxiong <Jason.Jin@freescale.com>
+Date:   Wed Jun 28 08:43:56 2006 -0500
 
-* Fix dbau1x00 boards broken by dbau1550 patch
-  PLL:s were not set for boards other than 1550.
-  Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
-  Default boot is now bootp for cards other than 1550.
-  Patch by Thomas Lange, 10 Aug 2005
+    Change Id to symbolic name for RTL8139
+    
+    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
 
-* Fixes common/cmd_flash.c:
-  - fix some compiler/parser error, if using m68k tool chain
-  - optical fix for protect on/off all messages, if using more
-    then one bank
-  Patch by Jens Scharsig, 28 Jul 2005
+commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
+Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
+Date:   Tue Jun 27 18:12:10 2006 +0800
 
-* Fix Quad UART mapping on MCC200 board due to new HW revision
+    Fix RTL8139 in big endian
+    
+    signed-off-by: Jason Jin <Jason.Jin@freescale.com>
+    signed-off-by: Wei Zhang <wei.zhang@freescale.com>
 
-* Fix JFFS2 support for legacy NAND driver.
+commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
+Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
+Date:   Tue Jun 27 18:12:23 2006 +0800
 
-* Remove dependencies between DoC code and old legacy NAND driver.
+    Fix Tsec bug when no link
+    
+     When tftp a non-exist file from the tftp server, u-boot will check
+     the link of all eth port. The original file will return wrong link
+     state on the no link ports.
+    
+    signed-off-by: Jason Jin <Jason.Jin@freescale.com>
 
-* Fix PM828_PCI target, for which PCI was *not* configured in.
+commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
+Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
+Date:   Tue Jun 27 18:12:02 2006 +0800
 
-* Fix Lite5200B support: initialize SDelay register
-  See Freescale's AN3221 "MPC5200B SDRAM Initialization and
-  Configuration", 3.3.1 SDelay--MBAR + 0x0190
+    Fix bug for io_bar size during pci scan
+    
+    During the pci scan process, Some devices return bar_reponse with the
+    highest bytes 0, such as the pci bridge in uli1575 return bar_response
+    with 0xffffff, So the bar_size should be manually set under 64K.
+    
+    Signed-off-by: Jason Jin <jason.jin@freescale.com>
 
-* Changes/fixes for drivers/cfi_flash.c:
+commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
+Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
+Date:   Tue Jun 27 18:11:54 2006 +0800
 
-  - Add Intel legacy lock/unlock support to common CFI driver
+    Enable PCIE1 for MPC8641HPCN board
+    
+    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
 
-    On some Intel flash's (e.g. Intel J3) legacy unlocking is
-    supported, meaning that unlocking of one sector will unlock
-    all sectors of this bank. Using this feature, unlocking
-    of all sectors upon startup (via env var "unlock=yes") will
-    get much faster.
+commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Thu Jun 22 08:51:46 2006 -0500
 
-  - Fixed problem with multiple reads of envronment variable
-    "unlock" as pointed out by Reinhard Arlt & Anders Larsen.
+    Fix bug in 8641hpcn reset command with no args.
+    
+    Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+    Acked-by: Jon Loeliger <jdl@freescale.com>
 
-  - Removed unwanted linefeeds from "protect" command when
-    CFG_FLASH_PROTECTION is enabled.
+commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date:   Tue Jun 20 17:47:15 2006 +0800
 
-  - Changed p3p400 board to use CFG_FLASH_PROTECTION
+    Reworked IRQ mapping in OF-tree.
 
-  Patch by Stefan Roese, 01 Apr 2006
+commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Thu Jun 15 21:33:37 2006 -0500
 
-* Changes/fixes for drivers/cfi_flash.c:
-  - Correctly handle the cases where CFG_HZ != 1000 (several
-    XScale-based boards)
-  - Fix the timeout calculation of buffered writes (off by a
-    factor of 1000)
-  Patch by Anders Larsen, 31 Mar 2006
+    Do not enable address translation on secondary CPUs.
+    Do not set up BATs on secondary CPUs.  Let Linux do the nasty.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
+commit 8ecc971618f56029ad99d3516f8b297a6ed58971
+Author: Jon Loeliger <jdl@jdl.com>
+Date:   Wed Jun 7 10:53:55 2006 -0500
 
-  405 SDRAM: - The SDRAM parameters can now be defined in the board
-	       config file and the 405 SDRAM controller values will
-	       be calculated upon bootup (see PPChameleonEVB).
-	       When those settings are not defined in the board
-	       config file, the register setup will be as it is now,
-	       so this implementation should not break any current
-	       design using this code.
+    Fix a get_board_sys_clk() use-before-def warning.
+    
+    Signed-off-by: Jon Loeliger <jdl@jdl.com>
 
-	       Thanks to Andrea Marson from DAVE for this patch.
+commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
+Author: Jon Loeliger <jdl@jdl.com>
+Date:   Wed Jun 7 10:52:49 2006 -0500
 
-  440 DDR:   - Added function sdram_tr1_set to auto calculate the
-	       TR1 value for the DDR.
-	     - Added ECC support (see p3p440).
+    Allow DTC path to be passed in.
+    
+    Signed-off-by: Jon Loeliger <jdl@jdl.com>
 
-  Patch by Stefan Roese, 17 Mar 2006
+commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date:   Tue Jun 6 16:54:29 2006 -0400
 
-* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
-  Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
+    Modify the IRQ of DUART2
 
-* Add support for ymodem protocol download
-  Patch by Stefano Babic, 29 Mar 2006
+commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
+Author: Jon Loeliger <jdl@jdl.com>
+Date:   Wed May 31 13:55:35 2006 -0500
 
-* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
-  Merge from Markus Klotzbücher's repo, 01 Apr 2006
+    Review cleanups.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* GCC-4.x fixes: clean up global data pointer initialization for all
-  boards
+commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
+Author: Jon Loeliger <jdl@jdl.com>
+Date:   Wed May 31 12:44:44 2006 -0500
 
-* Update for Delta board:
-  - redundant NAND environment
-  - misc Monahans cleanups (remove dead code etc.)
-  - DA9030 Initialization; some minimal changes to PXA I2C driver to
-    make it work with the Monahans.
-  - Make Monahans clock frequency configurable using
-    CFG_MONAHANS_RUN_MODE_OSC_RATIO and
-    CFG_MONAHANS_TURBO_RUN_MODE_RATIO.
-  Merge from Markus Klotzbücher's repo, 25 Mar 2006
+    White space cleanup.
+    Some 80-column cleanups.
+    Convert printf() to puts() where possible.
+    Use #include "spd_sdram.h" as needed.
+    Enhanced reset command usage message a bit.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Enable Quad UART om MCC200 board.
+commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
+Author: Jon Loeliger <jdl@jdl.com>
+Date:   Wed May 31 11:39:34 2006 -0500
 
-* Cleanup MCC200 board configuration; omit non-existent stuff.
+    Removed unneeded local_bus_init() from 8641HPCN board.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Add support for MPC859/866 Rev. A.0
+commit 4d3d729c16c392d2982d3266b659d333c927697d
+Author: Jon Loeliger <jdl@jdl.com>
+Date:   Wed May 31 11:24:28 2006 -0500
 
-* Add command for handling DDR ECC registers on MPC8349EE MDS board.
+    Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Fix DDR ECC bit definitions for MPC83xx.
+commit b2a941de060350ad15878d8219825f4950e9bb8e
+Author: Jon Loeliger <jdl@jdl.com>
+Date:   Wed May 31 10:07:28 2006 -0500
 
-* Add initial support for MPC8349E MDS board.
+    Remove dead debug code.
+    
+    Signed-off-by: Jon Loeliger <jdl@jdl.com>
 
-* Add support for ECC DDR initialization on MPC83xx.
+commit 126aa70f10ba3d20e0a6f4d32328250513b77770
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue May 30 17:47:00 2006 -0500
 
-* Add DMA support for MPC83xx.
+    Move mpc86xx PIXIS code to board directory
+    
+    First cut at moving the PIXIS platform code out of
+    the 86xx cpu directory and into board/mpc8641hpcn
+    where it belongs.
+    
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-* Add sync in do_reset() routine for MPC83xx after RPR register
-  was written to. It is need on some targets when BAT translation
-  is enabled.
+commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:   Tue May 30 09:10:32 2006 -0500
 
-* Add bit definitions for MPC83xx DDR controller registers.
+    Improve "reset" command's interaction with watchdog.
+    
+        "reset altbank" will reset another bank WITHOUT watch dog timer enabled
+        "reset altbank wd" will reset another bank WITH watch dog enabled
+        "diswd" will disable watch dog after u-boot boots up successfully
+    
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
 
-* Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
+commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:   Tue May 30 08:51:19 2006 -0500
 
-* Correct shift offsets in icache_status and dcache_status for MPC83xx.
+    Fix two SDRAM setup bugs.
+    
+        Fix ECC setup bug.
+        Enable 1T/2T based on number of DIMMs present.
+    
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
 
-* Add support for DS1374 RTC chip.
+commit d11fec5015334deb2010e36ce00bb118cc5429a5
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:   Fri May 26 10:24:48 2006 -0500
 
-* Add support for Lite5200B board.
-  Patch by  Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
+    Add first draft of the MPC8641HPCN doc/README.
+    
+    Signed-off-by: Jon Loeliger <jdl@jdl.com>
 
-* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific
-  timer and cpu_reset code from cpu/$(CPU) into the new
-  cpu/$(CPU)/$(SOC) directories
-  Patch by Andreas Engel, 13 Mar 2006
+commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:   Fri May 26 10:13:04 2006 -0500
 
-* Change max size of uncompressed uImage's to 8MByte and add
-  CFG_BOOTM_LEN to adjust this setting.
+    Added pci@8000 block.
+    Updated ethernet interrupt mappings (moved up 48).
+    Cleaned up a few comments.
+    
+    Signed-off-by: Jon Loeliger <jdl@jdl.com>
 
-  As mentioned by Robin Getz on 2005-05-24 the size of uncompressed
-  uImages was restricted to 4MBytes. This default size is now
-  increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN
-  in the board config file.
+commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:   Fri May 26 10:01:16 2006 -0500
 
-  Patch by Stefan Roese, 13 Mar 2006
+    Allow args on reset command.
+    
+    Signed-off-by: Jon Loeliger <jdl@jdl.com>
 
-* Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
-  Patch by Stefan Roese, 13 Mar 2006
+commit 14e37081ff3cac7ebe6e93836523429853b6b292
+Author: Jon Loeliger <jdl@jdl.com>
+Date:   Fri May 19 13:28:39 2006 -0500
 
-* cpu/ppc4xx/start.S : exceptions are enabled after relocation
-  Patch by Cedric Vincent, 06 Jul 2005
+    Change arbitration to round-robin for SMP linux.
 
-* au1x00_eth.c: check malloc return value and abort if it failed
-  Patch by Andrew Dyer, 26 Jul 2005
+commit 9a655876e5995be80f49054e2509500e871e4d3a
+Author: Jon Loeliger <jdl@jdl.com>
+Date:   Fri May 19 13:26:34 2006 -0500
 
-* Change the sequence of events in soft_i2c.c:send_ack() to keep from
-  incorrectly generating start/stop conditions on the bus.
-  Patch by Andrew Dyer, 26 Jul 2005
+    Enable dual DDR controllers and interleaving.
 
-* Fix bug in [id]cache_status commands for MPC85xx processors;
-  should look at LSB of L1CSRn registers to determine if L1 cache is
-  enabled, not the MSB.
-  Patch by Murray Jensen, 19 Jul 2005
+commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
+Author: Jon Loeliger <jdl@jdl.com>
+Date:   Fri May 19 13:22:44 2006 -0500
 
-* Fix array overflow with fw_setenv on uninitialised environment
-  Patch by Murray Jensen, 15 Jul 2005
+    Update 86xx address map and LAWBARs.
 
-* Add support for EmbeddedPlanet EP88x boards
-  Patch by Yuli Barcohen, 13 Jul 2005
+commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
+Author: Jon Loeliger <jdl@jdl.com>
+Date:   Fri May 19 13:14:15 2006 -0500
 
-* Remove board specific configuration includes from the common xilinx
-  ethernet and iic adapter code.
-  Patch by Michael Libeskind, 12 Jul 2005
+    Remove L2 Cache invalidate polling.
 
-* Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
-  Patch by Murray Jensen, 08 Jul 2005
+commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
+Author: Jon Loeliger <jdl@jdl.com>
+Date:   Fri May 19 12:33:09 2006 -0500
 
-* Add (some) definitions for the MPC85xx local bus controller
-  Patch by Murray Jensen, 08 Jul 2005
+    Enable 2nd CPU and I2C.
 
-* Add CPM2 I/O pin functions for MPC85xx processors
-  Patch by Murray Jensen, 08 Jul 2005
+commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Mon May 15 07:26:56 2006 -0500
 
-* Fix compile problem
+    Update interrupt mapping.
 
-* Added PCI support for MPC8349ADS board
-  Patch by Kumar Gala 11 Jan 2006
+commit 6cfea33477b04b63ed47386ed1629529484c33ba
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:   Wed May 10 09:38:06 2006 -0500
 
-* Enable address translation on MPC83xx
-  Patch by Kumar Gala, 10 Feb 2006
+    Remove unneeded INIT_RAM_LOCK cache twiddling.
+    Correctly tracks r29 as global data pointer now.
+    
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
 
-* Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx
-  Patch by Kumar Gala, 25 Jan 2006
+commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Wed May 10 09:33:07 2006 -0500
 
-* Fixed defines for MPC83xx SICRL register to match current specs
-  Patch by Kumar Gala, 23 Jan 2006
+    Remove unnecessary flash.c file.
 
-* Only disable the MPC83xx watchdog if its enabled out of reset.
-  If its disabled out of reset SW can later enable it if so desired
-  Patch by Kumar Gala, 11 Jan 2006
+commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Tue May 9 08:23:49 2006 -0500
 
-* Allow config of GPIO direction & data registers at boot on 83xx
-  Patch by Kumar Gala, 11 Jan 2006
+    Get MPC8641HPCN flash images working.
+    
+        Enable the CFI driver.
+        Remove bogus LAWBAR7 cruft.
+        Use correct TEXT_BASE, Fixup load script.
+        Enable SPD EEPROM during DDR setup.
+        Use generic RFC 1918 IP addresses by default.
 
-* Enable time handling on 83xx
-  Patch by Kumar Gala, 11 Jan 2006
+commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Thu Apr 27 10:15:16 2006 -0500
 
-* Make System IO Config Registers board configurable on MPC83xx
-  Patch by Kumar Gala, 11 Jan 2006
+    Cleanup whitespaces and style issues.
+    Removed //-style comments.
+    Use 80-column lines.
+    Remove trailing whitespace.
+    Remove dead code and debug cruft.
 
-* Fixed PCI indirect config ops to handle multiple PCI controllers
-  We need to adjust the bus number we are trying to access based
-  on which PCI controller its on
-  Patch by Kumar Gala, 12 Jan 2006
+commit a2320a6bf8113a09544c42d160d10ac69d049a03
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Thu Apr 27 08:22:39 2006 -0500
 
-* Report back PCI bus when doing table based device config
-  Patch by Kumar Gala, 11 Jan 2006
+    Revert bad PCI prefetch limit change.
 
-* Added support for PCI prefetchable region and BARs
-  If a host controller sets up a region as prefetchable and
-  a device's BAR denotes it as prefetchable, allocate the
-  BAR into the prefetch region.
+commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
+Author: Jon Loeliger <jdl@freescale.com>
+Date:   Wed Apr 26 17:58:56 2006 -0500
 
-  If a BAR is prefetchable and no prefetchable region has
-  been setup by the controller we fall back to allocating
-  the BAR into the normally memory region.
-  Patch by Kumar Gala, 11 Jan 2006
-
-* Add helper function for generic flat device tree fixups for mpc83xx
-  Patch by Kumar Gala, 11 Jan 2006
-
-* Add support for passing initrd information via flat device tree
-  Patch by Kumar Gala, 11 Jan 2006
-
-* Added OF_STDOUT_PATH and OF_SOC
-
-  OF_STDOUT_PATH specifies the path to the device the kernel can use
-  for console output
-
-  OF_SOC specifies the proper name of the SOC node if one exists.
-  Patch by Kumar Gala, 11 Jan 2006
-
-* Allow board code to fixup the flat device tree before booting a kernel
-  Patch by Kumar Gala, 11 Jan 2006
-
-* Added CONFIG_ options for bd_t and env in flat dev tree
-
-	CONFIG_OF_HAS_BD_T will put a copy of the bd_t
-	into the resulting flat device tree.
-
-	CONFIG_OF_HAS_UBOOT_ENV will copy the environment
-	variables from u-boot into the flat device tree
-
-  Patch by Kumar Gala, 11 Jan 2006
-
-* Add support for the DHCP vendor optional bootfile (#67).
-  Ignores the vendor TFTP server name option (#66).
-  Patch by Murray Jensen, 30 Jun 2005
-
-* Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode
-  Patch by Andy Fleming, 14 Jun 2005
-
-* Fix bad register definitions for LTX971 PHY on MPC85xx boards.
-  Patch by Gerhard Jaeger, 21 Jun 2005
-
-* Add netconsole and some more commands to RPXlite_DW board
-  Patch by Sam Song, 19 Jun 2005
-
-* Fix bad declaration on pci_cfgfunc_nothing
-  Patch by Sam Song, 19 Jun 2005
-
-* Adjust "echo" as a default command
-  Patch by Sam Song, 19 Jun 2005
-
-* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
-  Patch by KokHow Teh, 16 Jun 2005
-
-* Add crc of data to jffs2 (in jffs2_1pass_build_lists()).
-  Patch by Rick Bronson, 15 Jun 2005
-
-* Coding Style cleanup
-
-* Avoid dereferencing NULL in find_cmd() if no valid commands were found
-  Patch by Andrew Dyer, 13 Jun 2005
-
-* Add ADI Blackfin support
-  - add support for Analog Devices Blackfin BF533 CPU
-  - add support for the ADI BF533 Stamp uClinux board
-  - add support for the ADI BF533 EZKit board
-  Patches by Richard Klingler, 11 Jun 2005
-
-* Add loads of ntohl() in image header handling
-  Patch by Steven Scholz, 10 Jun 2005
-
-* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
-  variable to set clock
-  Patch by Yuli Barcohen, 05 Jun 2005
-
-* RPXlite configuration fixes
-  - Use correct flash sector size
-  - Use correct memory test end address
-  - Add support for bzip2 compression
-  - Various small fixes
-  Patch by Yuli Barcohen, 05 Jun 2005
-
-* Memory configuration changes for ZPC.1900 board
-  - Fix SDRAM timing on both local bus and 60x bus
-  - Add support for second flash bank (SIMM)
-  - Change boot flash base
-  Patch by Yuli Barcohen, 05 Jun 2005
-
-* Add support for Adder boards with 16MB SDRAM;
-  add support for second FEC on Adder87x board.
-  Patch by Yuli Barcohen, 05 Jun 2005
-
-* Fix conditional for including ks8695eth driver
-  Patch by Greg Ungerer, 04 Jun 2005
-
-* Fix Makefile: include config.mk only after CROSS_COMPILE is defined
-  Patch by Friedrich Lobenstock, 02 Jun 2005
-
-* Fix comment in common/soft_i2c.c
-  Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
-
-* Cleanup compiler warnings.
-  Patch by Greg Ungerer, 21 May 2005
-
-* Word alignment fixes for word aligned NS16550 UART
-  Patch by Jean-Paul Saman, 01 Mar 2005
-
-  Fixes bug with UART that only supports word aligned access: removed
-  "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
-  (broken!) versions of GCC generate byte accesses when encountering
-  the packed attribute regardless if the struct is already correctly
-  aligned for a platform. Peripherals that can only handle word
-  aligned access won't work properly when accessed with byte access.
-  The struct NS16550 is already word aligned for REG_SIZE = 4, so
-  there is no need to packed the struct in that case.
-
-* Fix behaviour if gatewayip is not set
-  Patch by Robin Gilks, 23 Dec 2004
-
-* Fix cleanup for netstart board.
-  Remove build results from repository
-
-* Some code cleanup for GCC 4.x
-
-* Fixes to support environment in NAND flash;
-  enable NAND flash based environment for delta board.
-
-* Add support for Intel Monahans CPU on Zylonite and Delta boards
-  (This is Work in Progress!)
-
-* Add support for TQM8260-AI boards.
-
-* Minor code cleanup
-
-* Merge the new NAND code (testing-NAND brach); see doc/README.nand
-  Rewrite of NAND code based on what is in 2.6.12 Linux kernel
-  Patch by Ladislav Michl, 29 Jun 2005
-
-* Add lowboot target to mcc200 board
-  Patch by Stefan Roese, 4 Mar 2006
-
-* Fix problem with flash_get_size() from CFI driver update
-  Patch by Stefan Roese, 1 Mar 2006
-
-* Make CFG_NO_FLASH work on ARM systems
-  Patch by Markus Klotzbuecher, 27 Feb 2006
-
-* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
-  use hush shell.
-
-* Convert mcc200 to use common CFI flash driver
-  Patch by Stefan Roese, 28 Feb 2006
-
-* Add env-variable "unlock" to handle initial state of sectors
-  (locked/unlocked).
-
-  Only the U-Boot image and it's environment is protected,
-  all other sectors are unprotected (unlocked) if flash
-  hardware protection is used (CFG_FLASH_PROTECTION) and
-  the environment variable "unlock" is set to "yes".
-
-  Patch by Stefan Roese, 28 Feb 2006
-
-* Update drivers/cfi_flash.c:
-  - find_sector() called in both versions of flash_write_cfiword()
-  Patch by Peter Pearse, 27th Feb 2006
-
-* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
-  Patch by Jose Maria Lopez, 16 Jan 2006
-
-* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
-  Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
-
-* Changes/fixes for drivers/cfi_flash.c:
-  We *should* check if there are any error bits if the previous call
-  returned ERR_OK (Otherwise we will have output an error message in
-  flash_status_check() already.)  The original code would only check for
-  error bits if flash_status_check() returns ERR_TIMEOUT.
-  Patch by Marcus Hall, 23 Aug 2005
-
-* Changes/fixes for drivers/cfi_flash.c:
-  - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
-  - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
-  Patch by Sangmoon Kim, 19 Aug 2005
-
-* Fixes for drivers/cfi_flash.c:
-  - Fix wrong timeout value usage in flash_status_check()
-  - Round write_tout up when converting to msec in flash_get_size()
-  - Remove clearing flash status at the end of flash_write_cfibuffer()
-    which sets Intel 28F640J3 flash back to command mode on CSB472
-  Patch by Tolunay Orkun, 02 July 2005
-
-* Add basic support for the SMMACO4 Board from PanDaCom.
-  Patch by Heiko Schocher, 20 Feb 2006
-
-* Add GIT version information (commid ID) to untagged U-Boot versions
-
-  As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
-  of all unreleased (untagged) U-Boot images will be automatically
-  extended upon compiletime with a part of the GIT commit ID and
-  possibly with "dirty" if uncommited changes are detected.
-
-  Here an example for the resulting version:
-  "U-Boot 1.1.4-g3457ac18-dirty"
-
-  The version is now maintained in the toplevel Makefile and the
-  version headers are autogenerated.
-
-  Patch by Stefan Roese, 9 Feb 2006
-
-* Update default environment for INKA4x00 board.
-
-* Convert CPCI750 to use common CFI flash driver
-  Patch by Reinhard Arlt, 8 Feb 2006
-
-* Various changes to esd HH405 board specific files
-  Patch by Matthias Fuchs, 07 Feb 2006
-
-* Cleanup U-Boot boot messages on ARM.
-
-  To match the U-Boot user interface on ARM platforms to the U-Boot
-  standard (as on PPC platforms), some messages with debug character
-  are removed from the default U-Boot build.
-  Enable DEBUG for lib_arm/board.c to enable debug messages.
-  New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
-  Patch	 by Stefan Roese, 24 Jan 2006
-
-* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
-  Patch by Stefan Roese, 18 Jan 2006
-
-* Add VGA support (CT69000) to CPCI750 board.
-  Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
-  Patch by Reinhard Arlt, 30 Dec 2005
-
-* PMC405 and CPCI405: Moved configuration of pci resources
-  into config file.
-  PMC405 and CPCI2DP: Added firmware download and booting via pci.
-  Patch by Matthias Fuchs, 20 Dec 2005
-
-* Add ColdFire targets to MAKEALL script
-  Patch by Zachary Landau, 26 Jan 2006
-
-* Add support for r5200 board
-  Patch by Zachary Landau, 26 Jan 2006
-
-* Add support for Freescale M5271 processor
-  Patch by Zachary Landau, 26 Jan 2006
-
-* Fix 28F256J3A support on PM520 board
-  (without bank-switching only 32 MB can be accessed)
-
-* Fix mkimage bug with multifile images created on 64 bit systems.
-
-* Add support for 28F256J3A flash (=> 64 MB) on PM520 board
-
-* Fix compiler problem with at91rm9200dk board.
-  Patch by Eugen Bigz, 19 Dec 2005
-
-======================================================================
-Changes for U-Boot 1.1.4:
-======================================================================
-
-* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
-  - Changed GPIO setup to enable another address line in order to
-    address 64M of FLASH.
-  - Added function sdram_tr1_set to auto calculate the tr1 value for
-    the DDR.
-  Patch by Steven Blakeslee, 12 Dec 2005
-
-* MPC5200:  Set PCI retry counter to 0 = infinite retry;
-  The default of 255 is too short for slow devices.
-  Patch by Martin Nykodym, 12 Dec 2005
-
-* Change port configuration for O2DNT (CODEC1 on PSC1).
-
-* Fix register for PCI async mode on PPC440EP
-  Patch by Youngchul Bang, 08 Dec 2005
-
-* Fix U-Boot linking problems (add .eh_frame segment to linker script)
-  This segment may be required by some libgcc.a functions
-  (like _udivdi3).
-
-* Fix DPRAM offset/size for MPC8541/8555.
-  Simplify TQM85xx Makefile handling.
-
-* Fix data overflow (typo?) in rtc/ds1302.c
-
-* Fix U-Boot compilation for MIPS boards using ELDK 4.0
-
-* Add support for TQM8541/8555 boards, TQM85xx support reworked:
-  - Support for TQM8541/8555 boards added.
-  - Complete rework of TQM8540/8560 support.
-  - Common TQM85xx code now supports all current TQM85xx platforms
-    (TQM8540/8541/8555/8560).
-  - DDR SDRAM size detection added.
-  - CAS latency default values can be overwritten by setting "serial#"
-    to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
-    If problems are detected with this non default CAS latency,
-    the default values will be used instead.
-  - Flash size detection added.
-  - Moved FCC ethernet driver initialization behind TSEC driver init
-    -> TSEC is first device.
-  Patch by Stefan Roese, 30 Nov 2005
-
-* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
-  Patch by John Otken, 23 Nov 2005
-
-* Changed PPC44x startup message (cpu info, speed...) to common style:
-  On PPC44x platforms, the startup message generated in "cpu.c" only
-  comprised the ppc type and revision but not additional information
-  like speed etc. Those speed infos where printed in the board specific
-  code. This new implementation now prints all CPU infos in the common
-  cpu specific code. No board specific code is needed anymore and
-  therefore removed from all current 44x implementations.
-  Patch by Stefan Roese, 27 Nov 2005
-
-* Adjust TQM834x PHY addresses for latest hardware revision.
-
-* Increase malloc arena on TQM5200 board to 256 kB.
-  With 64 kb uniform flash sector size the old value of 128 kB was
-  too small.
-
-* Fix miiphy global data initialization (problem on 4xx boards when
-  no ethaddr is assigned). Initialization moved from
-  miiphy_register() to eth_initialize().
-
-  Based on initial patch for 4xx platform by Matthias Fuchs.
-
-* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
-
-* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
-  The COPYING file was extended to make clear that these files can be
-  used in non-GPL code, too.
-  Also, a corresponding note was placed in the headers of the affected files.
-
-* Add support for Prodrive P3P440 board:
-  - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
-  - CFG_FLASH_QUIET_TEST added to use the common CFI driver
-    for bank autodetection
-  Patch by Stefan Roese, 22 Nov 2005
-
-* Change all '$(...)' variable references into '${...}'
-  which makes the environment compatible with the hush shell.
-  WARNING: Support for the old '$(...)' syntax will be
-  discontinued in a later version.
-
-* Minor changes to init flags in TQM834x PCI.
-
-* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
-  Patch by Stefan Roese, 15 Nov 2005
-
-* New PPC 405EP board added: CMS700
-  Added CONFIG_NET_MULTI for VOM405 board.
-  Added reset_phy() for VOM405 board.
-  Patch by Matthias Fuchs, 09 Nov 2005
-
-* Updated PCI mapping for esd CPCI2DP board.
-  Add support for error LED.
-  Patch by Matthias Fuchs, 07 Nov 2005
-
-* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
-  Patch by Stefan Roese, 07 Nov 2005
-
-* Correct PPC Timebase register definitions (SPRN_TBRL...)
-  Patch by Stefan Roese, 07 Nov 2005
-
-* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
-  Patch by Stefan Roese, 05 Nov 2005
-
-* Additional fix for external IRQ config on Yellowstone & Yosemite
-  Patch by Stefan Roese, 03 Nov 2005
-
-* Add support for Ocotea pass 3 with 440GX Rev. F
-  Patch by Stefan Roese, 01 Nov 2005
-
-* Fix external IRQ configuration on Yellowstone & Yosemite
-  Patch by Stefan Roese, 28 Oct 2005
-
-* Add support for multiple PHYs.
-  Tested on the following boards:
-	cmcpu2	    (at91rm9200/ether.c)
-	PPChameleon (ppc4xx/4xx_enet.c)
-	yukon	    (mpc8220/fec.c)
-	uc100	    (mpc8xx/fec.c)
-	tqm834x	    (mpc834x/tsec.c) with EEPRO100
-	lite5200    (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
-  Main changes include:
-  common/miiphyutil.c
-  - miiphy_register routine was added to allow multiple PHYs to be registered
-  - miiphy_read and miiphy_write are now defined in this file, and
-    require additional argument (char *devname)
-  - other miiphy_* routines also require additional device name argument
-  ../lib_i386/board.c
-  ../lib_ppc/board.c
-  Calling reset_phy() was moved to be executed *after* eth_initialize().
-  This is necessary as now some of the implementations of reset_phy()
-  may need to use miiphy_reset() which is not allowed before eth_initialize()
-  as eth_initialize registers all required miiphy_* routines.
-  Tested on IP860 and PHY initializes properly after this change.
-
-* Correct includes for flat tree builder.
-
-* Fix conflicting types (flash_write()) in trab auto_update.c.
-
-* Add PCI support for the TQM834x board.
-
-* Add missing 4xx board to MAKEALL
-  Patch by Stefan Roese, 20 Oct 2005
-
-* Fix conflicting types (flash_write()) in esd auto_update.c
-  Patch by Stefan Roese, 20 Oct 2005
-
-* Fix problem with sleep in NetConsole (use get_timer())
-  Patch by Stefan Roese, 20 Oct 2005
-
-* Add NetConsole Support for AMCC eval boards
-  Patch by Stefan Roese, 20 Oct 2005
-
-* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
-  Patch by Stefan Roese, 18 Oct 2005
-
-* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
-  Fix identation on ext2ls help entry.
-  Patch by Stefan Roese, 14 Oct 2005
-
-* Add support for TQM834x boards.
-  Cleanup.
-
-* Cleanup for GCC-4.x
-
-* Add documentation for Open Firmware Flat Tree and usage.
-  Patch by Pantelis Antoniou, 13 Oct 2005
-
-* Add missing files for Pantelis Antoniou's patch
-  Patch by Pantelis Antoniou, 04 Sep 2005
-
-* Fix problem in ppc4xx eth-driver without ethaddr (only without
-  CONFIG_NET_MULTI set)
-  Patch by Stefan Roese, 10 Oct 2005
-
-* Fix gzip bmp support (test if malloc fails, warning when truncated).
-  Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
-  Patch by Stefan Roese, 07 Oct 2005
-
-* Add support for OF flat tree for the STXtc board.
-  Patch by Pantelis Antoniou, 04 Sep 2005
-
-* Support passing of OF flat trees to the kernel.
-  Patch by Pantelis Antoniou, 04 Sep 2005
-
-* Cleanup
-
-* Add support for NetSilicon NS7520 processor.
-  Patch by Art Shipkowski, 12 May 2005
-
-* Add support for AP1000 board.
-  Patch by James MacAulay, 07 Oct 2005
-
-* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
-  Patch by Anders Larsen, 07 Oct 2005
-
-  The Atmel errata #11 states that the transfer buffer descriptor
-  table must be aligned on a 16-word boundary. As it turned out, this
-  is insufficient - it seems the table must be aligned on a boundary
-  at least as large as the table itself (in Linux this is not an
-  issue - the table is aligned on a PAGE_SIZE (4096) boundary).
-
-* Fixed compilation for ARM when using a (standard) hard-FP toolchain
-  Patch by Anders Larsen, 07 Oct 2005
-
-* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
-  sed the linker scripts, rather than pre-process them.
-  Patch by Peter Pearse, 07 Oct 2005
-
-* Update make target for ARM supported boards.
-  Use lowlevel_init() instead of platformsetup() [rename].
-  Patch by Peter Pearse, 06 Oct 2005
-
-* Fix booting from serial dataflash on AT91RM9200
-  Patch by Peter Menzebach, 29 Aug 2005
-
-* Add JFFS2 support for TRAB board
-  Patch by Martin Krause, 25 Aug 2005
-
-* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
-  Patch by Marcus Hall, 24 Aug 2005
-
-* Fix the machine-id of the Cogent csb637 board
-  Patch by Anders Larsen, 05 Oct 2005
-
-* Complete support for the KwikByte KB920x boards
-  Patch by Anders Larsen, 05 Oct 2005
-
-* Set the AT91RM9200 clock to asynchronous mode
-  Patch by Anders Larsen, 03 May 2005
-
-* Set the AT91RM9200 clock to synchronous mode
-  Patch by Anders Larsen, 29 Apr 2005
-
-* Add support for Cogent csb637
-  Patch by Anders Larsen, 29 Apr 2005
-
-* Fix dm9161.c initialization
-  Patch by Anders Larsen, 29 Apr 2005
-
-* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
-  (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
-
-* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
-  Patch by Anders Larsen, 29 Apr 2005
-
-* Fix device partition intialization for SystemACE disks.
-  Patch by Stephen Williams, 28 Apr 2005
-
-* Added support for KwikByte KB920x boards (based on AT91RM9200)
-  Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
-
-* Add support for S29GL064M-R3 flash chip on xsengine board
-  Patch by Kurt Stremerch, 18 Apr 2005
-
-* E500 update: repoint IVPR to RAM when code is relocated
-  Patch by Kylo Ginsberg, 13 Apr 2005
-
-* Fix loop end test in lib_generic/string.c:strswab()
-  Patch by Andrew Dyer, October 10, 2005
-  Signed-off-by: Andrew Dyer <amdyer@gmail.com>
-
-* Cleanup
-
-* Update ARM Integrator boards:
-  Correct addessing errors in platform files.
-  Split off common core module data from Integrator header files to
-  include/armcoremodule.h.
-  Patch by Peter Pearse, 04 Oct 2005
-
-* Make sure only supported compiler options are used
-  Import "cc-option" shell function from kernel and
-  use it to get the correct ARM GCC options for individual CPUs
-  Patch by Peter Pearse, 30 Jun 2005
-
-* Fix 440GR to print correct cpu revision
-  Patch by Stefan Roese, 04 Oct 2005
-
-* Change board message on AMCC Yosemite & Yellowstone to common style
-  Patch by Stefan Roese, 03 Oct 2005
-
-* Fix compiler warning
-
-* Fix FEC PHY addresses for TQM85xx boards
-
-* Fix uninitialized variable problem in hush shell
-  Patch by Lars Rostock, 26 Sep 2005
-
-* Undo change of f6e20fc6ca... to include/configs/trab.h
-  (Must have been an accident?)
-
-* Add support for AT91RM9200 OHCI Controller.
-  Patch by Eric Benard, 07 Apr 2005
-
-* Update ARM mach-types.h
-  Patch by Eric Benard, 07 Apr 2005
-
-* Add support for MP2USB board.
-  Patch by Eric Benard, 07 Apr 2005
-
-* Add board support for armadillo HT1070
-  Patch by Rowel Atienza, 06 Apr 2005
-
-* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
-  Patch by Vitaly Bordug, 30 Mar 2005
-
-* Add iopset command on mpc8xx
-  Patch by Daniel Eisenhut, 25 Mar 2005
-
-* Add support for MII in eepro100 driver.
-  Patch by Gleb Natapov, 21 Mar 2005
-
-* Fixes to the Lubbock (PXA 25x) support:
-  - Resolve the FIXME with respect to saving the u-boot environment.
-  - Make the default load address land in real memory.
-  - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
-  Patch by David Brownell, 10 Mar 2005
-
-* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
-  Patch by Marc Leeman, 04 Mar 2005
-
-* OMAP242x H4 board update
-  - fix for ES2 differences.
-  - switch to using the cfi_flash driver.
-  - fix SRAM build address.
-  - fix for GP device operation.
-  - unlock SRAM for GP devices.
-  - display more device information.
-  - fix potential deadlock in omap24xx_i2c driver.
-  - fix DLL load values to match dpllout*1 operation.
-  - fix 2nd chip select init for combo DDR device.
-  - add support for CFI Intel 28F256L18 on H4 board.
-  Patch by Richard Woodruff, 03 Mar 2005
-
-* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
-  Patch by Steven Scholz, 02 Mar 2005
-
-* Fix typo in eth.c
-  Patch by Ara Avanesyan, 24 Feb 2005
-
-* Remove unneeded #include <malloc.h>
-  Patch by Ladislav Michl, 22 Feb 2005
-
-* Add cramfs support for m68k
-  Patch by Zachary Landau, 21 Feb 2005
-
-* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
-  Patch by Jeff Angielski, 21 Feb 2005
-
-* Fix au1x00_serial baud rate calculation:
-  remove hardcoded cpu clock divisor and use register instead;
-  round up instead of truncate
-  Patch by Andrew Dyer, 15 Feb 2005
-
-* Add Xilinx Spartan3 family FPGA support
-  Patch by Kurt Stremerch, 14 Feb 2005
-
-* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
-  Patch by Zachary Landau, 11 Feb 2005
-
-* Fix VOH405 Support
-  Patch by Matthias Fuchs, 25 Sep 2005
-
-* Added support for PCI bridge on MPC8272ADS
-  Patch by Vitaly Bordug, Feb 09 2005
-
-* Update multicore CM9XX support for Integrator AP to allow booting from flash
-  Patch by Jean-Paul Saman, 8 Feb 2005
-
-* Fix strswab() to reliably find end of string
-  Patch by Andrew Dyer, 08 Feb 2005
-
-* Fix typos in include/ppc440.h
-  Patch by Andrew E Mileski, 04 Feb 2005
-
-* Add Vibren (was Accelent) PXA255 IDP Support
-  Patch by Cliff Brake, 04 Feb 2005
-
-* Fix tools/bmp_logo.c using incorrect offset to pixel data
-  Patch by Andrew Dyer, 31 Jan 2005
-
-* Add ARM946E cpu and core module targets; remap memory to 0x00000000
-  Patch by Peter Pearse, 2 Feb 2005
-
-* Fix error handling in tools/env/fw_env.c
-  Patch by Ara Avanesyan, 01 Feb 2005
-
-* Fix MGT5100 PSC baudrate calculation
-  Patch by Sebastian Schau, 27 Jan 2005
-
-* OMAP242x fix for GP device booting
-  - Add SRAM unlock for GP devices.
-  - Change DDR DLL unlock value to allow DPLLout*1 operation.
-  Patches by Richard Woodruff, 21 Jan 2005:
-
-* Add support for AMD's Pb1x00 eval board;
-  add MII routines to the au1x00 ethernet driver;
-  add USB ohci driver (work in progress)
-  Patch by Thomas Sailer, 20 Jan 2005
-
-* Update omap5912osk board
-  Use drivers/cfi_flash.c instead of private flash driver;
-  Remove hardcoded personalized settings from omap5912osk.h;
-  Fix spacing with (RO) marks in 'flinfo' output.
-  Patch by Michael Bendzick, 14 Jan 2005
-
-* Fix warnings for PCI code on ixp
-  Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
-
-* virtex2 fix for bogus download error messages
-  The virtex2 FPGA download code watches for init going active during
-  a download of config data as an error condition. init also goes
-  active after a configuration is finished in concert with the done
-  signal. So far, the code does not check for done active until all
-  of the configuration data is sent. If configuration data has a few
-  extra pad bytes at the end, this would cause an error message even
-  though the download had suceeded.
-  NOTE: virtex2 slave serial and spartan2 versions may still have the
-  same problem.
-  Patch by Andrew Dyer, 12 Jan 2005
-
-* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
-  Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
-  message when probing for nonexistent flash in little endian mode.
-  As a side effect more efficient and smaller code is generated,
-  which is always a Good Thing (TM).
-  Patch by Ladislav Michl, 24 Sep 2005
-
-* Update for TFTP using a fixed UDP port
-  Use the approved environment variable names. Added "tftpdstp" to
-  allow ports other than 69 per Tolunay Orkun's recommendation.
-  Patch by Jerry Van Baren, 12 Jan 2005
-
-* Allow to force TFTP to use a fixed UDP port
-  (Add a configuration option CONFIG_TFTP_PORT and optional env
-  variable tftpport)
-  Patch by Jerry Van Baren, 10 Jan 2005
-
-* Fix ethernet timeouts on dbau1550 and other au1x00 systems
-  Patch by Leif Lindholm, 29 Dec 2004
-
-* Cleanup: fix broken builds
-
-* Fix PHY address argument passing with mii info command
-  Patch by Andrew Dyer, 28 Dec 2004
-
-* Cleanup (PPC4xx is AMCC now)
-
-* esd CPCI2DP board added
-  Patch by Matthias Fuchs, 22 Sep 2005
-
-* esd PMC405 board updated
-  Patch by Matthias Fuchs, 22 Sep 2005
-
-* Add SM501 support to HH405 board.
-  Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
-  Add support for eeprom write-enable (CFG_EEPROM_WREN).
-  Patch by Stefan Roese, 22 Sep 2005
-
-* Fix autonegotiation in tsec ethernet driver
-  Patch by Stefan Roese, 21 Sep 2005
-
-* Fix bug in auto_update (trab board)
-  Patch by Martin Krause, 16 Sep 2005
-
-* Fix computation of framebuffer palette for 8bpp LCD bitmaps
-  Patch by Francesco Mandracci, 16 Sep 2005
-
-* Update configuration for INKA4x0 board
-
-* Update configuration for PM854 board
-  Based on patch by R. Loeffl, 20 Jul 2005
-
-* Add PCI support to TQM8540 and TQM8560 boards
-  Patch by Stefan Roese, 15 Sep 2005
-
-* Update AMCC Yosemite to get a consistent setup for all AMCC eval
-  boards (baudrate, environment...). Flash driver fixed.
-  Patch by Stefan Roese, 15 Sep 2005
-
-* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
-  ethernet port on ebony.
-  Patch by Stefan Roese, 7 Sep 2005
-
-* Added support for mtddevnum and mtddevname variables (mtdparts command)
-
-* Change default console baud rate for stxxtc board
-
-* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
-  Patch by Stefan Roese, 31 Aug 2005
-
-* Fix default command set (don't include CFG_CMD_DISPLAY command)
-  Patch by Pantelis Antoniou, 02 Sep 2005
-
-* Cleanup
-
-* Enable SM712 driver support for HMI1001 board.
-
-* Fix problems with ld version 2.16 (dot outside sections problem)
-  Pointed out by Gerhard Jaeger, 31 Aug 2005;
-  cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
-
-* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
-
-* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
-
-* Add keyboard and dot matrix display support for HMI1001 board.
-
-* Prepare U-Boot for gcc-4.x
-
-* Fixed Bamboo port to enable running without DDR-DIMM
-  (Bamboo has also 64MB onboard DDR)
-  Patch by Stefan Roese, 24 Aug 2005
-
-* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
-  now handling all 4xx cpu's
-  Patch by Stefan Roese, 16 Aug 2005
-
-* Fix make dependencies for at91rm9200 and ks8695 cpus
-  Patch by Steven Scholz, 23 Aug 2005
-
-* Add JFFS2 support for TQM5200 board
-
-* Add esd cpci5200 and pf5200 boards
-  Patch by Reinhard Arlt, 22 Aug 2005
-
-* Fix sysclock for TQM8540 and TQM8560 boards
-  Patch by Martin Krause, 25 Jul 2005
-
-* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
-  Patch by Martin Krause, 08 Jun 2005
-
-* Add new board specific commands for TQM5200/STK52XX
-  - Sound commands (beep, wav, sound)
-  - Test commands (led, can, backlight, rs232)
-  Patch by Martin Krause, 02 May 2005
-
-* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
-  because of a bug in the AT91RM9200 CPU PLL
-  Patch by Martin Krause, 22 Apr 2005
-
-* Add automatic HW detection for another CMC_PU2 variant
-  Patch by Martin Krause, 20 Apr 2005
-
-* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
-  Patch by Martin Krause, 19 Apr 2005
-
-* Fix initialization problem on TQM5200 without SM501
-  Patch by Martin Krause, 08 Apr 2005
-
-* Add RTC support for STK52XX.200
-  Patch by Martin Krause, 07 Apr 2005
-
-* Add support for IFM o2dnt board
-
-* Enable PCI on hmi1001 board
-
-* Fix return values of the jffs2 commands ls/fsload/fsinfo,
-  so we can use them to, e.g., check the existence of a file with
-  "if ls foo; then this; else that; fi" in the hush shell
-  Patch by Andreas Engel, 16 August 2005
-
-* Coding style cleanup
-
-* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
-  Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
-
-* Check return value of malloc in 440gx_enet.c
-  Patch by Travis B. Sawyer, 18 Jul 2005
-
-* Add Sandburst Metrobox and Sandburst Karef board support packages.
-  Second serial port on 440GX now defined as a system device.
-  Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
-  Patch by Travis B. Sawyer, 12 Jul 2005
-
-======================================================================
-Changes for U-Boot 1.1.3:
-======================================================================
-
-* Minor code cleanup
-
-* Add forgotten new fils from latest VoiceBlue update
-
-* Make bootretry feature work with hush shell.
-  Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
-  Patch by Andreas Engel, 19 Jul 2005
-
-* Update Hymod Board Database PHP code in "tools" directory
-  Patch by Murray Jensen, 01 Jul 2005
-
-* Make "tr" command use POSIX compliant; export HOSTOS make variable
-  Patch by Murray Jensen, 30 Jun 2005
-
-* Fix Murray Jensen's mail address.
-  Patch by Murray Jensen, 30 Jun 2005
-
-* Preserve PHY_BMCR during a soft reset.
-  Patch by Carl Riechers, 24 Jun 2005
-
-* VoiceBlue update: eeprom tool can also store firmware version now.
-  eeprom.bin is runable by jumping at load address.
-  Patch by Ladislav Michl, 23 May 2005
-
-* Move the AT91RM9200DK to the ARM Systems list.
-  Patch by Anders Larsen, 26 Apr 2005
-
-* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
-  Patch by Anders Larsen, 26 Apr 2005
-
-* measure_gclk() is needed when DEBUG is enabled
-  Patch by Bryan O'Donoghue, 25 Apr 2005
-
-* Add UPD-Checksum code, fix problem in net.c (return instead of break)
-  Patch by Reinhard Arlt, 12 Aug 2005
-
-* esd PCI405 board updated
-  Patch by Matthias Fuchs, 28 Jul 2005
-
-* esd WUH405 and DU405 board updated
-  Patch by Matthias Fuchs, 27 Jul 2005
-
-* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
-  Patch by Matthias Fuchs, 4 May 2005
-
-* Update AMCC Yosemite to get a consistent setup for all AMCC eval
-  boards (baudrate, environment...). Flash driver fixed.
-  Patch by Stefan Roese, 11 Aug 2005
-
-* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
-  Patch by Stefan Roese, 11 Aug 2005
-
-* Add NAND FLASH support for AMCC Bamboo 440EP eval board
-  Patch by Stefan Roese, 11 Aug 2005
-
-* Add configuration for IFM AEV FIFO board.
-  Minor coding style cleanup.
-
-* Add configuration for IFM SPI eval board
-
-* Fix CompactFlash problem on HMI1001 board
-
-* Make new "mtdparts" code build with older compilers
-  Patch by Andrea Scian, 09 Aug 2005
-
-* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
-  CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
-  with the 405 defines and the linux kernel defines.
-  Patch by Stefan Roese, 08 Aug 2005
-
-* Fix compiler warnings with older GCC versions
-
-* Add common (with Linux) MTD partition scheme and "mtdparts" command
-
-  Old, obsolete and duplicated code was cleaned up and replace by the
-  new partitioning method. There are two possible approaches now:
-
-  The first one is to define a single, static partition:
-
-  #undef CONFIG_JFFS2_CMDLINE
-  #define CONFIG_JFFS2_DEV		 "nor0"
-  #define CONFIG_JFFS2_PART_SIZE	 0xFFFFFFFF	/* use whole device */
-  #define CONFIG_JFFS2_PART_SIZE	 0x00100000	/* use 1MB */
-  #define CONFIG_JFFS2_PART_OFFSET	 0x00000000
-
-  The second method uses the mtdparts command line option and dynamic
-  partitioning:
-
-  /* mtdparts command line support */
-  #define CONFIG_JFFS2_CMDLINE
-  #define MTDIDS_DEFAULT	 "nor1=zuma-1,nor2=zuma-2"
-  #define MTDPARTS_DEFAULT	 "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
-
-  Command line of course produces bigger images, and may be inappropriate
-  for some targets, so by default it's off.
-
-* Fix build problems for PM856 Board
-
-* Fix sign extension bug in 'fpga loadb' command;
-  make 'fpga loadb' always print the file header info
-  Patch by Andrew Dyer, 11 Jan 2005
-
-* Fix errors that occur when accessing SystemACE CF
-  Patch by Jeff Angielski, 09 Jan 2005
-
-* Document switching between U-Boot and PlanetCore on RPXlite
-  by Sam Song, 24 Dec 2004
-
-* Fix PowerQUICC II mask detection.
-  Patch by Eugene Surovegin, 20 Dec 2004
-
-* Add support for Altera NIOS DK1C20 board
-  Patch by Shlomo Kut, 13 Dec 2004
-
-* Add support for ep8248 board
-  Patch by Yuli Barcohen, 12 Dec 2004
-
-  Minor code cleanup.
-
-* Fix baudrate setting for KGDB on MPC8260
-  Patch by HoJin, 11 Dec 2004
-
-* Fix 'mii help' text formatting
-  Patch by Cory Tusar, 10 Dec 2004
-
-* Fix return code of NFS command
-  Patch by Hiroshi Ito, 11 Dec 2004
-
-* Fix typo
-
-* Fix compiler warnings in cpu/ppc4xx/usbdev.c
-  Patch by Steven Blakeslee, 04 Aug 2005
-
-* Add support for AMCC Bamboo PPC440EP eval board
-  Patch by Stefan Roese, 04 Aug 2005
-
-* Patch by Jon Loeliger
-  Fix style issues primarily in 85xx and 83xx boards.
-    - C++ comments
-    - Trailing white space
-    - Indentation not by TAB
-    - Excessive amount of empty lines
-    - Trailing empty lines
-
-* Patch by Ron Alder, 11 Jul 2005
-    Add Xianghua Xiao and Lunsheng Wang's support for the
-    GDA MPC8540 EVAL board.
-
-* Patch by Eran Liberty
-  Add support for the Freescale MPC8349ADS board.
-
-* Patch by Jon Loeliger, 25 Jul 2005
-  Move the TSEC driver out of cpu/mpc85xx as it will be shared
-  by the upcoming mpc83xx family as well.
-
-* Patch by Jon Loeliger, 05 May 2005
-  Implemented support for MPC8548CDS board.
-  Added DDR II support based on SPD values for MPC85xx boards.
-  This roll-up patch also includes bugfies for the previously
-  published patches:
-    DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
-
-* Patch by Jon Loeliger, 10 Feb 2005
-  Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
-
-* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
-  For MPC85xxCDS:
-    Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
-    for faster flash parts.
-    Add documentation for BR/OR for FLASH.
-
-* Patch by Jon Loeliger 08 Feb 2005
-  Determine L2 Cache size dynamically on 85XX boards.
-
-* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
-  - Convert the CPM2 based functionality to use new CONFIG_CPM2
-    option rather than a myriad of CONFIG_MPC8560-like variants.
-    Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
-    Eliminates the CONFIG_MPC8560 option entirely.  Distributes the
-    new CONFIG_CPM2 option to each 8260 board.
-
-* Add support for MicroSys PM856 board
-  Patch by Josef Wagner, 03 Aug 2005
-
-* Minor fixes to PM854 board
-  Patch by Josef Wagner, 03 Aug 2005
-
-* Adjust configuration of XENIAX board
-  (chip select and GPIO required for USB operation)
-
-* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
-  routed to the Watchdog handler
-  Patch by Eugene Surovegin, 18 Jun 2005
-
-* (re)enabled scsi commands do_scsi() and do_scsiboot()
-  Patch by Denis Peter, 06 Dec 2004
-
-* Fix endianess problem in TFTP / NFS default filenames
-  Patch by Hiroshi Ito, 06 Dec 2004
-
-* Ignore broadcast status bit in received frames in 8260 FCC ethernet
-  loopback test code
-  Patch by Murray Jensen, 18 Jul 2005
-
-* Fix typo in mkconfig script (used == instead of =)
-  Patch by Murray Jensen, 18 Jul 2005
-
-* Cleanup build problems on 64 bit build hosts
-
-* Update MAINTAINERS file
-
-* Patch by Stefan Roese, 01 Aug 2005:
-  - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
-    (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
-    for details.
-  - Sycamore (PPC405GPr) eval board added (Walnut port is extended
-    to run on both 405GP and 405GPr eval boards).
-
-* Patch by Steven Blakeslee, 27 Jul 2005:
-  - Add support for AMCC PPC440EP/GR.
-  - Add support for AMCC Yosemite PPC440EP eval board.
-  - Add support for AMCC Yellowstone PPC440GR eval board.
-
-* Minor fixes for PPChameleon Board:
-  - fix alignment of NAND size
-  - make code do what the comment says
-
-* Implement h/w sector protection status synchronization at boot.
-  The code is provided for, and was tested on, the Yukon/Alaska
-  and PM520 boards only.
-
-  A bug in flash_real_protect() for the Yukon board was fixed by
-  adding a function that tells if two banks are on one flash chip.
-
-* Fix sysmon POST problem: check I2C error codes
-  This fixes a problem of displaying bogus voltages when the voltages
-  are so low that the I2C devices start failing while the rest of the
-  system keeps running.
-
-* Patch by Cedric Vincent, 6 Jul 2005:
-  Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
-
-* Patch by Jon Loeliger, 20 Jul 2005:
-  Add missing PCI IO port definitions.
-
-* Add CompactFlash support for HMI1001 board.
-
-* Adjust printed board ID for LWMON board.
-
-* Fix low-level OHCI transfers for ARM920t and MPC5xxx
-
-* Add new argument format for flash commands to allow for usage like
-  "erase $(addr) +$(filesize)", i. e. a size argument can be used and
-  U-Boot will automaticially find the end of the corresponding sector.
-
-* Patch by Stefan Roese, 5 Jul 2005:
-  Update uc100 board PHY setup
-
-* Patch by Stefan Roese, 1 Jul 2005:
-  Fix PHY address for CATcenter board (now correct!)
-
-* Patch by Stefan Roese, 30 Jun 2005:
-  Fix PHY addresses for PPChameleon and CATcenter boards
-  Change MAINTAINER for most esd boards
-
-* Patch by Detlev Zundel, 30 Jun 2005:
-  Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
-
-* Fix baudrate calculation problem on MPC5200 systems
-
-* Add EEPROM and RTC support for HMI1001 board
-
-* Patch by Detlev Zundel, 20 Jun 2005:
-  Fix initialization of low active GPIO pins on inka4x0 board
-
-* Enable redundant environment, disable HW flash protection of
-  HMI1001 board
-
-* Patch by Travis Sawyer, 10 Jun 2005:
-  Initialize allocated dev and private hw structures
-  after their respective allocation in 440gx_enet.c
-
-* Patch by Steven Scholz, 10 Jun 2005:
-  Fix byteorder problems with second argument of "bootm" with
-  standalone images;
-
-* Add support for HMI1001 board
-
-* Disable "date" and "sntp" commands on TQM866M
-
-* Fix watchdog reset problems on LWMON board
-
-* Patch by Juergen Selent, 17 May 2005:
-  Add support for Funkwerk VoVPN gateway module.
-
-* Cleanup debug code for MPC8220 FEC driver
-
-* Extend burst mode RAM test program to take a loop count
-  (0 = infinite)
-
-* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
-  those boards that use it.
-
-* Patches by Greg Ungerer, 19 May 2005:
-  - add support for the KS8695P (ARM 922 based) CPU
-  - add support for the OpenGear CM4008, CM4116 and CM4148 boards
-
-* Patch by Steven Scholz, 19 May 2005:
-  Add support for CONFIG_SERIAL_TAG on ARM boards
-
-* Add PCI support for Sorcery board.
-  Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
-
-* Fix compile problems caused by new burst mode SDRAM test;
-  make port pins to trigger logic analyzer configurable
-
-* Fix timer handling on MPC85xx systems
-
-* Fix debug code in omap5912osk flash driver
-
-* Add support for MPC8247 based "IDS8247" board.
-
-* Add support for 2 x TSEC interfaces on the TQM8540 board.
-
-* On LWMON we must use the watchdog to reset the board as the CPU
-  genereated HRESET pulse is too short to reset the external
-  circuitry.
-
-* Add test tool to exercise SDRAM accesses in burst mode
-  (as standalone program, MPC8xx/PowerPC only)
-
-* Increase CFG_MONITOR_LEN for Rattler board to match actual code
-  size.
-
-* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
-  March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
-  added to support LZO and LZARI compression modes (undefined by
-  default).
-
-* Fix problem with symbolic links in JFFS2 code.
-
-* Use linker ASSERT statement to prevent undetected overlapping of
-  sections on PPChameleon board; other boards might use this, too.
-
-* Patch by Stefan Roese, 03 May 2005:
-  Update for P3G4
-  Fix problems in cmd_universe.c
-
-* Patch by Matthias Fuchs, 03 May 2005:
-  Added missing variable declaration in cmd_nand.c
-  Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
-
-* Fix INKA4x0: use CS1 as gpio_wkup_6 output
-
-* Fix bug in the SDRAM initialization code for canmb, IceCube and
-  PM520 boards.
-  Fix PHY address for canmb board.
-
-* Cleanup serial console baudrate calculation on AT91RM9200;
-  get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
-
-* Patch by Matthias Fuchs, 18 Apr 2005:
-  Make PCI target address spaces on PMC405 and CPCI405 boards
-  configurable via environment variables
-
-* Auto-size RAM on canmb board.
-
-* Add support for canmb board
-
-* Patch by Stefan Roese, 13 Apr 2005:
-  Update for esd apc405
-
-* Fixes for TQM8560 board:
-  - fix clock rates
-  - remove debug messages
-  - fix flash sector protection
-
-* Patch by Steven Scholz, 07 Apr 2005:
-  Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
-
-* Patches by Steven Scholz, 07 Apr 2005:
-  Fix compiler warning in altera.c
-  Fix warning in cpu/arm920t/at91rm9200/i2c.c
-
-* Patch by Ladislav Michl, 06 Apr 2005:
-  Fix voiceblue configuration.
-
-* Patch by Stefan Roese, 06 Apr 2005:
-  Updates for OCOTEA board:
-  - Changed U-Boot size from 512kByte to 256kByte
-  - Fixed flash driver to support boot from soldered user flash
-  - Added README for switch from PIBS firmware to U-Boot
-
-* Patch by Travis Sawyer, 05 Apr 2005:
-  - Change timer frequency for ppc 440 from 10 ms to 1 ms.
-    Problem found by Andrew Wozniak.
-
-* Patch by Steven Scholz, 06 Apr 2005:
-  - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
-  - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
-
-* Patches by Robert Whaley, 29 Nov 2004:
-  - update the pxa-regs.h file for PXA27x chips
-  - add PXA27x based ADSVIX board
-  - add support for MMC on PXA27x processors
-
-* Patch by Andrew E. Mileski, 28 Nov 2004:
-  Fix PPC4xx SPD SDRAM detection bug
-
-* Patch by Hiroshi Ito, 26 Nov 2004:
-  Fix logic of "test -z" and "test -n" commands
-
-* Patch by Ladislav Michl, 05 Apr 2005:
-  Add support for VoiceBlue board.
-
-* Patch by Ladislav Michl, 05 Apr 2005:
-  Fix netboot_common() prototypes.
-
-* Patch by Steven Scholz, 05 Apr 2005:
-  Use i.MX watchdog timer for reset_cpu()
-
-* Patch by Steven Scholz, 05 Apr 2005:
-  Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
-  subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
-  (now in interupts.c)
-
-* Add support for MPC8220 based "sorcery" board.
-
-* Add support for TQM8560 board.
-
-* Add FEC support for TQM8540 board.
-  Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
-
-* Patch by Martin Krause, 04 Apr 2005:
-  Update default configuration for CMC_PU2 board.
-
-* Patch by Steven Scholz, 04 Apr 2005:
-  - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
-  - introduce two new configuration options instead:
-    CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
-
-* Patch by Steven Scholz, 04 Apr 2005:
-  Make sure that MDIO clock does not exceed 2.5 MHz on AT91
-
-* Fix timer code for ARM systems: make sure that udelay() does not
-  reset timers so it's save to use udelay() in timeout code.
-
-* Patch by Mathias Küster, 23 Nov 2004:
-  add udelay support for the mcf5282 cpu
-
-* Patch by Tolunay Orkun, 16 November 2004:
-  fix incorrect onboard Xilinx CPLD base address
-
-* Patch by Jerry Van Baren, 08 Nov 2004:
-  - Add low-boot option for MPC8260ADS board (if lowboot is selected,
-    the jumper for the HRCW source should select flash. If lowboot is
-    not selected, the jumper for the HRCW source should select the
-    BCSR.
-  - change default load base address to 0x00400000
-
-* Patch by Yuli Barcohen, 08 Nov 2004:
-  Add support for Analogue & Micro Rattler boards.
-  Tested on Rattler8248.
-
-* Patch by Andre Renaud, 08 Nov 2004:
-  Fix watchdog support in common/lcd.c
-
-* Patch by Marc Leeman, 05 Nov 2003:
-  Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
-  bug only affects the XPC8245 processors
-
-* Patches by Josef Wagner, 29 Oct 2004:
-  - Add support for MicroSys CPU87 board
-  - Add support for MicroSys PM854 board
-
-* Patch by Jian Zhang, 02 Nov 2004:
-  Add 16-bit NAND support
-
-* Patch by Scott McNutt, 01 Nov 2004:
-  Add missing NIOS/NIOS2 support for "iminfo" command
-
-* Patch by Detlev Zundel, 29 Oct 2004:
-  Add missing NIOS/NIOS2 support for "mkimage" tool.
-
-* Patch by David Adair, 27 Oct 2004:
-  Add missing 440GX SDRAM Controller reset
-
-* Patch by Steven Scholz, 25 Oct 2004:
-  Declare reset_cpu() in include/common.h instead locally
-
-* Patch by Yusdi Santoso, 22 Oct 2004:
-  - Add support for HIDDEN_DRAGON board
-  - fix endianess problem in driver/rtl1839.c
-
-* Patch by Allen Curtis, 21 Oct 2004:
-  support multiple serial ports
-
-* Patch by Richard Klingler, 03 Apr 2005:
-  Add call to eth_halt() in net/net.c when called functions fail
-  after eth_init() has been called.
-
-* Patch by Sam Song, 3 April 2005:
-  - Update README.Netconsole
-  - Update README
-
-* Prepare for SoC rework of ARM code:
-  - rename CONFIG_BOOTBINFUNC into  CONFIG_INIT_CRITICAL
-  - rename memsetup into lowlevel_init (function name and source files)
-  Patch by Steven Scholz, 03 Apr 2005:
-  - create SoC specific directories include/asm-arm/arch-imx and
-    include/asm-arm/arch-s3c24x0
-
-* Fix problems with SNTP support;
-  enable SNTP support in some boards.
-
-* Patches by Martin Krause, 01 Apr 2005:
-  - Fix flash erase timeout on CMC_PU2
-  - Add automatic HW detection for CMC_PU2 and CMC_BASIC
-
-* Patch by Steven Scholz, 13 March 2005:
-  fix cache enabling for AT91RM9200
-
-* Patch by Masami Komiya, 30 Mar 2005:
-  add SNTP support and expand time server and time offset fields of
-  DHCP support. See doc/README.SNTP
-
-* Patch by Steven Scholz, 13 Dec 2004:
-  Fix bug in at91rm920 ethernet driver
-
-* Patch by Steven Scholz, 13 Dec 2004:
-  Remove duplicated code by merging memsetup.S files for
-  at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
-
-* Patch by Detlev Zundel, 31 Mar 2005:
-  Cleanup duplicate definition of overwrite_console()
-
-* Update TQM5200 configuration;
-  prepare for Rev. 200 starter kit boards
-
-* Patch by Scott McNutt, 21 Oct 2004:
-  Add support for Nios-II EPCS Controller core.
-
-* Patch by Scott McNutt, 20 Oct 2004:
-  Nios-II cleanups:
-  - Add sysid command (Nios-II only).
-  - Locate default exception trampoline at proper offset.
-  - Implement I/O routines (readb, writeb, etc)
-  - Implement do_bootm_linux
-
-* Patches by Martin Krause, 22 Mar 2005:
-  - use TQM5200_auto as MAKEALL target for TQM5200 systems
-  - add support for SM501 graphics controller
-  - add support for graphic console on TQM5200
-  - add support for TQM5200 Rev 200
-  - cleanup, fix typo in include/configs/TQM5200.h
-
-* Patch by Manfred Baral, 17 Mar 2005:
-  Fix typo
-
-* Fix RTC configuration for PPChameleon board
-
-* Cleanup, fix typo in include/configs/TQM5200.h
-
-* Patch by Stefan Roese, 16 Mar 2005:
-  Update for esd auto_update and hh405 board
-
-* Adapt for U-Boot image size (new features enabled) on TQM5200
-
-* Update code for TQM8540 board (and 85xx in general):
-  - Change the name of the Ethernet driver: MOTO ENET -> ENET
-  - Reformat boot messages
-  - Enable redundant environment
-  - Replace the -O2 optimization flag with -mno-string
-
-* Patch by David Brownell, 10 Mar 2005:
-  Restore copyright statements in OHCI drivers.
-
-* Add support for TQM8540 board
-
-* Patch by Detlev Zundel, 14 Mar 2005:
-  NC650: changed NAND flash addressing to using UPMB
-
-* Patch by Stefan Roese, 14 Mar 2005:
-  Update for esd voh405 fpga image
-
-* INKA4x0: Allow initialization of LCD backlight dimming from
-  "brightness" environment variable.
-
-* Add port initialization for digital I/O on INKA4x0
-
-* Patch by Stefan Roese, 01 Mar 2005:
-  Update for esd boards dp405 and hub405
-
-* Fix get_partition_info() parameter error in all other calls
-  (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
-
-* Enable USB and IDE support for INKA4x0 board
-
-* Patch by Andrew Dyer, 28 Feb 2005:
-  fix ext2load passing an incorrect pointer to get_partition_info()
-  resulting in load failure for devices other than 0
-
-* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
-
-* Cleanup USB and partition defines
-
-* Add support for ext2 filesystems and image timestamps to TQM5200 board
-
-* Add reset code for Coral-P on INKA4x0 board
-
-* Patch by Martin Krause, 28 Jun 2004:
-  Update for TRAB board.
-
-* Fix some missing "volatile"s in MPC5xxx FEC driver
-
-* Fix cirrus voltage detection (for CPC45)
-
-* Fix byteorder problem in usbboot and scsiboot commands.
-
-* Patch by Cajus Hahn, 04 Feb 2005:
-  - don't insist on leading '/' for filename in ext2load
-  - set default partition to useful value (1) in ext2load
-
-* Patch by Andrew Dyer, 08 Jan 2005:
-  fix wrong return codes in ext2 code
-
-* Removed '--no-warn-mismatch' option from Makefile. This option
-  makes 'ld' to overlook binary objects compatibility.
-
-* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
-  --end-group) outside of the group. This will make 'ld' to do
-  _multiple_ search in the library group when resolving symbol
-  references and do only a _single_ seach in libgcc.a after the group
-  search.
-
-* Fix stability problems on CPC45 board again.
-
-* Make image detection for diskboot / usbboot / scsiboot more robust
-  (also check header checksum)
-
-* Update CPC45 board configuration.
-
-* Add USB and PCI support for INKA4x0 board
-
-* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
-
-* Code cleanup
-
-* Patch by Robin Getz, 13 Oct 2004:
-  Add standalone application to change SMC91C111 MAC addresses,
-  see examples/README.smc91111_eeprom
-
-* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
-  Fix Flash support for ARM Integrator CP.
-
-* Patch by Richard Woodruff, 10 Jan 2005:
-  Update support for OMAP2420 (ARM11) and H4 board:
-  o clean up and add new types to H4 memory probe code.
-  o fix to work with internal boot.
-  o added PRCM config III operation.
-  o fix marginal flash timings.
-  o add revison ATAG usage.
-  o enable voltage scaling at power chip.
-  o fix compile error for i2c.
-
-* Fix network problem (error when receiving multiple ARP packets)
-
-* Patch by Daniel Poirot, 12 Oct 2004:
-  Add support for Wind River sbc405 board
-
-* Patch by Rainer Brestan, 12 Oct 2004:
-  Make examples/Makefile more robust
-
-* Patch by Sam Song, 11 October 2004:
-  - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
-  - Adjust CPU:BUS frequency ratio 1:1 when core frequency
-    less than 50MHz
-
-* Patch by Sam Song, 10 Oct 2004:
-  Fix a parameter error in run_command() in main.c
-
-* Patch by Richard Woodruff, 01 Oct 2004:
-  add support for the TI OMAP2420 processor and its H4 reference
-  board
-
-* Patch by Christian Pellegrin, 24 Sep 2004:
-  Added support for NE2000 compatible (DP8390, DP83902) NICs.
-
-* Patch by Leif Lindholm, 23 Sep 2004:
-  add support for the AMD db1550 board
-
-* Patch by Travis Sawyer, 15 Sep 2004:
-  Add CONFIG_SERIAL_MULTI support for ppc4xx,
-  update README.serial_multi
-
-* Patches by David Snowdon, 07 Sep 2004:
-  - add u-boot.hex target in the top level Makefile
-  - add support for the UNSW/NICTA PLEB 2 board (pleb2)
-  - use -mtune=xscale and -march=armv5 options for PXA
-
-* Patch by Florian Schlote, 08 Sep 2004:
-  Add support for SenTec-COBRA5272-board (ColdFire).
-
-* Patch by Gleb Natapov, 07 Sep 2004:
-  mpc824x: set PCI latency timer to a sane value
-  (is 0 after reset).
-
-* Patch by Kurt Stremerch, 03 Sep 2004:
-  Add bitstream configuration option for fpga command (Xilinx only).
-
-* Patch by Kurt Stremerch, 03 Sep 2004:
-  Add Xilinx Spartan2E family FPGA support
-
-* Patch by Jeff Angielski, 02 Sep 2004:
-  Add Added support for H2 revision of the EP8260 board.
-  Fixed formatting for some of the EP8260 related source files.
-
-* Patch by Jon Loeliger, 02 Sep 2004:
-  Reset monitor size back to 256 so environment can be written
-  to flash on MPC85xx ADS and CDS releases.
-
-* Patch by Paolo Broggini, 02 Sep 2004:
-  Make BSS clearing on ARM systems more robust
-
-* Patch by Yue Hu and Joe, 01 Sep 2004:
-  - add PCI support for ixp425;
-  - add EEPRO100 suppor tfor ixdp425 board.
-
-* Fix problem with protected sector detection in driver/cfi_flash.c
-
-======================================================================
-Changes for U-Boot 1.1.2:
-======================================================================
-
-* Code cleanup, mostly for GCC-3.3.x
-
-* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
-  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
-  additional ethernet addresses.
-
-* Cleanup drivers/i82365.c - avoid duplication of code
-
-* Fix bogus "cannot span across banks" flash error message
-
-* Code cleanup
-
-* Add support for CompactFlash for the CPC45 Board.
-
-* Fix problems with CMC_PU2 flash driver.
-
-* Cleanup:
-  - avoid trigraph warning in fs/ext2/ext2fs.c
-  - rename UC100 -> uc100
-
-* Add support for UC100 board
-
-* Patch by Stefan Roese, 16 Dez 2004:
-  - ext2fs support added
-  - Tundra universe support added
-  - ColdFire MCF5249 support added (no preloader needed!)
-  - MCF5249 board TASREG added
-  - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
-    VOM405, WUH405
-  - some esd boards updated
-  - memory commands "mdc" and "mwc" added for cyclic read/write
-    (CONFIG_MX_CYCLIC, see README for further description)
-
-* Add support for INKA4X0 board
-
-* Patch by Steven Scholz, 12 Dec 2004:
-  Fix typo in AT91 memory setup.
-
-* Patch by Martin Krause, 27 Oct 2004:
-  - add support for "STK52xx" board (including PS/2 multiplexer)
-  - add hardware detection for TQM5200
-
-* Clean up CMC PU2 flash driver
-
-* Update MAINTAINERS file
-
-* Fix bug in MPC823 LCD driver
-
-* Fix udelay() on AT91RM9200 for delays < 1 ms.
-
-* Enable long help on CMC PU2 board;
-  fix reset issue;
-  increase CPU speed from 179 to 207 MHz.
-
-* Fix smc91111 ethernet driver for Xaeniax board (need to handle
-  unaligned tail part specially).
-
-* Update for AT91RM9200DK and CMC_PU2 boards:
-  - Enable booting directly from flash
-  - fix CMC_PU2 flash driver
-
-* Fix mkimage usage message
-
-* Map SRAM on NC650 board
-
-* Work around for Ethernet problems on Xaeniax board
-
-* Patch by TsiChung Liew, 23 Sep 2004:
-  - add support for MPC8220 CPU
-  - Add support for Alaska and Yukon boards
-
-* Fix configuration for ERIC board (needs more room)
-
-* Adjust MIPS compiler options at run-time depending on tools version
-  ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
-  "-mcpu=4kc" for old tools)
-
-* Add passing of the command line and memory size information to  the
-  kernel on xaeniax board.
-
-* Enable NAND flash support for NC650 board.
-
-* Patch by Thomas Lange 07 Oct 2004:
-  Updated README for DBAu1x00 boards to match current status
-
-* Patch by Philippe Robin, 28 Sept 2004:
-  Fix Flash support for Versatile.
-
-* Patch by Roger Blofeld, 16 Sep 2004:
-  Fix timeout for DHCP command retry
-
-* Patch by Pantelis Antoniou, 14 Sep 2004:
-  Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
-
-* Patch by Pantelis Antoniou, 14 Sep 2004:
-  Kick watchdog when bz-decompressing
-
-* Fix CFG_HZ problems on AT91RM9200 systems
-  [Remember: CFG_HZ should be 1000 on ALL systems!]
-
-* Patch by Gridish Shlomi, 30 Aug 2004:
-  - Add support to revA version of PQ27 and PQ27E.
-  - Reverted MPC8260ADS baudrate back to original 115200
-
-* Patch by Hojin, 17 Sep 2004:
-  Fix typo in cfi_flash.c
-
-* Patch by Mark Jonas, 09 September 2004:
-  mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
-  error message
-
-* Patch by Mark Jonas, 31 August 2004:
-  Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
-  improves FTP performance for MPC5200 systems. Enabled for IceCube
-  by default.
-
-* Patch by Michael Bendzick, 30 Aug 2004:
-  - Improve platform.S code for omap1510inn that detects whether code
-    is running from SDRAM or not. Patch allows SDRAM to be configured
-    if code is running out of SRAM at 0x20000000.
-
-* Patch by Frederick Klatt, 30 Aug 2004:
-  Add support for the Wind River SBC8540/SBC8560 boards
-
-* Configure SX1 board to use drivers/cfi_flash.c
-
-* Patches by Michael Bendzick, 30 Aug 2004:
-  - Configure omap1510inn board to use drivers/cfi_flash.c
-  - Make drivers/cfi_flash.c protect environment and redundant
-    environment.
-
-* Patch by Steven Scholz, 23 Jun 2004:
-  - Add script (tools/img2brec.sh) to programm U-Boot into
-    (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
-
-* Patches by Scott McNutt, 24 Aug 2004:
-  - Add support for Altera Nios-II processors.
-  - Add support for Psyent PCI-5441 board.
-  - Add support for Psyent PK1C20 board.
-
-* Patches by Jon Loeliger, 24 Aug 2004:
-  - Add support for the MPC8541 and MPC8555 CDS boards
-  - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
-  - Convert MPC85xxADS to use common CFI flash driver
-  - Fix PCI window on MPC85xx; remove unneeded PCI initialization
-    from board_early_init_f()
-  - Provide SW workaround for PCI initialization on 85xx CDS
-
-* Patches by George G. Davis, 24 Aug 2004:
-  - Enable ramdisk/initrd tagged param support for omap1610h2_config
-  - Remove static network setup defaults from mx1ads_config
-  - update ARM boards to use constants from mach-types.h
-
-* Patch by Gary Jennejohn, 04 Oct 2004:
-  - fix I2C on at91rm9200
-  - add support for Ricoh RS5C372A RTC
-
-* Patch by Gary Jennejohn, 01 Oct 2004:
-  - add support for CMC PU2 board
-  - add support for I2C on at91rm9200
-
-* Patch by Gary Jennejohn, 28 Sep 2004:
-  fix baudrate handling on at91rm9200
-
-* Patch by Yuli Barcohen, 22 Aug 2004:
-  - remove ZPC.1900 board-specific flash driver;
-    switch the port to generic CFI driver;
-  - port clean-up
-
-* Patch by Hinko Kocevar, 21 Aug 2004:
-  Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
-
-* Clean up tools/bmp_logo.c to not add trailing white space
-
-* Patch by Hinko Kocevar, 21 Aug 2004:
-  - Group common framebuffer functions in common/lcd.c
-  - Group common framebuffer macros and #defines in include/lcd.h
-  - Provide calc_fbsize() for video ATAG
-
-* Patch by Sam Song, 21 August 2004:
-  - Fix a typo in README
-  - Align "(RO)" output for "flinfo" after "protect on"
-  - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
-    ratio 1:1 when core frequency less than 50MHz
-
-* Patches by Hinko Kocevar, 21 Aug 2004:
-  - fix some "use of label at end of compound statement" warnings
-  - Define type of LCD panel on lubbock board if CONFIG_LCD is used
-
-* Patch by Steven Scholz, 16 Aug 2004:
-  - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
-  - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
-  - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
-  - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
-    into cpu/arm920t/$(SOC)/
-
-* Patches by Sean Chang, 09 Aug 2004:
-  - Added support for both 8 and 16 bit mode access to System ACE CF
-    through MPU.
-  - Fixed missing System ACE CF device during get FAT partition info
-    in fat_register_device function.
-  - Enabled System ACE CF support on ML300.
-
-* Patch by Sean Chang, 09 Aug 2004:
-  Synch defines for saveenv and do_saveenv functions so they get
-  compiled under the same statement.
-
-* Patch by Sean Chang, 09 Aug 2004:
-  - Added I2C support for ML300.
-  - Added support for ML300 to read out its environment information
-    stored on the EEPROM.
-  - Added support to use board specific parameters as part of
-    U-Boot's environment information.
-  - Updated MLD files to support configuration for new features
-    above.
-
-* Patches by Travis Sawyer, 05 Aug 2004:
-  - Remove incorrect bridge settings for eth group 6
-  - Add call to setup bridge in ppc_440x_eth_initialize
-  - Fix ppc_440x_eth_init to reset the phy only if its the
-    first time through, otherwise, just check the phy for the
-    autonegotiated speed/duplex.  This allows the use of netconsole
-  - only print the speed/duplex the first time the phy is reset.
-
-* Patch by Shlomo Kut, 29 Mar 2004:
-  Add support for MKS Instruments "Quantum" board
-
-* Fix build problem with Cogent boards;
-  avoid using <asm/byteorder.h> when using the host compiler
-
-* Patch by Ganapathi C, 04 Aug 2004:
-  Fix NFS timeout issue
-
-* Patch by Yuli Barcohen, 19 Jul 2004:
-  - Fix host tools building in Cygwin environment
-  - Fix header files search order for host tools
-
-* Patch by Tom Armistead, 19 Jul 2004:
-  Fix kgdb.S support for 74xx_75x cpu
-
-* Patch by Jon Loeliger, 15 Jul 2004:
-  Fix MPC85xx I2C driver
-
-* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
-
-* Patch by Stephen Williams, 15 July 2004
-  Set the PCI class code for JSE board as part of PCI interface setup
-
-* Patch by Michael Bendzick, 15 Jul 2004:
-  Fix problem with writes with odd sizes in drivers/cfi_flash.c when
-  CFG_FLASH_USE_BUFFER_WRITE is set
-
-* Patch by Yuli Barcohen, 13 Jul 2004:
-  Allow clock setting on MPC866/MPC885 series chips according to
-  environment variable `cpuclk'
-
-* Patch by Yuli Barcohen, 20 Apr 2004:
-  Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
-
-* Patch by Vincent Dubey, 24 Sep 2004:
-  Add support for xaeniax board
-
-* Add comment about non-GPL character of standalone applications to
-  COPYING file
-
-* Fix FEC ethernet problem on NSCU board.
-
-* Patch by Gary Jennejohn, 09 Sep 2004:
-  allow to use USART1 as console port on at91rm9200dk boards
-
-* Patch by Stefan Roese, 16 Sep 2004:
-  Update AR405 board.
-
-* Fix SysClk handling for PPChameleon and CATcenter boards
-
-* Patch by Detlev Zundel, 08 Sep 2004:
-  Update etags build target
-
-* Improve NetConsole support: add support for broadcast destination
-  address and buffered input.
-
-* Cleanup compiler warnings for GCC 3.3.x and later
-
-* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
-
-* Add support for IDS "NC650" board
-
-* Add automatic update support for LWMON board
-
-* Clear Block Lock-Bits when erasing flash on LWMON board.
-
-* Fix return code of "fatload" command
-
-* Enable MSDOS/VFAT filesystem support for LWMON board
-
-* Patch by Martin Krause, 03 Aug 2004:
-  change timing for SM501 graphics controller on TQM5200 module
-
-* Patch by Mark Jonas, 13 July 2004:
-  - Total5200 LCD now run in little endian mode. Endianess conversion
-    is done in hardware.
-  - Removed last reference to "console" environment variable.
-
-* Patches by Lars Munch, 12 Jul 2004:
-  - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
-    board specific
-  - split out the LXT971A PHY from ns_9750_eth.h
-  - split the dm9161 phy part out of at91rm9200_ether.c
-
-* Patch by Andreas Engel, 12 Jul 2004:
-  Replaced hardcoded PL011 clock frequency with config variable.
-  Fixed wrong CONFIG_CMD_DFL doc.
-
-* Patch by Thomas Viehweger, 09 Jun 2004:
-  make it possible to remove chpart when there is only one partition
-
-* Add support for console over UDP (compatible to Ingo Molnar's
-  netconsole patch under Linux)
-
-* Patch by Jon Loeliger, 16 Jul 2004:
-  - support larger DDR memories up to 2G on the PC8540/8560ADS and
-    STXGP3 boards
-  - Made MPC8540/8560ADS be 33Mhz PCI by default.
-  - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
-    and CONFIG_L2_INIT_RAM options.
-  - Refactor Local Bus initialization out of SDRAM setup.
-  - Re-implement new version of LBC11/DDR11 errata workarounds.
-  - Moved board specific PCI init parts out of CPU directory.
-  - Added TLB entry for PCI-1 IO Memory
-  - Updated README.mpc85xxads
-
-* Patch by Sascha Hauer, 28 Jun:
-  - add generic support for Motorola i.MX architecture
-  - add support for mx1ads, mx1fs2 and scb9328 boards
-
-* Patches by Marc Leeman, 23 Jul 2004:
-  - Add define for the PCI/Memory Buffer Configuration Register
-  - corrected comments in cpu/mpc824x/cpu_init.c
-
-* Add support for multiple serial interfaces
-  (for example to allow modem dial-in / dial-out)
-
-* Patch by Stefan Roese, 15 Jul 2004:
-  cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
-
-* Fix NSCU config; add ethernet wakeup code.
-
-* Add link for preloader for Motorola ColdFire to README.m68k
-
-* Patch by Michael Bendzick, 12 Jul 2004:
-  fix output formatting in drivers/cfi_flash.c
-
-* Patch by Mark Jonas, 02 Jul 2004:
-  Fix lowboot (again) on MPC5xxx
-
-* Patch by Curt Brune, 07 Jul 2004:
-  relocate exception vectors on arm720t if needed
-
-* Patch by George G. Davis, 06 Jul 2004:
-  - update mach-types.h to latest arm.linux.org.uk master list
-  - Set correct OMAP1610 bi_arch_number for build target
-
-* Patch by Curt Brune, 06 Jul 2004:
-  evb4510: add support for timer interrupt; cleanup
-
-* Patch by Dan Poirot, 06 Jul 2004:
-  Fix sbc8260 environment variables
-
-* Cleanup redundand "console" environment variable
-
-* Patch by Mark Jonas, 05 Jul 2004:
-  add support for the Total5100's and Total5200's LCD screen
-
-* Patches by Dan Eisenhut, 01 Jul 2004:
-  - README fixes.
-  - Move doc2000.h include to prevent compiler warning on some boards
-
-* Patch by Mark Jonas, 01 Jul 2004:
-  Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
-  MGT5100 and MPC5200 based Freescale platforms.
-
-* Patch by Philippe Robin, 01 Jul 2004:
-  Add initialization for Integrator and versatile board files.
-
-* Patch by Hinko Kocevar, 01 Jun 2004:
-  Fix VFD FB allocation, add LCD FB allocation on ARM
-
-* Patch by Martin Krause, 30 Jun 2004:
-  Add support for TQM5200 board
-
-* Patch by Martin Krause, 29 Jun 2004:
-  Add loopw command: infinite write loop on address range
-
-* Patches by Yasushi Shoji, 29 Jun 2004:
-  - add empty include/asm-microblaze/processor.h
-  - add to CREDITS and MAINTAINERS
-  - add gd initialization
-  - add MicroBlaze and SUZAKU board to MAKEALL script
-  - add reset support for SUZAKU
-  - add flush_cache() for MicroBlaze
-  - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
-    size flash memory on SUZAKU
-
-* Patch by Prakash Kumar, 27 Jun 2004:
-  Add support for the PXA250 based Intrinsyc Cerf board.
-
-* Patch by Yasushi Shoji, 27 Jun 2004:
-  fix comment in include/common.h
-
-* Rename SBC8560 into sbc8560 for consistency
-
-* Patch by Daniel Poirot, 24 Jun 2004:
-  Add support for Wind River's sbc8240 board
-
-* Patches by Yasushi Shoji, 26 Jun 2004:
-  - drivers/serial_xuartlite.c: fix "return 0" in void function
-  - add microblaze support to mkimage tool
-
-* Patch by Fred Klatt, 25 Jun 2004:
-  Add support for WindRiver's sbc8560 board
-
-* Patch by Nicolas Lacressonniere, 24 Jun 2004
-  Small Bugs fixes for "at91rm9200dk" board:
-  - Timing modifications for SPI DataFlash access
-  - Fix NAND flash detection bug
-
-* Patch by Nicolas Lacressonniere, 24 Jun 2004:
-  Add Support for Flash AT49BV6416 for AT91RM9200DK board
-
-* Patch by Jon Loeliger, 17 June 2004:
-  Completion of the 8540ADS/8560ADS updates:
-  Fix some PCI and Rapid I/O memory maps,
-  Initialize both TSEC 1 and 2,
-  Initialize SDRAM
-  Update MAINTAINER for 85xx boards and README.mpc85xxads
-
-* Patch by Yuli Barcohen, 16 Jun 2004:
-  Remove obsolete AdderII port which was superseded by unified
-  AdderII/Adder87x port
-
-* Patch by Ladislav Michl, 16 Jun 2004:
-  Fix gcc-3.3.3 warnings for smc91111.c
-
-* Patch by Stefan Roese, 02 Jul 2004:
-  - Fix bug in 405 ethernet driver; allocated data not cleared!
-  - Fix problem in 405 i2c driver; don't try to print without console!
-
-* Patch by Paul Ruhland, 11 Jun 2004:
-  Remove debug code from 'board/lpd7a40x/flash.c'
-
-* Patch by Andrea Marson, 11 Jun 2004:
-  Update for PPChameleon board:
-  - support for SysClk @ 25MHz
-  - support for Silicon Motion SM712 VGA controller
-  - some clean ups
-
-* Patches by Richard Woodruff, 10 Jun 2004:
-  - fix problems with examples/stubs.c for GCC >= 3.4
-  - fix problems with gd initialization
-
-* Patch by Curt Brune, 17 May 2004:
-  - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
-  - Add support for ESPD-Inc. EVB4510 Board
-
-* Patch by Marc Leeman, 11 May 2004:
-  Fix for MPC8245 - reading PPC Memory from another device with the
-  PPC as PCI target device corrupts data due to interenal hardware
-  buffering.
-
-* Fix "cls" command when used with splash screen
-
-* Increase NFS download timeout (now 1 min - 10 sec is to short for a
-  slow download of a big image)
-
-* Add "cls" function to MPC823 LCD driver so we can reinitialize the
-  display even after showing a bitmap
-
-* Patch by Josef Wagner, 04 Jun 2004:
-  - DDR Ram support for PM520 (MPC5200)
-  - support for different flash types (PM520)
-  - USB / IDE / CF-Card / DiskOnChip support for PM520
-  - 8 bit boot rom support for PM520/CE520
-  - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
-  - I2C and RTC support for CPC45
-  - support of new flash type (28F160C3T) for CPC45
-
-* Fix flash parameters passed to Linux for PPChameleon board
-
-* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
-
-* Patch by Paul Ruhland, 10 Jun 2004:
-  fix support for Logic SDK-LH7A404 board and clean up the
-  LH7A404 register macros.
-
-* Patch by Matthew McClintock, 10 Jun 2004:
-  Modify code to select correct serial clock on Sandpoint8245
-
-* Patch by Robert Schwebel, 10 Jun 2004:
-  Add support for Intel K3 strata flash.
-
-* Patch by Thomas Brand, 10 Jun 2004:
-  Fix "loads" command on DK1S10 board
-
-* Patch by Yuli Barcohen, 09 Jun 2004:
-  Add support for 8MB flash SIMM and JFFS2 file system on
-  Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
-
-* Patch by Yuli Barcohen, 09 Jun 2004:
-  Add support for Analogue&Micro Adder87x and the older AdderII board.
-
-* Patch by Ming-Len Wu, 09 Jun 2004:
-  Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
-
-* Patch by Sam Song, 09 Jun 2004:
-  - Add support for RPXlite_DW board
-  - Update FLASH driver for 4*AM29DL323DB90VI
-  - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
-
-* Patch by Mark Jonas, 08 June 2004:
-  - Make MPC5200 boards evaluate the SVR to print processor name and
-    version in checkcpu() (cpu/mpc5xxx/cpu.c).
-
-* Patch by Kai-Uwe Bloem, 06 May 2004:
-  Fix endianess problem in cramfs code
-
-* Patch by Tom Armistead, 04 Jun 2004:
-  Add support for MAX6900 RTC
-
-* Patches by Ladislav Michl, 03 Jun 2004:
-  - fix cfi_flash.c on LE systems
-  - let 'make mrproper' delete u-boot.img as well
-  - turn printf into debug in cfi_flash.c
-
-* Patch by Kurt Stremerch, 28 May 2004:
-  Add support for Exys XSEngine board
-
-* Patch by Martin Krause, 27 May 2004:
-  Fix a MPC5xxx I2C timing issue in i2c_probe().
-
-* Patch by Leif Lindholm, 27 May 2004:
-  Fix board_init_f() for dbau1x00 board.
-
-* Patch by Imre Deak, 26 May 2004:
-  On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
-  Set flash base accordingly, and decide whether to do or skip board
-  specific setup steps.
-
-* Patch by Josef Baumgartner, 26 May 2004:
-  Add missing define in include/asm-m68k/global_data.h
-
-* Patch by Josef Baumgartner, 25 May 2004:
-  Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
-
-* Patch by Paul Ruhland, 24 May 2004:
-  fix SDRAM initialization for LPD7A400 board.
-
-* Patch by Jian Zhang, 20 May 2004:
-  add support for environment in NAND flash
-
-* Patch by Yuli Barcohen, 20 May 2004:
-  Add support for Interphase iSPAN boards.
-
-* Patches by Paul Ruhland, 17 May 2004:
-  - Add I/O functions to the smc91111 ethernet driver to support the
-    Logic LPD7A40x boards.
-  - Add support for the Logic Zoom LH7A40x based SDK board(s),
-    specifically the LPD7A400.
-
-* Patches by Robert Schwebel, 15 May 2004:
-  - call MAC address reading code also for SMSC91C111;
-  - make SMSC91C111 timeout configurable, remove duplicate code
-  - fix get_timer() for PXA
-  - update doc/README.JFFS2
-  - use "bootfile" env variable also for jffs2
-
-* Patch by Tolunay Orkun, 14 May 2004:
-  Add support for Cogent CSB472 board (8MB Flash Rev)
-
-* Patch by Thomas Viehweger, 14 May 2004:
-  - flash.h: more flash types added
-  - immap_8260.h: some bits added (useful for RMII)
-  - cmd_coninfo.c: typo corrected, printf -> puts
-  - reduced size by replacing spaces with tab
-
-* Patch by Robert Schwebel, 13 May 2004:
-  Add 'imgextract' command: extract one part of a multi file image.
-
-* Patches by Jon Loeliger, 11 May 2004:
-  Dynamically handle REV1 and REV2 MPC85xx parts.
-    (Jon Loeliger, 10-May-2004).
-  New consistent memory map and Local Access Window across MPC85xx line.
-  New CCSRBAR at 0xE000_0000 now.
-  Add RAPID I/O memory map.
-  New memory map in README.MPC85xxads
-    (Kumar Gala, 10-May-2004)
-  Better board and CPU identification on MPC85xx boards at boot.
-    (Jon Loeliger, 10-May-2004)
-  SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
-  Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
-    (Jim Robertson, 10-May-2004)
-  Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
-  Supports multiple PHYs.
-    (Andy Fleming, 10-May-2004)
-  Some README.MPC85xxads updates.
-    (Kumar Gala, 10-May-2004)
-  Copyright updates for "Freescale"
-    (Andy Fleming, 10-May-2004)
-
-* Patch by Stephen Williams, 11 May 2004:
-  Add flash support for ST M29W040B
-  Reduce JSE specific flash.c to remove dead code.
-
-* Patch by Markus Pietrek, 04 May 2004:
-  Fix clear_bss code for ARM systems (all except s3c44b0 which
-  doesn't clear BSS at all?)
-
-* Fix "ping" problem on INC-IP board. Strange problem:
-  Sometimes the store word instruction hangs while writing to one of
-  the Switch registers, but only if the next instruction is 16-byte
-  aligned. Moving the instruction into a separate function somehow
-  makes the problem go away.
-
-* Patch by Rishi Bhattacharya, 08 May 2004:
-  Add support for TI OMAP5912 OSK Board
-
-* Patch by Sam Song May, 07 May 2004:
-  Fix typo of UPM table for rmu board
-
-* Patch by Pantelis Antoniou, 05 May 2004:
-  - Intracom board update.
-  - Add Codec POST.
-
-* Add support for the second Ethernet interface for the 'PPChameleon'
-  board.
-
-* Patch by Dave Peverley, 30 Apr 2004:
-  Add support for OMAP730 Perseus2 Development board
-
-* Patch by Alan J. Luse, 29 Apr 2004:
-  Fix flash chip-select (OR0) option register setting on FADS boards.
-
-* Patch by Alan J. Luse, 29 Apr 2004:
-  Report MII network speed and duplex setting properly when
-  auto-negotiate is not enabled.
-
-* Patch by Jarrett Redd, 29 Apr 2004:
-  Fix hang on reset on Ocotea board due to flash in wrong mode.
-
-* Patch by Dave Peverley, 29 Apr 2004:
-  add MAC address detection to smc91111 driver
-
-* Patch by David Müller, 28 Apr 2004:
-  fix typo in lib_arm/board.c
-
-* Patch by Tolunay Orkun, 20 Apr 2004:
-  - README update: add CONFIG_CSB272 and csb272_config
-  - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
-    i2cfast environment variable
-
-* Patch by Yuli Barcohen, 19 Apr 2004:
-  - Rename DUET_ADS to MPC885ADS
-  - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
-  - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
-  - Clean up FADS family port to use the new defines
-
-* Fix PCI support on CPC45 board
-
-* Patch by Scott McNutt, 25 Apr 2004:
-  Add Nios GDB/JTAG Console support:
-  - Add stubs to support gdb via JTAG.
-  - Add support for console over JTAG.
-  - Minor cleanup.
-
-* Add support for CATcenter board (based on PPChameleon ME module)
-
-* Patch by Klaus Heydeck, 12 May 2004:
-  Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
-  load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
-  various changes to KUP4 board specific files
-
-* Fix minor network problem on MPC5200: need some delay between
-  resetting the PHY and sending the first packet. Implemented in a
-  "natural" way by invoking the PHY reset and initialization code
-  only once after power on vs. each time the interface is brought up.
-
-* Add some limited support for low-speed devices to SL811 USB controller
-  (at least "usb reset" now passes successfully and "usb info" displays
-  correct information)
-
-* Change init sequence for multiple network interfaces: initialize
-  on-chip interfaces before external cards.
-
-* Fix memory leak in the NAND-specific JFFS2 code
-
-* Fix SL811 USB controller when attached to a USB hub
-
-* Fix config option spelling in PM520 config file
-
-* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
-  patches by Pantelis Antoniou, 30 Mar 2004)
-
-* Fix minor NAND JFFS2 related issue
-
-* Fixes for SL811 USB controller:
-  - implement workaround for broken memory stick
-  - improve error handling
-
-* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
-  cope with congested networks.
-
-======================================================================
-Changes for U-Boot 1.1.1:
-======================================================================
-
-* Patch by Travis Sawyer, 23 Apr 2004:
-  Fix VSC/CIS 8201 phy descrambler interoperability timing due to
-  errata from Vitesse Semiconductor.
-
-* Patch by Philippe Robin, 22 Apr 2004:
-  Fix ethernet configuration for "versatile" board
-
-* Patch by Kshitij Gupta, 21 Apr 2004:
-  Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
-
-* Patch by Steven Scholz, 24 Feb 2004:
-  Fix a bug in AT91RM9200 ethernet driver:
-  The MII interface is now initialized before accessing the PHY.
-
-* Patch by John Kerl, 19 Apr 2004:
-  Use U-boot's miiphy.h for PHY register names, rather than
-  introducing a new header file.
-
-* Update pci_ids.h from linux-2.4.26
-
-* Patch by Masami Komiya, 19 Apr 2004:
-  Fix problem cause by VLAN function on little endian architecture
-  without VLAN environment
-
-* Clean up the TQM8xx_YYMHz configurations; allow to use the same
-  binary image for all clock frequencies. Implement run-time
-  optimization of flash access timing based on the actual bus
-  frequency.
-
-* Modify KUP4X board configuration to use SL811 driver for USB memory
-  sticks (including FAT / VFAT filesystem support)
-
-* Add SL811 Host Controller Interface driver for USB
-
-* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
-
-* Patch by Pantelis Antoniou, 19 Apr 2004:
-  Allow to use shell style syntax (i. e. ${var} ) with standard parser.
-  Minor patches for Intracom boards.
-
-* Patch by Christian Pell, 19 Apr 2004:
-  cleanup support for CF/IDE on PCMCIA for PXA25X
-
-* Temporarily disabled John Kerl's extended MII command code because
-  "miivals.h" is missing
-
-* Patches by Mark Jonas, 13 Apr 2004:
-  - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
-  - Add sync instructions to IceCube SDRAM init code
-  - Move SDRAM chip constants into seperate include files
-  - Unify DDR and SDR initialization code
-  - Unify all IceCube (Lite5xxx) target names
-
-* Patch by John Kerl, 16 Apr 2004:
-  Enable ranges in mii command, e.g. mii read 0-1f 0 or
-  mii read 4-7 18-1a.  Also add mii dump subcommand for
-  pretty-printing standard regs 0-5.
-
-* Patch by  Stephen Williams, 16 April 2004:
-  fix typo in JSE.h; update MAINTAINERS
-
-* Patch by Matthew S. McClintock, 14 Apr 2004:
-  fix initdram function for utx8245 board
-
-* Patch by Markus Pietrek, 14 Apr 2004:
-  use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
-
-* Patch by Reinhard Meyer, 18 Apr 2004:
-  provide the IDE Reset Function for EMK 5200 boards
-
-* Patch by Masami Komiya, 12 Apr 2004:
-  fix pci_hose_write_config_{byte,word}_via_dword problems
-
-* Patch by Sangmoon Kim, 12 Apr 2004:
-  Update max RAM size for debris board
-
-* Patch by Travis Sawyer, 08 Apr 2004:
-  Add TLB entry for second DIMM slot on ocotea
-
-* Patch by Masami Komiya, 08 Apr 2004:
-  add RTL8169 network driver
-
-* Patch by Dan Malek, 07 Apr 2004:
-  - Add support for RPC/STx GP3, Motorola 8560 board
-  - Update 85xx TSEC driver so it searches MII for first available PHY
-    and uses that one.
-  - Add functions to support console MII commands.
-
-* Patch by Tolunay Orkun, 07 Apr 2004:
-  Move initialization of bi_iic_fast[]
-  from board_init_f() to board_init_r()
-
-* Patch by Yasushi Shoji, 07 Apr 2004:
-  Cleanup microblaze port
-
-* Patch by Sangmoon Kim, 07 Apr 2004:
-  Add auto SDRAM module detection for Debris board
-
-* Patch by Rune Torgersen, 06 Apr 2004:
-  - Fix some PCI problems on the MPC8266ADS board
-  - Fix the location of some PCI entries in the immap structure
-
-* Patch by Yasushi Shoji, 07 Apr 2004:
-  - add support for microblaze processors
-  - add support for AtmarkTechno "suzaku" board
-
-* Configure PPChameleon board to use redundand environment in flash
-
-* Configure PPChameleon board to use JFFS2 NAND support.
-
-* Added support for JFFS2 filesystem (read-only) on top of NAND flash
-
-* Patch by Rune Torgersen, 16 Apr 2004:
-  LBA48 fixes
-
-* Patches by Pantelis Antoniou, 16 Apr 2004:
-  - add support for a new version of an Intracom board and fix
-    various other things on others.
-  - add verify support to the crc32 command (define
-    CONFIG_CRC32_VERIFY to enable it)
-  - fix FEC driver for MPC8xx systems:
-    1. fix compilation problems for boards that use dynamic
-       allocation of DPRAM
-    2. shut down FEC after network transfers
-  - HUSH parser fixes:
-    1. A new test command was added. This is a simplified version of
-       the one in the bourne shell.
-    2. A new exit command was added which terminates the current
-       executing script.
-    3. Fixed handing of $? (exit code of last executed command)
-  - Fix some compile problems;
-    add "once" functionality for the netretry variable
-
-* Patch by George G. Davis, 02 Apr 2004:
-  add support for Intel Assabet board
-
-* Patch by Stephen Williams, 01 Apr 2004:
-  Add support for Picture Elements JSE board
-
-* Patch by Christian Pell, 01 Apr 2004:
-  Add CompactFlash support for PXA systems.
-
-* Patches by Pantelis Antoniou, 30 Mar 2004:
-  - add auto-complete support to the U-Boot CLI
-  - add support for NETTA and NETPHONE boards; fix NETVIA board
-  - add support for the Epson 156x series of graphical displays
-    (These displays are serial and not suitable for using a normal
-    framebuffer console on them)
-  - add infrastructure needed in order to POST any DSPs in a board
-  - improve and fix various things in the MPC8xx FEC driver:
-    1. The new 87x and 88x series of processors have two FECs,
-       and the new driver supports them both.
-    2. Another change in the 87x/88x series is support for
-       the RMII (Reduced MII) interface. However numerous
-       changes are needed to make it work since the PHYs
-       are connected to the same lines. That means that
-       you have to address them correctly over the MII
-       interface.
-    3. We now correctly match the MII/RMII interface
-       configuration to what the PHY reports.
-  - Fix problem when readingthe MII status register. Due to the
-    internal design of many PHYs you have to read the register
-    twice. The problem is more apparent in 10Mbit mode.
-  - add new mode ".jffs2s" for reading from a NAND device: it just
-    skips over bad blocks.
-  - add networking support for VLANs (802.1q), and CDP (Cisco
-    Discovery Protocol)
-  - some minor patches / cleanup
-
-* Patch by Yuli Barcohen, 28 Mar 2004:
-  - Add support for MPC8272 family including MPC8247/8248/8271/8272
-  - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
-  - Change configuration method for MPC8260ADS family
-
-* add startup code to clear the BSS of standalone applications
-
-* Fix if / elif handling bug in HUSH shell
-
-======================================================================
-Changes for U-Boot 1.1.0:
-======================================================================
-
-* Patch by Mark Jonas: Remove config.tmp files only when
-  unconfiguring the board
-
-* Adapt RMU board for bigger flash memory
-
-* Patch by Klaus Heydeck, 13 Mar 2003:
-  Add support for KUP4X Board
-
-* Patch by Pavel Bartusek, 21 Mar 2004
-  Add Reiserfs support
-
-* Patch by Hinko Kocevar, 20 Mar 2004
-  - Add auto-release for SMSC LAN91c111 driver
-  - Add save/restore of PTR and PNR regs as suggested in datasheet
-
-* Patch by Stephen Williams, 19 March 2004
-  Increase speed of sector reads from SystemACE,
-  shorten poll timeout and remove a useless reset
-
-* Patch by Tolunay Orkun, 19 Mar 2004:
-  Make GigE PHY 1000Mbps Speed/Duplex detection conditional
-  (CONFIG_PHY_GIGE)
-
-* Patch by Brad Kemp, 18 Mar 2004:
-  prevent machine checks during a PCI scan
-
-* Patch by Pierre Aubert, 18 Mar 2004:
-  Fix string cleaning in IDE identification
-
-* Patch by Pierre Aubert, 18 Mar 2004:
-  - Unify video mode handling for Chips & Technologies 69000 Video
-    chip and Silicon Motion SMI 712/710/810 Video chip
-  - Add selection of the video output (CRT or LCD) via 'videoout'
-    environment variable for the Silicon Motion
-  - README update
-
-* Patch by Pierre Aubert, 18 Mar 2004:
-  include/common.h typo fix
-
-* Patches by Tolunay Orkun, 17 Mar 2004:
-  - Add support for bd->bi_iic_fast[] initialization via environment
-    variable "i2cfast" (CONFIG_I2CFAST)
-  - Add "i2cfast" u-boot environment variable support for csb272
-
-* Patch by Carl Riechers, 17 Mar 2004:
-  Ignore '\0' characters in console input for use with telnet and
-  telco pads.
-
-* Patch by Leon Kukovec, 17 Mar 2004:
-  typo fix for strswab prototype #ifdef
-
-* Patches by Thomas Viehweger, 16 Mar 2004:
-  - show PCI clock frequency on MPC8260 systems
-  - add FCC_PSMR_RMII flag for HiP7 processors
-  - in do_jffs2_fsload(), take load address from load_addr if not set
-    explicit, update load_addr otherwise
-  - replaced printf by putc/puts when no formatting is needed
-    (smaller code size, faster execution)
-
-* Patch by Phillippe Robin, 16 Mar 2004:
-  avoid dereferencing NULL pointer in lib_arm/armlinux.c
-
-* Patch by Stephen Williams, 15 Mar 2004:
-  Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
-
-* Patch by Tolunay Orkun, 15 Mar 2004:
-  Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
-
-* Patch by Travis Sawyer, 15 Mar 2004:
-  Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
-
-* Add start-up delay to make sure power has stabilized before
-  attempting to switch on USB on SX1 board.
-
-* Patch by Josef Wagner, 18 Mar 2004:
-  - Add support for MicroSys XM250 board (PXA255)
-  - Add support for MicroSys PM828 board (MPC8280)
-  - Add support for 32 MB Flash on PM825/826
-  - new SDRAM refresh rate for PM825/PM826
-  - added support for MicroSys PM520 (MPC5200)
-  - replaced Query by Identify command in CPU86/flash.c
-    to support 28F160F3B
-
-* Fix wrap around problem with udelay() on ARM920T
-
-* Add support for Macronix flash on TRAB board
-
-* Patch by Pierre Aubert, 15 Mar 2004:
-  Fix buffer overflow in IDE identification
-
-* Fix power-off of LCD for out-of-band temperatures on LWMON board
-
-* Remove redundand #define in IceCube.h
-
-* Patch by Steven Scholz, 27 Feb 2004:
-  - Adding get_ticks() and get_tbclk() for AT91RM9200
-  - Many white space fixes in cpu/at91rm9200/interrupts.c
-
-* Patches by Steven Scholz, 20 Feb 2004:
-  some cleanup in AT91RM9200 related code
-
-* Patches by Travis Sawyer, 12 Mar 2004:
-  - Fix Gigabit Ethernet support for 440GX
-  - Add Gigabit Ethernet Support to MII PHY utilities
-
-* Patch by Brad Kemp, 12 Mar 2004:
-  Fixes for drivers/cfi_flash.c:
-  - Better support for x8/x16 implementations
-  - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
-  - Added defines for AMD command and address constants
-
-* Patch by Leon Kukovec, 12 Mar 2004:
-  Fix get_dentfromdir() to correctly handle deleted dentries
-
-* Patch by George G. Davis, 11 Mar 2004:
-  Remove hard coded network settings in TI OMAP1610 H2
-  default board config
-
-* Patch by George G. Davis, 11 Mar 2004:
-  add support for ADS GraphicsClient+ board.
-
-* Patch by Pierre Aubert, 11 Mar 2004:
-  - add bitmap command and splash screen support in cfb console
-  - add [optional] origin in the bitmap display command
-
-* Patch by Travis Sawyer, 11 Mar 2004:
-  Fix ocotea board early init interrupt setup.
-
-* Patch by Thomas Viehweger, 11 Mar 2004:
-  Remove redundand code; add  PCI-specific bits to include/mpc8260.h
-
-* Patch by Stephan Linz, 09 Mar 2004
-  - Add support for the SSV ADNP/ESC1 (Nios Softcore)
-
-* Patch by George G. Davis, 9 Mar 2004:
-  fix recent build failure for SA1100 target
-
-* Patch by Travis Sawyer, 09 Mar 2004:
-  Support native interrupt mode for the IBM440GX.
-  Previously it was running in 440GP compatibility mode.
-
-* Patch by Philippe Robin, 09 Mar 2004:
-  Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
-  Platform support.
-
-* Patch by Masami Komiya, 08 Mar 2004:
-  Don't overwrite server IP address or boot file name
-  when the boot server does not return values
-
-* Patch by Tolunay Orkun, 5 Mar 2004:
-  Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
-
-* Patch by Tolunay Orkun, 5 Mar 2004:
-  Fix early board initialization for Cogent CSB272 board
-
-* Patch by Ed Okerson, 3 Mar 2004:
-  fix CFI flash writes for little endian systems
-
-* Patch by Reinhard Meyer, 01 Mar 2004:
-  generalize USB and IDE support for MPC5200 with according
-  changes to IceCube.h and TOP5200.h
-  add Am29LV256 256 MBit FLASH support for TOP5200 boards
-  add info about USB and IDE to README
-
-* Patch by Yuli Barcohen, 4 Mar 2004:
-  Fix problems with GCC 3.3.x which changed handling of global
-  variables explicitly initialized to zero (now in .bss instead of
-  .data as before).
-
-* Patch by Leon Kukovec, 02 Mar 2004:
-  add strswab() to fix IDE LBA capacity, firmware and model numbers
-  on little endian machines
-
-* Patch by Masami Komiya, 02 Mar 2004:
-  - Remove get_ticks() from NFS code
-  - Add verification of RPC transaction ID
-
-* Patch by Pierre Aubert, 02 Mar 2004:
-  cleanup for IDE and USB drivers for MPC5200
-
-* Patch by Travis Sawyer, 01 Mar 2004:
-  Ocotea:
-  - Add IBM PPC440GX Ref Platform support (Ocotea)
-    Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
-    Adapted to U-Boot and 440GX port
-  440gx_enet.c:
-  - Add gracious handling of all Ethernet Pin Selections for 440GX
-  - Add RGMII selection for Cicada CIS8201 Gigabit PHY
-  ppc440.h:
-  - Add needed bit definitions
-  - Fix formatting
-
-* Patch by Carl Riechers, 1 Mar 2004:
-  Add PPC440GX prbdv0 divider to fix memory clock calculation.
-
-* Patch by Stephan Linz, 27 Feb 2004
-  - avoid problems for targets without NFS download support
-
-* Patch by Rune Torgersen, 27 Feb 2004:
-  - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
-  - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
-  - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
-
-* Patch by Masami Komiya, 27 Feb 2004:
-  Fix rarpboot: add autoload by NFS
-
-* Patch by Dan Eisenhut, 26 Feb 2004:
-  fix flash_write return value in saveenv
-
-* Patch by Stephan Linz, 11 Dec 2003
-  expand config.mk to avoid trigraph warnings on NIOS
-
-* Rename "BMS2003" board into "HMI10"
-
-* SX1 patches: use "serial#" for USB serial #; use redundand environment
-  storage; auto-set console on USB port (using preboot command)
-
-* Add support for SX1 mobile phone; add support for USB-based console
-  (enable with "setenv stdout usbtty; setenv stdin usbtty")
-
-* Fix LOWBOOT configuration for MPC5200 with DDR memory
-
-* Fix SDRAM timings for LITE5200 / IceCube board
-
-* Handle Auti-MDIX / connection status for INCA-IP
-
-* Fix USB problems when attempting to read 0 bytes
-
-* Patch by Travis Sawyer, 26 Feb 2004:
-  Fix broken compile for XPEDITE1K target.
-
-* Patch by Stephan Linz, 26 Feb 2004:
-  Bug fix for NFS code on NIOS targets
-
-* Patch by Stephen Williams, 26 Feb 2004:
-  Break up SystemACE reads of large block counts
-
-* Patch by Pierre Aubert, 26 Feb 2004
-  add IDE support for MPC5200
-
-* Patch by Masami Komiya, 26 Feb 2004:
-  add autoload via NFS
-
-* Patch by Stephen Williams
-  Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
-  elsewhere in the source.
-
-* Patch by Steven Scholz, 25 Feb 2004:
-  - Timeouts in FPGA code should be based on CFG_HZ
-  - Minor cleanup in code for Altera FPGA ACEX1K
-
-* Patch by Steven Scholz, 25 Feb 2004:
-  Changed "Directory Hierarchy" section in README
-
-* Patch by Masami Komiya, 25 Feb 2004:
-  Reduce copy count in nfs_read_reply() of NFS code
-
-* Patch by Markus Pietrek, 24 Feb 2004:
-  NS9750 DevBoard added
-
-* Patch by Pierre Aubert, 24 Feb 2004
-  add USB support for MPC5200
-
-* Patch by Steven Scholz, 24 Feb 2004:
-  - fix MII commands to use values from last command
-
-* Patch by Torsten Demke, 24 Feb 2004:
-  Add support for the eXalion platform (SPSW-8240, F-30, F-300)
-
-* Patch by Rahul Shanbhag, 19 Feb 2004:
-  Fixes for for OMAP1610 board:
-  - shift some IRQ specific code to platform.S file
-  - remove duplicatewatchdog reset code from start.S
-
-* Make Auto-MDIX Support configurable on INCA-IP board
-
-* Fix license for mkimage tool
-
-* Patch by Masami Komiya, 24 Feb 2004:
-  Update NetBootFileXferSize in NFS code
-
-* Patch by Scott McNutt, 24 Feb 2004:
-  fix packet length in NFS code
-
-* Patch by Masami Komiy, 22 Feb 2004:
-  Add support for NFS for file download
-
-* Patch by Andrea Scian, 17 Feb 2004:
-  Add support for S3C44B0 processor and DAVE B2 board
-
-* Patch by Steven Scholz, 20 Feb 2004:
-  - Add support for MII commands on AT91RM9200 boards
-  - some cleanup in AT91RM9200 ethernet code
-
-* Patch by Peter Ryser, 20 Feb 2004:
-  Add support for the Xilinx ML300 platform
-
-* Patch by Stephan Linz, 17 Feb 2004:
-  Fix watchdog support for NIOS
-
-* Patch by Josh Fryman, 16 Feb 2004:
-  Fix byte-swapping for cfi_flash.c for different bus widths
-
-* Patch by Jon Diekema, 14 Jeb 2004:
-  Remove duplicate "FPGA Support" notes from the README file
-
-* Patches by Reinhard Meyer, 14 Feb 2004:
-  - update board/emk tree; use common flash driver
-  - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
-    [adapted for other PPC CPUs -- wd]
-  - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
-
-* Patch by Jon Diekema, 13 Feb 2004:
-  Call show_boot_progress() whenever POST "FAILED" is printed.
-
-* Patch by Nishant Kamat, 13 Feb 2004:
-  Add support for TI OMAP1610 H2 Board
-  Fixes for cpu/arm926ejs/interrupt.c
-	(based on Richard Woodruff's patch for arm925, 16 Oct 03)
-  Fix for a timer bug in OMAP1610 Innovator
-  Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
-
-* Patches by Stephan Linz, 12 Feb 2004:
-  - add support for NIOS timer with variable period preload counter value
-  - prepare POST framework support for NIOS targets
-
-* Patch by Denis Peter, 11 Feb 2004:
-  add POST support for the MIP405 board
-
-* Patch by Laurent Mohin, 10 Feb 2004:
-  Fix buffer overflow in common/usb.c
-
-* Patch by Tolunay Orkun, 10 Feb 2004:
-  Add support for Cogent CSB272 board
-
-* Patch by Thomas Elste, 10 Feb 2004:
-  Add support for NET+50 CPU and ModNET50 board
-
-* Patch by Sam Song, 10 Feb 2004:
-  Fix typos in cfi_flash.c
-
-* Patch by Leon Kukovec, 10 Feb 2004
-  Fixed long dir entry slot id calculation in get_vfatname
-
-* Patch by Robin Gilks, 10 Feb 2004:
-  add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
-  !=, <>, <, >, <=, >=)
-
-* Fix problem with side effects in macros in include/usb.h
-
-* Patch by David Benson, 13 Nov 2003:
-  bug 841358 - fix TFTP download size limit
-
-* Fixing bug 850768:
-  improper flush_cache() in load_serial()
-
-* Fixing bug 834943:
-  MPC8540 - missing volatile declarations
-
-* Patch by Stephen Williams, 09 Feb 2004:
-  Add support for Xilinx SystemACE chip:
-  - New files common/cmd_ace.c and include/systemace.h
-  - Hook systemace support into cmd_fat and the partition manager
-
-* Patch by Travis Sawyer, 09 Feb 2004:
-  Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
-
-* Patch by Travis Sawyer, 09 Feb 2004:
-  o 440GX:
-    - Fix PCI Indirect access for type 1 config cycles with ppc440.
-    - Add phymode for 440 enet
-    - fix pci pre init
-  o XPedite1K:
-    - Change board_pre_init to board_early_init_f
-    - Add user flash to bus controller setup
-    - Fix pci pre init
-    - Fix is_pci_host to check GPIO for monarch bit
-    - Force xpedite1k to pci conventional mode (via #define option)
-
-* Patch by Brad Kemp, 4 Feb 2004:
-  - handle the machine check that is generated during the PCI scans
-    on 82xx processors.
-  - define the registers used in the IMMR by the PCI subsystem.
-
-* Patch by Pierre Aubert, 03 Feb 2004:
-  cpu/mpc5xxx/start.S: copy MBAR into SPR311
-
-* Patch by Jeff Angielski, 03 Feb 2004:
-  Fix copy & paste error in cpu/mpc8260/pci.c
-
-* Patch by Reinhard Meyer, 24 Jan 2004:
-  Fix typo in cpu/mpc5xxx/pci_mpc5200.c
-
-* Add Auto-MDIX support for INCA-IP
-
-* Some code cleanup
-
-* Patch by Josef Baumgartner, 10 Feb 2004:
-  Fixes for ColdFire port
-
-* Patch by Brad Kemp, 11 Feb 2004:
-  Fix CFI flash driver problems
-
-* Make sure to use a bus clock divider of 2 only when running TQM8xxM
-  modules at CPU clock frequencies above 66 MHz.
-
-* Optimize flash programming speed for LWMON (by another 100% :-)
-
-* Patch by Jian Zhang, 3 Feb 2004:
-  - Changed the incorrect FAT12BUFSIZE
-  - data_begin in fsdata can be negative. Changed it to be short.
-
-* Patches by Stephan Linz, 30 Jan 2004:
-  1: - board/altera/common/flash.c:flash_erase():
-       o allow interrupts befor get_timer() call
-       o check-up each erased sector and avoid unexpected timeouts
-     - board/altera/dk1c20/dk1s10.c:board_early_init_f():
-       o enclose sevenseg_set() in cpp condition
-     - remove the ASMI configuration for DK1S10_standard_32 (never present)
-     - fix some typed in mistakes in the NIOS documentation
-  2: - split DK1C20 configuration into several header files:
-       o two new files for each NIOS CPU description
-       o U-Boot related part is remaining in DK1C20.h
-  3: - split DK1S10 configuration into several header files:
-       o two new files for each NIOS CPU description
-       o U-Boot related part is remaining in DK1S10.h
-  4: - Add support for the Microtronix Linux Development Kit
-       NIOS CPU configuration at the Altera Nios Development Kit,
-       Stratix Edition (DK-1S10)
-  5: - Add documentation for the Altera Nios Development Kit,
-       Stratix Edition (DK-1S10)
-  6: - Add support for the Nios Serial Peripharel Interface (SPI)
-       (master only)
-  7: - Add support for the common U-Boot SPI framework at
-       RTC driver DS1306
-
-* Patch by Rahul Shanbhag, 28 Jan 2004:
-  Fix flash protection/locking handling for OMAP1610 innovator board.
-
-* Patch by Rolf Peukert, 28 Jan 2004:
-  fix flash write problems on CSB226 board (write with 32 bit bus width)
-
-* Patches by Mark Jonas, 16 Jan 2004:
-  - fix rounding error when calculating baudrates for MPC5200 PSCs
-  - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
-    time which is not supported
-
-* Patch by Yuli Barcohen, 26 Jan 2004:
-  Allow bzip2 compression for small memory footprint boards
-
-* Patch by Brad Kemp, 21 Jan 2004:
-  Add support for CFI flash driver for both the Intel and the AMD
-  command sets.
-
-* Patch by Travis Sawyer, 20 Jan 2004:
-  Fix pci bridge auto enumeration of sibling p2p bridges.
-
-* Patch by Tolunay Orkun, 12 Jan 2004:
-  Add some delays as needed for Intel LXT971A PHY support
-
-* Patches by Stephan Linz, 09 Jan 2004:
-  - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
-  - make DK1C20 board configuration related to ASMI conform to
-    documentation
-
-* Patch by Anders Larsen, 09 Jan 2004:
-
-  ARM memory layout fixes: the abort-stack is now set up in the
-  correct RAM area, and the BSS is zeroed out as it should be.
-
-  Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
-  of the linker scripts are replaced by '__bss_start' and '_end',
-  resp., which is a further step to eliminate unnecessary differences
-  between the implementation of the CPU architectures.
-
-* Patch by liang a lei, 9 Jan 2004:
-  Fix Intel 28F128J3 ID in include/flash.h
-
-* Patch by Masami Komiya, 09 Jan 2004:
-  add support for TB0229 board (NEC VR4131 MIPS processor)
-
-* Patch by Leon Kukovec, 12 Dec 2003:
-  changed extern __inline__ into static __inline__ in
-  include/linux/byteorder/swab.h
-
-* Patch by Travis Sawyer, 30 Dec 2003:
-  Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
-  select MDI port based on enabled EMAC device.
-  Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
-  base PrPMC board.
-
-* Patch by Wolter Kamphuis, 15 Dec 2003:
-  made CONFIG_SILENT_CONSOLE usable on all architectures
-
-* Disable date command on TQM866M - there is no RTC on MPC866
-
-* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
-
-* Implement adaptive SDRAM timing configuration based on actual CPU
-  clock frequency for INCA-IP; fix problem with board hanging when
-  switching from 150MHz to 100MHz
-
-* Add PCMCIA CS support for BMS2003 board
-
-* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
-  see doc/README.MPC866 for details;
-  implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
-  calculate CPU clock frequency from PLL register values.
-
-* Add support for 128 MB RAM on TQM8xxL/M modules
-
-* Fix PS/2 keyboard problem caused by statically initialized variable
-  pointing to a location in flash
-
-* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
-
-* The PS/2 mux on the BMS2003 board needs 450 ms after power on
-  before we can access it; add delay in case we are faster (with no
-  CF card inserted)
-
-* Cleanup of some init functions
-
-* Make sure SCC Ethernet is always stopped by the time we boot Linux
-  to avoid Linux crashes by early packets coming in.
-
-* Accelerate flash accesses on LWMON board by using buffered writes
-
-* Fix typo in Makefile;
-  fix problem with PARTNUM detection
-
-* Patch by Reinhard Meyer, 09 Jan 2004:
-  - add RTC support for MPC5200 based boards (requires RTC_XTAL)
-
-* Add support for IDE LED on BMS2003 board
-  (exclusive with status LED!)
-
-* Add support for PS/2 keyboard (used with PS/2 multiplexor on
-  BMS2003 board)
-
-* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
-  Add common files for "emk" boards
-
-* Add a common get_ram_size() function and modify the the
-  board-specific files to invoke that common implementation.
-
-======================================================================
-Changes for U-Boot 1.0.1:
-======================================================================
-
-* Set default clock for INCA-IP to 150 MHz
-
-* Make BMS2003 use a separate config file to avoid #ifdef mess;
-  add I2C support; add support for DS1337 RTC
-
-* Add CompactFlash support  for BMS2003 board
-
-* Add support for status LED on BMS2003 board
-
-* Patch by Scott McNutt, 02 Jan 2004:
-  Add support for the Nios Active Serial Memory Interface (ASMI)
-  on Cyclone devices
-
-* Patch by Andrea Marson, 16 Dec 2003:
-  Add support for the PPChameleon ME and HI modules
-
-* Patch by Yuli Barcohen, 22 Dec 2003:
-  Add support for Motorola DUET ADS board (MPC87x/88x)
-
-* Patch by Robert Schwebel, 15 Dec 2003:
-  add support for cramfs (uses JFFS2 command interface)
-
-* Patches by Stephan Linz, 11 Dec 2003:
-  - more documentation for NIOS port
-  - new struct nios_pio_t, struct nios_spi_t
-  - Reconfiguration for NIOS Development Kit DK1C20:
-    o move board related code from board/dk1c20
-      to board/altera/dk1c20
-    o create a new common source path board/altera/common
-      and move generic flash access stuff into it
-    o change/expand configuration file DK1C20.h
-  - Add support for NIOS Development Kit DK1S10
-  - Add status LED support for NIOS systems
-  - Add dual 7-segment LED support for Altera NIOS DevKits
-
-* Patch by Ronen Shitrit, 10 Dec 2003:
-  Add support for the Marvell DB64360 / DB64460 development boards
-
-* Patch by Detlev Zundel, 10 Dec 2003:
-  fix dependency problem in examples/Makefile
-
-* Patch by Denis Peter, 8 Dec 2003
-  - add support for the PATI board (MPC555)
-  - add SPI support for the MPC5xx
-
-* Patch by Anders Larsen, 08 Dec 2003:
-  add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
-  to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
-  cleanup some redundand #defines
-
-* Patch by André Schwarz, 8 Dec 2003:
-  fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
-  - TX and RX deskriptors must be quad-word aligned
-  - does not work with only one TX deskriptor
-  - standard reset method does not work
-
-* Patch by Masami Komiya, 08 Dec 2003:
-  add RTL8139 ethernet driver
-
-* Patches by Ed Okerson, 07 Dec 2003:
-  - fix ethernet for the AU1x00 processors in little-endian mode.
-  - extend memsetup.S for the AU1x00 processors in BE and LE modes
-
-* Minor code cleanup (coding style)
-
-* Patch by Reinhard Meyer, 30 Dec 2003:
-  - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
-  - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
-  - turned debug print of PHY registers into a function (called in two places)
-  - added support for EMK MPC5200 based modules
-
-* Fix MPC8xx PLPRCR_MFD_SHIFT typo
-
-* Add support for TQM866M modules
-
-* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
-
-* Fix a few compiler warnings
-
-* Patch by Reinhard Meyer, 28 Dec 2003:
-  Add initial support for TOP5200 board
-
-* Make CPU clock on ICA-IP board controllable by a "cpuclk"
-  environment variable which can set to "100", "133", or "150". The
-  CPU clock will be configured accordingly upon next reboot. Other
-  values are ignored. In case of an invalid or undefined "cpuclk"
-  value, the compile-time default CPU clock speed will be used.
-
-* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
-  window that is used to access the UART registers by the Linux driver)
-
-* Patch by Reinhard Meyer, 20 Dec 2003:
-  Fix clock calculation for the MPC5200 for higher clock frequencies
-  (above 2**32 / 10 = 429.5 MHz).
-
-* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
-
-* Fix IceCube CLKIN configuration (it's 33.000000MHz)
-
-* Add new configuration for IceCube board with DDR memory
-
-* Update TRAB memory configurations
-
-* Add JFFS2 support for INCA-IP board
-
-* Patch by Bill Hargen, 09 Dec 2003:
-  - BUBINGA405EP: changed flash driver to protect top sector containing
-    first instruction.
-  - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
-  - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
-  - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
-  - 405EP: added/fixed support for "reginfo" command.
-  - 4xx: removed spurious MII error messages on "mii info" command.
-
-* Patch by Bernhard Kuhn, 28 Nov 2003:
-  add support for ColdFire CPU
-  add support for Motorola M5272C3 and M5282EVB boards
-
-* Patch by Pierre Aubert, 24 Nov 2003:
-  - add a return value for the fpga command
-  - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
-    is defined. If ide_preinit fails, ide_init is aborted.
-  - fix an endianess problem in fat.h
-
-* Patch by Wolter Kamphuis, 05 Dec 2003:
-  Add support for SNMC's QS850/QS823/QS860T boards
-
-* Patch by Yuli Barcohen, 3 Dec 2003:
-  "revive" U-Boot support for old Motorola MPC860ADS board
-
-* Patch by Cam(ilo?), 03 Dec 2003:
-  make examples build even with broken Montavista objcopy
-
-* Patch by Pavel Bartusek, 27 Nov 2003:
-  fix conversion problem with "bootretry" evironment variable
-
-* Patch by Andre Schwarz, 24 Nov 2003:
-  add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
-
-* Patch by Pavel Bartusek, 21 Nov 2003:
-  set ZMII bridge speed on 440
-
-* Patch by Anders Larsen, 17 Nov 2003:
-  Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
-
-* Patches by David Müller, 14 Nov 2003:
-  - board/mpl/common/common_util.c
-    * implement support for BZIP2 compressed images
-    * various cleanups (printf -> puts, ...)
-  - board/mpl/common/flash.c
-    * report correct errors to upper layers
-    * check the erase fail and VPP low bits in status reg
-  - board/mpl/vcma9/cmd_vcma9.c
-  - board/mpl/vcma9/flash.c
-    * various cleanups (printf -> puts, ...)
-  - common/cmd_usb.c
-    * fix typo in comment
-  - cpu/arm920t/usb_ohci.c
-    * support for S3C2410 is missing in #if line
-  - drivers/cs8900.c
-    * reinit some registers in case of error (cable missing, ...)
-  - fs/fat/fat.c
-    * support for USB/MMC devices is missing in #if line
-  - include/configs/MIP405.h
-  - include/configs/PIP405.h
-    * enable BZIP2 support
-    * enlarge malloc space to 1MiB because of BZIP2 support
-  - include/configs/VCMA9.h
-    * enable BZIP2 support
-    * enlarge malloc space to 1MiB because of BZIP2 support
-    * enable USB support
-  - lib_arm/armlinux.c
-    * change calling convention of ARM Linux kernel as
-      described on http://www.arm.linux.org.uk/developer/booting.php
-
-* Patch by Thomas Lange, 14 Nov 2003:
-  Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
-  support all these AMD boards.
-
-* Patch by Thomas Lange, 14 Nov 2003:
-  Workaround for mips au1x00 physical memory accesses (the au1x00
-  uses a 36 bit bus internally and cannot access physical memory
-  directly. Use the uncached SDRAM address instead of the physical
-  one.)
-
-* Patch by Xue Ligong (Joe), 13 Nov 2003:
-  add Realtek 8019 ethernet driver
-
-* Patch by Yuli Barcohen, 13 Nov 2003:
-  MPC826xADS/PQ2FADS  cleanup
-
-* Patch by Anders Larsen, 12 Nov 2003:
-  Update README to mark the PORTIO commands non-standard
-
-* Patch by Nicolas Lacressonnière, 12 Nov 2003:
-  update for for Atmel AT91RM9200DK development kit:
-  - support for environment variables in DataFlash
-  - Atmel DataFlash AT45DB1282 support
-
-* Patch by Jeff Carr, 11 Nov 2003:
-  add support for new version of 8270 processors
-
-* Patches by George G. Davis, 05 Nov 2003:
-  - only pass the ARM linux initrd tag to the kernel when an initrd
-    is actually present
-  - update omap1510inn configuration file
-
-* Patches by Stephan Linz, 3 Nov 2003:
-  - more endianess fixes for LAN91C111 driver
-  - CFG_HZ configuration patch for NIOS Cyclone board
-
-* Patch by Stephan Linz, 28 Oct 2003:
-  fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
-
-* Patch by Steven Scholz, 20 Oct 2003:
-  - make "mii info <addr>" show infor for PHY at "addr" only
-  - Endian fix for miiphy_info()
-
-* Patch by Gleb Natapov, 19 Sep 2003:
-  Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
-
-* Patch by Anders Larsen, 17 Sep 2003:
-  Bring ARM memory layout in sync with the documentation:
-  stack and malloc-heap are now located _below_ the U-Boot code
-
-* Accelerate booting on TRAB board: read and check  autoupdate	image
-  headers first instead of always reading the whole images.
-
-* Fix type in MPC5XXX code (pointed out by Victor Wren)
-
-* Enabled password check on RMU board
-
-* Fix configuration problem with IceCube in LOWBOOT configuration:
-  envrionment got embedded, corrupting the image layout.
-
-* Fix NEC display names (it's 6440 [for 640x480], not 6640).
-
-* Added BMS2003 board
-  add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
-
-* Fix flash driver for TRAB board (must use Unlock Bypass Reset
-  command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
-  and CPLD
-
-* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
-  recent tools
-
-* Add checksum verification to 'imls' command
-
-* Add bd_info fields needed for 4xx Linux I2C driver
-
-* Patch by Martin Krause, 4 Nov. 2003:
-  Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
-
-* Print used network interface when CONFIG_NET_MULTI is set
-
-* Patch by Bernhard Kuhn, 28 Oct 2003:
-  Add low boot support for MPC5200
-
-* Fix problem with dual PCMCIA support (NSCU)
-
-* Fix MPC5200 I2C initialization function
-
-======================================================================
-Changes for U-Boot 1.0.0:
-======================================================================
-
-* Fix parameter passing to standalone images with bootm command
-
-* Patch by Kyle Harris, 30 Oct 2003:
-  Fix build errors for ixdp425 board
-
-* Patch by David M. Horn, 29 Oct 2003:
-  Fixes to build under CYGWIN
-
-* Get IceCube MGT5100 working (again)
-
-* Fix problems in memory test on some boards (which was not
-  non-destructive as intended)
-
-* Patch by Gary Jennejohn, 28 Oct 2003:
-  Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
-  to prevent stack overflow on ARM systems
-
-* Patch by Stephan Linz, 28 Oct 2003:
-  fix init sequence error for NIOS port
-
-* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
-
-* Add CONFIG_VERSION_VARIABLE to TRAB configuration
-
-* Patch by Xiao Xianghua, 23 Oct 2003:
-  small patch for mpc85xx
-
-* Fix small problem in MPC5200 I2C driver
-
-* Fix FCC3 support on ATC board
-
-* Correct header printing for multi-image files in do_bootm()
-
-* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
-
-* Fix PCI problems on PPChameleon board
-
-* Patch by Steven Scholz, 18 Oct 2003:
-  Fix AT91RM9200 ethernet driver
-
-* Patch by Nye Liu, 17 Oct 2003:
-  Fix typo in include/mpc8xx.h
-
-* Patch by Richard Woodruff, 16 Oct 03:
-  Fixes for cpu/arm925/interrupt.c
-  - Initialize timestamp & lastdec vars.
-  - fix timestamp overflows.
-  - fix lastdec overflow.
-  - smarter normalization to allow udelay() below 1ms to work.
-
-* Patch by Scott McNutt, 16 Oct
-  add networking support for the Altera Nios Development Kit,
-  Cyclone Edition (DK-1C20)
-
-* Patch by Jon Diekema, 14 Oct 2003:
-  add hint about doc/README.silent to README file
-
-* Add CompactFlash support for NSCU
-
-* Fix PCI problems on PPChameleonEVB
-
-* TRAB auto-update: Base decision if we have to strip the image
-  header on image type as encoded in the header
-  (include image type patch by Martin Krause, 17 Oct 2003)
-
-* Patches by Xianghua Xiao, 15 Oct 2003:
-
-  - Added Motorola CPU 8540/8560 support (cpu/85xx)
-  - Added Motorola MPC8540ADS board support (board/mpc8540ads)
-  - Added Motorola MPC8560ADS board support (board/mpc8560ads)
-
-* Fix flash timings on TRAB board
-
-* Make sure HUSH is initialized for running auto-update scripts
-
-* Make 5200 reset command _really_ reset the board, without running
-  any other code after it
-
-* Fix errors with flash erase when range spans	across banks
-  that are mapped in reverse order
-
-* Fix flash mapping and display on P3G4 board
-
-* Patch by Kyle Harris, 15 Jul 2003:
-  - add support for Intel IXP425 CPU
-  - add support for IXDP425 eval board
-
-* Added config option CONFIG_SILENT_CONSOLE.  See doc/README.silent
-  for more information
-
-* Patch by Steven Scholz, 10 Oct 2003
-  - Add support for Altera FPGA ACEX1K
-
-* Patches by Thomas Lange, 09 Oct 2003:
-  - fix cmd_ide.c for non ppc boards (read/write functions did not
-    add ATA base address)
-  - fix for shannon board
-  - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
-  - Endian swap ATA identity for all big endian CPUs, not just PPC
-  - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
-    args to linux
-  - add support for dbau1x00 board (MIPS32)
-
-* Patch by Sangmoon Kim, 07 Oct 2003:
-  add support for debris board
-
-* Patch by Martin Krause, 09 Oct 2003:
-  Fixes for TRAB board
-  - /board/trab/rs485.c: correct baudrate
-  - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
-    udelay(); fix some timing problems with adc controller
-  - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
-    modify commands: touch and buzzer
-
-* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
-  (quick & dirty workaround for rogue pointer problem in get_vfatname());
-  Use direct function calls for auto_update instead of hush commands
-
-* Patch by Scott McNutt, 04 Oct 2003:
-  - add support for Altera Nios-32 CPU
-  - add support for Nios Cyclone Development Kit (DK-1C20)
-
-* Patch by Steven Scholz, 29 Sep 2003:
-  - A second parameter for bootm overwrites the load address for
-    "Standalone Application" images.
-  - bootm sets environment variable "filesize" to the resulting
-    (uncompressed) data length for "Standalone Application" images
-    when autostart is set to "no". Now you can do something like
-	if bootm $fpgadata $some_free_ram ; then
-		fpga load 0 $some_free_ram $filesize
-	fi
-
-* Patch by Denis Peter, 25 Sept 2003:
-  add support for the MIP405 Rev. C board
-
-* Patch by Yuli Barcohen, 25 Sep 2003:
-  add support for Zephyr Engineering ZPC.1900 board
-
-* Patch by Anders Larsen, 23 Sep 2003:
-  add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
-  implemented for the x86 architecture)
-
-* Patch by Sangmoon Kim, 23 Sep 2003:
-  fix pll_pci_to_mem_multiplier table for MPC8245
-
-* Patch by Anders Larsen, 22 Sep 2003:
-  enable timed autoboot on PXA
-
-* Patch by David Müller, 22 Sep 2003:
-  - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
-    returns correct libgcc file path
-  - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
-    time on s3c24x0 systems
-
-* Patch by Jon Diekema, 19 Sep 2003:
-  - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
-    link state to the fault LED.
-  - In NetLoop, make the Fault LED reflect the link status.  The link
-    status gets updated on entry, and on timeouts.
-
-* Patch by Anders Larsen, 18 Sep 2003:
-  allow mkimage to build and run on Cygwin-hosted systems
-
-* Patch by Frank Müller, 18 Sep 2003:
-  use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
-  cpu/mpc8xx/fec.c
-
-* Patch by Pantelis Antoniou, 16 Sep 2003:
-  add tool to compute fileds in the PLPRCR register for MPC86x
-
-* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
-
-* Fix build problems under FreeBSD
-
-* Add generic filesystem image type
-
-* Make fatload set filesize environment variable
-
-* enable basic / medium / high-end configurations for PPChameleonEVB
-  board; fix NAND code
-
-* enable TFTP client code to specify to the server the desired
-  timeout value (see RFC-2349)
-
-* Improve SDRAM setup for TRAB board
-
-* Suppress all output with splashscreen configured only if "splashimage"
-  is set
-
-* Fix problems with I2C support for mpc5200
-
-* Adapt TRAB configuration and auto_update to new memory layout
-
-* Add configuration for wtk board
-
-* Add support for the Sharp LQ065T9DR51U LCD display
-
-* Patch by Rune Torgersen, 17 Sep 2003:
-  - Fixes for MPC8266 default config
-  - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
-
-* Patches by Jon Diekema, 17 Sep 2003:
-  - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
-    env_common.c)
-  - sbc8260 tweaks
-  - adjust "help" output
-
-* Patches by Anders Larsen, 17 Sep 2003:
-  - fix spelling errors
-  - set GD_FLG_DEVINIT flag only after device function pointers
-    are valid
-  - Allow CFG_ALT_MEMTEST on systems where address zero isn't
-    writeable
-  - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
-  - trigger watchdog while waiting in serial driver
-
-* Add auto-update code for TRAB board using USB memory sticks,
-  support new configuration with more memory
-
-* disable MPC5200 bus pipelining as workaround for bus contention
-
-* Modify XLB arbiter priorities on MPC5200 so all devices use same
-  priority; configure critical interrupts to be handled like external
-  interrupts
-
-* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
-  go back to 66 MHz for stability
-
-* Patches by Jon Diekema, 15 Sep 2003:
-  - add description for missing CFG_CMD_* entries in the README file
-  - sacsng tweaks
-
-* Patch by Gleb Natapov, 14 Sep 2003:
-  enable watchdog support for all MPC824x boards that have a watchdog
-
-* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
-  "Non-octet Aligned Frame" errors we see at 100 Mbps
-
-* Patch by Sharad Gupta, 14 Sep 2003:
-  fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
-
-* Patch by llandre, 11 Sep 2003:
-  update configuration for PPChameleonEVB board
-
-* Patch by David Müller, 13 Sep 2003:
-  various changes to VCMA9 board specific files
-
-* Add I2C support for MGT5100 / MPC5200
-
-* Patch by Rune Torgersen, 11 Sep 2003:
-  Changed default memory option on MPC8266ADS to NOT be Page Based
-  Interleave, since this doesn't work very well with the standard
-  16MB DIMM
-
-* Patch by George G. Davis, 12 Sep 2003:
-  fix Makefile settings for sk98 driver
-
-* Patch by Stefan Roese, 12 Sep 2003:
-  - new boards added: DP405, HUB405, PLU405, VOH405
-  - some esd boards updated
-  - cpu/ppc4xx/sdram.c: disable memory controller before setting
-    first values
-  - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
-
-* Patch by Martin Krause, 11 Sep 2003:
-  add burn-in tests for TRAB board
-
-* Enable instruction cache on MPC5200 board
-
-* Patch by Denis Peter, 11 Sep 2003:
-  - fix USB data pointer assignment for bulk only transfer.
-  - prevent to display erased directories in FAT filesystem.
-
-* Change output format for NAND flash - make it look like for other
-  memory, too
-
-======================================================================
-Changes for U-Boot 0.4.8:
-======================================================================
-
-* Add I2C and RTC support for RMU board
-
-* Patches by Denis Peter, 9 Sep 2003:
-  add FAT support for IDE, SCSI and USB
-
-* Patches by Gleb Natapov, 2 Sep 2003:
-  - cleanup of POST code for unsupported architectures
-  - MPC824x locks way0 of data cache for use as initial RAM;
-    this patch unlocks it after relocation to RAM and invalidates
-    the locked entries.
-
-* Patch by Gleb Natapov, 30 Aug 2003:
-  new I2C driver for mpc107 bridge. Now works from flash.
-
-* Patch by Dave Ellis, 11 Aug 2003:
-  - JFFS2: fix typo in common/cmd_jffs2.c
-  - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
-  - JFFS2: remove node version 0 warning
-  - JFFS2: accept JFFS2 PADDING nodes
-  - SXNI855T: add AM29LV800 support
-  - SXNI855T: move environment from EEPROM to flash
-  - SXNI855T: boot from JFFS2 in NOR or NAND flash
-
-* Patch by Bill Hargen, 11 Aug 2003:
-  fixes for I2C on MPC8240
-  - fix i2c_write routine
-  - fix iprobe command
-  - eliminates use of global variables, plus dead code, cleanup.
-
-* Add support for USB Mass Storage Devices (BBB)
-  (tested with USB memory sticks only)
-
-* Avoid flicker on TRAB's VFD
-
-* Add support for SK98xx driver
-
-* Add PCI support for SL8245 board
-
-* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
-  or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
-  Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
-
-* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16	 MHz)
-  to allow for more accurate baudrate settings
-  (error now 0.7% at 115 kbps, instead of 3.5% before)
-
-* Patch by Andreas Mohr, 4 Sep 2003:
-  Fix a lot of spelling errors
-
-* Add support for PPChameleon Eval Board
-
-* Add support for P3G4 board
-
-* Fix problem with MGT5100 FEC driver: add "early" MAC address
-  initialization
-
-* Patch by Yuli Barcohen, 7 Aug 2003:
-  check BCSR to detect if the board is configured in PCI mode
-
-======================================================================
-Changes for U-Boot 0.4.7:
-======================================================================
-
-* Patch by Raghu Krishnaprasad, 7 Aug 2003:
-  add support for Adder II MPC852T module
-
-* Patch by George G. Davis, 19 Aug 2003:
-  fix TI Innovator/OMAP1510 pin configs
-
-* Patches by Kshitij, 18 Aug 2003
-  - add support for arm926ejs cpu core
-  - add support for TI OMAP 1610 Innovator Board
-
-* Patch by Yuli Barcohen, 14 Aug 2003:
-  add support for bzip2 uncompression
-
-* Add GCC library to examples/Makefile so GCC utility functions will
-  be resolved, too
-
-* Add I2C and RTC support for RMU board using software I2C driver
-  (because of better response to iprobe command); fix problem with
-  "reset" command
-
-* Patch by Matthias Fuchs, 28 Aug 2003:
-  Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
-  CONFIG_BOOTP_MAKS (see README).
-
-* Fix ICU862 environment problem
-
-* Fix RAM size detection for RMU board
-
-* Implement "reset" for MGT5100/MPC5200 systems
-
-======================================================================
-Changes for U-Boot 0.4.6:
-======================================================================
-
-* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
-  allow selection of clock frequency as "make" target
-
-* Implement memory autosizing code for IceCube boards
-
-* Configure network port on INCA-IP for autonegotiation
-
-* Fix overflow problem in network timeout code
-
-* Patch by Richard Woodruff, 8 Aug 2003:
-  Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
-
-======================================================================
-Changes for U-Boot 0.4.5:
-======================================================================
-
-* Update for TQM board defaults:
-  disable clocks_in_mhz, enable boot count limit
-
-* Removed tools/gdb from "make all" target.  Added make target "gdbtools"
-  in toplevel directory instead.  Removed astest.c from tools/gdb because
-  it is no longer relevant.
-
-* Fix PCI support for MPC5200 / IceCube Board
-
-* Map ISP1362 USB OTG controller for NSCU board
-
-* Patch by Brad Parker, 02 Aug 2003:
-  fix sc520_cdp problems
-
-* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
-
-* Allow erase command to cross flash bank boundaries
-
-* Patch by Scott McNutt, 21 Jul 2003:
-  Add support for LynuxWorks Kernel Downloadable Images (KDIs).
-  Both LynxOS and BlueCat linux KDIs are supported.
-
-* Patch by Richard Woodruff, 25 Jul 2003:
-  use more reliable reset for OMAP/925T
-
-* Patch by Nye Liu, 25 Jul 2003:
-  fix typo in mpc8xx.h
-
-* Patch by Richard Woodruff, 24 Jul 2003:
-  Fixes for cmd_nand.c:
-  - Fixed null dereferece which could result in incorrect ECC values.
-  - Added support for devices with no Ready/Busy signal hooked up.
-  - Added OMAP1510 read/write protect handling.
-  - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
-    for non-JFFS2.
-  - Switched default ECC to be JFFS2.
-
-* Allow crc32 to be used at address 0x000
-
-* Provide consistent interface to standalone applications to access
-  the 'global_data' structure
-  Provide a doc/README.standalone more useful to users/developers.
-
-* Make IceCube MGT5100 FEC driver work
-
-* Implement new mechanism to export U-Boot's functions to standalone
-  applications: instead of using (PPC-specific) system calls we now
-  use a jump table; please see doc/README.standalone for details
-
-* Patch by Dave Westwood, 24 Jul 2003:
-  added support for Unity OS (a proprietary OS)
-
-* Patch by Detlev Zundel, 23 Jul 2003:
-  add "imls" command to print flash table of contents
-
-* Fix cold boot detection for log buffer reset
-
-* Return error for invalid length specifiers with "cp.X" etc.
-
-* Fix startup problem on MIPS
-
-* Allow for CONFIG_SPLASH_SCREEN even when no explicit
-  bitmap support is configured
-
-* Patch by Bill Hargen, 18 Jul 2003:
-  - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
-
-* Patch by Denis Peter, 18 Jul 2003:
-  - fix memory configuration for MIP405T
-  - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
-
-* Cleanup of TQM82xx configurations; use "official" board types
-  to make selection easier.
-
-* Patch by Martin Krause, 17 Jul 2003:
-  add delay to get I2C working with "imm" command and s3c24x0_i2c.c
-
-* Patch by Richard Woodruff, 17 July 03:
-  - Fixed bug in OMAP1510 baud rate divisor settings.
-
-* Patch by Nye Liu, 16 July 2003:
-  MPC860FADS fixes:
-  - add MPC86xADS support (uses MPC86xADS.h)
-  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
-    o PLPRCR changes
-    o BRG changes (EXTAL/XTAL restricted to 10MHz)
-    o don't trust gclk() software measurement by default, depend on
-      CONFIG_8xx_GCLK_FREQ
-  - add DRAM SIMM not installed detection
-  - use more "correct" SDRAM initialization sequence
-  - allow different SDRAM sizes (8xxADS has 8M)
-  - default DER is 0
-  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
-  - rename MAMR/MBMR defines to be more consistent. Should eventually
-    be merged into MxMR to better reflect the PowerQUICC datasheet.
-
-* Patch by Yuli Barcohen, 16 Jul 2003:
-  support new Motorola PQ2FADS-ZU evaluation board which replaced
-  MPC8260ADS and MPC8266ADS
-
-======================================================================
-Changes for U-Boot 0.4.4:
-======================================================================
-
-* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
-
-* Add support for MGT5100 and MPC5200 processors
-
-* Patch by Lutz Dennig, 15 Jul 2003:
-  update for R360MPI board
-
-======================================================================
-Changes for U-Boot 0.4.3:
-======================================================================
-
-* Patches by Kshitij, 04 Jul 2003
-  - added support for arm925t cpu core
-  - added support for TI OMAP 1510 Innovator Board
-
-* Patches by Martin Krause, 14 Jul 2003:
-  - add I2C support for s3c2400 systems (trab board)
-  - (re-) add "ping" to command table
-
-* Fix handling of "slow" POST routines
-
-* Patches by Yuli Barcohen, 13 Jul 2003:
-  - Correct flash and JFFS2 support for MPC8260ADS
-  - fix PVR values and clock generation for PowerQUICC II family
-    (8270/8275/8280)
-
-* Patch by Bernhard Kuhn, 08 Jul 2003:
-  - add support for M68K targets
-
-* Patch by Ken Chou, 3 Jul:
-  - Fix PCI config table for A3000
-  - Fix iobase for natsemi.c
-    (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
-
-* Allow to enable "slow" POST routines by key press on power-on
-* Fix temperature dependend switching of LCD backlight on LWMON
-* Tweak output format for LWMON
-
-* Patch by Stefan Roese, 11 Jul 2003:
-  - Fix bug in CONFIG_VERSION_VARIABLE.
-  - AR405 config updated.
-  - OCRTC/ORSG: bsp command added.
-  - ASH405 bsp update.
-
-======================================================================
-Changes for U-Boot 0.4.2:
-======================================================================
-
-* Add support for NSCU board
-
-* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
-
-* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
-  mirror bit flash on TQM8xxM modules
-
-* Patch by Kenneth Johansson, 30 Jun 2003:
-  get rid of MK_CMD_ENTRY macro; update doc/README.command
-
-* Patch by Seb James, 30 Jun 2003:
-  Improve documentation of I2C configuration in README
-
-* Fix problems with previous log buffer "fixes"
-
-* Fix minor help text issues
-
-* "log append" did not append a newline
-
-======================================================================
-Changes for U-Boot 0.4.1:
-======================================================================
-
-* Fix some missing commands, cleanup header files
-  (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
-
-* Rewrite command lookup and help command (fix problems with bubble
-  sort when sorting command name list). Minor cleanup here and there.
-
-* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
-  - Allow to call sysmon function interactively
-  - PIC on LWMON board needs delay after power-on
-  - Add missing RSR definitions for MPC8xx
-  - Improve log buffer handling: guarantee clean reset after power-on
-  - Add support for EXBITGEN board (aka "genie")
-  - Add support for SL8245 board
-
-* Code cleanup:
-  - remove trailing white space, trailing empty lines, C++ comments, etc.
-  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
-
-* Patches by Kenneth Johansson, 25 Jun 2003:
-  - major rework of command structure
-    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
-
-======================================================================
-Changes for U-Boot 0.4.0:
-======================================================================
-
-* Patches by Robert Schwebel, 26 Jun 2003:
-  - csb226 configuration updated
-  - credits for logodl port updated
-  - innokom configuration updated
-  - logodl tree update, still with coding style inconsistencies
-  - added OCM for ppc405 warning to README
-
-* Patch by Pantelis Antoniou, 25 Jun 2003:
-  update NetVia with V2 board support
-
-* Header file cleanup for ARM
-
-* Patch by Murray Jensen, 24 Jun 2003:
-  - make sure to use only U-boot provided header files
-  - fix problems with ".rodata.str1.4" section as used by GCC-3.x
-
-* Patch by Stefan Roese, 24 Jun 2003:
-  - Update esd ASH405 board files.
-  - Update esd DASA_SIM config file.
-  - Add ping command to some esd boards.
-
-* Patch by Yuli Barcohen, 23 Jun 2003:
-  Update for MPC8260ADS board
-
-* Patch by Murray Jensen, 23 Jun 2003:
-  - cleanup of GCC 3.x compiler warnings
-
-* Patch by Rune Torgersen, 4 Jun 2003:
-  add large memory support for MPC8266ADS board
-
-* Patch by Richard Woodruff, 19 June 03:
-  - Enabled standard u-boot device abstraction for ARM
-  - Enabled console device for ARM
-  - Initilized bi_baudrate for ARM
-
-* Patch by Bill Hargen, 23 Apr 2003:
-  fix byte order for 824x I2C addresses (write op)
-
-* Patch by Murray Jensen, 20 Jun 2003:
-  - hymod update
-  - cleanup (especially for gcc-3.x compilers)
-
-* Patch by Tom Guilliams, 20 Jun 2003:
-  added CONFIG_750FX support for IBM 750FX processors
-
-* Patch by Devin Crumb, 02 Apr 2003:
-  Fix clock divider rounding problem in drivers/serial.c
-
-* Patch by Richard Woodruff, 19 June 03:
-  - Fixed smc91c111 driver to sync with the u-boot environment
-    (driver/smc91c111.c).
-  - Added eth_init error return check in NetLoop (net/net.c).
-
-* Patch by Ken Chou, 19 June 2003:
-  Added support for A3000 SBC board (Artis Microsystems Inc.)
-
-* Patches by Murray Jensen, 17 Jun 2003:
-  - Hymod board database mods: add "who" field and new xilinx chip types
-  - provide new "init_cmd_timeout()" function so code external to
-    "common/main.c" can use the "reset_cmd_timeout()" function before
-    entering the main loop
-  - add DTT support for adm1021 (new file dtt/adm1021.c; config
-    slightly different. see include/configs/hymod.h for an example
-    (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
-    CFG_DTT_ADM1021 defined)
-  - add new "eeprom_probe()" function which has similar args and
-    behaves in a similar way to "eeprom_read()" etc.
-  - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
-    function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
-  - gdbtools copyright update
-  - ensure that set_msr() executes the "sync" and "isync" instructions
-    after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
-  - 8260 I/O ports fix: Open Drain should be set last when configuring
-  - add SIU IRQ defines for 8260
-  - allow LDSCRIPT override and OBJCFLAGS initialization: change to
-    config.mk to allow board configurations to override the GNU
-    linker script, selected via the LDSCRIPT, make variable, and to
-    give an initial value to the OBJCFLAGS make variable
-  - 8260 i2c enhancement:
-    o correctly extends the timeout depending on the size of all
-      queued messages for both transmit and receive
-    o will not continue with receive if transmit times out
-    o ensures that the error callback is done for all queued tx
-      and rx messages
-    o correctly detects both tx and rx timeouts, only delivers one to
-      the callback, and does not overwrite an earlier error
-    o logic in i2c_probe now correct
-  - add "vprintf()" function so that "panic()" function can be
-    technically correct
-  - many Hymod board changes
-
-* Patches by Robert Schwebel, 14 Jun 2003:
-  - add support for Logotronic DL datalogger board
-  - cleanup serial line after kermit binary download
-  - add debugX macro (debug level support)
-  - update mach-types.h to latest arm.linux.org.uk master list.
-
-* Patches by David Müller, 12 Jun 2003:
-  - rewrite of the S3C24X0 register definitions stuff
-  - "driver" for the built-in S3C24X0 RTC
-
-* Patches by Yuli Barcohen, 12 Jun 2003:
-  - Add MII support and Ethernet PHY initialization for MPC8260ADS board
-  - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
-    configuration word supplied by FPGA on some MPC8260ADS boards
-
-* Patch by Pantelis Antoniou, 10 Jun 2003:
-  Unify status LED interface
-
-* Add support for DS12887 RTC; add RTC support for ATC board
-
-* Patch by Nicolas Lacressonniere, 11 Jun 2003:
-  Modifications for Atmel AT91RM9200DK ARM920T based development kit
-  - Add Atmel DataFlash support for reading and writing.
-  - Add possibility to boot a Linux from DataFlash with BOOTM command.
-  - Add Flash detection on Atmel AT91RM9200DK
-    (between Atmel AT49BV1614 and AT49BV1614A flashes)
-  - Replace old Ethernet PHY layer functions
-  - Change link address
-
-* Patch by Frank Smith, 9 Jun 2003:
-  use CRIT_EXCEPTION for machine check on 4xx
-
-* Patch by Detlev Zundel, 13 Jun 2003:
-  added implementation of the "carinfo" command in cmd_immap.c
-
-* Fix CONFIG_NET_MULTI support in include/net.h
-
-* Patches by Kyle Harris, 13 Mar 2003:
-  - Add FAT partition support
-  - Add command support for FAT
-  - Add command support for MMC
-  ----
-  - Add Intel PXA support for video
-  - Add Intel PXA support for MMC
-  ----
-  - Enable MMC and FAT for lubbock board
-  - Other misc changes for lubbock board
-
-* Patch by Robert Schwebel, April 02, 2003:
-  fix for SMSC91111 driver
-
-* Patch by Vladimir Gurevich, 04 Jun 2003:
-  make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
-
-* Patch by Stefan Roese, 05 Jun 2003:
-  - PPC4xx: Fix bug for initial stack in data cache as pointed out by
-    Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
-    data cache can be used even if the chip select is in use.
-  - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
-    (see README for further description).
-  - Changed config files of CONFIG_EEPRO100 boards to use the
-    CFG_RX_ETH_BUFFER define.
-
-* Add support for RMU board
-
-* Add support for TQM862L at 100/50 MHz
-
-* Patch by Pantelis Antoniou, 02 Jun 2003:
-  major reconstruction of networking code;
-  add "ping" support (outgoing only!)
-
-* Patch by Denis Peter, 04 June 2003:
-  add support for the MIP405T board
-
-* Patches by Udi Finkelstein, 2 June 2003:
-  - Added support for custom keyboards, initialized by defining a
-    board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
-  - Added support for the RBC823 board.
-  - cpu/mpc8xx/lcd.c now automatically calculates the
-    Horizontal Pixel Count field.
-
-* Fix alignment problem in BOOTP (dhcp_leasetime option)
-  [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
-
-* Patch by Mark Rakes, 14 May 2003:
-  add support for Intel e1000 gig cards.
-
-* Patch by Nye Liu, 3 Jun 2003:
-  fix critical typo in MAMR definition (include/mpc8xx.h)
-
-* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
-
-* Patch by Klaus Heydeck, 2 Jun 2003
-  Minor changes for KUP4K configuration
-
-* Patch by Marc Singer, 29 May 2003:
-  Fixed rarp boot method for IA32 and other little-endian CPUs.
-
-* Patch by Marc Singer, 28 May 2003:
-  Added port I/O commands.
-
-* Patch by Matthew McClintock, 28 May 2003
-  - cpu/mpc824x/start.S: fix relocation code when booting from RAM
-  - minor patches for utx8245
-
-* Patch by Daniel Engström, 28 May 2003:
-  x86 update
-
-* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
-  add nand flash support to SXNI855T configuration
-  fix/extend nand flash support:
-  - fix 'nand erase' command so does not erase bad blocks
-  - fix 'nand write' command so does not write to bad blocks
-  - fix nand_probe() so handles no flash detected properly
-  - add doc/README.nand
-  - add .jffs2 and .oob options to nand read/write
-  - add 'nand bad' command to list bad blocks
-  - add 'clean' option to 'nand erase' to write JFFS2 clean markers
-  - make NAND read/write faster
-
-* Patch by Rune Torgersen, 23 May 2003:
-  Update for MPC8266ADS board
-
-* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
-  instead CFG_MONITOR_LEN is now only used to determine	 _at_compile_
-  _time_  (!) if the environment is embedded within the U-Boot image,
-  or in a separate flash sector.
-
-* Cleanup CFG_DER #defines in config files (wd maintained only)
-
-* Fix data abort exception handling for arm920t CPU
-
-* Fix alignment problems with flash driver for TRAB board
-
-* Patch by Donald White, 21 May 2003:
-  fix calculation of base address in pci_hose_config_device()
-
-* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
-  execute "cmd2", even if "cmd1" fails. Note that this is different
-  to "run var1 var2" where the contents of "var2" will NOT be
-  executed when a command in "var1" fails.
-
-* Add zero-copy ramdisk support (requires corresponding kernel support!)
-
-* Patch by Kyle Harris, 20 May 2003:
-  In preparation for an ixp port, rename cpu/xscale and arch-xscale
-  into cpu/pxa and arch-pxa.
-
-* Patch by Stefan Roese, 23 May 2003:
-  - IBM PPC405EP port added.
-  - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
-    UART0) is used as default U-Boot console. PPC4xx only!
-  - esd ASH405 board added (PPC405EP based).
-  - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
-  - esd CPCI405AB board added.
-  - esd PMC405 board added.
-  - Update of some esd boards.
-
-* Patch by Denis Peter, 19 Mai 2003:
-  add support for the MIP405-3 board
-
-* Patch by Dave Ellis, 22 May 2003:
-  Fix problem with only partially cleared .bss segment
-
-* Patch by Rune Torgersen, 12 May 2003:
-  get PCI to work on a MPC8266ADS board; incorporate change to
-  cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
-
-* Patch by Nye Liu, 1 May 2003:
-  minor patches for the FADS8xx
-
-* Patch by Thomas Schäfer, 28 Apr 2003:
-  Fix SPD handling for 256 ECC DIMM on Walnut
-
-* Add support for arbitrary bitmaps for TRAB's	VFD command;
-  allow to pass boot bitmap addresses in environment variables;
-  allow for zero boot delay
-
-* Patch by Christian Geißinger, 19 May 2002:
-  On TRAB: wait until the dummy byte has been completely sent
-
-* Patch by David Updegraff, 22 Apr 2003:
-  update for CrayL1 board
-
-* Patch by Pantelis Antoniou, 21 Apr 2003:
-  add boot support for ARTOS (a proprietary OS)
-
-* Patch by Steven Scholz, 11 Apr 2003:
-  Add support for RTC DS1338
-
-* Patch by Rod Boyce, 24 Jan 2003:
-  Fix counting of extended partitions in diskboot command
-
-* Patch by Christophe Lindheimer, 20 May 2003:
-  allow the use of CFG_LOADS when CFG_NO_FLASH is set
-
-* Fix SDRAM timing on Purple board
-
-* Add support for CompactFlash on ATC board
-  (includes support for Intel 82365 and compatible PC Card controllers,
-  and Yenta-compatible PCI-to-CardBus controllers)
-
-* Patch by Mathijs Haarman, 08 May 2003:
-  Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
-
-* Fix problem with usage of "true" (undefined in current versions of bfd.h)
-
-* Add support for Promess ATC board
-
-* Patch by Keith Outwater, 28 Apr 2003:
-  - Miscellaneous corrections and additions to GEN860T board specific code.
-  - Added GEN860_SC variant to GEN860T.
-  - Miscellaneous corrections to GEN860T documentation.
-  - Correct duplicate entry in U-Boot CREDITS file.
-  - Add GEN860T_SC entry in MAINTAINERS file.
-  - Update CREDITS file with GEN860T_SC info.
-
-* Update Smiths Aerospace addresses in MAINTAINERS file
-
-* Fix error handling in hush's version of "run" command
-
-* LWMON extensions:
-  - Splashscreen support
-  - modem support
-  - sysmon support
-  - temperature dependend enabling of LCD
-
-* Allow booting from old "PPCBoot" disk partitions
-
-* Add support for TQM8255 Board / MPC8255 CPU
-
-======================================================================
-Changes for U-Boot 0.3.1:
-======================================================================
-
-* Make sure Block Lock Bits get cleared in R360MPI flash driver
-
-* MPC823 LCD driver: Fill color map backwards, to allow for steady
-  display when Linux takes over
-
-* Patch by Erwin Rol, 27 Feb 2003:
-  Add support for RTEMS (this time for real).
-
-* Add support for "bmp info" and "bmp display" commands to load
-  bitmap images; this can be used (for example in a "preboot"
-  command) to display a splash screen very quickly after poweron.
-
-* Add support for 133 MHz clock on INCA-IP board
-
-* Patch by Lutz Dennig, 10 Apr 2003:
-  Update for R360MPI board
-
-* Add new meaning to "autostart" environment variable:
-  If set to "no", a standalone image passed to the
-  "bootm" command will be copied to the load address
-  (and eventually uncompressed), but NOT be started.
-  This can be used to load and uncompress arbitrary
-  data.
-
-* Patch by Stefan Roese, 10 Apr 2003:
-  Changed DHCP client to use IP address from server option field #54
-  from the OFFER packet in the server option field #54 in the REQUEST
-  packet. This fixes a problem using a Windows 2000 DHCP server,
-  where the DHCP-server is not the TFTP-server.
-
-* Set max brightness for MN11236 displays on TRAB board
-
-* Add support for TQM862L modules
-
-======================================================================
-Changes for U-Boot 0.3.0:
-======================================================================
-
-* Patch by Arun Dharankar, 4 Apr 2003:
-  Add IDMA example code (tested on 8260 only)
-
-* Add support for Purple Board (MIPS64 5Kc)
-
-* Add support for MIPS64 5Kc CPUs
-
-* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
-
-* Patch by Denis Peter, 04 Apr 2003:
-  - update MIP405-4 board
-
-* Patch by Stefan Roese, 4 Apr 2003:
-  - U-Boot version environment variable "ver" added
-    (CONFIG_VERSION_VARIABLE).
-  - Changed PPC405GPr version from A to B.
-  - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
-
-* Patches by Denis Peter, 03 April 2003:
-  - fix PCI IRQs on MPL boards
-  - fix two more un-relocated pointer problems
-
-* Fix behaviour of "run" command:
-  - print error message iv variable does not exist
-  - terminate processing of arguments in case of error
-
-* Patches by Peter Figuli, 10 Mar 2003
-  - Add support for BTUART on PXA platform
-  - Add support for WEP EP250 (PXA) board
-
-* Fix flash problems on INCA-IP; add tool to allow bruning images  to
-  flash using a BDI2000
-
-* Implement fix for I2C Edge Conditions problem for all boards that
-  use the bit-banging driver (common/soft_i2c.c)
-
-* Patch by Martin Winistoerfer, 23 Mar 2003
-  - Add port to MPC555/556 microcontrollers
-  - Add support for cmi customer board with
-    Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
-
-* Patch by Rick Bronson, 28 Mar 2003:
-  - fix common/cmd_nand.c
-
-* Patch by Arun Dharankar, 24 Mar 2003:
-  - add threads / scheduler example code
-
-* Add patches by Robert Schwebel, 31 Mar 2003:
-  - add ctrl-c support for kermit download
-  - align bdinfo output on ARM
-  - csb226 board: bring in sync with innokom/memsetup.S
-  - csb226 board: fix MDREFR handling
-  - misc doc fixes / extensions
-  - innokom board: cleanup, MDREFR fix in memsetup.S, config update
-  - add BOOT_PROGRESS to armlinux.c
-
-* Add CPU ID, version, and clock speed for INCA-IP
-
-* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
-  - fix SRAM and SDRAM memory sizing
-  - add status LED support
-  - add MAC address for second (SCC1) ethernet port
-
-* Update default environment for TQM8260 board
-
-* Patch by Rick Bronson, 16 Mar 2003:
-  - Add NAND flash support for reading, writing, and erasing NAND
-    flash (certain forms of which are called SmartMedia).
-  - Add support for Atmel AT91RM9200DK ARM920T based development kit.
-
-* Patches by Robert Schwebel, 19 Mar 2003:
-  - use arm-linux-gcc as default compiler for ARM
-  - fix i2c fixup code
-  - fix missing baudrate setting
-  - added $loadaddr / CFG_LOAD_ADDR support to loadb
-  - moved "ignoring trailing characters" _before_ u-boot wants to
-    print out diagnostics messages; removes bogus characters at the
-    end of transmission
-
-* Patch by John Zhan, 18 Mar 2003:
-  Add support for SinoVee Microsystems SC8xx boards
-
-* Patch by Rolf Offermanns, 21 Mar 2003:
-  ported the dnp1110 related changes from the current armboot cvs to
-  current u-boot cvs. smc91111 does not work. problem marked in
-  smc91111.c, grep for "FIXME".
-
-* Patch by Brian Auld, 25 Mar 2003:
-  Add support for STM flash chips on ebony board
-
-* Add PCI support for MPC8250 Boards (PM825 module)
-
-* Patch by Stefan Roese, 25 Mar 2003:
-  - PCI405 update.
-
-* Patch by Stefan Roese, 20 Mar 2003:
-  - CPCI4052 update (support for revision 3).
-  - Set edge conditioning circuitry on PPC405GPr for compatibility
-    to existing PPC405GP designs.
-  - Clip udiv to 5 bits on PPC405 (serial.c).
-
-* Extend INCAIP board support:
-  - add automatic RAM size detection
-  - add "bdinfo" command
-  - pass flash address and size to Linux kernel
-  - switch to 150 MHz clock
-
-* Avoid flicker on the TRAB's VFD by synchronizing the enable with
-  the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
-  boards, version 153 for Rev. 200 boards).
-
-* Patch by Vladimir Gurevich, 12 Mar 2003:
-  Fix relocation problem of statically initialized string pointers
-  in common/cmd_pci.c
-
-* Patch by Kai-Uwe Blöm, 12 Mar 2003:
-  Cleanup & bug fixes for JFFS2 code:
-  - the memory mangement was broken. It caused havoc on malloc by
-    writing beyond the block boundaries.
-  - the length calculation for files was wrong, sometimes resulting
-    in short file reads.
-  - data copying now optionally takes fragment version numbers into
-    account, to avoid copying from older data.
-  See doc/README.JFFS2 for details.
-
-* Patch by Josef Wagner, 12 Mar 2003:
-  - 16/32 MB and 50/80 MHz support with auto-detection for IP860
-  - ETH05 and BEDBUG support for CU824
-  - added support for MicroSys CPC45
-  - new BOOTROM/FLASH0 and DOC base for PM826
-
-* Patch by Robert Schwebel, 12 Mar 2003:
-  Fix the chpart command on innokom board
-
-* Name cleanup:
-  mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
-  s/PPCBoot/U-Boot/ in some files
-  s/pImage/uImage/  in some files
-
-* Patch by Detlev Zundel, 15 Jan 2003:
-  Fix '' command line quoting
-
-* Patch by The LEOX team, 19 Jan 2003:
-  - add support for the ELPT860 board
-  - add support for Dallas ds164x RTC
-
-* Patches by David Müller, 31 Jan 2003:
-  - minimal setup for CardBus bridges
-  - add EEPROM read/write support in the CS8900 driver
-  - add support for the builtin I2C controller in the Samsung s3c24x0 chips
-  - add support for MPL's VCMA9 (Samsung s3c2410 based) board
-
-* Patch by Steven Scholz, 04 Feb 2003:
-  add support for RTC DS1307
-
-* Patch by Reinhard Meyer, 5 Feb 2003:
-  fix PLPRCR/SCCR init sequence on 8xx to allow for
-  changes of EBDF by software
-
-* Patch by Vladimir Gurevich, 07 Feb 2003:
-  "API-compatibility patch" for 4xx I2C driver
-
-* TRAB fixes / extensions:
-  - Restore VFD brightness as saved in environment
-  - add support for Fujitsu flashes
-  - make sure both buzzers are turned off (drive low level)
-
-* Patches by Robert Schwebel, 06 Mar 2003:
-  - fix bug in BOOTP code (must use NetCopyIP)
-  - update of CSB226 port
-  - clear BSS segment on XScale
-  - added support for i2c_init_board() function
-  - update to the Innokom plattform
-
-* Extend support for redundand environments for configurations where
-  environment size < sector size
-
-* Patch by Rune Torgersen, 13 Feb 2003:
-  Add support for Motorola MPC8266ADS board
-
-* Patch by Kyle Harris, 19 Feb 2003:
-  patches for the Intel lubbock board:
-  memsetup.S - general cleanup (based on Robert's csb226 code)
-  flash.c - overhaul, actually works now
-  lubbock.c - fix init funcs to return proper value
-
-* Patch by Kenneth Johansson, 26 Feb 2003:
-  - Fixed off by one in RFTA calculation.
-  - No need to abort when LDF is lower than we can program it's only
-    minimum timing so clamp it to what we can do.
-  - Takes function pointer to function for reading the spd_nvram. Usefull
-    for faking data or hardcode a module without the nvram.
-  - fix other user for above change
-  - fix some comments.
-
-* Patches by Brian Waite, 26 Feb 2003:
-  - fix port for evb64260 board
-  - fix PCI for evb64260 board
-  - fix PCI scan
-
-* Patch by Reinhard Meyer, 1 Mar 2003:
-  Add support for EMK TOP860 Module
-
-* Patch by Yuli Barcohen, 02 Mar 2003:
-  Add SPD EEPROM support for MPC8260ADS board
-
-* Patch by Robert Schwebel, 21 Jan 2003:
-  - Add support for Innokom board
-  - Don't complain if "install" fails
-  - README cleanup (remove duplicated lines)
-  - Update PXA header files
-
-* Add documentation for existing POST code (doc/README.POST)
-
-* Patch by Laudney Ren, 15 Jan 2003:
-  Fix handling of redundand environment in "tools/envcrc.c"
-
-* Patch by Detlev Zundel, 28 Feb 2003:
-  Add bedbug support for 824x systems
-
-* Add support for 16 MB flash configuration of TRAB board
-
-* Patch by Erwin Rol, 27 Feb 2003:
-  Add support for RTEMS
-
-* Add image information to README
-
-* Patch by Stefan Roese, 18 Feb 2003:
-  CPCIISER4 configuration updated.
-
-* Patch by Stefan Roese, 17 Feb 2003:
-  Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
-
-* Patch by Stefan Roese, 13 Feb 2003:
-  Add "pcidelay" environment variable (in ms, enabled via
-  CONFIG_PCI_BOOTDELAY).
-  PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
-  RST# to respond to configuration cycles (33MHz -> 1s).
-
-* Fix dual PCMCIA slot support (when running with just one
-  slot populated)
-
-* Add VFD type detection to trab board
-
-* extend drivers/cs8900.c driver to synchronize	 ethaddr  environment
-  variable with value in the EEPROM
-
-* Patch by Stefan Roese, 10 Feb 2003:
-  Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
-
-* Add support for MIPS32 4Kc CPUs
-
-* Add support for INCA-IP Board
-
-======================================================================
-Changes for U-Boot 0.2.2:
-======================================================================
-
-* Add dual ethernet support on PM826
-
-* Add support for LXT971 PHY on PM826
-
-* Patch by Tord Andersson, 16 Jan 2003:
-  Fix flash sector count for TQM8xxL
-
-* Fix I2C EEPROM problem on ICU862 board (would only write the first
-  16 bytes out of each 32 byte block)
-
-======================================================================
-Changes for U-Boot 0.2.1:
-======================================================================
-
-* Add support for V37 board
-  (patch by Jón Benediktsson, 11 Dec 2002)
-
-* Update baudrate in bd_info when it gets changed
-
-* Add watchdog trigger points while waiting for serial port
-  (so far only 8xx -- needed on LWMON with 100ms watchdog)
-
-* Improve command line tool to access the U-Boot's environment
-  (figuration of the utility, using a config file)
-
-* Add single quote support for (old) command line parser
-
-* Switch LWMON board default config from FRAM to EEPROM;
-  in POST, EEPROM shows up on 8 addresses
-
-======================================================================
-Changes for U-Boot 0.2.0:
-======================================================================
-
-* Use 1-byte-read instead of -write for iprobe() function
-  Add i2c commands to PM826 config
-
-* extend I2C POST code: check for list on known addresses
-
-* Improve log buffer code; use "loglevel" to decide which messages
-  to log on the console, too (like in Linux); get rid of "logstart"
-
-* Add command line tool to access the U-Boot's environment
-  (board-specific for TRAB now, to be fixed later)
-
-* Patch by Hans-Joerg Frieden, 06 Dec 2002
-  Fix misc problems with AmigaOne support
-
-* Patch by Chris Hallinan, 3 Dec 2002:
-  minor cleanup to the MPC8245 EPIC driver
-
-* Patch by Pierre Aubert , 28 Nov 2002
-  Add support for external (SIU) interrupts on MPC8xx
-
-* Patch by Pierre Aubert , 28 Nov 2002
-  Fix nested syscalls bug in standalone applications
-
-* Patch by David Müller, 27 Nov 2002:
-  fix output of "pciinfo" command for CardBus bridge devices.
-
-* Fix bug in TQM8260 board detection - boards got stuck when board ID
-  was not readable
-
-* Add LED indication for IDE activity on KUP4K board
-
-* Fix startup problems with VFD display on TRAB
-
-* Patch by Pierre Aubert, 20 Nov 2002
-  Add driver for Epson SED13806 graphic controller.
-  Add support for BMP logos in cfb_console driver.
-
-* Added support for both PCMCIA slots (at the same time!) on MPC8xx
-
-* Patch by Rod Boyce, 21 Nov 2002:
-  fix PCMCIA on MBX8xx board
-
-* Patch by Pierre Aubert , 21 Nov 2002
-  Add CFG_CPM_POST_WORD_ADDR to make the offset of the
-  bootmode word in DPRAM configurable
-
-* Patch by Daniel Engström, 18 Nov 2002:
-  Fixes for x86 port (mostly strings issues)
-
-* Patch by Ken Chou, 18 Nov 2002:
-  Fix for natsemi NIC cards (DP83815)
-
-* Patch by Pierre Aubert, 19 Nov 2002:
-  fix a bug for the MII configuration, and some warnings
-
-* Patch by Thomas Frieden, 13 Nov 2002:
-  Add code for AmigaOne board
-  (preliminary merge to U-Boot, still WIP)
-
-* Patch by Jon Diekema, 12 Nov 2002:
-  - Adding URL for IEEE OUI lookup
-  - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
-    being defined.
-  - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
-    root-on-nfs macros are designed to switch how the default boot
-    method gets defined.
-
-* Patch by Daniel Engström, 13 Nov 2002:
-  Add support for i386 architecture and AMD SC520 board
-
-* Patch by Pierre Aubert, 12 Nov 2002:
-  Add support for DOS filesystem and booting from DOS floppy disk
-
-* Patch by Jim Sandoz, 07 Nov 2002:
-  Increase number of network RX buffers (PKTBUFSRX in
-  "include/net.h") for EEPRO100 based boards (especially SP8240)
-  which showed "Receiver is not ready" errors when U-Boot was
-  processing the receive buffers slower than the network controller
-  was filling them.
-
-* Patch by Andreas Oberritter, 09 Nov 2002:
-  Change behaviour of NetLoop(): return -1 for errors, filesize
-  otherwise; return code 0 is valid an means no file loaded - in this
-  case the environment still gets updated!
-
-* Patches by Jon Diekema, 9 Nov 2002:
-  - improve ADC/DAC clocking on the SACSng board to align
-    the failing edges of LRCLK and SCLK
-  - sbc8260 configuration tweaks
-  - add status LED support for 82xx systems
-  - wire sspi/sspo commands into command handler; improved error
-    handlering
-  - add timestamp support and alternate memory test to the
-    SACSng configuration
-
-* Patch by Vince Husovsky, 7 Nov 2002:
-  Add "-n" to linker options to get rid of "Not enough room for
-  program headers" problem
-
-* Patch by David Müller, 05 Nov 2002
-  Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
-  so we can use an already existing name
-
-* Patch by Pierre Aubert, 05 Nov 2002
-  Hardware relatied improvments in FDC boot code
-
-* Patch by Holger Schurig, 5 Nov 2002:
-  Make the PXA really change it's frequency
-
-* Patch by Pierre Aubert, 05 Nov 2002
-  Add support for slave serial Spartan 2 FPGAs
-
-* Fix uninitialized memory (MAC	 address)  in  8xx  SCC/FEC  ethernet
-  drivers
-
-* Add support for log buffer which can be passed to Linux kernel's
-  syslog mechanism; used especially for POST results.
-
-* Patch by Klaus Heydeck, 31 Oct 2002:
-  Add initial support for kup4k board
-
-* Patch by Robert Schwebel, 04 Nov 2002:
-  - use watchdog to reset PXA250 systems
-  - added progress callbacks to (some of the) ARM code
-  - update for Cogent CSB226 board
-
-* Add support for FPS860 board
-
-* Patch by Guillaume Alexandre,, 04 Nov 2002:
-  Improve PCI access on 32-bits Compact PCI bus
-
-* Fix mdelay() on TRAB - this was still the debugging version with
-  seconds instead of ms.
-
-* Patch by Robert Schwebel, 1 Nov 2002:
-  XScale related cleanup (affects all ARM boards)
-
-* Cleanup of names and README.
-
-======================================================================
-Notes for U-Boot 0.1.0:
-======================================================================
-
-This is the initial version of "Das U-Boot", the Universal Boot Loader.
-
-It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
-For information about the history of the project please see the
-PPCBoot project page at http://sourceforge.net/projects/ppcboot
-
-======================================================================
+    Initial support for MPC8641 HPCN board.
diff --git a/CHANGELOG-before-U-Boot-1.1.5 b/CHANGELOG-before-U-Boot-1.1.5
new file mode 100644
index 0000000..727a7b6
--- /dev/null
+++ b/CHANGELOG-before-U-Boot-1.1.5
@@ -0,0 +1,5593 @@
+======================================================================
+Changes for U-Boot 1.1.5:
+======================================================================
+
+* Cleanup compile warnings. Prepare for release 1.1.5
+
+* Fix compile problem in include/configs/ep82xxm.h
+  (must have never been tested before!)
+
+* MCC200: Fix uninitialized variable problem in LCD driver
+
+* Add board/cpu specific NAND chip select function to 440 NDFC
+  Based on idea and implementation from Jeff Mann
+  Patch by Stefan Roese, 20 Oct 2006
+
+* Make 4xx bootup message shorter on 440EPx/GRx platforms
+  Patch by Stefan Roese, 18 Oct 2006
+
+* Add (preliminary) support for V38B board
+
+* PPC405EP: Add support for board configuration of CPC0_PCI register
+  This is needed to be able to configure PerWE*/PCI_INT* pin as PerWE*
+  Patch by Tolunay Orkun, 07 Apr 2006
+
+* PPC405EP: Add CFG_GPIO0_OR, CFG_GPIO0_ODR to setup GPIO completely.
+  - Add configuration of Open Drain GPIO Output selection
+  - Add configuration of initial value of GPIO output pins
+  Patch by Tolunay Orkun, 07 Apr 2006
+
+* Fix spelling; minor code cleanup.
+
+* Fix JFFS2 compilation problem
+  Patch by Stefan Roese, 12 Oct 2006
+
+* Cleanup of NAND update patch (remove changelog from cmd_nand.c)
+  Patch by Guido Classen, 10 Oct 2006
+
+* Several improvements to the new NAND subsystem:
+  - JFFS2 related commands implemented in mtd-utils style
+  - Support for bad blocks
+  - Bad block testing commands
+  - NAND lock commands
+  Please take a look at doc/README.nand for more details
+  Patch by Guido Classen, 10 Oct 2006
+
+* Define IH_CPU_AVR32
+  Make it possible to generate AVR32 uImage files with mkimage and
+  make cmd_bootm recognize them.
+  Patch by Haavard Skinnemoen, 22 Sep 2006
+
+* Fix buffer overflow problem in ft_build.c
+  Patch by Fredrik Roubert, 09 Oct 2006
+
+* Make bootp implementation RFC3046 compliant
+  Patch by Joakim Larsson, 27 Jun 2006
+
+* TQM5200: perform POST memory test only on STK52xx carrier board.
+  (and then only if PSC6_3 is read as "1" when booting).
+  Patch by Martin Krause, 21 Jun 2006
+
+* Move "ar" flags to config.mk to allow for silent "make -s"
+  Based on patch by Mike Frysinger, 20 Jun 2006
+
+* Coding style cleanup
+
+* Add support for EP82xxM boards
+  Patch by Aaron Sells, 20 Jun 2006
+
+* Fix comments in include/ppc440.h
+  Patch by Martin Hicks, 16 Jun 2006
+
+* Update for CAM5200 board:
+  - Map in a additional chip selects CS4 and CS5.
+  - Modify the port configration, configure six UARTs and no PCI,
+    ATA and USB.
+  - Add custom flash driver to handle specific byte swapping
+
+* Fix TLB setup for Ocotea board
+  Patch by Stefan Roese, 30 Sep 2006
+
+* Fix reset problem in sequoia sdram init code
+  Patch by Stefan Roese, 23 Sep 2006
+
+* Disable autoboot abort for FO300 when silent mode is enabled
+  (according to S1 switch setting).
+
+* Cleanup examples binaries
+
+* Add support for AMCC Rainier PPX440GRx eval board
+  Patch by Stefan Roese, 13 Sep 2006
+
+* Add NAND environment support for PPC440EPx Sequoia NAND boot config
+  Patch by Stefan Roese, 12 Sep 2006
+
+* Update NAND boot documentation
+  Patch by Stefan Roese, 12 Sep 2006
+
+* Fix alignment problem in "mtdparts" command
+
+* Add documentation on the latest build environment extensions to
+  the README file.
+
+* Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory.
+
+* Fix LOG_DIR directory creation error.
+  Add support for automatic creation of BUILD_DIR directory.
+
+* Fix build problem cpu/ppc4xx/ndfc.c
+  Patch by Stefan Roese, 07 Sep 2006
+
+* Fix build problem with CPCI440
+  Patch by Stefan Roese, 07 Sep 2006
+
+* Change Yellowstone to use CFI write buffer
+  Patch by Stefan Roese, 07 Sep 2006
+
+* Add support for AMCC Sequoia PPC440EPx eval board
+  - Add support for PPC440EPx & PPC440GRx
+  - Add support for PPC440EP(x)/GR(x) NAND controller
+    in cpu/ppc4xx directory
+  - Add NAND boot functionality for Sequoia board,
+    please see doc/README.nand-boot-ppc440 for details
+  - This Sequoia NAND image doesn't support environment
+    in NAND for now. This will be added in a short while.
+  Patch by Stefan Roese, 07 Sep 2006
+
+* Fix mkimage -l bug with multifile images on 64bit platforms
+  Patch by David Updegraff, 06 Sep 2006
+
+* Fix build problems on sorcery board.
+
+* Fix coldfire build problems.
+  Patch by Marian Balakowicz, 01 Sep 2006
+
+* Add support for a saving build objects in a separate directory.
+  Modifications are based on the Linux kernel approach and support
+  two use cases:
+  1) Add O= to the make command line 'make O=/tmp/build all'
+  2) Set environement variable BUILD_DIR to point to the desired location
+	'export BUILD_DIR=/tmp/build'
+	'make'
+  The second approach can also be used with a MAKEALL script
+	'export BUILD_DIR=/tmp/build'
+	'./MAKEALL'
+  Command line 'O=' setting overrides the BUILD_DIR environent variable.
+  When none of the above methods is used the local build is performed
+  and the object files are placed in the source directory.
+
+* Remove the board/netstar/crcit binary from git repository.
+
+* Fix tools/updater build error.
+
+* Fix tools/easylogo build error.
+
+* Fixed problems on PRS200 board caused by adding splash screen on MCC200
+
+* Extended README entry on coding style
+
+* Added another example showing simple interrupt interception.
+
+* Added simple_strtoul(), getenv() and setenv() to the exported functions.
+  Also bumped up ABI version to reflect this change.
+
+* Added interrupt handling capabilities for mpc5xxx processors.
+  Also added Linux like BUG() macros.
+
+* Coding Style cleanup.
+  Patch by Stefano Babic, 31 Aug 2006
+
+* Add splashscreen support for MCC200 board.
+
+* Make the serial driver framework work with CONFIG_SERIAL_MULTI
+  enabled
+
+* PCIe endpoint support for AMCC Yucca 440SPe board
+  Patch by Tirumala R Marri, 26 Aug 2006
+
+* Improve DIMM detection for AMCC Yucca 440SPe board
+  Improved the memory DIMM detection for the Yucca 440SPe board for
+  the case where a memory DIMM is falsely detected as present.
+  This issue is seen on some AMCC Yucca 440SPe validation boards if
+  only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is
+  populated and DIMM slot 1 is empty.  In this case, U-Boot does
+  not correctly detect that there is only one DIMM memory module
+  installed and will falsely detect two DIMM memory modules are
+  present and therefore U-Boot will not calculate the correct amount
+  of total memory and u-boot will not booting up.
+  Patch by Adam Graham, 24 Aug 2006
+
+* Fix typo.
+
+* Code cleanup
+
+* Update for MCC200 / PRS200 boards:
+  - auto-adjust console device for Linux.
+  - fix typos.
+
+* Add a fix for a buggy USB device on the FO300 board.
+
+* Updates for MCC200 / PRS200 boards:
+  - support for configurations with SDRAM or DDR memory,
+  - support for highboot and lowboot
+  - adjusting environment definitions
+
+* Add support for WTK FO300 board (TQM5200 based).
+
+* Fix TQM834x hang.
+
+* Update for SC520 board.
+  Patch by David Updegraff, 02 Dec 2005
+
+* Fixed common.h spelling error.
+  Patch by Cory Tusar, 30 Nov 2005
+
+* Fix typo.
+  Patch by Andreas Engel, 28 Nov 2005
+
+* Fix fatload command on FAT32 formatted partitions.
+  Patch by Joachim Jaeger, 18 Nov 2005
+
+* Fix drivers/dm9000.c when configured in 32 bit mode.
+  Patch by Eric Benard, 17 Nov 2005
+
+* Cleanup debug code for yucca board.
+
+* MCC200: restrict addressable flash space to 32 MB
+
+* Add debug console on COM12 for MCC200 board
+
+* Fix control-c handing in CONFIG_CMDLINE_EDITING
+  Properly pass break code back from readline.
+  Patch by Roger Blofeld, 31 Jul 2006
+
+* Add commandline history support to all AMCC eval boards
+  Patch by Stefan Roese, 07 Aug 2006
+
+* Add Macronix MXLV320T flash support for AMCC Bamboo
+  Patch by Stefan Roese, 07 Aug 2006
+
+* Change "mii info" to not print an error upon missing PHY at address
+  Patch by Stefan Roese, 07 Aug 2006
+
+* Fix PCI-Express on PPC440SPe rev. A.
+
+* Fix preboot message on TQM85xx after switching to hush parser.
+
+* Adapt TQM85xx ramdisk address to Linux kernel memory map
+
+* Add initial support for PCI-Express on PPC440SPe (Yucca board).
+
+* Fix compiler warning for TRAB board.
+  Patch by Martin Krause, 07 Aug 2006
+
+* Prevent USB commands from working when USB is stopped.
+
+* Add rudimentary handling of alternate settings of USB interfaces.
+  This is in order to fix issues with some USB sticks timing out
+  during initialization. Some code readability improvements.
+
+* PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance
+  AMCC suggested to set the PMU bit to 0 for best performace on
+  the PPC440 DDR controller.
+  Please see doc/README.440-DDR-performance for details.
+  Patch by Stefan Roese, 28 Jul 2006
+
+* AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
+  Please see doc/README.bamboo for details.
+  Patch by Stefan Roese, 27 Jul 2006
+
+* Fix CONFIG_CMDLINE_EDITING implementation
+  Patch by Stefan Roese, 27 Jul 2006
+
+* Fix preboot message on TQM5200 after switching to hush parser.
+
+* MCC200: set default configuration to low_boot DDR,
+  and support for configurable options high_boot and/or SDRAM.
+
+* Add support for 256 MB SDRAM on CPU87
+  Patch by Josef Wagner, 25 Nov 2005
+
+* Add configuration for cam5200 board (based on TQM5200S).
+
+* More code cleanup
+
+* Disabled kvme080 board in MAKEALL because of build problems.
+
+* Code cleanup
+
+* Update NetStar board
+  Patch by Ladislav Michl, 03 Nov 2005
+
+* Make code better readable.
+  Patch by Ladislav Michl, 14 Sep 2005
+
+* Enable initrd ATAG for xm250 board.
+  Patch by Josef Wagner, 05 Sep 2005
+
+* Add readline cmdline-editing extension
+  Patch by JinHua Luo, 01 Sep 2005
+
+* Add support for friendly-arm SBC-2410X board
+  Patch by JinHua Luo, 01 Sep 2005
+
+* Fix multi-part image support on i386 platform.
+  Patch by David Updegraff, 19 Aug 2005
+
+* Add support for KVME080 board
+  Patch by Sangmoon Kim, 18 Aug 2005
+
+* Fix MIPS LE build problem
+  Patch by Matej Kupljen, 10 Aug 2005
+
+* Check argument count in "mii" command.
+  Problem pointed out by Andrew Dyer, 13 Jun 2005
+
+* Cleanup TQM5200 board configurations:
+  - make highboot configurations use environment at high end, too,
+    to avoid flash fragmentation
+  - always use redundand environment
+  - don't enable video code for modules without graphics controller
+  - provide useful (though different) mtdparts settings
+  - get rid of CONFIG_CS_AUTOCONF which was always set anyway
+
+* Extend mkconfig tool to print more useful target name
+
+* Add support for high-boot on TQM5200 and TQM5200S boards.
+  Hint: the CPLD on the TQM5200 must be programmed with a software
+  version supporting the high boot option! The new TQM5200S is
+  already supporting this option. On the TQM5200 this option will be
+  supported in configurations with MPC5200 rev B processors.
+  To actually "high boot", set jumper X30 on the STK52xx.
+  Patch by Martin Krause, 12 Jul 2006
+
+* Add support for new TQM5200 revisions
+  - Support for TQM5200S (short version without graphic controller)
+  - Support for modules with 'N' type S29GL128N Spansion flashes
+    (requires changes to flash layout)
+  - Support for MPC5200B cpu (mostly support for second SDRAM bank)
+  Patch by Martin Krause, 07 Jul 2006
+
+* Fix support for PS/2 keyboard on TQM85xx boards
+  The PS/2 keyobard driver for the TQM85xx modules only supports the
+  internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
+  include a DUART, the TQM8560 modules can't be used with the PS/2
+  keyboard controller on the STK85xx board.
+  The PS/2 keyboard driver should work with the modules TQM8540,
+  TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
+  Make sure the PS/2 controller on the STK85xx is programmed. Jumper
+  settings: X66 1-2, 9-10; X61 2-3
+  Patch by Martin Krause, 21 Jun 2006
+
+* Adjust RTC century handling on STK52xx board to match Linux driver.
+  Patch by Martin Krause, 12 Jun 2006
+
+* Adjust filenames for USB update images on TRAB board.
+  During an automatic update via USB stick, U-Boot searches for
+  images with the name "firmware.img" and "kernel.img". This names
+  are now changed to "firmw_01.img" and "kernl_01.img". This is done,
+  to prevent updates of new boards (with the new macronics "c" step
+  flashes) with old, incompatible firmware or kernel versions.
+  Patch by Martin Krause, 21 Jun 2006
+
+* Bugfix in VFD routine on TRAB board.
+  Make sure upper lext pixel can be set to blue, too
+  (so far only red was possible).
+  Patch by Martin Krause, 15 Feb 2006
+
+* Enable buffered flash writes for TB5200 board.
+
+* Fix some bugs in TRAB board flash driver.
+  - increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds
+  - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT
+  - remove "Unlock Bypass" mode, because macronix flashes do not support
+    this mode officially
+  - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified
+    for Intel compatible flashes, not for AMD compatible.
+  Patch by Martin Krause, 15 Feb 2006
+
+* Add additional error messages to flash driver on TRAB board
+  (for erase errors and timeout errors)
+  Patch by Martin Krause, 14 Feb 2006
+
+* Add support for TB5200 board
+  The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
+  integrated in a little aluminium case.
+  Patch by Martin Krause, 8 Jun 2006
+
+* Enable buffered flash writes for TQM5200 board.
+
+* Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.
+
+* Add support for TQM885D board.
+  Patch by Martin Krause, 20 Mar 2006
+
+* Fix FEC initialisation: All MII configuration is done via FEC1
+  registers, but MII_SPEED was configured according to FEC used. So
+  if only FEC2 was used, this caused the real MII_SPEED register in
+  FEC1 to stay uninitalised, leqading to "mii_send STUCK!" messages.
+  Fix: always configure MII_SPEED on FEC1 only.
+  Patch by Markus Klotzbuecher, 12 Jul 2006
+
+* Add support for SPC1920 board.
+  Patch by Markus Klotzbuecher, 12 Jul 2006
+
+* MCC200 board: support console on any one of the Quad UART ports.
+
+* Fix error in flash protection calculation on MCC200 board.
+
+* Major PCMCIA Cleanup to make code better readable and maintainable.
+  Notes:
+  - Board-dependend code for RPXLITE and RPXCLASSIC-based boards
+    placed to the drivers/rpx_pmcia.c file to avoid duplication.
+    Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
+  - drivers/i82365.c has been split into two parts located at
+    board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
+    the only boards using CONFIG_82365).
+  - Changes were tested for clean build and *very* *few* boards.
+
+* Fix timer problems on AMCC yucca board.
+  Set Timer Clock Select to use CPU clock as a timer input source.
+
+* Bring yucca config more in line with other AMCC boards.
+
+* Add AMCC bamboo board to MAKEALL build script.
+
+* Fix AMCC bamboo eval board compilation errors.
+
+* Add system memory to the PCI region list for AMCC PPC44x CPUs.
+  Enabled it for Yucca board.
+
+* Cleanup config file and bootup output for Yucca board.
+
+* Fix CONFIG_440_GX define usage.
+
+* Remove autogenerated bmp_logo.h file.
+
+* Add support for AMCC 440SPe CPU based eval board (Yucca).
+
+* Call serial_initialize() before first debug() is used.
+
+* Cleanup trab board for GCC-4.x
+
+* VoiceBlue update: use new MTD flash partitioning methods, use more
+  reasonable TEXT_BASE, update default environment and enable keyed
+  autoboot.
+  Patch by Ladislav Michl, 16. Aug 2005
+
+* Add forgotten changes for the PLEB 2 Board.
+  Patch by David Snowdon, 13. Aug 2005
+
+* Add support for wrPPMC7xx/74xx boards
+  Patch by Richard Danter, 12 Aug 2005
+
+* Add support for gth2 board
+  Patch by Thomas Lange, Aug 11 2005
+
+* Add support for CONFIG_SERIAL_MULTI on MPC5xxx
+  Patch by Martin Krause, 8 Jun 2006
+
+  This patch supports two serial consoles on boards with
+  a MPC5xxx CPU. The console can be switched at runtime
+  by setting stdin, stdout and stderr to the desired serial
+  interface (serial0 or serial1). The PSCs to be used as
+  console port are definded by CONFIG_PSC_CONSOLE
+  and CONFIG_PSC_CONSOLE2.
+  See README.serial_multi for details.
+
+* Bugfix in I2C initialisation on S3C2400.
+  If the bus is blocked because of a previously interrupted
+  transfer, up to eleven clocks are generated on the I2CSCL
+  line to complete the transfer and to free the bus.
+  With this fix pin I2CSCL (PG6) is really configured as GPIO
+  so the clock pulses are really generated.
+  Patch by Martin Krause, 04 Apr 2006
+
+* Fix DDR6 errata on TQM834x boards
+  Patch by Thomas Waehner, 07 Mar 2006
+
+* Remove obsolete flash driver board/tqm5200/flash.c
+  Patch by Martin Krause, 11 Jan 2006
+
+* Update configuration for CMC-PU2 board
+  Patch by Martin Krause, 17 Nov 2005
+
+* Add support for PS/2 keyboard on TQM85xx board
+  Patch by Martin Krause, 07 Nov 2005
+
+  Tested on a STK85XX baseboard. Make sure the PS/2 controller
+  has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
+
+* Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
+  In tsc2000_read_channel() the delay after setting the multiplexer
+  to a temperature channel is increased from 1,5 ms to 10 ms. This
+  is to allow the multiplexer inputs to stabilize after huge steps
+  of the input signal level.
+  Patch by Martin Krause, 08 Nov 2005
+
+* Adjust TQM5200 make targets
+  Make the automatic CS configuration the default.
+  The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
+  and CONFIG_TQM5200_AC are removed.
+  "TQM5200_config" is now the default for STK52XX.200 base boards.
+  On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
+  Patch by Martin Krause, 07 Nov 2005
+
+* Fix setting of environment variable "ver" on trab board
+  The environment variable "ver" is now set before
+  do_auto_update() is called, so that "ver" can be used
+  in USB update scripts.
+  Patch by Martin Krause, 27 Oct 2005
+
+* Fix wrong usage of udelay() in led_blink() on trab board
+  Patch by Martin Krause, 27 Oct 2005
+
+* Fix udelay bug in vfd.c for trab board
+  Patch by Martin Krause, 27 Oct 2005
+
+* Disable JFFS2 support for trab board
+  Patch by Martin Krause, 27 Oct 2005
+
+* Change mtdparts definition on trab board to match current flash map
+  Patch by Martin Krause, 27 Oct 2005
+
+* Fix memory init problems on MCC200 board
+
+* Fix IxEthDB.h to compile again
+  Patch by Stefan Roese, 14 Jun 2006
+
+* Minor cleanup for PCS440EP board
+  Patch by Stefan Roese, 13 Jun 2006
+
+* Add MCF5282 support (without preloader)
+  relocate ichache_State to ram
+  u-boot can run from internal flash
+  Add EB+MCF-EV123 board support.
+  Add m68k Boards to MAKEALL
+  Patch from Jens Scharsig, 08 Aug 2005
+
+* Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
+  Patch by Scott McNutt, 08 Jun 2006
+
+* Nios II - Add EPCS Controller bootrom work-around
+  -When booting from an epcs controller, the epcs bootrom may leave the
+  slave select in an asserted state causing soft reset hang. This
+  patch ensures slave select is negated at reset.
+  Patch by Scott McNutt, 08 Jun 2006
+
+* Update PK1C20 board
+  -Update base addresses for standard configuration
+  -Eliminate use of CACHE_BYPASS in board code
+  Patch by Scott McNutt, 08 Jun 2006
+
+* Nios II - Fix I/O Macros and mini-app stubs
+  -Fix asm/io.h macros
+  -Eliminate use of CACHE_BYPASS in cpu code
+  -Eliminate assembler warnings
+  -Fix mini-app stubs and force no small data
+  Patch by Scott McNutt, 08 Jun 2006
+
+* Fix U-Boot environment sector protection on MCC200 board
+
+* Minor cleanup for PCS440EP board
+
+* Update PCS440EP port to fit into one flash device (incl. environment)
+  Patch by Stefan Roese, 06 Jun 2006
+
+* Add support for PCS440EP board
+  Patch by Stefan Roese, 02 Jun 2006
+
+* Fix examples/Makefile; some build targets were lost
+
+* Fix watchdog handling in CFI flash driver
+  Just use udelay() when waiting for status changes which will
+  implicitely trigger the watchdog.
+
+* Fix PCI to memory window size problems on PM82x boards
+  We use the "automatic" mode that was used for  the  MPC8266ADS  and
+  MPC8272 boards. Eventually this should be used on all boards?]
+  Patch by Wolfgang Grandegger, 17 Jan 2006
+
+* Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstone
+  Patch by Stefan Roese, 29 May 2006
+
+* Update Intel IXP4xx support
+  - Add IXP4xx NPE ethernet MAC support
+  - Add support for Intel IXDPG425 board
+  - Add support for Prodrive PDNB3 board
+  - Add IRQ support
+  Patch by Stefan Roese, 23 May 2006
+
+* Fix problem in PVR detection for 440GR
+  Patch by Stefan Roese, 18 May 2006
+
+* Fix gcc 3.4.x AFLAGS setting for m68k platform.
+
+* Enable autoboot for M5271EVB board.
+
+* Changed default ramdisk addr in yosemite/yellowstone ports
+  Patch by Stefan Roese, 15 May 2006
+
+* Fix PCMCIA support on virtlab2
+
+* Add support for VirtLab2 board
+  (needed because of differences in the PCMCIA hardware).
+
+* Minor cleanup.
+
+* Update yosemite configuration to enable flash write buffer support
+  Patch by Stefan Roese, 10 May 2006
+
+* Fix compile warnings in common/xyzModem.c
+  Patch by Stefan Roese, 10 May 2006
+
+* Add support for AMCC 440EP Rev C and 440GR Rev B
+  Patch by John Otken, 08 May 2006
+
+* OMAP 5912/OSK: update EMIFS CS1 timings:
+  Problems have been seen in the linux kernel's smc91x network driver
+  due to improper bus timings.  The latest 2.6 OMAP kernels currently
+  have a workaround, but this fix belongs in u-boot.
+  Patch by Kevin Hilman, 13 Oct 2005
+
+* Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports
+  Patch by Hiroki Kaminaga, 11 Mar 2006
+
+* Update omap5912osk board support
+  - Fix OMAP support that omap5912osk compiles in current source tree
+  - Update with code from "http://omap.spectrumdigital.com/osk5912"
+    to fix problems with DDR initialization
+  - Fix timer setup
+  - Use CFI flash driver and support complete 32MB of onboard flash
+  - Add "print_cpuinfo()" and "checkboard()" functions to display
+    CPU (with frequency) and Board infos
+  Patch by Stefan Roese, 10 May 2006
+
+* Fix watchdog issues for ColdFire boards.
+
+* Add M5271EVB board support.
+
+* Make R5200 specific low level initialization board conditional.
+
+* Update CPU target identification strings for ColdFire family.
+
+* Update register definitions for MCF5271.
+
+* Fix serial console support for MCF5271.
+
+* Fixes for gcc 3.4 based m68k toolchain,
+  based on patch by Jate Sujjavanich.
+
+* Fix lowboot support on MCC200 board
+
+* Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
+  - Removed MPC8349ADS port
+  - Added PCI support to MPC8349ADS
+  - reworked memory map to allow mapping of all regions with BATs
+  Patch by Kumar Gala, 20 Apr 2006
+
+* Coding Style cleanup
+
+* Write RTC seconds first to maintain settings integrity per
+  Maxim/Dallas DS1306 data sheet.
+  Patch by Alan J. Luse, 02 May 2006
+
+* Scheduled for removal: strnicmp() which is unused
+
+* Update for Intel Monahans boards:
+  - support for magic key detection and handling on delta board
+  - NAND support for zylonite board + some minor cleanup
+
+* Declare load_serial_ymodem() when using CFG_CMD_LOADB.
+  Patch by Jon Loeliger, 01 May 2006
+
+* Fixed handling of bad checksums with "mkimage -l"
+
+* Added support for BC3450 board
+  Patch by Stefan Strobl, 21 Oct 2005
+
+* Update for NC650 board:
+  - Support rev1 and rev2 hardware
+  - adapt to new NAND layer
+  - add CP850 configuration based on NC650
+
+* MPC5200: enable snooping of DMA transactions on XLB even if no PCI
+  is configured; othrwise DMA accesses aren't cache coherent which
+  causes for example USB to fail.
+
+* Some code cleanup
+
+* Fix dbau1x00 boards broken by dbau1550 patch
+  PLL:s were not set for boards other than 1550.
+  Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
+  Default boot is now bootp for cards other than 1550.
+  Patch by Thomas Lange, 10 Aug 2005
+
+* Fixes common/cmd_flash.c:
+  - fix some compiler/parser error, if using m68k tool chain
+  - optical fix for protect on/off all messages, if using more
+    then one bank
+  Patch by Jens Scharsig, 28 Jul 2005
+
+* Fix Quad UART mapping on MCC200 board due to new HW revision
+
+* Fix JFFS2 support for legacy NAND driver.
+
+* Remove dependencies between DoC code and old legacy NAND driver.
+
+* Fix PM828_PCI target, for which PCI was *not* configured in.
+
+* Fix Lite5200B support: initialize SDelay register
+  See Freescale's AN3221 "MPC5200B SDRAM Initialization and
+  Configuration", 3.3.1 SDelay--MBAR + 0x0190
+
+* Changes/fixes for drivers/cfi_flash.c:
+
+  - Add Intel legacy lock/unlock support to common CFI driver
+
+    On some Intel flash's (e.g. Intel J3) legacy unlocking is
+    supported, meaning that unlocking of one sector will unlock
+    all sectors of this bank. Using this feature, unlocking
+    of all sectors upon startup (via env var "unlock=yes") will
+    get much faster.
+
+  - Fixed problem with multiple reads of envronment variable
+    "unlock" as pointed out by Reinhard Arlt & Anders Larsen.
+
+  - Removed unwanted linefeeds from "protect" command when
+    CFG_FLASH_PROTECTION is enabled.
+
+  - Changed p3p400 board to use CFG_FLASH_PROTECTION
+
+  Patch by Stefan Roese, 01 Apr 2006
+
+* Changes/fixes for drivers/cfi_flash.c:
+  - Correctly handle the cases where CFG_HZ != 1000 (several
+    XScale-based boards)
+  - Fix the timeout calculation of buffered writes (off by a
+    factor of 1000)
+  Patch by Anders Larsen, 31 Mar 2006
+
+* Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
+
+  405 SDRAM: - The SDRAM parameters can now be defined in the board
+	       config file and the 405 SDRAM controller values will
+	       be calculated upon bootup (see PPChameleonEVB).
+	       When those settings are not defined in the board
+	       config file, the register setup will be as it is now,
+	       so this implementation should not break any current
+	       design using this code.
+
+	       Thanks to Andrea Marson from DAVE for this patch.
+
+  440 DDR:   - Added function sdram_tr1_set to auto calculate the
+	       TR1 value for the DDR.
+	     - Added ECC support (see p3p440).
+
+  Patch by Stefan Roese, 17 Mar 2006
+
+* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
+  Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
+
+* Add support for ymodem protocol download
+  Patch by Stefano Babic, 29 Mar 2006
+
+* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
+  Merge from Markus Klotzbücher's repo, 01 Apr 2006
+
+* GCC-4.x fixes: clean up global data pointer initialization for all
+  boards
+
+* Update for Delta board:
+  - redundant NAND environment
+  - misc Monahans cleanups (remove dead code etc.)
+  - DA9030 Initialization; some minimal changes to PXA I2C driver to
+    make it work with the Monahans.
+  - Make Monahans clock frequency configurable using
+    CFG_MONAHANS_RUN_MODE_OSC_RATIO and
+    CFG_MONAHANS_TURBO_RUN_MODE_RATIO.
+  Merge from Markus Klotzbücher's repo, 25 Mar 2006
+
+* Enable Quad UART om MCC200 board.
+
+* Cleanup MCC200 board configuration; omit non-existent stuff.
+
+* Add support for MPC859/866 Rev. A.0
+
+* Add command for handling DDR ECC registers on MPC8349EE MDS board.
+
+* Fix DDR ECC bit definitions for MPC83xx.
+
+* Add initial support for MPC8349E MDS board.
+
+* Add support for ECC DDR initialization on MPC83xx.
+
+* Add DMA support for MPC83xx.
+
+* Add sync in do_reset() routine for MPC83xx after RPR register
+  was written to. It is need on some targets when BAT translation
+  is enabled.
+
+* Add bit definitions for MPC83xx DDR controller registers.
+
+* Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
+
+* Correct shift offsets in icache_status and dcache_status for MPC83xx.
+
+* Add support for DS1374 RTC chip.
+
+* Add support for Lite5200B board.
+  Patch by  Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
+
+* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific
+  timer and cpu_reset code from cpu/$(CPU) into the new
+  cpu/$(CPU)/$(SOC) directories
+  Patch by Andreas Engel, 13 Mar 2006
+
+* Change max size of uncompressed uImage's to 8MByte and add
+  CFG_BOOTM_LEN to adjust this setting.
+
+  As mentioned by Robin Getz on 2005-05-24 the size of uncompressed
+  uImages was restricted to 4MBytes. This default size is now
+  increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN
+  in the board config file.
+
+  Patch by Stefan Roese, 13 Mar 2006
+
+* Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
+  Patch by Stefan Roese, 13 Mar 2006
+
+* cpu/ppc4xx/start.S : exceptions are enabled after relocation
+  Patch by Cedric Vincent, 06 Jul 2005
+
+* au1x00_eth.c: check malloc return value and abort if it failed
+  Patch by Andrew Dyer, 26 Jul 2005
+
+* Change the sequence of events in soft_i2c.c:send_ack() to keep from
+  incorrectly generating start/stop conditions on the bus.
+  Patch by Andrew Dyer, 26 Jul 2005
+
+* Fix bug in [id]cache_status commands for MPC85xx processors;
+  should look at LSB of L1CSRn registers to determine if L1 cache is
+  enabled, not the MSB.
+  Patch by Murray Jensen, 19 Jul 2005
+
+* Fix array overflow with fw_setenv on uninitialised environment
+  Patch by Murray Jensen, 15 Jul 2005
+
+* Add support for EmbeddedPlanet EP88x boards
+  Patch by Yuli Barcohen, 13 Jul 2005
+
+* Remove board specific configuration includes from the common xilinx
+  ethernet and iic adapter code.
+  Patch by Michael Libeskind, 12 Jul 2005
+
+* Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
+  Patch by Murray Jensen, 08 Jul 2005
+
+* Add (some) definitions for the MPC85xx local bus controller
+  Patch by Murray Jensen, 08 Jul 2005
+
+* Add CPM2 I/O pin functions for MPC85xx processors
+  Patch by Murray Jensen, 08 Jul 2005
+
+* Fix compile problem
+
+* Added PCI support for MPC8349ADS board
+  Patch by Kumar Gala 11 Jan 2006
+
+* Enable address translation on MPC83xx
+  Patch by Kumar Gala, 10 Feb 2006
+
+* Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx
+  Patch by Kumar Gala, 25 Jan 2006
+
+* Fixed defines for MPC83xx SICRL register to match current specs
+  Patch by Kumar Gala, 23 Jan 2006
+
+* Only disable the MPC83xx watchdog if its enabled out of reset.
+  If its disabled out of reset SW can later enable it if so desired
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Allow config of GPIO direction & data registers at boot on 83xx
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Enable time handling on 83xx
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Make System IO Config Registers board configurable on MPC83xx
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Fixed PCI indirect config ops to handle multiple PCI controllers
+  We need to adjust the bus number we are trying to access based
+  on which PCI controller its on
+  Patch by Kumar Gala, 12 Jan 2006
+
+* Report back PCI bus when doing table based device config
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Added support for PCI prefetchable region and BARs
+  If a host controller sets up a region as prefetchable and
+  a device's BAR denotes it as prefetchable, allocate the
+  BAR into the prefetch region.
+
+  If a BAR is prefetchable and no prefetchable region has
+  been setup by the controller we fall back to allocating
+  the BAR into the normally memory region.
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Add helper function for generic flat device tree fixups for mpc83xx
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Add support for passing initrd information via flat device tree
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Added OF_STDOUT_PATH and OF_SOC
+
+  OF_STDOUT_PATH specifies the path to the device the kernel can use
+  for console output
+
+  OF_SOC specifies the proper name of the SOC node if one exists.
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Allow board code to fixup the flat device tree before booting a kernel
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Added CONFIG_ options for bd_t and env in flat dev tree
+
+	CONFIG_OF_HAS_BD_T will put a copy of the bd_t
+	into the resulting flat device tree.
+
+	CONFIG_OF_HAS_UBOOT_ENV will copy the environment
+	variables from u-boot into the flat device tree
+
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Add support for the DHCP vendor optional bootfile (#67).
+  Ignores the vendor TFTP server name option (#66).
+  Patch by Murray Jensen, 30 Jun 2005
+
+* Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode
+  Patch by Andy Fleming, 14 Jun 2005
+
+* Fix bad register definitions for LTX971 PHY on MPC85xx boards.
+  Patch by Gerhard Jaeger, 21 Jun 2005
+
+* Add netconsole and some more commands to RPXlite_DW board
+  Patch by Sam Song, 19 Jun 2005
+
+* Fix bad declaration on pci_cfgfunc_nothing
+  Patch by Sam Song, 19 Jun 2005
+
+* Adjust "echo" as a default command
+  Patch by Sam Song, 19 Jun 2005
+
+* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
+  Patch by KokHow Teh, 16 Jun 2005
+
+* Add crc of data to jffs2 (in jffs2_1pass_build_lists()).
+  Patch by Rick Bronson, 15 Jun 2005
+
+* Coding Style cleanup
+
+* Avoid dereferencing NULL in find_cmd() if no valid commands were found
+  Patch by Andrew Dyer, 13 Jun 2005
+
+* Add ADI Blackfin support
+  - add support for Analog Devices Blackfin BF533 CPU
+  - add support for the ADI BF533 Stamp uClinux board
+  - add support for the ADI BF533 EZKit board
+  Patches by Richard Klingler, 11 Jun 2005
+
+* Add loads of ntohl() in image header handling
+  Patch by Steven Scholz, 10 Jun 2005
+
+* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
+  variable to set clock
+  Patch by Yuli Barcohen, 05 Jun 2005
+
+* RPXlite configuration fixes
+  - Use correct flash sector size
+  - Use correct memory test end address
+  - Add support for bzip2 compression
+  - Various small fixes
+  Patch by Yuli Barcohen, 05 Jun 2005
+
+* Memory configuration changes for ZPC.1900 board
+  - Fix SDRAM timing on both local bus and 60x bus
+  - Add support for second flash bank (SIMM)
+  - Change boot flash base
+  Patch by Yuli Barcohen, 05 Jun 2005
+
+* Add support for Adder boards with 16MB SDRAM;
+  add support for second FEC on Adder87x board.
+  Patch by Yuli Barcohen, 05 Jun 2005
+
+* Fix conditional for including ks8695eth driver
+  Patch by Greg Ungerer, 04 Jun 2005
+
+* Fix Makefile: include config.mk only after CROSS_COMPILE is defined
+  Patch by Friedrich Lobenstock, 02 Jun 2005
+
+* Fix comment in common/soft_i2c.c
+  Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
+
+* Cleanup compiler warnings.
+  Patch by Greg Ungerer, 21 May 2005
+
+* Word alignment fixes for word aligned NS16550 UART
+  Patch by Jean-Paul Saman, 01 Mar 2005
+
+  Fixes bug with UART that only supports word aligned access: removed
+  "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
+  (broken!) versions of GCC generate byte accesses when encountering
+  the packed attribute regardless if the struct is already correctly
+  aligned for a platform. Peripherals that can only handle word
+  aligned access won't work properly when accessed with byte access.
+  The struct NS16550 is already word aligned for REG_SIZE = 4, so
+  there is no need to packed the struct in that case.
+
+* Fix behaviour if gatewayip is not set
+  Patch by Robin Gilks, 23 Dec 2004
+
+* Fix cleanup for netstart board.
+  Remove build results from repository
+
+* Some code cleanup for GCC 4.x
+
+* Fixes to support environment in NAND flash;
+  enable NAND flash based environment for delta board.
+
+* Add support for Intel Monahans CPU on Zylonite and Delta boards
+  (This is Work in Progress!)
+
+* Add support for TQM8260-AI boards.
+
+* Minor code cleanup
+
+* Merge the new NAND code (testing-NAND brach); see doc/README.nand
+  Rewrite of NAND code based on what is in 2.6.12 Linux kernel
+  Patch by Ladislav Michl, 29 Jun 2005
+
+* Add lowboot target to mcc200 board
+  Patch by Stefan Roese, 4 Mar 2006
+
+* Fix problem with flash_get_size() from CFI driver update
+  Patch by Stefan Roese, 1 Mar 2006
+
+* Make CFG_NO_FLASH work on ARM systems
+  Patch by Markus Klotzbuecher, 27 Feb 2006
+
+* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
+  use hush shell.
+
+* Convert mcc200 to use common CFI flash driver
+  Patch by Stefan Roese, 28 Feb 2006
+
+* Add env-variable "unlock" to handle initial state of sectors
+  (locked/unlocked).
+
+  Only the U-Boot image and it's environment is protected,
+  all other sectors are unprotected (unlocked) if flash
+  hardware protection is used (CFG_FLASH_PROTECTION) and
+  the environment variable "unlock" is set to "yes".
+
+  Patch by Stefan Roese, 28 Feb 2006
+
+* Update drivers/cfi_flash.c:
+  - find_sector() called in both versions of flash_write_cfiword()
+  Patch by Peter Pearse, 27th Feb 2006
+
+* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
+  Patch by Jose Maria Lopez, 16 Jan 2006
+
+* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
+  Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
+
+* Changes/fixes for drivers/cfi_flash.c:
+  We *should* check if there are any error bits if the previous call
+  returned ERR_OK (Otherwise we will have output an error message in
+  flash_status_check() already.)  The original code would only check for
+  error bits if flash_status_check() returns ERR_TIMEOUT.
+  Patch by Marcus Hall, 23 Aug 2005
+
+* Changes/fixes for drivers/cfi_flash.c:
+  - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
+  - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
+  Patch by Sangmoon Kim, 19 Aug 2005
+
+* Fixes for drivers/cfi_flash.c:
+  - Fix wrong timeout value usage in flash_status_check()
+  - Round write_tout up when converting to msec in flash_get_size()
+  - Remove clearing flash status at the end of flash_write_cfibuffer()
+    which sets Intel 28F640J3 flash back to command mode on CSB472
+  Patch by Tolunay Orkun, 02 July 2005
+
+* Add basic support for the SMMACO4 Board from PanDaCom.
+  Patch by Heiko Schocher, 20 Feb 2006
+
+* Add GIT version information (commid ID) to untagged U-Boot versions
+
+  As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
+  of all unreleased (untagged) U-Boot images will be automatically
+  extended upon compiletime with a part of the GIT commit ID and
+  possibly with "dirty" if uncommited changes are detected.
+
+  Here an example for the resulting version:
+  "U-Boot 1.1.4-g3457ac18-dirty"
+
+  The version is now maintained in the toplevel Makefile and the
+  version headers are autogenerated.
+
+  Patch by Stefan Roese, 9 Feb 2006
+
+* Update default environment for INKA4x00 board.
+
+* Convert CPCI750 to use common CFI flash driver
+  Patch by Reinhard Arlt, 8 Feb 2006
+
+* Various changes to esd HH405 board specific files
+  Patch by Matthias Fuchs, 07 Feb 2006
+
+* Cleanup U-Boot boot messages on ARM.
+
+  To match the U-Boot user interface on ARM platforms to the U-Boot
+  standard (as on PPC platforms), some messages with debug character
+  are removed from the default U-Boot build.
+  Enable DEBUG for lib_arm/board.c to enable debug messages.
+  New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
+  Patch	 by Stefan Roese, 24 Jan 2006
+
+* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
+  Patch by Stefan Roese, 18 Jan 2006
+
+* Add VGA support (CT69000) to CPCI750 board.
+  Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
+  Patch by Reinhard Arlt, 30 Dec 2005
+
+* PMC405 and CPCI405: Moved configuration of pci resources
+  into config file.
+  PMC405 and CPCI2DP: Added firmware download and booting via pci.
+  Patch by Matthias Fuchs, 20 Dec 2005
+
+* Add ColdFire targets to MAKEALL script
+  Patch by Zachary Landau, 26 Jan 2006
+
+* Add support for r5200 board
+  Patch by Zachary Landau, 26 Jan 2006
+
+* Add support for Freescale M5271 processor
+  Patch by Zachary Landau, 26 Jan 2006
+
+* Fix 28F256J3A support on PM520 board
+  (without bank-switching only 32 MB can be accessed)
+
+* Fix mkimage bug with multifile images created on 64 bit systems.
+
+* Add support for 28F256J3A flash (=> 64 MB) on PM520 board
+
+* Fix compiler problem with at91rm9200dk board.
+  Patch by Eugen Bigz, 19 Dec 2005
+
+======================================================================
+Changes for U-Boot 1.1.4:
+======================================================================
+
+* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
+  - Changed GPIO setup to enable another address line in order to
+    address 64M of FLASH.
+  - Added function sdram_tr1_set to auto calculate the tr1 value for
+    the DDR.
+  Patch by Steven Blakeslee, 12 Dec 2005
+
+* MPC5200:  Set PCI retry counter to 0 = infinite retry;
+  The default of 255 is too short for slow devices.
+  Patch by Martin Nykodym, 12 Dec 2005
+
+* Change port configuration for O2DNT (CODEC1 on PSC1).
+
+* Fix register for PCI async mode on PPC440EP
+  Patch by Youngchul Bang, 08 Dec 2005
+
+* Fix U-Boot linking problems (add .eh_frame segment to linker script)
+  This segment may be required by some libgcc.a functions
+  (like _udivdi3).
+
+* Fix DPRAM offset/size for MPC8541/8555.
+  Simplify TQM85xx Makefile handling.
+
+* Fix data overflow (typo?) in rtc/ds1302.c
+
+* Fix U-Boot compilation for MIPS boards using ELDK 4.0
+
+* Add support for TQM8541/8555 boards, TQM85xx support reworked:
+  - Support for TQM8541/8555 boards added.
+  - Complete rework of TQM8540/8560 support.
+  - Common TQM85xx code now supports all current TQM85xx platforms
+    (TQM8540/8541/8555/8560).
+  - DDR SDRAM size detection added.
+  - CAS latency default values can be overwritten by setting "serial#"
+    to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
+    If problems are detected with this non default CAS latency,
+    the default values will be used instead.
+  - Flash size detection added.
+  - Moved FCC ethernet driver initialization behind TSEC driver init
+    -> TSEC is first device.
+  Patch by Stefan Roese, 30 Nov 2005
+
+* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
+  Patch by John Otken, 23 Nov 2005
+
+* Changed PPC44x startup message (cpu info, speed...) to common style:
+  On PPC44x platforms, the startup message generated in "cpu.c" only
+  comprised the ppc type and revision but not additional information
+  like speed etc. Those speed infos where printed in the board specific
+  code. This new implementation now prints all CPU infos in the common
+  cpu specific code. No board specific code is needed anymore and
+  therefore removed from all current 44x implementations.
+  Patch by Stefan Roese, 27 Nov 2005
+
+* Adjust TQM834x PHY addresses for latest hardware revision.
+
+* Increase malloc arena on TQM5200 board to 256 kB.
+  With 64 kb uniform flash sector size the old value of 128 kB was
+  too small.
+
+* Fix miiphy global data initialization (problem on 4xx boards when
+  no ethaddr is assigned). Initialization moved from
+  miiphy_register() to eth_initialize().
+
+  Based on initial patch for 4xx platform by Matthias Fuchs.
+
+* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
+
+* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
+  The COPYING file was extended to make clear that these files can be
+  used in non-GPL code, too.
+  Also, a corresponding note was placed in the headers of the affected files.
+
+* Add support for Prodrive P3P440 board:
+  - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
+  - CFG_FLASH_QUIET_TEST added to use the common CFI driver
+    for bank autodetection
+  Patch by Stefan Roese, 22 Nov 2005
+
+* Change all '$(...)' variable references into '${...}'
+  which makes the environment compatible with the hush shell.
+  WARNING: Support for the old '$(...)' syntax will be
+  discontinued in a later version.
+
+* Minor changes to init flags in TQM834x PCI.
+
+* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
+  Patch by Stefan Roese, 15 Nov 2005
+
+* New PPC 405EP board added: CMS700
+  Added CONFIG_NET_MULTI for VOM405 board.
+  Added reset_phy() for VOM405 board.
+  Patch by Matthias Fuchs, 09 Nov 2005
+
+* Updated PCI mapping for esd CPCI2DP board.
+  Add support for error LED.
+  Patch by Matthias Fuchs, 07 Nov 2005
+
+* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
+  Patch by Stefan Roese, 07 Nov 2005
+
+* Correct PPC Timebase register definitions (SPRN_TBRL...)
+  Patch by Stefan Roese, 07 Nov 2005
+
+* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
+  Patch by Stefan Roese, 05 Nov 2005
+
+* Additional fix for external IRQ config on Yellowstone & Yosemite
+  Patch by Stefan Roese, 03 Nov 2005
+
+* Add support for Ocotea pass 3 with 440GX Rev. F
+  Patch by Stefan Roese, 01 Nov 2005
+
+* Fix external IRQ configuration on Yellowstone & Yosemite
+  Patch by Stefan Roese, 28 Oct 2005
+
+* Add support for multiple PHYs.
+  Tested on the following boards:
+	cmcpu2	    (at91rm9200/ether.c)
+	PPChameleon (ppc4xx/4xx_enet.c)
+	yukon	    (mpc8220/fec.c)
+	uc100	    (mpc8xx/fec.c)
+	tqm834x	    (mpc834x/tsec.c) with EEPRO100
+	lite5200    (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
+  Main changes include:
+  common/miiphyutil.c
+  - miiphy_register routine was added to allow multiple PHYs to be registered
+  - miiphy_read and miiphy_write are now defined in this file, and
+    require additional argument (char *devname)
+  - other miiphy_* routines also require additional device name argument
+  ../lib_i386/board.c
+  ../lib_ppc/board.c
+  Calling reset_phy() was moved to be executed *after* eth_initialize().
+  This is necessary as now some of the implementations of reset_phy()
+  may need to use miiphy_reset() which is not allowed before eth_initialize()
+  as eth_initialize registers all required miiphy_* routines.
+  Tested on IP860 and PHY initializes properly after this change.
+
+* Correct includes for flat tree builder.
+
+* Fix conflicting types (flash_write()) in trab auto_update.c.
+
+* Add PCI support for the TQM834x board.
+
+* Add missing 4xx board to MAKEALL
+  Patch by Stefan Roese, 20 Oct 2005
+
+* Fix conflicting types (flash_write()) in esd auto_update.c
+  Patch by Stefan Roese, 20 Oct 2005
+
+* Fix problem with sleep in NetConsole (use get_timer())
+  Patch by Stefan Roese, 20 Oct 2005
+
+* Add NetConsole Support for AMCC eval boards
+  Patch by Stefan Roese, 20 Oct 2005
+
+* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
+  Patch by Stefan Roese, 18 Oct 2005
+
+* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
+  Fix identation on ext2ls help entry.
+  Patch by Stefan Roese, 14 Oct 2005
+
+* Add support for TQM834x boards.
+  Cleanup.
+
+* Cleanup for GCC-4.x
+
+* Add documentation for Open Firmware Flat Tree and usage.
+  Patch by Pantelis Antoniou, 13 Oct 2005
+
+* Add missing files for Pantelis Antoniou's patch
+  Patch by Pantelis Antoniou, 04 Sep 2005
+
+* Fix problem in ppc4xx eth-driver without ethaddr (only without
+  CONFIG_NET_MULTI set)
+  Patch by Stefan Roese, 10 Oct 2005
+
+* Fix gzip bmp support (test if malloc fails, warning when truncated).
+  Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
+  Patch by Stefan Roese, 07 Oct 2005
+
+* Add support for OF flat tree for the STXtc board.
+  Patch by Pantelis Antoniou, 04 Sep 2005
+
+* Support passing of OF flat trees to the kernel.
+  Patch by Pantelis Antoniou, 04 Sep 2005
+
+* Cleanup
+
+* Add support for NetSilicon NS7520 processor.
+  Patch by Art Shipkowski, 12 May 2005
+
+* Add support for AP1000 board.
+  Patch by James MacAulay, 07 Oct 2005
+
+* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
+  Patch by Anders Larsen, 07 Oct 2005
+
+  The Atmel errata #11 states that the transfer buffer descriptor
+  table must be aligned on a 16-word boundary. As it turned out, this
+  is insufficient - it seems the table must be aligned on a boundary
+  at least as large as the table itself (in Linux this is not an
+  issue - the table is aligned on a PAGE_SIZE (4096) boundary).
+
+* Fixed compilation for ARM when using a (standard) hard-FP toolchain
+  Patch by Anders Larsen, 07 Oct 2005
+
+* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
+  sed the linker scripts, rather than pre-process them.
+  Patch by Peter Pearse, 07 Oct 2005
+
+* Update make target for ARM supported boards.
+  Use lowlevel_init() instead of platformsetup() [rename].
+  Patch by Peter Pearse, 06 Oct 2005
+
+* Fix booting from serial dataflash on AT91RM9200
+  Patch by Peter Menzebach, 29 Aug 2005
+
+* Add JFFS2 support for TRAB board
+  Patch by Martin Krause, 25 Aug 2005
+
+* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
+  Patch by Marcus Hall, 24 Aug 2005
+
+* Fix the machine-id of the Cogent csb637 board
+  Patch by Anders Larsen, 05 Oct 2005
+
+* Complete support for the KwikByte KB920x boards
+  Patch by Anders Larsen, 05 Oct 2005
+
+* Set the AT91RM9200 clock to asynchronous mode
+  Patch by Anders Larsen, 03 May 2005
+
+* Set the AT91RM9200 clock to synchronous mode
+  Patch by Anders Larsen, 29 Apr 2005
+
+* Add support for Cogent csb637
+  Patch by Anders Larsen, 29 Apr 2005
+
+* Fix dm9161.c initialization
+  Patch by Anders Larsen, 29 Apr 2005
+
+* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
+  (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
+
+* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
+  Patch by Anders Larsen, 29 Apr 2005
+
+* Fix device partition intialization for SystemACE disks.
+  Patch by Stephen Williams, 28 Apr 2005
+
+* Added support for KwikByte KB920x boards (based on AT91RM9200)
+  Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
+
+* Add support for S29GL064M-R3 flash chip on xsengine board
+  Patch by Kurt Stremerch, 18 Apr 2005
+
+* E500 update: repoint IVPR to RAM when code is relocated
+  Patch by Kylo Ginsberg, 13 Apr 2005
+
+* Fix loop end test in lib_generic/string.c:strswab()
+  Patch by Andrew Dyer, October 10, 2005
+  Signed-off-by: Andrew Dyer <amdyer@gmail.com>
+
+* Cleanup
+
+* Update ARM Integrator boards:
+  Correct addessing errors in platform files.
+  Split off common core module data from Integrator header files to
+  include/armcoremodule.h.
+  Patch by Peter Pearse, 04 Oct 2005
+
+* Make sure only supported compiler options are used
+  Import "cc-option" shell function from kernel and
+  use it to get the correct ARM GCC options for individual CPUs
+  Patch by Peter Pearse, 30 Jun 2005
+
+* Fix 440GR to print correct cpu revision
+  Patch by Stefan Roese, 04 Oct 2005
+
+* Change board message on AMCC Yosemite & Yellowstone to common style
+  Patch by Stefan Roese, 03 Oct 2005
+
+* Fix compiler warning
+
+* Fix FEC PHY addresses for TQM85xx boards
+
+* Fix uninitialized variable problem in hush shell
+  Patch by Lars Rostock, 26 Sep 2005
+
+* Undo change of f6e20fc6ca... to include/configs/trab.h
+  (Must have been an accident?)
+
+* Add support for AT91RM9200 OHCI Controller.
+  Patch by Eric Benard, 07 Apr 2005
+
+* Update ARM mach-types.h
+  Patch by Eric Benard, 07 Apr 2005
+
+* Add support for MP2USB board.
+  Patch by Eric Benard, 07 Apr 2005
+
+* Add board support for armadillo HT1070
+  Patch by Rowel Atienza, 06 Apr 2005
+
+* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
+  Patch by Vitaly Bordug, 30 Mar 2005
+
+* Add iopset command on mpc8xx
+  Patch by Daniel Eisenhut, 25 Mar 2005
+
+* Add support for MII in eepro100 driver.
+  Patch by Gleb Natapov, 21 Mar 2005
+
+* Fixes to the Lubbock (PXA 25x) support:
+  - Resolve the FIXME with respect to saving the u-boot environment.
+  - Make the default load address land in real memory.
+  - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
+  Patch by David Brownell, 10 Mar 2005
+
+* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
+  Patch by Marc Leeman, 04 Mar 2005
+
+* OMAP242x H4 board update
+  - fix for ES2 differences.
+  - switch to using the cfi_flash driver.
+  - fix SRAM build address.
+  - fix for GP device operation.
+  - unlock SRAM for GP devices.
+  - display more device information.
+  - fix potential deadlock in omap24xx_i2c driver.
+  - fix DLL load values to match dpllout*1 operation.
+  - fix 2nd chip select init for combo DDR device.
+  - add support for CFI Intel 28F256L18 on H4 board.
+  Patch by Richard Woodruff, 03 Mar 2005
+
+* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
+  Patch by Steven Scholz, 02 Mar 2005
+
+* Fix typo in eth.c
+  Patch by Ara Avanesyan, 24 Feb 2005
+
+* Remove unneeded #include <malloc.h>
+  Patch by Ladislav Michl, 22 Feb 2005
+
+* Add cramfs support for m68k
+  Patch by Zachary Landau, 21 Feb 2005
+
+* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
+  Patch by Jeff Angielski, 21 Feb 2005
+
+* Fix au1x00_serial baud rate calculation:
+  remove hardcoded cpu clock divisor and use register instead;
+  round up instead of truncate
+  Patch by Andrew Dyer, 15 Feb 2005
+
+* Add Xilinx Spartan3 family FPGA support
+  Patch by Kurt Stremerch, 14 Feb 2005
+
+* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
+  Patch by Zachary Landau, 11 Feb 2005
+
+* Fix VOH405 Support
+  Patch by Matthias Fuchs, 25 Sep 2005
+
+* Added support for PCI bridge on MPC8272ADS
+  Patch by Vitaly Bordug, Feb 09 2005
+
+* Update multicore CM9XX support for Integrator AP to allow booting from flash
+  Patch by Jean-Paul Saman, 8 Feb 2005
+
+* Fix strswab() to reliably find end of string
+  Patch by Andrew Dyer, 08 Feb 2005
+
+* Fix typos in include/ppc440.h
+  Patch by Andrew E Mileski, 04 Feb 2005
+
+* Add Vibren (was Accelent) PXA255 IDP Support
+  Patch by Cliff Brake, 04 Feb 2005
+
+* Fix tools/bmp_logo.c using incorrect offset to pixel data
+  Patch by Andrew Dyer, 31 Jan 2005
+
+* Add ARM946E cpu and core module targets; remap memory to 0x00000000
+  Patch by Peter Pearse, 2 Feb 2005
+
+* Fix error handling in tools/env/fw_env.c
+  Patch by Ara Avanesyan, 01 Feb 2005
+
+* Fix MGT5100 PSC baudrate calculation
+  Patch by Sebastian Schau, 27 Jan 2005
+
+* OMAP242x fix for GP device booting
+  - Add SRAM unlock for GP devices.
+  - Change DDR DLL unlock value to allow DPLLout*1 operation.
+  Patches by Richard Woodruff, 21 Jan 2005:
+
+* Add support for AMD's Pb1x00 eval board;
+  add MII routines to the au1x00 ethernet driver;
+  add USB ohci driver (work in progress)
+  Patch by Thomas Sailer, 20 Jan 2005
+
+* Update omap5912osk board
+  Use drivers/cfi_flash.c instead of private flash driver;
+  Remove hardcoded personalized settings from omap5912osk.h;
+  Fix spacing with (RO) marks in 'flinfo' output.
+  Patch by Michael Bendzick, 14 Jan 2005
+
+* Fix warnings for PCI code on ixp
+  Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
+
+* virtex2 fix for bogus download error messages
+  The virtex2 FPGA download code watches for init going active during
+  a download of config data as an error condition. init also goes
+  active after a configuration is finished in concert with the done
+  signal. So far, the code does not check for done active until all
+  of the configuration data is sent. If configuration data has a few
+  extra pad bytes at the end, this would cause an error message even
+  though the download had suceeded.
+  NOTE: virtex2 slave serial and spartan2 versions may still have the
+  same problem.
+  Patch by Andrew Dyer, 12 Jan 2005
+
+* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
+  Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
+  message when probing for nonexistent flash in little endian mode.
+  As a side effect more efficient and smaller code is generated,
+  which is always a Good Thing (TM).
+  Patch by Ladislav Michl, 24 Sep 2005
+
+* Update for TFTP using a fixed UDP port
+  Use the approved environment variable names. Added "tftpdstp" to
+  allow ports other than 69 per Tolunay Orkun's recommendation.
+  Patch by Jerry Van Baren, 12 Jan 2005
+
+* Allow to force TFTP to use a fixed UDP port
+  (Add a configuration option CONFIG_TFTP_PORT and optional env
+  variable tftpport)
+  Patch by Jerry Van Baren, 10 Jan 2005
+
+* Fix ethernet timeouts on dbau1550 and other au1x00 systems
+  Patch by Leif Lindholm, 29 Dec 2004
+
+* Cleanup: fix broken builds
+
+* Fix PHY address argument passing with mii info command
+  Patch by Andrew Dyer, 28 Dec 2004
+
+* Cleanup (PPC4xx is AMCC now)
+
+* esd CPCI2DP board added
+  Patch by Matthias Fuchs, 22 Sep 2005
+
+* esd PMC405 board updated
+  Patch by Matthias Fuchs, 22 Sep 2005
+
+* Add SM501 support to HH405 board.
+  Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
+  Add support for eeprom write-enable (CFG_EEPROM_WREN).
+  Patch by Stefan Roese, 22 Sep 2005
+
+* Fix autonegotiation in tsec ethernet driver
+  Patch by Stefan Roese, 21 Sep 2005
+
+* Fix bug in auto_update (trab board)
+  Patch by Martin Krause, 16 Sep 2005
+
+* Fix computation of framebuffer palette for 8bpp LCD bitmaps
+  Patch by Francesco Mandracci, 16 Sep 2005
+
+* Update configuration for INKA4x0 board
+
+* Update configuration for PM854 board
+  Based on patch by R. Loeffl, 20 Jul 2005
+
+* Add PCI support to TQM8540 and TQM8560 boards
+  Patch by Stefan Roese, 15 Sep 2005
+
+* Update AMCC Yosemite to get a consistent setup for all AMCC eval
+  boards (baudrate, environment...). Flash driver fixed.
+  Patch by Stefan Roese, 15 Sep 2005
+
+* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
+  ethernet port on ebony.
+  Patch by Stefan Roese, 7 Sep 2005
+
+* Added support for mtddevnum and mtddevname variables (mtdparts command)
+
+* Change default console baud rate for stxxtc board
+
+* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
+  Patch by Stefan Roese, 31 Aug 2005
+
+* Fix default command set (don't include CFG_CMD_DISPLAY command)
+  Patch by Pantelis Antoniou, 02 Sep 2005
+
+* Cleanup
+
+* Enable SM712 driver support for HMI1001 board.
+
+* Fix problems with ld version 2.16 (dot outside sections problem)
+  Pointed out by Gerhard Jaeger, 31 Aug 2005;
+  cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
+
+* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
+
+* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
+
+* Add keyboard and dot matrix display support for HMI1001 board.
+
+* Prepare U-Boot for gcc-4.x
+
+* Fixed Bamboo port to enable running without DDR-DIMM
+  (Bamboo has also 64MB onboard DDR)
+  Patch by Stefan Roese, 24 Aug 2005
+
+* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
+  now handling all 4xx cpu's
+  Patch by Stefan Roese, 16 Aug 2005
+
+* Fix make dependencies for at91rm9200 and ks8695 cpus
+  Patch by Steven Scholz, 23 Aug 2005
+
+* Add JFFS2 support for TQM5200 board
+
+* Add esd cpci5200 and pf5200 boards
+  Patch by Reinhard Arlt, 22 Aug 2005
+
+* Fix sysclock for TQM8540 and TQM8560 boards
+  Patch by Martin Krause, 25 Jul 2005
+
+* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
+  Patch by Martin Krause, 08 Jun 2005
+
+* Add new board specific commands for TQM5200/STK52XX
+  - Sound commands (beep, wav, sound)
+  - Test commands (led, can, backlight, rs232)
+  Patch by Martin Krause, 02 May 2005
+
+* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
+  because of a bug in the AT91RM9200 CPU PLL
+  Patch by Martin Krause, 22 Apr 2005
+
+* Add automatic HW detection for another CMC_PU2 variant
+  Patch by Martin Krause, 20 Apr 2005
+
+* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
+  Patch by Martin Krause, 19 Apr 2005
+
+* Fix initialization problem on TQM5200 without SM501
+  Patch by Martin Krause, 08 Apr 2005
+
+* Add RTC support for STK52XX.200
+  Patch by Martin Krause, 07 Apr 2005
+
+* Add support for IFM o2dnt board
+
+* Enable PCI on hmi1001 board
+
+* Fix return values of the jffs2 commands ls/fsload/fsinfo,
+  so we can use them to, e.g., check the existence of a file with
+  "if ls foo; then this; else that; fi" in the hush shell
+  Patch by Andreas Engel, 16 August 2005
+
+* Coding style cleanup
+
+* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
+  Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
+
+* Check return value of malloc in 440gx_enet.c
+  Patch by Travis B. Sawyer, 18 Jul 2005
+
+* Add Sandburst Metrobox and Sandburst Karef board support packages.
+  Second serial port on 440GX now defined as a system device.
+  Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
+  Patch by Travis B. Sawyer, 12 Jul 2005
+
+======================================================================
+Changes for U-Boot 1.1.3:
+======================================================================
+
+* Minor code cleanup
+
+* Add forgotten new fils from latest VoiceBlue update
+
+* Make bootretry feature work with hush shell.
+  Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
+  Patch by Andreas Engel, 19 Jul 2005
+
+* Update Hymod Board Database PHP code in "tools" directory
+  Patch by Murray Jensen, 01 Jul 2005
+
+* Make "tr" command use POSIX compliant; export HOSTOS make variable
+  Patch by Murray Jensen, 30 Jun 2005
+
+* Fix Murray Jensen's mail address.
+  Patch by Murray Jensen, 30 Jun 2005
+
+* Preserve PHY_BMCR during a soft reset.
+  Patch by Carl Riechers, 24 Jun 2005
+
+* VoiceBlue update: eeprom tool can also store firmware version now.
+  eeprom.bin is runable by jumping at load address.
+  Patch by Ladislav Michl, 23 May 2005
+
+* Move the AT91RM9200DK to the ARM Systems list.
+  Patch by Anders Larsen, 26 Apr 2005
+
+* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
+  Patch by Anders Larsen, 26 Apr 2005
+
+* measure_gclk() is needed when DEBUG is enabled
+  Patch by Bryan O'Donoghue, 25 Apr 2005
+
+* Add UPD-Checksum code, fix problem in net.c (return instead of break)
+  Patch by Reinhard Arlt, 12 Aug 2005
+
+* esd PCI405 board updated
+  Patch by Matthias Fuchs, 28 Jul 2005
+
+* esd WUH405 and DU405 board updated
+  Patch by Matthias Fuchs, 27 Jul 2005
+
+* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
+  Patch by Matthias Fuchs, 4 May 2005
+
+* Update AMCC Yosemite to get a consistent setup for all AMCC eval
+  boards (baudrate, environment...). Flash driver fixed.
+  Patch by Stefan Roese, 11 Aug 2005
+
+* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
+  Patch by Stefan Roese, 11 Aug 2005
+
+* Add NAND FLASH support for AMCC Bamboo 440EP eval board
+  Patch by Stefan Roese, 11 Aug 2005
+
+* Add configuration for IFM AEV FIFO board.
+  Minor coding style cleanup.
+
+* Add configuration for IFM SPI eval board
+
+* Fix CompactFlash problem on HMI1001 board
+
+* Make new "mtdparts" code build with older compilers
+  Patch by Andrea Scian, 09 Aug 2005
+
+* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
+  CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
+  with the 405 defines and the linux kernel defines.
+  Patch by Stefan Roese, 08 Aug 2005
+
+* Fix compiler warnings with older GCC versions
+
+* Add common (with Linux) MTD partition scheme and "mtdparts" command
+
+  Old, obsolete and duplicated code was cleaned up and replace by the
+  new partitioning method. There are two possible approaches now:
+
+  The first one is to define a single, static partition:
+
+  #undef CONFIG_JFFS2_CMDLINE
+  #define CONFIG_JFFS2_DEV		 "nor0"
+  #define CONFIG_JFFS2_PART_SIZE	 0xFFFFFFFF	/* use whole device */
+  #define CONFIG_JFFS2_PART_SIZE	 0x00100000	/* use 1MB */
+  #define CONFIG_JFFS2_PART_OFFSET	 0x00000000
+
+  The second method uses the mtdparts command line option and dynamic
+  partitioning:
+
+  /* mtdparts command line support */
+  #define CONFIG_JFFS2_CMDLINE
+  #define MTDIDS_DEFAULT	 "nor1=zuma-1,nor2=zuma-2"
+  #define MTDPARTS_DEFAULT	 "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
+
+  Command line of course produces bigger images, and may be inappropriate
+  for some targets, so by default it's off.
+
+* Fix build problems for PM856 Board
+
+* Fix sign extension bug in 'fpga loadb' command;
+  make 'fpga loadb' always print the file header info
+  Patch by Andrew Dyer, 11 Jan 2005
+
+* Fix errors that occur when accessing SystemACE CF
+  Patch by Jeff Angielski, 09 Jan 2005
+
+* Document switching between U-Boot and PlanetCore on RPXlite
+  by Sam Song, 24 Dec 2004
+
+* Fix PowerQUICC II mask detection.
+  Patch by Eugene Surovegin, 20 Dec 2004
+
+* Add support for Altera NIOS DK1C20 board
+  Patch by Shlomo Kut, 13 Dec 2004
+
+* Add support for ep8248 board
+  Patch by Yuli Barcohen, 12 Dec 2004
+
+  Minor code cleanup.
+
+* Fix baudrate setting for KGDB on MPC8260
+  Patch by HoJin, 11 Dec 2004
+
+* Fix 'mii help' text formatting
+  Patch by Cory Tusar, 10 Dec 2004
+
+* Fix return code of NFS command
+  Patch by Hiroshi Ito, 11 Dec 2004
+
+* Fix typo
+
+* Fix compiler warnings in cpu/ppc4xx/usbdev.c
+  Patch by Steven Blakeslee, 04 Aug 2005
+
+* Add support for AMCC Bamboo PPC440EP eval board
+  Patch by Stefan Roese, 04 Aug 2005
+
+* Patch by Jon Loeliger
+  Fix style issues primarily in 85xx and 83xx boards.
+    - C++ comments
+    - Trailing white space
+    - Indentation not by TAB
+    - Excessive amount of empty lines
+    - Trailing empty lines
+
+* Patch by Ron Alder, 11 Jul 2005
+    Add Xianghua Xiao and Lunsheng Wang's support for the
+    GDA MPC8540 EVAL board.
+
+* Patch by Eran Liberty
+  Add support for the Freescale MPC8349ADS board.
+
+* Patch by Jon Loeliger, 25 Jul 2005
+  Move the TSEC driver out of cpu/mpc85xx as it will be shared
+  by the upcoming mpc83xx family as well.
+
+* Patch by Jon Loeliger, 05 May 2005
+  Implemented support for MPC8548CDS board.
+  Added DDR II support based on SPD values for MPC85xx boards.
+  This roll-up patch also includes bugfies for the previously
+  published patches:
+    DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
+
+* Patch by Jon Loeliger, 10 Feb 2005
+  Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
+
+* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
+  For MPC85xxCDS:
+    Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
+    for faster flash parts.
+    Add documentation for BR/OR for FLASH.
+
+* Patch by Jon Loeliger 08 Feb 2005
+  Determine L2 Cache size dynamically on 85XX boards.
+
+* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
+  - Convert the CPM2 based functionality to use new CONFIG_CPM2
+    option rather than a myriad of CONFIG_MPC8560-like variants.
+    Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
+    Eliminates the CONFIG_MPC8560 option entirely.  Distributes the
+    new CONFIG_CPM2 option to each 8260 board.
+
+* Add support for MicroSys PM856 board
+  Patch by Josef Wagner, 03 Aug 2005
+
+* Minor fixes to PM854 board
+  Patch by Josef Wagner, 03 Aug 2005
+
+* Adjust configuration of XENIAX board
+  (chip select and GPIO required for USB operation)
+
+* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
+  routed to the Watchdog handler
+  Patch by Eugene Surovegin, 18 Jun 2005
+
+* (re)enabled scsi commands do_scsi() and do_scsiboot()
+  Patch by Denis Peter, 06 Dec 2004
+
+* Fix endianess problem in TFTP / NFS default filenames
+  Patch by Hiroshi Ito, 06 Dec 2004
+
+* Ignore broadcast status bit in received frames in 8260 FCC ethernet
+  loopback test code
+  Patch by Murray Jensen, 18 Jul 2005
+
+* Fix typo in mkconfig script (used == instead of =)
+  Patch by Murray Jensen, 18 Jul 2005
+
+* Cleanup build problems on 64 bit build hosts
+
+* Update MAINTAINERS file
+
+* Patch by Stefan Roese, 01 Aug 2005:
+  - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
+    (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
+    for details.
+  - Sycamore (PPC405GPr) eval board added (Walnut port is extended
+    to run on both 405GP and 405GPr eval boards).
+
+* Patch by Steven Blakeslee, 27 Jul 2005:
+  - Add support for AMCC PPC440EP/GR.
+  - Add support for AMCC Yosemite PPC440EP eval board.
+  - Add support for AMCC Yellowstone PPC440GR eval board.
+
+* Minor fixes for PPChameleon Board:
+  - fix alignment of NAND size
+  - make code do what the comment says
+
+* Implement h/w sector protection status synchronization at boot.
+  The code is provided for, and was tested on, the Yukon/Alaska
+  and PM520 boards only.
+
+  A bug in flash_real_protect() for the Yukon board was fixed by
+  adding a function that tells if two banks are on one flash chip.
+
+* Fix sysmon POST problem: check I2C error codes
+  This fixes a problem of displaying bogus voltages when the voltages
+  are so low that the I2C devices start failing while the rest of the
+  system keeps running.
+
+* Patch by Cedric Vincent, 6 Jul 2005:
+  Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
+
+* Patch by Jon Loeliger, 20 Jul 2005:
+  Add missing PCI IO port definitions.
+
+* Add CompactFlash support for HMI1001 board.
+
+* Adjust printed board ID for LWMON board.
+
+* Fix low-level OHCI transfers for ARM920t and MPC5xxx
+
+* Add new argument format for flash commands to allow for usage like
+  "erase $(addr) +$(filesize)", i. e. a size argument can be used and
+  U-Boot will automaticially find the end of the corresponding sector.
+
+* Patch by Stefan Roese, 5 Jul 2005:
+  Update uc100 board PHY setup
+
+* Patch by Stefan Roese, 1 Jul 2005:
+  Fix PHY address for CATcenter board (now correct!)
+
+* Patch by Stefan Roese, 30 Jun 2005:
+  Fix PHY addresses for PPChameleon and CATcenter boards
+  Change MAINTAINER for most esd boards
+
+* Patch by Detlev Zundel, 30 Jun 2005:
+  Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
+
+* Fix baudrate calculation problem on MPC5200 systems
+
+* Add EEPROM and RTC support for HMI1001 board
+
+* Patch by Detlev Zundel, 20 Jun 2005:
+  Fix initialization of low active GPIO pins on inka4x0 board
+
+* Enable redundant environment, disable HW flash protection of
+  HMI1001 board
+
+* Patch by Travis Sawyer, 10 Jun 2005:
+  Initialize allocated dev and private hw structures
+  after their respective allocation in 440gx_enet.c
+
+* Patch by Steven Scholz, 10 Jun 2005:
+  Fix byteorder problems with second argument of "bootm" with
+  standalone images;
+
+* Add support for HMI1001 board
+
+* Disable "date" and "sntp" commands on TQM866M
+
+* Fix watchdog reset problems on LWMON board
+
+* Patch by Juergen Selent, 17 May 2005:
+  Add support for Funkwerk VoVPN gateway module.
+
+* Cleanup debug code for MPC8220 FEC driver
+
+* Extend burst mode RAM test program to take a loop count
+  (0 = infinite)
+
+* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
+  those boards that use it.
+
+* Patches by Greg Ungerer, 19 May 2005:
+  - add support for the KS8695P (ARM 922 based) CPU
+  - add support for the OpenGear CM4008, CM4116 and CM4148 boards
+
+* Patch by Steven Scholz, 19 May 2005:
+  Add support for CONFIG_SERIAL_TAG on ARM boards
+
+* Add PCI support for Sorcery board.
+  Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
+
+* Fix compile problems caused by new burst mode SDRAM test;
+  make port pins to trigger logic analyzer configurable
+
+* Fix timer handling on MPC85xx systems
+
+* Fix debug code in omap5912osk flash driver
+
+* Add support for MPC8247 based "IDS8247" board.
+
+* Add support for 2 x TSEC interfaces on the TQM8540 board.
+
+* On LWMON we must use the watchdog to reset the board as the CPU
+  genereated HRESET pulse is too short to reset the external
+  circuitry.
+
+* Add test tool to exercise SDRAM accesses in burst mode
+  (as standalone program, MPC8xx/PowerPC only)
+
+* Increase CFG_MONITOR_LEN for Rattler board to match actual code
+  size.
+
+* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
+  March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
+  added to support LZO and LZARI compression modes (undefined by
+  default).
+
+* Fix problem with symbolic links in JFFS2 code.
+
+* Use linker ASSERT statement to prevent undetected overlapping of
+  sections on PPChameleon board; other boards might use this, too.
+
+* Patch by Stefan Roese, 03 May 2005:
+  Update for P3G4
+  Fix problems in cmd_universe.c
+
+* Patch by Matthias Fuchs, 03 May 2005:
+  Added missing variable declaration in cmd_nand.c
+  Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
+
+* Fix INKA4x0: use CS1 as gpio_wkup_6 output
+
+* Fix bug in the SDRAM initialization code for canmb, IceCube and
+  PM520 boards.
+  Fix PHY address for canmb board.
+
+* Cleanup serial console baudrate calculation on AT91RM9200;
+  get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
+
+* Patch by Matthias Fuchs, 18 Apr 2005:
+  Make PCI target address spaces on PMC405 and CPCI405 boards
+  configurable via environment variables
+
+* Auto-size RAM on canmb board.
+
+* Add support for canmb board
+
+* Patch by Stefan Roese, 13 Apr 2005:
+  Update for esd apc405
+
+* Fixes for TQM8560 board:
+  - fix clock rates
+  - remove debug messages
+  - fix flash sector protection
+
+* Patch by Steven Scholz, 07 Apr 2005:
+  Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
+
+* Patches by Steven Scholz, 07 Apr 2005:
+  Fix compiler warning in altera.c
+  Fix warning in cpu/arm920t/at91rm9200/i2c.c
+
+* Patch by Ladislav Michl, 06 Apr 2005:
+  Fix voiceblue configuration.
+
+* Patch by Stefan Roese, 06 Apr 2005:
+  Updates for OCOTEA board:
+  - Changed U-Boot size from 512kByte to 256kByte
+  - Fixed flash driver to support boot from soldered user flash
+  - Added README for switch from PIBS firmware to U-Boot
+
+* Patch by Travis Sawyer, 05 Apr 2005:
+  - Change timer frequency for ppc 440 from 10 ms to 1 ms.
+    Problem found by Andrew Wozniak.
+
+* Patch by Steven Scholz, 06 Apr 2005:
+  - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
+  - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
+
+* Patches by Robert Whaley, 29 Nov 2004:
+  - update the pxa-regs.h file for PXA27x chips
+  - add PXA27x based ADSVIX board
+  - add support for MMC on PXA27x processors
+
+* Patch by Andrew E. Mileski, 28 Nov 2004:
+  Fix PPC4xx SPD SDRAM detection bug
+
+* Patch by Hiroshi Ito, 26 Nov 2004:
+  Fix logic of "test -z" and "test -n" commands
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+  Add support for VoiceBlue board.
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+  Fix netboot_common() prototypes.
+
+* Patch by Steven Scholz, 05 Apr 2005:
+  Use i.MX watchdog timer for reset_cpu()
+
+* Patch by Steven Scholz, 05 Apr 2005:
+  Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
+  subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
+  (now in interupts.c)
+
+* Add support for MPC8220 based "sorcery" board.
+
+* Add support for TQM8560 board.
+
+* Add FEC support for TQM8540 board.
+  Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
+
+* Patch by Martin Krause, 04 Apr 2005:
+  Update default configuration for CMC_PU2 board.
+
+* Patch by Steven Scholz, 04 Apr 2005:
+  - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
+  - introduce two new configuration options instead:
+    CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
+
+* Patch by Steven Scholz, 04 Apr 2005:
+  Make sure that MDIO clock does not exceed 2.5 MHz on AT91
+
+* Fix timer code for ARM systems: make sure that udelay() does not
+  reset timers so it's save to use udelay() in timeout code.
+
+* Patch by Mathias Küster, 23 Nov 2004:
+  add udelay support for the mcf5282 cpu
+
+* Patch by Tolunay Orkun, 16 November 2004:
+  fix incorrect onboard Xilinx CPLD base address
+
+* Patch by Jerry Van Baren, 08 Nov 2004:
+  - Add low-boot option for MPC8260ADS board (if lowboot is selected,
+    the jumper for the HRCW source should select flash. If lowboot is
+    not selected, the jumper for the HRCW source should select the
+    BCSR.
+  - change default load base address to 0x00400000
+
+* Patch by Yuli Barcohen, 08 Nov 2004:
+  Add support for Analogue & Micro Rattler boards.
+  Tested on Rattler8248.
+
+* Patch by Andre Renaud, 08 Nov 2004:
+  Fix watchdog support in common/lcd.c
+
+* Patch by Marc Leeman, 05 Nov 2003:
+  Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
+  bug only affects the XPC8245 processors
+
+* Patches by Josef Wagner, 29 Oct 2004:
+  - Add support for MicroSys CPU87 board
+  - Add support for MicroSys PM854 board
+
+* Patch by Jian Zhang, 02 Nov 2004:
+  Add 16-bit NAND support
+
+* Patch by Scott McNutt, 01 Nov 2004:
+  Add missing NIOS/NIOS2 support for "iminfo" command
+
+* Patch by Detlev Zundel, 29 Oct 2004:
+  Add missing NIOS/NIOS2 support for "mkimage" tool.
+
+* Patch by David Adair, 27 Oct 2004:
+  Add missing 440GX SDRAM Controller reset
+
+* Patch by Steven Scholz, 25 Oct 2004:
+  Declare reset_cpu() in include/common.h instead locally
+
+* Patch by Yusdi Santoso, 22 Oct 2004:
+  - Add support for HIDDEN_DRAGON board
+  - fix endianess problem in driver/rtl1839.c
+
+* Patch by Allen Curtis, 21 Oct 2004:
+  support multiple serial ports
+
+* Patch by Richard Klingler, 03 Apr 2005:
+  Add call to eth_halt() in net/net.c when called functions fail
+  after eth_init() has been called.
+
+* Patch by Sam Song, 3 April 2005:
+  - Update README.Netconsole
+  - Update README
+
+* Prepare for SoC rework of ARM code:
+  - rename CONFIG_BOOTBINFUNC into  CONFIG_INIT_CRITICAL
+  - rename memsetup into lowlevel_init (function name and source files)
+  Patch by Steven Scholz, 03 Apr 2005:
+  - create SoC specific directories include/asm-arm/arch-imx and
+    include/asm-arm/arch-s3c24x0
+
+* Fix problems with SNTP support;
+  enable SNTP support in some boards.
+
+* Patches by Martin Krause, 01 Apr 2005:
+  - Fix flash erase timeout on CMC_PU2
+  - Add automatic HW detection for CMC_PU2 and CMC_BASIC
+
+* Patch by Steven Scholz, 13 March 2005:
+  fix cache enabling for AT91RM9200
+
+* Patch by Masami Komiya, 30 Mar 2005:
+  add SNTP support and expand time server and time offset fields of
+  DHCP support. See doc/README.SNTP
+
+* Patch by Steven Scholz, 13 Dec 2004:
+  Fix bug in at91rm920 ethernet driver
+
+* Patch by Steven Scholz, 13 Dec 2004:
+  Remove duplicated code by merging memsetup.S files for
+  at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
+
+* Patch by Detlev Zundel, 31 Mar 2005:
+  Cleanup duplicate definition of overwrite_console()
+
+* Update TQM5200 configuration;
+  prepare for Rev. 200 starter kit boards
+
+* Patch by Scott McNutt, 21 Oct 2004:
+  Add support for Nios-II EPCS Controller core.
+
+* Patch by Scott McNutt, 20 Oct 2004:
+  Nios-II cleanups:
+  - Add sysid command (Nios-II only).
+  - Locate default exception trampoline at proper offset.
+  - Implement I/O routines (readb, writeb, etc)
+  - Implement do_bootm_linux
+
+* Patches by Martin Krause, 22 Mar 2005:
+  - use TQM5200_auto as MAKEALL target for TQM5200 systems
+  - add support for SM501 graphics controller
+  - add support for graphic console on TQM5200
+  - add support for TQM5200 Rev 200
+  - cleanup, fix typo in include/configs/TQM5200.h
+
+* Patch by Manfred Baral, 17 Mar 2005:
+  Fix typo
+
+* Fix RTC configuration for PPChameleon board
+
+* Cleanup, fix typo in include/configs/TQM5200.h
+
+* Patch by Stefan Roese, 16 Mar 2005:
+  Update for esd auto_update and hh405 board
+
+* Adapt for U-Boot image size (new features enabled) on TQM5200
+
+* Update code for TQM8540 board (and 85xx in general):
+  - Change the name of the Ethernet driver: MOTO ENET -> ENET
+  - Reformat boot messages
+  - Enable redundant environment
+  - Replace the -O2 optimization flag with -mno-string
+
+* Patch by David Brownell, 10 Mar 2005:
+  Restore copyright statements in OHCI drivers.
+
+* Add support for TQM8540 board
+
+* Patch by Detlev Zundel, 14 Mar 2005:
+  NC650: changed NAND flash addressing to using UPMB
+
+* Patch by Stefan Roese, 14 Mar 2005:
+  Update for esd voh405 fpga image
+
+* INKA4x0: Allow initialization of LCD backlight dimming from
+  "brightness" environment variable.
+
+* Add port initialization for digital I/O on INKA4x0
+
+* Patch by Stefan Roese, 01 Mar 2005:
+  Update for esd boards dp405 and hub405
+
+* Fix get_partition_info() parameter error in all other calls
+  (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
+
+* Enable USB and IDE support for INKA4x0 board
+
+* Patch by Andrew Dyer, 28 Feb 2005:
+  fix ext2load passing an incorrect pointer to get_partition_info()
+  resulting in load failure for devices other than 0
+
+* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
+
+* Cleanup USB and partition defines
+
+* Add support for ext2 filesystems and image timestamps to TQM5200 board
+
+* Add reset code for Coral-P on INKA4x0 board
+
+* Patch by Martin Krause, 28 Jun 2004:
+  Update for TRAB board.
+
+* Fix some missing "volatile"s in MPC5xxx FEC driver
+
+* Fix cirrus voltage detection (for CPC45)
+
+* Fix byteorder problem in usbboot and scsiboot commands.
+
+* Patch by Cajus Hahn, 04 Feb 2005:
+  - don't insist on leading '/' for filename in ext2load
+  - set default partition to useful value (1) in ext2load
+
+* Patch by Andrew Dyer, 08 Jan 2005:
+  fix wrong return codes in ext2 code
+
+* Removed '--no-warn-mismatch' option from Makefile. This option
+  makes 'ld' to overlook binary objects compatibility.
+
+* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
+  --end-group) outside of the group. This will make 'ld' to do
+  _multiple_ search in the library group when resolving symbol
+  references and do only a _single_ seach in libgcc.a after the group
+  search.
+
+* Fix stability problems on CPC45 board again.
+
+* Make image detection for diskboot / usbboot / scsiboot more robust
+  (also check header checksum)
+
+* Update CPC45 board configuration.
+
+* Add USB and PCI support for INKA4x0 board
+
+* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
+
+* Code cleanup
+
+* Patch by Robin Getz, 13 Oct 2004:
+  Add standalone application to change SMC91C111 MAC addresses,
+  see examples/README.smc91111_eeprom
+
+* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
+  Fix Flash support for ARM Integrator CP.
+
+* Patch by Richard Woodruff, 10 Jan 2005:
+  Update support for OMAP2420 (ARM11) and H4 board:
+  o clean up and add new types to H4 memory probe code.
+  o fix to work with internal boot.
+  o added PRCM config III operation.
+  o fix marginal flash timings.
+  o add revison ATAG usage.
+  o enable voltage scaling at power chip.
+  o fix compile error for i2c.
+
+* Fix network problem (error when receiving multiple ARP packets)
+
+* Patch by Daniel Poirot, 12 Oct 2004:
+  Add support for Wind River sbc405 board
+
+* Patch by Rainer Brestan, 12 Oct 2004:
+  Make examples/Makefile more robust
+
+* Patch by Sam Song, 11 October 2004:
+  - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
+  - Adjust CPU:BUS frequency ratio 1:1 when core frequency
+    less than 50MHz
+
+* Patch by Sam Song, 10 Oct 2004:
+  Fix a parameter error in run_command() in main.c
+
+* Patch by Richard Woodruff, 01 Oct 2004:
+  add support for the TI OMAP2420 processor and its H4 reference
+  board
+
+* Patch by Christian Pellegrin, 24 Sep 2004:
+  Added support for NE2000 compatible (DP8390, DP83902) NICs.
+
+* Patch by Leif Lindholm, 23 Sep 2004:
+  add support for the AMD db1550 board
+
+* Patch by Travis Sawyer, 15 Sep 2004:
+  Add CONFIG_SERIAL_MULTI support for ppc4xx,
+  update README.serial_multi
+
+* Patches by David Snowdon, 07 Sep 2004:
+  - add u-boot.hex target in the top level Makefile
+  - add support for the UNSW/NICTA PLEB 2 board (pleb2)
+  - use -mtune=xscale and -march=armv5 options for PXA
+
+* Patch by Florian Schlote, 08 Sep 2004:
+  Add support for SenTec-COBRA5272-board (ColdFire).
+
+* Patch by Gleb Natapov, 07 Sep 2004:
+  mpc824x: set PCI latency timer to a sane value
+  (is 0 after reset).
+
+* Patch by Kurt Stremerch, 03 Sep 2004:
+  Add bitstream configuration option for fpga command (Xilinx only).
+
+* Patch by Kurt Stremerch, 03 Sep 2004:
+  Add Xilinx Spartan2E family FPGA support
+
+* Patch by Jeff Angielski, 02 Sep 2004:
+  Add Added support for H2 revision of the EP8260 board.
+  Fixed formatting for some of the EP8260 related source files.
+
+* Patch by Jon Loeliger, 02 Sep 2004:
+  Reset monitor size back to 256 so environment can be written
+  to flash on MPC85xx ADS and CDS releases.
+
+* Patch by Paolo Broggini, 02 Sep 2004:
+  Make BSS clearing on ARM systems more robust
+
+* Patch by Yue Hu and Joe, 01 Sep 2004:
+  - add PCI support for ixp425;
+  - add EEPRO100 suppor tfor ixdp425 board.
+
+* Fix problem with protected sector detection in driver/cfi_flash.c
+
+======================================================================
+Changes for U-Boot 1.1.2:
+======================================================================
+
+* Code cleanup, mostly for GCC-3.3.x
+
+* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
+  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
+  additional ethernet addresses.
+
+* Cleanup drivers/i82365.c - avoid duplication of code
+
+* Fix bogus "cannot span across banks" flash error message
+
+* Code cleanup
+
+* Add support for CompactFlash for the CPC45 Board.
+
+* Fix problems with CMC_PU2 flash driver.
+
+* Cleanup:
+  - avoid trigraph warning in fs/ext2/ext2fs.c
+  - rename UC100 -> uc100
+
+* Add support for UC100 board
+
+* Patch by Stefan Roese, 16 Dez 2004:
+  - ext2fs support added
+  - Tundra universe support added
+  - ColdFire MCF5249 support added (no preloader needed!)
+  - MCF5249 board TASREG added
+  - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
+    VOM405, WUH405
+  - some esd boards updated
+  - memory commands "mdc" and "mwc" added for cyclic read/write
+    (CONFIG_MX_CYCLIC, see README for further description)
+
+* Add support for INKA4X0 board
+
+* Patch by Steven Scholz, 12 Dec 2004:
+  Fix typo in AT91 memory setup.
+
+* Patch by Martin Krause, 27 Oct 2004:
+  - add support for "STK52xx" board (including PS/2 multiplexer)
+  - add hardware detection for TQM5200
+
+* Clean up CMC PU2 flash driver
+
+* Update MAINTAINERS file
+
+* Fix bug in MPC823 LCD driver
+
+* Fix udelay() on AT91RM9200 for delays < 1 ms.
+
+* Enable long help on CMC PU2 board;
+  fix reset issue;
+  increase CPU speed from 179 to 207 MHz.
+
+* Fix smc91111 ethernet driver for Xaeniax board (need to handle
+  unaligned tail part specially).
+
+* Update for AT91RM9200DK and CMC_PU2 boards:
+  - Enable booting directly from flash
+  - fix CMC_PU2 flash driver
+
+* Fix mkimage usage message
+
+* Map SRAM on NC650 board
+
+* Work around for Ethernet problems on Xaeniax board
+
+* Patch by TsiChung Liew, 23 Sep 2004:
+  - add support for MPC8220 CPU
+  - Add support for Alaska and Yukon boards
+
+* Fix configuration for ERIC board (needs more room)
+
+* Adjust MIPS compiler options at run-time depending on tools version
+  ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
+  "-mcpu=4kc" for old tools)
+
+* Add passing of the command line and memory size information to  the
+  kernel on xaeniax board.
+
+* Enable NAND flash support for NC650 board.
+
+* Patch by Thomas Lange 07 Oct 2004:
+  Updated README for DBAu1x00 boards to match current status
+
+* Patch by Philippe Robin, 28 Sept 2004:
+  Fix Flash support for Versatile.
+
+* Patch by Roger Blofeld, 16 Sep 2004:
+  Fix timeout for DHCP command retry
+
+* Patch by Pantelis Antoniou, 14 Sep 2004:
+  Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
+
+* Patch by Pantelis Antoniou, 14 Sep 2004:
+  Kick watchdog when bz-decompressing
+
+* Fix CFG_HZ problems on AT91RM9200 systems
+  [Remember: CFG_HZ should be 1000 on ALL systems!]
+
+* Patch by Gridish Shlomi, 30 Aug 2004:
+  - Add support to revA version of PQ27 and PQ27E.
+  - Reverted MPC8260ADS baudrate back to original 115200
+
+* Patch by Hojin, 17 Sep 2004:
+  Fix typo in cfi_flash.c
+
+* Patch by Mark Jonas, 09 September 2004:
+  mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
+  error message
+
+* Patch by Mark Jonas, 31 August 2004:
+  Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
+  improves FTP performance for MPC5200 systems. Enabled for IceCube
+  by default.
+
+* Patch by Michael Bendzick, 30 Aug 2004:
+  - Improve platform.S code for omap1510inn that detects whether code
+    is running from SDRAM or not. Patch allows SDRAM to be configured
+    if code is running out of SRAM at 0x20000000.
+
+* Patch by Frederick Klatt, 30 Aug 2004:
+  Add support for the Wind River SBC8540/SBC8560 boards
+
+* Configure SX1 board to use drivers/cfi_flash.c
+
+* Patches by Michael Bendzick, 30 Aug 2004:
+  - Configure omap1510inn board to use drivers/cfi_flash.c
+  - Make drivers/cfi_flash.c protect environment and redundant
+    environment.
+
+* Patch by Steven Scholz, 23 Jun 2004:
+  - Add script (tools/img2brec.sh) to programm U-Boot into
+    (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
+
+* Patches by Scott McNutt, 24 Aug 2004:
+  - Add support for Altera Nios-II processors.
+  - Add support for Psyent PCI-5441 board.
+  - Add support for Psyent PK1C20 board.
+
+* Patches by Jon Loeliger, 24 Aug 2004:
+  - Add support for the MPC8541 and MPC8555 CDS boards
+  - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
+  - Convert MPC85xxADS to use common CFI flash driver
+  - Fix PCI window on MPC85xx; remove unneeded PCI initialization
+    from board_early_init_f()
+  - Provide SW workaround for PCI initialization on 85xx CDS
+
+* Patches by George G. Davis, 24 Aug 2004:
+  - Enable ramdisk/initrd tagged param support for omap1610h2_config
+  - Remove static network setup defaults from mx1ads_config
+  - update ARM boards to use constants from mach-types.h
+
+* Patch by Gary Jennejohn, 04 Oct 2004:
+  - fix I2C on at91rm9200
+  - add support for Ricoh RS5C372A RTC
+
+* Patch by Gary Jennejohn, 01 Oct 2004:
+  - add support for CMC PU2 board
+  - add support for I2C on at91rm9200
+
+* Patch by Gary Jennejohn, 28 Sep 2004:
+  fix baudrate handling on at91rm9200
+
+* Patch by Yuli Barcohen, 22 Aug 2004:
+  - remove ZPC.1900 board-specific flash driver;
+    switch the port to generic CFI driver;
+  - port clean-up
+
+* Patch by Hinko Kocevar, 21 Aug 2004:
+  Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
+
+* Clean up tools/bmp_logo.c to not add trailing white space
+
+* Patch by Hinko Kocevar, 21 Aug 2004:
+  - Group common framebuffer functions in common/lcd.c
+  - Group common framebuffer macros and #defines in include/lcd.h
+  - Provide calc_fbsize() for video ATAG
+
+* Patch by Sam Song, 21 August 2004:
+  - Fix a typo in README
+  - Align "(RO)" output for "flinfo" after "protect on"
+  - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
+    ratio 1:1 when core frequency less than 50MHz
+
+* Patches by Hinko Kocevar, 21 Aug 2004:
+  - fix some "use of label at end of compound statement" warnings
+  - Define type of LCD panel on lubbock board if CONFIG_LCD is used
+
+* Patch by Steven Scholz, 16 Aug 2004:
+  - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
+  - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
+  - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
+  - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
+    into cpu/arm920t/$(SOC)/
+
+* Patches by Sean Chang, 09 Aug 2004:
+  - Added support for both 8 and 16 bit mode access to System ACE CF
+    through MPU.
+  - Fixed missing System ACE CF device during get FAT partition info
+    in fat_register_device function.
+  - Enabled System ACE CF support on ML300.
+
+* Patch by Sean Chang, 09 Aug 2004:
+  Synch defines for saveenv and do_saveenv functions so they get
+  compiled under the same statement.
+
+* Patch by Sean Chang, 09 Aug 2004:
+  - Added I2C support for ML300.
+  - Added support for ML300 to read out its environment information
+    stored on the EEPROM.
+  - Added support to use board specific parameters as part of
+    U-Boot's environment information.
+  - Updated MLD files to support configuration for new features
+    above.
+
+* Patches by Travis Sawyer, 05 Aug 2004:
+  - Remove incorrect bridge settings for eth group 6
+  - Add call to setup bridge in ppc_440x_eth_initialize
+  - Fix ppc_440x_eth_init to reset the phy only if its the
+    first time through, otherwise, just check the phy for the
+    autonegotiated speed/duplex.  This allows the use of netconsole
+  - only print the speed/duplex the first time the phy is reset.
+
+* Patch by Shlomo Kut, 29 Mar 2004:
+  Add support for MKS Instruments "Quantum" board
+
+* Fix build problem with Cogent boards;
+  avoid using <asm/byteorder.h> when using the host compiler
+
+* Patch by Ganapathi C, 04 Aug 2004:
+  Fix NFS timeout issue
+
+* Patch by Yuli Barcohen, 19 Jul 2004:
+  - Fix host tools building in Cygwin environment
+  - Fix header files search order for host tools
+
+* Patch by Tom Armistead, 19 Jul 2004:
+  Fix kgdb.S support for 74xx_75x cpu
+
+* Patch by Jon Loeliger, 15 Jul 2004:
+  Fix MPC85xx I2C driver
+
+* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
+
+* Patch by Stephen Williams, 15 July 2004
+  Set the PCI class code for JSE board as part of PCI interface setup
+
+* Patch by Michael Bendzick, 15 Jul 2004:
+  Fix problem with writes with odd sizes in drivers/cfi_flash.c when
+  CFG_FLASH_USE_BUFFER_WRITE is set
+
+* Patch by Yuli Barcohen, 13 Jul 2004:
+  Allow clock setting on MPC866/MPC885 series chips according to
+  environment variable `cpuclk'
+
+* Patch by Yuli Barcohen, 20 Apr 2004:
+  Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
+
+* Patch by Vincent Dubey, 24 Sep 2004:
+  Add support for xaeniax board
+
+* Add comment about non-GPL character of standalone applications to
+  COPYING file
+
+* Fix FEC ethernet problem on NSCU board.
+
+* Patch by Gary Jennejohn, 09 Sep 2004:
+  allow to use USART1 as console port on at91rm9200dk boards
+
+* Patch by Stefan Roese, 16 Sep 2004:
+  Update AR405 board.
+
+* Fix SysClk handling for PPChameleon and CATcenter boards
+
+* Patch by Detlev Zundel, 08 Sep 2004:
+  Update etags build target
+
+* Improve NetConsole support: add support for broadcast destination
+  address and buffered input.
+
+* Cleanup compiler warnings for GCC 3.3.x and later
+
+* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
+
+* Add support for IDS "NC650" board
+
+* Add automatic update support for LWMON board
+
+* Clear Block Lock-Bits when erasing flash on LWMON board.
+
+* Fix return code of "fatload" command
+
+* Enable MSDOS/VFAT filesystem support for LWMON board
+
+* Patch by Martin Krause, 03 Aug 2004:
+  change timing for SM501 graphics controller on TQM5200 module
+
+* Patch by Mark Jonas, 13 July 2004:
+  - Total5200 LCD now run in little endian mode. Endianess conversion
+    is done in hardware.
+  - Removed last reference to "console" environment variable.
+
+* Patches by Lars Munch, 12 Jul 2004:
+  - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
+    board specific
+  - split out the LXT971A PHY from ns_9750_eth.h
+  - split the dm9161 phy part out of at91rm9200_ether.c
+
+* Patch by Andreas Engel, 12 Jul 2004:
+  Replaced hardcoded PL011 clock frequency with config variable.
+  Fixed wrong CONFIG_CMD_DFL doc.
+
+* Patch by Thomas Viehweger, 09 Jun 2004:
+  make it possible to remove chpart when there is only one partition
+
+* Add support for console over UDP (compatible to Ingo Molnar's
+  netconsole patch under Linux)
+
+* Patch by Jon Loeliger, 16 Jul 2004:
+  - support larger DDR memories up to 2G on the PC8540/8560ADS and
+    STXGP3 boards
+  - Made MPC8540/8560ADS be 33Mhz PCI by default.
+  - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
+    and CONFIG_L2_INIT_RAM options.
+  - Refactor Local Bus initialization out of SDRAM setup.
+  - Re-implement new version of LBC11/DDR11 errata workarounds.
+  - Moved board specific PCI init parts out of CPU directory.
+  - Added TLB entry for PCI-1 IO Memory
+  - Updated README.mpc85xxads
+
+* Patch by Sascha Hauer, 28 Jun:
+  - add generic support for Motorola i.MX architecture
+  - add support for mx1ads, mx1fs2 and scb9328 boards
+
+* Patches by Marc Leeman, 23 Jul 2004:
+  - Add define for the PCI/Memory Buffer Configuration Register
+  - corrected comments in cpu/mpc824x/cpu_init.c
+
+* Add support for multiple serial interfaces
+  (for example to allow modem dial-in / dial-out)
+
+* Patch by Stefan Roese, 15 Jul 2004:
+  cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
+
+* Fix NSCU config; add ethernet wakeup code.
+
+* Add link for preloader for Motorola ColdFire to README.m68k
+
+* Patch by Michael Bendzick, 12 Jul 2004:
+  fix output formatting in drivers/cfi_flash.c
+
+* Patch by Mark Jonas, 02 Jul 2004:
+  Fix lowboot (again) on MPC5xxx
+
+* Patch by Curt Brune, 07 Jul 2004:
+  relocate exception vectors on arm720t if needed
+
+* Patch by George G. Davis, 06 Jul 2004:
+  - update mach-types.h to latest arm.linux.org.uk master list
+  - Set correct OMAP1610 bi_arch_number for build target
+
+* Patch by Curt Brune, 06 Jul 2004:
+  evb4510: add support for timer interrupt; cleanup
+
+* Patch by Dan Poirot, 06 Jul 2004:
+  Fix sbc8260 environment variables
+
+* Cleanup redundand "console" environment variable
+
+* Patch by Mark Jonas, 05 Jul 2004:
+  add support for the Total5100's and Total5200's LCD screen
+
+* Patches by Dan Eisenhut, 01 Jul 2004:
+  - README fixes.
+  - Move doc2000.h include to prevent compiler warning on some boards
+
+* Patch by Mark Jonas, 01 Jul 2004:
+  Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
+  MGT5100 and MPC5200 based Freescale platforms.
+
+* Patch by Philippe Robin, 01 Jul 2004:
+  Add initialization for Integrator and versatile board files.
+
+* Patch by Hinko Kocevar, 01 Jun 2004:
+  Fix VFD FB allocation, add LCD FB allocation on ARM
+
+* Patch by Martin Krause, 30 Jun 2004:
+  Add support for TQM5200 board
+
+* Patch by Martin Krause, 29 Jun 2004:
+  Add loopw command: infinite write loop on address range
+
+* Patches by Yasushi Shoji, 29 Jun 2004:
+  - add empty include/asm-microblaze/processor.h
+  - add to CREDITS and MAINTAINERS
+  - add gd initialization
+  - add MicroBlaze and SUZAKU board to MAKEALL script
+  - add reset support for SUZAKU
+  - add flush_cache() for MicroBlaze
+  - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
+    size flash memory on SUZAKU
+
+* Patch by Prakash Kumar, 27 Jun 2004:
+  Add support for the PXA250 based Intrinsyc Cerf board.
+
+* Patch by Yasushi Shoji, 27 Jun 2004:
+  fix comment in include/common.h
+
+* Rename SBC8560 into sbc8560 for consistency
+
+* Patch by Daniel Poirot, 24 Jun 2004:
+  Add support for Wind River's sbc8240 board
+
+* Patches by Yasushi Shoji, 26 Jun 2004:
+  - drivers/serial_xuartlite.c: fix "return 0" in void function
+  - add microblaze support to mkimage tool
+
+* Patch by Fred Klatt, 25 Jun 2004:
+  Add support for WindRiver's sbc8560 board
+
+* Patch by Nicolas Lacressonniere, 24 Jun 2004
+  Small Bugs fixes for "at91rm9200dk" board:
+  - Timing modifications for SPI DataFlash access
+  - Fix NAND flash detection bug
+
+* Patch by Nicolas Lacressonniere, 24 Jun 2004:
+  Add Support for Flash AT49BV6416 for AT91RM9200DK board
+
+* Patch by Jon Loeliger, 17 June 2004:
+  Completion of the 8540ADS/8560ADS updates:
+  Fix some PCI and Rapid I/O memory maps,
+  Initialize both TSEC 1 and 2,
+  Initialize SDRAM
+  Update MAINTAINER for 85xx boards and README.mpc85xxads
+
+* Patch by Yuli Barcohen, 16 Jun 2004:
+  Remove obsolete AdderII port which was superseded by unified
+  AdderII/Adder87x port
+
+* Patch by Ladislav Michl, 16 Jun 2004:
+  Fix gcc-3.3.3 warnings for smc91111.c
+
+* Patch by Stefan Roese, 02 Jul 2004:
+  - Fix bug in 405 ethernet driver; allocated data not cleared!
+  - Fix problem in 405 i2c driver; don't try to print without console!
+
+* Patch by Paul Ruhland, 11 Jun 2004:
+  Remove debug code from 'board/lpd7a40x/flash.c'
+
+* Patch by Andrea Marson, 11 Jun 2004:
+  Update for PPChameleon board:
+  - support for SysClk @ 25MHz
+  - support for Silicon Motion SM712 VGA controller
+  - some clean ups
+
+* Patches by Richard Woodruff, 10 Jun 2004:
+  - fix problems with examples/stubs.c for GCC >= 3.4
+  - fix problems with gd initialization
+
+* Patch by Curt Brune, 17 May 2004:
+  - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
+  - Add support for ESPD-Inc. EVB4510 Board
+
+* Patch by Marc Leeman, 11 May 2004:
+  Fix for MPC8245 - reading PPC Memory from another device with the
+  PPC as PCI target device corrupts data due to interenal hardware
+  buffering.
+
+* Fix "cls" command when used with splash screen
+
+* Increase NFS download timeout (now 1 min - 10 sec is to short for a
+  slow download of a big image)
+
+* Add "cls" function to MPC823 LCD driver so we can reinitialize the
+  display even after showing a bitmap
+
+* Patch by Josef Wagner, 04 Jun 2004:
+  - DDR Ram support for PM520 (MPC5200)
+  - support for different flash types (PM520)
+  - USB / IDE / CF-Card / DiskOnChip support for PM520
+  - 8 bit boot rom support for PM520/CE520
+  - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
+  - I2C and RTC support for CPC45
+  - support of new flash type (28F160C3T) for CPC45
+
+* Fix flash parameters passed to Linux for PPChameleon board
+
+* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
+
+* Patch by Paul Ruhland, 10 Jun 2004:
+  fix support for Logic SDK-LH7A404 board and clean up the
+  LH7A404 register macros.
+
+* Patch by Matthew McClintock, 10 Jun 2004:
+  Modify code to select correct serial clock on Sandpoint8245
+
+* Patch by Robert Schwebel, 10 Jun 2004:
+  Add support for Intel K3 strata flash.
+
+* Patch by Thomas Brand, 10 Jun 2004:
+  Fix "loads" command on DK1S10 board
+
+* Patch by Yuli Barcohen, 09 Jun 2004:
+  Add support for 8MB flash SIMM and JFFS2 file system on
+  Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
+
+* Patch by Yuli Barcohen, 09 Jun 2004:
+  Add support for Analogue&Micro Adder87x and the older AdderII board.
+
+* Patch by Ming-Len Wu, 09 Jun 2004:
+  Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
+
+* Patch by Sam Song, 09 Jun 2004:
+  - Add support for RPXlite_DW board
+  - Update FLASH driver for 4*AM29DL323DB90VI
+  - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
+
+* Patch by Mark Jonas, 08 June 2004:
+  - Make MPC5200 boards evaluate the SVR to print processor name and
+    version in checkcpu() (cpu/mpc5xxx/cpu.c).
+
+* Patch by Kai-Uwe Bloem, 06 May 2004:
+  Fix endianess problem in cramfs code
+
+* Patch by Tom Armistead, 04 Jun 2004:
+  Add support for MAX6900 RTC
+
+* Patches by Ladislav Michl, 03 Jun 2004:
+  - fix cfi_flash.c on LE systems
+  - let 'make mrproper' delete u-boot.img as well
+  - turn printf into debug in cfi_flash.c
+
+* Patch by Kurt Stremerch, 28 May 2004:
+  Add support for Exys XSEngine board
+
+* Patch by Martin Krause, 27 May 2004:
+  Fix a MPC5xxx I2C timing issue in i2c_probe().
+
+* Patch by Leif Lindholm, 27 May 2004:
+  Fix board_init_f() for dbau1x00 board.
+
+* Patch by Imre Deak, 26 May 2004:
+  On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
+  Set flash base accordingly, and decide whether to do or skip board
+  specific setup steps.
+
+* Patch by Josef Baumgartner, 26 May 2004:
+  Add missing define in include/asm-m68k/global_data.h
+
+* Patch by Josef Baumgartner, 25 May 2004:
+  Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
+
+* Patch by Paul Ruhland, 24 May 2004:
+  fix SDRAM initialization for LPD7A400 board.
+
+* Patch by Jian Zhang, 20 May 2004:
+  add support for environment in NAND flash
+
+* Patch by Yuli Barcohen, 20 May 2004:
+  Add support for Interphase iSPAN boards.
+
+* Patches by Paul Ruhland, 17 May 2004:
+  - Add I/O functions to the smc91111 ethernet driver to support the
+    Logic LPD7A40x boards.
+  - Add support for the Logic Zoom LH7A40x based SDK board(s),
+    specifically the LPD7A400.
+
+* Patches by Robert Schwebel, 15 May 2004:
+  - call MAC address reading code also for SMSC91C111;
+  - make SMSC91C111 timeout configurable, remove duplicate code
+  - fix get_timer() for PXA
+  - update doc/README.JFFS2
+  - use "bootfile" env variable also for jffs2
+
+* Patch by Tolunay Orkun, 14 May 2004:
+  Add support for Cogent CSB472 board (8MB Flash Rev)
+
+* Patch by Thomas Viehweger, 14 May 2004:
+  - flash.h: more flash types added
+  - immap_8260.h: some bits added (useful for RMII)
+  - cmd_coninfo.c: typo corrected, printf -> puts
+  - reduced size by replacing spaces with tab
+
+* Patch by Robert Schwebel, 13 May 2004:
+  Add 'imgextract' command: extract one part of a multi file image.
+
+* Patches by Jon Loeliger, 11 May 2004:
+  Dynamically handle REV1 and REV2 MPC85xx parts.
+    (Jon Loeliger, 10-May-2004).
+  New consistent memory map and Local Access Window across MPC85xx line.
+  New CCSRBAR at 0xE000_0000 now.
+  Add RAPID I/O memory map.
+  New memory map in README.MPC85xxads
+    (Kumar Gala, 10-May-2004)
+  Better board and CPU identification on MPC85xx boards at boot.
+    (Jon Loeliger, 10-May-2004)
+  SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
+  Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
+    (Jim Robertson, 10-May-2004)
+  Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
+  Supports multiple PHYs.
+    (Andy Fleming, 10-May-2004)
+  Some README.MPC85xxads updates.
+    (Kumar Gala, 10-May-2004)
+  Copyright updates for "Freescale"
+    (Andy Fleming, 10-May-2004)
+
+* Patch by Stephen Williams, 11 May 2004:
+  Add flash support for ST M29W040B
+  Reduce JSE specific flash.c to remove dead code.
+
+* Patch by Markus Pietrek, 04 May 2004:
+  Fix clear_bss code for ARM systems (all except s3c44b0 which
+  doesn't clear BSS at all?)
+
+* Fix "ping" problem on INC-IP board. Strange problem:
+  Sometimes the store word instruction hangs while writing to one of
+  the Switch registers, but only if the next instruction is 16-byte
+  aligned. Moving the instruction into a separate function somehow
+  makes the problem go away.
+
+* Patch by Rishi Bhattacharya, 08 May 2004:
+  Add support for TI OMAP5912 OSK Board
+
+* Patch by Sam Song May, 07 May 2004:
+  Fix typo of UPM table for rmu board
+
+* Patch by Pantelis Antoniou, 05 May 2004:
+  - Intracom board update.
+  - Add Codec POST.
+
+* Add support for the second Ethernet interface for the 'PPChameleon'
+  board.
+
+* Patch by Dave Peverley, 30 Apr 2004:
+  Add support for OMAP730 Perseus2 Development board
+
+* Patch by Alan J. Luse, 29 Apr 2004:
+  Fix flash chip-select (OR0) option register setting on FADS boards.
+
+* Patch by Alan J. Luse, 29 Apr 2004:
+  Report MII network speed and duplex setting properly when
+  auto-negotiate is not enabled.
+
+* Patch by Jarrett Redd, 29 Apr 2004:
+  Fix hang on reset on Ocotea board due to flash in wrong mode.
+
+* Patch by Dave Peverley, 29 Apr 2004:
+  add MAC address detection to smc91111 driver
+
+* Patch by David Müller, 28 Apr 2004:
+  fix typo in lib_arm/board.c
+
+* Patch by Tolunay Orkun, 20 Apr 2004:
+  - README update: add CONFIG_CSB272 and csb272_config
+  - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
+    i2cfast environment variable
+
+* Patch by Yuli Barcohen, 19 Apr 2004:
+  - Rename DUET_ADS to MPC885ADS
+  - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
+  - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
+  - Clean up FADS family port to use the new defines
+
+* Fix PCI support on CPC45 board
+
+* Patch by Scott McNutt, 25 Apr 2004:
+  Add Nios GDB/JTAG Console support:
+  - Add stubs to support gdb via JTAG.
+  - Add support for console over JTAG.
+  - Minor cleanup.
+
+* Add support for CATcenter board (based on PPChameleon ME module)
+
+* Patch by Klaus Heydeck, 12 May 2004:
+  Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
+  load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
+  various changes to KUP4 board specific files
+
+* Fix minor network problem on MPC5200: need some delay between
+  resetting the PHY and sending the first packet. Implemented in a
+  "natural" way by invoking the PHY reset and initialization code
+  only once after power on vs. each time the interface is brought up.
+
+* Add some limited support for low-speed devices to SL811 USB controller
+  (at least "usb reset" now passes successfully and "usb info" displays
+  correct information)
+
+* Change init sequence for multiple network interfaces: initialize
+  on-chip interfaces before external cards.
+
+* Fix memory leak in the NAND-specific JFFS2 code
+
+* Fix SL811 USB controller when attached to a USB hub
+
+* Fix config option spelling in PM520 config file
+
+* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
+  patches by Pantelis Antoniou, 30 Mar 2004)
+
+* Fix minor NAND JFFS2 related issue
+
+* Fixes for SL811 USB controller:
+  - implement workaround for broken memory stick
+  - improve error handling
+
+* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
+  cope with congested networks.
+
+======================================================================
+Changes for U-Boot 1.1.1:
+======================================================================
+
+* Patch by Travis Sawyer, 23 Apr 2004:
+  Fix VSC/CIS 8201 phy descrambler interoperability timing due to
+  errata from Vitesse Semiconductor.
+
+* Patch by Philippe Robin, 22 Apr 2004:
+  Fix ethernet configuration for "versatile" board
+
+* Patch by Kshitij Gupta, 21 Apr 2004:
+  Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
+
+* Patch by Steven Scholz, 24 Feb 2004:
+  Fix a bug in AT91RM9200 ethernet driver:
+  The MII interface is now initialized before accessing the PHY.
+
+* Patch by John Kerl, 19 Apr 2004:
+  Use U-boot's miiphy.h for PHY register names, rather than
+  introducing a new header file.
+
+* Update pci_ids.h from linux-2.4.26
+
+* Patch by Masami Komiya, 19 Apr 2004:
+  Fix problem cause by VLAN function on little endian architecture
+  without VLAN environment
+
+* Clean up the TQM8xx_YYMHz configurations; allow to use the same
+  binary image for all clock frequencies. Implement run-time
+  optimization of flash access timing based on the actual bus
+  frequency.
+
+* Modify KUP4X board configuration to use SL811 driver for USB memory
+  sticks (including FAT / VFAT filesystem support)
+
+* Add SL811 Host Controller Interface driver for USB
+
+* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
+
+* Patch by Pantelis Antoniou, 19 Apr 2004:
+  Allow to use shell style syntax (i. e. ${var} ) with standard parser.
+  Minor patches for Intracom boards.
+
+* Patch by Christian Pell, 19 Apr 2004:
+  cleanup support for CF/IDE on PCMCIA for PXA25X
+
+* Temporarily disabled John Kerl's extended MII command code because
+  "miivals.h" is missing
+
+* Patches by Mark Jonas, 13 Apr 2004:
+  - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
+  - Add sync instructions to IceCube SDRAM init code
+  - Move SDRAM chip constants into seperate include files
+  - Unify DDR and SDR initialization code
+  - Unify all IceCube (Lite5xxx) target names
+
+* Patch by John Kerl, 16 Apr 2004:
+  Enable ranges in mii command, e.g. mii read 0-1f 0 or
+  mii read 4-7 18-1a.  Also add mii dump subcommand for
+  pretty-printing standard regs 0-5.
+
+* Patch by  Stephen Williams, 16 April 2004:
+  fix typo in JSE.h; update MAINTAINERS
+
+* Patch by Matthew S. McClintock, 14 Apr 2004:
+  fix initdram function for utx8245 board
+
+* Patch by Markus Pietrek, 14 Apr 2004:
+  use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
+
+* Patch by Reinhard Meyer, 18 Apr 2004:
+  provide the IDE Reset Function for EMK 5200 boards
+
+* Patch by Masami Komiya, 12 Apr 2004:
+  fix pci_hose_write_config_{byte,word}_via_dword problems
+
+* Patch by Sangmoon Kim, 12 Apr 2004:
+  Update max RAM size for debris board
+
+* Patch by Travis Sawyer, 08 Apr 2004:
+  Add TLB entry for second DIMM slot on ocotea
+
+* Patch by Masami Komiya, 08 Apr 2004:
+  add RTL8169 network driver
+
+* Patch by Dan Malek, 07 Apr 2004:
+  - Add support for RPC/STx GP3, Motorola 8560 board
+  - Update 85xx TSEC driver so it searches MII for first available PHY
+    and uses that one.
+  - Add functions to support console MII commands.
+
+* Patch by Tolunay Orkun, 07 Apr 2004:
+  Move initialization of bi_iic_fast[]
+  from board_init_f() to board_init_r()
+
+* Patch by Yasushi Shoji, 07 Apr 2004:
+  Cleanup microblaze port
+
+* Patch by Sangmoon Kim, 07 Apr 2004:
+  Add auto SDRAM module detection for Debris board
+
+* Patch by Rune Torgersen, 06 Apr 2004:
+  - Fix some PCI problems on the MPC8266ADS board
+  - Fix the location of some PCI entries in the immap structure
+
+* Patch by Yasushi Shoji, 07 Apr 2004:
+  - add support for microblaze processors
+  - add support for AtmarkTechno "suzaku" board
+
+* Configure PPChameleon board to use redundand environment in flash
+
+* Configure PPChameleon board to use JFFS2 NAND support.
+
+* Added support for JFFS2 filesystem (read-only) on top of NAND flash
+
+* Patch by Rune Torgersen, 16 Apr 2004:
+  LBA48 fixes
+
+* Patches by Pantelis Antoniou, 16 Apr 2004:
+  - add support for a new version of an Intracom board and fix
+    various other things on others.
+  - add verify support to the crc32 command (define
+    CONFIG_CRC32_VERIFY to enable it)
+  - fix FEC driver for MPC8xx systems:
+    1. fix compilation problems for boards that use dynamic
+       allocation of DPRAM
+    2. shut down FEC after network transfers
+  - HUSH parser fixes:
+    1. A new test command was added. This is a simplified version of
+       the one in the bourne shell.
+    2. A new exit command was added which terminates the current
+       executing script.
+    3. Fixed handing of $? (exit code of last executed command)
+  - Fix some compile problems;
+    add "once" functionality for the netretry variable
+
+* Patch by George G. Davis, 02 Apr 2004:
+  add support for Intel Assabet board
+
+* Patch by Stephen Williams, 01 Apr 2004:
+  Add support for Picture Elements JSE board
+
+* Patch by Christian Pell, 01 Apr 2004:
+  Add CompactFlash support for PXA systems.
+
+* Patches by Pantelis Antoniou, 30 Mar 2004:
+  - add auto-complete support to the U-Boot CLI
+  - add support for NETTA and NETPHONE boards; fix NETVIA board
+  - add support for the Epson 156x series of graphical displays
+    (These displays are serial and not suitable for using a normal
+    framebuffer console on them)
+  - add infrastructure needed in order to POST any DSPs in a board
+  - improve and fix various things in the MPC8xx FEC driver:
+    1. The new 87x and 88x series of processors have two FECs,
+       and the new driver supports them both.
+    2. Another change in the 87x/88x series is support for
+       the RMII (Reduced MII) interface. However numerous
+       changes are needed to make it work since the PHYs
+       are connected to the same lines. That means that
+       you have to address them correctly over the MII
+       interface.
+    3. We now correctly match the MII/RMII interface
+       configuration to what the PHY reports.
+  - Fix problem when readingthe MII status register. Due to the
+    internal design of many PHYs you have to read the register
+    twice. The problem is more apparent in 10Mbit mode.
+  - add new mode ".jffs2s" for reading from a NAND device: it just
+    skips over bad blocks.
+  - add networking support for VLANs (802.1q), and CDP (Cisco
+    Discovery Protocol)
+  - some minor patches / cleanup
+
+* Patch by Yuli Barcohen, 28 Mar 2004:
+  - Add support for MPC8272 family including MPC8247/8248/8271/8272
+  - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
+  - Change configuration method for MPC8260ADS family
+
+* add startup code to clear the BSS of standalone applications
+
+* Fix if / elif handling bug in HUSH shell
+
+======================================================================
+Changes for U-Boot 1.1.0:
+======================================================================
+
+* Patch by Mark Jonas: Remove config.tmp files only when
+  unconfiguring the board
+
+* Adapt RMU board for bigger flash memory
+
+* Patch by Klaus Heydeck, 13 Mar 2003:
+  Add support for KUP4X Board
+
+* Patch by Pavel Bartusek, 21 Mar 2004
+  Add Reiserfs support
+
+* Patch by Hinko Kocevar, 20 Mar 2004
+  - Add auto-release for SMSC LAN91c111 driver
+  - Add save/restore of PTR and PNR regs as suggested in datasheet
+
+* Patch by Stephen Williams, 19 March 2004
+  Increase speed of sector reads from SystemACE,
+  shorten poll timeout and remove a useless reset
+
+* Patch by Tolunay Orkun, 19 Mar 2004:
+  Make GigE PHY 1000Mbps Speed/Duplex detection conditional
+  (CONFIG_PHY_GIGE)
+
+* Patch by Brad Kemp, 18 Mar 2004:
+  prevent machine checks during a PCI scan
+
+* Patch by Pierre Aubert, 18 Mar 2004:
+  Fix string cleaning in IDE identification
+
+* Patch by Pierre Aubert, 18 Mar 2004:
+  - Unify video mode handling for Chips & Technologies 69000 Video
+    chip and Silicon Motion SMI 712/710/810 Video chip
+  - Add selection of the video output (CRT or LCD) via 'videoout'
+    environment variable for the Silicon Motion
+  - README update
+
+* Patch by Pierre Aubert, 18 Mar 2004:
+  include/common.h typo fix
+
+* Patches by Tolunay Orkun, 17 Mar 2004:
+  - Add support for bd->bi_iic_fast[] initialization via environment
+    variable "i2cfast" (CONFIG_I2CFAST)
+  - Add "i2cfast" u-boot environment variable support for csb272
+
+* Patch by Carl Riechers, 17 Mar 2004:
+  Ignore '\0' characters in console input for use with telnet and
+  telco pads.
+
+* Patch by Leon Kukovec, 17 Mar 2004:
+  typo fix for strswab prototype #ifdef
+
+* Patches by Thomas Viehweger, 16 Mar 2004:
+  - show PCI clock frequency on MPC8260 systems
+  - add FCC_PSMR_RMII flag for HiP7 processors
+  - in do_jffs2_fsload(), take load address from load_addr if not set
+    explicit, update load_addr otherwise
+  - replaced printf by putc/puts when no formatting is needed
+    (smaller code size, faster execution)
+
+* Patch by Phillippe Robin, 16 Mar 2004:
+  avoid dereferencing NULL pointer in lib_arm/armlinux.c
+
+* Patch by Stephen Williams, 15 Mar 2004:
+  Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
+
+* Patch by Tolunay Orkun, 15 Mar 2004:
+  Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
+
+* Patch by Travis Sawyer, 15 Mar 2004:
+  Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
+
+* Add start-up delay to make sure power has stabilized before
+  attempting to switch on USB on SX1 board.
+
+* Patch by Josef Wagner, 18 Mar 2004:
+  - Add support for MicroSys XM250 board (PXA255)
+  - Add support for MicroSys PM828 board (MPC8280)
+  - Add support for 32 MB Flash on PM825/826
+  - new SDRAM refresh rate for PM825/PM826
+  - added support for MicroSys PM520 (MPC5200)
+  - replaced Query by Identify command in CPU86/flash.c
+    to support 28F160F3B
+
+* Fix wrap around problem with udelay() on ARM920T
+
+* Add support for Macronix flash on TRAB board
+
+* Patch by Pierre Aubert, 15 Mar 2004:
+  Fix buffer overflow in IDE identification
+
+* Fix power-off of LCD for out-of-band temperatures on LWMON board
+
+* Remove redundand #define in IceCube.h
+
+* Patch by Steven Scholz, 27 Feb 2004:
+  - Adding get_ticks() and get_tbclk() for AT91RM9200
+  - Many white space fixes in cpu/at91rm9200/interrupts.c
+
+* Patches by Steven Scholz, 20 Feb 2004:
+  some cleanup in AT91RM9200 related code
+
+* Patches by Travis Sawyer, 12 Mar 2004:
+  - Fix Gigabit Ethernet support for 440GX
+  - Add Gigabit Ethernet Support to MII PHY utilities
+
+* Patch by Brad Kemp, 12 Mar 2004:
+  Fixes for drivers/cfi_flash.c:
+  - Better support for x8/x16 implementations
+  - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
+  - Added defines for AMD command and address constants
+
+* Patch by Leon Kukovec, 12 Mar 2004:
+  Fix get_dentfromdir() to correctly handle deleted dentries
+
+* Patch by George G. Davis, 11 Mar 2004:
+  Remove hard coded network settings in TI OMAP1610 H2
+  default board config
+
+* Patch by George G. Davis, 11 Mar 2004:
+  add support for ADS GraphicsClient+ board.
+
+* Patch by Pierre Aubert, 11 Mar 2004:
+  - add bitmap command and splash screen support in cfb console
+  - add [optional] origin in the bitmap display command
+
+* Patch by Travis Sawyer, 11 Mar 2004:
+  Fix ocotea board early init interrupt setup.
+
+* Patch by Thomas Viehweger, 11 Mar 2004:
+  Remove redundand code; add  PCI-specific bits to include/mpc8260.h
+
+* Patch by Stephan Linz, 09 Mar 2004
+  - Add support for the SSV ADNP/ESC1 (Nios Softcore)
+
+* Patch by George G. Davis, 9 Mar 2004:
+  fix recent build failure for SA1100 target
+
+* Patch by Travis Sawyer, 09 Mar 2004:
+  Support native interrupt mode for the IBM440GX.
+  Previously it was running in 440GP compatibility mode.
+
+* Patch by Philippe Robin, 09 Mar 2004:
+  Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
+  Platform support.
+
+* Patch by Masami Komiya, 08 Mar 2004:
+  Don't overwrite server IP address or boot file name
+  when the boot server does not return values
+
+* Patch by Tolunay Orkun, 5 Mar 2004:
+  Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
+
+* Patch by Tolunay Orkun, 5 Mar 2004:
+  Fix early board initialization for Cogent CSB272 board
+
+* Patch by Ed Okerson, 3 Mar 2004:
+  fix CFI flash writes for little endian systems
+
+* Patch by Reinhard Meyer, 01 Mar 2004:
+  generalize USB and IDE support for MPC5200 with according
+  changes to IceCube.h and TOP5200.h
+  add Am29LV256 256 MBit FLASH support for TOP5200 boards
+  add info about USB and IDE to README
+
+* Patch by Yuli Barcohen, 4 Mar 2004:
+  Fix problems with GCC 3.3.x which changed handling of global
+  variables explicitly initialized to zero (now in .bss instead of
+  .data as before).
+
+* Patch by Leon Kukovec, 02 Mar 2004:
+  add strswab() to fix IDE LBA capacity, firmware and model numbers
+  on little endian machines
+
+* Patch by Masami Komiya, 02 Mar 2004:
+  - Remove get_ticks() from NFS code
+  - Add verification of RPC transaction ID
+
+* Patch by Pierre Aubert, 02 Mar 2004:
+  cleanup for IDE and USB drivers for MPC5200
+
+* Patch by Travis Sawyer, 01 Mar 2004:
+  Ocotea:
+  - Add IBM PPC440GX Ref Platform support (Ocotea)
+    Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
+    Adapted to U-Boot and 440GX port
+  440gx_enet.c:
+  - Add gracious handling of all Ethernet Pin Selections for 440GX
+  - Add RGMII selection for Cicada CIS8201 Gigabit PHY
+  ppc440.h:
+  - Add needed bit definitions
+  - Fix formatting
+
+* Patch by Carl Riechers, 1 Mar 2004:
+  Add PPC440GX prbdv0 divider to fix memory clock calculation.
+
+* Patch by Stephan Linz, 27 Feb 2004
+  - avoid problems for targets without NFS download support
+
+* Patch by Rune Torgersen, 27 Feb 2004:
+  - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
+  - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
+  - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
+
+* Patch by Masami Komiya, 27 Feb 2004:
+  Fix rarpboot: add autoload by NFS
+
+* Patch by Dan Eisenhut, 26 Feb 2004:
+  fix flash_write return value in saveenv
+
+* Patch by Stephan Linz, 11 Dec 2003
+  expand config.mk to avoid trigraph warnings on NIOS
+
+* Rename "BMS2003" board into "HMI10"
+
+* SX1 patches: use "serial#" for USB serial #; use redundand environment
+  storage; auto-set console on USB port (using preboot command)
+
+* Add support for SX1 mobile phone; add support for USB-based console
+  (enable with "setenv stdout usbtty; setenv stdin usbtty")
+
+* Fix LOWBOOT configuration for MPC5200 with DDR memory
+
+* Fix SDRAM timings for LITE5200 / IceCube board
+
+* Handle Auti-MDIX / connection status for INCA-IP
+
+* Fix USB problems when attempting to read 0 bytes
+
+* Patch by Travis Sawyer, 26 Feb 2004:
+  Fix broken compile for XPEDITE1K target.
+
+* Patch by Stephan Linz, 26 Feb 2004:
+  Bug fix for NFS code on NIOS targets
+
+* Patch by Stephen Williams, 26 Feb 2004:
+  Break up SystemACE reads of large block counts
+
+* Patch by Pierre Aubert, 26 Feb 2004
+  add IDE support for MPC5200
+
+* Patch by Masami Komiya, 26 Feb 2004:
+  add autoload via NFS
+
+* Patch by Stephen Williams
+  Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
+  elsewhere in the source.
+
+* Patch by Steven Scholz, 25 Feb 2004:
+  - Timeouts in FPGA code should be based on CFG_HZ
+  - Minor cleanup in code for Altera FPGA ACEX1K
+
+* Patch by Steven Scholz, 25 Feb 2004:
+  Changed "Directory Hierarchy" section in README
+
+* Patch by Masami Komiya, 25 Feb 2004:
+  Reduce copy count in nfs_read_reply() of NFS code
+
+* Patch by Markus Pietrek, 24 Feb 2004:
+  NS9750 DevBoard added
+
+* Patch by Pierre Aubert, 24 Feb 2004
+  add USB support for MPC5200
+
+* Patch by Steven Scholz, 24 Feb 2004:
+  - fix MII commands to use values from last command
+
+* Patch by Torsten Demke, 24 Feb 2004:
+  Add support for the eXalion platform (SPSW-8240, F-30, F-300)
+
+* Patch by Rahul Shanbhag, 19 Feb 2004:
+  Fixes for for OMAP1610 board:
+  - shift some IRQ specific code to platform.S file
+  - remove duplicatewatchdog reset code from start.S
+
+* Make Auto-MDIX Support configurable on INCA-IP board
+
+* Fix license for mkimage tool
+
+* Patch by Masami Komiya, 24 Feb 2004:
+  Update NetBootFileXferSize in NFS code
+
+* Patch by Scott McNutt, 24 Feb 2004:
+  fix packet length in NFS code
+
+* Patch by Masami Komiy, 22 Feb 2004:
+  Add support for NFS for file download
+
+* Patch by Andrea Scian, 17 Feb 2004:
+  Add support for S3C44B0 processor and DAVE B2 board
+
+* Patch by Steven Scholz, 20 Feb 2004:
+  - Add support for MII commands on AT91RM9200 boards
+  - some cleanup in AT91RM9200 ethernet code
+
+* Patch by Peter Ryser, 20 Feb 2004:
+  Add support for the Xilinx ML300 platform
+
+* Patch by Stephan Linz, 17 Feb 2004:
+  Fix watchdog support for NIOS
+
+* Patch by Josh Fryman, 16 Feb 2004:
+  Fix byte-swapping for cfi_flash.c for different bus widths
+
+* Patch by Jon Diekema, 14 Jeb 2004:
+  Remove duplicate "FPGA Support" notes from the README file
+
+* Patches by Reinhard Meyer, 14 Feb 2004:
+  - update board/emk tree; use common flash driver
+  - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
+    [adapted for other PPC CPUs -- wd]
+  - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
+
+* Patch by Jon Diekema, 13 Feb 2004:
+  Call show_boot_progress() whenever POST "FAILED" is printed.
+
+* Patch by Nishant Kamat, 13 Feb 2004:
+  Add support for TI OMAP1610 H2 Board
+  Fixes for cpu/arm926ejs/interrupt.c
+	(based on Richard Woodruff's patch for arm925, 16 Oct 03)
+  Fix for a timer bug in OMAP1610 Innovator
+  Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
+
+* Patches by Stephan Linz, 12 Feb 2004:
+  - add support for NIOS timer with variable period preload counter value
+  - prepare POST framework support for NIOS targets
+
+* Patch by Denis Peter, 11 Feb 2004:
+  add POST support for the MIP405 board
+
+* Patch by Laurent Mohin, 10 Feb 2004:
+  Fix buffer overflow in common/usb.c
+
+* Patch by Tolunay Orkun, 10 Feb 2004:
+  Add support for Cogent CSB272 board
+
+* Patch by Thomas Elste, 10 Feb 2004:
+  Add support for NET+50 CPU and ModNET50 board
+
+* Patch by Sam Song, 10 Feb 2004:
+  Fix typos in cfi_flash.c
+
+* Patch by Leon Kukovec, 10 Feb 2004
+  Fixed long dir entry slot id calculation in get_vfatname
+
+* Patch by Robin Gilks, 10 Feb 2004:
+  add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
+  !=, <>, <, >, <=, >=)
+
+* Fix problem with side effects in macros in include/usb.h
+
+* Patch by David Benson, 13 Nov 2003:
+  bug 841358 - fix TFTP download size limit
+
+* Fixing bug 850768:
+  improper flush_cache() in load_serial()
+
+* Fixing bug 834943:
+  MPC8540 - missing volatile declarations
+
+* Patch by Stephen Williams, 09 Feb 2004:
+  Add support for Xilinx SystemACE chip:
+  - New files common/cmd_ace.c and include/systemace.h
+  - Hook systemace support into cmd_fat and the partition manager
+
+* Patch by Travis Sawyer, 09 Feb 2004:
+  Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
+
+* Patch by Travis Sawyer, 09 Feb 2004:
+  o 440GX:
+    - Fix PCI Indirect access for type 1 config cycles with ppc440.
+    - Add phymode for 440 enet
+    - fix pci pre init
+  o XPedite1K:
+    - Change board_pre_init to board_early_init_f
+    - Add user flash to bus controller setup
+    - Fix pci pre init
+    - Fix is_pci_host to check GPIO for monarch bit
+    - Force xpedite1k to pci conventional mode (via #define option)
+
+* Patch by Brad Kemp, 4 Feb 2004:
+  - handle the machine check that is generated during the PCI scans
+    on 82xx processors.
+  - define the registers used in the IMMR by the PCI subsystem.
+
+* Patch by Pierre Aubert, 03 Feb 2004:
+  cpu/mpc5xxx/start.S: copy MBAR into SPR311
+
+* Patch by Jeff Angielski, 03 Feb 2004:
+  Fix copy & paste error in cpu/mpc8260/pci.c
+
+* Patch by Reinhard Meyer, 24 Jan 2004:
+  Fix typo in cpu/mpc5xxx/pci_mpc5200.c
+
+* Add Auto-MDIX support for INCA-IP
+
+* Some code cleanup
+
+* Patch by Josef Baumgartner, 10 Feb 2004:
+  Fixes for ColdFire port
+
+* Patch by Brad Kemp, 11 Feb 2004:
+  Fix CFI flash driver problems
+
+* Make sure to use a bus clock divider of 2 only when running TQM8xxM
+  modules at CPU clock frequencies above 66 MHz.
+
+* Optimize flash programming speed for LWMON (by another 100% :-)
+
+* Patch by Jian Zhang, 3 Feb 2004:
+  - Changed the incorrect FAT12BUFSIZE
+  - data_begin in fsdata can be negative. Changed it to be short.
+
+* Patches by Stephan Linz, 30 Jan 2004:
+  1: - board/altera/common/flash.c:flash_erase():
+       o allow interrupts befor get_timer() call
+       o check-up each erased sector and avoid unexpected timeouts
+     - board/altera/dk1c20/dk1s10.c:board_early_init_f():
+       o enclose sevenseg_set() in cpp condition
+     - remove the ASMI configuration for DK1S10_standard_32 (never present)
+     - fix some typed in mistakes in the NIOS documentation
+  2: - split DK1C20 configuration into several header files:
+       o two new files for each NIOS CPU description
+       o U-Boot related part is remaining in DK1C20.h
+  3: - split DK1S10 configuration into several header files:
+       o two new files for each NIOS CPU description
+       o U-Boot related part is remaining in DK1S10.h
+  4: - Add support for the Microtronix Linux Development Kit
+       NIOS CPU configuration at the Altera Nios Development Kit,
+       Stratix Edition (DK-1S10)
+  5: - Add documentation for the Altera Nios Development Kit,
+       Stratix Edition (DK-1S10)
+  6: - Add support for the Nios Serial Peripharel Interface (SPI)
+       (master only)
+  7: - Add support for the common U-Boot SPI framework at
+       RTC driver DS1306
+
+* Patch by Rahul Shanbhag, 28 Jan 2004:
+  Fix flash protection/locking handling for OMAP1610 innovator board.
+
+* Patch by Rolf Peukert, 28 Jan 2004:
+  fix flash write problems on CSB226 board (write with 32 bit bus width)
+
+* Patches by Mark Jonas, 16 Jan 2004:
+  - fix rounding error when calculating baudrates for MPC5200 PSCs
+  - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
+    time which is not supported
+
+* Patch by Yuli Barcohen, 26 Jan 2004:
+  Allow bzip2 compression for small memory footprint boards
+
+* Patch by Brad Kemp, 21 Jan 2004:
+  Add support for CFI flash driver for both the Intel and the AMD
+  command sets.
+
+* Patch by Travis Sawyer, 20 Jan 2004:
+  Fix pci bridge auto enumeration of sibling p2p bridges.
+
+* Patch by Tolunay Orkun, 12 Jan 2004:
+  Add some delays as needed for Intel LXT971A PHY support
+
+* Patches by Stephan Linz, 09 Jan 2004:
+  - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
+  - make DK1C20 board configuration related to ASMI conform to
+    documentation
+
+* Patch by Anders Larsen, 09 Jan 2004:
+
+  ARM memory layout fixes: the abort-stack is now set up in the
+  correct RAM area, and the BSS is zeroed out as it should be.
+
+  Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
+  of the linker scripts are replaced by '__bss_start' and '_end',
+  resp., which is a further step to eliminate unnecessary differences
+  between the implementation of the CPU architectures.
+
+* Patch by liang a lei, 9 Jan 2004:
+  Fix Intel 28F128J3 ID in include/flash.h
+
+* Patch by Masami Komiya, 09 Jan 2004:
+  add support for TB0229 board (NEC VR4131 MIPS processor)
+
+* Patch by Leon Kukovec, 12 Dec 2003:
+  changed extern __inline__ into static __inline__ in
+  include/linux/byteorder/swab.h
+
+* Patch by Travis Sawyer, 30 Dec 2003:
+  Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
+  select MDI port based on enabled EMAC device.
+  Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
+  base PrPMC board.
+
+* Patch by Wolter Kamphuis, 15 Dec 2003:
+  made CONFIG_SILENT_CONSOLE usable on all architectures
+
+* Disable date command on TQM866M - there is no RTC on MPC866
+
+* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
+
+* Implement adaptive SDRAM timing configuration based on actual CPU
+  clock frequency for INCA-IP; fix problem with board hanging when
+  switching from 150MHz to 100MHz
+
+* Add PCMCIA CS support for BMS2003 board
+
+* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
+  see doc/README.MPC866 for details;
+  implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
+  calculate CPU clock frequency from PLL register values.
+
+* Add support for 128 MB RAM on TQM8xxL/M modules
+
+* Fix PS/2 keyboard problem caused by statically initialized variable
+  pointing to a location in flash
+
+* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
+
+* The PS/2 mux on the BMS2003 board needs 450 ms after power on
+  before we can access it; add delay in case we are faster (with no
+  CF card inserted)
+
+* Cleanup of some init functions
+
+* Make sure SCC Ethernet is always stopped by the time we boot Linux
+  to avoid Linux crashes by early packets coming in.
+
+* Accelerate flash accesses on LWMON board by using buffered writes
+
+* Fix typo in Makefile;
+  fix problem with PARTNUM detection
+
+* Patch by Reinhard Meyer, 09 Jan 2004:
+  - add RTC support for MPC5200 based boards (requires RTC_XTAL)
+
+* Add support for IDE LED on BMS2003 board
+  (exclusive with status LED!)
+
+* Add support for PS/2 keyboard (used with PS/2 multiplexor on
+  BMS2003 board)
+
+* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
+  Add common files for "emk" boards
+
+* Add a common get_ram_size() function and modify the the
+  board-specific files to invoke that common implementation.
+
+======================================================================
+Changes for U-Boot 1.0.1:
+======================================================================
+
+* Set default clock for INCA-IP to 150 MHz
+
+* Make BMS2003 use a separate config file to avoid #ifdef mess;
+  add I2C support; add support for DS1337 RTC
+
+* Add CompactFlash support  for BMS2003 board
+
+* Add support for status LED on BMS2003 board
+
+* Patch by Scott McNutt, 02 Jan 2004:
+  Add support for the Nios Active Serial Memory Interface (ASMI)
+  on Cyclone devices
+
+* Patch by Andrea Marson, 16 Dec 2003:
+  Add support for the PPChameleon ME and HI modules
+
+* Patch by Yuli Barcohen, 22 Dec 2003:
+  Add support for Motorola DUET ADS board (MPC87x/88x)
+
+* Patch by Robert Schwebel, 15 Dec 2003:
+  add support for cramfs (uses JFFS2 command interface)
+
+* Patches by Stephan Linz, 11 Dec 2003:
+  - more documentation for NIOS port
+  - new struct nios_pio_t, struct nios_spi_t
+  - Reconfiguration for NIOS Development Kit DK1C20:
+    o move board related code from board/dk1c20
+      to board/altera/dk1c20
+    o create a new common source path board/altera/common
+      and move generic flash access stuff into it
+    o change/expand configuration file DK1C20.h
+  - Add support for NIOS Development Kit DK1S10
+  - Add status LED support for NIOS systems
+  - Add dual 7-segment LED support for Altera NIOS DevKits
+
+* Patch by Ronen Shitrit, 10 Dec 2003:
+  Add support for the Marvell DB64360 / DB64460 development boards
+
+* Patch by Detlev Zundel, 10 Dec 2003:
+  fix dependency problem in examples/Makefile
+
+* Patch by Denis Peter, 8 Dec 2003
+  - add support for the PATI board (MPC555)
+  - add SPI support for the MPC5xx
+
+* Patch by Anders Larsen, 08 Dec 2003:
+  add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
+  to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
+  cleanup some redundand #defines
+
+* Patch by André Schwarz, 8 Dec 2003:
+  fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
+  - TX and RX deskriptors must be quad-word aligned
+  - does not work with only one TX deskriptor
+  - standard reset method does not work
+
+* Patch by Masami Komiya, 08 Dec 2003:
+  add RTL8139 ethernet driver
+
+* Patches by Ed Okerson, 07 Dec 2003:
+  - fix ethernet for the AU1x00 processors in little-endian mode.
+  - extend memsetup.S for the AU1x00 processors in BE and LE modes
+
+* Minor code cleanup (coding style)
+
+* Patch by Reinhard Meyer, 30 Dec 2003:
+  - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
+  - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
+  - turned debug print of PHY registers into a function (called in two places)
+  - added support for EMK MPC5200 based modules
+
+* Fix MPC8xx PLPRCR_MFD_SHIFT typo
+
+* Add support for TQM866M modules
+
+* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
+
+* Fix a few compiler warnings
+
+* Patch by Reinhard Meyer, 28 Dec 2003:
+  Add initial support for TOP5200 board
+
+* Make CPU clock on ICA-IP board controllable by a "cpuclk"
+  environment variable which can set to "100", "133", or "150". The
+  CPU clock will be configured accordingly upon next reboot. Other
+  values are ignored. In case of an invalid or undefined "cpuclk"
+  value, the compile-time default CPU clock speed will be used.
+
+* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
+  window that is used to access the UART registers by the Linux driver)
+
+* Patch by Reinhard Meyer, 20 Dec 2003:
+  Fix clock calculation for the MPC5200 for higher clock frequencies
+  (above 2**32 / 10 = 429.5 MHz).
+
+* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
+
+* Fix IceCube CLKIN configuration (it's 33.000000MHz)
+
+* Add new configuration for IceCube board with DDR memory
+
+* Update TRAB memory configurations
+
+* Add JFFS2 support for INCA-IP board
+
+* Patch by Bill Hargen, 09 Dec 2003:
+  - BUBINGA405EP: changed flash driver to protect top sector containing
+    first instruction.
+  - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
+  - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
+  - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
+  - 405EP: added/fixed support for "reginfo" command.
+  - 4xx: removed spurious MII error messages on "mii info" command.
+
+* Patch by Bernhard Kuhn, 28 Nov 2003:
+  add support for ColdFire CPU
+  add support for Motorola M5272C3 and M5282EVB boards
+
+* Patch by Pierre Aubert, 24 Nov 2003:
+  - add a return value for the fpga command
+  - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
+    is defined. If ide_preinit fails, ide_init is aborted.
+  - fix an endianess problem in fat.h
+
+* Patch by Wolter Kamphuis, 05 Dec 2003:
+  Add support for SNMC's QS850/QS823/QS860T boards
+
+* Patch by Yuli Barcohen, 3 Dec 2003:
+  "revive" U-Boot support for old Motorola MPC860ADS board
+
+* Patch by Cam(ilo?), 03 Dec 2003:
+  make examples build even with broken Montavista objcopy
+
+* Patch by Pavel Bartusek, 27 Nov 2003:
+  fix conversion problem with "bootretry" evironment variable
+
+* Patch by Andre Schwarz, 24 Nov 2003:
+  add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
+
+* Patch by Pavel Bartusek, 21 Nov 2003:
+  set ZMII bridge speed on 440
+
+* Patch by Anders Larsen, 17 Nov 2003:
+  Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
+
+* Patches by David Müller, 14 Nov 2003:
+  - board/mpl/common/common_util.c
+    * implement support for BZIP2 compressed images
+    * various cleanups (printf -> puts, ...)
+  - board/mpl/common/flash.c
+    * report correct errors to upper layers
+    * check the erase fail and VPP low bits in status reg
+  - board/mpl/vcma9/cmd_vcma9.c
+  - board/mpl/vcma9/flash.c
+    * various cleanups (printf -> puts, ...)
+  - common/cmd_usb.c
+    * fix typo in comment
+  - cpu/arm920t/usb_ohci.c
+    * support for S3C2410 is missing in #if line
+  - drivers/cs8900.c
+    * reinit some registers in case of error (cable missing, ...)
+  - fs/fat/fat.c
+    * support for USB/MMC devices is missing in #if line
+  - include/configs/MIP405.h
+  - include/configs/PIP405.h
+    * enable BZIP2 support
+    * enlarge malloc space to 1MiB because of BZIP2 support
+  - include/configs/VCMA9.h
+    * enable BZIP2 support
+    * enlarge malloc space to 1MiB because of BZIP2 support
+    * enable USB support
+  - lib_arm/armlinux.c
+    * change calling convention of ARM Linux kernel as
+      described on http://www.arm.linux.org.uk/developer/booting.php
+
+* Patch by Thomas Lange, 14 Nov 2003:
+  Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
+  support all these AMD boards.
+
+* Patch by Thomas Lange, 14 Nov 2003:
+  Workaround for mips au1x00 physical memory accesses (the au1x00
+  uses a 36 bit bus internally and cannot access physical memory
+  directly. Use the uncached SDRAM address instead of the physical
+  one.)
+
+* Patch by Xue Ligong (Joe), 13 Nov 2003:
+  add Realtek 8019 ethernet driver
+
+* Patch by Yuli Barcohen, 13 Nov 2003:
+  MPC826xADS/PQ2FADS  cleanup
+
+* Patch by Anders Larsen, 12 Nov 2003:
+  Update README to mark the PORTIO commands non-standard
+
+* Patch by Nicolas Lacressonnière, 12 Nov 2003:
+  update for for Atmel AT91RM9200DK development kit:
+  - support for environment variables in DataFlash
+  - Atmel DataFlash AT45DB1282 support
+
+* Patch by Jeff Carr, 11 Nov 2003:
+  add support for new version of 8270 processors
+
+* Patches by George G. Davis, 05 Nov 2003:
+  - only pass the ARM linux initrd tag to the kernel when an initrd
+    is actually present
+  - update omap1510inn configuration file
+
+* Patches by Stephan Linz, 3 Nov 2003:
+  - more endianess fixes for LAN91C111 driver
+  - CFG_HZ configuration patch for NIOS Cyclone board
+
+* Patch by Stephan Linz, 28 Oct 2003:
+  fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
+
+* Patch by Steven Scholz, 20 Oct 2003:
+  - make "mii info <addr>" show infor for PHY at "addr" only
+  - Endian fix for miiphy_info()
+
+* Patch by Gleb Natapov, 19 Sep 2003:
+  Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
+
+* Patch by Anders Larsen, 17 Sep 2003:
+  Bring ARM memory layout in sync with the documentation:
+  stack and malloc-heap are now located _below_ the U-Boot code
+
+* Accelerate booting on TRAB board: read and check  autoupdate	image
+  headers first instead of always reading the whole images.
+
+* Fix type in MPC5XXX code (pointed out by Victor Wren)
+
+* Enabled password check on RMU board
+
+* Fix configuration problem with IceCube in LOWBOOT configuration:
+  envrionment got embedded, corrupting the image layout.
+
+* Fix NEC display names (it's 6440 [for 640x480], not 6640).
+
+* Added BMS2003 board
+  add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
+
+* Fix flash driver for TRAB board (must use Unlock Bypass Reset
+  command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
+  and CPLD
+
+* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
+  recent tools
+
+* Add checksum verification to 'imls' command
+
+* Add bd_info fields needed for 4xx Linux I2C driver
+
+* Patch by Martin Krause, 4 Nov. 2003:
+  Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
+
+* Print used network interface when CONFIG_NET_MULTI is set
+
+* Patch by Bernhard Kuhn, 28 Oct 2003:
+  Add low boot support for MPC5200
+
+* Fix problem with dual PCMCIA support (NSCU)
+
+* Fix MPC5200 I2C initialization function
+
+======================================================================
+Changes for U-Boot 1.0.0:
+======================================================================
+
+* Fix parameter passing to standalone images with bootm command
+
+* Patch by Kyle Harris, 30 Oct 2003:
+  Fix build errors for ixdp425 board
+
+* Patch by David M. Horn, 29 Oct 2003:
+  Fixes to build under CYGWIN
+
+* Get IceCube MGT5100 working (again)
+
+* Fix problems in memory test on some boards (which was not
+  non-destructive as intended)
+
+* Patch by Gary Jennejohn, 28 Oct 2003:
+  Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
+  to prevent stack overflow on ARM systems
+
+* Patch by Stephan Linz, 28 Oct 2003:
+  fix init sequence error for NIOS port
+
+* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
+
+* Add CONFIG_VERSION_VARIABLE to TRAB configuration
+
+* Patch by Xiao Xianghua, 23 Oct 2003:
+  small patch for mpc85xx
+
+* Fix small problem in MPC5200 I2C driver
+
+* Fix FCC3 support on ATC board
+
+* Correct header printing for multi-image files in do_bootm()
+
+* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
+
+* Fix PCI problems on PPChameleon board
+
+* Patch by Steven Scholz, 18 Oct 2003:
+  Fix AT91RM9200 ethernet driver
+
+* Patch by Nye Liu, 17 Oct 2003:
+  Fix typo in include/mpc8xx.h
+
+* Patch by Richard Woodruff, 16 Oct 03:
+  Fixes for cpu/arm925/interrupt.c
+  - Initialize timestamp & lastdec vars.
+  - fix timestamp overflows.
+  - fix lastdec overflow.
+  - smarter normalization to allow udelay() below 1ms to work.
+
+* Patch by Scott McNutt, 16 Oct
+  add networking support for the Altera Nios Development Kit,
+  Cyclone Edition (DK-1C20)
+
+* Patch by Jon Diekema, 14 Oct 2003:
+  add hint about doc/README.silent to README file
+
+* Add CompactFlash support for NSCU
+
+* Fix PCI problems on PPChameleonEVB
+
+* TRAB auto-update: Base decision if we have to strip the image
+  header on image type as encoded in the header
+  (include image type patch by Martin Krause, 17 Oct 2003)
+
+* Patches by Xianghua Xiao, 15 Oct 2003:
+
+  - Added Motorola CPU 8540/8560 support (cpu/85xx)
+  - Added Motorola MPC8540ADS board support (board/mpc8540ads)
+  - Added Motorola MPC8560ADS board support (board/mpc8560ads)
+
+* Fix flash timings on TRAB board
+
+* Make sure HUSH is initialized for running auto-update scripts
+
+* Make 5200 reset command _really_ reset the board, without running
+  any other code after it
+
+* Fix errors with flash erase when range spans	across banks
+  that are mapped in reverse order
+
+* Fix flash mapping and display on P3G4 board
+
+* Patch by Kyle Harris, 15 Jul 2003:
+  - add support for Intel IXP425 CPU
+  - add support for IXDP425 eval board
+
+* Added config option CONFIG_SILENT_CONSOLE.  See doc/README.silent
+  for more information
+
+* Patch by Steven Scholz, 10 Oct 2003
+  - Add support for Altera FPGA ACEX1K
+
+* Patches by Thomas Lange, 09 Oct 2003:
+  - fix cmd_ide.c for non ppc boards (read/write functions did not
+    add ATA base address)
+  - fix for shannon board
+  - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
+  - Endian swap ATA identity for all big endian CPUs, not just PPC
+  - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
+    args to linux
+  - add support for dbau1x00 board (MIPS32)
+
+* Patch by Sangmoon Kim, 07 Oct 2003:
+  add support for debris board
+
+* Patch by Martin Krause, 09 Oct 2003:
+  Fixes for TRAB board
+  - /board/trab/rs485.c: correct baudrate
+  - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
+    udelay(); fix some timing problems with adc controller
+  - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
+    modify commands: touch and buzzer
+
+* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
+  (quick & dirty workaround for rogue pointer problem in get_vfatname());
+  Use direct function calls for auto_update instead of hush commands
+
+* Patch by Scott McNutt, 04 Oct 2003:
+  - add support for Altera Nios-32 CPU
+  - add support for Nios Cyclone Development Kit (DK-1C20)
+
+* Patch by Steven Scholz, 29 Sep 2003:
+  - A second parameter for bootm overwrites the load address for
+    "Standalone Application" images.
+  - bootm sets environment variable "filesize" to the resulting
+    (uncompressed) data length for "Standalone Application" images
+    when autostart is set to "no". Now you can do something like
+	if bootm $fpgadata $some_free_ram ; then
+		fpga load 0 $some_free_ram $filesize
+	fi
+
+* Patch by Denis Peter, 25 Sept 2003:
+  add support for the MIP405 Rev. C board
+
+* Patch by Yuli Barcohen, 25 Sep 2003:
+  add support for Zephyr Engineering ZPC.1900 board
+
+* Patch by Anders Larsen, 23 Sep 2003:
+  add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
+  implemented for the x86 architecture)
+
+* Patch by Sangmoon Kim, 23 Sep 2003:
+  fix pll_pci_to_mem_multiplier table for MPC8245
+
+* Patch by Anders Larsen, 22 Sep 2003:
+  enable timed autoboot on PXA
+
+* Patch by David Müller, 22 Sep 2003:
+  - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
+    returns correct libgcc file path
+  - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
+    time on s3c24x0 systems
+
+* Patch by Jon Diekema, 19 Sep 2003:
+  - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
+    link state to the fault LED.
+  - In NetLoop, make the Fault LED reflect the link status.  The link
+    status gets updated on entry, and on timeouts.
+
+* Patch by Anders Larsen, 18 Sep 2003:
+  allow mkimage to build and run on Cygwin-hosted systems
+
+* Patch by Frank Müller, 18 Sep 2003:
+  use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
+  cpu/mpc8xx/fec.c
+
+* Patch by Pantelis Antoniou, 16 Sep 2003:
+  add tool to compute fileds in the PLPRCR register for MPC86x
+
+* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
+
+* Fix build problems under FreeBSD
+
+* Add generic filesystem image type
+
+* Make fatload set filesize environment variable
+
+* enable basic / medium / high-end configurations for PPChameleonEVB
+  board; fix NAND code
+
+* enable TFTP client code to specify to the server the desired
+  timeout value (see RFC-2349)
+
+* Improve SDRAM setup for TRAB board
+
+* Suppress all output with splashscreen configured only if "splashimage"
+  is set
+
+* Fix problems with I2C support for mpc5200
+
+* Adapt TRAB configuration and auto_update to new memory layout
+
+* Add configuration for wtk board
+
+* Add support for the Sharp LQ065T9DR51U LCD display
+
+* Patch by Rune Torgersen, 17 Sep 2003:
+  - Fixes for MPC8266 default config
+  - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
+
+* Patches by Jon Diekema, 17 Sep 2003:
+  - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
+    env_common.c)
+  - sbc8260 tweaks
+  - adjust "help" output
+
+* Patches by Anders Larsen, 17 Sep 2003:
+  - fix spelling errors
+  - set GD_FLG_DEVINIT flag only after device function pointers
+    are valid
+  - Allow CFG_ALT_MEMTEST on systems where address zero isn't
+    writeable
+  - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
+  - trigger watchdog while waiting in serial driver
+
+* Add auto-update code for TRAB board using USB memory sticks,
+  support new configuration with more memory
+
+* disable MPC5200 bus pipelining as workaround for bus contention
+
+* Modify XLB arbiter priorities on MPC5200 so all devices use same
+  priority; configure critical interrupts to be handled like external
+  interrupts
+
+* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
+  go back to 66 MHz for stability
+
+* Patches by Jon Diekema, 15 Sep 2003:
+  - add description for missing CFG_CMD_* entries in the README file
+  - sacsng tweaks
+
+* Patch by Gleb Natapov, 14 Sep 2003:
+  enable watchdog support for all MPC824x boards that have a watchdog
+
+* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
+  "Non-octet Aligned Frame" errors we see at 100 Mbps
+
+* Patch by Sharad Gupta, 14 Sep 2003:
+  fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
+
+* Patch by llandre, 11 Sep 2003:
+  update configuration for PPChameleonEVB board
+
+* Patch by David Müller, 13 Sep 2003:
+  various changes to VCMA9 board specific files
+
+* Add I2C support for MGT5100 / MPC5200
+
+* Patch by Rune Torgersen, 11 Sep 2003:
+  Changed default memory option on MPC8266ADS to NOT be Page Based
+  Interleave, since this doesn't work very well with the standard
+  16MB DIMM
+
+* Patch by George G. Davis, 12 Sep 2003:
+  fix Makefile settings for sk98 driver
+
+* Patch by Stefan Roese, 12 Sep 2003:
+  - new boards added: DP405, HUB405, PLU405, VOH405
+  - some esd boards updated
+  - cpu/ppc4xx/sdram.c: disable memory controller before setting
+    first values
+  - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
+
+* Patch by Martin Krause, 11 Sep 2003:
+  add burn-in tests for TRAB board
+
+* Enable instruction cache on MPC5200 board
+
+* Patch by Denis Peter, 11 Sep 2003:
+  - fix USB data pointer assignment for bulk only transfer.
+  - prevent to display erased directories in FAT filesystem.
+
+* Change output format for NAND flash - make it look like for other
+  memory, too
+
+======================================================================
+Changes for U-Boot 0.4.8:
+======================================================================
+
+* Add I2C and RTC support for RMU board
+
+* Patches by Denis Peter, 9 Sep 2003:
+  add FAT support for IDE, SCSI and USB
+
+* Patches by Gleb Natapov, 2 Sep 2003:
+  - cleanup of POST code for unsupported architectures
+  - MPC824x locks way0 of data cache for use as initial RAM;
+    this patch unlocks it after relocation to RAM and invalidates
+    the locked entries.
+
+* Patch by Gleb Natapov, 30 Aug 2003:
+  new I2C driver for mpc107 bridge. Now works from flash.
+
+* Patch by Dave Ellis, 11 Aug 2003:
+  - JFFS2: fix typo in common/cmd_jffs2.c
+  - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
+  - JFFS2: remove node version 0 warning
+  - JFFS2: accept JFFS2 PADDING nodes
+  - SXNI855T: add AM29LV800 support
+  - SXNI855T: move environment from EEPROM to flash
+  - SXNI855T: boot from JFFS2 in NOR or NAND flash
+
+* Patch by Bill Hargen, 11 Aug 2003:
+  fixes for I2C on MPC8240
+  - fix i2c_write routine
+  - fix iprobe command
+  - eliminates use of global variables, plus dead code, cleanup.
+
+* Add support for USB Mass Storage Devices (BBB)
+  (tested with USB memory sticks only)
+
+* Avoid flicker on TRAB's VFD
+
+* Add support for SK98xx driver
+
+* Add PCI support for SL8245 board
+
+* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
+  or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
+  Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
+
+* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16	 MHz)
+  to allow for more accurate baudrate settings
+  (error now 0.7% at 115 kbps, instead of 3.5% before)
+
+* Patch by Andreas Mohr, 4 Sep 2003:
+  Fix a lot of spelling errors
+
+* Add support for PPChameleon Eval Board
+
+* Add support for P3G4 board
+
+* Fix problem with MGT5100 FEC driver: add "early" MAC address
+  initialization
+
+* Patch by Yuli Barcohen, 7 Aug 2003:
+  check BCSR to detect if the board is configured in PCI mode
+
+======================================================================
+Changes for U-Boot 0.4.7:
+======================================================================
+
+* Patch by Raghu Krishnaprasad, 7 Aug 2003:
+  add support for Adder II MPC852T module
+
+* Patch by George G. Davis, 19 Aug 2003:
+  fix TI Innovator/OMAP1510 pin configs
+
+* Patches by Kshitij, 18 Aug 2003
+  - add support for arm926ejs cpu core
+  - add support for TI OMAP 1610 Innovator Board
+
+* Patch by Yuli Barcohen, 14 Aug 2003:
+  add support for bzip2 uncompression
+
+* Add GCC library to examples/Makefile so GCC utility functions will
+  be resolved, too
+
+* Add I2C and RTC support for RMU board using software I2C driver
+  (because of better response to iprobe command); fix problem with
+  "reset" command
+
+* Patch by Matthias Fuchs, 28 Aug 2003:
+  Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
+  CONFIG_BOOTP_MAKS (see README).
+
+* Fix ICU862 environment problem
+
+* Fix RAM size detection for RMU board
+
+* Implement "reset" for MGT5100/MPC5200 systems
+
+======================================================================
+Changes for U-Boot 0.4.6:
+======================================================================
+
+* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
+  allow selection of clock frequency as "make" target
+
+* Implement memory autosizing code for IceCube boards
+
+* Configure network port on INCA-IP for autonegotiation
+
+* Fix overflow problem in network timeout code
+
+* Patch by Richard Woodruff, 8 Aug 2003:
+  Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
+
+======================================================================
+Changes for U-Boot 0.4.5:
+======================================================================
+
+* Update for TQM board defaults:
+  disable clocks_in_mhz, enable boot count limit
+
+* Removed tools/gdb from "make all" target.  Added make target "gdbtools"
+  in toplevel directory instead.  Removed astest.c from tools/gdb because
+  it is no longer relevant.
+
+* Fix PCI support for MPC5200 / IceCube Board
+
+* Map ISP1362 USB OTG controller for NSCU board
+
+* Patch by Brad Parker, 02 Aug 2003:
+  fix sc520_cdp problems
+
+* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
+
+* Allow erase command to cross flash bank boundaries
+
+* Patch by Scott McNutt, 21 Jul 2003:
+  Add support for LynuxWorks Kernel Downloadable Images (KDIs).
+  Both LynxOS and BlueCat linux KDIs are supported.
+
+* Patch by Richard Woodruff, 25 Jul 2003:
+  use more reliable reset for OMAP/925T
+
+* Patch by Nye Liu, 25 Jul 2003:
+  fix typo in mpc8xx.h
+
+* Patch by Richard Woodruff, 24 Jul 2003:
+  Fixes for cmd_nand.c:
+  - Fixed null dereferece which could result in incorrect ECC values.
+  - Added support for devices with no Ready/Busy signal hooked up.
+  - Added OMAP1510 read/write protect handling.
+  - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
+    for non-JFFS2.
+  - Switched default ECC to be JFFS2.
+
+* Allow crc32 to be used at address 0x000
+
+* Provide consistent interface to standalone applications to access
+  the 'global_data' structure
+  Provide a doc/README.standalone more useful to users/developers.
+
+* Make IceCube MGT5100 FEC driver work
+
+* Implement new mechanism to export U-Boot's functions to standalone
+  applications: instead of using (PPC-specific) system calls we now
+  use a jump table; please see doc/README.standalone for details
+
+* Patch by Dave Westwood, 24 Jul 2003:
+  added support for Unity OS (a proprietary OS)
+
+* Patch by Detlev Zundel, 23 Jul 2003:
+  add "imls" command to print flash table of contents
+
+* Fix cold boot detection for log buffer reset
+
+* Return error for invalid length specifiers with "cp.X" etc.
+
+* Fix startup problem on MIPS
+
+* Allow for CONFIG_SPLASH_SCREEN even when no explicit
+  bitmap support is configured
+
+* Patch by Bill Hargen, 18 Jul 2003:
+  - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
+
+* Patch by Denis Peter, 18 Jul 2003:
+  - fix memory configuration for MIP405T
+  - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
+
+* Cleanup of TQM82xx configurations; use "official" board types
+  to make selection easier.
+
+* Patch by Martin Krause, 17 Jul 2003:
+  add delay to get I2C working with "imm" command and s3c24x0_i2c.c
+
+* Patch by Richard Woodruff, 17 July 03:
+  - Fixed bug in OMAP1510 baud rate divisor settings.
+
+* Patch by Nye Liu, 16 July 2003:
+  MPC860FADS fixes:
+  - add MPC86xADS support (uses MPC86xADS.h)
+  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
+    o PLPRCR changes
+    o BRG changes (EXTAL/XTAL restricted to 10MHz)
+    o don't trust gclk() software measurement by default, depend on
+      CONFIG_8xx_GCLK_FREQ
+  - add DRAM SIMM not installed detection
+  - use more "correct" SDRAM initialization sequence
+  - allow different SDRAM sizes (8xxADS has 8M)
+  - default DER is 0
+  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
+  - rename MAMR/MBMR defines to be more consistent. Should eventually
+    be merged into MxMR to better reflect the PowerQUICC datasheet.
+
+* Patch by Yuli Barcohen, 16 Jul 2003:
+  support new Motorola PQ2FADS-ZU evaluation board which replaced
+  MPC8260ADS and MPC8266ADS
+
+======================================================================
+Changes for U-Boot 0.4.4:
+======================================================================
+
+* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
+
+* Add support for MGT5100 and MPC5200 processors
+
+* Patch by Lutz Dennig, 15 Jul 2003:
+  update for R360MPI board
+
+======================================================================
+Changes for U-Boot 0.4.3:
+======================================================================
+
+* Patches by Kshitij, 04 Jul 2003
+  - added support for arm925t cpu core
+  - added support for TI OMAP 1510 Innovator Board
+
+* Patches by Martin Krause, 14 Jul 2003:
+  - add I2C support for s3c2400 systems (trab board)
+  - (re-) add "ping" to command table
+
+* Fix handling of "slow" POST routines
+
+* Patches by Yuli Barcohen, 13 Jul 2003:
+  - Correct flash and JFFS2 support for MPC8260ADS
+  - fix PVR values and clock generation for PowerQUICC II family
+    (8270/8275/8280)
+
+* Patch by Bernhard Kuhn, 08 Jul 2003:
+  - add support for M68K targets
+
+* Patch by Ken Chou, 3 Jul:
+  - Fix PCI config table for A3000
+  - Fix iobase for natsemi.c
+    (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
+
+* Allow to enable "slow" POST routines by key press on power-on
+* Fix temperature dependend switching of LCD backlight on LWMON
+* Tweak output format for LWMON
+
+* Patch by Stefan Roese, 11 Jul 2003:
+  - Fix bug in CONFIG_VERSION_VARIABLE.
+  - AR405 config updated.
+  - OCRTC/ORSG: bsp command added.
+  - ASH405 bsp update.
+
+======================================================================
+Changes for U-Boot 0.4.2:
+======================================================================
+
+* Add support for NSCU board
+
+* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
+
+* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
+  mirror bit flash on TQM8xxM modules
+
+* Patch by Kenneth Johansson, 30 Jun 2003:
+  get rid of MK_CMD_ENTRY macro; update doc/README.command
+
+* Patch by Seb James, 30 Jun 2003:
+  Improve documentation of I2C configuration in README
+
+* Fix problems with previous log buffer "fixes"
+
+* Fix minor help text issues
+
+* "log append" did not append a newline
+
+======================================================================
+Changes for U-Boot 0.4.1:
+======================================================================
+
+* Fix some missing commands, cleanup header files
+  (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
+
+* Rewrite command lookup and help command (fix problems with bubble
+  sort when sorting command name list). Minor cleanup here and there.
+
+* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
+  - Allow to call sysmon function interactively
+  - PIC on LWMON board needs delay after power-on
+  - Add missing RSR definitions for MPC8xx
+  - Improve log buffer handling: guarantee clean reset after power-on
+  - Add support for EXBITGEN board (aka "genie")
+  - Add support for SL8245 board
+
+* Code cleanup:
+  - remove trailing white space, trailing empty lines, C++ comments, etc.
+  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
+
+* Patches by Kenneth Johansson, 25 Jun 2003:
+  - major rework of command structure
+    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
+
+======================================================================
+Changes for U-Boot 0.4.0:
+======================================================================
+
+* Patches by Robert Schwebel, 26 Jun 2003:
+  - csb226 configuration updated
+  - credits for logodl port updated
+  - innokom configuration updated
+  - logodl tree update, still with coding style inconsistencies
+  - added OCM for ppc405 warning to README
+
+* Patch by Pantelis Antoniou, 25 Jun 2003:
+  update NetVia with V2 board support
+
+* Header file cleanup for ARM
+
+* Patch by Murray Jensen, 24 Jun 2003:
+  - make sure to use only U-boot provided header files
+  - fix problems with ".rodata.str1.4" section as used by GCC-3.x
+
+* Patch by Stefan Roese, 24 Jun 2003:
+  - Update esd ASH405 board files.
+  - Update esd DASA_SIM config file.
+  - Add ping command to some esd boards.
+
+* Patch by Yuli Barcohen, 23 Jun 2003:
+  Update for MPC8260ADS board
+
+* Patch by Murray Jensen, 23 Jun 2003:
+  - cleanup of GCC 3.x compiler warnings
+
+* Patch by Rune Torgersen, 4 Jun 2003:
+  add large memory support for MPC8266ADS board
+
+* Patch by Richard Woodruff, 19 June 03:
+  - Enabled standard u-boot device abstraction for ARM
+  - Enabled console device for ARM
+  - Initilized bi_baudrate for ARM
+
+* Patch by Bill Hargen, 23 Apr 2003:
+  fix byte order for 824x I2C addresses (write op)
+
+* Patch by Murray Jensen, 20 Jun 2003:
+  - hymod update
+  - cleanup (especially for gcc-3.x compilers)
+
+* Patch by Tom Guilliams, 20 Jun 2003:
+  added CONFIG_750FX support for IBM 750FX processors
+
+* Patch by Devin Crumb, 02 Apr 2003:
+  Fix clock divider rounding problem in drivers/serial.c
+
+* Patch by Richard Woodruff, 19 June 03:
+  - Fixed smc91c111 driver to sync with the u-boot environment
+    (driver/smc91c111.c).
+  - Added eth_init error return check in NetLoop (net/net.c).
+
+* Patch by Ken Chou, 19 June 2003:
+  Added support for A3000 SBC board (Artis Microsystems Inc.)
+
+* Patches by Murray Jensen, 17 Jun 2003:
+  - Hymod board database mods: add "who" field and new xilinx chip types
+  - provide new "init_cmd_timeout()" function so code external to
+    "common/main.c" can use the "reset_cmd_timeout()" function before
+    entering the main loop
+  - add DTT support for adm1021 (new file dtt/adm1021.c; config
+    slightly different. see include/configs/hymod.h for an example
+    (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
+    CFG_DTT_ADM1021 defined)
+  - add new "eeprom_probe()" function which has similar args and
+    behaves in a similar way to "eeprom_read()" etc.
+  - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
+    function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
+  - gdbtools copyright update
+  - ensure that set_msr() executes the "sync" and "isync" instructions
+    after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
+  - 8260 I/O ports fix: Open Drain should be set last when configuring
+  - add SIU IRQ defines for 8260
+  - allow LDSCRIPT override and OBJCFLAGS initialization: change to
+    config.mk to allow board configurations to override the GNU
+    linker script, selected via the LDSCRIPT, make variable, and to
+    give an initial value to the OBJCFLAGS make variable
+  - 8260 i2c enhancement:
+    o correctly extends the timeout depending on the size of all
+      queued messages for both transmit and receive
+    o will not continue with receive if transmit times out
+    o ensures that the error callback is done for all queued tx
+      and rx messages
+    o correctly detects both tx and rx timeouts, only delivers one to
+      the callback, and does not overwrite an earlier error
+    o logic in i2c_probe now correct
+  - add "vprintf()" function so that "panic()" function can be
+    technically correct
+  - many Hymod board changes
+
+* Patches by Robert Schwebel, 14 Jun 2003:
+  - add support for Logotronic DL datalogger board
+  - cleanup serial line after kermit binary download
+  - add debugX macro (debug level support)
+  - update mach-types.h to latest arm.linux.org.uk master list.
+
+* Patches by David Müller, 12 Jun 2003:
+  - rewrite of the S3C24X0 register definitions stuff
+  - "driver" for the built-in S3C24X0 RTC
+
+* Patches by Yuli Barcohen, 12 Jun 2003:
+  - Add MII support and Ethernet PHY initialization for MPC8260ADS board
+  - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
+    configuration word supplied by FPGA on some MPC8260ADS boards
+
+* Patch by Pantelis Antoniou, 10 Jun 2003:
+  Unify status LED interface
+
+* Add support for DS12887 RTC; add RTC support for ATC board
+
+* Patch by Nicolas Lacressonniere, 11 Jun 2003:
+  Modifications for Atmel AT91RM9200DK ARM920T based development kit
+  - Add Atmel DataFlash support for reading and writing.
+  - Add possibility to boot a Linux from DataFlash with BOOTM command.
+  - Add Flash detection on Atmel AT91RM9200DK
+    (between Atmel AT49BV1614 and AT49BV1614A flashes)
+  - Replace old Ethernet PHY layer functions
+  - Change link address
+
+* Patch by Frank Smith, 9 Jun 2003:
+  use CRIT_EXCEPTION for machine check on 4xx
+
+* Patch by Detlev Zundel, 13 Jun 2003:
+  added implementation of the "carinfo" command in cmd_immap.c
+
+* Fix CONFIG_NET_MULTI support in include/net.h
+
+* Patches by Kyle Harris, 13 Mar 2003:
+  - Add FAT partition support
+  - Add command support for FAT
+  - Add command support for MMC
+  ----
+  - Add Intel PXA support for video
+  - Add Intel PXA support for MMC
+  ----
+  - Enable MMC and FAT for lubbock board
+  - Other misc changes for lubbock board
+
+* Patch by Robert Schwebel, April 02, 2003:
+  fix for SMSC91111 driver
+
+* Patch by Vladimir Gurevich, 04 Jun 2003:
+  make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
+
+* Patch by Stefan Roese, 05 Jun 2003:
+  - PPC4xx: Fix bug for initial stack in data cache as pointed out by
+    Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
+    data cache can be used even if the chip select is in use.
+  - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
+    (see README for further description).
+  - Changed config files of CONFIG_EEPRO100 boards to use the
+    CFG_RX_ETH_BUFFER define.
+
+* Add support for RMU board
+
+* Add support for TQM862L at 100/50 MHz
+
+* Patch by Pantelis Antoniou, 02 Jun 2003:
+  major reconstruction of networking code;
+  add "ping" support (outgoing only!)
+
+* Patch by Denis Peter, 04 June 2003:
+  add support for the MIP405T board
+
+* Patches by Udi Finkelstein, 2 June 2003:
+  - Added support for custom keyboards, initialized by defining a
+    board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
+  - Added support for the RBC823 board.
+  - cpu/mpc8xx/lcd.c now automatically calculates the
+    Horizontal Pixel Count field.
+
+* Fix alignment problem in BOOTP (dhcp_leasetime option)
+  [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
+
+* Patch by Mark Rakes, 14 May 2003:
+  add support for Intel e1000 gig cards.
+
+* Patch by Nye Liu, 3 Jun 2003:
+  fix critical typo in MAMR definition (include/mpc8xx.h)
+
+* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
+
+* Patch by Klaus Heydeck, 2 Jun 2003
+  Minor changes for KUP4K configuration
+
+* Patch by Marc Singer, 29 May 2003:
+  Fixed rarp boot method for IA32 and other little-endian CPUs.
+
+* Patch by Marc Singer, 28 May 2003:
+  Added port I/O commands.
+
+* Patch by Matthew McClintock, 28 May 2003
+  - cpu/mpc824x/start.S: fix relocation code when booting from RAM
+  - minor patches for utx8245
+
+* Patch by Daniel Engström, 28 May 2003:
+  x86 update
+
+* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
+  add nand flash support to SXNI855T configuration
+  fix/extend nand flash support:
+  - fix 'nand erase' command so does not erase bad blocks
+  - fix 'nand write' command so does not write to bad blocks
+  - fix nand_probe() so handles no flash detected properly
+  - add doc/README.nand
+  - add .jffs2 and .oob options to nand read/write
+  - add 'nand bad' command to list bad blocks
+  - add 'clean' option to 'nand erase' to write JFFS2 clean markers
+  - make NAND read/write faster
+
+* Patch by Rune Torgersen, 23 May 2003:
+  Update for MPC8266ADS board
+
+* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
+  instead CFG_MONITOR_LEN is now only used to determine	 _at_compile_
+  _time_  (!) if the environment is embedded within the U-Boot image,
+  or in a separate flash sector.
+
+* Cleanup CFG_DER #defines in config files (wd maintained only)
+
+* Fix data abort exception handling for arm920t CPU
+
+* Fix alignment problems with flash driver for TRAB board
+
+* Patch by Donald White, 21 May 2003:
+  fix calculation of base address in pci_hose_config_device()
+
+* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
+  execute "cmd2", even if "cmd1" fails. Note that this is different
+  to "run var1 var2" where the contents of "var2" will NOT be
+  executed when a command in "var1" fails.
+
+* Add zero-copy ramdisk support (requires corresponding kernel support!)
+
+* Patch by Kyle Harris, 20 May 2003:
+  In preparation for an ixp port, rename cpu/xscale and arch-xscale
+  into cpu/pxa and arch-pxa.
+
+* Patch by Stefan Roese, 23 May 2003:
+  - IBM PPC405EP port added.
+  - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
+    UART0) is used as default U-Boot console. PPC4xx only!
+  - esd ASH405 board added (PPC405EP based).
+  - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
+  - esd CPCI405AB board added.
+  - esd PMC405 board added.
+  - Update of some esd boards.
+
+* Patch by Denis Peter, 19 Mai 2003:
+  add support for the MIP405-3 board
+
+* Patch by Dave Ellis, 22 May 2003:
+  Fix problem with only partially cleared .bss segment
+
+* Patch by Rune Torgersen, 12 May 2003:
+  get PCI to work on a MPC8266ADS board; incorporate change to
+  cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
+
+* Patch by Nye Liu, 1 May 2003:
+  minor patches for the FADS8xx
+
+* Patch by Thomas Schäfer, 28 Apr 2003:
+  Fix SPD handling for 256 ECC DIMM on Walnut
+
+* Add support for arbitrary bitmaps for TRAB's	VFD command;
+  allow to pass boot bitmap addresses in environment variables;
+  allow for zero boot delay
+
+* Patch by Christian Geißinger, 19 May 2002:
+  On TRAB: wait until the dummy byte has been completely sent
+
+* Patch by David Updegraff, 22 Apr 2003:
+  update for CrayL1 board
+
+* Patch by Pantelis Antoniou, 21 Apr 2003:
+  add boot support for ARTOS (a proprietary OS)
+
+* Patch by Steven Scholz, 11 Apr 2003:
+  Add support for RTC DS1338
+
+* Patch by Rod Boyce, 24 Jan 2003:
+  Fix counting of extended partitions in diskboot command
+
+* Patch by Christophe Lindheimer, 20 May 2003:
+  allow the use of CFG_LOADS when CFG_NO_FLASH is set
+
+* Fix SDRAM timing on Purple board
+
+* Add support for CompactFlash on ATC board
+  (includes support for Intel 82365 and compatible PC Card controllers,
+  and Yenta-compatible PCI-to-CardBus controllers)
+
+* Patch by Mathijs Haarman, 08 May 2003:
+  Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
+
+* Fix problem with usage of "true" (undefined in current versions of bfd.h)
+
+* Add support for Promess ATC board
+
+* Patch by Keith Outwater, 28 Apr 2003:
+  - Miscellaneous corrections and additions to GEN860T board specific code.
+  - Added GEN860_SC variant to GEN860T.
+  - Miscellaneous corrections to GEN860T documentation.
+  - Correct duplicate entry in U-Boot CREDITS file.
+  - Add GEN860T_SC entry in MAINTAINERS file.
+  - Update CREDITS file with GEN860T_SC info.
+
+* Update Smiths Aerospace addresses in MAINTAINERS file
+
+* Fix error handling in hush's version of "run" command
+
+* LWMON extensions:
+  - Splashscreen support
+  - modem support
+  - sysmon support
+  - temperature dependend enabling of LCD
+
+* Allow booting from old "PPCBoot" disk partitions
+
+* Add support for TQM8255 Board / MPC8255 CPU
+
+======================================================================
+Changes for U-Boot 0.3.1:
+======================================================================
+
+* Make sure Block Lock Bits get cleared in R360MPI flash driver
+
+* MPC823 LCD driver: Fill color map backwards, to allow for steady
+  display when Linux takes over
+
+* Patch by Erwin Rol, 27 Feb 2003:
+  Add support for RTEMS (this time for real).
+
+* Add support for "bmp info" and "bmp display" commands to load
+  bitmap images; this can be used (for example in a "preboot"
+  command) to display a splash screen very quickly after poweron.
+
+* Add support for 133 MHz clock on INCA-IP board
+
+* Patch by Lutz Dennig, 10 Apr 2003:
+  Update for R360MPI board
+
+* Add new meaning to "autostart" environment variable:
+  If set to "no", a standalone image passed to the
+  "bootm" command will be copied to the load address
+  (and eventually uncompressed), but NOT be started.
+  This can be used to load and uncompress arbitrary
+  data.
+
+* Patch by Stefan Roese, 10 Apr 2003:
+  Changed DHCP client to use IP address from server option field #54
+  from the OFFER packet in the server option field #54 in the REQUEST
+  packet. This fixes a problem using a Windows 2000 DHCP server,
+  where the DHCP-server is not the TFTP-server.
+
+* Set max brightness for MN11236 displays on TRAB board
+
+* Add support for TQM862L modules
+
+======================================================================
+Changes for U-Boot 0.3.0:
+======================================================================
+
+* Patch by Arun Dharankar, 4 Apr 2003:
+  Add IDMA example code (tested on 8260 only)
+
+* Add support for Purple Board (MIPS64 5Kc)
+
+* Add support for MIPS64 5Kc CPUs
+
+* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
+
+* Patch by Denis Peter, 04 Apr 2003:
+  - update MIP405-4 board
+
+* Patch by Stefan Roese, 4 Apr 2003:
+  - U-Boot version environment variable "ver" added
+    (CONFIG_VERSION_VARIABLE).
+  - Changed PPC405GPr version from A to B.
+  - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
+
+* Patches by Denis Peter, 03 April 2003:
+  - fix PCI IRQs on MPL boards
+  - fix two more un-relocated pointer problems
+
+* Fix behaviour of "run" command:
+  - print error message iv variable does not exist
+  - terminate processing of arguments in case of error
+
+* Patches by Peter Figuli, 10 Mar 2003
+  - Add support for BTUART on PXA platform
+  - Add support for WEP EP250 (PXA) board
+
+* Fix flash problems on INCA-IP; add tool to allow bruning images  to
+  flash using a BDI2000
+
+* Implement fix for I2C Edge Conditions problem for all boards that
+  use the bit-banging driver (common/soft_i2c.c)
+
+* Patch by Martin Winistoerfer, 23 Mar 2003
+  - Add port to MPC555/556 microcontrollers
+  - Add support for cmi customer board with
+    Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
+
+* Patch by Rick Bronson, 28 Mar 2003:
+  - fix common/cmd_nand.c
+
+* Patch by Arun Dharankar, 24 Mar 2003:
+  - add threads / scheduler example code
+
+* Add patches by Robert Schwebel, 31 Mar 2003:
+  - add ctrl-c support for kermit download
+  - align bdinfo output on ARM
+  - csb226 board: bring in sync with innokom/memsetup.S
+  - csb226 board: fix MDREFR handling
+  - misc doc fixes / extensions
+  - innokom board: cleanup, MDREFR fix in memsetup.S, config update
+  - add BOOT_PROGRESS to armlinux.c
+
+* Add CPU ID, version, and clock speed for INCA-IP
+
+* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
+  - fix SRAM and SDRAM memory sizing
+  - add status LED support
+  - add MAC address for second (SCC1) ethernet port
+
+* Update default environment for TQM8260 board
+
+* Patch by Rick Bronson, 16 Mar 2003:
+  - Add NAND flash support for reading, writing, and erasing NAND
+    flash (certain forms of which are called SmartMedia).
+  - Add support for Atmel AT91RM9200DK ARM920T based development kit.
+
+* Patches by Robert Schwebel, 19 Mar 2003:
+  - use arm-linux-gcc as default compiler for ARM
+  - fix i2c fixup code
+  - fix missing baudrate setting
+  - added $loadaddr / CFG_LOAD_ADDR support to loadb
+  - moved "ignoring trailing characters" _before_ u-boot wants to
+    print out diagnostics messages; removes bogus characters at the
+    end of transmission
+
+* Patch by John Zhan, 18 Mar 2003:
+  Add support for SinoVee Microsystems SC8xx boards
+
+* Patch by Rolf Offermanns, 21 Mar 2003:
+  ported the dnp1110 related changes from the current armboot cvs to
+  current u-boot cvs. smc91111 does not work. problem marked in
+  smc91111.c, grep for "FIXME".
+
+* Patch by Brian Auld, 25 Mar 2003:
+  Add support for STM flash chips on ebony board
+
+* Add PCI support for MPC8250 Boards (PM825 module)
+
+* Patch by Stefan Roese, 25 Mar 2003:
+  - PCI405 update.
+
+* Patch by Stefan Roese, 20 Mar 2003:
+  - CPCI4052 update (support for revision 3).
+  - Set edge conditioning circuitry on PPC405GPr for compatibility
+    to existing PPC405GP designs.
+  - Clip udiv to 5 bits on PPC405 (serial.c).
+
+* Extend INCAIP board support:
+  - add automatic RAM size detection
+  - add "bdinfo" command
+  - pass flash address and size to Linux kernel
+  - switch to 150 MHz clock
+
+* Avoid flicker on the TRAB's VFD by synchronizing the enable with
+  the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
+  boards, version 153 for Rev. 200 boards).
+
+* Patch by Vladimir Gurevich, 12 Mar 2003:
+  Fix relocation problem of statically initialized string pointers
+  in common/cmd_pci.c
+
+* Patch by Kai-Uwe Blöm, 12 Mar 2003:
+  Cleanup & bug fixes for JFFS2 code:
+  - the memory mangement was broken. It caused havoc on malloc by
+    writing beyond the block boundaries.
+  - the length calculation for files was wrong, sometimes resulting
+    in short file reads.
+  - data copying now optionally takes fragment version numbers into
+    account, to avoid copying from older data.
+  See doc/README.JFFS2 for details.
+
+* Patch by Josef Wagner, 12 Mar 2003:
+  - 16/32 MB and 50/80 MHz support with auto-detection for IP860
+  - ETH05 and BEDBUG support for CU824
+  - added support for MicroSys CPC45
+  - new BOOTROM/FLASH0 and DOC base for PM826
+
+* Patch by Robert Schwebel, 12 Mar 2003:
+  Fix the chpart command on innokom board
+
+* Name cleanup:
+  mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
+  s/PPCBoot/U-Boot/ in some files
+  s/pImage/uImage/  in some files
+
+* Patch by Detlev Zundel, 15 Jan 2003:
+  Fix '' command line quoting
+
+* Patch by The LEOX team, 19 Jan 2003:
+  - add support for the ELPT860 board
+  - add support for Dallas ds164x RTC
+
+* Patches by David Müller, 31 Jan 2003:
+  - minimal setup for CardBus bridges
+  - add EEPROM read/write support in the CS8900 driver
+  - add support for the builtin I2C controller in the Samsung s3c24x0 chips
+  - add support for MPL's VCMA9 (Samsung s3c2410 based) board
+
+* Patch by Steven Scholz, 04 Feb 2003:
+  add support for RTC DS1307
+
+* Patch by Reinhard Meyer, 5 Feb 2003:
+  fix PLPRCR/SCCR init sequence on 8xx to allow for
+  changes of EBDF by software
+
+* Patch by Vladimir Gurevich, 07 Feb 2003:
+  "API-compatibility patch" for 4xx I2C driver
+
+* TRAB fixes / extensions:
+  - Restore VFD brightness as saved in environment
+  - add support for Fujitsu flashes
+  - make sure both buzzers are turned off (drive low level)
+
+* Patches by Robert Schwebel, 06 Mar 2003:
+  - fix bug in BOOTP code (must use NetCopyIP)
+  - update of CSB226 port
+  - clear BSS segment on XScale
+  - added support for i2c_init_board() function
+  - update to the Innokom plattform
+
+* Extend support for redundand environments for configurations where
+  environment size < sector size
+
+* Patch by Rune Torgersen, 13 Feb 2003:
+  Add support for Motorola MPC8266ADS board
+
+* Patch by Kyle Harris, 19 Feb 2003:
+  patches for the Intel lubbock board:
+  memsetup.S - general cleanup (based on Robert's csb226 code)
+  flash.c - overhaul, actually works now
+  lubbock.c - fix init funcs to return proper value
+
+* Patch by Kenneth Johansson, 26 Feb 2003:
+  - Fixed off by one in RFTA calculation.
+  - No need to abort when LDF is lower than we can program it's only
+    minimum timing so clamp it to what we can do.
+  - Takes function pointer to function for reading the spd_nvram. Usefull
+    for faking data or hardcode a module without the nvram.
+  - fix other user for above change
+  - fix some comments.
+
+* Patches by Brian Waite, 26 Feb 2003:
+  - fix port for evb64260 board
+  - fix PCI for evb64260 board
+  - fix PCI scan
+
+* Patch by Reinhard Meyer, 1 Mar 2003:
+  Add support for EMK TOP860 Module
+
+* Patch by Yuli Barcohen, 02 Mar 2003:
+  Add SPD EEPROM support for MPC8260ADS board
+
+* Patch by Robert Schwebel, 21 Jan 2003:
+  - Add support for Innokom board
+  - Don't complain if "install" fails
+  - README cleanup (remove duplicated lines)
+  - Update PXA header files
+
+* Add documentation for existing POST code (doc/README.POST)
+
+* Patch by Laudney Ren, 15 Jan 2003:
+  Fix handling of redundand environment in "tools/envcrc.c"
+
+* Patch by Detlev Zundel, 28 Feb 2003:
+  Add bedbug support for 824x systems
+
+* Add support for 16 MB flash configuration of TRAB board
+
+* Patch by Erwin Rol, 27 Feb 2003:
+  Add support for RTEMS
+
+* Add image information to README
+
+* Patch by Stefan Roese, 18 Feb 2003:
+  CPCIISER4 configuration updated.
+
+* Patch by Stefan Roese, 17 Feb 2003:
+  Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
+
+* Patch by Stefan Roese, 13 Feb 2003:
+  Add "pcidelay" environment variable (in ms, enabled via
+  CONFIG_PCI_BOOTDELAY).
+  PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
+  RST# to respond to configuration cycles (33MHz -> 1s).
+
+* Fix dual PCMCIA slot support (when running with just one
+  slot populated)
+
+* Add VFD type detection to trab board
+
+* extend drivers/cs8900.c driver to synchronize	 ethaddr  environment
+  variable with value in the EEPROM
+
+* Patch by Stefan Roese, 10 Feb 2003:
+  Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
+
+* Add support for MIPS32 4Kc CPUs
+
+* Add support for INCA-IP Board
+
+======================================================================
+Changes for U-Boot 0.2.2:
+======================================================================
+
+* Add dual ethernet support on PM826
+
+* Add support for LXT971 PHY on PM826
+
+* Patch by Tord Andersson, 16 Jan 2003:
+  Fix flash sector count for TQM8xxL
+
+* Fix I2C EEPROM problem on ICU862 board (would only write the first
+  16 bytes out of each 32 byte block)
+
+======================================================================
+Changes for U-Boot 0.2.1:
+======================================================================
+
+* Add support for V37 board
+  (patch by Jón Benediktsson, 11 Dec 2002)
+
+* Update baudrate in bd_info when it gets changed
+
+* Add watchdog trigger points while waiting for serial port
+  (so far only 8xx -- needed on LWMON with 100ms watchdog)
+
+* Improve command line tool to access the U-Boot's environment
+  (figuration of the utility, using a config file)
+
+* Add single quote support for (old) command line parser
+
+* Switch LWMON board default config from FRAM to EEPROM;
+  in POST, EEPROM shows up on 8 addresses
+
+======================================================================
+Changes for U-Boot 0.2.0:
+======================================================================
+
+* Use 1-byte-read instead of -write for iprobe() function
+  Add i2c commands to PM826 config
+
+* extend I2C POST code: check for list on known addresses
+
+* Improve log buffer code; use "loglevel" to decide which messages
+  to log on the console, too (like in Linux); get rid of "logstart"
+
+* Add command line tool to access the U-Boot's environment
+  (board-specific for TRAB now, to be fixed later)
+
+* Patch by Hans-Joerg Frieden, 06 Dec 2002
+  Fix misc problems with AmigaOne support
+
+* Patch by Chris Hallinan, 3 Dec 2002:
+  minor cleanup to the MPC8245 EPIC driver
+
+* Patch by Pierre Aubert , 28 Nov 2002
+  Add support for external (SIU) interrupts on MPC8xx
+
+* Patch by Pierre Aubert , 28 Nov 2002
+  Fix nested syscalls bug in standalone applications
+
+* Patch by David Müller, 27 Nov 2002:
+  fix output of "pciinfo" command for CardBus bridge devices.
+
+* Fix bug in TQM8260 board detection - boards got stuck when board ID
+  was not readable
+
+* Add LED indication for IDE activity on KUP4K board
+
+* Fix startup problems with VFD display on TRAB
+
+* Patch by Pierre Aubert, 20 Nov 2002
+  Add driver for Epson SED13806 graphic controller.
+  Add support for BMP logos in cfb_console driver.
+
+* Added support for both PCMCIA slots (at the same time!) on MPC8xx
+
+* Patch by Rod Boyce, 21 Nov 2002:
+  fix PCMCIA on MBX8xx board
+
+* Patch by Pierre Aubert , 21 Nov 2002
+  Add CFG_CPM_POST_WORD_ADDR to make the offset of the
+  bootmode word in DPRAM configurable
+
+* Patch by Daniel Engström, 18 Nov 2002:
+  Fixes for x86 port (mostly strings issues)
+
+* Patch by Ken Chou, 18 Nov 2002:
+  Fix for natsemi NIC cards (DP83815)
+
+* Patch by Pierre Aubert, 19 Nov 2002:
+  fix a bug for the MII configuration, and some warnings
+
+* Patch by Thomas Frieden, 13 Nov 2002:
+  Add code for AmigaOne board
+  (preliminary merge to U-Boot, still WIP)
+
+* Patch by Jon Diekema, 12 Nov 2002:
+  - Adding URL for IEEE OUI lookup
+  - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
+    being defined.
+  - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
+    root-on-nfs macros are designed to switch how the default boot
+    method gets defined.
+
+* Patch by Daniel Engström, 13 Nov 2002:
+  Add support for i386 architecture and AMD SC520 board
+
+* Patch by Pierre Aubert, 12 Nov 2002:
+  Add support for DOS filesystem and booting from DOS floppy disk
+
+* Patch by Jim Sandoz, 07 Nov 2002:
+  Increase number of network RX buffers (PKTBUFSRX in
+  "include/net.h") for EEPRO100 based boards (especially SP8240)
+  which showed "Receiver is not ready" errors when U-Boot was
+  processing the receive buffers slower than the network controller
+  was filling them.
+
+* Patch by Andreas Oberritter, 09 Nov 2002:
+  Change behaviour of NetLoop(): return -1 for errors, filesize
+  otherwise; return code 0 is valid an means no file loaded - in this
+  case the environment still gets updated!
+
+* Patches by Jon Diekema, 9 Nov 2002:
+  - improve ADC/DAC clocking on the SACSng board to align
+    the failing edges of LRCLK and SCLK
+  - sbc8260 configuration tweaks
+  - add status LED support for 82xx systems
+  - wire sspi/sspo commands into command handler; improved error
+    handlering
+  - add timestamp support and alternate memory test to the
+    SACSng configuration
+
+* Patch by Vince Husovsky, 7 Nov 2002:
+  Add "-n" to linker options to get rid of "Not enough room for
+  program headers" problem
+
+* Patch by David Müller, 05 Nov 2002
+  Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
+  so we can use an already existing name
+
+* Patch by Pierre Aubert, 05 Nov 2002
+  Hardware relatied improvments in FDC boot code
+
+* Patch by Holger Schurig, 5 Nov 2002:
+  Make the PXA really change it's frequency
+
+* Patch by Pierre Aubert, 05 Nov 2002
+  Add support for slave serial Spartan 2 FPGAs
+
+* Fix uninitialized memory (MAC	 address)  in  8xx  SCC/FEC  ethernet
+  drivers
+
+* Add support for log buffer which can be passed to Linux kernel's
+  syslog mechanism; used especially for POST results.
+
+* Patch by Klaus Heydeck, 31 Oct 2002:
+  Add initial support for kup4k board
+
+* Patch by Robert Schwebel, 04 Nov 2002:
+  - use watchdog to reset PXA250 systems
+  - added progress callbacks to (some of the) ARM code
+  - update for Cogent CSB226 board
+
+* Add support for FPS860 board
+
+* Patch by Guillaume Alexandre,, 04 Nov 2002:
+  Improve PCI access on 32-bits Compact PCI bus
+
+* Fix mdelay() on TRAB - this was still the debugging version with
+  seconds instead of ms.
+
+* Patch by Robert Schwebel, 1 Nov 2002:
+  XScale related cleanup (affects all ARM boards)
+
+* Cleanup of names and README.
+
+======================================================================
+Notes for U-Boot 0.1.0:
+======================================================================
+
+This is the initial version of "Das U-Boot", the Universal Boot Loader.
+
+It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
+For information about the history of the project please see the
+PPCBoot project page at http://sourceforge.net/projects/ppcboot
+
+======================================================================
diff --git a/MAINTAINERS b/MAINTAINERS
index 4262719..8bb38b5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -218,6 +218,8 @@
 	MPC8541CDS		MPC8541
 	MPC8555CDS		MPC8555
 
+	MPC8641HPCN		MPC8641D
+
 Dan Malek <dan@embeddededge.com>
 
 	STxGP3			MPC85xx
@@ -555,5 +557,16 @@
 	r5200			mcf52x2
 
 #########################################################################
+# AVR32 Systems:							#
+#									#
+# Maintainer Name, Email Address					#
+#	Board			CPU					#
+#########################################################################
+
+Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+	ATSTK1000		AT32AP7000
+
+#########################################################################
 # End of MAINTAINERS list						#
 #########################################################################
diff --git a/MAKEALL b/MAKEALL
index e9c04a6..879a17f 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -39,7 +39,7 @@
 	icecube_5100	icecube_5200	lite5200b	mcc200		\
 	o2dnt		pf5200		PM520		TB5200		\
 	Total5100	Total5200	Total5200_Rev2	TQM5200		\
-	TQM5200_B	TQM5200S					\
+	TQM5200_B	TQM5200S	v38b				\
 "
 
 #########################################################################
@@ -302,6 +302,12 @@
 	r5200		M5271EVB					\
 "
 
+#########################################################################
+## AVR32 Systems
+#########################################################################
+
+LIST_avr32="atstk1002"
+
 #-----------------------------------------------------------------------
 
 #----- for now, just run PPC by default -----
@@ -334,7 +340,8 @@
 	mips|mips_el| \
 	nios|nios2| \
 	x86|I486| \
-	coldfire)
+	coldfire| \
+	avr32)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}
diff --git a/Makefile b/Makefile
index 8ef0097..dec6355 100644
--- a/Makefile
+++ b/Makefile
@@ -23,7 +23,7 @@
 
 VERSION = 1
 PATCHLEVEL = 1
-SUBLEVEL = 4
+SUBLEVEL = 5
 EXTRAVERSION =
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 VERSION_FILE = $(obj)include/version_autogenerated.h
@@ -152,6 +152,9 @@
 ifeq ($(ARCH),blackfin)
 CROSS_COMPILE = bfin-elf-
 endif
+ifeq ($(ARCH),avr32)
+CROSS_COMPILE = avr32-
+endif
 endif
 endif
 
@@ -177,6 +180,9 @@
 ifeq ($(CPU),mpc85xx)
 OBJS += cpu/$(CPU)/resetvec.o
 endif
+ifeq ($(CPU),mpc86xx)
+OBJS += cpu/$(CPU)/resetvec.o
+endif
 ifeq ($(CPU),bf533)
 OBJS += cpu/$(CPU)/start1.o	cpu/$(CPU)/interrupt.o	cpu/$(CPU)/cache.o
 OBJS += cpu/$(CPU)/cplbhdlr.o	cpu/$(CPU)/cplbmgr.o	cpu/$(CPU)/flush.o
@@ -269,10 +275,10 @@
 		$(MAKE) -C $@ all
 
 $(NAND_SPL):	version
-		$(MAKE) -C nand_spl all
+		$(MAKE) -C nand_spl/board/$(BOARDDIR) all
 
 $(U_BOOT_NAND):	$(NAND_SPL) $(obj)u-boot.bin
-		cat nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
+		cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 
 version:
 		@echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \
@@ -322,6 +328,10 @@
 	@ exit 1
 endif
 
+.PHONY : CHANGELOG
+CHANGELOG:
+	git log --no-merges U-Boot-1_1_5.. > $@
+
 #########################################################################
 
 unconfig:
@@ -400,6 +410,9 @@
 		}
 	@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
 
+v38b_config: unconfig
+	@./mkconfig -a V38B ppc mpc5xxx v38b
+
 inka4x0_config:	unconfig
 	@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 
@@ -1143,19 +1156,22 @@
 	@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
 
 rainier_config:	unconfig
-	@echo "#define CONFIG_RAINIER" > include/config.h
+	@mkdir -p $(obj)include
+	@echo "#define CONFIG_RAINIER" > $(obj)include/config.h
 	@echo "Configuring for rainier board as subset of sequoia..."
 	@$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc
 
 rainier_nand_config:	unconfig
-	@echo "#define CONFIG_RAINIER" > include/config.h
+	@mkdir -p $(obj)include
+	@mkdir -p $(obj)nand_spl
+	@mkdir -p $(obj)board/amcc/sequoia
+	@echo "#define CONFIG_RAINIER" > $(obj)include/config.h
 	@echo "Configuring for rainier board as subset of sequoia..."
-	@ln -s board/amcc/sequoia/Makefile nand_spl/Makefile
-	@echo "#define CONFIG_NAND_U_BOOT" >> include/config.h
+	@echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h
 	@echo "Compile NAND boot image for sequoia"
 	@$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc
-	@echo "TEXT_BASE = 0x01000000" >board/amcc/sequoia/config.tmp
-	@echo "CONFIG_NAND_U_BOOT = y" >> include/config.mk
+	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
+	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 
 sbc405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
@@ -1164,12 +1180,14 @@
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx sequoia amcc
 
 sequoia_nand_config:	unconfig
-	@ln -s board/amcc/sequoia/Makefile nand_spl/Makefile
-	@echo "#define CONFIG_NAND_U_BOOT" >include/config.h
+	@mkdir -p $(obj)include
+	@mkdir -p $(obj)nand_spl
+	@mkdir -p $(obj)board/amcc/sequoia
+	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
 	@echo "Compile NAND boot image for sequoia"
 	@$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc
-	@echo "TEXT_BASE = 0x01000000" >board/amcc/sequoia/config.tmp
-	@echo "CONFIG_NAND_U_BOOT = y" >> include/config.mk
+	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
+	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 
 sycamore_config:	unconfig
 	@echo "Configuring for sycamore board as subset of walnut..."
@@ -1666,6 +1684,14 @@
 	@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx
 
 #########################################################################
+## MPC86xx Systems
+#########################################################################
+
+MPC8641HPCN_config:    unconfig
+	@./mkconfig $(@:_config=) ppc mpc86xx mpc8641hpcn
+
+
+#########################################################################
 ## 74xx/7xx Systems
 #########################################################################
 
@@ -2096,6 +2122,13 @@
 	@echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h
 	@$(MKCONFIG) -a pb1x00 mips mips pb1x00
 
+#========================================================================
+# AVR32
+#========================================================================
+#########################################################################
+## AT32AP7xxx
+#########################################################################
+
 #########################################################################
 ## MIPS64 5Kc
 #########################################################################
@@ -2241,8 +2274,7 @@
 	rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom
 	rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds
 	rm -f $(obj)include/bmp_logo.h
-	find nand_spl -lname "*" -print | xargs rm -f
-	rm -f nand_spl/u-boot-spl nand_spl/u-boot-spl.map
+	rm -f $(obj)nand_spl/u-boot-spl $(obj)nand_spl/u-boot-spl.map
 
 clobber:	clean
 	find $(OBJTREE) -type f \( -name .depend \
@@ -2255,6 +2287,7 @@
 	rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c
 	rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c
 	rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
+	[ ! -d $(OBJTREE)/nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f
 
 ifeq ($(OBJTREE),$(SRCTREE))
 mrproper \
diff --git a/README b/README
index a0949f0..8d876e4 100644
--- a/README
+++ b/README
@@ -132,6 +132,7 @@
   - arm925t	Files specific to ARM 925 CPUs
   - arm926ejs	Files specific to ARM 926 CPUs
   - arm1136	Files specific to ARM 1136 CPUs
+  - at32ap	Files specific to Atmel AVR32 AP CPUs
   - i386	Files specific to i386 CPUs
   - ixp		Files specific to Intel XScale IXP CPUs
   - mcf52x2	Files specific to Freescale ColdFire MCF52x2 CPUs
@@ -156,6 +157,7 @@
 - examples	Example code for standalone applications, etc.
 - include	Header Files
 - lib_arm	Files generic to ARM	 architecture
+- lib_avr32	Files generic to AVR32	 architecture
 - lib_generic	Files generic to all	 architectures
 - lib_i386	Files generic to i386	 architecture
 - lib_m68k	Files generic to m68k	 architecture
@@ -256,6 +258,9 @@
 		----------------------
 		CONFIG_NIOS2
 
+		AVR32 based CPUs:
+		----------------------
+		CONFIG_AT32AP
 
 - Board Type:	Define exactly one of
 
@@ -325,6 +330,15 @@
 		CONFIG_PCI5441 CONFIG_PK1C20
 		CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40
 
+		AVR32 based boards:
+		-------------------
+
+		CONFIG_ATSTK1000
+
+- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
+		Define exactly one of
+		CONFIG_ATSTK1002
+
 
 - CPU Module Type: (if CONFIG_COGENT is defined)
 		Define exactly one of
@@ -447,6 +461,11 @@
 		Board code has addition modification that it wants to make
 		to the flat device tree before handing it off to the kernel
 
+		CONFIG_OF_BOOT_CPU
+
+		This define fills in the correct boot cpu in the boot
+		param header, the default value is zero if undefined.
+
 - Serial Ports:
 		CFG_PL010_SERIAL
 
@@ -2722,9 +2741,9 @@
   4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
   LynxOS, pSOS, QNX, RTEMS, ARTOS;
   Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS).
-* Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
+* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86,
   IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
-  Currently supported: ARM, Intel x86, MIPS, NIOS, PowerPC).
+  Currently supported: ARM, AVR32, Intel x86, MIPS, NIOS, PowerPC).
 * Compression Type (uncompressed, gzip, bzip2)
 * Load Address
 * Entry Point
@@ -3055,6 +3074,55 @@
 
 	bash#
 
+Boot Linux and pass a flat device tree:
+-----------
+
+First, U-Boot must be compiled with the appropriate defines. See the section
+titled "Linux Kernel Interface" above for a more in depth explanation. The
+following is an example of how to start a kernel and pass an updated
+flat device tree:
+
+=> print oftaddr
+oftaddr=0x300000
+=> print oft
+oft=oftrees/mpc8540ads.dtb
+=> tftp $oftaddr $oft
+Speed: 1000, full duplex
+Using TSEC0 device
+TFTP from server 192.168.1.1; our IP address is 192.168.1.101
+Filename 'oftrees/mpc8540ads.dtb'.
+Load address: 0x300000
+Loading: #
+done
+Bytes transferred = 4106 (100a hex)
+=> tftp $loadaddr $bootfile
+Speed: 1000, full duplex
+Using TSEC0 device
+TFTP from server 192.168.1.1; our IP address is 192.168.1.2
+Filename 'uImage'.
+Load address: 0x200000
+Loading:############
+done
+Bytes transferred = 1029407 (fb51f hex)
+=> print loadaddr
+loadaddr=200000
+=> print oftaddr
+oftaddr=0x300000
+=> bootm $loadaddr - $oftaddr
+## Booting image at 00200000 ...
+   Image Name:   Linux-2.6.17-dirty
+   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
+   Data Size:    1029343 Bytes = 1005.2 kB
+   Load Address: 00000000
+   Entry Point:  00000000
+   Verifying Checksum ... OK
+   Uncompressing Kernel Image ... OK
+Booting using flat device tree at 0x300000
+Using MPC85xx ADS machine description
+Memory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb
+[snip]
+
+
 More About U-Boot Image Types:
 ------------------------------
 
diff --git a/avr32_config.mk b/avr32_config.mk
new file mode 100644
index 0000000..0b92053
--- /dev/null
+++ b/avr32_config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2000-2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS	+= -ffixed-r5 -mno-pic -mrelax
+PLATFORM_LDFLAGS	+= --relax
diff --git a/board/amcc/sequoia/Makefile b/board/amcc/sequoia/Makefile
index 9c1be0e..06ef7f9 100644
--- a/board/amcc/sequoia/Makefile
+++ b/board/amcc/sequoia/Makefile
@@ -22,7 +22,6 @@
 #
 
 include $(TOPDIR)/config.mk
-include $(TOPDIR)/include/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk
index 7713a72..e62b8d3 100644
--- a/board/amcc/sequoia/config.mk
+++ b/board/amcc/sequoia/config.mk
@@ -24,7 +24,7 @@
 # AMCC 440EPx Reference Platform (Sequoia) board
 #
 
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
 ifndef TEXT_BASE
 TEXT_BASE = 0xFFFA0000
diff --git a/board/atmel/atstk1000/Makefile b/board/atmel/atstk1000/Makefile
new file mode 100644
index 0000000..22ac02a
--- /dev/null
+++ b/board/atmel/atstk1000/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2005-2006 Atmel Corporation
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o flash.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
new file mode 100644
index 0000000..4d737d2
--- /dev/null
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/sdram.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct sdram_info sdram = {
+	.phys_addr	= CFG_SDRAM_BASE,
+	.row_bits	= 11,
+	.col_bits	= 8,
+	.bank_bits	= 2,
+	.cas		= 3,
+	.twr		= 2,
+	.trc		= 7,
+	.trp		= 2,
+	.trcd		= 2,
+	.tras		= 5,
+	.txsr		= 5,
+};
+
+void board_init_memories(void)
+{
+	gd->sdram_size = sdram_init(&sdram);
+}
+
+void board_init_info(void)
+{
+	gd->bd->bi_phy_id[0] = 0x10;
+	gd->bd->bi_phy_id[1] = 0x11;
+}
diff --git a/board/atmel/atstk1000/config.mk b/board/atmel/atstk1000/config.mk
new file mode 100644
index 0000000..ec3618d
--- /dev/null
+++ b/board/atmel/atstk1000/config.mk
@@ -0,0 +1,4 @@
+PLATFORM_RELFLAGS	+= -ffunction-sections -fdata-sections
+PLATFORM_LDFLAGS	+= --gc-sections
+TEXT_BASE		= 0x00000000
+LDSCRIPT		= $(obj)board/atmel/atstk1000/u-boot.lds
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
new file mode 100644
index 0000000..3aebf66
--- /dev/null
+++ b/board/atmel/atstk1000/flash.c
@@ -0,0 +1,223 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CONFIG_ATSTK1000_EXT_FLASH
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+flash_info_t flash_info[1];
+
+static void __flashprog flash_identify(uint16_t *flash, flash_info_t *info)
+{
+	unsigned long flags;
+
+	flags = disable_interrupts();
+
+	dcache_flush_unlocked();
+
+	writew(0xaa, flash + 0x555);
+	writew(0x55, flash + 0xaaa);
+	writew(0x90, flash + 0x555);
+	info->flash_id = readl(flash);
+	writew(0xff, flash);
+
+	readw(flash);
+
+	if (flags)
+		enable_interrupts();
+}
+
+unsigned long flash_init(void)
+{
+	unsigned long addr;
+	unsigned int i;
+
+	gd->bd->bi_flashstart = CFG_FLASH_BASE;
+	gd->bd->bi_flashsize = CFG_FLASH_SIZE;
+	gd->bd->bi_flashoffset = __edata_lma - _text;
+
+	flash_info[0].size = CFG_FLASH_SIZE;
+	flash_info[0].sector_count = 135;
+
+	flash_identify(uncached((void *)CFG_FLASH_BASE), &flash_info[0]);
+
+	for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
+		flash_info[0].start[i] = addr;
+	for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
+		flash_info[0].start[i] = addr;
+
+	return CFG_FLASH_SIZE;
+}
+
+void flash_print_info(flash_info_t *info)
+{
+	printf("Flash: Vendor ID: 0x%02x, Product ID: 0x%02x\n",
+	       info->flash_id >> 16, info->flash_id & 0xffff);
+	printf("Size: %ld MB in %d sectors\n",
+	       info->size >> 10, info->sector_count);
+}
+
+int __flashprog flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+	unsigned long flags;
+	unsigned long start_time;
+	uint16_t *fb, *sb;
+	unsigned int i;
+	int ret;
+	uint16_t status;
+
+	if ((s_first < 0) || (s_first > s_last)
+	    || (s_last >= info->sector_count)) {
+		puts("Error: first and/or last sector out of range\n");
+		return ERR_INVAL;
+	}
+
+	for (i = s_first; i < s_last; i++)
+		if (info->protect[i]) {
+			printf("Error: sector %d is protected\n", i);
+			return ERR_PROTECTED;
+		}
+
+	fb = (uint16_t *)uncached(info->start[0]);
+
+	dcache_flush_unlocked();
+
+	for (i = s_first; (i <= s_last) && !ctrlc(); i++) {
+		printf("Erasing sector %3d...", i);
+
+		sb = (uint16_t *)uncached(info->start[i]);
+
+		flags = disable_interrupts();
+
+		start_time = get_timer(0);
+
+		/* Unlock sector */
+		writew(0xaa, fb + 0x555);
+		writew(0x70, sb);
+
+		/* Erase sector */
+		writew(0xaa, fb + 0x555);
+		writew(0x55, fb + 0xaaa);
+		writew(0x80, fb + 0x555);
+		writew(0xaa, fb + 0x555);
+		writew(0x55, fb + 0xaaa);
+		writew(0x30, sb);
+
+		/* Wait for completion */
+		ret = ERR_OK;
+		do {
+			/* TODO: Timeout */
+			status = readw(sb);
+		} while ((status != 0xffff) && !(status & 0x28));
+
+		writew(0xf0, fb);
+
+		/*
+		 * Make sure the command actually makes it to the bus
+		 * before we re-enable interrupts.
+		 */
+		readw(fb);
+
+		if (flags)
+			enable_interrupts();
+
+		if (status != 0xffff) {
+			printf("Flash erase error at address 0x%p: 0x%02x\n",
+			       sb, status);
+			ret = ERR_PROG_ERROR;
+			break;
+		}
+	}
+
+	if (ctrlc())
+		printf("User interrupt!\n");
+
+	return ERR_OK;
+}
+
+int __flashprog write_buff(flash_info_t *info, uchar *src,
+			   ulong addr, ulong count)
+{
+	unsigned long flags;
+	uint16_t *base, *p, *s, *end;
+	uint16_t word, status;
+	int ret = ERR_OK;
+
+	if (addr < info->start[0]
+	    || (addr + count) > (info->start[0] + info->size)
+	    || (addr + count) < addr) {
+		puts("Error: invalid address range\n");
+		return ERR_INVAL;
+	}
+
+	if (addr & 1 || count & 1 || (unsigned int)src & 1) {
+		puts("Error: misaligned source, destination or count\n");
+		return ERR_ALIGN;
+	}
+
+	base = (uint16_t *)uncached(info->start[0]);
+	end = (uint16_t *)uncached(addr + count);
+
+	flags = disable_interrupts();
+
+	dcache_flush_unlocked();
+	sync_write_buffer();
+
+	for (p = (uint16_t *)uncached(addr), s = (uint16_t *)src;
+	     p < end && !ctrlc(); p++, s++) {
+		word = *s;
+
+		writew(0xaa, base + 0x555);
+		writew(0x55, base + 0xaaa);
+		writew(0xa0, base + 0x555);
+		writew(word, p);
+
+		sync_write_buffer();
+
+		/* Wait for completion */
+		do {
+			/* TODO: Timeout */
+			status = readw(p);
+		} while ((status != word) && !(status & 0x28));
+
+		writew(0xf0, base);
+		readw(base);
+
+		if (status != word) {
+			printf("Flash write error at address 0x%p: 0x%02x\n",
+			       p, status);
+			ret = ERR_PROG_ERROR;
+			break;
+		}
+	}
+
+	if (flags)
+		enable_interrupts();
+
+	return ret;
+}
+
+#endif /* CONFIG_ATSTK1000_EXT_FLASH */
diff --git a/board/atmel/atstk1000/u-boot.lds.S b/board/atmel/atstk1000/u-boot.lds.S
new file mode 100644
index 0000000..d46b82c
--- /dev/null
+++ b/board/atmel/atstk1000/u-boot.lds.S
@@ -0,0 +1,79 @@
+/* -*- Fundamental -*-
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+
+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
+OUTPUT_ARCH(avr32)
+ENTRY(_start)
+
+SECTIONS
+{
+	. = CFG_FLASH_BASE;
+	_text = .;
+	.text : {
+		*(.text)
+		*(.text.*)
+	}
+
+	. = ALIGN(CFG_ICACHE_LINESZ);
+	__flashprog_start = .;
+	.flashprog : {
+		*(.flashprog)
+	}
+	. = ALIGN(CFG_ICACHE_LINESZ);
+	__flashprog_end = .;
+
+	. = ALIGN(8);
+	.rodata : {
+		*(.rodata)
+		*(.rodata.*)
+	}
+	_etext = .;
+
+	__data_lma = ALIGN(8);
+	. = CFG_INTRAM_BASE;
+	_data = .;
+	.data : AT(__data_lma) {
+		*(.data)
+		*(.data.*)
+	}
+
+	. = ALIGN(4);
+	__u_boot_cmd_start = .;
+	__u_boot_cmd_lma = __data_lma + (__u_boot_cmd_start - _data);
+	.u_boot_cmd : AT(__u_boot_cmd_lma) {
+		KEEP(*(.u_boot_cmd))
+	}
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(8);
+	_edata = .;
+	__edata_lma = __u_boot_cmd_lma + (_edata - __u_boot_cmd_start);
+
+	.bss : AT(__edata_lma) {
+		*(.bss)
+		*(.bss.*)
+	}
+	. = ALIGN(8);
+	_end = .;
+}
diff --git a/board/cds/common/ft_board.c b/board/cds/common/ft_board.c
new file mode 100644
index 0000000..9d97905
--- /dev/null
+++ b/board/cds/common/ft_board.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#include "cadmus.h"
+
+extern void ft_cpu_setup(void *blob, bd_t *bd);
+
+static void cds_pci_fixup(void *blob)
+{
+	int len;
+	u32 *map;
+	int slot;
+	int i;
+
+	map = ft_get_prop(blob, "/" OF_SOC "/pci@8000/interrupt-map", &len);
+
+	len /= sizeof(u32);
+
+	slot = get_pci_slot();
+
+	for (i=0;i<len;i+=7) {
+		/* We rotate the interrupt pins so that the mapping
+		 * changes depending on the slot the carrier card is in.
+		 */
+		map[3] = ((map[3] + slot - 2) % 4) + 1;
+
+		map+=7;
+	}
+}
+#endif
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+#ifdef CONFIG_PCI
+	ft_pci_setup(blob, bd);
+#endif
+	ft_cpu_setup(blob, bd);
+
+	p = ft_get_prop(blob, "/memory/reg", &len);
+	if (p != NULL) {
+		*p++ = cpu_to_be32(bd->bi_memstart);
+		*p = cpu_to_be32(bd->bi_memsize);
+	}
+
+	cds_pci_fixup(blob);
+}
+#endif
diff --git a/board/cds/common/via.c b/board/cds/common/via.c
new file mode 100644
index 0000000..e79bd02
--- /dev/null
+++ b/board/cds/common/via.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2006 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+
+/* Config the VIA chip */
+void mpc85xx_config_via(struct pci_controller *hose,
+			pci_dev_t dev, struct pci_config_table *tab)
+{
+	pci_dev_t bridge;
+
+	/* Enable USB and IDE functions */
+	pci_hose_write_config_byte(hose, dev, 0x48, 0x08);
+
+	pciauto_config_device(hose, dev);
+
+	/*
+	 * Force the backplane P2P bridge to have a window
+	 * open from 0x00000000-0x00001fff in PCI I/O space.
+	 * This allows legacy I/O (i8259, etc) on the VIA
+	 * southbridge to be accessed.
+	 */
+	bridge = PCI_BDF(0,17,0);
+	pci_hose_write_config_byte(hose, bridge, PCI_IO_BASE, 0);
+	pci_hose_write_config_word(hose, bridge, PCI_IO_BASE_UPPER16, 0);
+	pci_hose_write_config_byte(hose, bridge, PCI_IO_LIMIT, 0x10);
+	pci_hose_write_config_word(hose, bridge, PCI_IO_LIMIT_UPPER16, 0);
+}
+
+/* Function 1, IDE */
+void mpc85xx_config_via_usbide(struct pci_controller *hose,
+			       pci_dev_t dev, struct pci_config_table *tab)
+{
+	pciauto_config_device(hose, dev);
+	/*
+	 * Since the P2P window was forced to cover the fixed
+	 * legacy I/O addresses, it is necessary to manually
+	 * place the base addresses for the IDE and USB functions
+	 * within this window.
+	 */
+	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1ff8);
+	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1ff4);
+	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1fe8);
+	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_3, 0x1fe4);
+	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fd0);
+}
+
+/* Function 2, USB ports 0-1 */
+void mpc85xx_config_via_usb(struct pci_controller *hose,
+			    pci_dev_t dev, struct pci_config_table *tab)
+{
+	pciauto_config_device(hose, dev);
+
+	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fa0);
+}
+
+/* Function 3, USB ports 2-3 */
+void mpc85xx_config_via_usb2(struct pci_controller *hose,
+			     pci_dev_t dev, struct pci_config_table *tab)
+{
+	pciauto_config_device(hose, dev);
+
+	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1f80);
+}
+
+/* Function 5, Power Management */
+void mpc85xx_config_via_power(struct pci_controller *hose,
+			      pci_dev_t dev, struct pci_config_table *tab)
+{
+	pciauto_config_device(hose, dev);
+
+	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1e00);
+	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1dfc);
+	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1df8);
+}
+
+/* Function 6, AC97 Interface */
+void mpc85xx_config_via_ac97(struct pci_controller *hose,
+			     pci_dev_t dev, struct pci_config_table *tab)
+{
+	pciauto_config_device(hose, dev);
+
+	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1c00);
+}
diff --git a/board/cds/common/via.h b/board/cds/common/via.h
new file mode 100644
index 0000000..77cfacc
--- /dev/null
+++ b/board/cds/common/via.h
@@ -0,0 +1,18 @@
+#ifndef _MPC85xx_VIA_H
+void mpc85xx_config_via(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
+
+/* Function 1, IDE */
+void mpc85xx_config_via_usbide(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
+
+/* Function 2, USB ports 0-1 */
+void mpc85xx_config_via_usb(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
+
+/* Function 3, USB ports 2-3 */
+void mpc85xx_config_via_usb2(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
+
+/* Function 5, Power Management */
+void mpc85xx_config_via_power(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
+
+/* Function 6, AC97 Interface */
+void mpc85xx_config_via_ac97(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
+#endif /* _MPC85xx_VIA_H */
diff --git a/board/cds/mpc8541cds/Makefile b/board/cds/mpc8541cds/Makefile
index d65eb1b..7f53098 100644
--- a/board/cds/mpc8541cds/Makefile
+++ b/board/cds/mpc8541cds/Makefile
@@ -31,7 +31,9 @@
 
 COBJS	:= $(BOARD).o \
 	   ../common/cadmus.o \
-	   ../common/eeprom.o
+	   ../common/eeprom.o \
+	   ../common/ft_board.o \
+	   ../common/via.o
 
 SOBJS	:= init.o
 
diff --git a/board/cds/mpc8541cds/init.S b/board/cds/mpc8541cds/init.S
index 53dcd0d..978bda5 100644
--- a/board/cds/mpc8541cds/init.S
+++ b/board/cds/mpc8541cds/init.S
@@ -210,8 +210,8 @@
  * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
  * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
  * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
- * 0xe300_0000     0xe3ff_ffff     PCI2 IO                 16M
+ * 0xe200_0000     0xe20f_ffff     PCI1 IO                 1M
+ * 0xe210_0000     0xe21f_ffff     PCI2 IO                 1M
  * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
  * 0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
  * 0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
@@ -234,11 +234,11 @@
 #define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
 #define LAWAR2 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
 
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
+#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
 
-#define LAWBAR4 ((CFG_PCI2_IO_BASE>>12) & 0xfffff)
-#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
+#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
 
 /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
 #define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
diff --git a/board/cds/mpc8541cds/mpc8541cds.c b/board/cds/mpc8541cds/mpc8541cds.c
index 6b8aa68..a42904c 100644
--- a/board/cds/mpc8541cds/mpc8541cds.c
+++ b/board/cds/mpc8541cds/mpc8541cds.c
@@ -31,6 +31,7 @@
 
 #include "../common/cadmus.h"
 #include "../common/eeprom.h"
+#include "../common/via.h"
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
@@ -468,26 +469,25 @@
 #endif
 
 #if defined(CONFIG_PCI)
-
-/*
- * Initialize PCI Devices, report devices found.
+/* For some reason the Tundra PCI bridge shows up on itself as a
+ * different device.  Work around that by refusing to configure it.
  */
+void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
 
-#ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_mpc85xxcds_config_table[] = {
-    { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-      PCI_IDSEL_NUMBER, PCI_ANY_ID,
-      pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
-				   PCI_ENET0_MEMADDR,
-				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
-      } },
-    { }
+	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
+	{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
+	{0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
+	{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
+	{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
+	{0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
+	{0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
 };
-#endif
 
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table: pci_mpc85xxcds_config_table,
+static struct pci_controller hose[] = {
+	{ config_table: pci_mpc85xxcds_config_table,},
+#ifdef CONFIG_MPC85XX_PCI2
+	{},
 #endif
 };
 
@@ -497,8 +497,6 @@
 pci_init_board(void)
 {
 #ifdef CONFIG_PCI
-	extern void pci_mpc85xx_init(struct pci_controller *hose);
-
-	pci_mpc85xx_init(&hose);
+	pci_mpc85xx_init(hose);
 #endif
 }
diff --git a/board/cds/mpc8548cds/Makefile b/board/cds/mpc8548cds/Makefile
index d65eb1b..7f53098 100644
--- a/board/cds/mpc8548cds/Makefile
+++ b/board/cds/mpc8548cds/Makefile
@@ -31,7 +31,9 @@
 
 COBJS	:= $(BOARD).o \
 	   ../common/cadmus.o \
-	   ../common/eeprom.o
+	   ../common/eeprom.o \
+	   ../common/ft_board.o \
+	   ../common/via.o
 
 SOBJS	:= init.o
 
diff --git a/board/cds/mpc8548cds/init.S b/board/cds/mpc8548cds/init.S
index 53dcd0d..978bda5 100644
--- a/board/cds/mpc8548cds/init.S
+++ b/board/cds/mpc8548cds/init.S
@@ -210,8 +210,8 @@
  * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
  * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
  * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
- * 0xe300_0000     0xe3ff_ffff     PCI2 IO                 16M
+ * 0xe200_0000     0xe20f_ffff     PCI1 IO                 1M
+ * 0xe210_0000     0xe21f_ffff     PCI2 IO                 1M
  * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
  * 0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
  * 0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
@@ -234,11 +234,11 @@
 #define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
 #define LAWAR2 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
 
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
+#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
 
-#define LAWBAR4 ((CFG_PCI2_IO_BASE>>12) & 0xfffff)
-#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
+#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
 
 /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
 #define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c
index 5bc0890..7433ebf 100644
--- a/board/cds/mpc8548cds/mpc8548cds.c
+++ b/board/cds/mpc8548cds/mpc8548cds.c
@@ -27,9 +27,11 @@
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
 #include <spd.h>
+#include <miiphy.h>
 
 #include "../common/cadmus.h"
 #include "../common/eeprom.h"
+#include "../common/via.h"
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
@@ -293,26 +295,25 @@
 #endif
 
 #if defined(CONFIG_PCI)
-
-/*
- * Initialize PCI Devices, report devices found.
+/* For some reason the Tundra PCI bridge shows up on itself as a
+ * different device.  Work around that by refusing to configure it.
  */
+void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
 
-#ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_mpc85xxcds_config_table[] = {
-    { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-      PCI_IDSEL_NUMBER, PCI_ANY_ID,
-      pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
-				   PCI_ENET0_MEMADDR,
-				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
-      } },
-    { }
+	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
+	{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
+	{0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
+	{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
+	{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
+	{0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
+	{0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
 };
-#endif
 
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table: pci_mpc85xxcds_config_table,
+static struct pci_controller hose[] = {
+	{ config_table: pci_mpc85xxcds_config_table,},
+#ifdef CONFIG_MPC85XX_PCI2
+	{},
 #endif
 };
 
@@ -322,8 +323,37 @@
 pci_init_board(void)
 {
 #ifdef CONFIG_PCI
-	extern void pci_mpc85xx_init(struct pci_controller *hose);
-
 	pci_mpc85xx_init(&hose);
 #endif
 }
+
+int last_stage_init(void)
+{
+	unsigned short temp;
+
+	/* Change the resistors for the PHY */
+	/* This is needed to get the RGMII working for the 1.3+
+	 * CDS cards */
+	if (get_board_version() ==  0x13) {
+		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+				TSEC1_PHY_ADDR, 29, 18);
+
+		miiphy_read(CONFIG_MPC85XX_TSEC1_NAME,
+				TSEC1_PHY_ADDR, 30, &temp);
+
+		temp = (temp & 0xf03f);
+		temp |= 2 << 9;		/* 36 ohm */
+		temp |= 2 << 6;		/* 39 ohm */
+
+		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+				TSEC1_PHY_ADDR, 30, temp);
+
+		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+				TSEC1_PHY_ADDR, 29, 3);
+
+		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+				TSEC1_PHY_ADDR, 30, 0x8000);
+	}
+
+	return 0;
+}
diff --git a/board/cds/mpc8555cds/Makefile b/board/cds/mpc8555cds/Makefile
index d65eb1b..7f53098 100644
--- a/board/cds/mpc8555cds/Makefile
+++ b/board/cds/mpc8555cds/Makefile
@@ -31,7 +31,9 @@
 
 COBJS	:= $(BOARD).o \
 	   ../common/cadmus.o \
-	   ../common/eeprom.o
+	   ../common/eeprom.o \
+	   ../common/ft_board.o \
+	   ../common/via.o
 
 SOBJS	:= init.o
 
diff --git a/board/cds/mpc8555cds/init.S b/board/cds/mpc8555cds/init.S
index 53dcd0d..978bda5 100644
--- a/board/cds/mpc8555cds/init.S
+++ b/board/cds/mpc8555cds/init.S
@@ -210,8 +210,8 @@
  * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
  * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
  * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
- * 0xe300_0000     0xe3ff_ffff     PCI2 IO                 16M
+ * 0xe200_0000     0xe20f_ffff     PCI1 IO                 1M
+ * 0xe210_0000     0xe21f_ffff     PCI2 IO                 1M
  * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
  * 0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
  * 0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
@@ -234,11 +234,11 @@
 #define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
 #define LAWAR2 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
 
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
+#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
 
-#define LAWBAR4 ((CFG_PCI2_IO_BASE>>12) & 0xfffff)
-#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
+#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
 
 /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
 #define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
diff --git a/board/cds/mpc8555cds/mpc8555cds.c b/board/cds/mpc8555cds/mpc8555cds.c
index 18adf5b..d980ea6 100644
--- a/board/cds/mpc8555cds/mpc8555cds.c
+++ b/board/cds/mpc8555cds/mpc8555cds.c
@@ -29,6 +29,7 @@
 
 #include "../common/cadmus.h"
 #include "../common/eeprom.h"
+#include "../common/via.h"
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
@@ -464,38 +465,38 @@
 }
 #endif
 
-#if defined(CONFIG_PCI)
-
-/*
- * Initialize PCI Devices, report devices found.
+#ifdef CONFIG_PCI
+/* For some reason the Tundra PCI bridge shows up on itself as a
+ * different device.  Work around that by refusing to configure it
  */
+void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
 
-#ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_mpc85xxcds_config_table[] = {
-    { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-      PCI_IDSEL_NUMBER, PCI_ANY_ID,
-      pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
-				   PCI_ENET0_MEMADDR,
-				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
-      } },
-    { }
+	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
+	{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
+	{0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
+	{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
+	{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
+	{0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
+	{0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
 };
-#endif
 
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
+
+static struct pci_controller hose[] = {
+	{
 	config_table: pci_mpc85xxcds_config_table,
+	},
+#ifdef CONFIG_MPC85XX_PCI2
+	{ }
 #endif
 };
 
-#endif	/* CONFIG_PCI */
+#endif
 
 void
 pci_init_board(void)
 {
 #ifdef CONFIG_PCI
-	extern void pci_mpc85xx_init(struct pci_controller *hose);
-
-	pci_mpc85xx_init(&hose);
+	pci_mpc85xx_init(hose);
 #endif
 }
diff --git a/board/ep82xxm/ep82xxm.c b/board/ep82xxm/ep82xxm.c
index 35e644d..fe3f78e 100644
--- a/board/ep82xxm/ep82xxm.c
+++ b/board/ep82xxm/ep82xxm.c
@@ -227,8 +227,6 @@
 #ifndef CFG_RAMBOOT
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
-	vu_char *ramaddr = (vu_char *)CFG_SDRAM_BASE;
-	uchar c = 0xFF;
 	uint psdmr = CFG_PSDMR;
 	int i;
 
diff --git a/board/mpc8540ads/mpc8540ads.c b/board/mpc8540ads/mpc8540ads.c
index d0eb690..914e51a 100644
--- a/board/mpc8540ads/mpc8540ads.c
+++ b/board/mpc8540ads/mpc8540ads.c
@@ -31,6 +31,11 @@
 #include <asm/immap_85xx.h>
 #include <spd.h>
 
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
+
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
@@ -311,24 +316,8 @@
  * Initialize PCI Devices, report devices found.
  */
 
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc85xxads_config_table[] = {
-    { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-      PCI_IDSEL_NUMBER, PCI_ANY_ID,
-      pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
-				   PCI_ENET0_MEMADDR,
-				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
-      } },
-    { }
-};
-#endif
 
-
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table: pci_mpc85xxads_config_table,
-#endif
-};
+static struct pci_controller hose;
 
 #endif	/* CONFIG_PCI */
 
@@ -337,8 +326,27 @@
 pci_init_board(void)
 {
 #ifdef CONFIG_PCI
-	extern void pci_mpc85xx_init(struct pci_controller *hose);
-
 	pci_mpc85xx_init(&hose);
 #endif /* CONFIG_PCI */
 }
+
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+#ifdef CONFIG_PCI
+	ft_pci_setup(blob, bd);
+#endif
+	ft_cpu_setup(blob, bd);
+
+	p = ft_get_prop(blob, "/memory/reg", &len);
+	if (p != NULL) {
+		*p++ = cpu_to_be32(bd->bi_memstart);
+		*p = cpu_to_be32(bd->bi_memsize);
+	}
+}
+#endif
diff --git a/board/mpc8560ads/mpc8560ads.c b/board/mpc8560ads/mpc8560ads.c
index 25f69a0b..d19bad6 100644
--- a/board/mpc8560ads/mpc8560ads.c
+++ b/board/mpc8560ads/mpc8560ads.c
@@ -33,6 +33,10 @@
 #include <spd.h>
 #include <miiphy.h>
 
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
@@ -539,8 +543,15 @@
 pci_init_board(void)
 {
 #ifdef CONFIG_PCI
-	extern void pci_mpc85xx_init(struct pci_controller *hose);
-
 	pci_mpc85xx_init(&hose);
 #endif /* CONFIG_PCI */
 }
+
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+}
+#endif
diff --git a/board/mpc8560ads/u-boot.lds b/board/mpc8560ads/u-boot.lds
index 8dcee1f..726a153 100644
--- a/board/mpc8560ads/u-boot.lds
+++ b/board/mpc8560ads/u-boot.lds
@@ -74,7 +74,6 @@
     cpu/mpc85xx/cpu_init.o (.text)
     cpu/mpc85xx/cpu.o (.text)
     cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/i2c.o (.text)
     cpu/mpc85xx/spd_sdram.o (.text)
     common/dlmalloc.o (.text)
     lib_generic/crc32.o (.text)
diff --git a/board/mpc8641hpcn/Makefile b/board/mpc8641hpcn/Makefile
new file mode 100644
index 0000000..4b68c36
--- /dev/null
+++ b/board/mpc8641hpcn/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o pixis.o sys_eeprom.o
+SOBJS	:= init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+.PHONY: distclean
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude ($obj).depend
+
+#########################################################################
diff --git a/board/mpc8641hpcn/config.mk b/board/mpc8641hpcn/config.mk
new file mode 100644
index 0000000..989a40b
--- /dev/null
+++ b/board/mpc8641hpcn/config.mk
@@ -0,0 +1,31 @@
+# Copyright 2004 Freescale Semiconductor.
+# Modified by Jeff Brown
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# mpc8641hpcn board
+# default CCSRBAR is at 0xff700000
+# assume U-Boot is less than 0.5MB
+#
+TEXT_BASE = 0xfff01000
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float
diff --git a/board/mpc8641hpcn/init.S b/board/mpc8641hpcn/init.S
new file mode 100644
index 0000000..6b3e2d2
--- /dev/null
+++ b/board/mpc8641hpcn/init.S
@@ -0,0 +1,179 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * Jeff Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc86xx.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000     0x7fff_ffff     DDR                     2G
+ * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
+ * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
+ * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
+ * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
+ * 0xe300_0000     0xe3ff_ffff     PCI2 IO                 16M
+ * 0xf800_0000     0xf80f_ffff     CCSRBAR                 1M
+ * 0xf810_0000     0xf81f_ffff     PIXIS                   1M
+ * 0xfe00_0000     0xffff_ffff     FLASH (boot bank)       32M
+ *
+ * Notes:
+ *    CCSRBAR don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+#if !defined(CONFIG_SPD_EEPROM)
+#define LAWBAR1 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff)
+#define LAWAR1	(LAWAR_EN | LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+#else
+#define LAWBAR1 0
+#define LAWAR1  ((LAWAR_TRGT_IF_DDR1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN)
+#endif
+
+#define LAWBAR2 ((CFG_PCI1_MEM_BASE>>12) & 0xffffff)
+#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
+#define LAWBAR3 ((CFG_PCI2_MEM_BASE>>12) & 0xffffff)
+#define LAWAR3	(~LAWAR_EN & (LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)))
+
+/*
+ * This is not so much the SDRAM map as it is the whole localbus map.
+ */
+#define LAWBAR4 ((0xf8100000>>12) & 0xffffff)
+#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_2M))
+
+#define LAWBAR5 ((CFG_PCI1_IO_BASE>>12) & 0xffffff)
+#define LAWAR5	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+
+#define LAWBAR6 ((CFG_PCI2_IO_BASE>>12) & 0xffffff)
+#define LAWAR6	(~LAWAR_EN &( LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M)))
+
+#define LAWBAR7 ((0xfe000000 >>12) & 0xffffff)
+#define LAWAR7	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_32M))
+
+#if !defined(CONFIG_SPD_EEPROM)
+#define LAWBAR8 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff)
+#define LAWAR8 (LAWAR_EN | LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+#else
+#define LAWBAR8 0
+#define LAWAR8  ((LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN)
+#endif
+
+#define LAWBAR9 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
+#define LAWAR9  (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
+	.section .bootpg, "ax"
+	.globl	law_entry
+law_entry:
+	lis	r7,CFG_CCSRBAR@h
+	ori	r7,r7,CFG_CCSRBAR@l
+
+	addi    r4,r7,0
+	addi    r5,r7,0
+
+	/* Skip LAWAR0, start at LAWAR1 */
+	lis     r6,LAWBAR1@h
+	ori     r6,r6,LAWBAR1@l
+	stwu    r6, 0xc28(r4)
+
+	lis     r6,LAWAR1@h
+	ori     r6,r6,LAWAR1@l
+	stwu    r6, 0xc30(r5)
+
+	/* LAWBAR2, LAWAR2 */
+	lis     r6,LAWBAR2@h
+	ori     r6,r6,LAWBAR2@l
+	stwu    r6, 0x20(r4)
+
+	lis     r6,LAWAR2@h
+	ori     r6,r6,LAWAR2@l
+	stwu    r6, 0x20(r5)
+
+	/* LAWBAR3, LAWAR3 */
+	lis     r6,LAWBAR3@h
+	ori     r6,r6,LAWBAR3@l
+	stwu    r6, 0x20(r4)
+
+	lis     r6,LAWAR3@h
+	ori     r6,r6,LAWAR3@l
+	stwu    r6, 0x20(r5)
+
+	/* LAWBAR4, LAWAR4 */
+	lis     r6,LAWBAR4@h
+	ori     r6,r6,LAWBAR4@l
+	stwu    r6, 0x20(r4)
+
+	lis     r6,LAWAR4@h
+	ori     r6,r6,LAWAR4@l
+	stwu    r6, 0x20(r5)
+	/* LAWBAR5, LAWAR5 */
+	lis     r6,LAWBAR5@h
+	ori     r6,r6,LAWBAR5@l
+	stwu    r6, 0x20(r4)
+
+	lis     r6,LAWAR5@h
+	ori     r6,r6,LAWAR5@l
+	stwu    r6, 0x20(r5)
+
+	/* LAWBAR6, LAWAR6 */
+	lis     r6,LAWBAR6@h
+	ori     r6,r6,LAWBAR6@l
+	stwu    r6, 0x20(r4)
+
+	lis     r6,LAWAR6@h
+	ori     r6,r6,LAWAR6@l
+	stwu    r6, 0x20(r5)
+
+	/* LAWBAR7, LAWAR7 */
+	lis     r6,LAWBAR7@h
+	ori     r6,r6,LAWBAR7@l
+	stwu    r6, 0x20(r4)
+
+	lis     r6,LAWAR7@h
+	ori     r6,r6,LAWAR7@l
+	stwu    r6, 0x20(r5)
+
+	/* LAWBAR8, LAWAR8 */
+	lis     r6,LAWBAR8@h
+	ori     r6,r6,LAWBAR8@l
+	stwu    r6, 0x20(r4)
+
+	lis     r6,LAWAR8@h
+	ori     r6,r6,LAWAR8@l
+	stwu    r6, 0x20(r5)
+
+	/* LAWBAR9, LAWAR9 */
+	lis     r6,LAWBAR9@h
+	ori     r6,r6,LAWBAR9@l
+	stwu    r6, 0x20(r4)
+
+	lis     r6,LAWAR9@h
+	ori     r6,r6,LAWAR9@l
+	stwu    r6, 0x20(r5)
+
+	blr
diff --git a/board/mpc8641hpcn/mpc8641hpcn.c b/board/mpc8641hpcn/mpc8641hpcn.c
new file mode 100644
index 0000000..b2cf4a9
--- /dev/null
+++ b/board/mpc8641hpcn/mpc8641hpcn.c
@@ -0,0 +1,426 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * Jeff Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_86xx.h>
+#include <spd.h>
+
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+extern void ft_cpu_setup(void *blob, bd_t *bd);
+#endif
+
+#include "pixis.h"
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+#if defined(CONFIG_SPD_EEPROM)
+#include "spd_sdram.h"
+#endif
+
+void sdram_init(void);
+long int fixed_sdram(void);
+
+
+int board_early_init_f(void)
+{
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: MPC8641HPCN\n");
+
+#ifdef CONFIG_PCI
+
+	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile ccsr_pex_t *pex1 = &immap->im_pex1;
+
+	uint devdisr = gur->devdisr;
+	uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
+	uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
+	uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
+
+	if ((io_sel == 2 || io_sel == 3 || io_sel == 5
+	     || io_sel == 6 || io_sel == 7 || io_sel == 0xF)
+	    && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
+		debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
+		debug("0x%08x=0x%08x ", &pex1->pme_msg_det, pex1->pme_msg_det);
+		if (pex1->pme_msg_det) {
+			pex1->pme_msg_det = 0xffffffff;
+			debug(" with errors.  Clearing.  Now 0x%08x",
+			      pex1->pme_msg_det);
+		}
+		debug("\n");
+	} else {
+		puts("PCI-EXPRESS 1: Disabled\n");
+	}
+
+#else
+	puts("PCI-EXPRESS1: Disabled\n");
+#endif
+
+	return 0;
+}
+
+
+long int
+initdram(int board_type)
+{
+	long dram_size = 0;
+
+#if defined(CONFIG_SPD_EEPROM)
+	dram_size = spd_sdram();
+#else
+	dram_size = fixed_sdram();
+#endif
+
+#if defined(CFG_RAMBOOT)
+	puts("    DDR: ");
+	return dram_size;
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/*
+	 * Initialize and enable DDR ECC.
+	 */
+	ddr_enable_ecc(dram_size);
+#endif
+
+	puts("    DDR: ");
+	return dram_size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	puts("SDRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	puts("SDRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	puts("SDRAM test passed.\n");
+	return 0;
+}
+#endif
+
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+long int
+fixed_sdram(void)
+{
+#if !defined(CFG_RAMBOOT)
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
+
+	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
+	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+	ddr->ext_refrec = CFG_DDR_EXT_REFRESH;
+	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
+	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
+	ddr->sdram_mode_1 = CFG_DDR_MODE_1;
+	ddr->sdram_mode_2 = CFG_DDR_MODE_2;
+	ddr->sdram_interval = CFG_DDR_INTERVAL;
+	ddr->sdram_data_init = CFG_DDR_DATA_INIT;
+	ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
+	ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
+	ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS;
+
+#if defined (CONFIG_DDR_ECC)
+	ddr->err_disable = 0x0000008D;
+	ddr->err_sbe = 0x00ff0000;
+#endif
+	asm("sync;isync");
+
+	udelay(500);
+
+#if defined (CONFIG_DDR_ECC)
+	/* Enable ECC checking */
+	ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000);
+#else
+	ddr->sdram_cfg_1 = CFG_DDR_CONTROL;
+	ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
+#endif
+	asm("sync; isync");
+
+	udelay(500);
+#endif
+	return CFG_SDRAM_SIZE * 1024 * 1024;
+}
+#endif	/* !defined(CONFIG_SPD_EEPROM) */
+
+
+#if defined(CONFIG_PCI)
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_fsl86xxads_config_table[] = {
+	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
+	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+				     PCI_ENET0_MEMADDR,
+				     PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
+	{}
+};
+#endif
+
+
+static struct pci_controller hose = {
+#ifndef CONFIG_PCI_PNP
+      config_table:pci_mpc86xxcts_config_table,
+#endif
+};
+
+#endif /* CONFIG_PCI */
+
+void pci_init_board(void)
+{
+#ifdef CONFIG_PCI
+	extern void pci_mpc86xx_init(struct pci_controller *hose);
+
+	pci_mpc86xx_init(&hose);
+#endif /* CONFIG_PCI */
+}
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+	ft_cpu_setup(blob, bd);
+
+	p = ft_get_prop(blob, "/memory/reg", &len);
+	if (p != NULL) {
+		*p++ = cpu_to_be32(bd->bi_memstart);
+		*p = cpu_to_be32(bd->bi_memsize);
+	}
+}
+#endif
+
+
+void
+mpc8641_reset_board(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	char cmd;
+	ulong val;
+	ulong corepll;
+
+	/*
+	 * No args is a simple reset request.
+	 */
+	if (argc <= 1) {
+		out8(PIXIS_BASE + PIXIS_RST, 0);
+		/* not reached */
+	}
+
+	cmd = argv[1][1];
+	switch (cmd) {
+	case 'f':		/* reset with frequency changed */
+		if (argc < 5)
+			goto my_usage;
+		read_from_px_regs(0);
+
+		val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));
+
+		corepll = strfractoint(argv[3]);
+		val = val + set_px_corepll(corepll);
+		val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
+		if (val == 3) {
+			puts("Setting registers VCFGEN0 and VCTL\n");
+			read_from_px_regs(1);
+			puts("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
+			set_px_go();
+		} else
+			goto my_usage;
+
+		while (1) ;	/* Not reached */
+
+	case 'l':
+		if (argv[2][1] == 'f') {
+			read_from_px_regs(0);
+			read_from_px_regs_altbank(0);
+			/* reset with frequency changed */
+			val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));
+
+			corepll = strfractoint(argv[4]);
+			val = val + set_px_corepll(corepll);
+			val = val + set_px_mpxpll(simple_strtoul(argv[5],
+								 NULL, 10));
+			if (val == 3) {
+				puts("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
+				set_altbank();
+				read_from_px_regs(1);
+				read_from_px_regs_altbank(1);
+				puts("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
+				set_px_go_with_watchdog();
+			} else
+				goto my_usage;
+
+			while (1) ;	/* Not reached */
+
+		} else if (argv[2][1] == 'd') {
+			/*
+			 * Reset from alternate bank without changing
+			 * frequencies but with watchdog timer enabled.
+			 */
+			read_from_px_regs(0);
+			read_from_px_regs_altbank(0);
+			puts("Setting registers VCFGEN1, VBOOT, and VCTL\n");
+			set_altbank();
+			read_from_px_regs_altbank(1);
+			puts("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
+			set_px_go_with_watchdog();
+			while (1) ;	/* Not reached */
+
+		} else {
+			/*
+			 * Reset from next bank without changing
+			 * frequency and without watchdog timer enabled.
+			 */
+			read_from_px_regs(0);
+			read_from_px_regs_altbank(0);
+			if (argc > 2)
+				goto my_usage;
+			puts("Setting registers VCFGNE1, VBOOT, and VCTL\n");
+			set_altbank();
+			read_from_px_regs_altbank(1);
+			puts("Resetting board to boot from the other bank....\n");
+			set_px_go();
+		}
+
+	default:
+		goto my_usage;
+	}
+
+my_usage:
+	puts("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
+	puts("       reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
+	puts("       reset altbank [wd]\n");
+	puts("For example:   reset cf 40 2.5 10\n");
+	puts("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
+}
+
+
+/*
+ * get_board_sys_clk
+ *      Reads the FPGA on board for CONFIG_SYS_CLK_FREQ
+ */
+
+unsigned long
+get_board_sys_clk(ulong dummy)
+{
+	u8 i, go_bit, rd_clks;
+	ulong val = 0;
+
+	go_bit = in8(PIXIS_BASE + PIXIS_VCTL);
+	go_bit &= 0x01;
+
+	rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0);
+	rd_clks &= 0x1C;
+
+	/*
+	 * Only if both go bit and the SCLK bit in VCFGEN0 are set
+	 * should we be using the AUX register. Remember, we also set the
+	 * GO bit to boot from the alternate bank on the on-board flash
+	 */
+
+	if (go_bit) {
+		if (rd_clks == 0x1c)
+			i = in8(PIXIS_BASE + PIXIS_AUX);
+		else
+			i = in8(PIXIS_BASE + PIXIS_SPD);
+	} else {
+		i = in8(PIXIS_BASE + PIXIS_SPD);
+	}
+
+	i &= 0x07;
+
+	switch (i) {
+	case 0:
+		val = 33000000;
+		break;
+	case 1:
+		val = 40000000;
+		break;
+	case 2:
+		val = 50000000;
+		break;
+	case 3:
+		val = 66000000;
+		break;
+	case 4:
+		val = 83000000;
+		break;
+	case 5:
+		val = 100000000;
+		break;
+	case 6:
+		val = 134000000;
+		break;
+	case 7:
+		val = 166000000;
+		break;
+	}
+
+	return val;
+}
diff --git a/board/mpc8641hpcn/pixis.c b/board/mpc8641hpcn/pixis.c
new file mode 100644
index 0000000..964a17c
--- /dev/null
+++ b/board/mpc8641hpcn/pixis.c
@@ -0,0 +1,321 @@
+/*
+ * Copyright 2006 Freescale Semiconductor
+ * Jeff Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/cache.h>
+#include <mpc86xx.h>
+
+#include "pixis.h"
+
+
+/*
+ * Per table 27, page 58 of MPC8641HPCN spec.
+ */
+int set_px_sysclk(ulong sysclk)
+{
+	u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux;
+
+	switch (sysclk) {
+	case 33:
+		sysclk_s = 0x04;
+		sysclk_r = 0x04;
+		sysclk_v = 0x07;
+		sysclk_aux = 0x00;
+		break;
+	case 40:
+		sysclk_s = 0x01;
+		sysclk_r = 0x1F;
+		sysclk_v = 0x20;
+		sysclk_aux = 0x01;
+		break;
+	case 50:
+		sysclk_s = 0x01;
+		sysclk_r = 0x1F;
+		sysclk_v = 0x2A;
+		sysclk_aux = 0x02;
+		break;
+	case 66:
+		sysclk_s = 0x01;
+		sysclk_r = 0x04;
+		sysclk_v = 0x04;
+		sysclk_aux = 0x03;
+		break;
+	case 83:
+		sysclk_s = 0x01;
+		sysclk_r = 0x1F;
+		sysclk_v = 0x4B;
+		sysclk_aux = 0x04;
+		break;
+	case 100:
+		sysclk_s = 0x01;
+		sysclk_r = 0x1F;
+		sysclk_v = 0x5C;
+		sysclk_aux = 0x05;
+		break;
+	case 134:
+		sysclk_s = 0x06;
+		sysclk_r = 0x1F;
+		sysclk_v = 0x3B;
+		sysclk_aux = 0x06;
+		break;
+	case 166:
+		sysclk_s = 0x06;
+		sysclk_r = 0x1F;
+		sysclk_v = 0x4B;
+		sysclk_aux = 0x07;
+		break;
+	default:
+		printf("Unsupported SYSCLK frequency.\n");
+		return 0;
+	}
+
+	vclkh = (sysclk_s << 5) | sysclk_r;
+	vclkl = sysclk_v;
+
+	out8(PIXIS_BASE + PIXIS_VCLKH, vclkh);
+	out8(PIXIS_BASE + PIXIS_VCLKL, vclkl);
+
+	out8(PIXIS_BASE + PIXIS_AUX, sysclk_aux);
+
+	return 1;
+}
+
+
+int set_px_mpxpll(ulong mpxpll)
+{
+	u8 tmp;
+	u8 val;
+
+	switch (mpxpll) {
+	case 2:
+	case 4:
+	case 6:
+	case 8:
+	case 10:
+	case 12:
+	case 14:
+	case 16:
+		val = (u8) mpxpll;
+		break;
+	default:
+		printf("Unsupported MPXPLL ratio.\n");
+		return 0;
+	}
+
+	tmp = in8(PIXIS_BASE + PIXIS_VSPEED1);
+	tmp = (tmp & 0xF0) | (val & 0x0F);
+	out8(PIXIS_BASE + PIXIS_VSPEED1, tmp);
+
+	return 1;
+}
+
+
+int set_px_corepll(ulong corepll)
+{
+	u8 tmp;
+	u8 val;
+
+	switch ((int)corepll) {
+	case 20:
+		val = 0x08;
+		break;
+	case 25:
+		val = 0x0C;
+		break;
+	case 30:
+		val = 0x10;
+		break;
+	case 35:
+		val = 0x1C;
+		break;
+	case 40:
+		val = 0x14;
+		break;
+	case 45:
+		val = 0x0E;
+		break;
+	default:
+		printf("Unsupported COREPLL ratio.\n");
+		return 0;
+	}
+
+	tmp = in8(PIXIS_BASE + PIXIS_VSPEED0);
+	tmp = (tmp & 0xE0) | (val & 0x1F);
+	out8(PIXIS_BASE + PIXIS_VSPEED0, tmp);
+
+	return 1;
+}
+
+
+void read_from_px_regs(int set)
+{
+	u8 mask = 0x1C;
+	u8 tmp = in8(PIXIS_BASE + PIXIS_VCFGEN0);
+
+	if (set)
+		tmp = tmp | mask;
+	else
+		tmp = tmp & ~mask;
+	out8(PIXIS_BASE + PIXIS_VCFGEN0, tmp);
+}
+
+
+void read_from_px_regs_altbank(int set)
+{
+	u8 mask = 0x04;
+	u8 tmp = in8(PIXIS_BASE + PIXIS_VCFGEN1);
+
+	if (set)
+		tmp = tmp | mask;
+	else
+		tmp = tmp & ~mask;
+	out8(PIXIS_BASE + PIXIS_VCFGEN1, tmp);
+}
+
+
+void set_altbank(void)
+{
+	u8 tmp;
+
+	tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
+	tmp ^= 0x40;
+
+	out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
+}
+
+
+void set_px_go(void)
+{
+	u8 tmp;
+
+	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
+	tmp = tmp & 0x1E;
+	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
+
+	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
+	tmp = tmp | 0x01;
+	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
+}
+
+
+void set_px_go_with_watchdog(void)
+{
+	u8 tmp;
+
+	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
+	tmp = tmp & 0x1E;
+	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
+
+	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
+	tmp = tmp | 0x09;
+	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
+}
+
+
+int disable_watchdog(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	u8 tmp;
+
+	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
+	tmp = tmp & 0x1E;
+	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
+
+	/* setting VCTL[WDEN] to 0 to disable watch dog */
+	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
+	tmp &= ~0x08;
+	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	   diswd, 1, 0, disable_watchdog,
+	   "diswd	- Disable watchdog timer \n",
+	   NULL);
+
+/*
+ * This function takes the non-integral cpu:mpx pll ratio
+ * and converts it to an integer that can be used to assign
+ * FPGA register values.
+ * input: strptr i.e. argv[2]
+ */
+
+ulong strfractoint(uchar *strptr)
+{
+	int i, j, retval;
+	int mulconst;
+	int intarr_len = 0, decarr_len = 0, no_dec = 0;
+	ulong intval = 0, decval = 0;
+	uchar intarr[3], decarr[3];
+
+	/* Assign the integer part to intarr[]
+	 * If there is no decimal point i.e.
+	 * if the ratio is an integral value
+	 * simply create the intarr.
+	 */
+	i = 0;
+	while (strptr[i] != 46) {
+		if (strptr[i] == 0) {
+			no_dec = 1;
+			break;
+		}
+		intarr[i] = strptr[i];
+		i++;
+	}
+
+	/* Assign length of integer part to intarr_len. */
+	intarr_len = i;
+	intarr[i] = '\0';
+
+	if (no_dec) {
+		/* Currently needed only for single digit corepll ratios */
+		mulconst = 10;
+		decval = 0;
+	} else {
+		j = 0;
+		i++;		/* Skipping the decimal point */
+		while ((strptr[i] > 47) && (strptr[i] < 58)) {
+			decarr[j] = strptr[i];
+			i++;
+			j++;
+		}
+
+		decarr_len = j;
+		decarr[j] = '\0';
+
+		mulconst = 1;
+		for (i = 0; i < decarr_len; i++)
+			mulconst *= 10;
+		decval = simple_strtoul(decarr, NULL, 10);
+	}
+
+	intval = simple_strtoul(intarr, NULL, 10);
+	intval = intval * mulconst;
+
+	retval = intval + decval;
+
+	return retval;
+}
diff --git a/board/mpc8641hpcn/pixis.h b/board/mpc8641hpcn/pixis.h
new file mode 100644
index 0000000..cd9a45d
--- /dev/null
+++ b/board/mpc8641hpcn/pixis.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2006 Freescale Semiconductor
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+extern int set_px_sysclk(ulong sysclk);
+extern int set_px_mpxpll(ulong mpxpll);
+extern int set_px_corepll(ulong corepll);
+extern void read_from_px_regs(int set);
+extern void read_from_px_regs_altbank(int set);
+extern void set_altbank(void);
+extern void set_px_go(void);
+extern void set_px_go_with_watchdog(void);
+extern int disable_watchdog(cmd_tbl_t *cmdtp,
+			    int flag, int argc, char *argv[]);
+extern ulong strfractoint(uchar *strptr);
diff --git a/board/mpc8641hpcn/sys_eeprom.c b/board/mpc8641hpcn/sys_eeprom.c
new file mode 100644
index 0000000..74e2a3d
--- /dev/null
+++ b/board/mpc8641hpcn/sys_eeprom.c
@@ -0,0 +1,256 @@
+/*
+ * Copyright 2006 Freescale Semiconductor
+ * York Sun (yorksun@freescale.com)
+ * Haiying Wang (haiying.wang@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <linux/ctype.h>
+
+#ifdef CFG_ID_EEPROM
+typedef struct {
+	unsigned char id[4];		/* 0x0000 - 0x0003 */
+	unsigned char sn[12];		/* 0x0004 - 0x000F */
+	unsigned char errata[5];	/* 0x0010 - 0x0014 */
+	unsigned char date[7];		/* 0x0015 - 0x001a */
+	unsigned char res_1[37];	/* 0x001b - 0x003f */
+	unsigned char tab_size;		/* 0x0040 */
+	unsigned char tab_flag;		/* 0x0041 */
+	unsigned char mac[8][6];	/* 0x0042 - 0x0071 */
+	unsigned char res_2[126];	/* 0x0072 - 0x00ef */
+	unsigned int crc;		/* 0x00f0 - 0x00f3 crc32 checksum */
+} EEPROM_data;
+
+static EEPROM_data mac_data;
+
+int mac_show(void)
+{
+	int i;
+	unsigned char ethaddr[8][18];
+
+	printf("ID %c%c%c%c\n",
+	       mac_data.id[0],
+	       mac_data.id[1],
+	       mac_data.id[2],
+	       mac_data.id[3]);
+	printf("Errata %c%c%c%c%c\n",
+	       mac_data.errata[0],
+	       mac_data.errata[1],
+	       mac_data.errata[2],
+	       mac_data.errata[3],
+	       mac_data.errata[4]);
+	printf("Date %c%c%c%c%c%c%c\n",
+	       mac_data.date[0],
+	       mac_data.date[1],
+	       mac_data.date[2],
+	       mac_data.date[3],
+	       mac_data.date[4],
+	       mac_data.date[5],
+	       mac_data.date[6]);
+	for (i = 0; i < 8; i++) {
+		sprintf(ethaddr[i],
+			"%02x:%02x:%02x:%02x:%02x:%02x",
+			mac_data.mac[i][0],
+			mac_data.mac[i][1],
+			mac_data.mac[i][2],
+			mac_data.mac[i][3],
+			mac_data.mac[i][4],
+			mac_data.mac[i][5]);
+		printf("MAC %d %s\n", i, ethaddr[i]);
+	}
+
+	setenv("ethaddr", ethaddr[0]);
+	setenv("eth1addr", ethaddr[1]);
+	setenv("eth2addr", ethaddr[2]);
+	setenv("eth3addr", ethaddr[3]);
+
+	return 0;
+}
+
+int mac_read(void)
+{
+	int ret, length;
+	unsigned int crc = 0;
+	unsigned char dev = ID_EEPROM_ADDR, *data;
+
+	length = sizeof(EEPROM_data);
+	ret = i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length);
+	if (ret) {
+		printf("Read failed.\n");
+		return -1;
+	}
+
+	data = (unsigned char *)(&mac_data);
+	printf("Check CRC on reading ...");
+	crc = crc32(crc, data, length - 4);
+	if (crc != mac_data.crc) {
+		printf("CRC checksum is invalid, in EEPROM CRC is %x, calculated CRC is %x\n",
+		     mac_data.crc, crc);
+		return -1;
+	} else {
+		printf("CRC OK\n");
+		mac_show();
+	}
+	return 0;
+}
+
+int mac_prog(void)
+{
+	int ret, i, length;
+	unsigned int crc = 0;
+	unsigned char dev = ID_EEPROM_ADDR, *ptr;
+	unsigned char *eeprom_data = (unsigned char *)(&mac_data);
+
+	for (i = 0; i < sizeof(mac_data.res_1); i++)
+		mac_data.res_1[i] = 0;
+	for (i = 0; i < sizeof(mac_data.res_2); i++)
+		mac_data.res_2[i] = 0;
+	length = sizeof(EEPROM_data);
+	crc = crc32(crc, eeprom_data, length - 4);
+	mac_data.crc = crc;
+	for (i = 0, ptr = eeprom_data; i < length; i += 8, ptr += 8) {
+		ret =
+		    i2c_write(dev, i, 1, ptr,
+			      (length - i) < 8 ? (length - i) : 8);
+		udelay(5000);	/* 5ms write cycle timing */
+		if (ret)
+			break;
+	}
+	if (ret) {
+		printf("Programming failed.\n");
+		return -1;
+	} else {
+		printf("Programming %d bytes. Reading back ...\n", length);
+		mac_read();
+	}
+	return 0;
+}
+
+int do_mac(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	int i;
+	char cmd = 's';
+	unsigned long long mac_val;
+
+	if (i2c_probe(ID_EEPROM_ADDR) != 0)
+		return -1;
+
+	if (argc > 1) {
+		cmd = argv[1][0];
+		switch (cmd) {
+		case 'r':	/* display */
+			mac_read();
+			break;
+		case 's':	/* save */
+			mac_prog();
+			break;
+		case 'i':	/* id */
+			for (i = 0; i < 4; i++) {
+				mac_data.id[i] = argv[2][i];
+			}
+			break;
+		case 'n':	/* serial number */
+			for (i = 0; i < 12; i++) {
+				mac_data.sn[i] = argv[2][i];
+			}
+			break;
+		case 'e':	/* errata */
+			for (i = 0; i < 5; i++) {
+				mac_data.errata[i] = argv[2][i];
+			}
+			break;
+		case 'd':	/* date */
+			for (i = 0; i < 7; i++) {
+				mac_data.date[i] = argv[2][i];
+			}
+			break;
+		case 'p':	/* number of ports */
+			mac_data.tab_size =
+			    (unsigned char)simple_strtoul(argv[2], NULL, 16);
+			break;
+		case '0':	/* mac 0 */
+		case '1':	/* mac 1 */
+		case '2':	/* mac 2 */
+		case '3':	/* mac 3 */
+		case '4':	/* mac 4 */
+		case '5':	/* mac 5 */
+		case '6':	/* mac 6 */
+		case '7':	/* mac 7 */
+			mac_val = simple_strtoull(argv[2], NULL, 16);
+			for (i = 0; i < 6; i++) {
+				mac_data.mac[cmd - '0'][i] =
+				    *((unsigned char *)
+				      (((unsigned int)(&mac_val)) + i + 2));
+			}
+			break;
+		case 'h':	/* help */
+		default:
+			printf("Usage:\n%s\n", cmdtp->usage);
+			break;
+		}
+	} else {
+		mac_show();
+	}
+	return 0;
+}
+
+int mac_read_from_eeprom(void)
+{
+	int length, i;
+	unsigned char dev = ID_EEPROM_ADDR;
+	unsigned char *data;
+	unsigned char ethaddr[4][18];
+	unsigned char enetvar[32];
+	unsigned int crc = 0;
+
+	length = sizeof(EEPROM_data);
+	if (i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length)) {
+		printf("Read failed.\n");
+		return -1;
+	}
+
+	data = (unsigned char *)(&mac_data);
+	crc = crc32(crc, data, length - 4);
+	if (crc != mac_data.crc) {
+		return -1;
+	} else {
+		for (i = 0; i < 4; i++) {
+			if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) {
+				sprintf(ethaddr[i],
+					"%02x:%02x:%02x:%02x:%02x:%02x",
+					mac_data.mac[i][0],
+					mac_data.mac[i][1],
+					mac_data.mac[i][2],
+					mac_data.mac[i][3],
+					mac_data.mac[i][4],
+					mac_data.mac[i][5]);
+				sprintf(enetvar,
+					i ? "eth%daddr" : "ethaddr",
+					i);
+				setenv(enetvar, ethaddr[i]);
+			}
+		}
+	}
+	return 0;
+}
+#endif /* CFG_ID_EEPROM */
diff --git a/board/mpc8641hpcn/u-boot.lds b/board/mpc8641hpcn/u-boot.lds
new file mode 100644
index 0000000..b34de8e
--- /dev/null
+++ b/board/mpc8641hpcn/u-boot.lds
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2004, Freescale, Inc.
+ * (C) Copyright 2002,2003, Motorola,Inc.
+ * Jeff Brown
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFF00100 :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFF70000 :
+  {
+    cpu/mpc86xx/start.o	(.bootpg)
+    board/mpc8641hpcn/init.o (.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + 1024;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc86xx/start.o	(.text)
+    board/mpc8641hpcn/init.o (.text)
+    cpu/mpc86xx/traps.o (.text)
+    cpu/mpc86xx/interrupts.o (.text)
+    cpu/mpc86xx/cpu_init.o (.text)
+    cpu/mpc86xx/cpu.o (.text)
+    cpu/mpc86xx/speed.o (.text)
+    cpu/mpc86xx/pci.o (.text)
+    common/dlmalloc.o (.text)
+    lib_generic/crc32.o (.text)
+    lib_ppc/extable.o (.text)
+    lib_generic/zlib.o (.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+   }
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c
index 94c492f..6ead1d0 100644
--- a/board/pm854/pm854.c
+++ b/board/pm854/pm854.c
@@ -289,8 +289,6 @@
 pci_init_board(void)
 {
 #ifdef CONFIG_PCI
-	extern void pci_mpc85xx_init(struct pci_controller *hose);
-
 	pci_mpc85xx_init(&hose);
 #endif /* CONFIG_PCI */
 }
diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c
index 5044708..a100754 100644
--- a/board/pm856/pm856.c
+++ b/board/pm856/pm856.c
@@ -442,8 +442,6 @@
 pci_init_board(void)
 {
 #ifdef CONFIG_PCI
-	extern void pci_mpc85xx_init(struct pci_controller *hose);
-
 	pci_mpc85xx_init(&hose);
 #endif /* CONFIG_PCI */
 }
diff --git a/board/sbc8560/u-boot.lds b/board/sbc8560/u-boot.lds
index 48e19fe..048ac26 100644
--- a/board/sbc8560/u-boot.lds
+++ b/board/sbc8560/u-boot.lds
@@ -77,7 +77,6 @@
     cpu/mpc85xx/cpu_init.o (.text)
     cpu/mpc85xx/cpu.o (.text)
     cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/i2c.o (.text)
     cpu/mpc85xx/spd_sdram.o (.text)
     common/dlmalloc.o (.text)
     lib_generic/crc32.o (.text)
diff --git a/board/stxgp3/stxgp3.c b/board/stxgp3/stxgp3.c
index 2b3949c..a58c043 100644
--- a/board/stxgp3/stxgp3.c
+++ b/board/stxgp3/stxgp3.c
@@ -375,8 +375,6 @@
 pci_init_board(void)
 {
 #ifdef CONFIG_PCI
-	extern void pci_mpc85xx_init(struct pci_controller *hose);
-
 	pci_mpc85xx_init(&hose);
 #endif /* CONFIG_PCI */
 }
diff --git a/board/stxgp3/u-boot.lds b/board/stxgp3/u-boot.lds
index 3bc6150..1bbf20a 100644
--- a/board/stxgp3/u-boot.lds
+++ b/board/stxgp3/u-boot.lds
@@ -79,7 +79,6 @@
     cpu/mpc85xx/cpu_init.o (.text)
     cpu/mpc85xx/cpu.o (.text)
     cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/i2c.o (.text)
     cpu/mpc85xx/spd_sdram.o (.text)
     common/dlmalloc.o (.text)
     lib_generic/crc32.o (.text)
diff --git a/board/stxxtc/Makefile b/board/stxxtc/Makefile
index b575e23..424ab1c 100644
--- a/board/stxxtc/Makefile
+++ b/board/stxxtc/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o oftree.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
@@ -34,14 +34,6 @@
 $(LIB):	$(obj).depend $(OBJS)
 	$(AR) $(ARFLAGS) $@ $(OBJS)
 
-$(obj)%.dtb: $(src)%.dts
-	dtc -f -V 0x10 -I dts -O dtb $< >$@
-
-$(obj)%.c: $(obj)%.dtb
-	xxd -i $< \
-	   | sed -e "s/^unsigned char/const unsigned char/g" \
-	   | sed -e "s/^unsigned int/const unsigned int/g" > $@
-
 #########################################################################
 
 # defines $(obj).depend target
diff --git a/board/stxxtc/oftree.dts b/board/stxxtc/oftree.dts
deleted file mode 100644
index e3f3017..0000000
--- a/board/stxxtc/oftree.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-/ {
-	model = "STXXTC V1";
-	compatible = "STXXTC";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		linux,phandle = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		PowerPC,MPC870@0 {
-			linux,phandle = <3>;
-			name = "PowerPC,MPC870";
-			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <0>;		/* place-holder for runtime fillup */
-			timebase-frequency = <0>;	/* dido */
-			linux,boot-cpu;
-			i-cache-size = <2000>;
-			d-cache-size = <2000>;
-			32-bit;
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <00000000 00000000 00000000 20000000>;
-	};
-
-	/* copy of the bd_t information (place-holders) */
-	bd_t {
-		memstart	= <0>;
-		memsize		= <0>;
-		flashstart	= <0>;
-		flashsize	= <0>;
-		flashoffset	= <0>;
-		sramstart	= <0>;
-		sramsize	= <0>;
-
-		immr_base	= <0>;
-
-		bootflags	= <0>;
-		ip_addr		= <0>;
-		enetaddr	= [ 00 00 00 00 00 00 ];
-		ethspeed	= <0>;
-		intfreq		= <0>;
-		busfreq		= <0>;
-
-		baudrate	= <0>;
-	};
-
-};
diff --git a/board/tqm85xx/tqm85xx.c b/board/tqm85xx/tqm85xx.c
index b4ef5af..256c076 100644
--- a/board/tqm85xx/tqm85xx.c
+++ b/board/tqm85xx/tqm85xx.c
@@ -408,8 +408,6 @@
 void pci_init_board (void)
 {
 #ifdef CONFIG_PCI
-	extern void pci_mpc85xx_init (struct pci_controller *hose);
-
 	pci_mpc85xx_init (&hose);
 #endif /* CONFIG_PCI */
 }
diff --git a/board/v38b/Makefile b/board/v38b/Makefile
new file mode 100644
index 0000000..304deaa
--- /dev/null
+++ b/board/v38b/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o ethaddr.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/v38b/config.mk b/board/v38b/config.mk
new file mode 100644
index 0000000..75577fc
--- /dev/null
+++ b/board/v38b/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MarelV38B board
+#
+
+sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+
+TEXT_BASE = 0xFF000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/v38b/ethaddr.c b/board/v38b/ethaddr.c
new file mode 100644
index 0000000..aaa629e
--- /dev/null
+++ b/board/v38b/ethaddr.c
@@ -0,0 +1,254 @@
+/*
+ *
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+
+#define GPIO_ENABLE	(MPC5XXX_WU_GPIO)
+
+/* Open Drain Emulation Register */
+#define GPIO_ODR	(MPC5XXX_WU_GPIO + 0x04)
+
+/* Data Direction Register */
+#define GPIO_DDR	(MPC5XXX_WU_GPIO + 0x08)
+
+/* Data Value Out Register */
+#define GPIO_DVOR	(MPC5XXX_WU_GPIO + 0x0C)
+
+/* Interrupt Enable Register */
+#define GPIO_IER	(MPC5XXX_WU_GPIO + 0x10)
+
+/* Individual Interrupt Enable Register */
+#define GPIO_IIER	(MPC5XXX_WU_GPIO + 0x14)
+
+/* Interrupt Type Register */
+#define GPIO_ITR	(MPC5XXX_WU_GPIO + 0x18)
+
+/* Master Enable Register */
+#define GPIO_MER	(MPC5XXX_WU_GPIO + 0x1C)
+
+/* Data Input Value Register */
+#define GPIO_DIVR	(MPC5XXX_WU_GPIO + 0x20)
+
+/* Status Register */
+#define GPIO_SR		(MPC5XXX_WU_GPIO + 0x24)
+
+#define PSC6_0		0x10000000
+#define WKUP_7		0x80000000
+
+/* For NS4 A/B board define WKUP_7, for V38B board PSC_6 */
+#define GPIO_PIN	PSC6_0
+
+#define NO_ERROR	0
+#define ERR_NO_NUMBER	1
+#define ERR_BAD_NUMBER	2
+
+typedef volatile unsigned long GPIO_REG;
+typedef GPIO_REG *GPIO_REG_PTR;
+
+static int is_high(void);
+static int check_device(void);
+static void io_out(int value);
+static void io_input(void);
+static void io_output(void);
+static void init_gpio(void);
+static void read_byte(unsigned char *data);
+static void write_byte(unsigned char command);
+
+void read_2501_memory(unsigned char *psernum, unsigned char *perr);
+void board_get_enetaddr(uchar *enetaddr);
+
+static int is_high()
+{
+	return (* ((vu_long *) GPIO_DIVR) & GPIO_PIN);
+}
+
+static void io_out(int value)
+{
+	if (value)
+		*((vu_long *) GPIO_DVOR) |= GPIO_PIN;
+	else
+		*((vu_long *) GPIO_DVOR) &= ~GPIO_PIN;
+}
+
+static void io_input()
+{
+	*((vu_long *) GPIO_DDR) &= ~GPIO_PIN;
+	udelay(3);	/* allow input to settle */
+}
+
+static void io_output()
+{
+	*((vu_long *) GPIO_DDR) |= GPIO_PIN;
+}
+
+static void init_gpio()
+{
+	*((vu_long *) GPIO_ENABLE) |= GPIO_PIN;	/* Enable appropriate pin */
+}
+
+void read_2501_memory(unsigned char *psernum, unsigned char *perr)
+{
+#define NBYTES 28
+	unsigned char crcval, i;
+	unsigned char buf[NBYTES];
+
+	*perr = 0;
+	crcval = 0;
+
+	for (i=0; i<NBYTES; i++)
+
+
+	if (!check_device())
+		*perr = ERR_NO_NUMBER;
+	else {
+		*perr = NO_ERROR;
+		write_byte(0xCC);		/* skip ROM (0xCC) */
+		write_byte(0xF0);		/* Read memory command 0xF0 */
+		write_byte(0x00);		/* Address TA1=0, TA2=0 */
+		write_byte(0x00);
+		read_byte(&crcval);		/* Read CRC of address and command */
+
+		for (i=0; i<NBYTES; i++)
+			read_byte( &buf[i] );
+	}
+	if (strncmp((const char*) &buf[11], "MAREL IEEE 802.3", 16)) {
+		*perr = ERR_BAD_NUMBER;
+		psernum[0] = 0x00;
+		psernum[1] = 0xE0;
+		psernum[2] = 0xEE;
+		psernum[3] = 0xFF;
+		psernum[4] = 0xFF;
+		psernum[5] = 0xFF;
+	}
+	else {
+		psernum[0] = 0x00;
+		psernum[1] = 0xE0;
+		psernum[2] = 0xEE;
+		psernum[3] = buf[7];
+		psernum[4] = buf[6];
+		psernum[5] = buf[5];
+	}
+}
+
+static int check_device()
+{
+	int found;
+
+	io_output();
+	io_out(0);
+	udelay(500);  /* must be at least 480 us low pulse */
+
+	io_input();
+	udelay(60);
+
+	found = (is_high() == 0) ? 1 : 0;
+	udelay(500);  /* must be at least 480 us low pulse */
+
+	return found;
+}
+
+static void write_byte(unsigned char command)
+{
+	char i;
+
+	for (i=0; i<8; i++) {
+		/* 1 us to 15 us low pulse starts bit slot */
+		/* Start with high pulse for 3 us */
+		io_input();
+
+		udelay(3);
+
+		io_out(0);
+		io_output();
+
+		udelay(3);
+
+		if (command & 0x01) {
+			/* 60 us high for 1-bit */
+			io_input();
+			udelay(60);
+		}
+		else {
+			/* 60 us low for 0-bit */
+			udelay(60);
+		}
+		/*  Leave pin as input */
+		io_input();
+
+		command = command >> 1;
+	}
+}
+
+static void read_byte(unsigned char  *data)
+{
+	unsigned char i, rdat = 0;
+
+	for (i=0; i<8; i++) {
+		/* read one bit from one-wire device */
+
+		/* 1 - 15 us low starts bit slot */
+		io_out(0);
+		io_output();
+		udelay(0);
+
+		/* allow line to be pulled high */
+		io_input();
+
+		/* delay 10 us */
+		udelay(10);
+
+		/* now sample input status */
+		if (is_high())
+			rdat = (rdat >> 1) | 0x80;
+		else
+			rdat = rdat >> 1;
+
+		udelay(60);	/* at least 60 us */
+	}
+	/* copy the return value */
+	*data = rdat;
+}
+
+void board_get_enetaddr(uchar *enetaddr)
+{
+	unsigned char sn[6], err=NO_ERROR;
+
+	init_gpio();
+
+	read_2501_memory(sn, &err);
+
+	if (err == NO_ERROR) {
+		sprintf(enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
+				sn[0], sn[1], sn[2], sn[3], sn[4], sn[5]);
+		printf("MAC address: %s\n", enetaddr);
+		setenv("ethaddr", enetaddr);
+	}
+	else {
+		sprintf(enetaddr, "00:01:02:03:04:05");
+		printf("Error reading MAC address.\n");
+		printf("Setting default to %s\n", enetaddr);
+		setenv("ethaddr", enetaddr);
+	}
+}
diff --git a/board/v38b/u-boot.lds b/board/v38b/u-boot.lds
new file mode 100644
index 0000000..6ec5256
--- /dev/null
+++ b/board/v38b/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2003-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc5xxx/start.o	(.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c
new file mode 100644
index 0000000..99fe7db
--- /dev/null
+++ b/board/v38b/v38b.c
@@ -0,0 +1,252 @@
+/*
+ * (C) Copyright 2003-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <asm/processor.h>
+
+#ifndef CFG_RAMBOOT
+static void sdram_start(int hi_addr)
+{
+	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+	/* unlock mode register */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+	/* precharge all banks */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+#if SDRAM_DDR
+	/* set mode register: extended mode */
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+	__asm__ volatile ("sync");
+
+	/* set mode register: reset DLL */
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+	__asm__ volatile ("sync");
+#endif /* SDRAM_DDR */
+
+	/* precharge all banks */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+	/* auto refresh */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+	/* set mode register */
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+	__asm__ volatile ("sync");
+
+	/* normal operation */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+	__asm__ volatile ("sync");
+}
+#endif /* !CFG_RAMBOOT */
+
+
+long int initdram(int board_type)
+{
+	ulong dramsize = 0;
+	ulong dramsize2 = 0;
+	uint svr, pvr;
+
+#ifndef CFG_RAMBOOT
+	ulong test1, test2;
+
+	/* setup SDRAM chip selects */
+	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
+	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
+	__asm__ volatile ("sync");
+
+	/* setup config registers */
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+	__asm__ volatile ("sync");
+
+#if SDRAM_DDR
+	/* set tap delay */
+	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+	__asm__ volatile ("sync");
+#endif /* SDRAM_DDR */
+
+	/* find RAM size using SDRAM CS0 only */
+	sdram_start(0);
+	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	sdram_start(1);
+	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize = test1;
+	} else
+		dramsize = test2;
+
+	/* memory smaller than 1MB is impossible */
+	if (dramsize < (1 << 20))
+		dramsize = 0;
+
+	/* set SDRAM CS0 size according to the amount of RAM found */
+	if (dramsize > 0)
+		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
+	else
+		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+
+	/* let SDRAM CS1 start right after CS0 */
+	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+
+	/* find RAM size using SDRAM CS1 only */
+	if (!dramsize)
+		sdram_start(0);
+	test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	if (!dramsize) {
+		sdram_start(1);
+		test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	}
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize2 = test1;
+	} else
+		dramsize2 = test2;
+
+	/* memory smaller than 1MB is impossible */
+	if (dramsize2 < (1 << 20))
+		dramsize2 = 0;
+
+	/* set SDRAM CS1 size according to the amount of RAM found */
+	if (dramsize2 > 0)
+		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
+			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
+	else
+		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+
+#else /* CFG_RAMBOOT */
+
+	/* retrieve size of memory connected to SDRAM CS0 */
+	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+	if (dramsize >= 0x13)
+		dramsize = (1 << (dramsize - 0x13)) << 20;
+	else
+		dramsize = 0;
+
+	/* retrieve size of memory connected to SDRAM CS1 */
+	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+	if (dramsize2 >= 0x13)
+		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+	else
+		dramsize2 = 0;
+
+#endif /* CFG_RAMBOOT */
+
+	/*
+	 * On MPC5200B we need to set the special configuration delay in the
+	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+	 *
+	 * "The SDelay should be written to a value of 0x00000004. It is
+	 * required to account for changes caused by normal wafer processing
+	 * parameters."
+	 */
+	svr = get_svr();
+	pvr = get_pvr();
+	if ((SVR_MJREV(svr) >= 2) &&
+		(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
+
+		*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+		__asm__ volatile ("sync");
+	}
+
+	return dramsize + dramsize2;
+}
+
+
+int checkboard (void)
+{
+	puts("Board: MarelV38B\n");
+	return 0;
+}
+
+
+int board_early_init_r(void)
+{
+	/*
+	 * Now, when we are in RAM, enable flash write access for detection process.
+	 * Note that CS_BOOT cannot be cleared when executing in flash.
+	 */
+	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+	return 0;
+}
+
+
+#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+
+#define GPIO_PSC1_4	0x01000000UL
+
+void init_ide_reset(void)
+{
+	debug("init_ide_reset\n");
+
+	/* Configure PSC1_4 as GPIO output for ATA reset */
+	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
+	/* Deassert reset */
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC1_4;
+}
+
+
+void ide_set_reset(int idereset)
+{
+	debug("ide_reset(%d)\n", idereset);
+
+	if (idereset) {
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		/* Make a delay. MPC5200 spec says 25 usec min */
+		udelay(500000);
+	} else
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+}
+#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+
+
+void led_d4_on(void)
+{
+	/* TIMER7 as GPIO output low */
+	*(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x24;
+}
+
+
+void led_d4_off(void)
+{
+	/* TIMER7 as GPIO output high */
+	*(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x34;
+}
+
+
+void hw_watchdog_reset(void)
+{
+/* TODO fill this in */
+}
diff --git a/common/Makefile b/common/Makefile
index 56092b9..07ddc95 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -51,7 +51,7 @@
 	  memsize.o miiphybb.o miiphyutil.o \
 	  s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o spartan3.o \
 	  usb.o usb_kbd.o usb_storage.o \
-	  virtex2.o xilinx.o crc16.o xyzModem.o
+	  virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o
 
 SRCS	:= $(AOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS))
diff --git a/common/cmd_boot.c b/common/cmd_boot.c
index e68f16f..182e2ab 100644
--- a/common/cmd_boot.c
+++ b/common/cmd_boot.c
@@ -83,7 +83,7 @@
 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 
 U_BOOT_CMD(
-	reset, 1, 0,	do_reset,
+	reset, CFG_MAXARGS, 1,	do_reset,
 	"reset   - Perform RESET of the CPU\n",
 	NULL
 );
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 2168e67..e8895c6 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -467,6 +467,13 @@
  	"[addr [arg ...]]\n    - boot application image stored in memory\n"
  	"\tpassing arguments 'arg ...'; when booting a Linux kernel,\n"
  	"\t'arg' can be the address of an initrd image\n"
+#ifdef CONFIG_OF_FLAT_TREE
+	"\tWhen booting a Linux kernel which requires a flat device-tree\n"
+	"\ta third argument is required which is the address of the of the\n"
+	"\tdevice-tree blob. To boot that kernel without an initrd image,\n"
+	"\tuse a '-' for the second argument. If you do not pass a third\n"
+	"\ta bd_info struct will be passed instead\n"
+#endif
 );
 
 #ifdef CONFIG_SILENT_CONSOLE
@@ -502,13 +509,8 @@
 }
 #endif /* CONFIG_SILENT_CONSOLE */
 
-#ifdef CONFIG_OF_FLAT_TREE
-extern const unsigned char oftree_dtb[];
-extern const unsigned int oftree_dtb_len;
-#endif
-
 #ifdef CONFIG_PPC
-static void
+static void  __attribute__((noinline))
 do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
 		int	argc, char *argv[],
 		ulong	addr,
@@ -528,7 +530,7 @@
 	void	(*kernel)(bd_t *, ulong, ulong, ulong, ulong);
 	image_header_t *hdr = &header;
 #ifdef CONFIG_OF_FLAT_TREE
-	char	*of_flat_tree;
+	char	*of_flat_tree = NULL;
 #endif
 
 	if ((s = getenv ("initrd_high")) != NULL) {
@@ -618,7 +620,17 @@
 	/*
 	 * Check if there is an initrd image
 	 */
+
+#ifdef CONFIG_OF_FLAT_TREE
+	/* Look for a '-' which indicates to ignore the ramdisk argument */
+	if (argc >= 3 && strcmp(argv[2], "-") ==  0) {
+			debug ("Skipping initrd\n");
+			len = data = 0;
+		}
+	else
+#endif
 	if (argc >= 3) {
+		debug ("Not skipping initrd\n");
 		SHOW_BOOT_PROGRESS (9);
 
 		addr = simple_strtoul(argv[2], NULL, 16);
@@ -726,6 +738,77 @@
 		len = data = 0;
 	}
 
+#ifdef CONFIG_OF_FLAT_TREE
+	if(argc > 3) {
+		of_flat_tree = (char *) simple_strtoul(argv[3], NULL, 16);
+		hdr = (image_header_t *)of_flat_tree;
+
+		if  (*(ulong *)of_flat_tree == OF_DT_HEADER) {
+#ifndef CFG_NO_FLASH
+			if (addr2info((ulong)of_flat_tree) != NULL) {
+				printf ("Cannot modify flat device tree stored in flash\n" \
+					"Copy to memory before using the bootm command\n");
+				return;
+			}
+#endif
+		} else if (ntohl(hdr->ih_magic) == IH_MAGIC) {
+			printf("## Flat Device Tree Image at %08lX\n", hdr);
+			print_image_hdr(hdr);
+
+			if ((ntohl(hdr->ih_load) <  ((unsigned long)hdr + ntohl(hdr->ih_size) + sizeof(hdr))) &&
+			   ((ntohl(hdr->ih_load) + ntohl(hdr->ih_size)) > (unsigned long)hdr)) {
+				printf ("ERROR: Load address overwrites Flat Device Tree uImage\n");
+				return;
+			}
+
+			printf("   Verifying Checksum ... ");
+			memmove (&header, (char *)hdr, sizeof(image_header_t));
+			checksum = ntohl(header.ih_hcrc);
+			header.ih_hcrc = 0;
+
+			if(checksum != crc32(0, (uchar *)&header, sizeof(image_header_t))) {
+				printf("ERROR: Flat Device Tree header checksum is invalid\n");
+				return;
+			}
+
+			checksum = ntohl(hdr->ih_dcrc);
+			addr = (ulong)((uchar *)(hdr) + sizeof(image_header_t));
+			len = ntohl(hdr->ih_size);
+
+			if(checksum != crc32(0, (uchar *)addr, len)) {
+				printf("ERROR: Flat Device Tree checksum is invalid\n");
+				return;
+			}
+			printf("OK\n");
+
+			if (ntohl(hdr->ih_type) != IH_TYPE_FLATDT) {
+				printf ("ERROR: uImage not Flat Device Tree type\n");
+				return;
+			}
+			if (ntohl(hdr->ih_comp) != IH_COMP_NONE) {
+				printf("ERROR: uImage is not uncompressed\n");
+				return;
+			}
+			if (*((ulong *)(of_flat_tree + sizeof(image_header_t))) != OF_DT_HEADER) {
+				printf ("ERROR: uImage data is not a flat device tree\n");
+				return;
+			}
+
+			memmove((void *)ntohl(hdr->ih_load),
+		       		(void *)(of_flat_tree + sizeof(image_header_t)),
+				ntohl(hdr->ih_size));
+			of_flat_tree = (char *)ntohl(hdr->ih_load);
+		} else {
+			printf ("Did not find a flat flat device tree at address %08lX\n", of_flat_tree);
+			return;
+		}
+		printf ("   Booting using flat device tree at 0x%x\n",
+				of_flat_tree);
+	} else if(getenv("disable_of") == NULL) {
+		printf ("ERROR: bootm needs flat device tree as third argument\n");
+		return;
+	}
+#endif
 	if (!data) {
 		debug ("No initrd\n");
 	}
@@ -795,15 +878,6 @@
 		initrd_end = 0;
 	}
 
-#ifdef CONFIG_OF_FLAT_TREE
-	if (initrd_start == 0)
-		of_flat_tree = (char *)(((ulong)kbd - OF_FLAT_TREE_MAX_SIZE -
-					sizeof(bd_t)) & ~0xF);
-	else
-		of_flat_tree = (char *)((initrd_start - OF_FLAT_TREE_MAX_SIZE -
-					sizeof(bd_t)) & ~0xF);
-#endif
-
 	debug ("## Transferring control to Linux (at address %08lx) ...\n",
 		(ulong)kernel);
 
@@ -826,7 +900,7 @@
 	(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
 
 #else
-	ft_setup(of_flat_tree, OF_FLAT_TREE_MAX_SIZE, kbd, initrd_start, initrd_end);
+	ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
 	/* ft_dump_blob(of_flat_tree); */
 
 #if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
@@ -843,9 +917,12 @@
 	if (getenv("disable_of") != NULL)
 		(*kernel) ((bd_t *)of_flat_tree, initrd_start, initrd_end,
 			cmd_start, cmd_end);
-	else
+	else {
+		ft_setup(of_flat_tree, kbd, initrd_start, initrd_end);
+		/* ft_dump_blob(of_flat_tree); */
 		(*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0);
-
+	}
+		
 #endif
 }
 #endif /* CONFIG_PPC */
@@ -1263,6 +1340,7 @@
 	case IH_TYPE_MULTI:	type = "Multi-File Image";	break;
 	case IH_TYPE_FIRMWARE:	type = "Firmware";		break;
 	case IH_TYPE_SCRIPT:	type = "Script";		break;
+	case IH_TYPE_FLATDT:	type = "Flat Device Tree";	break;
 	default:		type = "Unknown Image";		break;
 	}
 
diff --git a/common/cmd_mac.c b/common/cmd_mac.c
new file mode 100644
index 0000000..0add432
--- /dev/null
+++ b/common/cmd_mac.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2006 Freescale Semiconductor
+ * York Sun (yorksun@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+
+#ifdef CFG_ID_EEPROM
+
+extern int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+U_BOOT_CMD(
+	mac, 3, 1,  do_mac,
+	"mac     - display and program the system ID and MAC addresses in EEPROM\n",
+	"[read|save|id|num|errata|date|ports|0|1|2|3|4|5|6|7]\n"
+	"read\n"
+	"    - show content of mac\n"
+	"mac save\n"
+	"    - save to the EEPROM\n"
+	"mac id\n"
+	"    - program system id\n"
+	"mac num\n"
+	"    - program system serial number\n"
+	"mac errata\n"
+	"    - program errata data\n"
+	"mac date\n"
+	"    - program data date\n"
+	"mac ports\n"
+	"    - program the number of ports\n"
+	"mac 0\n"
+	"    - program the MAC address for port 0\n"
+	"mac 1\n"
+	"    - program the MAC address for port 1\n"
+	"mac 2\n"
+	"    - program the MAC address for port 2\n"
+	"mac 3\n"
+	"    - program the MAC address for port 3\n"
+	"mac 4\n"
+	"    - program the MAC address for port 4\n"
+	"mac 5\n"
+	"    - program the MAC address for port 5\n"
+	"mac 6\n"
+	"    - program the MAC address for port 6\n"
+	"mac 7\n"
+	"    - program the MAC address for port 7\n"
+);
+#endif /* CFG_ID_EEPROM */
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 7042a9c..4fb3b65 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -178,6 +178,14 @@
 		printf("Device %d: %s", dev, nand_info[dev].name);
 		puts("... is now current device\n");
 		nand_curr_device = dev;
+
+#ifdef CFG_NAND_SELECT_DEVICE
+		/*
+		 * Select the chip in the board/cpu specific driver
+		 */
+		board_nand_select_device(nand_info[dev].priv, dev);
+#endif
+
 		return 0;
 	}
 
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index e804861..cc08743 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -43,8 +43,13 @@
 #else
 #define SCSI_DEV_ID		CONFIG_SCSI_DEV_ID
 #endif
+#elif defined CONFIG_SATA_ULI5288
+
+#define SCSI_VEND_ID 0x10b9
+#define SCSI_DEV_ID  0x5288
+
 #else
-#error CONFIG_SCSI_SYM53C8XX must be defined
+#error no scsi device defined
 #endif
 
 
diff --git a/common/ft_build.c b/common/ft_build.c
index b0560a2..980e40f 100644
--- a/common/ft_build.c
+++ b/common/ft_build.c
@@ -1,5 +1,22 @@
 /*
  * OF flat tree builder
+ * Written by: Pantelis Antoniou <pantelis.antoniou@gmail.com>
+ * Updated by: Matthew McClintock <msm@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
  */
 
 #include <common.h>
@@ -13,44 +30,39 @@
 
 #include <ft_build.h>
 
+#undef DEBUG
+
 /* align addr on a size boundary - adjust address up if needed -- Cort */
 #define _ALIGN(addr,size)       (((addr)+(size)-1)&(~((size)-1)))
+#ifndef CONFIG_OF_BOOT_CPU
+#define CONFIG_OF_BOOT_CPU 0
+#endif
+#define SIZE_OF_RSVMAP_ENTRY (2*sizeof(u64))
 
 static void ft_put_word(struct ft_cxt *cxt, u32 v)
 {
-	if (cxt->overflow)	/* do nothing */
-		return;
-
-	/* check for overflow */
-	if (cxt->p + 4 > cxt->pstr) {
-		cxt->overflow = 1;
-		return;
-	}
+	memmove(cxt->p + sizeof(u32), cxt->p, cxt->p_end - cxt->p);
 
 	*(u32 *) cxt->p = cpu_to_be32(v);
-	cxt->p += 4;
+	cxt->p += sizeof(u32);
+	cxt->p_end += sizeof(u32);
 }
 
 static inline void ft_put_bin(struct ft_cxt *cxt, const void *data, int sz)
 {
-	u8 *p;
+	int aligned_size = ((u8 *)_ALIGN((unsigned long)cxt->p + sz,
+					sizeof(u32))) - cxt->p;
 
-	if (cxt->overflow)	/* do nothing */
-		return;
+	memmove(cxt->p + aligned_size, cxt->p, cxt->p_end - cxt->p);
 
-	/* next pointer pos */
-	p = (u8 *) _ALIGN((unsigned long)cxt->p + sz, 4);
-
-	/* check for overflow */
-	if (p > cxt->pstr) {
-		cxt->overflow = 1;
-		return;
-	}
+	/* make sure the last bytes are zeroed */
+	memset(cxt->p + aligned_size - (aligned_size % sizeof(u32)), 0,
+			(aligned_size % sizeof(u32)));
 
 	memcpy(cxt->p, data, sz);
-	if ((sz & 3) != 0)
-		memset(cxt->p + sz, 0, 4 - (sz & 3));
-	cxt->p = p;
+
+	cxt->p += aligned_size;
+	cxt->p_end += aligned_size;
 }
 
 void ft_begin_node(struct ft_cxt *cxt, const char *name)
@@ -73,11 +85,11 @@
 {
 	u8 *p;
 
-	p = cxt->pstr;
-	while (p < cxt->pstr_begin) {
-		if (strcmp(p, name) == 0)
-			return p - cxt->p_begin;
-		p += strlen(p) + 1;
+	p = cxt->p;
+	while (p < cxt->p_end) {
+		if (strcmp((char *)p, name) == 0)
+			return p - cxt->p;
+		p += strlen((char *)p) + 1;
 	}
 
 	return -1;
@@ -85,24 +97,13 @@
 
 void ft_prop(struct ft_cxt *cxt, const char *name, const void *data, int sz)
 {
-	int len, off;
-
-	if (cxt->overflow)
-		return;
-
-	len = strlen(name) + 1;
+	int off = 0;
 
 	off = lookup_string(cxt, name);
 	if (off == -1) {
-		/* check if we have space */
-		if (cxt->p + 12 + sz + len > cxt->pstr) {
-			cxt->overflow = 1;
-			return;
-		}
-
-		cxt->pstr -= len;
-		memcpy(cxt->pstr, name, len);
-		off = cxt->pstr - cxt->p_begin;
+		memcpy(cxt->p_end, name, strlen(name) + 1);
+		off = cxt->p_end - cxt->p;
+		cxt->p_end += strlen(name) + 1;
 	}
 
 	/* now put offset from beginning of *STRUCTURE* */
@@ -122,137 +123,62 @@
 {
 	u32 v = cpu_to_be32((u32) val);
 
-	ft_prop(cxt, name, &v, 4);
+	ft_prop(cxt, name, &v, sizeof(u32));
 }
 
-/* start construction of the flat OF tree */
-void ft_begin(struct ft_cxt *cxt, void *blob, int max_size)
+/* pick up and start working on a tree in place */
+void ft_init_cxt(struct ft_cxt *cxt, void *blob)
 {
 	struct boot_param_header *bph = blob;
-	u32 off;
 
-	/* clear the cxt */
 	memset(cxt, 0, sizeof(*cxt));
 
 	cxt->bph = bph;
-	cxt->max_size = max_size;
+	bph->boot_cpuid_phys = CONFIG_OF_BOOT_CPU;
 
-	/* zero everything in the header area */
-	memset(bph, 0, sizeof(*bph));
+	/* find beginning and end of reserve map table (zeros in last entry) */
+	cxt->p_rsvmap = (u8 *)bph + bph->off_mem_rsvmap;
+	while ( ((uint64_t *)cxt->p_rsvmap)[0] != 0 &&
+		     ((uint64_t *)cxt->p_rsvmap)[1] != 0 ) {
+	cxt->p_rsvmap += SIZE_OF_RSVMAP_ENTRY;
+	}
 
-	bph->magic = cpu_to_be32(OF_DT_HEADER);
-	bph->version = cpu_to_be32(0x10);
-	bph->last_comp_version = cpu_to_be32(0x10);
-
-	/* start pointers */
-	cxt->pres_begin = (u8 *) _ALIGN((unsigned long)(bph + 1), 8);
-	cxt->pres = cxt->pres_begin;
-
-	off = (unsigned long)cxt->pres_begin - (unsigned long)bph;
-	bph->off_mem_rsvmap = cpu_to_be32(off);
-
-	((u64 *) cxt->pres)[0] = 0;	/* phys = 0, size = 0, terminate */
-	((u64 *) cxt->pres)[1] = 0;
-
-	cxt->p_anchor = cxt->pres + 16;	/* over the terminator */
+	cxt->p_start = (u8 *)bph + bph->off_dt_struct;
+	cxt->p_end = (u8 *)bph + bph->totalsize;
+	cxt->p = (u8 *)bph + bph->off_dt_strings;
 }
 
 /* add a reserver physical area to the rsvmap */
-void ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size)
+void ft_add_rsvmap(struct ft_cxt *cxt, u64 physstart, u64 physend)
 {
-	((u64 *) cxt->pres)[0] = cpu_to_be64(physaddr);	/* phys = 0, size = 0, terminate */
-	((u64 *) cxt->pres)[1] = cpu_to_be64(size);
+	memmove(cxt->p_rsvmap + SIZE_OF_RSVMAP_ENTRY, cxt->p_rsvmap,
+				 cxt->p_end - cxt->p_rsvmap);
 
-	cxt->pres += 16;	/* advance */
+	((u64 *)cxt->p_rsvmap)[0] = cpu_to_be64(physstart);
+	((u64 *)cxt->p_rsvmap)[1] = cpu_to_be64(physend);
+	((u64 *)cxt->p_rsvmap)[2] = 0;
+	((u64 *)cxt->p_rsvmap)[3] = 0;
 
-	((u64 *) cxt->pres)[0] = 0;	/* phys = 0, size = 0, terminate */
-	((u64 *) cxt->pres)[1] = 0;
-
-	/* keep track of size */
-	cxt->res_size = cxt->pres + 16 - cxt->pres_begin;
-
-	cxt->p_anchor = cxt->pres + 16;	/* over the terminator */
+	cxt->p_rsvmap += SIZE_OF_RSVMAP_ENTRY;
+	cxt->p_start += SIZE_OF_RSVMAP_ENTRY;
+	cxt->p += SIZE_OF_RSVMAP_ENTRY;
+	cxt->p_end += SIZE_OF_RSVMAP_ENTRY;
 }
 
-void ft_begin_tree(struct ft_cxt *cxt)
+void ft_end_tree(struct ft_cxt *cxt)
 {
-	cxt->p_begin = cxt->p_anchor;
-	cxt->pstr_begin = (char *)cxt->bph + cxt->max_size;	/* point at the end */
-
-	cxt->p = cxt->p_begin;
-	cxt->pstr = cxt->pstr_begin;
-}
-
-int ft_end_tree(struct ft_cxt *cxt)
-{
-	struct boot_param_header *bph = cxt->bph;
-	int off, sz, sz1;
-	u32 tag, v;
-	u8 *p;
-
 	ft_put_word(cxt, OF_DT_END);
-
-	if (cxt->overflow)
-		return -ENOMEM;
-
-	/* size of the areas */
-	cxt->struct_size = cxt->p - cxt->p_begin;
-	cxt->strings_size = cxt->pstr_begin - cxt->pstr;
-
-	/* the offset we must move */
-	off = (cxt->pstr_begin - cxt->p_begin) - cxt->strings_size;
-
-	/* the new strings start */
-	cxt->pstr_begin = cxt->p_begin + cxt->struct_size;
-
-	/* move the whole string area */
-	memmove(cxt->pstr_begin, cxt->pstr, cxt->strings_size);
-
-	/* now perform the fixup of the strings */
-	p = cxt->p_begin;
-	while ((tag = be32_to_cpu(*(u32 *) p)) != OF_DT_END) {
-		p += 4;
-
-		if (tag == OF_DT_BEGIN_NODE) {
-			p = (u8 *) _ALIGN((unsigned long)p + strlen(p) + 1, 4);
-			continue;
-		}
-
-		if (tag == OF_DT_END_NODE || tag == OF_DT_NOP)
-			continue;
-
-		if (tag != OF_DT_PROP)
-			return -EINVAL;
-
-		sz = be32_to_cpu(*(u32 *) p);
-		p += 4;
-
-		v = be32_to_cpu(*(u32 *) p);
-		v -= off;
-		*(u32 *) p = cpu_to_be32(v);	/* move down */
-		p += 4;
-
-		p = (u8 *) _ALIGN((unsigned long)p + sz, 4);
-	}
-
-	/* fix sizes */
-	p = (char *)cxt->bph;
-	sz = (cxt->pstr_begin + cxt->strings_size) - p;
-	sz1 = _ALIGN(sz, 16);	/* align at 16 bytes */
-	if (sz != sz1)
-		memset(p + sz, 0, sz1 - sz);
-	bph->totalsize = cpu_to_be32(sz1);
-	bph->off_dt_struct = cpu_to_be32(cxt->p_begin - p);
-	bph->off_dt_strings = cpu_to_be32(cxt->pstr_begin - p);
-
-	/* the new strings start */
-	cxt->pstr_begin = cxt->p_begin + cxt->struct_size;
-	cxt->pstr = cxt->pstr_begin + cxt->strings_size;
-
-	return 0;
 }
 
-/**********************************************************************/
+/* update the boot param header with correct values */
+void ft_finalize_tree(struct ft_cxt *cxt) {
+	struct boot_param_header *bph = cxt->bph;
+
+	bph->totalsize = cxt->p_end - (u8 *)bph;
+	bph->off_dt_struct = cxt->p_start - (u8 *)bph;
+	bph->off_dt_strings = cxt->p - (u8 *)bph;
+	bph->dt_strings_size = cxt->p_end - cxt->p;
+}
 
 static inline int isprint(int c)
 {
@@ -301,16 +227,16 @@
 
 	switch (len) {
 	case 1:		/* byte */
-		printf(" = <0x%02x>", (*(u8 *) data) & 0xff);
+		printf(" = <%02x>", (*(u8 *) data) & 0xff);
 		break;
 	case 2:		/* half-word */
-		printf(" = <0x%04x>", be16_to_cpu(*(u16 *) data) & 0xffff);
+		printf(" = <%04x>", be16_to_cpu(*(u16 *) data) & 0xffff);
 		break;
 	case 4:		/* word */
-		printf(" = <0x%08x>", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
+		printf(" = <%x>", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
 		break;
 	case 8:		/* double-word */
-		printf(" = <0x%16llx>", be64_to_cpu(*(uint64_t *) data));
+		printf(" = <%qx>", be64_to_cpu(*(uint64_t *) data));
 		break;
 	default:		/* anything else... hexdump */
 		printf(" = [");
@@ -352,7 +278,7 @@
 		if (addr == 0 && size == 0)
 			break;
 
-		printf("/memreserve/ 0x%llx 0x%llx;\n", addr, size);
+		printf("/memreserve/ %qx %qx;\n", addr, size);
 	}
 
 	p = p_struct;
@@ -383,8 +309,8 @@
 		}
 
 		if (tag != OF_DT_PROP) {
-			fprintf(stderr, "%*s ** Unknown tag 0x%08x\n",
-				depth * shift, "", tag);
+			fprintf(stderr, "%*s ** Unknown tag 0x%08x at 0x%x\n",
+				depth * shift, "", tag, --p);
 			break;
 		}
 		sz = be32_to_cpu(*p++);
@@ -399,64 +325,15 @@
 
 void ft_backtrack_node(struct ft_cxt *cxt)
 {
-	if (be32_to_cpu(*(u32 *) (cxt->p - 4)) != OF_DT_END_NODE)
-		return;		/* XXX only for node */
+	int i = 4;
 
-	cxt->p -= 4;
-}
+	while (be32_to_cpu(*(u32 *) (cxt->p - i)) != OF_DT_END_NODE)
+		i += 4;
 
-/* note that the root node of the blob is "peeled" off */
-void ft_merge_blob(struct ft_cxt *cxt, void *blob)
-{
-	struct boot_param_header *bph = (struct boot_param_header *)blob;
-	u32 *p_struct = (u32 *) ((char *)bph + be32_to_cpu(bph->off_dt_struct));
-	u32 *p_strings =
-	    (u32 *) ((char *)bph + be32_to_cpu(bph->off_dt_strings));
-	u32 tag, *p;
-	char *s, *t;
-	int depth, sz;
+	memmove (cxt->p - i, cxt->p, cxt->p_end - cxt->p);
 
-	if (be32_to_cpu(*(u32 *) (cxt->p - 4)) != OF_DT_END_NODE)
-		return;		/* XXX only for node */
-
-	cxt->p -= 4;
-
-	depth = 0;
-	p = p_struct;
-	while ((tag = be32_to_cpu(*p++)) != OF_DT_END) {
-
-		/* printf("tag: 0x%08x (%d) - %d\n", tag, p - p_struct, depth); */
-
-		if (tag == OF_DT_BEGIN_NODE) {
-			s = (char *)p;
-			p = (u32 *) _ALIGN((unsigned long)p + strlen(s) + 1, 4);
-
-			if (depth++ > 0)
-				ft_begin_node(cxt, s);
-
-			continue;
-		}
-
-		if (tag == OF_DT_END_NODE) {
-			ft_end_node(cxt);
-			if (--depth == 0)
-				break;
-			continue;
-		}
-
-		if (tag == OF_DT_NOP)
-			continue;
-
-		if (tag != OF_DT_PROP)
-			break;
-
-		sz = be32_to_cpu(*p++);
-		s = (char *)p_strings + be32_to_cpu(*p++);
-		t = (char *)p;
-		p = (u32 *) _ALIGN((unsigned long)p + sz, 4);
-
-		ft_prop(cxt, s, t, sz);
-	}
+	cxt->p_end -= i;
+	cxt->p -= i;
 }
 
 void *ft_get_prop(void *bphp, const char *propname, int *szp)
@@ -523,9 +400,6 @@
 
 /********************************************************************/
 
-extern unsigned char oftree_dtb[];
-extern unsigned int oftree_dtb_len;
-
 /* Function that returns a character from the environment */
 extern uchar(*env_get_char) (int);
 
@@ -579,7 +453,7 @@
 };
 #endif
 
-void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_end)
+void ft_setup(void *blob, bd_t * bd, ulong initrd_start, ulong initrd_end)
 {
 	u32 *p;
 	int len;
@@ -602,20 +476,16 @@
 		return;
 	}
 
-	ft_begin(&cxt, blob, size);
+#ifdef DEBUG
+	printf ("recieved oftree\n");
+	ft_dump_blob(blob);
+#endif
+
+	ft_init_cxt(&cxt, blob);
 
 	if (initrd_start && initrd_end)
 		ft_add_rsvmap(&cxt, initrd_start, initrd_end - initrd_start + 1);
 
-	ft_begin_tree(&cxt);
-
-	ft_begin_node(&cxt, "");
-
-	ft_end_node(&cxt);
-
-	/* copy RO tree */
-	ft_merge_blob(&cxt, oftree_dtb);
-
 	/* back into root */
 	ft_backtrack_node(&cxt);
 
@@ -644,8 +514,8 @@
 #endif
 
 	ft_begin_node(&cxt, "chosen");
-
 	ft_prop_str(&cxt, "name", "chosen");
+
 	ft_prop_str(&cxt, "bootargs", getenv("bootargs"));
 	ft_prop_int(&cxt, "linux,platform", 0x600);	/* what is this? */
 	if (initrd_start && initrd_end) {
@@ -661,11 +531,7 @@
 	ft_end_node(&cxt);	/* end root */
 
 	ft_end_tree(&cxt);
-
-	/*
-	   printf("merged OF-tree\n");
-	   ft_dump_blob(blob);
-	 */
+	ft_finalize_tree(&cxt);
 
 #ifdef CONFIG_OF_HAS_BD_T
 	/* paste the bd_t at the end of the flat tree */
@@ -714,11 +580,12 @@
 	ft_board_setup(blob, bd);
 #endif
 
-	/*
-	   printf("final OF-tree\n");
-	   ft_dump_blob(blob);
-	 */
+	/* in case the size changed in the platform code */
+	ft_finalize_tree(&cxt);
 
+#ifdef DEBUG
+	printf("final OF-tree\n");
+	ft_dump_blob(blob);
+#endif
 }
-
 #endif
diff --git a/common/lcd.c b/common/lcd.c
index df31ca9..eaed2ab 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -578,7 +578,9 @@
  */
 int lcd_display_bitmap(ulong bmp_image, int x, int y)
 {
+#if !defined(CONFIG_MCC200)
 	ushort *cmap;
+#endif
 	ushort i, j;
 	uchar *fb;
 	bmp_image_t *bmp=(bmp_image_t *)bmp_image;
@@ -624,13 +626,13 @@
 	debug ("Display-bmp: %d x %d  with %d colors\n",
 		(int)width, (int)height, (int)colors);
 
+#if !defined(CONFIG_MCC200)
+	/* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */
 	if (bpix==8) {
 #if defined(CONFIG_PXA250)
 		cmap = (ushort *)fbi->palette;
 #elif defined(CONFIG_MPC823)
 		cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]);
-#elif defined(CONFIG_MCC200)
-		/* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */
 #else
 # error "Don't know location of color map"
 #endif
@@ -654,6 +656,7 @@
 #endif
 		}
 	}
+#endif
 
 	/*
 	 *  BMP format for Monochrome assumes that the state of a
diff --git a/common/miiphybb.c b/common/miiphybb.c
index adb697c..537c15d 100644
--- a/common/miiphybb.c
+++ b/common/miiphybb.c
@@ -41,7 +41,7 @@
 static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
 {
 	int j;			/* counter */
-#ifndef CONFIG_EP8248
+#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
 	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
 #endif
 
@@ -126,7 +126,7 @@
 {
 	short rdreg;		/* register working value */
 	int j;			/* counter */
-#ifndef CONFIG_EP8248
+#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
 	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
 #endif
 
@@ -193,7 +193,7 @@
 		unsigned char reg, unsigned short value)
 {
 	int j;			/* counter */
-#ifndef CONFIG_EP8248
+#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
 	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
 #endif
 
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 69ecf18..06ea99b 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -932,8 +932,8 @@
 	const unsigned char max_vendor_len = 40;
 	const unsigned char max_product_len = 20;
 	if (descriptor.idVendor == 0x0424 && descriptor.idProduct == 0x223a) {
-		strncpy(vendor, "SMSC", max_vendor_len);
-		strncpy(product, "Flash Media Cntrller", max_product_len);
+		strncpy ((char *)vendor, "SMSC", max_vendor_len);
+		strncpy ((char *)product, "Flash Media Cntrller", max_product_len);
 	}
 }
 #endif /* CONFIG_USB_BIN_FIXUP */
diff --git a/config.mk b/config.mk
index d32f51e..46e956f 100644
--- a/config.mk
+++ b/config.mk
@@ -169,7 +169,7 @@
 endif
 endif
 
-AFLAGS_DEBUG := -Wa,-gstabs
+AFLAGS_DEBUG := -Wa,-g
 
 # turn jbsr into jsr for m68k
 ifeq ($(ARCH),m68k)
diff --git a/cpu/at32ap/Makefile b/cpu/at32ap/Makefile
new file mode 100644
index 0000000..8ce79e9
--- /dev/null
+++ b/cpu/at32ap/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2005-2006 Atmel Corporation.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)lib$(CPU).a
+
+START	:= start.o
+SOBJS	:= entry.o
+COBJS	:= cpu.o hsdramc.o exception.o cache.o
+COBJS	+= interrupts.o device.o pm.o pio.o
+SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+START	:= $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+	$(AR) crv $@ $^
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/at32ap/at32ap7000/Makefile b/cpu/at32ap/at32ap7000/Makefile
new file mode 100644
index 0000000..1cd9444
--- /dev/null
+++ b/cpu/at32ap/at32ap7000/Makefile
@@ -0,0 +1,43 @@
+#
+# Copyright (C) 2005-2006 Atmel Corporation
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)lib$(SOC).a
+
+COBJS	:= hebi.o devices.o
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+	$(AR) crv $@ $^
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/at32ap/at32ap7000/devices.c b/cpu/at32ap/at32ap7000/devices.c
new file mode 100644
index 0000000..8b216e9
--- /dev/null
+++ b/cpu/at32ap/at32ap7000/devices.c
@@ -0,0 +1,448 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/arch/memory-map.h>
+#include <asm/arch/platform.h>
+
+#include "../sm.h"
+
+#define ARRAY_SIZE(x)	(sizeof(x) / sizeof((x)[0]))
+
+const struct clock_domain chip_clock[] = {
+	[CLOCK_CPU] = {
+		.reg	= SM_PM_CPU_MASK,
+		.id	= CLOCK_CPU,
+		.bridge	= NO_DEVICE,
+	},
+	[CLOCK_HSB] = {
+		.reg	= SM_PM_HSB_MASK,
+		.id	= CLOCK_HSB,
+		.bridge	= NO_DEVICE,
+	},
+	[CLOCK_PBA] = {
+		.reg	= SM_PM_PBA_MASK,
+		.id	= CLOCK_PBA,
+		.bridge	= DEVICE_PBA_BRIDGE,
+	},
+	[CLOCK_PBB] = {
+		.reg	= SM_PM_PBB_MASK,
+		.id	= CLOCK_PBB,
+		.bridge	= DEVICE_PBB_BRIDGE,
+	},
+};
+
+static const struct resource hebi_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_HSB, 0 },
+		},
+	}, {
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBB, 13 },
+		},
+	}, {
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBB, 14 },
+		},
+	}, {
+		.type	= RESOURCE_GPIO,
+		.u	= {
+			.gpio	= { 27, DEVICE_PIOE, GPIO_FUNC_A, 0 },
+		},
+	},
+};
+static const struct resource pba_bridge_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_HSB, 1 },
+		}
+	}, {
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			/* HSB-HSB Bridge */
+			.clock	= { CLOCK_HSB, 4 },
+		},
+	},
+};
+static const struct resource pbb_bridge_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_HSB, 2 },
+		},
+	},
+};
+static const struct resource hramc_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_HSB, 3 },
+		},
+	},
+};
+static const struct resource pioa_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBA, 10 },
+		},
+	},
+};
+static const struct resource piob_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBA, 11 },
+		},
+	},
+};
+static const struct resource pioc_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBA, 12 },
+		},
+	},
+};
+static const struct resource piod_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBA, 13 },
+		},
+	},
+};
+static const struct resource pioe_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBA, 14 },
+		},
+	},
+};
+static const struct resource sm_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBB, 0 },
+		},
+	},
+};
+static const struct resource intc_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock = { CLOCK_PBB, 1 },
+		},
+	},
+};
+static const struct resource hmatrix_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock = { CLOCK_PBB, 2 },
+		},
+	},
+};
+#if defined(CFG_HPDC)
+static const struct resource hpdc_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBA, 16 },
+		},
+	},
+};
+#endif
+#if defined(CFG_MACB0)
+static const struct resource macb0_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_HSB, 8 },
+		},
+	}, {
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBB, 6 },
+		},
+	}, {
+		.type	= RESOURCE_GPIO,
+		.u	= {
+			.gpio	= { 19, DEVICE_PIOC, GPIO_FUNC_A, 0 },
+		},
+	},
+};
+#endif
+#if defined(CFG_MACB1)
+static const struct resource macb1_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_HSB, 9 },
+		},
+	}, {
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBB, 7 },
+		},
+	}, {
+		.type	= RESOURCE_GPIO,
+		.u	= {
+			.gpio	= { 12, DEVICE_PIOC, GPIO_FUNC_B, 19 },
+		},
+	}, {
+		.type	= RESOURCE_GPIO,
+		.u	= {
+			.gpio	= { 14, DEVICE_PIOD, GPIO_FUNC_B, 2 },
+		},
+	},
+};
+#endif
+#if defined(CFG_LCDC)
+static const struct resource lcdc_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_HSB, 7 },
+		},
+	},
+};
+#endif
+#if defined(CFG_USART0)
+static const struct resource usart0_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBA, 3 },
+		},
+	}, {
+		.type	= RESOURCE_GPIO,
+		.u	= {
+			.gpio = { 2, DEVICE_PIOA, GPIO_FUNC_B, 8 },
+		},
+	},
+};
+#endif
+#if defined(CFG_USART1)
+static const struct resource usart1_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBA, 4 },
+		},
+	}, {
+		.type	= RESOURCE_GPIO,
+		.u	= {
+			.gpio = { 2, DEVICE_PIOA, GPIO_FUNC_A, 17 },
+		},
+	},
+};
+#endif
+#if defined(CFG_USART2)
+static const struct resource usart2_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBA, 5 },
+		},
+	}, {
+		.type	= RESOURCE_GPIO,
+		.u	= {
+			.gpio = { 2, DEVICE_PIOB, GPIO_FUNC_B, 26 },
+		},
+	},
+};
+#endif
+#if defined(CFG_USART3)
+static const struct resource usart3_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBA, 6 },
+		},
+	}, {
+		.type	= RESOURCE_GPIO,
+		.u	= {
+			.gpio = { 2, DEVICE_PIOB, GPIO_FUNC_B, 17 },
+		},
+	},
+};
+#endif
+#if defined(CFG_MMCI)
+static const struct resource mmci_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_PBB, 9 },
+		},
+	}, {
+		.type	= RESOURCE_GPIO,
+		.u	= {
+			.gpio = { 6, DEVICE_PIOA, GPIO_FUNC_A, 10 },
+		},
+	},
+};
+#endif
+#if defined(CFG_DMAC)
+static const struct resource dmac_resource[] = {
+	{
+		.type	= RESOURCE_CLOCK,
+		.u	= {
+			.clock	= { CLOCK_HSB, 10 },
+		},
+	},
+};
+#endif
+
+const struct device chip_device[] = {
+	[DEVICE_HEBI] = {
+		.regs		= (void *)HSMC_BASE,
+		.nr_resources	= ARRAY_SIZE(hebi_resource),
+		.resource	= hebi_resource,
+	},
+	[DEVICE_PBA_BRIDGE] = {
+		.nr_resources	= ARRAY_SIZE(pba_bridge_resource),
+		.resource	= pba_bridge_resource,
+	},
+	[DEVICE_PBB_BRIDGE] = {
+		.nr_resources	= ARRAY_SIZE(pbb_bridge_resource),
+		.resource	= pbb_bridge_resource,
+	},
+	[DEVICE_HRAMC] = {
+		.nr_resources	= ARRAY_SIZE(hramc_resource),
+		.resource	= hramc_resource,
+	},
+	[DEVICE_PIOA] = {
+		.regs		= (void *)PIOA_BASE,
+		.nr_resources	= ARRAY_SIZE(pioa_resource),
+		.resource	= pioa_resource,
+	},
+	[DEVICE_PIOB] = {
+		.regs		= (void *)PIOB_BASE,
+		.nr_resources	= ARRAY_SIZE(piob_resource),
+		.resource	= piob_resource,
+	},
+	[DEVICE_PIOC] = {
+		.regs		= (void *)PIOC_BASE,
+		.nr_resources	= ARRAY_SIZE(pioc_resource),
+		.resource	= pioc_resource,
+	},
+	[DEVICE_PIOD] = {
+		.regs		= (void *)PIOD_BASE,
+		.nr_resources	= ARRAY_SIZE(piod_resource),
+		.resource	= piod_resource,
+	},
+	[DEVICE_PIOE] = {
+		.regs		= (void *)PIOE_BASE,
+		.nr_resources	= ARRAY_SIZE(pioe_resource),
+		.resource	= pioe_resource,
+	},
+	[DEVICE_SM] = {
+		.regs		= (void *)SM_BASE,
+		.nr_resources	= ARRAY_SIZE(sm_resource),
+		.resource	= sm_resource,
+	},
+	[DEVICE_INTC] = {
+		.regs		= (void *)INTC_BASE,
+		.nr_resources	= ARRAY_SIZE(intc_resource),
+		.resource	= intc_resource,
+	},
+	[DEVICE_HMATRIX] = {
+		.regs		= (void *)HMATRIX_BASE,
+		.nr_resources	= ARRAY_SIZE(hmatrix_resource),
+		.resource	= hmatrix_resource,
+	},
+#if defined(CFG_HPDC)
+	[DEVICE_HPDC] = {
+		.nr_resources	= ARRAY_SIZE(hpdc_resource),
+		.resource	= hpdc_resource,
+	},
+#endif
+#if defined(CFG_MACB0)
+	[DEVICE_MACB0] = {
+		.regs		= (void *)MACB0_BASE,
+		.nr_resources	= ARRAY_SIZE(macb0_resource),
+		.resource	= macb0_resource,
+	},
+#endif
+#if defined(CFG_MACB1)
+	[DEVICE_MACB1] = {
+		.regs		= (void *)MACB1_BASE,
+		.nr_resources	= ARRAY_SIZE(macb1_resource),
+		.resource	= macb1_resource,
+	},
+#endif
+#if defined(CFG_LCDC)
+	[DEVICE_LCDC] = {
+		.nr_resources	= ARRAY_SIZE(lcdc_resource),
+		.resource	= lcdc_resource,
+	},
+#endif
+#if defined(CFG_USART0)
+	[DEVICE_USART0] = {
+		.regs		= (void *)USART0_BASE,
+		.nr_resources	= ARRAY_SIZE(usart0_resource),
+		.resource	= usart0_resource,
+	},
+#endif
+#if defined(CFG_USART1)
+	[DEVICE_USART1] = {
+		.regs		= (void *)USART1_BASE,
+		.nr_resources	= ARRAY_SIZE(usart1_resource),
+		.resource	= usart1_resource,
+	},
+#endif
+#if defined(CFG_USART2)
+	[DEVICE_USART2] = {
+		.regs		= (void *)USART2_BASE,
+		.nr_resources	= ARRAY_SIZE(usart2_resource),
+		.resource	= usart2_resource,
+	},
+#endif
+#if defined(CFG_USART3)
+	[DEVICE_USART3] = {
+		.regs		= (void *)USART3_BASE,
+		.nr_resources	= ARRAY_SIZE(usart3_resource),
+		.resource	= usart3_resource,
+	},
+#endif
+#if defined(CFG_MMCI)
+	[DEVICE_MMCI] = {
+		.regs		= (void *)MMCI_BASE,
+		.nr_resources	= ARRAY_SIZE(mmci_resource),
+		.resource	= mmci_resource,
+	},
+#endif
+#if defined(CFG_DMAC)
+	[DEVICE_DMAC] = {
+		.regs		= (void *)DMAC_BASE,
+		.nr_resources	= ARRAY_SIZE(dmac_resource),
+		.resource	= dmac_resource,
+	},
+#endif
+};
diff --git a/cpu/at32ap/at32ap7000/hebi.c b/cpu/at32ap/at32ap7000/hebi.c
new file mode 100644
index 0000000..3b32adf
--- /dev/null
+++ b/cpu/at32ap/at32ap7000/hebi.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/hmatrix2.h>
+#include <asm/arch/memory-map.h>
+#include <asm/arch/platform.h>
+
+void cpu_enable_sdram(void)
+{
+	const struct device *hmatrix;
+
+	hmatrix = get_device(DEVICE_HMATRIX);
+
+	/* Set the SDRAM_ENABLE bit in the HEBI SFR */
+	hmatrix2_writel(hmatrix, SFR4, 1 << 1);
+}
diff --git a/cpu/at32ap/cache.c b/cpu/at32ap/cache.c
new file mode 100644
index 0000000..41fb5aa
--- /dev/null
+++ b/cpu/at32ap/cache.c
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <asm/cacheflush.h>
+
+void dcache_clean_range(volatile void *start, size_t size)
+{
+	unsigned long v, begin, end, linesz;
+
+	linesz = CFG_DCACHE_LINESZ;
+
+	/* You asked for it, you got it */
+	begin = (unsigned long)start & ~(linesz - 1);
+	end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1);
+
+	for (v = begin; v < end; v += linesz)
+		dcache_clean_line((void *)v);
+
+	sync_write_buffer();
+}
+
+void dcache_invalidate_range(volatile void *start, size_t size)
+{
+	unsigned long v, begin, end, linesz;
+
+	linesz = CFG_DCACHE_LINESZ;
+
+	/* You asked for it, you got it */
+	begin = (unsigned long)start & ~(linesz - 1);
+	end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1);
+
+	for (v = begin; v < end; v += linesz)
+		dcache_invalidate_line((void *)v);
+}
+
+void dcache_flush_range(volatile void *start, size_t size)
+{
+	unsigned long v, begin, end, linesz;
+
+	linesz = CFG_DCACHE_LINESZ;
+
+	/* You asked for it, you got it */
+	begin = (unsigned long)start & ~(linesz - 1);
+	end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1);
+
+	for (v = begin; v < end; v += linesz)
+		dcache_flush_line((void *)v);
+
+	sync_write_buffer();
+}
+
+void icache_invalidate_range(volatile void *start, size_t size)
+{
+	unsigned long v, begin, end, linesz;
+
+	linesz = CFG_ICACHE_LINESZ;
+
+	/* You asked for it, you got it */
+	begin = (unsigned long)start & ~(linesz - 1);
+	end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1);
+
+	for (v = begin; v < end; v += linesz)
+		icache_invalidate_line((void *)v);
+}
+
+/*
+ * This is called after loading something into memory.  We need to
+ * make sure that everything that was loaded is actually written to
+ * RAM, and that the icache will look for it. Cleaning the dcache and
+ * invalidating the icache will do the trick.
+ */
+void  flush_cache (unsigned long start_addr, unsigned long size)
+{
+	dcache_clean_range((void *)start_addr, size);
+	icache_invalidate_range((void *)start_addr, size);
+}
diff --git a/cpu/at32ap/config.mk b/cpu/at32ap/config.mk
new file mode 100644
index 0000000..1c12169
--- /dev/null
+++ b/cpu/at32ap/config.mk
@@ -0,0 +1,22 @@
+#
+# Copyright (C) 2005-2006 Atmel Corporation
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+PLATFORM_RELFLAGS       += -mcpu=ap7000
diff --git a/cpu/at32ap/cpu.c b/cpu/at32ap/cpu.c
new file mode 100644
index 0000000..37e3ea0
--- /dev/null
+++ b/cpu/at32ap/cpu.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <command.h>
+
+#include <asm/io.h>
+#include <asm/sections.h>
+#include <asm/sysreg.h>
+
+#include <asm/arch/memory-map.h>
+#include <asm/arch/platform.h>
+
+#include "hsmc3.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int cpu_init(void)
+{
+	const struct device *hebi;
+	extern void _evba(void);
+	char *p;
+
+	gd->cpu_hz = CFG_OSC0_HZ;
+
+	/* fff03400: 00010001 04030402 00050005 10011103 */
+	hebi = get_device(DEVICE_HEBI);
+	hsmc3_writel(hebi, MODE0, 0x00031103);
+	hsmc3_writel(hebi, CYCLE0, 0x000c000d);
+	hsmc3_writel(hebi, PULSE0, 0x0b0a0906);
+	hsmc3_writel(hebi, SETUP0, 0x00010002);
+
+	pm_init();
+
+	sysreg_write(EVBA, (unsigned long)&_evba);
+	asm volatile("csrf	%0" : : "i"(SYSREG_EM_OFFSET));
+	gd->console_uart = get_device(CFG_CONSOLE_UART_DEV);
+
+	/* Lock everything that mess with the flash in the icache */
+	for (p = __flashprog_start; p <= (__flashprog_end + CFG_ICACHE_LINESZ);
+	     p += CFG_ICACHE_LINESZ)
+		asm volatile("cache %0, 0x02" : "=m"(*p) :: "memory");
+
+	return 0;
+}
+
+void prepare_to_boot(void)
+{
+	/* Flush both caches and the write buffer */
+	asm volatile("cache  %0[4], 010\n\t"
+		     "cache  %0[0], 000\n\t"
+		     "sync   0" : : "r"(0) : "memory");
+}
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	/* This will reset the CPU core, caches, MMU and all internal busses */
+	__builtin_mtdr(8, 1 << 13);	/* set DC:DBE */
+	__builtin_mtdr(8, 1 << 30);	/* set DC:RES */
+
+	/* Flush the pipeline before we declare it a failure */
+	asm volatile("sub   pc, pc, -4");
+
+	return -1;
+}
diff --git a/cpu/at32ap/device.c b/cpu/at32ap/device.c
new file mode 100644
index 0000000..89914b6
--- /dev/null
+++ b/cpu/at32ap/device.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/arch/platform.h>
+
+#include "sm.h"
+
+struct device_state {
+	int refcount;
+};
+
+static struct device_state device_state[NR_DEVICES];
+
+static int claim_resource(const struct resource *res)
+{
+	int ret = 0;
+
+	switch (res->type) {
+	case RESOURCE_GPIO:
+		ret = gpio_set_func(res->u.gpio.gpio_dev,
+				    res->u.gpio.start,
+				    res->u.gpio.nr_pins,
+				    res->u.gpio.func);
+		break;
+	case RESOURCE_CLOCK:
+		ret = pm_enable_clock(res->u.clock.id, res->u.clock.index);
+		break;
+	}
+
+	return ret;
+}
+
+static void free_resource(const struct resource *res)
+{
+	switch (res->type) {
+	case RESOURCE_GPIO:
+		gpio_free(res->u.gpio.gpio_dev, res->u.gpio.start,
+			  res->u.gpio.nr_pins);
+		break;
+	case RESOURCE_CLOCK:
+		pm_disable_clock(res->u.clock.id, res->u.clock.index);
+		break;
+	}
+}
+
+static int init_dev(const struct device *dev)
+{
+	unsigned int i;
+	int ret = 0;
+
+	for (i = 0; i < dev->nr_resources; i++) {
+		ret = claim_resource(&dev->resource[i]);
+		if (ret)
+			goto cleanup;
+	}
+
+	return 0;
+
+cleanup:
+	while (i--)
+		free_resource(&dev->resource[i]);
+
+	return ret;
+}
+
+const struct device *get_device(enum device_id devid)
+{
+	struct device_state *devstate;
+	const struct device *dev;
+	unsigned long flags;
+	int initialized = 0;
+	int ret = 0;
+
+	devstate = &device_state[devid];
+	dev = &chip_device[devid];
+
+	flags = disable_interrupts();
+	if (devstate->refcount++)
+		initialized = 1;
+	if (flags)
+		enable_interrupts();
+
+	if (!initialized)
+		ret = init_dev(dev);
+
+	return ret ? NULL : dev;
+}
+
+void put_device(const struct device *dev)
+{
+	struct device_state *devstate;
+	unsigned long devid, flags;
+
+	devid = (unsigned long)(dev - chip_device) / sizeof(struct device);
+	devstate = &device_state[devid];
+
+	flags = disable_interrupts();
+	devstate--;
+	if (!devstate) {
+		unsigned int i;
+		for (i = 0; i < dev->nr_resources; i++)
+			free_resource(&dev->resource[i]);
+	}
+	if (flags)
+		enable_interrupts();
+}
diff --git a/cpu/at32ap/entry.S b/cpu/at32ap/entry.S
new file mode 100644
index 0000000..b52d798
--- /dev/null
+++ b/cpu/at32ap/entry.S
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <asm/sysreg.h>
+#include <asm/ptrace.h>
+
+	.section .text.exception,"ax"
+	.global	_evba
+	.type	_evba,@function
+	.align	10
+_evba:
+	.irp	x,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
+	.align	2
+	rjmp	unknown_exception
+	.endr
+
+	.global	timer_interrupt_handler
+	.type	timer_interrupt_handler,@function
+	.align	2
+timer_interrupt_handler:
+	/*
+	 * Increment timer_overflow and re-write COMPARE with 0xffffffff.
+	 *
+	 * We're running at interrupt level 3, so we don't need to save
+	 * r8-r12 or lr to the stack.
+	 */
+	mov	r8, lo(timer_overflow)
+	orh	r8, hi(timer_overflow)
+	ld.w	r9, r8[0]
+	mov	r10, -1
+	mtsr	SYSREG_COMPARE, r10
+	sub	r9, -1
+	st.w	r8[0], r9
+	rete
+
+	.type	unknown_exception, @function
+unknown_exception:
+	pushm	r0-r12
+	sub	r8, sp, REG_R12 - REG_R0 - 4
+	mov	r9, lr
+	mfsr	r10, SYSREG_RAR_EX
+	mfsr	r11, SYSREG_RSR_EX
+	pushm	r8-r11
+	mfsr	r12, SYSREG_ECR
+	mov	r11, sp
+	rcall	do_unknown_exception
+1:	rjmp	1b
diff --git a/cpu/at32ap/exception.c b/cpu/at32ap/exception.c
new file mode 100644
index 0000000..4123c44
--- /dev/null
+++ b/cpu/at32ap/exception.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/sysreg.h>
+#include <asm/ptrace.h>
+
+static const char * const cpu_modes[8] = {
+	"Application", "Supervisor", "Interrupt level 0", "Interrupt level 1",
+	"Interrupt level 2", "Interrupt level 3", "Exception", "NMI"
+};
+
+static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+{
+	unsigned long p;
+	int i;
+
+	printf("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+
+	for (p = bottom & ~31; p < top; ) {
+		printf("%04lx: ", p & 0xffff);
+
+		for (i = 0; i < 8; i++, p += 4) {
+			unsigned int val;
+
+			if (p < bottom || p >= top)
+				printf("         ");
+			else {
+				val = *(unsigned long *)p;
+				printf("%08x ", val);
+			}
+		}
+		printf("\n");
+	}
+}
+
+void do_unknown_exception(unsigned int ecr, struct pt_regs *regs)
+{
+	unsigned int mode;
+
+	printf("\n *** Unhandled exception %u at PC=0x%08lx\n", ecr, regs->pc);
+
+	switch (ecr) {
+	case ECR_BUS_ERROR_WRITE:
+	case ECR_BUS_ERROR_READ:
+		printf("Bus error at address 0x%08lx\n",
+		       sysreg_read(BEAR));
+		break;
+	case ECR_TLB_MULTIPLE:
+	case ECR_ADDR_ALIGN_X:
+	case ECR_PROTECTION_X:
+	case ECR_ADDR_ALIGN_R:
+	case ECR_ADDR_ALIGN_W:
+	case ECR_PROTECTION_R:
+	case ECR_PROTECTION_W:
+	case ECR_DTLB_MODIFIED:
+	case ECR_TLB_MISS_X:
+	case ECR_TLB_MISS_R:
+	case ECR_TLB_MISS_W:
+		printf("MMU exception at address 0x%08lx\n",
+		       sysreg_read(TLBEAR));
+		break;
+	}
+
+	printf("   pc: %08lx    lr: %08lx    sp: %08lx   r12: %08lx\n",
+	       regs->pc, regs->lr, regs->sp, regs->r12);
+	printf("  r11: %08lx   r10: %08lx    r9: %08lx    r8: %08lx\n",
+	       regs->r11, regs->r10, regs->r9, regs->r8);
+	printf("   r7: %08lx    r6: %08lx    r5: %08lx    r4: %08lx\n",
+	       regs->r7, regs->r6, regs->r5, regs->r4);
+	printf("   r3: %08lx    r2: %08lx    r1: %08lx    r0: %08lx\n",
+	       regs->r3, regs->r2, regs->r1, regs->r0);
+	printf("Flags: %c%c%c%c%c\n",
+	       regs->sr & SR_Q ? 'Q' : 'q',
+	       regs->sr & SR_V ? 'V' : 'v',
+	       regs->sr & SR_N ? 'N' : 'n',
+	       regs->sr & SR_Z ? 'Z' : 'z',
+	       regs->sr & SR_C ? 'C' : 'c');
+	printf("Mode bits: %c%c%c%c%c%c%c%c%c\n",
+	       regs->sr & SR_H ? 'H' : 'h',
+	       regs->sr & SR_R ? 'R' : 'r',
+	       regs->sr & SR_J ? 'J' : 'j',
+	       regs->sr & SR_EM ? 'E' : 'e',
+	       regs->sr & SR_I3M ? '3' : '.',
+	       regs->sr & SR_I2M ? '2' : '.',
+	       regs->sr & SR_I1M ? '1' : '.',
+	       regs->sr & SR_I0M ? '0' : '.',
+	       regs->sr & SR_GM ? 'G' : 'g');
+	mode = (regs->sr >> SYSREG_M0_OFFSET) & 7;
+	printf("CPU Mode: %s\n", cpu_modes[mode]);
+
+	/* Avoid exception loops */
+	if (regs->sp >= CFG_INIT_SP_ADDR
+	    || regs->sp < (CFG_INIT_SP_ADDR - CONFIG_STACKSIZE))
+		printf("\nStack pointer seems bogus, won't do stack dump\n");
+	else
+		dump_mem("\nStack: ", regs->sp, CFG_INIT_SP_ADDR);
+
+	panic("Unhandled exception\n");
+}
diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c
new file mode 100644
index 0000000..f36da35
--- /dev/null
+++ b/cpu/at32ap/hsdramc.c
@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CFG_HSDRAMC
+#include <asm/io.h>
+#include <asm/sdram.h>
+
+#include <asm/arch/platform.h>
+
+#include "hsdramc1.h"
+
+struct hsdramc {
+	const struct device *hebi;
+	void *regs;
+};
+
+static struct hsdramc hsdramc;
+
+unsigned long sdram_init(const struct sdram_info *info)
+{
+	unsigned long *sdram = (unsigned long *)uncached(info->phys_addr);
+	unsigned long sdram_size;
+	unsigned long tmp;
+	unsigned long bus_hz;
+	unsigned int i;
+
+	hsdramc.hebi = get_device(DEVICE_HEBI);
+	if (!hsdramc.hebi)
+		return 0;
+
+	/* FIXME: Both of these lines are complete hacks */
+	hsdramc.regs = hsdramc.hebi->regs + 0x400;
+	bus_hz = pm_get_clock_freq(hsdramc.hebi->resource[0].u.clock.id);
+
+	cpu_enable_sdram();
+
+	tmp = (HSDRAMC1_BF(NC, info->col_bits - 8)
+	       | HSDRAMC1_BF(NR, info->row_bits - 11)
+	       | HSDRAMC1_BF(NB, info->bank_bits - 1)
+	       | HSDRAMC1_BF(CAS, info->cas)
+	       | HSDRAMC1_BF(TWR, info->twr)
+	       | HSDRAMC1_BF(TRC, info->trc)
+	       | HSDRAMC1_BF(TRP, info->trp)
+	       | HSDRAMC1_BF(TRCD, info->trcd)
+	       | HSDRAMC1_BF(TRAS, info->tras)
+	       | HSDRAMC1_BF(TXSR, info->txsr));
+
+#ifdef CFG_SDRAM_16BIT
+	tmp |= HSDRAMC1_BIT(DBW);
+	sdram_size = 1 << (info->row_bits + info->col_bits
+			   + info->bank_bits + 1);
+#else
+	sdram_size = 1 << (info->row_bits + info->col_bits
+			   + info->bank_bits + 2);
+#endif
+
+	hsdramc1_writel(&hsdramc, CR, tmp);
+
+	/*
+	 * Initialization sequence for SDRAM, from the data sheet:
+	 *
+	 * 1. A minimum pause of 200 us is provided to precede any
+	 *    signal toggle.
+	 */
+	udelay(200);
+
+	/*
+	 * 2. A Precharge All command is issued to the SDRAM
+	 */
+	hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_BANKS_PRECHARGE);
+	hsdramc1_readl(&hsdramc, MR);
+	writel(0, sdram);
+
+	/*
+	 * 3. Eight auto-refresh (CBR) cycles are provided
+	 */
+	hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_AUTO_REFRESH);
+	hsdramc1_readl(&hsdramc, MR);
+	for (i = 0; i < 8; i++)
+		writel(0, sdram);
+
+	/*
+	 * 4. A mode register set (MRS) cycle is issued to program
+	 *    SDRAM parameters, in particular CAS latency and burst
+	 *    length.
+	 *
+	 * CAS from info struct, burst length 1, serial burst type
+	 */
+	hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_LOAD_MODE);
+	hsdramc1_readl(&hsdramc, MR);
+	writel(0, sdram + (info->cas << 4));
+
+	/*
+	 * 5. A Normal Mode command is provided, 3 clocks after tMRD
+	 *    is met.
+	 *
+	 * From the timing diagram, it looks like tMRD is 3
+	 * cycles...try a dummy read from the peripheral bus.
+	 */
+	hsdramc1_readl(&hsdramc, MR);
+	hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_NORMAL);
+	hsdramc1_readl(&hsdramc, MR);
+	writel(0, sdram);
+
+	/*
+	 * 6. Write refresh rate into SDRAMC refresh timer count
+	 *    register (refresh rate = timing between refresh cycles).
+	 *
+	 * 15.6 us is a typical value for a burst of length one
+	 */
+	hsdramc1_writel(&hsdramc, TR, (156 * (bus_hz / 1000)) / 10000);
+
+	printf("SDRAM: %u MB at address 0x%08lx\n",
+	       sdram_size >> 20, info->phys_addr);
+
+	printf("Testing SDRAM...");
+	for (i = 0; i < sdram_size / 4; i++)
+		sdram[i] = i;
+
+	for (i = 0; i < sdram_size / 4; i++) {
+		tmp = sdram[i];
+		if (tmp != i) {
+			printf("FAILED at address 0x%08lx\n",
+			       info->phys_addr + i * 4);
+			printf("SDRAM: read 0x%lx, expected 0x%lx\n", tmp, i);
+			return 0;
+		}
+	}
+
+	puts("OK\n");
+
+	return sdram_size;
+}
+
+#endif /* CFG_HSDRAMC */
diff --git a/cpu/at32ap/hsdramc1.h b/cpu/at32ap/hsdramc1.h
new file mode 100644
index 0000000..ce229bc
--- /dev/null
+++ b/cpu/at32ap/hsdramc1.h
@@ -0,0 +1,143 @@
+/*
+ * Register definitions for SDRAM Controller
+ */
+#ifndef __ASM_AVR32_HSDRAMC1_H__
+#define __ASM_AVR32_HSDRAMC1_H__
+
+/* HSDRAMC1 register offsets */
+#define HSDRAMC1_MR				0x0000
+#define HSDRAMC1_TR				0x0004
+#define HSDRAMC1_CR				0x0008
+#define HSDRAMC1_HSR				0x000c
+#define HSDRAMC1_LPR				0x0010
+#define HSDRAMC1_IER				0x0014
+#define HSDRAMC1_IDR				0x0018
+#define HSDRAMC1_IMR				0x001c
+#define HSDRAMC1_ISR				0x0020
+#define HSDRAMC1_MDR				0x0024
+#define HSDRAMC1_VERSION			0x00fc
+
+/* Bitfields in MR */
+#define HSDRAMC1_MODE_OFFSET			0
+#define HSDRAMC1_MODE_SIZE			3
+
+/* Bitfields in TR */
+#define HSDRAMC1_COUNT_OFFSET			0
+#define HSDRAMC1_COUNT_SIZE			12
+
+/* Bitfields in CR */
+#define HSDRAMC1_NC_OFFSET			0
+#define HSDRAMC1_NC_SIZE			2
+#define HSDRAMC1_NR_OFFSET			2
+#define HSDRAMC1_NR_SIZE			2
+#define HSDRAMC1_NB_OFFSET			4
+#define HSDRAMC1_NB_SIZE			1
+#define HSDRAMC1_CAS_OFFSET			5
+#define HSDRAMC1_CAS_SIZE			2
+#define HSDRAMC1_DBW_OFFSET			7
+#define HSDRAMC1_DBW_SIZE			1
+#define HSDRAMC1_TWR_OFFSET			8
+#define HSDRAMC1_TWR_SIZE			4
+#define HSDRAMC1_TRC_OFFSET			12
+#define HSDRAMC1_TRC_SIZE			4
+#define HSDRAMC1_TRP_OFFSET			16
+#define HSDRAMC1_TRP_SIZE			4
+#define HSDRAMC1_TRCD_OFFSET			20
+#define HSDRAMC1_TRCD_SIZE			4
+#define HSDRAMC1_TRAS_OFFSET			24
+#define HSDRAMC1_TRAS_SIZE			4
+#define HSDRAMC1_TXSR_OFFSET			28
+#define HSDRAMC1_TXSR_SIZE			4
+
+/* Bitfields in HSR */
+#define HSDRAMC1_DA_OFFSET			0
+#define HSDRAMC1_DA_SIZE			1
+
+/* Bitfields in LPR */
+#define HSDRAMC1_LPCB_OFFSET			0
+#define HSDRAMC1_LPCB_SIZE			2
+#define HSDRAMC1_PASR_OFFSET			4
+#define HSDRAMC1_PASR_SIZE			3
+#define HSDRAMC1_TCSR_OFFSET			8
+#define HSDRAMC1_TCSR_SIZE			2
+#define HSDRAMC1_DS_OFFSET			10
+#define HSDRAMC1_DS_SIZE			2
+#define HSDRAMC1_TIMEOUT_OFFSET			12
+#define HSDRAMC1_TIMEOUT_SIZE			2
+
+/* Bitfields in IDR */
+#define HSDRAMC1_RES_OFFSET			0
+#define HSDRAMC1_RES_SIZE			1
+
+/* Bitfields in MDR */
+#define HSDRAMC1_MD_OFFSET			0
+#define HSDRAMC1_MD_SIZE			2
+
+/* Bitfields in VERSION */
+#define HSDRAMC1_VERSION_OFFSET			0
+#define HSDRAMC1_VERSION_SIZE			12
+#define HSDRAMC1_MFN_OFFSET			16
+#define HSDRAMC1_MFN_SIZE			3
+
+/* Constants for MODE */
+#define HSDRAMC1_MODE_NORMAL			0
+#define HSDRAMC1_MODE_NOP			1
+#define HSDRAMC1_MODE_BANKS_PRECHARGE		2
+#define HSDRAMC1_MODE_LOAD_MODE			3
+#define HSDRAMC1_MODE_AUTO_REFRESH		4
+#define HSDRAMC1_MODE_EXT_LOAD_MODE		5
+#define HSDRAMC1_MODE_POWER_DOWN		6
+
+/* Constants for NC */
+#define HSDRAMC1_NC_8_COLUMN_BITS		0
+#define HSDRAMC1_NC_9_COLUMN_BITS		1
+#define HSDRAMC1_NC_10_COLUMN_BITS		2
+#define HSDRAMC1_NC_11_COLUMN_BITS		3
+
+/* Constants for NR */
+#define HSDRAMC1_NR_11_ROW_BITS			0
+#define HSDRAMC1_NR_12_ROW_BITS			1
+#define HSDRAMC1_NR_13_ROW_BITS			2
+
+/* Constants for NB */
+#define HSDRAMC1_NB_TWO_BANKS			0
+#define HSDRAMC1_NB_FOUR_BANKS			1
+
+/* Constants for CAS */
+#define HSDRAMC1_CAS_ONE_CYCLE			1
+#define HSDRAMC1_CAS_TWO_CYCLES			2
+
+/* Constants for DBW */
+#define HSDRAMC1_DBW_32_BITS			0
+#define HSDRAMC1_DBW_16_BITS			1
+
+/* Constants for TIMEOUT */
+#define HSDRAMC1_TIMEOUT_AFTER_END		0
+#define HSDRAMC1_TIMEOUT_64_CYC_AFTER_END	1
+#define HSDRAMC1_TIMEOUT_128_CYC_AFTER_END	2
+
+/* Constants for MD */
+#define HSDRAMC1_MD_SDRAM			0
+#define HSDRAMC1_MD_LOW_POWER_SDRAM		1
+
+/* Bit manipulation macros */
+#define HSDRAMC1_BIT(name)					\
+	(1 << HSDRAMC1_##name##_OFFSET)
+#define HSDRAMC1_BF(name,value)					\
+	(((value) & ((1 << HSDRAMC1_##name##_SIZE) - 1))	\
+	 << HSDRAMC1_##name##_OFFSET)
+#define HSDRAMC1_BFEXT(name,value)				\
+	(((value) >> HSDRAMC1_##name##_OFFSET)			\
+	 & ((1 << HSDRAMC1_##name##_SIZE) - 1))
+#define HSDRAMC1_BFINS(name,value,old)				\
+	(((old) & ~(((1 << HSDRAMC1_##name##_SIZE) - 1)		\
+		    << HSDRAMC1_##name##_OFFSET))		\
+	 | HSDRAMC1_BF(name,value))
+
+/* Register access macros */
+#define hsdramc1_readl(port,reg)				\
+	readl((port)->regs + HSDRAMC1_##reg)
+#define hsdramc1_writel(port,reg,value)				\
+	writel((value), (port)->regs + HSDRAMC1_##reg)
+
+#endif /* __ASM_AVR32_HSDRAMC1_H__ */
diff --git a/cpu/at32ap/hsmc3.h b/cpu/at32ap/hsmc3.h
new file mode 100644
index 0000000..ec78cee
--- /dev/null
+++ b/cpu/at32ap/hsmc3.h
@@ -0,0 +1,126 @@
+/*
+ * Register definitions for Static Memory Controller
+ */
+#ifndef __CPU_AT32AP_HSMC3_H__
+#define __CPU_AT32AP_HSMC3_H__
+
+/* HSMC3 register offsets */
+#define HSMC3_SETUP0				0x0000
+#define HSMC3_PULSE0				0x0004
+#define HSMC3_CYCLE0				0x0008
+#define HSMC3_MODE0				0x000c
+#define HSMC3_SETUP1				0x0010
+#define HSMC3_PULSE1				0x0014
+#define HSMC3_CYCLE1				0x0018
+#define HSMC3_MODE1				0x001c
+#define HSMC3_SETUP2				0x0020
+#define HSMC3_PULSE2				0x0024
+#define HSMC3_CYCLE2				0x0028
+#define HSMC3_MODE2				0x002c
+#define HSMC3_SETUP3				0x0030
+#define HSMC3_PULSE3				0x0034
+#define HSMC3_CYCLE3				0x0038
+#define HSMC3_MODE3				0x003c
+#define HSMC3_SETUP4				0x0040
+#define HSMC3_PULSE4				0x0044
+#define HSMC3_CYCLE4				0x0048
+#define HSMC3_MODE4				0x004c
+#define HSMC3_SETUP5				0x0050
+#define HSMC3_PULSE5				0x0054
+#define HSMC3_CYCLE5				0x0058
+#define HSMC3_MODE5				0x005c
+
+/* Bitfields in SETUP0 */
+#define HSMC3_NWE_SETUP_OFFSET			0
+#define HSMC3_NWE_SETUP_SIZE			6
+#define HSMC3_NCS_WR_SETUP_OFFSET		8
+#define HSMC3_NCS_WR_SETUP_SIZE			6
+#define HSMC3_NRD_SETUP_OFFSET			16
+#define HSMC3_NRD_SETUP_SIZE			6
+#define HSMC3_NCS_RD_SETUP_OFFSET		24
+#define HSMC3_NCS_RD_SETUP_SIZE			6
+
+/* Bitfields in PULSE0 */
+#define HSMC3_NWE_PULSE_OFFSET			0
+#define HSMC3_NWE_PULSE_SIZE			7
+#define HSMC3_NCS_WR_PULSE_OFFSET		8
+#define HSMC3_NCS_WR_PULSE_SIZE			7
+#define HSMC3_NRD_PULSE_OFFSET			16
+#define HSMC3_NRD_PULSE_SIZE			7
+#define HSMC3_NCS_RD_PULSE_OFFSET		24
+#define HSMC3_NCS_RD_PULSE_SIZE			7
+
+/* Bitfields in CYCLE0 */
+#define HSMC3_NWE_CYCLE_OFFSET			0
+#define HSMC3_NWE_CYCLE_SIZE			9
+#define HSMC3_NRD_CYCLE_OFFSET			16
+#define HSMC3_NRD_CYCLE_SIZE			9
+
+/* Bitfields in MODE0 */
+#define HSMC3_READ_MODE_OFFSET			0
+#define HSMC3_READ_MODE_SIZE			1
+#define HSMC3_WRITE_MODE_OFFSET			1
+#define HSMC3_WRITE_MODE_SIZE			1
+#define HSMC3_EXNW_MODE_OFFSET			4
+#define HSMC3_EXNW_MODE_SIZE			2
+#define HSMC3_BAT_OFFSET			8
+#define HSMC3_BAT_SIZE				1
+#define HSMC3_DBW_OFFSET			12
+#define HSMC3_DBW_SIZE				2
+#define HSMC3_TDF_CYCLES_OFFSET			16
+#define HSMC3_TDF_CYCLES_SIZE			4
+#define HSMC3_TDF_MODE_OFFSET			20
+#define HSMC3_TDF_MODE_SIZE			1
+#define HSMC3_PMEN_OFFSET			24
+#define HSMC3_PMEN_SIZE				1
+#define HSMC3_PS_OFFSET				28
+#define HSMC3_PS_SIZE				2
+
+/* Bitfields in MODE1 */
+#define HSMC3_PD_OFFSET				28
+#define HSMC3_PD_SIZE				2
+
+/* Constants for READ_MODE */
+#define HSMC3_READ_MODE_NCS_CONTROLLED		0
+#define HSMC3_READ_MODE_NRD_CONTROLLED		1
+
+/* Constants for WRITE_MODE */
+#define HSMC3_WRITE_MODE_NCS_CONTROLLED		0
+#define HSMC3_WRITE_MODE_NWE_CONTROLLED		1
+
+/* Constants for EXNW_MODE */
+#define HSMC3_EXNW_MODE_DISABLED		0
+#define HSMC3_EXNW_MODE_RESERVED		1
+#define HSMC3_EXNW_MODE_FROZEN			2
+#define HSMC3_EXNW_MODE_READY			3
+
+/* Constants for BAT */
+#define HSMC3_BAT_BYTE_SELECT			0
+#define HSMC3_BAT_BYTE_WRITE			1
+
+/* Constants for DBW */
+#define HSMC3_DBW_8_BITS			0
+#define HSMC3_DBW_16_BITS			1
+#define HSMC3_DBW_32_BITS			2
+
+/* Bit manipulation macros */
+#define HSMC3_BIT(name)						\
+	(1 << HSMC3_##name##_OFFSET)
+#define HSMC3_BF(name,value)					\
+	(((value) & ((1 << HSMC3_##name##_SIZE) - 1))		\
+	 << HSMC3_##name##_OFFSET)
+#define HSMC3_BFEXT(name,value)					\
+	(((value) >> HSMC3_##name##_OFFSET)			\
+	 & ((1 << HSMC3_##name##_SIZE) - 1))
+#define HSMC3_BFINS(name,value,old)\
+	(((old) & ~(((1 << HSMC3_##name##_SIZE) - 1)		\
+		    << HSMC3_##name##_OFFSET))			\
+	 | HSMC3_BF(name,value))
+
+/* Register access macros */
+#define hsmc3_readl(port,reg)					\
+	readl((port)->regs + HSMC3_##reg)
+#define hsmc3_writel(port,reg,value)				\
+	writel((value), (port)->regs + HSMC3_##reg)
+
+#endif /* __CPU_AT32AP_HSMC3_H__ */
diff --git a/cpu/at32ap/interrupts.c b/cpu/at32ap/interrupts.c
new file mode 100644
index 0000000..d720cfa
--- /dev/null
+++ b/cpu/at32ap/interrupts.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/div64.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/sysreg.h>
+
+#include <asm/arch/platform.h>
+
+#define HANDLER_MASK	0x00ffffff
+#define INTLEV_SHIFT	30
+#define INTLEV_MASK	0x00000003
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Incremented whenever COUNT reaches 0xffffffff by timer_interrupt_handler */
+volatile unsigned long timer_overflow;
+
+/*
+ * Instead of dividing by get_tbclk(), multiply by this constant and
+ * right-shift the result by 32 bits.
+ */
+static unsigned long tb_factor;
+
+static const struct device *intc_dev;
+
+unsigned long get_tbclk(void)
+{
+	return gd->cpu_hz;
+}
+
+unsigned long long get_ticks(void)
+{
+	unsigned long lo, hi_now, hi_prev;
+
+	do {
+		hi_prev = timer_overflow;
+		lo = sysreg_read(COUNT);
+		hi_now = timer_overflow;
+	} while (hi_prev != hi_now);
+
+	return ((unsigned long long)hi_now << 32) | lo;
+}
+
+void reset_timer(void)
+{
+	sysreg_write(COUNT, 0);
+	cpu_sync_pipeline();	/* process any pending interrupts */
+	timer_overflow = 0;
+}
+
+unsigned long get_timer(unsigned long base)
+{
+	u64 now = get_ticks();
+
+	now *= tb_factor;
+	return (unsigned long)(now >> 32) - base;
+}
+
+void set_timer(unsigned long t)
+{
+	unsigned long long ticks = t;
+	unsigned long lo, hi, hi_new;
+
+	ticks = (ticks * get_tbclk()) / CFG_HZ;
+	hi = ticks >> 32;
+	lo = ticks & 0xffffffffUL;
+
+	do {
+		timer_overflow = hi;
+		sysreg_write(COUNT, lo);
+		hi_new = timer_overflow;
+	} while (hi_new != hi);
+}
+
+/*
+ * For short delays only. It will overflow after a few seconds.
+ */
+void udelay(unsigned long usec)
+{
+	unsigned long now, end;
+
+	now = sysreg_read(COUNT);
+
+	end = ((usec * (get_tbclk() / 10000)) + 50) / 100;
+	end += now;
+
+	while (now > end)
+		now = sysreg_read(COUNT);
+
+	while (now < end)
+		now = sysreg_read(COUNT);
+}
+
+static int set_interrupt_handler(unsigned int nr, void (*handler)(void),
+				 unsigned int priority)
+{
+	unsigned long intpr;
+	unsigned long handler_addr = (unsigned long)handler;
+
+	if ((handler_addr & HANDLER_MASK) != handler_addr
+	    || (priority & INTLEV_MASK) != priority)
+		return -EINVAL;
+
+	intpr = (handler_addr & HANDLER_MASK);
+	intpr |= (priority & INTLEV_MASK) << INTLEV_SHIFT;
+	writel(intpr, intc_dev->regs + 4 * nr);
+
+	return 0;
+}
+
+void timer_init(void)
+{
+	extern void timer_interrupt_handler(void);
+	u64 tmp;
+
+	sysreg_write(COUNT, 0);
+
+	tmp = (u64)CFG_HZ << 32;
+	tmp += gd->cpu_hz / 2;
+	do_div(tmp, gd->cpu_hz);
+	tb_factor = (u32)tmp;
+
+	intc_dev = get_device(DEVICE_INTC);
+
+	if (!intc_dev
+	    || set_interrupt_handler(0, &timer_interrupt_handler, 3))
+		return;
+
+	/* For all practical purposes, this gives us an overflow interrupt */
+	sysreg_write(COMPARE, 0xffffffff);
+}
diff --git a/cpu/at32ap/pio.c b/cpu/at32ap/pio.c
new file mode 100644
index 0000000..8b6c3a3
--- /dev/null
+++ b/cpu/at32ap/pio.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/platform.h>
+
+#include "pio2.h"
+
+struct pio_state {
+	const struct device *dev;
+	u32 alloc_mask;
+};
+
+static struct pio_state pio_state[CFG_NR_PIOS];
+
+int gpio_set_func(enum device_id gpio_devid, unsigned int start,
+		  unsigned int nr_pins, enum gpio_func func)
+{
+	const struct device *gpio;
+	struct pio_state *state;
+	u32 mask;
+
+	state = &pio_state[gpio_devid - DEVICE_PIOA];
+
+	gpio = get_device(gpio_devid);
+	if (!gpio)
+		return -EBUSY;
+
+	state->dev = gpio;
+	mask = ((1 << nr_pins) - 1) << start;
+
+	if (mask & state->alloc_mask) {
+		put_device(gpio);
+		return -EBUSY;
+	}
+	state->alloc_mask |= mask;
+
+	switch (func) {
+	case GPIO_FUNC_GPIO:
+		/* TODO */
+		return -EINVAL;
+	case GPIO_FUNC_A:
+		pio2_writel(gpio, ASR, mask);
+		pio2_writel(gpio, PDR, mask);
+		pio2_writel(gpio, PUDR, mask);
+		break;
+	case GPIO_FUNC_B:
+		pio2_writel(gpio, BSR, mask);
+		pio2_writel(gpio, PDR, mask);
+		pio2_writel(gpio, PUDR, mask);
+		break;
+	}
+
+	return 0;
+}
+
+void gpio_free(enum device_id gpio_devid, unsigned int start,
+	       unsigned int nr_pins)
+{
+	const struct device *gpio;
+	struct pio_state *state;
+	u32 mask;
+
+	state = &pio_state[gpio_devid - DEVICE_PIOA];
+	gpio = state->dev;
+	mask = ((1 << nr_pins) - 1) << start;
+
+	pio2_writel(gpio, ODR, mask);
+	pio2_writel(gpio, PER, mask);
+
+	state->alloc_mask &= ~mask;
+	put_device(gpio);
+}
diff --git a/cpu/at32ap/pio2.h b/cpu/at32ap/pio2.h
new file mode 100644
index 0000000..6b79de3
--- /dev/null
+++ b/cpu/at32ap/pio2.h
@@ -0,0 +1,44 @@
+/*
+ * Register definitions for Parallel Input/Output Controller
+ */
+#ifndef __CPU_AT32AP_PIO2_H__
+#define __CPU_AT32AP_PIO2_H__
+
+/* PIO2 register offsets */
+#define PIO2_PER				0x0000
+#define PIO2_PDR				0x0004
+#define PIO2_PSR				0x0008
+#define PIO2_OER				0x0010
+#define PIO2_ODR				0x0014
+#define PIO2_OSR				0x0018
+#define PIO2_IFER				0x0020
+#define PIO2_IFDR				0x0024
+#define PIO2_ISFR				0x0028
+#define PIO2_SODR				0x0030
+#define PIO2_CODR				0x0034
+#define PIO2_ODSR				0x0038
+#define PIO2_PDSR				0x003c
+#define PIO2_IER				0x0040
+#define PIO2_IDR				0x0044
+#define PIO2_IMR				0x0048
+#define PIO2_ISR				0x004c
+#define PIO2_MDER				0x0050
+#define PIO2_MDDR				0x0054
+#define PIO2_MDSR				0x0058
+#define PIO2_PUDR				0x0060
+#define PIO2_PUER				0x0064
+#define PIO2_PUSR				0x0068
+#define PIO2_ASR				0x0070
+#define PIO2_BSR				0x0074
+#define PIO2_ABSR				0x0078
+#define PIO2_OWER				0x00a0
+#define PIO2_OWDR				0x00a4
+#define PIO2_OWSR				0x00a8
+
+/* Register access macros */
+#define pio2_readl(port,reg)				\
+	readl((port)->regs + PIO2_##reg)
+#define pio2_writel(port,reg,value)			\
+	writel((value), (port)->regs + PIO2_##reg)
+
+#endif /* __CPU_AT32AP_PIO2_H__ */
diff --git a/cpu/at32ap/pm.c b/cpu/at32ap/pm.c
new file mode 100644
index 0000000..01ac325
--- /dev/null
+++ b/cpu/at32ap/pm.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CFG_POWER_MANAGER
+#include <asm/errno.h>
+#include <asm/io.h>
+
+#include <asm/arch/memory-map.h>
+#include <asm/arch/platform.h>
+
+#include "sm.h"
+
+/* Sanity checks */
+#if (CFG_CLKDIV_CPU > CFG_CLKDIV_HSB)		\
+	|| (CFG_CLKDIV_HSB > CFG_CLKDIV_PBA)	\
+	|| (CFG_CLKDIV_HSB > CFG_CLKDIV_PBB)
+# error Constraint fCPU >= fHSB >= fPB{A,B} violated
+#endif
+#if defined(CONFIG_PLL) && ((CFG_PLL0_MUL < 1) || (CFG_PLL0_DIV < 1))
+# error Invalid PLL multiplier and/or divider
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct clock_domain_state {
+	const struct device *bridge;
+	unsigned long freq;
+	u32 mask;
+};
+static struct clock_domain_state ckd_state[NR_CLOCK_DOMAINS];
+
+int pm_enable_clock(enum clock_domain_id id, unsigned int index)
+{
+	const struct clock_domain *ckd = &chip_clock[id];
+	struct clock_domain_state *state = &ckd_state[id];
+
+	if (ckd->bridge != NO_DEVICE) {
+		state->bridge = get_device(ckd->bridge);
+		if (!state->bridge)
+			return -EBUSY;
+	}
+
+	state->mask |= 1 << index;
+	if (gd->sm)
+		writel(state->mask, gd->sm->regs + ckd->reg);
+
+	return 0;
+}
+
+void pm_disable_clock(enum clock_domain_id id, unsigned int index)
+{
+	const struct clock_domain *ckd = &chip_clock[id];
+	struct clock_domain_state *state = &ckd_state[id];
+
+	state->mask &= ~(1 << index);
+	if (gd->sm)
+		writel(state->mask, gd->sm->regs + ckd->reg);
+
+	if (ckd->bridge)
+		put_device(state->bridge);
+}
+
+unsigned long pm_get_clock_freq(enum clock_domain_id domain)
+{
+	return ckd_state[domain].freq;
+}
+
+void pm_init(void)
+{
+	uint32_t cksel = 0;
+	unsigned long main_clock;
+
+	/* Make sure we don't disable any device we're already using */
+	get_device(DEVICE_HRAMC);
+	get_device(DEVICE_HEBI);
+
+	/* Enable the PICO as well */
+	ckd_state[CLOCK_CPU].mask |= 1;
+
+	gd->sm = get_device(DEVICE_SM);
+	if (!gd->sm)
+		panic("Unable to claim system manager device!\n");
+
+	/* Disable any devices that haven't been explicitly claimed */
+	sm_writel(gd->sm, PM_PBB_MASK, ckd_state[CLOCK_PBB].mask);
+	sm_writel(gd->sm, PM_PBA_MASK, ckd_state[CLOCK_PBA].mask);
+	sm_writel(gd->sm, PM_HSB_MASK, ckd_state[CLOCK_HSB].mask);
+	sm_writel(gd->sm, PM_CPU_MASK, ckd_state[CLOCK_CPU].mask);
+
+#ifdef CONFIG_PLL
+	/* Initialize the PLL */
+	main_clock = (CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL;
+
+	sm_writel(gd->sm, PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
+				    | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
+				    | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
+				    | SM_BF(PLLOPT, CFG_PLL0_OPT)
+				    | SM_BF(PLLOSC, 0)
+				    | SM_BIT(PLLEN)));
+
+	/* Wait for lock */
+	while (!(sm_readl(gd->sm, PM_ISR) & SM_BIT(LOCK0))) ;
+#else
+	main_clock = CFG_OSC0_HZ;
+#endif
+
+	/* Set up clocks for the CPU and all peripheral buses */
+	if (CFG_CLKDIV_CPU) {
+		cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
+		ckd_state[CLOCK_CPU].freq = main_clock / (1 << CFG_CLKDIV_CPU);
+	} else {
+		ckd_state[CLOCK_CPU].freq = main_clock;
+	}
+	if (CFG_CLKDIV_HSB) {
+		cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
+		ckd_state[CLOCK_HSB].freq = main_clock / (1 << CFG_CLKDIV_HSB);
+	} else {
+		ckd_state[CLOCK_HSB].freq = main_clock;
+	}
+	if (CFG_CLKDIV_PBA) {
+		cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
+		ckd_state[CLOCK_PBA].freq = main_clock / (1 << CFG_CLKDIV_PBA);
+	} else {
+		ckd_state[CLOCK_PBA].freq = main_clock;
+	}
+	if (CFG_CLKDIV_PBB) {
+		cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
+		ckd_state[CLOCK_PBB].freq = main_clock / (1 << CFG_CLKDIV_PBB);
+	} else {
+		ckd_state[CLOCK_PBB].freq = main_clock;
+	}
+	sm_writel(gd->sm, PM_CKSEL, cksel);
+
+	/* CFG_HZ currently depends on cpu_hz */
+	gd->cpu_hz = ckd_state[CLOCK_CPU].freq;
+
+#ifdef CONFIG_PLL
+	/* Use PLL0 as main clock */
+	sm_writel(gd->sm, PM_MCCTRL, SM_BIT(PLLSEL));
+#endif
+}
+
+#endif /* CFG_POWER_MANAGER */
diff --git a/cpu/at32ap/sm.h b/cpu/at32ap/sm.h
new file mode 100644
index 0000000..ce81ef0
--- /dev/null
+++ b/cpu/at32ap/sm.h
@@ -0,0 +1,204 @@
+/*
+ * Register definitions for System Manager
+ */
+#ifndef __CPU_AT32AP_SM_H__
+#define __CPU_AT32AP_SM_H__
+
+/* SM register offsets */
+#define SM_PM_MCCTRL				0x0000
+#define SM_PM_CKSEL				0x0004
+#define SM_PM_CPU_MASK				0x0008
+#define SM_PM_HSB_MASK				0x000c
+#define SM_PM_PBA_MASK				0x0010
+#define SM_PM_PBB_MASK				0x0014
+#define SM_PM_PLL0				0x0020
+#define SM_PM_PLL1				0x0024
+#define SM_PM_VCTRL				0x0030
+#define SM_PM_VMREF				0x0034
+#define SM_PM_VMV				0x0038
+#define SM_PM_IER				0x0040
+#define SM_PM_IDR				0x0044
+#define SM_PM_IMR				0x0048
+#define SM_PM_ISR				0x004c
+#define SM_PM_ICR				0x0050
+#define SM_PM_GCCTRL				0x0060
+#define SM_RTC_CTRL				0x0080
+#define SM_RTC_VAL				0x0084
+#define SM_RTC_TOP				0x0088
+#define SM_RTC_IER				0x0090
+#define SM_RTC_IDR				0x0094
+#define SM_RTC_IMR				0x0098
+#define SM_RTC_ISR				0x009c
+#define SM_RTC_ICR				0x00a0
+#define SM_WDT_CTRL				0x00b0
+#define SM_WDT_CLR				0x00b4
+#define SM_WDT_EXT				0x00b8
+#define SM_RC_RCAUSE				0x00c0
+#define SM_EIM_IER				0x0100
+#define SM_EIM_IDR				0x0104
+#define SM_EIM_IMR				0x0108
+#define SM_EIM_ISR				0x010c
+#define SM_EIM_ICR				0x0110
+#define SM_EIM_MODE				0x0114
+#define SM_EIM_EDGE				0x0118
+#define SM_EIM_LEVEL				0x011c
+#define SM_EIM_TEST				0x0120
+#define SM_EIM_NMIC				0x0124
+
+/* Bitfields in PM_CKSEL */
+#define SM_CPUSEL_OFFSET			0
+#define SM_CPUSEL_SIZE				3
+#define SM_CPUDIV_OFFSET			7
+#define SM_CPUDIV_SIZE				1
+#define SM_HSBSEL_OFFSET			8
+#define SM_HSBSEL_SIZE				3
+#define SM_HSBDIV_OFFSET			15
+#define SM_HSBDIV_SIZE				1
+#define SM_PBASEL_OFFSET			16
+#define SM_PBASEL_SIZE				3
+#define SM_PBADIV_OFFSET			23
+#define SM_PBADIV_SIZE				1
+#define SM_PBBSEL_OFFSET			24
+#define SM_PBBSEL_SIZE				3
+#define SM_PBBDIV_OFFSET			31
+#define SM_PBBDIV_SIZE				1
+
+/* Bitfields in PM_PLL0 */
+#define SM_PLLEN_OFFSET				0
+#define SM_PLLEN_SIZE				1
+#define SM_PLLOSC_OFFSET			1
+#define SM_PLLOSC_SIZE				1
+#define SM_PLLOPT_OFFSET			2
+#define SM_PLLOPT_SIZE				3
+#define SM_PLLDIV_OFFSET			8
+#define SM_PLLDIV_SIZE				8
+#define SM_PLLMUL_OFFSET			16
+#define SM_PLLMUL_SIZE				8
+#define SM_PLLCOUNT_OFFSET			24
+#define SM_PLLCOUNT_SIZE			6
+#define SM_PLLTEST_OFFSET			31
+#define SM_PLLTEST_SIZE				1
+
+/* Bitfields in PM_VCTRL */
+#define SM_VAUTO_OFFSET				0
+#define SM_VAUTO_SIZE				1
+#define SM_PM_VCTRL_VAL_OFFSET			8
+#define SM_PM_VCTRL_VAL_SIZE			7
+
+/* Bitfields in PM_VMREF */
+#define SM_REFSEL_OFFSET			0
+#define SM_REFSEL_SIZE				4
+
+/* Bitfields in PM_VMV */
+#define SM_PM_VMV_VAL_OFFSET			0
+#define SM_PM_VMV_VAL_SIZE			8
+
+/* Bitfields in PM_ICR */
+#define SM_LOCK0_OFFSET				0
+#define SM_LOCK0_SIZE				1
+#define SM_LOCK1_OFFSET				1
+#define SM_LOCK1_SIZE				1
+#define SM_WAKE_OFFSET				2
+#define SM_WAKE_SIZE				1
+#define SM_VOK_OFFSET				3
+#define SM_VOK_SIZE				1
+#define SM_VMRDY_OFFSET				4
+#define SM_VMRDY_SIZE				1
+#define SM_CKRDY_OFFSET				5
+#define SM_CKRDY_SIZE				1
+
+/* Bitfields in PM_GCCTRL */
+#define SM_OSCSEL_OFFSET			0
+#define SM_OSCSEL_SIZE				1
+#define SM_PLLSEL_OFFSET			1
+#define SM_PLLSEL_SIZE				1
+#define SM_CEN_OFFSET				2
+#define SM_CEN_SIZE				1
+#define SM_CPC_OFFSET				3
+#define SM_CPC_SIZE				1
+#define SM_DIVEN_OFFSET				4
+#define SM_DIVEN_SIZE				1
+#define SM_DIV_OFFSET				8
+#define SM_DIV_SIZE				8
+
+/* Bitfields in RTC_CTRL */
+#define SM_PCLR_OFFSET				1
+#define SM_PCLR_SIZE				1
+#define SM_TOPEN_OFFSET				2
+#define SM_TOPEN_SIZE				1
+#define SM_CLKEN_OFFSET				3
+#define SM_CLKEN_SIZE				1
+#define SM_PSEL_OFFSET				8
+#define SM_PSEL_SIZE				16
+
+/* Bitfields in RTC_VAL */
+#define SM_RTC_VAL_VAL_OFFSET			0
+#define SM_RTC_VAL_VAL_SIZE			31
+
+/* Bitfields in RTC_TOP */
+#define SM_RTC_TOP_VAL_OFFSET			0
+#define SM_RTC_TOP_VAL_SIZE			32
+
+/* Bitfields in RTC_ICR */
+#define SM_TOPI_OFFSET				0
+#define SM_TOPI_SIZE				1
+
+/* Bitfields in WDT_CTRL */
+#define SM_KEY_OFFSET				24
+#define SM_KEY_SIZE				8
+
+/* Bitfields in RC_RCAUSE */
+#define SM_POR_OFFSET				0
+#define SM_POR_SIZE				1
+#define SM_BOD_OFFSET				1
+#define SM_BOD_SIZE				1
+#define SM_EXT_OFFSET				2
+#define SM_EXT_SIZE				1
+#define SM_WDT_OFFSET				3
+#define SM_WDT_SIZE				1
+#define SM_NTAE_OFFSET				4
+#define SM_NTAE_SIZE				1
+#define SM_SERP_OFFSET				5
+#define SM_SERP_SIZE				1
+
+/* Bitfields in EIM_EDGE */
+#define SM_INT0_OFFSET				0
+#define SM_INT0_SIZE				1
+#define SM_INT1_OFFSET				1
+#define SM_INT1_SIZE				1
+#define SM_INT2_OFFSET				2
+#define SM_INT2_SIZE				1
+#define SM_INT3_OFFSET				3
+#define SM_INT3_SIZE				1
+
+/* Bitfields in EIM_LEVEL */
+
+/* Bitfields in EIM_TEST */
+#define SM_TESTEN_OFFSET			31
+#define SM_TESTEN_SIZE				1
+
+/* Bitfields in EIM_NMIC */
+#define SM_EN_OFFSET				0
+#define SM_EN_SIZE				1
+
+/* Bit manipulation macros */
+#define SM_BIT(name)					\
+	(1 << SM_##name##_OFFSET)
+#define SM_BF(name,value)				\
+	(((value) & ((1 << SM_##name##_SIZE) - 1))	\
+	 << SM_##name##_OFFSET)
+#define SM_BFEXT(name,value)				\
+	(((value) >> SM_##name##_OFFSET)		\
+	 & ((1 << SM_##name##_SIZE) - 1))
+#define SM_BFINS(name,value,old)			\
+	(((old) & ~(((1 << SM_##name##_SIZE) - 1)	\
+		    << SM_##name##_OFFSET))		\
+	 | SM_BF(name,value))
+
+/* Register access macros */
+#define sm_readl(port,reg)				\
+	readl((port)->regs + SM_##reg)
+#define sm_writel(port,reg,value)			\
+	writel((value), (port)->regs + SM_##reg)
+
+#endif /* __CPU_AT32AP_SM_H__ */
diff --git a/cpu/at32ap/start.S b/cpu/at32ap/start.S
new file mode 100644
index 0000000..79ee33b
--- /dev/null
+++ b/cpu/at32ap/start.S
@@ -0,0 +1,113 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <asm/sysreg.h>
+
+#ifndef PART_SPECIFIC_BOOTSTRAP
+# define PART_SPECIFIC_BOOTSTRAP
+#endif
+
+#define SYSREG_MMUCR_I_OFFSET	2
+#define SYSREG_MMUCR_S_OFFSET	4
+
+#define SR_INIT (SYSREG_BIT(GM) | SYSREG_BIT(EM) | SYSREG_BIT(M0))
+#define CPUCR_INIT (SYSREG_BIT(BI) | SYSREG_BIT(BE)		\
+		    | SYSREG_BIT(FE) | SYSREG_BIT(RE)		\
+		    | SYSREG_BIT(IBE) | SYSREG_BIT(IEE))
+
+	.text
+	.global	_start
+_start:
+	PART_SPECIFIC_BOOTSTRAP
+
+	/* Reset the Status Register */
+	mov	r0, lo(SR_INIT)
+	orh	r0, hi(SR_INIT)
+	mtsr	SYSREG_SR, r0
+
+	/* Reset CPUCR and invalidate the BTB */
+	mov	r2, CPUCR_INIT
+	mtsr	SYSREG_CPUCR, r2
+
+	/* Flush the caches */
+	mov	r1, 0
+	cache	r1[4], 8
+	cache	r1[0], 0
+	sync	0
+
+	/* Reset the MMU to default settings */
+	mov	r0, SYSREG_BIT(MMUCR_S) | SYSREG_BIT(MMUCR_I)
+	mtsr	SYSREG_MMUCR, r0
+
+	/* Internal RAM should not need any initialization.  We might
+	   have to initialize external RAM here if the part doesn't
+	   have internal RAM (or we may use the data cache) */
+
+	/* Jump to cacheable segment */
+	lddpc	pc, 1f
+
+	.align	2
+1:	.long	2f
+
+2:	lddpc	sp, sp_init
+
+	/*
+	 * Relocate the data section and initialize .bss.  Everything
+	 * is guaranteed to be at least doubleword aligned by the
+	 * linker script.
+	 */
+	lddpc	r12, .Ldata_vma
+	lddpc	r11, .Ldata_lma
+	lddpc	r10, .Ldata_end
+	sub	r10, r12
+4:	ld.d	r8, r11++
+	sub	r10, 8
+	st.d	r12++, r8
+	brne	4b
+
+	mov	r8, 0
+	mov	r9, 0
+	lddpc	r10, .Lbss_end
+	sub	r10, r12
+4:	sub	r10, 8
+	st.d	r12++, r8
+	brne	4b
+
+	/* Initialize the GOT pointer */
+	lddpc	r6, got_init
+3:	rsub	r6, pc
+	ld.w	pc, r6[start_u_boot@got]
+
+	.align	2
+	.type	sp_init,@object
+sp_init:
+	.long	CFG_INIT_SP_ADDR
+got_init:
+	.long	3b - _GLOBAL_OFFSET_TABLE_
+.Ldata_lma:
+	.long	__data_lma
+.Ldata_vma:
+	.long	_data
+.Ldata_end:
+	.long	_edata
+.Lbss_end:
+	.long	_end
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 19737ce..37fe3e7 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -882,7 +882,7 @@
     defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0)	|| \
     defined(CONFIG_MCC200)  || defined(CONFIG_O2DNT)	|| \
     defined(CONFIG_PM520)   || defined(CONFIG_TOP5200)	|| \
-    defined(CONFIG_TQM5200)
+    defined(CONFIG_TQM5200) || defined(CONFIG_V38B)
 # ifndef CONFIG_FEC_10MBIT
 	fec->xcv_type = MII100;
 # else
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index 7b32305..ff67dcd 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -30,7 +30,7 @@
 
 START	= start.o resetvec.o
 COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
-	  pci.o serial_scc.o commproc.o ether_fcc.o i2c.o spd_sdram.o
+	  pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index f7fe22e..0507c47 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -30,7 +30,10 @@
 #include <command.h>
 #include <asm/cache.h>
 
-/* ------------------------------------------------------------------------- */
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
 
 int checkcpu (void)
 {
@@ -227,3 +230,48 @@
 	return dma_check();
 }
 #endif
+
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_cpu_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	ulong clock;
+	int len;
+
+	clock = bd->bi_busfreq;
+	p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
+	if (p != NULL)
+		*p = cpu_to_be32(clock);
+
+	p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
+	if (p != NULL)
+		*p = cpu_to_be32(clock);
+
+	p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len);
+	if (p != NULL)
+		*p = cpu_to_be32(clock);
+
+#if defined(CONFIG_MPC85XX_TSEC1)
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
+		memcpy(p, bd->bi_enetaddr, 6);
+#endif
+
+#if defined(CONFIG_HAS_ETH1)
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
+		memcpy(p, bd->bi_enet1addr, 6);
+#endif
+
+#if defined(CONFIG_HAS_ETH2)
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
+		memcpy(p, bd->bi_enet2addr, 6);
+#endif
+
+#if defined(CONFIG_HAS_ETH3)
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
+		memcpy(p, bd->bi_enet3addr, 6);
+#endif
+
+}
+#endif
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index c12b47b..9f4d36c 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -32,6 +32,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+
 #ifdef CONFIG_CPM2
 static void config_8560_ioports (volatile immap_t * immr)
 {
diff --git a/cpu/mpc85xx/i2c.c b/cpu/mpc85xx/i2c.c
deleted file mode 100644
index 32dcf5d..0000000
--- a/cpu/mpc85xx/i2c.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * (C) Copyright 2003,Motorola Inc.
- * Xianghua Xiao <x.xiao@motorola.com>
- * Adapted for Motorola 85xx chip.
- *
- * (C) Copyright 2003
- * Gleb Natapov <gnatapov@mrv.com>
- * Some bits are taken from linux driver writen by adrian@humboldt.co.uk
- *
- * Hardware I2C driver for MPC107 PCI bridge.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_HARD_I2C
-#include <i2c.h>
-
-#define TIMEOUT (CFG_HZ/4)
-
-#define I2C_Addr ((u8 *)(CFG_CCSRBAR + 0x3000))
-
-#define I2CADR  &I2C_Addr[0]
-#define I2CFDR  &I2C_Addr[4]
-#define I2CCCR  &I2C_Addr[8]
-#define I2CCSR  &I2C_Addr[12]
-#define I2CCDR  &I2C_Addr[16]
-#define I2CDFSRR &I2C_Addr[20]
-
-#define I2C_READ  1
-#define I2C_WRITE 0
-
-void
-i2c_init(int speed, int slaveadd)
-{
-	/* stop I2C controller */
-	writeb(0x0, I2CCCR);
-
-	/* set clock */
-	writeb(0x3f, I2CFDR);
-
-	/* set default filter */
-	writeb(0x10,I2CDFSRR);
-
-	/* write slave address */
-	writeb(slaveadd, I2CADR);
-
-	/* clear status register */
-	writeb(0x0, I2CCSR);
-
-	/* start I2C controller */
-	writeb(MPC85xx_I2CCR_MEN, I2CCCR);
-}
-
-static __inline__ int
-i2c_wait4bus (void)
-{
-	ulong timeval = get_timer (0);
-
-	while (readb(I2CCSR) & MPC85xx_I2CSR_MBB) {
-		if (get_timer (timeval) > TIMEOUT) {
-			return -1;
-		}
-	}
-
-  return 0;
-}
-
-static __inline__ int
-i2c_wait (int write)
-{
-	u32 csr;
-	ulong timeval = get_timer (0);
-
-	do {
-		csr = readb(I2CCSR);
-
-		if (!(csr & MPC85xx_I2CSR_MIF))
-			continue;
-
-		writeb(0x0, I2CCSR);
-
-		if (csr & MPC85xx_I2CSR_MAL) {
-			debug("i2c_wait: MAL\n");
-			return -1;
-		}
-
-		if (!(csr & MPC85xx_I2CSR_MCF))	{
-			debug("i2c_wait: unfinished\n");
-			return -1;
-		}
-
-		if (write == I2C_WRITE && (csr & MPC85xx_I2CSR_RXAK)) {
-			debug("i2c_wait: No RXACK\n");
-			return -1;
-		}
-
-		return 0;
-	} while (get_timer (timeval) < TIMEOUT);
-
-	debug("i2c_wait: timed out\n");
-	return -1;
-}
-
-static __inline__ int
-i2c_write_addr (u8 dev, u8 dir, int rsta)
-{
-	writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_MSTA | MPC85xx_I2CCR_MTX |
-	       (rsta?MPC85xx_I2CCR_RSTA:0),
-	       I2CCCR);
-
-	writeb((dev << 1) | dir, I2CCDR);
-
-	if (i2c_wait (I2C_WRITE) < 0)
-		return 0;
-
-	return 1;
-}
-
-static __inline__ int
-__i2c_write (u8 *data, int length)
-{
-	int i;
-
-	writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_MSTA | MPC85xx_I2CCR_MTX,
-	       I2CCCR);
-
-	for (i=0; i < length; i++) {
-		writeb(data[i], I2CCDR);
-
-		if (i2c_wait (I2C_WRITE) < 0)
-			break;
-	}
-
-	return i;
-}
-
-static __inline__ int
-__i2c_read (u8 *data, int length)
-{
-	int i;
-
-	writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_MSTA |
-	       ((length == 1) ? MPC85xx_I2CCR_TXAK : 0),
-	       I2CCCR);
-
-	/* dummy read */
-	readb(I2CCDR);
-
-	for (i=0; i < length; i++) {
-		if (i2c_wait (I2C_READ) < 0)
-			break;
-
-		/* Generate ack on last next to last byte */
-		if (i == length - 2)
-			writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_MSTA |
-			       MPC85xx_I2CCR_TXAK,
-			       I2CCCR);
-
-		/* Generate stop on last byte */
-		if (i == length - 1)
-			writeb(MPC85xx_I2CCR_MEN | MPC85xx_I2CCR_TXAK, I2CCCR);
-
-		data[i] = readb(I2CCDR);
-	}
-
-	return i;
-}
-
-int
-i2c_read (u8 dev, uint addr, int alen, u8 *data, int length)
-{
-	int i = 0;
-	u8 *a = (u8*)&addr;
-
-	if (i2c_wait4bus () < 0)
-		goto exit;
-
-	if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
-		goto exit;
-
-	if (__i2c_write (&a[4 - alen], alen) != alen)
-		goto exit;
-
-	if (i2c_write_addr (dev, I2C_READ, 1) == 0)
-		goto exit;
-
-	i = __i2c_read (data, length);
-
- exit:
-	writeb(MPC85xx_I2CCR_MEN, I2CCCR);
-
-	return !(i == length);
-}
-
-int
-i2c_write (u8 dev, uint addr, int alen, u8 *data, int length)
-{
-	int i = 0;
-	u8 *a = (u8*)&addr;
-
-	if (i2c_wait4bus () < 0)
-		goto exit;
-
-	if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
-		goto exit;
-
-	if (__i2c_write (&a[4 - alen], alen) != alen)
-		goto exit;
-
-	i = __i2c_write (data, length);
-
- exit:
-	writeb(MPC85xx_I2CCR_MEN, I2CCCR);
-
-	return !(i == length);
-}
-
-int i2c_probe (uchar chip)
-{
-	int tmp;
-
-	/*
-	 * Try to read the first location of the chip.  The underlying
-	 * driver doesn't appear to support sending just the chip address
-	 * and looking for an <ACK> back.
-	 */
-	udelay(10000);
-	return i2c_read (chip, 0, 1, (uchar *)&tmp, 1);
-}
-
-uchar i2c_reg_read (uchar i2c_addr, uchar reg)
-{
-	uchar buf[1];
-
-	i2c_read (i2c_addr, reg, 1, buf, 1);
-
-	return (buf[0]);
-}
-
-void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
-{
-	i2c_write (i2c_addr, reg, 1, &val, 1);
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index a94493e..84f839a 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -29,20 +29,86 @@
 #include <asm/cpm_85xx.h>
 #include <pci.h>
 
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
 
 #if defined(CONFIG_PCI)
 
+static struct pci_controller *pci_hose;
+
 void
-pci_mpc85xx_init(struct pci_controller *hose)
+pci_mpc85xx_init(struct pci_controller *board_hose)
 {
+	u16 reg16;
+	u32 dev;
+
 	volatile immap_t    *immap = (immap_t *)CFG_CCSRBAR;
 	volatile ccsr_pcix_t *pcix = &immap->im_pcix;
+#ifdef CONFIG_MPC85XX_PCI2
+	volatile ccsr_pcix_t *pcix2 = &immap->im_pcix2;
+#endif
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	struct pci_controller * hose;
 
-	u16 reg16;
+	pci_hose = board_hose;
+
+	hose = &pci_hose[0];
 
 	hose->first_busno = 0;
 	hose->last_busno = 0xff;
 
+	pci_setup_indirect(hose,
+			   (CFG_IMMR+0x8000),
+			   (CFG_IMMR+0x8004));
+
+	/*
+	 * Hose scan.
+	 */
+	dev = PCI_BDF(hose->first_busno, 0, 0);
+	pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+
+	if (!(gur->pordevsr & PORDEVSR_PCI)) {
+		/* PCI-X init */
+		if (CONFIG_SYS_CLK_FREQ < 66000000)
+			printf("PCI-X will only work at 66 MHz\n");
+
+		reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
+			| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
+		pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
+	}
+
+	pcix->potar1   = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
+	pcix->potear1  = 0x00000000;
+	pcix->powbar1  = (CFG_PCI1_MEM_PHYS >> 12) & 0x000fffff;
+	pcix->powbear1 = 0x00000000;
+	pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
+			POWAR_MEM_WRITE | POWAR_MEM_512M);
+
+	pcix->potar2  = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
+	pcix->potear2  = 0x00000000;
+	pcix->powbar2  = (CFG_PCI1_IO_PHYS >> 12) & 0x000fffff;
+	pcix->powbear2 = 0x00000000;
+	pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
+			POWAR_IO_WRITE | POWAR_IO_1M);
+
+	pcix->pitar1 = 0x00000000;
+	pcix->piwbar1 = 0x00000000;
+	pcix->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
+			PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
+
+	pcix->powar3 = 0;
+	pcix->powar4 = 0;
+	pcix->piwar2 = 0;
+	pcix->piwar3 = 0;
+
 	pci_set_region(hose->regions + 0,
 		       CFG_PCI1_MEM_BASE,
 		       CFG_PCI1_MEM_PHYS,
@@ -57,42 +123,8 @@
 
 	hose->region_count = 2;
 
-	pci_setup_indirect(hose,
-			   (CFG_IMMR+0x8000),
-			   (CFG_IMMR+0x8004));
-
-	pcix->potar1   = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
-	pcix->potear1  = 0x00000000;
-	pcix->powbar1  = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
-	pcix->powbear1 = 0x00000000;
-	pcix->powar1   = 0x8004401c;	/* 512M MEM space */
-
-	pcix->potar2   = 0x00000000;
-	pcix->potear2  = 0x00000000;
-	pcix->powbar2  = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
-	pcix->powbear2 = 0x00000000;
-	pcix->powar2   = 0x80088017;	/* 16M IO space */
-
-	pcix->pitar1 = 0x00000000;
-	pcix->piwbar1 = 0x00000000;
-	pcix->piwar1 = 0xa0f5501e;	/* Enable, Prefetch, Local Mem,
-					 * Snoop R/W, 2G */
-
-	/*
-	 * Hose scan.
-	 */
 	pci_register_hose(hose);
 
-	pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, &reg16);
-	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);
-
-	/*
-	 * Clear non-reserved bits in status register.
-	 */
-	pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
-	pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80);
-
 #if defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8541CDS)
 	/*
 	 * This is a SW workaround for an apparent HW problem
@@ -117,6 +149,94 @@
 #endif
 
 	hose->last_busno = pci_hose_scan(hose);
+
+#ifdef CONFIG_MPC85XX_PCI2
+	hose = &pci_hose[1];
+
+	hose->first_busno = pci_hose[0].last_busno + 1;
+	hose->last_busno = 0xff;
+
+	pci_setup_indirect(hose,
+			   (CFG_IMMR+0x9000),
+			   (CFG_IMMR+0x9004));
+
+	dev = PCI_BDF(hose->first_busno, 0, 0);
+	pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+
+	pcix2->potar1   = (CFG_PCI2_MEM_BASE >> 12) & 0x000fffff;
+	pcix2->potear1  = 0x00000000;
+	pcix2->powbar1  = (CFG_PCI2_MEM_PHYS >> 12) & 0x000fffff;
+	pcix2->powbear1 = 0x00000000;
+	pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
+			POWAR_MEM_WRITE | POWAR_MEM_512M);
+
+	pcix2->potar2  = (CFG_PCI2_IO_BASE >> 12) & 0x000fffff;
+	pcix2->potear2  = 0x00000000;
+	pcix2->powbar2  = (CFG_PCI2_IO_PHYS >> 12) & 0x000fffff;
+	pcix2->powbear2 = 0x00000000;
+	pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
+			POWAR_IO_WRITE | POWAR_IO_1M);
+
+	pcix2->pitar1 = 0x00000000;
+	pcix2->piwbar1 = 0x00000000;
+	pcix2->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
+			PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
+
+	pcix2->powar3 = 0;
+	pcix2->powar4 = 0;
+	pcix2->piwar2 = 0;
+	pcix2->piwar3 = 0;
+
+	pci_set_region(hose->regions + 0,
+		       CFG_PCI2_MEM_BASE,
+		       CFG_PCI2_MEM_PHYS,
+		       CFG_PCI2_MEM_SIZE,
+		       PCI_REGION_MEM);
+
+	pci_set_region(hose->regions + 1,
+		       CFG_PCI2_IO_BASE,
+		       CFG_PCI2_IO_PHYS,
+		       CFG_PCI2_IO_SIZE,
+		       PCI_REGION_IO);
+
+	hose->region_count = 2;
+
+	/*
+	 * Hose scan.
+	 */
+	pci_register_hose(hose);
+
+	hose->last_busno = pci_hose_scan(hose);
+#endif
 }
 
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = pci_hose[0].first_busno;
+		p[1] = pci_hose[0].last_busno;
+	}
+
+#ifdef CONFIG_MPC85XX_PCI2
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@9000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = pci_hose[1].first_busno;
+		p[1] = pci_hose[1].last_busno;
+	}
+#endif
+}
+#endif /* CONFIG_OF_FLAT_TREE */
 #endif /* CONFIG_PCI */
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index af99282..6da5367 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -131,8 +131,8 @@
 		800,
 		900,
 		250,
-		330,	/* FIXME: Is 333 better/valid? */
-		660,	/* FIXME: Is 667 better/valid? */
+		330,
+		660,
 		750,
 		0,	/* undefined */
 		0	/* undefined */
@@ -146,6 +146,28 @@
 }
 
 
+/*
+ * Determine Refresh Rate.  Ignore self refresh bit on DDR I.
+ * Table from SPD Spec, Byte 12, converted to picoseconds and
+ * filled in with "default" normal values.
+ */
+unsigned int determine_refresh_rate(unsigned int spd_refresh)
+{
+	unsigned int refresh_time_ns[8] = {
+		15625000,	/* 0 Normal    1.00x */
+		3900000,	/* 1 Reduced    .25x */
+		7800000,	/* 2 Extended   .50x */
+		31300000,	/* 3 Extended  2.00x */
+		62500000,	/* 4 Extended  4.00x */
+		125000000,	/* 5 Extended  8.00x */
+		15625000,	/* 6 Normal    1.00x  filler */
+		15625000,	/* 7 Normal    1.00x  filler */
+	};
+
+	return picos_to_clk(refresh_time_ns[spd_refresh & 0x7]);
+}
+
+
 long int
 spd_sdram(void)
 {
@@ -157,6 +179,10 @@
 	unsigned int rank_density;
 	unsigned int odt_rd_cfg, odt_wr_cfg;
 	unsigned int odt_cfg, mode_odt_enable;
+	unsigned int refresh_clk;
+#ifdef MPC85xx_DDR_SDRAM_CLK_CNTL
+	unsigned char clk_adjust;
+#endif
 	unsigned int dqs_cfg;
 	unsigned char twr_clk, twtr_clk, twr_auto_clk;
 	unsigned int tCKmin_ps, tCKmax_ps;
@@ -740,38 +766,21 @@
 	ddr->sdram_mode_2 = 0;
 	debug("DDR: sdram_mode_2 = 0x%08x\n", ddr->sdram_mode_2);
 
+	/*
+	 * Determine Refresh Rate.
+	 */
+	refresh_clk = determine_refresh_rate(spd.refresh & 0x7);
 
 	/*
-	 * Determine Refresh Rate.  Ignore self refresh bit on DDR I.
-	 * Table from SPD Spec, Byte 12, converted to picoseconds and
-	 * filled in with "default" normal values.
+	 * Set BSTOPRE to 0x100 for page mode
+	 * If auto-charge is used, set BSTOPRE = 0
 	 */
-	{
-		unsigned int refresh_clk;
-		unsigned int refresh_time_ns[8] = {
-			15625000,	/* 0 Normal    1.00x */
-			3900000,	/* 1 Reduced    .25x */
-			7800000,	/* 2 Extended   .50x */
-			31300000,	/* 3 Extended  2.00x */
-			62500000,	/* 4 Extended  4.00x */
-			125000000,	/* 5 Extended  8.00x */
-			15625000,	/* 6 Normal    1.00x  filler */
-			15625000,	/* 7 Normal    1.00x  filler */
-		};
-
-		refresh_clk = picos_to_clk(refresh_time_ns[spd.refresh & 0x7]);
-
-		/*
-		 * Set BSTOPRE to 0x100 for page mode
-		 * If auto-charge is used, set BSTOPRE = 0
-		 */
-		ddr->sdram_interval =
-			(0
-			 | (refresh_clk & 0x3fff) << 16
-			 | 0x100
-			 );
-		debug("DDR: sdram_interval = 0x%08x\n", ddr->sdram_interval);
-	}
+	ddr->sdram_interval =
+	    (0
+	     | (refresh_clk & 0x3fff) << 16
+	     | 0x100
+	     );
+	debug("DDR: sdram_interval = 0x%08x\n", ddr->sdram_interval);
 
 	/*
 	 * Is this an ECC DDR chip?
@@ -835,28 +844,23 @@
 
 
 #ifdef MPC85xx_DDR_SDRAM_CLK_CNTL
-	{
-		unsigned char clk_adjust;
+	/*
+	 * Setup the clock control.
+	 * SDRAM_CLK_CNTL[0] = Source synchronous enable == 1
+	 * SDRAM_CLK_CNTL[5-7] = Clock Adjust
+	 *	0110	3/4 cycle late
+	 *	0111	7/8 cycle late
+	 */
+	if (spd.mem_type == SPD_MEMTYPE_DDR)
+		clk_adjust = 0x6;
+	else
+		clk_adjust = 0x7;
 
-		/*
-		 * Setup the clock control.
-		 * SDRAM_CLK_CNTL[0] = Source synchronous enable == 1
-		 * SDRAM_CLK_CNTL[5-7] = Clock Adjust
-		 *	0110	3/4 cycle late
-		 *	0111	7/8 cycle late
-		 */
-		if (spd.mem_type == SPD_MEMTYPE_DDR) {
-			clk_adjust = 0x6;
-		} else {
-			clk_adjust = 0x7;
-		}
-
-		ddr->sdram_clk_cntl = (0
+	ddr->sdram_clk_cntl = (0
 			       | 0x80000000
 			       | (clk_adjust << 23)
 			       );
-		debug("DDR: sdram_clk_cntl = 0x%08x\n", ddr->sdram_clk_cntl);
-	}
+	debug("DDR: sdram_clk_cntl = 0x%08x\n", ddr->sdram_clk_cntl);
 #endif
 
 	/*
@@ -1081,26 +1085,16 @@
 		}
 	}
 
-	/* 8K */
-	dma_xfer((uint *)0x2000, 0x2000, (uint *)0);
-	/* 16K */
-	dma_xfer((uint *)0x4000, 0x4000, (uint *)0);
-	/* 32K */
-	dma_xfer((uint *)0x8000, 0x8000, (uint *)0);
-	/* 64K */
-	dma_xfer((uint *)0x10000, 0x10000, (uint *)0);
-	/* 128k */
-	dma_xfer((uint *)0x20000, 0x20000, (uint *)0);
-	/* 256k */
-	dma_xfer((uint *)0x40000, 0x40000, (uint *)0);
-	/* 512k */
-	dma_xfer((uint *)0x80000, 0x80000, (uint *)0);
-	/* 1M */
-	dma_xfer((uint *)0x100000, 0x100000, (uint *)0);
-	/* 2M */
-	dma_xfer((uint *)0x200000, 0x200000, (uint *)0);
-	/* 4M */
-	dma_xfer((uint *)0x400000, 0x400000, (uint *)0);
+	dma_xfer((uint *)0x002000, 0x002000, (uint *)0); /* 8K */
+	dma_xfer((uint *)0x004000, 0x004000, (uint *)0); /* 16K */
+	dma_xfer((uint *)0x008000, 0x008000, (uint *)0); /* 32K */
+	dma_xfer((uint *)0x010000, 0x010000, (uint *)0); /* 64K */
+	dma_xfer((uint *)0x020000, 0x020000, (uint *)0); /* 128k */
+	dma_xfer((uint *)0x040000, 0x040000, (uint *)0); /* 256k */
+	dma_xfer((uint *)0x080000, 0x080000, (uint *)0); /* 512k */
+	dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */
+	dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */
+	dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */
 
 	for (i = 1; i < dram_size / 0x800000; i++) {
 		dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0);
diff --git a/cpu/mpc86xx/Makefile b/cpu/mpc86xx/Makefile
new file mode 100644
index 0000000..de5561e
--- /dev/null
+++ b/cpu/mpc86xx/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2002,2003 Motorola Inc.
+# Xianghua Xiao,X.Xiao@motorola.com
+#
+# (C) Copyright 2004 Freescale Semiconductor. (MC86xx Port)
+# Jeff Brown
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(CPU).a
+
+START	= start.o #resetvec.o
+SOBJS	= cache.o
+COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
+	  pci.o pcie_indirect.o spd_sdram.o
+
+SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+START	:= $(addprefix $(obj),$(START))
+
+all:	$(obj).depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) crv $@ $(ASOBJS) $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/mpc86xx/cache.S b/cpu/mpc86xx/cache.S
new file mode 100644
index 0000000..f316b3e
--- /dev/null
+++ b/cpu/mpc86xx/cache.S
@@ -0,0 +1,374 @@
+#include <config.h>
+#include <mpc86xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CACHE_LINE_SIZE
+# define CACHE_LINE_SIZE L1_CACHE_BYTES
+#endif
+
+#if CACHE_LINE_SIZE == 128
+#define LG_CACHE_LINE_SIZE 7
+#elif CACHE_LINE_SIZE == 32
+#define LG_CACHE_LINE_SIZE 5
+#elif CACHE_LINE_SIZE == 16
+#define LG_CACHE_LINE_SIZE 4
+#elif CACHE_LINE_SIZE == 8
+#define LG_CACHE_LINE_SIZE 3
+#else
+# error "Invalid cache line size!"
+#endif
+
+/*
+ * Most of this code is taken from 74xx_7xx/cache.S
+ * and then cleaned up a bit
+ */
+
+/*
+ * Invalidate L1 instruction cache.
+ */
+_GLOBAL(invalidate_l1_instruction_cache)
+	/* use invalidate-all bit in HID0 */
+	mfspr	r3,HID0
+	ori	r3,r3,HID0_ICFI
+	mtspr	HID0,r3
+	isync
+	blr
+
+/*
+ * Invalidate L1 data cache.
+ */
+_GLOBAL(invalidate_l1_data_cache)
+	mfspr	r3,HID0
+	ori	r3,r3,HID0_DCFI
+	mtspr	HID0,r3
+	isync
+	blr
+
+/*
+ * Flush data cache.
+ */
+_GLOBAL(flush_data_cache)
+	lis	r3,0
+	lis	r5,CACHE_LINE_SIZE
+flush:
+	cmp	0,1,r3,r5
+	bge	done
+	lwz	r5,0(r3)
+	lis	r5,CACHE_LINE_SIZE
+	addi	r3,r3,0x4
+	b	flush
+done:
+	blr
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ * This is a no-op on the 601.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_icache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+	mr	r6,r3
+1:	dcbst	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	mtctr	r4
+2:	icbi	0,r6
+	addi	r6,r6,CACHE_LINE_SIZE
+	bdnz	2b
+	sync				/* additional sync needed on g4 */
+	isync
+	blr
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ *
+ * clean_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(clean_dcache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5	/* align r3 down to cache line */
+	subf	r4,r3,r4	/* r4 = offset of stop from start of cache line */
+	add	r4,r4,r5	/* r4 += cache_line_size-1 */
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE  /* r4 = number of cache lines to flush */
+	beqlr				  /* if r4 == 0 return */
+	mtctr	r4			  /* ctr = r4 */
+
+	sync
+1:	dcbst	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	blr
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_dcache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+	sync
+1:	dcbf	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbf's to get to ram */
+	blr
+
+/*
+ * Like above, but invalidate the D-cache.  This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(invalidate_dcache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+	sync
+1:	dcbi	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbi's to get to ram */
+	blr
+
+/*
+ * Flush a particular page from the data cache to RAM.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ *
+ *	void __flush_page_to_ram(void *page)
+ */
+_GLOBAL(__flush_page_to_ram)
+	rlwinm	r3,r3,0,0,19		/* Get page base address */
+	li	r4,4096/CACHE_LINE_SIZE	/* Number of lines in a page */
+	mtctr	r4
+	mr	r6,r3
+0:	dcbst	0,r3			/* Write line to ram */
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	0b
+	sync
+	mtctr	r4
+1:	icbi	0,r6
+	addi	r6,r6,CACHE_LINE_SIZE
+	bdnz	1b
+	sync
+	isync
+	blr
+
+/*
+ * Flush a particular page from the instruction cache.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ *
+ *	void __flush_icache_page(void *page)
+ */
+_GLOBAL(__flush_icache_page)
+	li	r4,4096/CACHE_LINE_SIZE	/* Number of lines in a page */
+	mtctr	r4
+1:	icbi	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync
+	isync
+	blr
+
+/*
+ * Clear a page using the dcbz instruction, which doesn't cause any
+ * memory traffic (except to write out any cache lines which get
+ * displaced).  This only works on cacheable memory.
+ */
+_GLOBAL(clear_page)
+	li	r0,4096/CACHE_LINE_SIZE
+	mtctr	r0
+1:	dcbz	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	blr
+
+/*
+ * Enable L1 Instruction cache
+ */
+_GLOBAL(icache_enable)
+	mfspr	r3, HID0
+	li	r5, HID0_ICFI|HID0_ILOCK
+	andc	r3, r3, r5
+	ori	r3, r3, HID0_ICE
+	ori	r5, r3, HID0_ICFI
+	mtspr	HID0, r5
+	mtspr	HID0, r3
+	isync
+	blr
+
+/*
+ * Disable L1 Instruction cache
+ */
+_GLOBAL(icache_disable)
+	mfspr	r3, HID0
+	li	r5, 0
+	ori	r5, r5, HID0_ICE
+	andc	r3, r3, r5
+	mtspr	HID0, r3
+	isync
+	blr
+
+/*
+ * Is instruction cache enabled?
+ */
+_GLOBAL(icache_status)
+	mfspr	r3, HID0
+	andi.	r3, r3, HID0_ICE
+	blr
+
+
+_GLOBAL(l1dcache_enable)
+	mfspr	r3, HID0
+	li	r5, HID0_DCFI|HID0_DLOCK
+	andc	r3, r3, r5
+	mtspr	HID0, r3		/* no invalidate, unlock */
+	ori	r3, r3, HID0_DCE
+	ori	r5, r3, HID0_DCFI
+	mtspr	HID0, r5		/* enable + invalidate */
+	mtspr	HID0, r3		/* enable */
+	sync
+	blr
+
+/*
+ * Enable data cache(s) - L1 and optionally L2
+ * Calls l2cache_enable. LR saved in r5
+ */
+_GLOBAL(dcache_enable)
+	mfspr	r3, HID0
+	li	r5, HID0_DCFI|HID0_DLOCK
+	andc	r3, r3, r5
+	mtspr	HID0, r3		/* no invalidate, unlock */
+	ori	r3, r3, HID0_DCE
+	ori	r5, r3, HID0_DCFI
+	mtspr	HID0, r5		/* enable + invalidate */
+	mtspr	HID0, r3		/* enable */
+	sync
+#ifdef CFG_L2
+	mflr	r5
+	bl	l2cache_enable		/* uses r3 and r4 */
+	sync
+	mtlr	r5
+#endif
+	blr
+
+
+/*
+ * Disable data cache(s) - L1 and optionally L2
+ * Calls flush_data_cache and l2cache_disable_no_flush.
+ * LR saved in r4
+ */
+_GLOBAL(dcache_disable)
+	mflr	r4			/* save link register */
+	bl	flush_data_cache	/* uses r3 and r5 */
+	sync
+	mfspr	r3, HID0
+	li	r5, HID0_DCFI|HID0_DLOCK
+	andc	r3, r3, r5
+	mtspr	HID0, r3		/* no invalidate, unlock */
+	li	r5, HID0_DCE|HID0_DCFI
+	andc	r3, r3, r5		/* no enable, no invalidate */
+	mtspr	HID0, r3
+	sync
+#ifdef CFG_L2
+	bl	l2cache_disable_no_flush /* uses r3 */
+#endif
+	mtlr	r4			/* restore link register */
+	blr
+
+/*
+ * Is data cache enabled?
+ */
+_GLOBAL(dcache_status)
+	mfspr	r3, HID0
+	andi.	r3, r3, HID0_DCE
+	blr
+
+/*
+ * Invalidate L2 cache using L2I, assume L2 is enabled
+ */
+_GLOBAL(l2cache_invalidate)
+	mfspr	r3, l2cr
+	rlwinm.	r3, r3, 0, 0, 0
+	beq	1f
+
+	mfspr	r3, l2cr
+	rlwinm	r3, r3, 0, 1, 31
+
+#ifdef	CONFIG_ALTIVEC
+	dssall
+#endif
+	sync
+	mtspr	l2cr, r3
+	sync
+1:	mfspr	r3, l2cr
+	oris	r3, r3, L2CR_L2I@h
+	mtspr	l2cr, r3
+
+invl2:
+	mfspr	r3, l2cr
+	andi.	r3, r3, L2CR_L2I@h
+	bne	invl2
+	blr
+
+/*
+ * Enable L2 cache
+ * Calls l2cache_invalidate. LR is saved in r4
+ */
+_GLOBAL(l2cache_enable)
+	mflr	r4			/* save link register */
+	bl	l2cache_invalidate	/* uses r3 */
+	sync
+	lis	r3, L2_ENABLE@h
+	ori	r3, r3, L2_ENABLE@l
+	mtspr	l2cr, r3
+	isync
+	mtlr	r4			/* restore link register */
+	blr
+
+/*
+ * Disable L2 cache
+ * Calls flush_data_cache. LR is saved in r4
+ */
+_GLOBAL(l2cache_disable)
+	mflr	r4			/* save link register */
+	bl	flush_data_cache	/* uses r3 and r5 */
+	sync
+	mtlr	r4			/* restore link register */
+l2cache_disable_no_flush:		/* provide way to disable L2 w/o flushing */
+	lis	r3, L2_INIT@h
+	ori	r3, r3, L2_INIT@l
+	mtspr	l2cr, r3
+	isync
+	blr
diff --git a/cpu/mpc86xx/config.mk b/cpu/mpc86xx/config.mk
new file mode 100644
index 0000000..3c54f4a
--- /dev/null
+++ b/cpu/mpc86xx/config.mk
@@ -0,0 +1,26 @@
+#
+# (C) Copyright 2004 Freescale Semiconductor.
+# Jeff Brown
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx -ffixed-r2 -ffixed-r29 -mstring
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
new file mode 100644
index 0000000..551b243
--- /dev/null
+++ b/cpu/mpc86xx/cpu.c
@@ -0,0 +1,308 @@
+/*
+ * Copyright 2006 Freescale Semiconductor
+ * Jeff Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/cache.h>
+#include <mpc86xx.h>
+
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
+#ifdef CONFIG_MPC8641HPCN
+extern void mpc8641_reset_board(cmd_tbl_t *cmdtp, int flag,
+				int argc, char *argv[]);
+#endif
+
+
+int
+checkcpu(void)
+{
+	sys_info_t sysinfo;
+	uint pvr, svr;
+	uint ver;
+	uint major, minor;
+	uint lcrr;		/* local bus clock ratio register */
+	uint clkdiv;		/* clock divider portion of lcrr */
+
+	puts("Freescale PowerPC\n");
+
+	pvr = get_pvr();
+	ver = PVR_VER(pvr);
+	major = PVR_MAJ(pvr);
+	minor = PVR_MIN(pvr);
+
+	puts("CPU:\n");
+	puts("    Core: ");
+
+	switch (ver) {
+	case PVR_VER(PVR_86xx):
+		puts("E600");
+		break;
+	default:
+		puts("Unknown");
+		break;
+	}
+	printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
+
+	svr = get_svr();
+	ver = SVR_VER(svr);
+	major = SVR_MAJ(svr);
+	minor = SVR_MIN(svr);
+
+	puts("    System: ");
+	switch (ver) {
+	case SVR_8641:
+	    if (SVR_SUBVER(svr) == 1) {
+		puts("8641D");
+	    } else {
+		puts("8641");
+	    }
+	    break;
+	default:
+		puts("Unknown");
+		break;
+	}
+	printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
+
+	get_sys_info(&sysinfo);
+
+	puts("    Clocks: ");
+	printf("CPU:%4lu MHz, ", sysinfo.freqProcessor / 1000000);
+	printf("MPX:%4lu MHz, ", sysinfo.freqSystemBus / 1000000);
+	printf("DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000);
+
+#if defined(CFG_LBC_LCRR)
+	lcrr = CFG_LBC_LCRR;
+#else
+	{
+		volatile immap_t *immap = (immap_t *) CFG_IMMR;
+		volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+
+		lcrr = lbc->lcrr;
+	}
+#endif
+	clkdiv = lcrr & 0x0f;
+	if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
+		printf("LBC:%4lu MHz\n",
+		       sysinfo.freqSystemBus / 1000000 / clkdiv);
+	} else {
+		printf("    LBC: unknown (lcrr: 0x%08x)\n", lcrr);
+	}
+
+	puts("    L2: ");
+	if (get_l2cr() & 0x80000000)
+		puts("Enabled\n");
+	else
+		puts("Disabled\n");
+
+	return 0;
+}
+
+
+static inline void
+soft_restart(unsigned long addr)
+{
+#ifndef CONFIG_MPC8641HPCN
+
+	/*
+	 * SRR0 has system reset vector, SRR1 has default MSR value
+	 * rfi restores MSR from SRR1 and sets the PC to the SRR0 value
+	 */
+
+	__asm__ __volatile__ ("mtspr	26, %0"		:: "r" (addr));
+	__asm__ __volatile__ ("li	4, (1 << 6)"	::: "r4");
+	__asm__ __volatile__ ("mtspr	27, 4");
+	__asm__ __volatile__ ("rfi");
+
+#else /* CONFIG_MPC8641HPCN */
+
+	out8(PIXIS_BASE + PIXIS_RST, 0);
+
+#endif /* !CONFIG_MPC8641HPCN */
+
+	while (1) ;		/* not reached */
+}
+
+
+/*
+ * No generic way to do board reset. Simply call soft_reset.
+ */
+void
+do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+#ifndef CONFIG_MPC8641HPCN
+
+#ifdef CFG_RESET_ADDRESS
+	ulong addr = CFG_RESET_ADDRESS;
+#else
+	/*
+	 * note: when CFG_MONITOR_BASE points to a RAM address,
+	 * CFG_MONITOR_BASE - sizeof (ulong) is usually a valid
+	 * address. Better pick an address known to be invalid on your
+	 * system and assign it to CFG_RESET_ADDRESS.
+	 */
+	ulong addr = CFG_MONITOR_BASE - sizeof(ulong);
+#endif
+
+	/* flush and disable I/D cache */
+	__asm__ __volatile__ ("mfspr	3, 1008"	::: "r3");
+	__asm__ __volatile__ ("ori	5, 5, 0xcc00"	::: "r5");
+	__asm__ __volatile__ ("ori	4, 3, 0xc00"	::: "r4");
+	__asm__ __volatile__ ("andc	5, 3, 5"	::: "r5");
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("mtspr	1008, 4");
+	__asm__ __volatile__ ("isync");
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("mtspr	1008, 5");
+	__asm__ __volatile__ ("isync");
+	__asm__ __volatile__ ("sync");
+
+	soft_restart(addr);
+
+#else /* CONFIG_MPC8641HPCN */
+
+	mpc8641_reset_board(cmdtp, flag, argc, argv);
+
+#endif /* !CONFIG_MPC8641HPCN */
+
+	while (1) ;		/* not reached */
+}
+
+
+/*
+ * Get timebase clock frequency
+ */
+unsigned long
+get_tbclk(void)
+{
+	sys_info_t sys_info;
+
+	get_sys_info(&sys_info);
+	return (sys_info.freqSystemBus + 3L) / 4L;
+}
+
+
+#if defined(CONFIG_WATCHDOG)
+void
+watchdog_reset(void)
+{
+}
+#endif	/* CONFIG_WATCHDOG */
+
+
+#if defined(CONFIG_DDR_ECC)
+void
+dma_init(void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile ccsr_dma_t *dma = &immap->im_dma;
+
+	dma->satr0 = 0x00040000;
+	dma->datr0 = 0x00040000;
+	asm("sync; isync");
+}
+
+uint
+dma_check(void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile ccsr_dma_t *dma = &immap->im_dma;
+	volatile uint status = dma->sr0;
+
+	/* While the channel is busy, spin */
+	while ((status & 4) == 4) {
+		status = dma->sr0;
+	}
+
+	if (status != 0) {
+		printf("DMA Error: status = %x\n", status);
+	}
+	return status;
+}
+
+int
+dma_xfer(void *dest, uint count, void *src)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile ccsr_dma_t *dma = &immap->im_dma;
+
+	dma->dar0 = (uint) dest;
+	dma->sar0 = (uint) src;
+	dma->bcr0 = count;
+	dma->mr0 = 0xf000004;
+	asm("sync;isync");
+	dma->mr0 = 0xf000005;
+	asm("sync;isync");
+	return dma_check();
+}
+
+#endif	/* CONFIG_DDR_ECC */
+
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_cpu_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	ulong clock;
+	int len;
+
+	clock = bd->bi_busfreq;
+	p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
+	if (p != NULL)
+		*p = cpu_to_be32(clock);
+
+	p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
+	if (p != NULL)
+		*p = cpu_to_be32(clock);
+
+	p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len);
+	if (p != NULL)
+		*p = cpu_to_be32(clock);
+
+#if defined(CONFIG_MPC86XX_TSEC1)
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
+	memcpy(p, bd->bi_enetaddr, 6);
+#endif
+
+#if defined(CONFIG_MPC86XX_TSEC2)
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
+	memcpy(p, bd->bi_enet1addr, 6);
+#endif
+
+#if defined(CONFIG_MPC86XX_TSEC3)
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
+	memcpy(p, bd->bi_enet2addr, 6);
+#endif
+
+#if defined(CONFIG_MPC86XX_TSEC4)
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
+	memcpy(p, bd->bi_enet3addr, 6);
+#endif
+
+}
+#endif
diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c
new file mode 100644
index 0000000..4673d05
--- /dev/null
+++ b/cpu/mpc86xx/cpu_init.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * Jeff Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * cpu_init.c - low level cpu init
+ */
+
+#include <common.h>
+#include <mpc86xx.h>
+
+/*
+ * Breathe some life into the CPU...
+ *
+ * Set up the memory map
+ * initialize a bunch of registers
+ */
+
+void cpu_init_f(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
+
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+
+	/* Clear initial global data */
+	memset ((void *) gd, 0, sizeof (gd_t));
+
+	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
+	 * addresses - these have to be modified later when FLASH size
+	 * has been determined
+	 */
+
+#if defined(CFG_OR0_REMAP)
+	memctl->or0 = CFG_OR0_REMAP;
+#endif
+#if defined(CFG_OR1_REMAP)
+	memctl->or1 = CFG_OR1_REMAP;
+#endif
+
+	/* now restrict to preliminary range */
+#if defined(CFG_BR0_PRELIM) && defined(CFG_OR0_PRELIM)
+	memctl->br0 = CFG_BR0_PRELIM;
+	memctl->or0 = CFG_OR0_PRELIM;
+#endif
+
+#if defined(CFG_BR1_PRELIM) && defined(CFG_OR1_PRELIM)
+	memctl->or1 = CFG_OR1_PRELIM;
+	memctl->br1 = CFG_BR1_PRELIM;
+#endif
+
+#if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
+	memctl->or2 = CFG_OR2_PRELIM;
+	memctl->br2 = CFG_BR2_PRELIM;
+#endif
+
+#if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM)
+	memctl->or3 = CFG_OR3_PRELIM;
+	memctl->br3 = CFG_BR3_PRELIM;
+#endif
+
+#if defined(CFG_BR4_PRELIM) && defined(CFG_OR4_PRELIM)
+	memctl->or4 = CFG_OR4_PRELIM;
+	memctl->br4 = CFG_BR4_PRELIM;
+#endif
+
+#if defined(CFG_BR5_PRELIM) && defined(CFG_OR5_PRELIM)
+	memctl->or5 = CFG_OR5_PRELIM;
+	memctl->br5 = CFG_BR5_PRELIM;
+#endif
+
+#if defined(CFG_BR6_PRELIM) && defined(CFG_OR6_PRELIM)
+	memctl->or6 = CFG_OR6_PRELIM;
+	memctl->br6 = CFG_BR6_PRELIM;
+#endif
+
+#if defined(CFG_BR7_PRELIM) && defined(CFG_OR7_PRELIM)
+	memctl->or7 = CFG_OR7_PRELIM;
+	memctl->br7 = CFG_BR7_PRELIM;
+#endif
+
+	/* enable the timebase bit in HID0 */
+	set_hid0(get_hid0() | 0x4000000);
+
+	/* enable SYNCBE | ABE bits in  HID1 */
+	set_hid1(get_hid1() | 0x00000C00);
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r(void)
+{
+	return 0;
+}
diff --git a/cpu/mpc86xx/interrupts.c b/cpu/mpc86xx/interrupts.c
new file mode 100644
index 0000000..1df6cdc
--- /dev/null
+++ b/cpu/mpc86xx/interrupts.c
@@ -0,0 +1,204 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 (440 port)
+ * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
+ *
+ * (C) Copyright 2003 Motorola Inc. (MPC85xx port)
+ * Xianghua Xiao (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2004 Freescale Semiconductor. (MPC86xx Port)
+ * Jeff Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc86xx.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <ppc_asm.tmpl>
+
+unsigned long decrementer_count;    /* count value for 1e6/HZ microseconds */
+unsigned long timestamp;
+
+
+static __inline__ unsigned long get_msr(void)
+{
+	unsigned long msr;
+
+	asm volatile ("mfmsr %0":"=r" (msr):);
+
+	return msr;
+}
+
+static __inline__ void set_msr(unsigned long msr)
+{
+	asm volatile ("mtmsr %0"::"r" (msr));
+}
+
+static __inline__ unsigned long get_dec(void)
+{
+	unsigned long val;
+
+	asm volatile ("mfdec %0":"=r" (val):);
+
+	return val;
+}
+
+static __inline__ void set_dec(unsigned long val)
+{
+	if (val)
+		asm volatile ("mtdec %0"::"r" (val));
+}
+
+/* interrupt is not supported yet */
+int interrupt_init_cpu(unsigned *decrementer_count)
+{
+	return 0;
+}
+
+int interrupt_init(void)
+{
+	int ret;
+
+	/* call cpu specific function from $(CPU)/interrupts.c */
+	ret = interrupt_init_cpu(&decrementer_count);
+
+	if (ret)
+		return ret;
+
+	decrementer_count = get_tbclk() / CFG_HZ;
+	debug("interrupt init: tbclk() = %d MHz, decrementer_count = %d\n",
+	      (get_tbclk() / 1000000),
+	      decrementer_count);
+
+	set_dec(decrementer_count);
+
+	set_msr(get_msr() | MSR_EE);
+
+	debug("MSR = 0x%08lx, Decrementer reg = 0x%08lx\n",
+	      get_msr(),
+	      get_dec());
+
+	return 0;
+}
+
+void enable_interrupts(void)
+{
+	set_msr(get_msr() | MSR_EE);
+}
+
+/* returns flag if MSR_EE was set before */
+int disable_interrupts(void)
+{
+	ulong msr = get_msr();
+
+	set_msr(msr & ~MSR_EE);
+	return (msr & MSR_EE) != 0;
+}
+
+void increment_timestamp(void)
+{
+	timestamp++;
+}
+
+/*
+ * timer_interrupt - gets called when the decrementer overflows,
+ * with interrupts disabled.
+ * Trivial implementation - no need to be really accurate.
+ */
+void timer_interrupt_cpu(struct pt_regs *regs)
+{
+	/* nothing to do here */
+}
+
+void timer_interrupt(struct pt_regs *regs)
+{
+	/* call cpu specific function from $(CPU)/interrupts.c */
+	timer_interrupt_cpu(regs);
+
+	timestamp++;
+
+	ppcDcbf(&timestamp);
+
+	/* Restore Decrementer Count */
+	set_dec(decrementer_count);
+
+#if defined(CONFIG_WATCHDOG) || defined (CONFIG_HW_WATCHDOG)
+	if ((timestamp % (CFG_WATCHDOG_FREQ)) == 0)
+		WATCHDOG_RESET();
+#endif /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */
+
+#ifdef CONFIG_STATUS_LED
+	status_led_tick(timestamp);
+#endif /* CONFIG_STATUS_LED */
+
+#ifdef CONFIG_SHOW_ACTIVITY
+	board_show_activity(timestamp);
+#endif /* CONFIG_SHOW_ACTIVITY */
+
+}
+
+void reset_timer(void)
+{
+	timestamp = 0;
+}
+
+ulong get_timer(ulong base)
+{
+	return timestamp - base;
+}
+
+void set_timer(ulong t)
+{
+	timestamp = t;
+}
+
+/*
+ * Install and free a interrupt handler. Not implemented yet.
+ */
+
+void irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
+{
+}
+
+void irq_free_handler(int vec)
+{
+}
+
+/*
+ * irqinfo - print information about PCI devices,not implemented.
+ */
+int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	printf("\nInterrupt-unsupported:\n");
+
+	return 0;
+}
+
+/*
+ * Handle external interrupts
+ */
+void external_interrupt(struct pt_regs *regs)
+{
+	puts("external_interrupt (oops!)\n");
+}
diff --git a/cpu/mpc86xx/pci.c b/cpu/mpc86xx/pci.c
new file mode 100644
index 0000000..b86548d
--- /dev/null
+++ b/cpu/mpc86xx/pci.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) Freescale Semiconductor,Inc.
+ * 2005, 2006. All rights reserved.
+ *
+ * Ed Swarthout (ed.swarthout@freescale.com)
+ * Jason Jin (Jason.jin@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * PCIE Configuration space access support for PCIE Bridge
+ */
+#include <common.h>
+#include <pci.h>
+
+#if defined(CONFIG_PCI)
+void
+pci_mpc86xx_init(struct pci_controller *hose)
+{
+	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+	volatile ccsr_pex_t *pcie1 = &immap->im_pex1;
+	u16 temp16;
+	u32 temp32;
+
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
+	uint pcie1_host = (host1_agent == 2) || (host1_agent == 3);
+	uint pcie1_agent = (host1_agent == 0) || (host1_agent == 1);
+	uint devdisr = gur->devdisr;
+	uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
+
+	if ((io_sel == 2 || io_sel == 3 || io_sel == 5 || io_sel == 6 ||
+	     io_sel == 7 || io_sel == 0xf)
+	    && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
+		printf("PCI-EXPRESS 1: Configured as %s \n",
+		       pcie1_agent ? "Agent" : "Host");
+		if (pcie1_agent)
+			return;	/*Don't scan bus when configured as agent */
+		printf("               Scanning PCIE bus");
+		debug("0x%08x=0x%08x ",
+		      &pcie1->pme_msg_det,
+		      pcie1->pme_msg_det);
+		if (pcie1->pme_msg_det) {
+			pcie1->pme_msg_det = 0xffffffff;
+			debug(" with errors.  Clearing.  Now 0x%08x",
+			      pcie1->pme_msg_det);
+		}
+		debug("\n");
+	} else {
+		printf("PCI-EXPRESS 1 disabled!\n");
+		return;
+	}
+
+	/*
+	 * Set first_bus=0 only skipped B0:D0:F0 which is
+	 * a reserved device in M1575, but make it easy for
+	 * most of the scan process.
+	 */
+	hose->first_busno = 0x00;
+	hose->last_busno = 0xfe;
+
+	pcie_setup_indirect(hose, (CFG_IMMR + 0x8000), (CFG_IMMR + 0x8004));
+
+	pci_hose_read_config_word(hose,
+				  PCI_BDF(0, 0, 0), PCI_COMMAND, &temp16);
+	temp16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER |
+	    PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
+	pci_hose_write_config_word(hose,
+				   PCI_BDF(0, 0, 0), PCI_COMMAND, temp16);
+
+	pci_hose_write_config_word(hose, PCI_BDF(0, 0, 0), PCI_STATUS, 0xffff);
+	pci_hose_write_config_byte(hose,
+				   PCI_BDF(0, 0, 0), PCI_LATENCY_TIMER, 0x80);
+
+	pci_hose_read_config_dword(hose, PCI_BDF(0, 0, 0), PCI_PRIMARY_BUS,
+				   &temp32);
+	temp32 = (temp32 & 0xff000000) | (0xff) | (0x0 << 8) | (0xfe << 16);
+	pci_hose_write_config_dword(hose, PCI_BDF(0, 0, 0), PCI_PRIMARY_BUS,
+				    temp32);
+
+	pcie1->powar1 = 0;
+	pcie1->powar2 = 0;
+	pcie1->piwar1 = 0;
+	pcie1->piwar1 = 0;
+
+	pcie1->powbar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
+	pcie1->powar1 = 0x8004401c;	/* 512M MEM space */
+	pcie1->potar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
+	pcie1->potear1 = 0x00000000;
+
+	pcie1->powbar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
+	pcie1->powar2 = 0x80088017;	/* 16M IO space */
+	pcie1->potar2 = 0x00000000;
+	pcie1->potear2 = 0x00000000;
+
+	pcie1->pitar1 = 0x00000000;
+	pcie1->piwbar1 = 0x00000000;
+	/* Enable, Prefetch, Local Mem, * Snoop R/W, 2G */
+	pcie1->piwar1 = 0xa0f5501e;
+
+	pci_set_region(hose->regions + 0,
+		       CFG_PCI_MEMORY_BUS,
+		       CFG_PCI_MEMORY_PHYS,
+		       CFG_PCI_MEMORY_SIZE,
+		       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+	pci_set_region(hose->regions + 1,
+		       CFG_PCI1_MEM_BASE,
+		       CFG_PCI1_MEM_PHYS,
+		       CFG_PCI1_MEM_SIZE,
+		       PCI_REGION_MEM);
+
+	pci_set_region(hose->regions + 2,
+		       CFG_PCI1_IO_BASE,
+		       CFG_PCI1_IO_PHYS,
+		       CFG_PCI1_IO_SIZE,
+		       PCI_REGION_IO);
+
+	hose->region_count = 3;
+
+	pci_register_hose(hose);
+
+	hose->last_busno = pci_hose_scan(hose);
+	debug("pcie_mpc86xx_init: last_busno %x\n", hose->last_busno);
+	debug("pcie_mpc86xx init: current_busno %x\n ", hose->current_busno);
+
+	printf("....PCIE1 scan & enumeration done\n");
+}
+#endif				/* CONFIG_PCI */
diff --git a/cpu/mpc86xx/pcie_indirect.c b/cpu/mpc86xx/pcie_indirect.c
new file mode 100644
index 0000000..b00ad76
--- /dev/null
+++ b/cpu/mpc86xx/pcie_indirect.c
@@ -0,0 +1,199 @@
+/*
+ * Support for indirect PCI bridges.
+ *
+ * Copyright (c) Freescale Semiconductor, Inc.
+ * 2006. All rights reserved.
+ *
+ * Jason Jin <Jason.jin@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * partly derived from
+ * arch/powerpc/platforms/86xx/mpc86xx_pcie.c
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_PCI
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#define PCI_CFG_OUT 	out_be32
+#define PEX_FIX		out_be32(hose->cfg_addr+0x4, 0x0400ffff)
+
+static int
+indirect_read_config_pcie(struct pci_controller *hose,
+			  pci_dev_t dev,
+			  int offset,
+			  int len,
+			  u32 *val)
+{
+	int bus = PCI_BUS(dev);
+
+	volatile unsigned char *cfg_data;
+	u32 temp;
+
+	PEX_FIX;
+	if (bus == 0xff) {
+		PCI_CFG_OUT(hose->cfg_addr,
+			    dev | (offset & 0xfc) | 0x80000001);
+	} else {
+		PCI_CFG_OUT(hose->cfg_addr,
+			    dev | (offset & 0xfc) | 0x80000000);
+	}
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	/* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
+	cfg_data = hose->cfg_data;
+	PEX_FIX;
+	temp = in_le32((u32 *) cfg_data);
+	switch (len) {
+	case 1:
+		*val = (temp >> (((offset & 3)) * 8)) & 0xff;
+		break;
+	case 2:
+		*val = (temp >> (((offset & 3)) * 8)) & 0xffff;
+		break;
+	default:
+		*val = temp;
+		break;
+	}
+
+	return 0;
+}
+
+static int
+indirect_write_config_pcie(struct pci_controller *hose,
+			   pci_dev_t dev,
+			   int offset,
+			   int len,
+			   u32 val)
+{
+	int bus = PCI_BUS(dev);
+	volatile unsigned char *cfg_data;
+	u32 temp;
+
+	PEX_FIX;
+	if (bus == 0xff) {
+		PCI_CFG_OUT(hose->cfg_addr,
+			    dev | (offset & 0xfc) | 0x80000001);
+	} else {
+		PCI_CFG_OUT(hose->cfg_addr,
+			    dev | (offset & 0xfc) | 0x80000000);
+	}
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	/* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
+	cfg_data = hose->cfg_data;
+	switch (len) {
+	case 1:
+		PEX_FIX;
+		temp = in_le32((u32 *) cfg_data);
+		temp = (temp & ~(0xff << ((offset & 3) * 8))) |
+		    (val << ((offset & 3) * 8));
+		PEX_FIX;
+		out_le32((u32 *) cfg_data, temp);
+		break;
+	case 2:
+		PEX_FIX;
+		temp = in_le32((u32 *) cfg_data);
+		temp = (temp & ~(0xffff << ((offset & 3) * 8)));
+		temp |= (val << ((offset & 3) * 8));
+		PEX_FIX;
+		out_le32((u32 *) cfg_data, temp);
+		break;
+	default:
+		PEX_FIX;
+		out_le32((u32 *) cfg_data, val);
+		break;
+	}
+	PEX_FIX;
+	return 0;
+}
+
+static int
+indirect_read_config_byte_pcie(struct pci_controller *hose,
+			       pci_dev_t dev,
+			       int offset,
+			       u8 *val)
+{
+	u32 val32;
+	indirect_read_config_pcie(hose, dev, offset, 1, &val32);
+	*val = (u8) val32;
+	return 0;
+}
+
+static int
+indirect_read_config_word_pcie(struct pci_controller *hose,
+			       pci_dev_t dev,
+			       int offset,
+			       u16 *val)
+{
+	u32 val32;
+	indirect_read_config_pcie(hose, dev, offset, 2, &val32);
+	*val = (u16) val32;
+	return 0;
+}
+
+static int
+indirect_read_config_dword_pcie(struct pci_controller *hose,
+				pci_dev_t dev,
+				int offset,
+				u32 *val)
+{
+	return indirect_read_config_pcie(hose, dev, offset, 4, val);
+}
+
+static int
+indirect_write_config_byte_pcie(struct pci_controller *hose,
+				pci_dev_t dev,
+				int offset,
+				u8 val)
+{
+	return indirect_write_config_pcie(hose, dev, offset, 1, (u32) val);
+}
+
+static int
+indirect_write_config_word_pcie(struct pci_controller *hose,
+				pci_dev_t dev,
+				int offset,
+				unsigned short val)
+{
+	return indirect_write_config_pcie(hose, dev, offset, 2, (u32) val);
+}
+
+static int
+indirect_write_config_dword_pcie(struct pci_controller *hose,
+				 pci_dev_t dev,
+				 int offset,
+				 u32 val)
+{
+	return indirect_write_config_pcie(hose, dev, offset, 4, val);
+}
+
+void
+pcie_setup_indirect(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
+{
+	pci_set_ops(hose,
+		    indirect_read_config_byte_pcie,
+		    indirect_read_config_word_pcie,
+		    indirect_read_config_dword_pcie,
+		    indirect_write_config_byte_pcie,
+		    indirect_write_config_word_pcie,
+		    indirect_write_config_dword_pcie);
+
+	hose->cfg_addr = (unsigned int *)cfg_addr;
+	hose->cfg_data = (unsigned char *)cfg_data;
+}
+
+#endif				/* CONFIG_PCI */
diff --git a/cpu/mpc86xx/resetvec.S b/cpu/mpc86xx/resetvec.S
new file mode 100644
index 0000000..9a552f6
--- /dev/null
+++ b/cpu/mpc86xx/resetvec.S
@@ -0,0 +1,2 @@
+	.section .resetvec,"ax"
+	b _start
diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c
new file mode 100644
index 0000000..97bbf43
--- /dev/null
+++ b/cpu/mpc86xx/spd_sdram.c
@@ -0,0 +1,1324 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * (C) Copyright 2003 Motorola Inc.
+ * Xianghua Xiao (X.Xiao@motorola.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <spd.h>
+#include <asm/mmu.h>
+
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void dma_init(void);
+extern uint dma_check(void);
+extern int dma_xfer(void *dest, uint count, void *src);
+#endif
+
+#ifdef CONFIG_SPD_EEPROM
+
+#ifndef	CFG_READ_SPD
+#define CFG_READ_SPD	i2c_read
+#endif
+
+/*
+ * Only one of the following three should be 1; others should be 0
+ * By default the cache line interleaving is selected if
+ * the CONFIG_DDR_INTERLEAVE flag is defined
+ */
+#define CFG_PAGE_INTERLEAVING		0
+#define CFG_BANK_INTERLEAVING		0
+#define CFG_SUPER_BANK_INTERLEAVING	0
+
+/*
+ * Convert picoseconds into clock cycles (rounding up if needed).
+ */
+
+int
+picos_to_clk(int picos)
+{
+	int clks;
+
+	clks = picos / (2000000000 / (get_bus_freq(0) / 1000));
+	if (picos % (2000000000 / (get_bus_freq(0) / 1000)) != 0) {
+		clks++;
+	}
+
+	return clks;
+}
+
+
+/*
+ * Calculate the Density of each Physical Rank.
+ * Returned size is in bytes.
+ *
+ * Study these table from Byte 31 of JEDEC SPD Spec.
+ *
+ *		DDR I	DDR II
+ *	Bit	Size	Size
+ *	---	-----	------
+ *	7 high	512MB	512MB
+ *	6	256MB	256MB
+ *	5	128MB	128MB
+ *	4	 64MB	 16GB
+ *	3	 32MB	  8GB
+ *	2	 16MB	  4GB
+ *	1	  2GB	  2GB
+ *	0 low	  1GB	  1GB
+ *
+ * Reorder Table to be linear by stripping the bottom
+ * 2 or 5 bits off and shifting them up to the top.
+ */
+
+unsigned int
+compute_banksize(unsigned int mem_type, unsigned char row_dens)
+{
+	unsigned int bsize;
+
+	if (mem_type == SPD_MEMTYPE_DDR) {
+		/* Bottom 2 bits up to the top. */
+		bsize = ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24;
+		debug("DDR: DDR I rank density = 0x%08x\n", bsize);
+	} else {
+		/* Bottom 5 bits up to the top. */
+		bsize = ((row_dens >> 5) | ((row_dens & 31) << 3)) << 27;
+		debug("DDR: DDR II rank density = 0x%08x\n", bsize);
+	}
+	return bsize;
+}
+
+
+/*
+ * Convert a two-nibble BCD value into a cycle time.
+ * While the spec calls for nano-seconds, picos are returned.
+ *
+ * This implements the tables for bytes 9, 23 and 25 for both
+ * DDR I and II.  No allowance for distinguishing the invalid
+ * fields absent for DDR I yet present in DDR II is made.
+ * (That is, cycle times of .25, .33, .66 and .75 ns are
+ * allowed for both DDR II and I.)
+ */
+
+unsigned int
+convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
+{
+	/*
+	 * Table look up the lower nibble, allow DDR I & II.
+	 */
+	unsigned int tenths_ps[16] = {
+		0,
+		100,
+		200,
+		300,
+		400,
+		500,
+		600,
+		700,
+		800,
+		900,
+		250,
+		330,
+		660,
+		750,
+		0,	/* undefined */
+		0	/* undefined */
+	};
+
+	unsigned int whole_ns = (spd_val & 0xF0) >> 4;
+	unsigned int tenth_ns = spd_val & 0x0F;
+	unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns];
+
+	return ps;
+}
+
+
+/*
+ * Determine Refresh Rate.  Ignore self refresh bit on DDR I.
+ * Table from SPD Spec, Byte 12, converted to picoseconds and
+ * filled in with "default" normal values.
+ */
+unsigned int determine_refresh_rate(unsigned int spd_refresh)
+{
+	unsigned int refresh_time_ns[8] = {
+		15625000,	/* 0 Normal    1.00x */
+		3900000,	/* 1 Reduced    .25x */
+		7800000,	/* 2 Extended   .50x */
+		31300000,	/* 3 Extended  2.00x */
+		62500000,	/* 4 Extended  4.00x */
+		125000000,	/* 5 Extended  8.00x */
+		15625000,	/* 6 Normal    1.00x  filler */
+		15625000,	/* 7 Normal    1.00x  filler */
+	};
+
+	return picos_to_clk(refresh_time_ns[spd_refresh & 0x7]);
+}
+
+
+long int
+spd_init(unsigned char i2c_address, unsigned int ddr_num,
+	 unsigned int dimm_num, unsigned int start_addr)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_ddr_t *ddr;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	spd_eeprom_t spd;
+	unsigned int n_ranks;
+	unsigned int rank_density;
+	unsigned int odt_rd_cfg, odt_wr_cfg;
+	unsigned int odt_cfg, mode_odt_enable;
+	unsigned int refresh_clk;
+#ifdef MPC86xx_DDR_SDRAM_CLK_CNTL
+	unsigned char clk_adjust;
+#endif
+	unsigned int dqs_cfg;
+	unsigned char twr_clk, twtr_clk, twr_auto_clk;
+	unsigned int tCKmin_ps, tCKmax_ps;
+	unsigned int max_data_rate;
+	unsigned int busfreq;
+	unsigned sdram_cfg_1;
+	unsigned int memsize;
+	unsigned char caslat, caslat_ctrl;
+	unsigned int trfc, trfc_clk, trfc_low, trfc_high;
+	unsigned int trcd_clk;
+	unsigned int trtp_clk;
+	unsigned char cke_min_clk;
+	unsigned char add_lat;
+	unsigned char wr_lat;
+	unsigned char wr_data_delay;
+	unsigned char four_act;
+	unsigned char cpo;
+	unsigned char burst_len;
+	unsigned int mode_caslat;
+	unsigned char sdram_type;
+	unsigned char d_init;
+	unsigned int law_size;
+	volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
+	unsigned int tCycle_ps, modfreq;
+
+	if (ddr_num == 1)
+		ddr = &immap->im_ddr1;
+	else
+		ddr = &immap->im_ddr2;
+
+	/*
+	 * Read SPD information.
+	 */
+	debug("Performing SPD read at I2C address 0x%02lx\n",i2c_address);
+	memset((void *)&spd, 0, sizeof(spd));
+	CFG_READ_SPD(i2c_address, 0, 1, (uchar *) &spd, sizeof(spd));
+
+	/*
+	 * Check for supported memory module types.
+	 */
+	if (spd.mem_type != SPD_MEMTYPE_DDR &&
+	    spd.mem_type != SPD_MEMTYPE_DDR2) {
+		debug("Warning: Unable to locate DDR I or DDR II module for DIMM %d of DDR controller %d.\n"
+		      "         Fundamental memory type is 0x%0x\n",
+		      dimm_num,
+		      ddr_num,
+		      spd.mem_type);
+		return 0;
+	}
+
+	debug("\nFound memory of type 0x%02lx  ", spd.mem_type);
+	if (spd.mem_type == SPD_MEMTYPE_DDR)
+		debug("DDR I\n");
+	else
+		debug("DDR II\n");
+
+	/*
+	 * These test gloss over DDR I and II differences in interpretation
+	 * of bytes 3 and 4, but irrelevantly.  Multiple asymmetric banks
+	 * are not supported on DDR I; and not encoded on DDR II.
+	 *
+	 * Also note that the 8548 controller can support:
+	 *    12 <= nrow <= 16
+	 * and
+	 *     8 <= ncol <= 11 (still, for DDR)
+	 *     6 <= ncol <=  9 (for FCRAM)
+	 */
+	if (spd.nrow_addr < 12 || spd.nrow_addr > 14) {
+		printf("DDR: Unsupported number of Row Addr lines: %d.\n",
+		       spd.nrow_addr);
+		return 0;
+	}
+	if (spd.ncol_addr < 8 || spd.ncol_addr > 11) {
+		printf("DDR: Unsupported number of Column Addr lines: %d.\n",
+		       spd.ncol_addr);
+		return 0;
+	}
+
+	/*
+	 * Determine the number of physical banks controlled by
+	 * different Chip Select signals.  This is not quite the
+	 * same as the number of DIMM modules on the board.  Feh.
+	 */
+	if (spd.mem_type == SPD_MEMTYPE_DDR) {
+		n_ranks = spd.nrows;
+	} else {
+		n_ranks = (spd.nrows & 0x7) + 1;
+	}
+
+	debug("DDR: number of ranks = %d\n", n_ranks);
+
+	if (n_ranks > 2) {
+		printf("DDR: Only 2 chip selects are supported: %d\n",
+		       n_ranks);
+		return 0;
+	}
+
+	/*
+	 * Adjust DDR II IO voltage biasing.  It just makes it work.
+	 */
+	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+		gur->ddrioovcr = (0
+				  | 0x80000000		/* Enable */
+				  | 0x10000000		/* VSEL to 1.8V */
+				  );
+	}
+
+	/*
+	 * Determine the size of each Rank in bytes.
+	 */
+	rank_density = compute_banksize(spd.mem_type, spd.row_dens);
+
+	debug("Start address for this controller is 0x%08lx\n", start_addr);
+
+	/*
+	 * ODT configuration recommendation from DDR Controller Chapter.
+	 */
+	odt_rd_cfg = 0;			/* Never assert ODT */
+	odt_wr_cfg = 0;			/* Never assert ODT */
+	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+		odt_wr_cfg = 1;		/* Assert ODT on writes to CS0 */
+	}
+
+#ifdef CONFIG_DDR_INTERLEAVE
+
+	if (dimm_num != 1) {
+		printf("For interleaving memory on HPCN, need to use DIMM 1 for DDR Controller %d !\n", ddr_num);
+		return 0;
+	} else {
+		/*
+		 * Since interleaved memory only uses CS0, the
+		 * memory sticks have to be identical in size and quantity
+		 * of ranks.  That essentially gives double the size on
+		 * one rank, i.e on CS0 for both controllers put together.
+		 * Confirm this???
+		 */
+		rank_density *= 2;
+
+		/*
+		 * Eg: Bounds: 0x0000_0000 to 0x0f000_0000	first 256 Meg
+		 */
+		start_addr = 0;
+		ddr->cs0_bnds = (start_addr >> 8)
+			| (((start_addr + rank_density - 1) >> 24));
+		/*
+		 * Default interleaving mode to cache-line interleaving.
+		 */
+		ddr->cs0_config = ( 1 << 31
+#if	(CFG_PAGE_INTERLEAVING == 1)
+				    | (PAGE_INTERLEAVING)
+#elif	(CFG_BANK_INTERLEAVING == 1)
+				    | (BANK_INTERLEAVING)
+#elif	(CFG_SUPER_BANK_INTERLEAVING == 1)
+				    | (SUPER_BANK_INTERLEAVING)
+#else
+				    | (CACHE_LINE_INTERLEAVING)
+#endif
+				    | (odt_rd_cfg << 20)
+				    | (odt_wr_cfg << 16)
+				    | (spd.nrow_addr - 12) << 8
+				    | (spd.ncol_addr - 8) );
+
+		debug("DDR: cs0_bnds   = 0x%08x\n", ddr->cs0_bnds);
+		debug("DDR: cs0_config = 0x%08x\n", ddr->cs0_config);
+
+		/*
+		 * Adjustment for dual rank memory to get correct memory
+		 * size (return value of this function).
+		 */
+		if (n_ranks == 2) {
+			n_ranks = 1;
+			rank_density /= 2;
+		} else {
+			rank_density /= 2;
+		}
+	}
+#else	/* CONFIG_DDR_INTERLEAVE */
+
+	if (dimm_num == 1) {
+		/*
+		 * Eg: Bounds: 0x0000_0000 to 0x0f000_0000	first 256 Meg
+		 */
+		ddr->cs0_bnds = (start_addr >> 8)
+			| (((start_addr + rank_density - 1) >> 24));
+
+		ddr->cs0_config = ( 1 << 31
+				    | (odt_rd_cfg << 20)
+				    | (odt_wr_cfg << 16)
+				    | (spd.nrow_addr - 12) << 8
+				    | (spd.ncol_addr - 8) );
+
+		debug("DDR: cs0_bnds   = 0x%08x\n", ddr->cs0_bnds);
+		debug("DDR: cs0_config = 0x%08x\n", ddr->cs0_config);
+
+		if (n_ranks == 2) {
+			/*
+			 * Eg: Bounds: 0x1000_0000 to 0x1f00_0000,
+			 * second 256 Meg
+			 */
+			ddr->cs1_bnds = (((start_addr + rank_density) >> 8)
+					| (( start_addr + 2*rank_density - 1)
+					   >> 24));
+			ddr->cs1_config = ( 1<<31
+					    | (odt_rd_cfg << 20)
+					    | (odt_wr_cfg << 16)
+					    | (spd.nrow_addr - 12) << 8
+					    | (spd.ncol_addr - 8) );
+			debug("DDR: cs1_bnds   = 0x%08x\n", ddr->cs1_bnds);
+			debug("DDR: cs1_config = 0x%08x\n", ddr->cs1_config);
+		}
+
+	} else {
+		/*
+		 * This is the 2nd DIMM slot for this controller
+		 */
+		/*
+		 * Eg: Bounds: 0x0000_0000 to 0x0f000_0000	first 256 Meg
+		 */
+		ddr->cs2_bnds = (start_addr >> 8)
+			| (((start_addr + rank_density - 1) >> 24));
+
+		ddr->cs2_config = ( 1 << 31
+				    | (odt_rd_cfg << 20)
+				    | (odt_wr_cfg << 16)
+				    | (spd.nrow_addr - 12) << 8
+				    | (spd.ncol_addr - 8) );
+
+		debug("DDR: cs2_bnds   = 0x%08x\n", ddr->cs2_bnds);
+		debug("DDR: cs2_config = 0x%08x\n", ddr->cs2_config);
+
+		if (n_ranks == 2) {
+			/*
+			 * Eg: Bounds: 0x1000_0000 to 0x1f00_0000,
+			 * second 256 Meg
+			 */
+			ddr->cs3_bnds = (((start_addr + rank_density) >> 8)
+					| (( start_addr + 2*rank_density - 1)
+					   >> 24));
+			ddr->cs3_config = ( 1<<31
+					    | (odt_rd_cfg << 20)
+					    | (odt_wr_cfg << 16)
+					    | (spd.nrow_addr - 12) << 8
+					    | (spd.ncol_addr - 8) );
+			debug("DDR: cs3_bnds   = 0x%08x\n", ddr->cs3_bnds);
+			debug("DDR: cs3_config = 0x%08x\n", ddr->cs3_config);
+		}
+	}
+#endif /* CONFIG_DDR_INTERLEAVE */
+
+	/*
+	 * Find the largest CAS by locating the highest 1 bit
+	 * in the spd.cas_lat field.  Translate it to a DDR
+	 * controller field value:
+	 *
+	 *	CAS Lat	DDR I	DDR II	Ctrl
+	 *	Clocks	SPD Bit	SPD Bit	Value
+	 *	-------	-------	-------	-----
+	 *	1.0	0		0001
+	 *	1.5	1		0010
+	 *	2.0	2	2	0011
+	 *	2.5	3		0100
+	 *	3.0	4	3	0101
+	 *	3.5	5		0110
+	 *	4.0		4	0111
+	 *	4.5			1000
+	 *	5.0		5	1001
+	 */
+	caslat = __ilog2(spd.cas_lat);
+	if ((spd.mem_type == SPD_MEMTYPE_DDR)
+	    && (caslat > 5)) {
+		printf("DDR I: Invalid SPD CAS Latency: 0x%x.\n", spd.cas_lat);
+		return 0;
+
+	} else if (spd.mem_type == SPD_MEMTYPE_DDR2
+		   && (caslat < 2 || caslat > 5)) {
+		printf("DDR II: Invalid SPD CAS Latency: 0x%x.\n",
+		       spd.cas_lat);
+		return 0;
+	}
+	debug("DDR: caslat SPD bit is %d\n", caslat);
+
+	/*
+	 * Calculate the Maximum Data Rate based on the Minimum Cycle time.
+	 * The SPD clk_cycle field (tCKmin) is measured in tenths of
+	 * nanoseconds and represented as BCD.
+	 */
+	tCKmin_ps = convert_bcd_tenths_to_cycle_time_ps(spd.clk_cycle);
+	debug("DDR: tCKmin = %d ps\n", tCKmin_ps);
+
+	/*
+	 * Double-data rate, scaled 1000 to picoseconds, and back down to MHz.
+	 */
+	max_data_rate = 2 * 1000 * 1000 / tCKmin_ps;
+	debug("DDR: Module max data rate = %d Mhz\n", max_data_rate);
+
+
+	/*
+	 * Adjust the CAS Latency to allow for bus speeds that
+	 * are slower than the DDR module.
+	 */
+	busfreq = get_bus_freq(0) / 1000000;	/* MHz */
+	tCycle_ps = convert_bcd_tenths_to_cycle_time_ps(spd.clk_cycle3);
+	modfreq = 2 * 1000 * 1000 / tCycle_ps;
+
+	if ((spd.mem_type == SPD_MEMTYPE_DDR2) && (busfreq < 266)) {
+		printf("DDR: platform frequency too low for correct DDR2 controller operation\n");
+		return 0;
+	} else if (busfreq < 90) {
+		printf("DDR: platform frequency too low for correct DDR1 operation\n");
+		return 0;
+	}
+
+	if ((busfreq <= modfreq) && (spd.cas_lat & (1 << (caslat - 2)))) {
+		caslat -= 2;
+	} else {
+		tCycle_ps = convert_bcd_tenths_to_cycle_time_ps(spd.clk_cycle2);
+		modfreq = 2 * 1000 * 1000 / tCycle_ps;
+		if ((busfreq <= modfreq) && (spd.cas_lat & (1 << (caslat - 1))))
+			caslat -= 1;
+		else if (busfreq > max_data_rate) {
+			printf("DDR: Bus freq %d MHz is not fit for DDR rate %d MHz\n",
+		     	busfreq, max_data_rate);
+			return 0;
+		}
+	}
+
+	/*
+	 * Empirically set ~MCAS-to-preamble override for DDR 2.
+	 * Your milage will vary.
+	 */
+	cpo = 0;
+	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+		if (busfreq <= 333) {
+			cpo = 0x7;
+		} else if (busfreq <= 400) {
+			cpo = 0x9;
+		} else {
+			cpo = 0xa;
+		}
+	}
+
+	/*
+	 * Convert caslat clocks to DDR controller value.
+	 * Force caslat_ctrl to be DDR Controller field-sized.
+	 */
+	if (spd.mem_type == SPD_MEMTYPE_DDR) {
+		caslat_ctrl = (caslat + 1) & 0x07;
+	} else {
+		caslat_ctrl =  (2 * caslat - 1) & 0x0f;
+	}
+
+	debug("DDR: caslat SPD bit is %d, controller field is 0x%x\n",
+	      caslat, caslat_ctrl);
+
+	/*
+	 * Timing Config 0.
+	 * Avoid writing for DDR I.  The new PQ38 DDR controller
+	 * dreams up non-zero default values to be backwards compatible.
+	 */
+	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+		unsigned char taxpd_clk = 8;		/* By the book. */
+		unsigned char tmrd_clk = 2;		/* By the book. */
+		unsigned char act_pd_exit = 2;		/* Empirical? */
+		unsigned char pre_pd_exit = 6;		/* Empirical? */
+
+		ddr->timing_cfg_0 = (0
+			| ((act_pd_exit & 0x7) << 20)	/* ACT_PD_EXIT */
+			| ((pre_pd_exit & 0x7) << 16)	/* PRE_PD_EXIT */
+			| ((taxpd_clk & 0xf) << 8)	/* ODT_PD_EXIT */
+			| ((tmrd_clk & 0xf) << 0)	/* MRS_CYC */
+			);
+		debug("DDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
+
+	}
+
+
+	/*
+	 * Some Timing Config 1 values now.
+	 * Sneak Extended Refresh Recovery in here too.
+	 */
+
+	/*
+	 * For DDR I, WRREC(Twr) and WRTORD(Twtr) are not in SPD,
+	 * use conservative value.
+	 * For DDR II, they are bytes 36 and 37, in quarter nanos.
+	 */
+
+	if (spd.mem_type == SPD_MEMTYPE_DDR) {
+		twr_clk = 3;	/* Clocks */
+		twtr_clk = 1;	/* Clocks */
+	} else {
+		twr_clk = picos_to_clk(spd.twr * 250);
+		twtr_clk = picos_to_clk(spd.twtr * 250);
+	}
+
+	/*
+	 * Calculate Trfc, in picos.
+	 * DDR I:  Byte 42 straight up in ns.
+	 * DDR II: Byte 40 and 42 swizzled some, in ns.
+	 */
+	if (spd.mem_type == SPD_MEMTYPE_DDR) {
+		trfc = spd.trfc * 1000;		/* up to ps */
+	} else {
+		unsigned int byte40_table_ps[8] = {
+			0,
+			250,
+			330,
+			500,
+			660,
+			750,
+			0,
+			0
+		};
+
+		trfc = (((spd.trctrfc_ext & 0x1) * 256) + spd.trfc) * 1000
+			+ byte40_table_ps[(spd.trctrfc_ext >> 1) & 0x7];
+	}
+	trfc_clk = picos_to_clk(trfc);
+
+	/*
+	 * Trcd, Byte 29, from quarter nanos to ps and clocks.
+	 */
+	trcd_clk = picos_to_clk(spd.trcd * 250) & 0x7;
+
+	/*
+	 * Convert trfc_clk to DDR controller fields.  DDR I should
+	 * fit in the REFREC field (16-19) of TIMING_CFG_1, but the
+	 * 8548 controller has an extended REFREC field of three bits.
+	 * The controller automatically adds 8 clocks to this value,
+	 * so preadjust it down 8 first before splitting it up.
+	 */
+	trfc_low = (trfc_clk - 8) & 0xf;
+	trfc_high = ((trfc_clk - 8) >> 4) & 0x3;
+
+	/*
+	 * Sneak in some Extended Refresh Recovery.
+	 */
+	ddr->ext_refrec = (trfc_high << 16);
+	debug("DDR: ext_refrec = 0x%08x\n", ddr->ext_refrec);
+
+	ddr->timing_cfg_1 =
+	    (0
+	     | ((picos_to_clk(spd.trp * 250) & 0x07) << 28)	/* PRETOACT */
+	     | ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24)	/* ACTTOPRE */
+	     | (trcd_clk << 20)					/* ACTTORW */
+	     | (caslat_ctrl << 16)				/* CASLAT */
+	     | (trfc_low << 12)					/* REFEC */
+	     | ((twr_clk & 0x07) << 8)				/* WRRREC */
+	     | ((picos_to_clk(spd.trrd * 250) & 0x07) << 4)	/* ACTTOACT */
+	     | ((twtr_clk & 0x07) << 0)				/* WRTORD */
+	     );
+
+	debug("DDR: timing_cfg_1  = 0x%08x\n", ddr->timing_cfg_1);
+
+
+	/*
+	 * Timing_Config_2
+	 * Was: 0x00000800;
+	 */
+
+	/*
+	 * Additive Latency
+	 * For DDR I, 0.
+	 * For DDR II, with ODT enabled, use "a value" less than ACTTORW,
+	 * which comes from Trcd, and also note that:
+	 *	add_lat + caslat must be >= 4
+	 */
+	add_lat = 0;
+	if (spd.mem_type == SPD_MEMTYPE_DDR2
+	    && (odt_wr_cfg || odt_rd_cfg)
+	    && (caslat < 4)) {
+		add_lat = 4 - caslat;
+		if (add_lat >= trcd_clk) {
+			add_lat = trcd_clk - 1;
+		}
+	}
+
+	/*
+	 * Write Data Delay
+	 * Historically 0x2 == 4/8 clock delay.
+	 * Empirically, 0x3 == 6/8 clock delay is suggested for DDR I 266.
+	 */
+	wr_data_delay = 3;
+
+	/*
+	 * Write Latency
+	 * Read to Precharge
+	 * Minimum CKE Pulse Width.
+	 * Four Activate Window
+	 */
+	if (spd.mem_type == SPD_MEMTYPE_DDR) {
+		/*
+		 * This is a lie.  It should really be 1, but if it is
+		 * set to 1, bits overlap into the old controller's
+		 * otherwise unused ACSM field.  If we leave it 0, then
+		 * the HW will magically treat it as 1 for DDR 1.  Oh Yea.
+		 */
+		wr_lat = 0;
+
+		trtp_clk = 2;		/* By the book. */
+		cke_min_clk = 1;	/* By the book. */
+		four_act = 1;		/* By the book. */
+
+	} else {
+		wr_lat = caslat - 1;
+
+		/* Convert SPD value from quarter nanos to picos. */
+		trtp_clk = picos_to_clk(spd.trtp * 250);
+
+		cke_min_clk = 3;	/* By the book. */
+		four_act = picos_to_clk(37500);	/* By the book. 1k pages? */
+	}
+
+	ddr->timing_cfg_2 = (0
+		| ((add_lat & 0x7) << 28)		/* ADD_LAT */
+		| ((cpo & 0x1f) << 23)			/* CPO */
+		| ((wr_lat & 0x7) << 19)		/* WR_LAT */
+		| ((trtp_clk & 0x7) << 13)		/* RD_TO_PRE */
+		| ((wr_data_delay & 0x7) << 10)		/* WR_DATA_DELAY */
+		| ((cke_min_clk & 0x7) << 6)		/* CKE_PLS */
+		| ((four_act & 0x1f) << 0)		/* FOUR_ACT */
+		);
+
+	debug("DDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2);
+
+
+	/*
+	 * Determine the Mode Register Set.
+	 *
+	 * This is nominally part specific, but it appears to be
+	 * consistent for all DDR I devices, and for all DDR II devices.
+	 *
+	 *     caslat must be programmed
+	 *     burst length is always 4
+	 *     burst type is sequential
+	 *
+	 * For DDR I:
+	 *     operating mode is "normal"
+	 *
+	 * For DDR II:
+	 *     other stuff
+	 */
+
+	mode_caslat = 0;
+
+	/*
+	 * Table lookup from DDR I or II Device Operation Specs.
+	 */
+	if (spd.mem_type == SPD_MEMTYPE_DDR) {
+		if (1 <= caslat && caslat <= 4) {
+			unsigned char mode_caslat_table[4] = {
+				0x5,	/* 1.5 clocks */
+				0x2,	/* 2.0 clocks */
+				0x6,	/* 2.5 clocks */
+				0x3	/* 3.0 clocks */
+			};
+			mode_caslat = mode_caslat_table[caslat - 1];
+		} else {
+			puts("DDR I: Only CAS Latencies of 1.5, 2.0, "
+			     "2.5 and 3.0 clocks are supported.\n");
+			return 0;
+		}
+
+	} else {
+		if (2 <= caslat && caslat <= 5) {
+			mode_caslat = caslat;
+		} else {
+			puts("DDR II: Only CAS Latencies of 2.0, 3.0, "
+			     "4.0 and 5.0 clocks are supported.\n");
+			return 0;
+		}
+	}
+
+	/*
+	 * Encoded Burst Length of 4.
+	 */
+	burst_len = 2;			/* Fiat. */
+
+	if (spd.mem_type == SPD_MEMTYPE_DDR) {
+		twr_auto_clk = 0;	/* Historical */
+	} else {
+		/*
+		 * Determine tCK max in picos.  Grab tWR and convert to picos.
+		 * Auto-precharge write recovery is:
+		 *	WR = roundup(tWR_ns/tCKmax_ns).
+		 *
+		 * Ponder: Is twr_auto_clk different than twr_clk?
+		 */
+		tCKmax_ps = convert_bcd_tenths_to_cycle_time_ps(spd.tckmax);
+		twr_auto_clk = (spd.twr * 250 + tCKmax_ps - 1) / tCKmax_ps;
+	}
+
+	/*
+	 * Mode Reg in bits 16 ~ 31,
+	 * Extended Mode Reg 1 in bits 0 ~ 15.
+	 */
+	mode_odt_enable = 0x0;			/* Default disabled */
+	if (odt_wr_cfg || odt_rd_cfg) {
+		/*
+		 * Bits 6 and 2 in Extended MRS(1)
+		 * Bit 2 == 0x04 == 75 Ohm, with 2 DIMM modules.
+		 * Bit 6 == 0x40 == 150 Ohm, with 1 DIMM module.
+		 */
+		mode_odt_enable = 0x40;		/* 150 Ohm */
+	}
+
+	ddr->sdram_mode_1 =
+		(0
+		 | (add_lat << (16 + 3))	/* Additive Latency in EMRS1 */
+		 | (mode_odt_enable << 16)	/* ODT Enable in EMRS1 */
+		 | (twr_auto_clk << 9)		/* Write Recovery Autopre */
+		 | (mode_caslat << 4)		/* caslat */
+		 | (burst_len << 0)		/* Burst length */
+		 );
+
+	debug("DDR: sdram_mode   = 0x%08x\n", ddr->sdram_mode_1);
+
+	/*
+	 * Clear EMRS2 and EMRS3.
+	 */
+	ddr->sdram_mode_2 = 0;
+	debug("DDR: sdram_mode_2 = 0x%08x\n", ddr->sdram_mode_2);
+
+	/*
+	 * Determine Refresh Rate.
+	 */
+	refresh_clk = determine_refresh_rate(spd.refresh & 0x7);
+
+	/*
+	 * Set BSTOPRE to 0x100 for page mode
+	 * If auto-charge is used, set BSTOPRE = 0
+	 */
+	ddr->sdram_interval =
+		(0
+		 | (refresh_clk & 0x3fff) << 16
+		 | 0x100
+		 );
+	debug("DDR: sdram_interval = 0x%08x\n", ddr->sdram_interval);
+
+
+	/*
+	 * Is this an ECC DDR chip?
+	 * But don't mess with it if the DDR controller will init mem.
+	 */
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	if (spd.config == 0x02) {
+		ddr->err_disable = 0x0000000d;
+		ddr->err_sbe = 0x00ff0000;
+	}
+	debug("DDR: err_disable = 0x%08x\n", ddr->err_disable);
+	debug("DDR: err_sbe = 0x%08x\n", ddr->err_sbe);
+#endif
+
+	asm volatile("sync;isync");
+	udelay(500);
+
+	/*
+	 * SDRAM Cfg 2
+	 */
+
+	/*
+	 * When ODT is enabled, Chap 9 suggests asserting ODT to
+	 * internal IOs only during reads.
+	 */
+	odt_cfg = 0;
+	if (odt_rd_cfg | odt_wr_cfg) {
+		odt_cfg = 0x2;		/* ODT to IOs during reads */
+	}
+
+	/*
+	 * Try to use differential DQS with DDR II.
+	 */
+	if (spd.mem_type == SPD_MEMTYPE_DDR) {
+		dqs_cfg = 0;		/* No Differential DQS for DDR I */
+	} else {
+		dqs_cfg = 0x1;		/* Differential DQS for DDR II */
+	}
+
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/*
+	 * Use the DDR controller to auto initialize memory.
+	 */
+	d_init = 1;
+	ddr->sdram_data_init = CONFIG_MEM_INIT_VALUE;
+	debug("DDR: ddr_data_init = 0x%08x\n", ddr->sdram_data_init);
+#else
+	/*
+	 * Memory will be initialized via DMA, or not at all.
+	 */
+	d_init = 0;
+#endif
+
+	ddr->sdram_cfg_2 = (0
+			    | (dqs_cfg << 26)	/* Differential DQS */
+			    | (odt_cfg << 21)	/* ODT */
+			    | (d_init << 4)	/* D_INIT auto init DDR */
+			    );
+
+	debug("DDR: sdram_cfg_2  = 0x%08x\n", ddr->sdram_cfg_2);
+
+
+#ifdef MPC86xx_DDR_SDRAM_CLK_CNTL
+	/*
+	 * Setup the clock control.
+	 * SDRAM_CLK_CNTL[0] = Source synchronous enable == 1
+	 * SDRAM_CLK_CNTL[5-7] = Clock Adjust
+	 *	0110	3/4 cycle late
+	 *	0111	7/8 cycle late
+	 */
+	if (spd.mem_type == SPD_MEMTYPE_DDR)
+		clk_adjust = 0x6;
+	else
+		clk_adjust = 0x7;
+
+	ddr->sdram_clk_cntl = (0
+			       | 0x80000000
+			       | (clk_adjust << 23)
+			       );
+	debug("DDR: sdram_clk_cntl = 0x%08x\n", ddr->sdram_clk_cntl);
+#endif
+
+	/*
+	 * Figure out memory size in Megabytes.
+	 */
+	debug("# ranks = %d, rank_density = 0x%08lx\n", n_ranks, rank_density);
+	memsize = n_ranks * rank_density / 0x100000;
+	return memsize;
+}
+
+
+unsigned int enable_ddr(unsigned int ddr_num)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	spd_eeprom_t spd1,spd2;
+	volatile ccsr_ddr_t *ddr;
+	unsigned sdram_cfg_1;
+	unsigned char sdram_type, mem_type, config, mod_attr;
+	unsigned char d_init;
+	unsigned int no_dimm1=0, no_dimm2=0;
+
+	/* Set up pointer to enable the current ddr controller */
+	if (ddr_num == 1)
+		ddr = &immap->im_ddr1;
+	else
+		ddr = &immap->im_ddr2;
+
+	/*
+	 * Read both dimm slots and decide whether
+	 * or not to enable this controller.
+	 */
+	memset((void *)&spd1,0,sizeof(spd1));
+	memset((void *)&spd2,0,sizeof(spd2));
+
+	if (ddr_num == 1) {
+		CFG_READ_SPD(SPD_EEPROM_ADDRESS1,
+			     0, 1, (uchar *) &spd1, sizeof(spd1));
+		CFG_READ_SPD(SPD_EEPROM_ADDRESS2,
+			     0, 1, (uchar *) &spd2, sizeof(spd2));
+	} else {
+		CFG_READ_SPD(SPD_EEPROM_ADDRESS3,
+			     0, 1, (uchar *) &spd1, sizeof(spd1));
+		CFG_READ_SPD(SPD_EEPROM_ADDRESS4,
+			     0, 1, (uchar *) &spd2, sizeof(spd2));
+	}
+
+	/*
+	 * Check for supported memory module types.
+	 */
+	if (spd1.mem_type != SPD_MEMTYPE_DDR
+	    && spd1.mem_type != SPD_MEMTYPE_DDR2) {
+		no_dimm1 = 1;
+	} else {
+		debug("\nFound memory of type 0x%02lx  ",spd1.mem_type );
+		if (spd1.mem_type == SPD_MEMTYPE_DDR)
+			debug("DDR I\n");
+		else
+			debug("DDR II\n");
+	}
+
+	if (spd2.mem_type != SPD_MEMTYPE_DDR &&
+	    spd2.mem_type != SPD_MEMTYPE_DDR2) {
+		no_dimm2 = 1;
+	} else {
+		debug("\nFound memory of type 0x%02lx  ",spd2.mem_type );
+		if (spd2.mem_type == SPD_MEMTYPE_DDR)
+			debug("DDR I\n");
+		else
+			debug("DDR II\n");
+	}
+
+#ifdef CONFIG_DDR_INTERLEAVE
+	if (no_dimm1) {
+		printf("For interleaved operation memory modules need to be present in CS0 DIMM slots of both DDR controllers!\n");
+		return 0;
+	}
+#endif
+
+	/*
+	 * Memory is not present in DIMM1 and DIMM2 - so do not enable DDRn
+	 */
+	if (no_dimm1  && no_dimm2) {
+		printf("No memory modules found for DDR controller %d!!\n", ddr_num);
+		return 0;
+	} else {
+		mem_type = no_dimm2 ? spd1.mem_type : spd2.mem_type;
+
+		/*
+		 * Figure out the settings for the sdram_cfg register.
+		 * Build up the entire register in 'sdram_cfg' before
+		 * writing since the write into the register will
+		 * actually enable the memory controller; all settings
+		 * must be done before enabling.
+		 *
+		 * sdram_cfg[0]   = 1 (ddr sdram logic enable)
+		 * sdram_cfg[1]   = 1 (self-refresh-enable)
+		 * sdram_cfg[5:7] = (SDRAM type = DDR SDRAM)
+		 *			010 DDR 1 SDRAM
+		 *			011 DDR 2 SDRAM
+		 */
+		sdram_type = (mem_type == SPD_MEMTYPE_DDR) ? 2 : 3;
+		sdram_cfg_1 = (0
+			       | (1 << 31)		/* Enable */
+			       | (1 << 30)		/* Self refresh */
+			       | (sdram_type << 24)	/* SDRAM type */
+			       );
+
+		/*
+		 * sdram_cfg[3] = RD_EN - registered DIMM enable
+		 *   A value of 0x26 indicates micron registered
+		 *   DIMMS (micron.com)
+		 */
+		mod_attr = no_dimm2 ? spd1.mod_attr : spd2.mod_attr;
+		if (mem_type == SPD_MEMTYPE_DDR && mod_attr == 0x26) {
+			sdram_cfg_1 |= 0x10000000;		/* RD_EN */
+		}
+
+#if defined(CONFIG_DDR_ECC)
+
+		config = no_dimm2 ? spd1.config : spd2.config;
+
+		/*
+		 * If the user wanted ECC (enabled via sdram_cfg[2])
+		 */
+		if (config == 0x02) {
+			ddr->err_disable = 0x00000000;
+			asm volatile("sync;isync;");
+			ddr->err_sbe = 0x00ff0000;
+			ddr->err_int_en = 0x0000000d;
+			sdram_cfg_1 |= 0x20000000;		/* ECC_EN */
+		}
+#endif
+
+		/*
+		 * Set 1T or 2T timing based on 1 or 2 modules
+		 */
+		{
+			if (!(no_dimm1 || no_dimm2)) {
+				/*
+				 * 2T timing,because both DIMMS are present.
+				 * Enable 2T timing by setting sdram_cfg[16].
+				 */
+				sdram_cfg_1 |= 0x8000;		/* 2T_EN */
+			}
+		}
+
+		/*
+		 * 200 painful micro-seconds must elapse between
+		 * the DDR clock setup and the DDR config enable.
+		 */
+		udelay(200);
+
+		/*
+		 * Go!
+		 */
+		ddr->sdram_cfg_1 = sdram_cfg_1;
+
+		asm volatile("sync;isync");
+		udelay(500);
+
+		debug("DDR: sdram_cfg   = 0x%08x\n", ddr->sdram_cfg_1);
+
+
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+		d_init = 1;
+		debug("DDR: memory initializing\n");
+
+		/*
+		 * Poll until memory is initialized.
+		 * 512 Meg at 400 might hit this 200 times or so.
+		 */
+		while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
+			udelay(1000);
+		}
+		debug("DDR: memory initialized\n\n");
+#endif
+
+		debug("Enabled DDR Controller %d\n", ddr_num);
+		return 1;
+	}
+}
+
+
+long int
+spd_sdram(void)
+{
+	int memsize_ddr1_dimm1 = 0;
+	int memsize_ddr1_dimm2 = 0;
+	int memsize_ddr2_dimm1 = 0;
+	int memsize_ddr2_dimm2 = 0;
+	int memsize_total = 0;
+	int memsize_ddr1 = 0;
+	int memsize_ddr2 = 0;
+	unsigned int ddr1_enabled = 0;
+	unsigned int ddr2_enabled = 0;
+	unsigned int law_size_ddr1;
+	unsigned int law_size_ddr2;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1;
+	volatile ccsr_ddr_t *ddr2 = &immap->im_ddr2;
+	volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
+
+#ifdef CONFIG_DDR_INTERLEAVE
+	unsigned int law_size_interleaved;
+
+	memsize_ddr1_dimm1 = spd_init(SPD_EEPROM_ADDRESS1,
+				      1, 1,
+				      (unsigned int)memsize_total * 1024*1024);
+	memsize_total += memsize_ddr1_dimm1;
+
+	memsize_ddr2_dimm1 = spd_init(SPD_EEPROM_ADDRESS3,
+				      2, 1,
+				      (unsigned int)memsize_total * 1024*1024);
+	memsize_total += memsize_ddr2_dimm1;
+
+	if (memsize_ddr1_dimm1 != memsize_ddr2_dimm1) {
+		if (memsize_ddr1_dimm1 <  memsize_ddr2_dimm1)
+			memsize_total -= memsize_ddr1_dimm1;
+		else
+			memsize_total -= memsize_ddr2_dimm1;
+		debug("Total memory available for interleaving 0x%08lx\n",
+		      memsize_total * 1024 * 1024);
+		debug("Adjusting CS0_BNDS to account for unequal DIMM sizes in interleaved memory\n");
+		ddr1->cs0_bnds = ((memsize_total * 1024 * 1024) - 1) >> 24;
+		ddr2->cs0_bnds = ((memsize_total * 1024 * 1024) - 1) >> 24;
+		debug("DDR1: cs0_bnds   = 0x%08x\n", ddr1->cs0_bnds);
+		debug("DDR2: cs0_bnds   = 0x%08x\n", ddr2->cs0_bnds);
+	}
+
+	ddr1_enabled = enable_ddr(1);
+	ddr2_enabled = enable_ddr(2);
+
+	/*
+	 * Both controllers need to be enabled for interleaving.
+	 */
+	if (ddr1_enabled && ddr2_enabled) {
+		law_size_interleaved = 19 + __ilog2(memsize_total);
+
+		/*
+		 * Set up LAWBAR for DDR 1 space.
+		 */
+		mcm->lawbar1 = ((CFG_DDR_SDRAM_BASE >> 12) & 0xfffff);
+		mcm->lawar1 = (LAWAR_EN
+			       | LAWAR_TRGT_IF_DDR_INTERLEAVED
+			       | (LAWAR_SIZE & law_size_interleaved));
+		debug("DDR: LAWBAR1=0x%08x\n", mcm->lawbar1);
+		debug("DDR: LAWAR1=0x%08x\n", mcm->lawar1);
+		debug("Interleaved memory size is 0x%08lx\n", memsize_total);
+
+#ifdef	CONFIG_DDR_INTERLEAVE
+#if (CFG_PAGE_INTERLEAVING == 1)
+		printf("Page ");
+#elif (CFG_BANK_INTERLEAVING == 1)
+		printf("Bank ");
+#elif (CFG_SUPER_BANK_INTERLEAVING == 1)
+		printf("Super-bank ");
+#else
+		printf("Cache-line ");
+#endif
+#endif
+		printf("Interleaved");
+		return memsize_total * 1024 * 1024;
+	}  else {
+		printf("Interleaved memory not enabled - check CS0 DIMM slots for both controllers.\n");
+		return 0;
+	}
+
+#else
+	/*
+	 * Call spd_sdram() routine to init ddr1 - pass I2c address,
+	 * controller number, dimm number, and starting address.
+	 */
+	memsize_ddr1_dimm1 = spd_init(SPD_EEPROM_ADDRESS1,
+				      1, 1,
+				      (unsigned int)memsize_total * 1024*1024);
+	memsize_total += memsize_ddr1_dimm1;
+
+	memsize_ddr1_dimm2 = spd_init(SPD_EEPROM_ADDRESS2,
+				      1, 2,
+				      (unsigned int)memsize_total * 1024*1024);
+	memsize_total += memsize_ddr1_dimm2;
+
+	/*
+	 * Enable the DDR controller - pass ddr controller number.
+	 */
+	ddr1_enabled = enable_ddr(1);
+
+	/* Keep track of memory to be addressed by DDR1 */
+	memsize_ddr1 = memsize_ddr1_dimm1 + memsize_ddr1_dimm2;
+
+	/*
+	 * First supported LAW size is 16M, at LAWAR_SIZE_16M == 23.  Fnord.
+	 */
+	if (ddr1_enabled) {
+		law_size_ddr1 = 19 + __ilog2(memsize_ddr1);
+
+		/*
+		 * Set up LAWBAR for DDR 1 space.
+		 */
+		mcm->lawbar1 = ((CFG_DDR_SDRAM_BASE >> 12) & 0xfffff);
+		mcm->lawar1 = (LAWAR_EN
+			       | LAWAR_TRGT_IF_DDR1
+			       | (LAWAR_SIZE & law_size_ddr1));
+		debug("DDR: LAWBAR1=0x%08x\n", mcm->lawbar1);
+		debug("DDR: LAWAR1=0x%08x\n", mcm->lawar1);
+	}
+
+#if  (CONFIG_NUM_DDR_CONTROLLERS > 1)
+	memsize_ddr2_dimm1 = spd_init(SPD_EEPROM_ADDRESS3,
+				      2, 1,
+				      (unsigned int)memsize_total * 1024*1024);
+	memsize_total += memsize_ddr2_dimm1;
+
+	memsize_ddr2_dimm2 = spd_init(SPD_EEPROM_ADDRESS4,
+				      2, 2,
+				      (unsigned int)memsize_total * 1024*1024);
+	memsize_total += memsize_ddr2_dimm2;
+
+	ddr2_enabled = enable_ddr(2);
+
+	/* Keep track of memory to be addressed by DDR2 */
+	memsize_ddr2 = memsize_ddr2_dimm1 + memsize_ddr2_dimm2;
+
+	if (ddr2_enabled) {
+		law_size_ddr2 = 19 + __ilog2(memsize_ddr2);
+
+		/*
+		 * Set up LAWBAR for DDR 2 space.
+		 */
+		if (ddr1_enabled)
+			mcm->lawbar8 = (((memsize_ddr1 * 1024 * 1024) >> 12)
+					& 0xfffff);
+		else
+			mcm->lawbar8 = ((CFG_DDR_SDRAM_BASE >> 12) & 0xfffff);
+
+		mcm->lawar8 = (LAWAR_EN
+			       | LAWAR_TRGT_IF_DDR2
+			       | (LAWAR_SIZE & law_size_ddr2));
+		debug("\nDDR: LAWBAR8=0x%08x\n", mcm->lawbar8);
+		debug("DDR: LAWAR8=0x%08x\n", mcm->lawar8);
+	}
+#endif /* CONFIG_NUM_DDR_CONTROLLERS > 1 */
+
+	debug("\nMemory sizes are DDR1 = 0x%08lx, DDR2 = 0x%08lx\n",
+	      memsize_ddr1, memsize_ddr2);
+
+	/*
+	 * If neither DDR controller is enabled return 0.
+	 */
+	if (!ddr1_enabled && !ddr2_enabled)
+		return 0;
+
+	printf("Non-interleaved");
+	return memsize_total * 1024 * 1024;
+
+#endif /* CONFIG_DDR_INTERLEAVE */
+}
+
+
+#endif /* CONFIG_SPD_EEPROM */
+
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+
+/*
+ * Initialize all of memory for ECC, then enable errors.
+ */
+
+void
+ddr_enable_ecc(unsigned int dram_size)
+{
+	uint *p = 0;
+	uint i = 0;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_ddr_t *ddr1= &immap->im_ddr1;
+
+	dma_init();
+
+	for (*p = 0; p < (uint *)(8 * 1024); p++) {
+		if (((unsigned int)p & 0x1f) == 0) {
+			ppcDcbz((unsigned long) p);
+		}
+		*p = (unsigned int)CONFIG_MEM_INIT_VALUE;
+		if (((unsigned int)p & 0x1c) == 0x1c) {
+			ppcDcbf((unsigned long) p);
+		}
+	}
+
+	dma_xfer((uint *)0x002000, 0x002000, (uint *)0); /* 8K */
+	dma_xfer((uint *)0x004000, 0x004000, (uint *)0); /* 16K */
+	dma_xfer((uint *)0x008000, 0x008000, (uint *)0); /* 32K */
+	dma_xfer((uint *)0x010000, 0x010000, (uint *)0); /* 64K */
+	dma_xfer((uint *)0x020000, 0x020000, (uint *)0); /* 128k */
+	dma_xfer((uint *)0x040000, 0x040000, (uint *)0); /* 256k */
+	dma_xfer((uint *)0x080000, 0x080000, (uint *)0); /* 512k */
+	dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */
+	dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */
+	dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */
+
+	for (i = 1; i < dram_size / 0x800000; i++) {
+		dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0);
+	}
+
+	/*
+	 * Enable errors for ECC.
+	 */
+	debug("DMA DDR: err_disable = 0x%08x\n", ddr1->err_disable);
+	ddr1->err_disable = 0x00000000;
+	asm volatile("sync;isync");
+	debug("DMA DDR: err_disable = 0x%08x\n", ddr1->err_disable);
+}
+
+#endif	/* CONFIG_DDR_ECC  && ! CONFIG_ECC_INIT_VIA_DDRCONTROLLER */
diff --git a/cpu/mpc86xx/speed.c b/cpu/mpc86xx/speed.c
new file mode 100644
index 0000000..312ca12
--- /dev/null
+++ b/cpu/mpc86xx/speed.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * Jeff Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc86xx.h>
+#include <asm/processor.h>
+
+
+void get_sys_info(sys_info_t *sysInfo)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	uint plat_ratio, e600_ratio;
+
+	plat_ratio = (gur->porpllsr) & 0x0000003e;
+	plat_ratio >>= 1;
+
+	switch (plat_ratio) {
+	case 0x0:
+		sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ;
+		break;
+	case 0x02:
+	case 0x03:
+	case 0x04:
+	case 0x05:
+	case 0x06:
+	case 0x08:
+	case 0x09:
+	case 0x0a:
+	case 0x0c:
+	case 0x10:
+		sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
+		break;
+	default:
+		sysInfo->freqSystemBus = 0;
+		break;
+	}
+
+	e600_ratio = (gur->porpllsr) & 0x003f0000;
+	e600_ratio >>= 16;
+
+	switch (e600_ratio) {
+	case 0x10:
+		sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus;
+		break;
+	case 0x19:
+		sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus / 2;
+		break;
+	case 0x20:
+		sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus;
+		break;
+	case 0x39:
+		sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus / 2;
+		break;
+	case 0x28:
+		sysInfo->freqProcessor = 4 * sysInfo->freqSystemBus;
+		break;
+	case 0x1d:
+		sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus / 2;
+		break;
+	default:
+		sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus;
+		break;
+	}
+}
+
+
+/*
+ * Measure CPU clock speed (core clock GCLK1, GCLK2)
+ * (Approx. GCLK frequency in Hz)
+ */
+
+int get_clocks(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	sys_info_t sys_info;
+
+	get_sys_info(&sys_info);
+	gd->cpu_clk = sys_info.freqProcessor;
+	gd->bus_clk = sys_info.freqSystemBus;
+
+	if (gd->cpu_clk != 0)
+		return 0;
+	else
+		return 1;
+}
+
+
+/*
+ * get_bus_freq
+ *	Return system bus freq in Hz
+ */
+
+ulong get_bus_freq(ulong dummy)
+{
+	ulong val;
+	sys_info_t sys_info;
+
+	get_sys_info(&sys_info);
+	val = sys_info.freqSystemBus;
+
+	return val;
+}
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
new file mode 100644
index 0000000..7406fe2
--- /dev/null
+++ b/cpu/mpc86xx/start.S
@@ -0,0 +1,1226 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * Srikanth Srinivasan <srikanth.srinivaan@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*  U-Boot - Startup Code for 86xx PowerPC based Embedded Boards
+ *
+ *
+ *  The processor starts at 0xfff00100 and the code is executed
+ *  from flash. The code is organized to be at an other address
+ *  in memory, but as long we don't jump around before relocating.
+ *  board_init lies at a quite high address and when the cpu has
+ *  jumped there, everything is ok.
+ */
+#include <config.h>
+#include <mpc86xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef	CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+/* We don't want the  MMU yet.
+*/
+#undef	MSR_KERNEL
+/* Machine Check and Recoverable Interr. */
+#define MSR_KERNEL ( MSR_ME | MSR_RI )
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r14 to access the GOT
+ */
+	START_GOT
+	GOT_ENTRY(_GOT2_TABLE_)
+	GOT_ENTRY(_FIXUP_TABLE_)
+
+	GOT_ENTRY(_start)
+	GOT_ENTRY(_start_of_vectors)
+	GOT_ENTRY(_end_of_vectors)
+	GOT_ENTRY(transfer_to_handler)
+
+	GOT_ENTRY(__init_end)
+	GOT_ENTRY(_end)
+	GOT_ENTRY(__bss_start)
+	END_GOT
+
+/*
+ * r3 - 1st arg to board_init(): IMMP pointer
+ * r4 - 2nd arg to board_init(): boot flag
+ */
+	.text
+	.long	0x27051956		/* U-Boot Magic Number */
+	.globl	version_string
+version_string:
+	.ascii	U_BOOT_VERSION
+	.ascii	" (", __DATE__, " - ", __TIME__, ")"
+	.ascii	CONFIG_IDENT_STRING, "\0"
+
+	. = EXC_OFF_SYS_RESET
+	.globl	_start
+_start:
+	li	r21, BOOTFLAG_COLD	/* Normal Power-On: Boot from FLASH */
+	b	boot_cold
+	sync
+
+	. = EXC_OFF_SYS_RESET + 0x10
+
+	.globl	_start_warm
+_start_warm:
+	li	r21, BOOTFLAG_WARM	/* Software reboot */
+	b	boot_warm
+	sync
+
+	/* the boot code is located below the exception table */
+
+	.globl	_start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+	STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. */
+	STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+	STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+	STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+	. = 0x600
+Alignment:
+	EXCEPTION_PROLOG
+	mfspr	r4,DAR
+	stw	r4,_DAR(r21)
+	mfspr	r5,DSISR
+	stw	r5,_DSISR(r21)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	li	r20,MSR_KERNEL
+	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */
+	lwz	r6,GOT(transfer_to_handler)
+	mtlr	r6
+	blrl
+.L_Alignment:
+	.long	AlignmentException - _start + EXC_OFF_SYS_RESET
+	.long	int_return - _start + EXC_OFF_SYS_RESET
+
+/* Program check exception */
+	. = 0x700
+ProgramCheck:
+	EXCEPTION_PROLOG
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	li	r20,MSR_KERNEL
+	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */
+	lwz	r6,GOT(transfer_to_handler)
+	mtlr	r6
+	blrl
+.L_ProgramCheck:
+	.long	ProgramCheckException - _start + EXC_OFF_SYS_RESET
+	.long	int_return - _start + EXC_OFF_SYS_RESET
+
+	STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+	/* I guess we could implement decrementer, and may have
+	 * to someday for timekeeping.
+	 */
+	STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+	STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+	STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+	STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+	STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+	STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+	STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+	STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
+	STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+	STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+	STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
+	STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
+	STD_EXCEPTION(0x1500, Reserved5, UnknownException)
+	STD_EXCEPTION(0x1600, Reserved6, UnknownException)
+	STD_EXCEPTION(0x1700, Reserved7, UnknownException)
+	STD_EXCEPTION(0x1800, Reserved8, UnknownException)
+	STD_EXCEPTION(0x1900, Reserved9, UnknownException)
+	STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
+	STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
+	STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
+	STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
+	STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
+	STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
+
+	.globl	_end_of_vectors
+_end_of_vectors:
+
+	. = 0x2000
+
+boot_cold:
+boot_warm:
+
+	/* if this is a multi-core system we need to check which cpu
+	 * this is, if it is not cpu 0 send the cpu to the linux reset
+	 * vector */
+#if (CONFIG_NUM_CPUS > 1)
+	mfspr	r0, MSSCR0
+	andi.	r0, r0, 0x0020
+	rlwinm	r0,r0,27,31,31
+	mtspr	PIR, r0
+	beq	1f
+
+	bl	secondary_cpu_setup
+#endif
+
+	/* disable everything */
+1:	li	r0, 0
+	mtspr	HID0, r0
+	sync
+	mtmsr	0
+	bl	invalidate_bats
+	sync
+
+#ifdef CFG_L2
+	/* init the L2 cache */
+	addis	r3, r0, L2_INIT@h
+	ori	r3, r3, L2_INIT@l
+	mtspr	l2cr, r3
+	/* invalidate the L2 cache */
+	bl	l2cache_invalidate
+	sync
+#endif
+
+	/*
+	 * Calculate absolute address in FLASH and jump there
+	 *------------------------------------------------------*/
+	lis	r3, CFG_MONITOR_BASE@h
+	ori	r3, r3, CFG_MONITOR_BASE@l
+	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
+	mtlr	r3
+	blr
+
+in_flash:
+	/* let the C-code set up the rest			*/
+	/*							*/
+	/* Be careful to keep code relocatable !		*/
+	/*------------------------------------------------------*/
+	/* perform low-level init */
+
+	/* enable extended addressing */
+	bl	enable_ext_addr
+
+	/* setup the bats */
+	bl	setup_bats
+	sync
+
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+	/* setup ccsrbar */
+	bl	setup_ccsrbar
+#endif
+
+	/* Fix for SMP linux - Changing arbitration to round-robin */
+	lis	r3, CFG_CCSRBAR@h
+	ori	r3, r3, 0x1000
+	xor	r4, r4, r4
+	li	r4, 0x1000
+	stw	r4, 0(r3)
+
+	/* setup the law entries */
+	bl	law_entry
+	sync
+
+	/* Don't use this feature due to bug in 8641D PD4 */
+	/* Disable ERD_DIS */
+	lis	r3, CFG_CCSRBAR@h
+	ori	r3, r3, 0x1008
+	lwz	r4, 0(r3)
+	oris	r4, r4, 0x4000
+	stw	r4, 0(r3)
+	sync
+
+#if (EMULATOR_RUN == 1)
+	/* On the emulator we want to adjust these ASAP */
+	/* otherwise things are sloooow */
+	/* Setup OR0 (LALE FIX)*/
+	lis	r3, CFG_CCSRBAR@h
+	ori	r3, r3, 0x5004
+	li	r4, 0x0FF3
+	stw	r4, 0(r3)
+	sync
+
+	/* Setup LCRR */
+	lis	r3, CFG_CCSRBAR@h
+	ori	r3, r3, 0x50D4
+	lis	r4, 0x8000
+	ori	r4, r4, 0x0002
+	stw	r4, 0(r3)
+	sync
+#endif
+#if 1
+	/* make sure timer enabled in guts register too */
+	lis	r3, CFG_CCSRBAR@h
+	oris	r3,r3, 0xE
+	ori	r3,r3,0x0070
+	lwz	r4, 0(r3)
+	lis	r5,0xFFFC
+	ori	r5,r5,0x5FFF
+	and	r4,r4,r5
+	stw	r4,0(r3)
+#endif
+	/*
+	 * Cache must be enabled here for stack-in-cache trick.
+	 * This means we need to enable the BATS.
+	 * Cache should be turned on after BATs, since by default
+	 * everything is write-through.
+	 */
+
+	/* enable address translation */
+	bl	enable_addr_trans
+	sync
+
+	/* enable and invalidate the data cache */
+/*	bl	l1dcache_enable */
+	bl	dcache_enable
+	sync
+
+#if 1
+	bl	icache_enable
+#endif
+
+#ifdef CFG_INIT_RAM_LOCK
+	bl	lock_ram_in_cache
+	sync
+#endif
+
+	/* set up the stack pointer in our newly created
+	 * cache-ram (r1) */
+	lis	r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@h
+	ori	r1, r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@l
+
+	li	r0, 0		/* Make room for stack frame header and */
+	stwu	r0, -4(r1)	/* clear final stack frame so that	*/
+	stwu	r0, -4(r1)	/* stack backtraces terminate cleanly	*/
+
+	GET_GOT			/* initialize GOT access	*/
+
+	/* run low-level CPU init code	   (from Flash) */
+	bl	cpu_init_f
+	sync
+
+#ifdef	RUN_DIAG
+
+	/* Sri:	 Code to run the diagnostic automatically */
+
+	/* Load PX_AUX register address in r4 */
+	lis	r4, 0xf810
+	ori	r4, r4, 0x6
+	/* Load contents of PX_AUX in r3 bits 24 to 31*/
+	lbz	r3, 0(r4)
+
+	/* Mask and obtain the bit in r3 */
+	rlwinm. r3, r3, 0, 24, 24
+	/* If not zero, jump and continue with u-boot */
+	bne	diag_done
+
+	/* Load back contents of PX_AUX in r3 bits 24 to 31 */
+	lbz	r3, 0(r4)
+	/* Set the MSB of the register value */
+	ori	r3, r3, 0x80
+	/* Write value in r3 back to PX_AUX */
+	stb	r3, 0(r4)
+
+	/* Get the address to jump to in r3*/
+	lis	r3, CFG_DIAG_ADDR@h
+	ori	r3, r3, CFG_DIAG_ADDR@l
+
+	/* Load the LR with the branch address */
+	mtlr	r3
+
+	/* Branch to diagnostic */
+	blr
+
+diag_done:
+#endif
+
+/*	bl	l2cache_enable */
+	mr	r3, r21
+
+	/* r3: BOOTFLAG */
+	/* run 1st part of board init code (from Flash)	  */
+	bl	board_init_f
+	sync
+
+	/* NOTREACHED */
+
+	.globl	invalidate_bats
+invalidate_bats:
+
+	/* invalidate BATs */
+	mtspr	IBAT0U, r0
+	mtspr	IBAT1U, r0
+	mtspr	IBAT2U, r0
+	mtspr	IBAT3U, r0
+	mtspr	IBAT4U, r0
+	mtspr	IBAT5U, r0
+	mtspr	IBAT6U, r0
+	mtspr	IBAT7U, r0
+
+	isync
+	mtspr	DBAT0U, r0
+	mtspr	DBAT1U, r0
+	mtspr	DBAT2U, r0
+	mtspr	DBAT3U, r0
+	mtspr	DBAT4U, r0
+	mtspr	DBAT5U, r0
+	mtspr	DBAT6U, r0
+	mtspr	DBAT7U, r0
+
+	isync
+	sync
+	blr
+
+
+	/* setup_bats - set them up to some initial state */
+	.globl	setup_bats
+setup_bats:
+
+	addis	r0, r0, 0x0000
+
+	/* IBAT 0 */
+	addis	r4, r0, CFG_IBAT0L@h
+	ori	r4, r4, CFG_IBAT0L@l
+	addis	r3, r0, CFG_IBAT0U@h
+	ori	r3, r3, CFG_IBAT0U@l
+	mtspr	IBAT0L, r4
+	mtspr	IBAT0U, r3
+	isync
+
+	/* DBAT 0 */
+	addis	r4, r0, CFG_DBAT0L@h
+	ori	r4, r4, CFG_DBAT0L@l
+	addis	r3, r0, CFG_DBAT0U@h
+	ori	r3, r3, CFG_DBAT0U@l
+	mtspr	DBAT0L, r4
+	mtspr	DBAT0U, r3
+	isync
+
+	/* IBAT 1 */
+	addis	r4, r0, CFG_IBAT1L@h
+	ori	r4, r4, CFG_IBAT1L@l
+	addis	r3, r0, CFG_IBAT1U@h
+	ori	r3, r3, CFG_IBAT1U@l
+	mtspr	IBAT1L, r4
+	mtspr	IBAT1U, r3
+	isync
+
+	/* DBAT 1 */
+	addis	r4, r0, CFG_DBAT1L@h
+	ori	r4, r4, CFG_DBAT1L@l
+	addis	r3, r0, CFG_DBAT1U@h
+	ori	r3, r3, CFG_DBAT1U@l
+	mtspr	DBAT1L, r4
+	mtspr	DBAT1U, r3
+	isync
+
+	/* IBAT 2 */
+	addis	r4, r0, CFG_IBAT2L@h
+	ori	r4, r4, CFG_IBAT2L@l
+	addis	r3, r0, CFG_IBAT2U@h
+	ori	r3, r3, CFG_IBAT2U@l
+	mtspr	IBAT2L, r4
+	mtspr	IBAT2U, r3
+	isync
+
+	/* DBAT 2 */
+	addis	r4, r0, CFG_DBAT2L@h
+	ori	r4, r4, CFG_DBAT2L@l
+	addis	r3, r0, CFG_DBAT2U@h
+	ori	r3, r3, CFG_DBAT2U@l
+	mtspr	DBAT2L, r4
+	mtspr	DBAT2U, r3
+	isync
+
+	/* IBAT 3 */
+	addis	r4, r0, CFG_IBAT3L@h
+	ori	r4, r4, CFG_IBAT3L@l
+	addis	r3, r0, CFG_IBAT3U@h
+	ori	r3, r3, CFG_IBAT3U@l
+	mtspr	IBAT3L, r4
+	mtspr	IBAT3U, r3
+	isync
+
+	/* DBAT 3 */
+	addis	r4, r0, CFG_DBAT3L@h
+	ori	r4, r4, CFG_DBAT3L@l
+	addis	r3, r0, CFG_DBAT3U@h
+	ori	r3, r3, CFG_DBAT3U@l
+	mtspr	DBAT3L, r4
+	mtspr	DBAT3U, r3
+	isync
+
+	/* IBAT 4 */
+	addis	r4, r0, CFG_IBAT4L@h
+	ori	r4, r4, CFG_IBAT4L@l
+	addis	r3, r0, CFG_IBAT4U@h
+	ori	r3, r3, CFG_IBAT4U@l
+	mtspr	IBAT4L, r4
+	mtspr	IBAT4U, r3
+	isync
+
+	/* DBAT 4 */
+	addis	r4, r0, CFG_DBAT4L@h
+	ori	r4, r4, CFG_DBAT4L@l
+	addis	r3, r0, CFG_DBAT4U@h
+	ori	r3, r3, CFG_DBAT4U@l
+	mtspr	DBAT4L, r4
+	mtspr	DBAT4U, r3
+	isync
+
+	/* IBAT 5 */
+	addis	r4, r0, CFG_IBAT5L@h
+	ori	r4, r4, CFG_IBAT5L@l
+	addis	r3, r0, CFG_IBAT5U@h
+	ori	r3, r3, CFG_IBAT5U@l
+	mtspr	IBAT5L, r4
+	mtspr	IBAT5U, r3
+	isync
+
+	/* DBAT 5 */
+	addis	r4, r0, CFG_DBAT5L@h
+	ori	r4, r4, CFG_DBAT5L@l
+	addis	r3, r0, CFG_DBAT5U@h
+	ori	r3, r3, CFG_DBAT5U@l
+	mtspr	DBAT5L, r4
+	mtspr	DBAT5U, r3
+	isync
+
+	/* IBAT 6 */
+	addis	r4, r0, CFG_IBAT6L@h
+	ori	r4, r4, CFG_IBAT6L@l
+	addis	r3, r0, CFG_IBAT6U@h
+	ori	r3, r3, CFG_IBAT6U@l
+	mtspr	IBAT6L, r4
+	mtspr	IBAT6U, r3
+	isync
+
+	/* DBAT 6 */
+	addis	r4, r0, CFG_DBAT6L@h
+	ori	r4, r4, CFG_DBAT6L@l
+	addis	r3, r0, CFG_DBAT6U@h
+	ori	r3, r3, CFG_DBAT6U@l
+	mtspr	DBAT6L, r4
+	mtspr	DBAT6U, r3
+	isync
+
+	/* IBAT 7 */
+	addis	r4, r0, CFG_IBAT7L@h
+	ori	r4, r4, CFG_IBAT7L@l
+	addis	r3, r0, CFG_IBAT7U@h
+	ori	r3, r3, CFG_IBAT7U@l
+	mtspr	IBAT7L, r4
+	mtspr	IBAT7U, r3
+	isync
+
+	/* DBAT 7 */
+	addis	r4, r0, CFG_DBAT7L@h
+	ori	r4, r4, CFG_DBAT7L@l
+	addis	r3, r0, CFG_DBAT7U@h
+	ori	r3, r3, CFG_DBAT7U@l
+	mtspr	DBAT7L, r4
+	mtspr	DBAT7U, r3
+	isync
+
+1:
+	addis	r3, 0, 0x0000
+	addis	r5, 0, 0x4	/* upper bound of 0x00040000 for 7400/750 */
+	isync
+
+tlblp:
+	tlbie	r3
+	sync
+	addi	r3, r3, 0x1000
+	cmp	0, 0, r3, r5
+	blt tlblp
+
+	blr
+
+	.globl enable_addr_trans
+enable_addr_trans:
+	/* enable address translation */
+	mfmsr	r5
+	ori	r5, r5, (MSR_IR | MSR_DR)
+	mtmsr	r5
+	isync
+	blr
+
+	.globl disable_addr_trans
+disable_addr_trans:
+	/* disable address translation */
+	mflr	r4
+	mfmsr	r3
+	andi.	r0, r3, (MSR_IR | MSR_DR)
+	beqlr
+	andc	r3, r3, r0
+	mtspr	SRR0, r4
+	mtspr	SRR1, r3
+	rfi
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+	.globl	transfer_to_handler
+transfer_to_handler:
+	stw	r22,_NIP(r21)
+	lis	r22,MSR_POW@h
+	andc	r23,r23,r22
+	stw	r23,_MSR(r21)
+	SAVE_GPR(7, r21)
+	SAVE_4GPRS(8, r21)
+	SAVE_8GPRS(12, r21)
+	SAVE_8GPRS(24, r21)
+	mflr	r23
+	andi.	r24,r23,0x3f00		/* get vector offset */
+	stw	r24,TRAP(r21)
+	li	r22,0
+	stw	r22,RESULT(r21)
+	mtspr	SPRG2,r22		/* r1 is now kernel sp */
+	lwz	r24,0(r23)		/* virtual address of handler */
+	lwz	r23,4(r23)		/* where to go when done */
+	mtspr	SRR0,r24
+	mtspr	SRR1,r20
+	mtlr	r23
+	SYNC
+	rfi				/* jump to handler, enable MMU */
+
+int_return:
+	mfmsr	r28		/* Disable interrupts */
+	li	r4,0
+	ori	r4,r4,MSR_EE
+	andc	r28,r28,r4
+	SYNC			/* Some chip revs need this... */
+	mtmsr	r28
+	SYNC
+	lwz	r2,_CTR(r1)
+	lwz	r0,_LINK(r1)
+	mtctr	r2
+	mtlr	r0
+	lwz	r2,_XER(r1)
+	lwz	r0,_CCR(r1)
+	mtspr	XER,r2
+	mtcrf	0xFF,r0
+	REST_10GPRS(3, r1)
+	REST_10GPRS(13, r1)
+	REST_8GPRS(23, r1)
+	REST_GPR(31, r1)
+	lwz	r2,_NIP(r1)	/* Restore environment */
+	lwz	r0,_MSR(r1)
+	mtspr	SRR0,r2
+	mtspr	SRR1,r0
+	lwz	r0,GPR0(r1)
+	lwz	r2,GPR2(r1)
+	lwz	r1,GPR1(r1)
+	SYNC
+	rfi
+
+	.globl	dc_read
+dc_read:
+	blr
+
+	.globl get_pvr
+get_pvr:
+	mfspr	r3, PVR
+	blr
+
+	.globl get_svr
+get_svr:
+	mfspr	r3, SVR
+	blr
+
+
+/*
+ * Function:	in8
+ * Description:	Input 8 bits
+ */
+	.globl	in8
+in8:
+	lbz	r3,0x0000(r3)
+	blr
+
+/*
+ * Function:	out8
+ * Description:	Output 8 bits
+ */
+	.globl	out8
+out8:
+	stb	r4,0x0000(r3)
+	blr
+
+/*
+ * Function:	out16
+ * Description:	Output 16 bits
+ */
+	.globl	out16
+out16:
+	sth	r4,0x0000(r3)
+	blr
+
+/*
+ * Function:	out16r
+ * Description:	Byte reverse and output 16 bits
+ */
+	.globl	out16r
+out16r:
+	sthbrx	r4,r0,r3
+	blr
+
+/*
+ * Function:	out32
+ * Description:	Output 32 bits
+ */
+	.globl	out32
+out32:
+	stw	r4,0x0000(r3)
+	blr
+
+/*
+ * Function:	out32r
+ * Description:	Byte reverse and output 32 bits
+ */
+	.globl	out32r
+out32r:
+	stwbrx	r4,r0,r3
+	blr
+
+/*
+ * Function:	in16
+ * Description:	Input 16 bits
+ */
+	.globl	in16
+in16:
+	lhz	r3,0x0000(r3)
+	blr
+
+/*
+ * Function:	in16r
+ * Description:	Input 16 bits and byte reverse
+ */
+	.globl	in16r
+in16r:
+	lhbrx	r3,r0,r3
+	blr
+
+/*
+ * Function:	in32
+ * Description:	Input 32 bits
+ */
+	.globl	in32
+in32:
+	lwz	3,0x0000(3)
+	blr
+
+/*
+ * Function:	in32r
+ * Description:	Input 32 bits and byte reverse
+ */
+	.globl	in32r
+in32r:
+	lwbrx	r3,r0,r3
+	blr
+
+/*
+ * Function:	ppcDcbf
+ * Description:	Data Cache block flush
+ * Input:	r3 = effective address
+ * Output:	none.
+ */
+	.globl	ppcDcbf
+ppcDcbf:
+	dcbf	r0,r3
+	blr
+
+/*
+ * Function:	ppcDcbi
+ * Description:	Data Cache block Invalidate
+ * Input:	r3 = effective address
+ * Output:	none.
+ */
+	.globl	ppcDcbi
+ppcDcbi:
+	dcbi	r0,r3
+	blr
+
+/*
+ * Function:	ppcDcbz
+ * Description:	Data Cache block zero.
+ * Input:	r3 = effective address
+ * Output:	none.
+ */
+	.globl	ppcDcbz
+ppcDcbz:
+	dcbz	r0,r3
+	blr
+
+/*
+ * Function:	ppcSync
+ * Description:	Processor Synchronize
+ * Input:	none.
+ * Output:	none.
+ */
+	.globl	ppcSync
+ppcSync:
+	sync
+	blr
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+	.globl	relocate_code
+relocate_code:
+
+	mr	r1,  r3		/* Set new stack pointer		*/
+	mr	r9,  r4		/* Save copy of Global Data pointer	*/
+	mr	r29, r9		/* Save for DECLARE_GLOBAL_DATA_PTR	*/
+	mr	r10, r5		/* Save copy of Destination Address	*/
+
+	mr	r3,  r5				/* Destination Address	*/
+	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CFG_MONITOR_BASE@l
+	lwz	r5, GOT(__init_end)
+	sub	r5, r5, r4
+	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size	*/
+
+	/*
+	 * Fix GOT pointer:
+	 *
+	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 *
+	 * Offset:
+	 */
+	sub	r15, r10, r4
+
+	/* First our own GOT */
+	add	r14, r14, r15
+	/* then the one used by the C code */
+	add	r30, r30, r15
+
+	/*
+	 * Now relocate code
+	 */
+#ifdef CONFIG_ECC
+	bl	board_relocate_rom
+	sync
+	mr	r3, r10				/* Destination Address	*/
+	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CFG_MONITOR_BASE@l
+	lwz	r5, GOT(__init_end)
+	sub	r5, r5, r4
+	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size	*/
+#else
+	cmplw	cr1,r3,r4
+	addi	r0,r5,3
+	srwi.	r0,r0,2
+	beq	cr1,4f		/* In place copy is not necessary	*/
+	beq	7f		/* Protect against 0 count		*/
+	mtctr	r0
+	bge	cr1,2f
+
+	la	r8,-4(r4)
+	la	r7,-4(r3)
+1:	lwzu	r0,4(r8)
+	stwu	r0,4(r7)
+	bdnz	1b
+	b	4f
+
+2:	slwi	r0,r0,2
+	add	r8,r4,r0
+	add	r7,r3,r0
+3:	lwzu	r0,-4(r8)
+	stwu	r0,-4(r7)
+	bdnz	3b
+#endif
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4:	cmpwi	r6,0
+	add	r5,r3,r5
+	beq	7f		/* Always flush prefetch queue in any case */
+	subi	r0,r6,1
+	andc	r3,r3,r0
+	mr	r4,r3
+5:	dcbst	0,r4
+	add	r4,r4,r6
+	cmplw	r4,r5
+	blt	5b
+	sync			/* Wait for all dcbst to complete on bus */
+	mr	r4,r3
+6:	icbi	0,r4
+	add	r4,r4,r6
+	cmplw	r4,r5
+	blt	6b
+7:	sync			/* Wait for all icbi to complete on bus */
+	isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+	addi	r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+	mtlr	r0
+	blr
+
+in_ram:
+#ifdef CONFIG_ECC
+	bl	board_init_ecc
+#endif
+	/*
+	 * Relocation Function, r14 point to got2+0x8000
+	 *
+	 * Adjust got2 pointers, no need to check for 0, this code
+	 * already puts a few entries in the table.
+	 */
+	li	r0,__got2_entries@sectoff@l
+	la	r3,GOT(_GOT2_TABLE_)
+	lwz	r11,GOT(_GOT2_TABLE_)
+	mtctr	r0
+	sub	r11,r3,r11
+	addi	r3,r3,-4
+1:	lwzu	r0,4(r3)
+	add	r0,r0,r11
+	stw	r0,0(r3)
+	bdnz	1b
+
+	/*
+	 * Now adjust the fixups and the pointers to the fixups
+	 * in case we need to move ourselves again.
+	 */
+2:	li	r0,__fixup_entries@sectoff@l
+	lwz	r3,GOT(_FIXUP_TABLE_)
+	cmpwi	r0,0
+	mtctr	r0
+	addi	r3,r3,-4
+	beq	4f
+3:	lwzu	r4,4(r3)
+	lwzux	r0,r4,r11
+	add	r0,r0,r11
+	stw	r10,0(r3)
+	stw	r0,0(r4)
+	bdnz	3b
+4:
+/* clear_bss: */
+	/*
+	 * Now clear BSS segment
+	 */
+	lwz	r3,GOT(__bss_start)
+	lwz	r4,GOT(_end)
+
+	cmplw	0, r3, r4
+	beq	6f
+
+	li	r0, 0
+5:
+	stw	r0, 0(r3)
+	addi	r3, r3, 4
+	cmplw	0, r3, r4
+	bne	5b
+6:
+	mr	r3, r9		/* Init Date pointer		*/
+	mr	r4, r10		/* Destination Address		*/
+	bl	board_init_r
+
+	/* not reached - end relocate_code */
+/*-----------------------------------------------------------------------*/
+
+	/*
+	 * Copy exception vector code to low memory
+	 *
+	 * r3: dest_addr
+	 * r7: source address, r8: end address, r9: target address
+	 */
+	.globl	trap_init
+trap_init:
+	lwz	r7, GOT(_start)
+	lwz	r8, GOT(_end_of_vectors)
+
+	li	r9, 0x100		/* reset vector always at 0x100 */
+
+	cmplw	0, r7, r8
+	bgelr				/* return if r7>=r8 - just in case */
+
+	mflr	r4			/* save link register		*/
+1:
+	lwz	r0, 0(r7)
+	stw	r0, 0(r9)
+	addi	r7, r7, 4
+	addi	r9, r9, 4
+	cmplw	0, r7, r8
+	bne	1b
+
+	/*
+	 * relocate `hdlr' and `int_return' entries
+	 */
+	li	r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+	li	r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+	bl	trap_reloc
+	addi	r7, r7, 0x100		/* next exception vector	*/
+	cmplw	0, r7, r8
+	blt	2b
+
+	li	r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+	bl	trap_reloc
+
+	li	r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+	bl	trap_reloc
+
+	li	r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+	li	r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+	bl	trap_reloc
+	addi	r7, r7, 0x100		/* next exception vector	*/
+	cmplw	0, r7, r8
+	blt	3b
+
+	li	r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+	li	r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+	bl	trap_reloc
+	addi	r7, r7, 0x100		/* next exception vector	*/
+	cmplw	0, r7, r8
+	blt	4b
+
+	/* enable execptions from RAM vectors */
+	mfmsr	r7
+	li	r8,MSR_IP
+	andc	r7,r7,r8
+	mtmsr	r7
+
+	mtlr	r4			/* restore link register	*/
+	blr
+
+	/*
+	 * Function: relocate entries for one exception vector
+	 */
+trap_reloc:
+	lwz	r0, 0(r7)		/* hdlr ...			*/
+	add	r0, r0, r3		/*  ... += dest_addr		*/
+	stw	r0, 0(r7)
+
+	lwz	r0, 4(r7)		/* int_return ...		*/
+	add	r0, r0, r3		/*  ... += dest_addr		*/
+	stw	r0, 4(r7)
+
+	sync
+	isync
+
+	blr
+
+.globl enable_ext_addr
+enable_ext_addr:
+	mfspr	r0, HID0
+	lis	r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@h
+	ori	r0, r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@l
+	mtspr	HID0, r0
+	sync
+	isync
+	blr
+
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+.globl setup_ccsrbar
+setup_ccsrbar:
+	/* Special sequence needed to update CCSRBAR itself */
+	lis	r4, CFG_CCSRBAR_DEFAULT@h
+	ori	r4, r4, CFG_CCSRBAR_DEFAULT@l
+
+	lis	r5, CFG_CCSRBAR@h
+	ori	r5, r5, CFG_CCSRBAR@l
+	srwi	r6,r5,12
+	stw	r6, 0(r4)
+	isync
+
+	lis	r5, 0xffff
+	ori	r5,r5,0xf000
+	lwz	r5, 0(r5)
+	isync
+
+	lis	r3, CFG_CCSRBAR@h
+	lwz	r5, CFG_CCSRBAR@l(r3)
+	isync
+
+	blr
+#endif
+
+#ifdef CFG_INIT_RAM_LOCK
+lock_ram_in_cache:
+	/* Allocate Initial RAM in data cache.
+	 */
+	lis	r3, (CFG_INIT_RAM_ADDR & ~31)@h
+	ori	r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
+	li	r2, ((CFG_INIT_RAM_END & ~31) + \
+		     (CFG_INIT_RAM_ADDR & 31) + 31) / 32
+	mtctr	r2
+1:
+	dcbz	r0, r3
+	addi	r3, r3, 32
+	bdnz	1b
+#if 1
+/* Lock the data cache */
+	mfspr	r0, HID0
+	ori	r0, r0, 0x1000
+	sync
+	mtspr	HID0, r0
+	sync
+	blr
+#endif
+#if 0
+	/* Lock the first way of the data cache */
+	mfspr	r0, LDSTCR
+	ori	r0, r0, 0x0080
+#if defined(CONFIG_ALTIVEC)
+	dssall
+#endif
+	sync
+	mtspr	LDSTCR, r0
+	sync
+	isync
+	blr
+#endif
+
+.globl unlock_ram_in_cache
+unlock_ram_in_cache:
+	/* invalidate the INIT_RAM section */
+	lis	r3, (CFG_INIT_RAM_ADDR & ~31)@h
+	ori	r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
+	li	r2, ((CFG_INIT_RAM_END & ~31) + \
+		     (CFG_INIT_RAM_ADDR & 31) + 31) / 32
+	mtctr	r2
+1:	icbi	r0, r3
+	addi	r3, r3, 32
+	bdnz	1b
+	sync			/* Wait for all icbi to complete on bus */
+	isync
+#if 1
+/* Unlock the data cache and invalidate it */
+	mfspr	r0, HID0
+	li	r3,0x1000
+	andc	r0,r0,r3
+	li	r3,0x0400
+	or	r0,r0,r3
+	sync
+	mtspr	HID0, r0
+	sync
+	blr
+#endif
+#if 0
+	/* Unlock the first way of the data cache */
+	mfspr	r0, LDSTCR
+	li	r3,0x0080
+	andc	r0,r0,r3
+#ifdef CONFIG_ALTIVEC
+	dssall
+#endif
+	sync
+	mtspr	LDSTCR, r0
+	sync
+	isync
+	li	r3,0x0400
+	or	r0,r0,r3
+	sync
+	mtspr	HID0, r0
+	sync
+	blr
+#endif
+#endif
+
+/* If this is a multi-cpu system then we need to handle the
+ * 2nd cpu.  The assumption is that the 2nd cpu is being
+ * held in boot holdoff mode until the 1st cpu unlocks it
+ * from Linux.	We'll do some basic cpu init and then pass
+ * it to the Linux Reset Vector.
+ * Sri:	 Much of this initialization is not required. Linux
+ * rewrites the bats, and the sprs and also enables the L1 cache.
+ */
+#if (CONFIG_NUM_CPUS > 1)
+.globl secondary_cpu_setup
+secondary_cpu_setup:
+	/* Do only core setup on all cores except cpu0 */
+	bl	invalidate_bats
+	sync
+	bl	enable_ext_addr
+
+#ifdef CFG_L2
+	/* init the L2 cache */
+	addis	r3, r0, L2_INIT@h
+	ori	r3, r3, L2_INIT@l
+	sync
+	mtspr	l2cr, r3
+#ifdef CONFIG_ALTIVEC
+	dssall
+#endif
+	/* invalidate the L2 cache */
+	bl	l2cache_invalidate
+	sync
+#endif
+
+	/* enable and invalidate the data cache */
+	bl	dcache_enable
+	sync
+
+	/* enable and invalidate the instruction cache*/
+	bl	icache_enable
+	sync
+
+	/* TBEN in HID0 */
+	mfspr	r4, HID0
+	oris	r4, r4, 0x0400
+	mtspr	HID0, r4
+	sync
+	isync
+
+	/*SYNCBE|ABE in HID1*/
+	mfspr	r4, HID1
+	ori	r4, r4, 0x0C00
+	mtspr	HID1, r4
+	sync
+	isync
+
+	lis	r3, CONFIG_LINUX_RESET_VEC@h
+	ori	r3, r3, CONFIG_LINUX_RESET_VEC@l
+	mtlr	r3
+	blr
+
+	/* Never Returns, Running in Linux Now */
+#endif
diff --git a/cpu/mpc86xx/traps.c b/cpu/mpc86xx/traps.c
new file mode 100644
index 0000000..8ea14e5
--- /dev/null
+++ b/cpu/mpc86xx/traps.c
@@ -0,0 +1,226 @@
+/*
+ * Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+int (*debugger_exception_handler)(struct pt_regs *) = 0;
+#endif
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace(unsigned long *sp)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	int cnt = 0;
+	unsigned long i;
+
+	printf("Call backtrace: ");
+	while (sp) {
+		if ((uint) sp > END_OF_MEM)
+			break;
+
+		i = sp[1];
+		if (cnt++ % 7 == 0)
+			printf("\n");
+		printf("%08lX ", i);
+		if (cnt > 32)
+			break;
+		sp = (unsigned long *)*sp;
+	}
+	printf("\n");
+}
+
+void
+show_regs(struct pt_regs *regs)
+{
+	int i;
+
+	printf("NIP: %08lX XER: %08lX LR: %08lX REGS:"
+	       " %p TRAP: %04lx DAR: %08lX\n",
+	       regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+	printf("MSR: %08lx EE: %01x PR: %01x FP:"
+	       " %01x ME: %01x IR/DR: %01x%01x\n",
+	       regs->msr, regs->msr & MSR_EE ? 1 : 0,
+	       regs->msr & MSR_PR ? 1 : 0, regs->msr & MSR_FP ? 1 : 0,
+	       regs->msr & MSR_ME ? 1 : 0, regs->msr & MSR_IR ? 1 : 0,
+	       regs->msr & MSR_DR ? 1 : 0);
+
+	printf("\n");
+	for (i = 0; i < 32; i++) {
+		if ((i % 8) == 0) {
+			printf("GPR%02d: ", i);
+		}
+
+		printf("%08lX ", regs->gpr[i]);
+		if ((i % 8) == 7) {
+			printf("\n");
+		}
+	}
+}
+
+
+void
+_exception(int signr, struct pt_regs *regs)
+{
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Exception in kernel pc %lx signal %d", regs->nip, signr);
+}
+
+void
+MachineCheckException(struct pt_regs *regs)
+{
+	unsigned long fixup;
+
+	/* Probing PCI using config cycles cause this exception
+	 * when a device is not present.  Catch it and return to
+	 * the PCI exception handler.
+	 */
+	if ((fixup = search_exception_table(regs->nip)) != 0) {
+		regs->nip = fixup;
+		return;
+	}
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler) (regs))
+		return;
+#endif
+
+	printf("Machine check in kernel mode.\n");
+	printf("Caused by (from msr): ");
+	printf("regs %p ", regs);
+	switch (regs->msr & 0x000F0000) {
+	case (0x80000000 >> 12):
+		printf("Machine check signal - probably due to mm fault\n"
+		       "with mmu off\n");
+		break;
+	case (0x80000000 >> 13):
+		printf("Transfer error ack signal\n");
+		break;
+	case (0x80000000 >> 14):
+		printf("Data parity signal\n");
+		break;
+	case (0x80000000 >> 15):
+		printf("Address parity signal\n");
+		break;
+	default:
+		printf("Unknown values in msr\n");
+	}
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("machine check");
+}
+
+void
+AlignmentException(struct pt_regs *regs)
+{
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler) (regs))
+		return;
+#endif
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Alignment Exception");
+}
+
+void
+ProgramCheckException(struct pt_regs *regs)
+{
+	unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL;
+	int i, j;
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler) (regs))
+		return;
+#endif
+	show_regs(regs);
+
+	p = (unsigned char *)((unsigned long)p & 0xFFFFFFE0);
+	p -= 32;
+	for (i = 0; i < 256; i += 16) {
+		printf("%08x: ", (unsigned int)p + i);
+		for (j = 0; j < 16; j++) {
+			printf("%02x ", p[i + j]);
+		}
+		printf("\n");
+	}
+
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Program Check Exception");
+}
+
+void
+SoftEmuException(struct pt_regs *regs)
+{
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler) (regs))
+		return;
+#endif
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Software Emulation Exception");
+}
+
+void
+UnknownException(struct pt_regs *regs)
+{
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler) (regs))
+		return;
+#endif
+	printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+	       regs->nip, regs->msr, regs->trap);
+	_exception(0, regs);
+}
+
+/*
+ * Probe an address by reading.
+ * If not present, return -1,
+ * otherwise return 0.
+ */
+int
+addr_probe(uint *addr)
+{
+	return 0;
+}
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 94478db..f4a7208 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -192,6 +192,7 @@
 	char buf[32];
 
 #if !defined(CONFIG_IOP480)
+	char addstr[64] = "";
 	sys_info_t sys_info;
 
 	puts ("CPU:   ");
@@ -308,19 +309,23 @@
 #endif /* CONFIG_440 */
 
 	case PVR_440EPX1_RA:
-		puts("EPx Rev. A - Security/Kasumi support");
+		puts("EPx Rev. A");
+		strcpy(addstr, "Security/Kasumi support");
 		break;
 
 	case PVR_440EPX2_RA:
-		puts("EPx Rev. A - No Security/Kasumi support");
+		puts("EPx Rev. A");
+		strcpy(addstr, "No Security/Kasumi support");
 		break;
 
 	case PVR_440GRX1_RA:
-		puts("GRx Rev. A - Security/Kasumi support");
+		puts("GRx Rev. A");
+		strcpy(addstr, "Security/Kasumi support");
 		break;
 
 	case PVR_440GRX2_RA:
-		puts("GRx Rev. A - No Security/Kasumi support");
+		puts("GRx Rev. A");
+		strcpy(addstr, "No Security/Kasumi support");
 		break;
 
 	case PVR_440SP_RA:
@@ -349,13 +354,16 @@
 	       sys_info.freqPLB / sys_info.pllOpbDiv / 1000000,
 	       FREQ_EBC / 1000000);
 
+	if (addstr[0] != 0)
+		printf("       %s\n", addstr);
+
 #if defined(I2C_BOOTROM)
 	printf ("       I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
 #if defined(SDR0_PINSTP_SHIFT)
 	printf ("       Bootstrap Option %c - ", (char)bootstrap_option() + 'A');
 	printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]);
-#endif
-#endif
+#endif	/* SDR0_PINSTP_SHIFT */
+#endif	/* I2C_BOOTROM */
 
 #if defined(CONFIG_PCI)
 	printf ("       Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis");
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
index 183ab5e..3521731 100644
--- a/cpu/ppc4xx/ndfc.c
+++ b/cpu/ppc4xx/ndfc.c
@@ -66,7 +66,7 @@
 static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W;
+	ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
 
 	if (hwctl & 0x1)
 		out8(base + NDFC_CMD, byte);
@@ -79,7 +79,7 @@
 static u_char ndfc_read_byte(struct mtd_info *mtdinfo)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W;
+	ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
 
 	return (in8(base + NDFC_DATA));
 }
@@ -87,7 +87,7 @@
 static int ndfc_dev_ready(struct mtd_info *mtdinfo)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W;
+	ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
 
 	while (!(in32(base + NDFC_STAT) & NDFC_STAT_IS_READY))
 		;
@@ -111,30 +111,30 @@
 static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W;
+	ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
 	uint32_t *p = (uint32_t *) buf;
 
-	for(;len > 0; len -= 4)
+	for (;len > 0; len -= 4)
 		*p++ = in32(base + NDFC_DATA);
 }
 
 static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W;
+	ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
 	uint32_t *p = (uint32_t *) buf;
 
-	for(; len > 0; len -= 4)
+	for (; len > 0; len -= 4)
 		out32(base + NDFC_DATA, *p++);
 }
 
 static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W;
+	ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
 	uint32_t *p = (uint32_t *) buf;
 
-	for(; len > 0; len -= 4)
+	for (; len > 0; len -= 4)
 		if (*p++ != in32(base + NDFC_DATA))
 			return -1;
 
@@ -142,8 +142,25 @@
 }
 #endif /* #ifndef CONFIG_NAND_SPL */
 
+void board_nand_select_device(struct nand_chip *nand, int chip)
+{
+	/*
+	 * Don't use "chip" to address the NAND device,
+	 * generate the cs from the address where it is encoded.
+	 */
+	int cs = (ulong)nand->IO_ADDR_W & 0x00000003;
+	ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc;
+
+	/* Set NandFlash Core Configuration Register */
+	/* 1col x 2 rows */
+	out32(base + NDFC_CCR, 0x00000000 | (cs << 24));
+}
+
 void board_nand_init(struct nand_chip *nand)
 {
+	int cs = (ulong)nand->IO_ADDR_W & 0x00000003;
+	ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc;
+
 	nand->eccmode = NAND_ECC_SOFT;
 
 	nand->hwcontrol  = ndfc_hwcontrol;
@@ -166,10 +183,11 @@
 	mtebc(pb0ap, CFG_EBC_PB0AP);
 #endif
 
-	/* Set NandFlash Core Configuration Register */
-	/* Chip select 3, 1col x 2 rows */
-	out32(CFG_NAND_BASE + NDFC_CCR, 0x00000000 | (CFG_NAND_CS << 24));
-	out32(CFG_NAND_BASE + NDFC_BCFG0 + (CFG_NAND_CS << 2), 0x80002222);
+	/*
+	 * Select required NAND chip in NDFC
+	 */
+	board_nand_select_device(nand, cs);
+	out32(base + NDFC_BCFG0 + (cs << 2), 0x80002222);
 }
 
 #endif
diff --git a/doc/README.AVR32 b/doc/README.AVR32
new file mode 100644
index 0000000..abec872
--- /dev/null
+++ b/doc/README.AVR32
@@ -0,0 +1,33 @@
+From: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed, 30 Aug 2006 17:01:46 +0200
+Subject: [PATCH] AVR32 architecture support
+
+This patch adds common infrastructure code for the Atmel AVR32
+architecture.
+
+AVR32 is a new high-performance 32-bit RISC microprocessor core,
+designed for cost-sensitive embedded applications, with particular
+emphasis on low power consumption and high code density. The AVR32
+architecture is not binary compatible with earlier 8-bit AVR
+architectures.
+
+The AVR32 architecture, including the instruction set, is described
+by the AVR32 Architecture Manual, available from
+
+http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
+
+A GNU toolchain with support for AVR32 is included with the ATSTK1000
+BSP, which can be downloaded as an ISO image from
+
+http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918
+
+Alternatively, you can build it yourself by following the
+Getting Started guide at avr32linux.org, which also provides links
+to the necessary sources and patches you need to download:
+
+http://avr32linux.org/twiki/bin/view/Main/GettingStarted
+
+The AVR32 ports of u-boot, the Linux kernel, the GNU toolchain and
+other associated software are actively supported by Atmel Corporation.
+
+Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index f0cf782..ae8202b 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -100,6 +100,9 @@
 	SW7[1:4]  =    0101 =  5    => 5 x 66	 = 330	CCB Sysclk
 	SW7[5:6]  =	 01	    => 5:2 x 330 = 825	Core clock
 
+    In order to use PCI-X (only in the first PCI slot.  The one with
+    the RIO connector), you need to set SW1[4] (config) to 1 (off).
+    Also, configure the board to run PCI at 66 MHz.
 
 2. MEMORY MAP TO WORK WITH LINUX KERNEL
 
diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn
new file mode 100644
index 0000000..4a650ce
--- /dev/null
+++ b/doc/README.mpc8641hpcn
@@ -0,0 +1,123 @@
+Freescale MPC8641HPCN board
+===========================
+
+Created 05/24/2006 Haiying Wang
+-------------------------------
+
+1. Building U-Boot
+------------------
+The 86xx HPCN code base is known to compile using:
+    Binutils 2.15, Gcc 3.4.3, Glibc 2.3.3
+
+    $ make MPC8641HPCN_config
+    Configuring for MPC8641HPCN board...
+
+    $ make
+
+
+2. Switch and Jumper Setting
+----------------------------
+Jumpers:
+	J14 Pins 1-2 (near plcc32 socket)
+
+Switches:
+	SW1(1-5) = 01100	CFG_COREPLL	= 01000 :: CORE =   2:1
+						  01100 :: CORE = 2.5:1
+						  10000 :: CORE =   3:1
+						  11100 :: CORE = 3.5:1
+						  10100 :: CORE =   4:1
+						  01110 :: CORE = 4.5:1
+	SW1(6-8) = 001		CFG_SYSCLK	= 000	:: SYSCLK = 33MHz
+						  001	:: SYSCLK = 40MHz
+
+	SW2(1-4) = 1100		CFG_CCBPLL	= 0010	:: 2X
+						  0100	:: 4X
+						  0110	:: 6X
+						  1000	:: 8X
+						  1010	:: 10X
+						  1100	:: 12X
+						  1110	:: 14X
+						  0000	:: 16X
+	SW2(5-8) = 1110		CFG_BOOTLOC	= 1110	:: boot 16-bit localbus
+
+	SW3(1-7) = 0011000	CFG_VID		= 0011000 :: VCORE = 1.2V
+						  0100000 :: VCORE = 1.11V
+	SW3(8)	 = 0		VCC_PLAT	= 0	:: VCC_PLAT = 1.2V
+						  1	:: VCC_PLAT = 1.0V
+
+	SW4(1-2) = 11		CFG_HOSTMODE	= 11	:: both prots host/root
+	SW4(3-4) = 11		CFG_BOOTSEQ	= 11	:: no boot seq
+	SW4(5-8) = 0011		CFG_IOPORT	= 0011	:: both PEX
+
+	SW5(1)	 = 1		CFG_FLASHMAP	= 1	:: boot from flash
+						  0	:: boot from PromJet
+	SW5(2)	 = 1		CFG_FLASHBANK	= 1	:: swap upper/lower
+							 halves (virtual banks)
+						  0	:: normal
+	SW5(3)	 = 0		CFG_FLASHWP	= 0	:: not protected
+	SW5(4)	 = 0 		CFG_PORTDIV	= 1	:: 2:1 for PD4
+							   1:1 for PD6
+	SW5(5-6) = 11		CFG_PIXISOPT	= 11	:: s/w determined
+	SW5(7-8) = 11		CFG_LADOPT	= 11	:: s/w determined
+
+	SW6(1)	 = 1		CFG_CPUBOOT	= 1	:: no boot holdoff
+	SW6(2)	 = 1		CFG_BOOTADDR	= 1	:: no traslation
+	SW6(3-5) = 000		CFG_REFCLKSEL	= 000	:: 100MHZ
+	SW6(6)	 = 1		CFG_SERROM_ADDR= 1	::
+	SW6(7)	 = 1		CFG_MEMDEBUG	= 1	::
+	SW6(8)	 = 1		CFG_DDRDEBUG	= 1	::
+
+	SW8(1)	 = 1		ACZ_SYNC	= 1	:: 48MHz on TP49
+	SW8(2)	 = 1		ACB_SYNC	= 1	:: THRMTRIP disabled
+	SW8(3)	 = 1		ACZ_SDOUT	= 1	:: p4 mode
+	SW8(4)	 = 1		ACB_SDOUT	= 1	:: PATA freq. = 133MHz
+	SW8(5)	 = 0		SUSLED		= 0	:: SouthBridge Mode
+	SW8(6)	 = 0		SPREAD		= 0	:: REFCLK SSCG Disabled
+	SW8(7)	 = 1		ACPWR		= 1	:: non-battery
+	SW8(8)	 = 0		CFG_IDWP	= 0	:: write enable
+
+
+3. Flash U-Boot
+---------------
+The flash range 0xFF800000 to 0xFFFFFFFF can be divided into 2 halves.
+It is possible to use either half to boot using u-boot.  Switch 5 bit 2
+is used for this purpose.
+
+0xFF800000 to 0xFFBFFFFF - 4MB
+0xFFC00000 to 0xFFFFFFFF - 4MB
+When this bit is 0, U-Boot is at 0xFFF00000.
+When this bit is 1, U-Boot is at 0xFFB00000.
+
+Use the above mentioned flash commands to program the other half, and
+use switch 5, bit 2 to alternate between the halves.  Note: The booting
+version of U-Boot will always be at 0xFFF00000.
+
+To Flash U-Boot into the booting bank (0xFFC00000 - 0xFFFFFFFF):
+
+	tftp 1000000 u-boot.bin
+	protect off all
+	erase fff00000 ffffffff
+	cp.b 1000000 fff00100 80000
+
+To Flash U-boot into the alternative bank (0xFF800000 - 0xFFBFFFFF):
+
+	tftp 1000000 u-boot.bin
+	erase ffb00000 ffbfffff
+	cp.b 1000000 ffb00100 80000
+
+
+4. Memory Map
+-------------
+
+	Memory Range			Device		Size
+	------------			------		----
+	0x0000_0000	0x7fff_ffff	DDR		2G
+	0x8000_0000	0x9fff_ffff	PCI1/PEX1 MEM	512M
+	0xa000_0000	0xafff_ffff	PCI2/PEX2 MEM	512M
+	0xf800_0000	0xf80f_ffff	CCSR		1M
+	0xf810_0000	0xf81f_ffff	PIXIS		1M
+	0xf840_0000	0xf840_3fff	Stack space	32K
+	0xe200_0000	0xe2ff_ffff	PCI1/PEX1 IO	16M
+	0xe300_0000	0xe3ff_ffff	PCI2/PEX2 IO	16M
+	0xfe00_0000	0xfeff_ffff	Flash(alternate)16M
+	0xff00_0000	0xffff_ffff	Flash(boot bank)16M
diff --git a/doc/README.nand b/doc/README.nand
index 2b9a529..5279a4f 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -1,9 +1,7 @@
 NAND FLASH commands and notes
 
-
 See NOTE below!!!
 
-
 # (C) Copyright 2003
 # Dave Ellis, SIXNET, dge@sixnetio.com
 #
@@ -209,7 +207,6 @@
 with DoC will break).
 
 
-
 Additional improvements to the NAND subsystem by Guido Classen, 10-10-2006
 
 JFFS2 related commands:
diff --git a/drivers/Makefile b/drivers/Makefile
index 5a7ab71..5a369df 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -27,7 +27,7 @@
 
 LIB	= $(obj)libdrivers.a
 
-COBJS	= 3c589.o 5701rls.o ali512x.o \
+COBJS	= 3c589.o 5701rls.o ali512x.o atmel_usart.o \
 	  bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
 	  cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
 	  e1000.o eepro100.o \
@@ -44,13 +44,14 @@
 	  serial.o serial_max3100.o \
 	  serial_pl010.o serial_pl011.o serial_xuartlite.o \
 	  sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
-	  status_led.o sym53c8xx.o \
+	  status_led.o sym53c8xx.o ahci.o \
 	  ti_pci1410a.o tigon3.o tsec.o \
 	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
 	  videomodes.o w83c553f.o \
 	  ks8695eth.o \
 	  pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o	\
-	  rpx_pcmcia.o
+	  rpx_pcmcia.o \
+	  fsl_i2c.o
 
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/drivers/ahci.c b/drivers/ahci.c
new file mode 100644
index 0000000..8ceff00
--- /dev/null
+++ b/drivers/ahci.c
@@ -0,0 +1,702 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ * Author: Jason Jin<Jason.jin@freescale.com>
+ *         Zhang Wei<wei.zhang@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * with the reference on libata and ahci drvier in kernel
+ *
+ */
+#include <common.h>
+
+#ifdef CONFIG_SCSI_AHCI
+
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <scsi.h>
+#include <ata.h>
+#include <linux/ctype.h>
+#include <ahci.h>
+
+struct ahci_probe_ent *probe_ent = NULL;
+hd_driveid_t *ataid[AHCI_MAX_PORTS];
+
+#define writel_with_flush(a,b)	do { writel(a,b); readl(b); } while (0)
+
+
+static inline u32 ahci_port_base(u32 base, u32 port)
+{
+	return base + 0x100 + (port * 0x80);
+}
+
+
+static void ahci_setup_port(struct ahci_ioports *port, unsigned long base,
+			    unsigned int port_idx)
+{
+	base = ahci_port_base(base, port_idx);
+
+	port->cmd_addr = base;
+	port->scr_addr = base + PORT_SCR;
+}
+
+
+#define msleep(a) udelay(a * 1000)
+#define ssleep(a) msleep(a * 1000)
+
+static int waiting_for_cmd_completed(volatile u8 *offset,
+				     int timeout_msec,
+				     u32 sign)
+{
+	int i;
+	u32 status;
+
+	for (i = 0; ((status = readl(offset)) & sign) && i < timeout_msec; i++)
+		msleep(1);
+
+	return (i < timeout_msec) ? 0 : -1;
+}
+
+
+static int ahci_host_init(struct ahci_probe_ent *probe_ent)
+{
+	pci_dev_t pdev = probe_ent->dev;
+	volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
+	u32 tmp, cap_save;
+	u16 tmp16;
+	int i, j;
+	volatile u8 *port_mmio;
+	unsigned short vendor;
+
+	cap_save = readl(mmio + HOST_CAP);
+	cap_save &= ((1 << 28) | (1 << 17));
+	cap_save |= (1 << 27);
+
+	/* global controller reset */
+	tmp = readl(mmio + HOST_CTL);
+	if ((tmp & HOST_RESET) == 0)
+		writel_with_flush(tmp | HOST_RESET, mmio + HOST_CTL);
+
+	/* reset must complete within 1 second, or
+	 * the hardware should be considered fried.
+	 */
+	ssleep(1);
+
+	tmp = readl(mmio + HOST_CTL);
+	if (tmp & HOST_RESET) {
+		debug("controller reset failed (0x%x)\n", tmp);
+		return -1;
+	}
+
+	writel_with_flush(HOST_AHCI_EN, mmio + HOST_CTL);
+	writel(cap_save, mmio + HOST_CAP);
+	writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
+
+	pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
+
+	if (vendor == PCI_VENDOR_ID_INTEL) {
+		u16 tmp16;
+		pci_read_config_word(pdev, 0x92, &tmp16);
+		tmp16 |= 0xf;
+		pci_write_config_word(pdev, 0x92, tmp16);
+	}
+
+	probe_ent->cap = readl(mmio + HOST_CAP);
+	probe_ent->port_map = readl(mmio + HOST_PORTS_IMPL);
+	probe_ent->n_ports = (probe_ent->cap & 0x1f) + 1;
+
+	debug("cap 0x%x  port_map 0x%x  n_ports %d\n",
+	      probe_ent->cap, probe_ent->port_map, probe_ent->n_ports);
+
+	for (i = 0; i < probe_ent->n_ports; i++) {
+		probe_ent->port[i].port_mmio = ahci_port_base((u32) mmio, i);
+		port_mmio = (u8 *) probe_ent->port[i].port_mmio;
+		ahci_setup_port(&probe_ent->port[i], (unsigned long)mmio, i);
+
+		/* make sure port is not active */
+		tmp = readl(port_mmio + PORT_CMD);
+		if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
+			   PORT_CMD_FIS_RX | PORT_CMD_START)) {
+			tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
+				 PORT_CMD_FIS_RX | PORT_CMD_START);
+			writel_with_flush(tmp, port_mmio + PORT_CMD);
+
+			/* spec says 500 msecs for each bit, so
+			 * this is slightly incorrect.
+			 */
+			msleep(500);
+		}
+
+		writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD);
+
+		j = 0;
+		while (j < 100) {
+			msleep(10);
+			tmp = readl(port_mmio + PORT_SCR_STAT);
+			if ((tmp & 0xf) == 0x3)
+				break;
+			j++;
+		}
+
+		tmp = readl(port_mmio + PORT_SCR_ERR);
+		debug("PORT_SCR_ERR 0x%x\n", tmp);
+		writel(tmp, port_mmio + PORT_SCR_ERR);
+
+		/* ack any pending irq events for this port */
+		tmp = readl(port_mmio + PORT_IRQ_STAT);
+		debug("PORT_IRQ_STAT 0x%x\n", tmp);
+		if (tmp)
+			writel(tmp, port_mmio + PORT_IRQ_STAT);
+
+		writel(1 << i, mmio + HOST_IRQ_STAT);
+
+		/* set irq mask (enables interrupts) */
+		writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
+
+		/*register linkup ports */
+		tmp = readl(port_mmio + PORT_SCR_STAT);
+		debug("Port %d status: 0x%x\n", i, tmp);
+		if ((tmp & 0xf) == 0x03)
+			probe_ent->link_port_map |= (0x01 << i);
+	}
+
+	tmp = readl(mmio + HOST_CTL);
+	debug("HOST_CTL 0x%x\n", tmp);
+	writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
+	tmp = readl(mmio + HOST_CTL);
+	debug("HOST_CTL 0x%x\n", tmp);
+
+	pci_read_config_word(pdev, PCI_COMMAND, &tmp16);
+	tmp |= PCI_COMMAND_MASTER;
+	pci_write_config_word(pdev, PCI_COMMAND, tmp16);
+
+	return 0;
+}
+
+
+static void ahci_print_info(struct ahci_probe_ent *probe_ent)
+{
+	pci_dev_t pdev = probe_ent->dev;
+	volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
+	u32 vers, cap, impl, speed;
+	const char *speed_s;
+	u16 cc;
+	const char *scc_s;
+
+	vers = readl(mmio + HOST_VERSION);
+	cap = probe_ent->cap;
+	impl = probe_ent->port_map;
+
+	speed = (cap >> 20) & 0xf;
+	if (speed == 1)
+		speed_s = "1.5";
+	else if (speed == 2)
+		speed_s = "3";
+	else
+		speed_s = "?";
+
+	pci_read_config_word(pdev, 0x0a, &cc);
+	if (cc == 0x0101)
+		scc_s = "IDE";
+	else if (cc == 0x0106)
+		scc_s = "SATA";
+	else if (cc == 0x0104)
+		scc_s = "RAID";
+	else
+		scc_s = "unknown";
+
+	printf("AHCI %02x%02x.%02x%02x "
+	       "%u slots %u ports %s Gbps 0x%x impl %s mode\n",
+	       (vers >> 24) & 0xff,
+	       (vers >> 16) & 0xff,
+	       (vers >> 8) & 0xff,
+	       vers & 0xff,
+	       ((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s);
+
+	printf("flags: "
+	       "%s%s%s%s%s%s"
+	       "%s%s%s%s%s%s%s\n",
+	       cap & (1 << 31) ? "64bit " : "",
+	       cap & (1 << 30) ? "ncq " : "",
+	       cap & (1 << 28) ? "ilck " : "",
+	       cap & (1 << 27) ? "stag " : "",
+	       cap & (1 << 26) ? "pm " : "",
+	       cap & (1 << 25) ? "led " : "",
+	       cap & (1 << 24) ? "clo " : "",
+	       cap & (1 << 19) ? "nz " : "",
+	       cap & (1 << 18) ? "only " : "",
+	       cap & (1 << 17) ? "pmp " : "",
+	       cap & (1 << 15) ? "pio " : "",
+	       cap & (1 << 14) ? "slum " : "",
+	       cap & (1 << 13) ? "part " : "");
+}
+
+static int ahci_init_one(pci_dev_t pdev)
+{
+	u32 iobase, vendor;
+	int rc;
+
+	memset((void *)ataid, 0, sizeof(hd_driveid_t *) * AHCI_MAX_PORTS);
+
+	probe_ent = malloc(sizeof(probe_ent));
+	memset(probe_ent, 0, sizeof(probe_ent));
+	probe_ent->dev = pdev;
+
+	pci_read_config_dword(pdev, AHCI_PCI_BAR, &iobase);
+	iobase &= ~0xf;
+
+	probe_ent->host_flags = ATA_FLAG_SATA
+				| ATA_FLAG_NO_LEGACY
+				| ATA_FLAG_MMIO
+				| ATA_FLAG_PIO_DMA
+				| ATA_FLAG_NO_ATAPI;
+	probe_ent->pio_mask = 0x1f;
+	probe_ent->udma_mask = 0x7f;	/*Fixme,assume to support UDMA6 */
+
+	probe_ent->mmio_base = iobase;
+
+	/* Take from kernel:
+	 * JMicron-specific fixup:
+	 * make sure we're in AHCI mode
+	 */
+	pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
+	if (vendor == 0x197b)
+		pci_write_config_byte(pdev, 0x41, 0xa1);
+
+	/* initialize adapter */
+	rc = ahci_host_init(probe_ent);
+	if (rc)
+		goto err_out;
+
+	ahci_print_info(probe_ent);
+
+	return 0;
+
+      err_out:
+	return rc;
+}
+
+
+#define MAX_DATA_BYTE_COUNT  (4*1024*1024)
+
+static int ahci_fill_sg(u8 port, unsigned char *buf, int buf_len)
+{
+	struct ahci_ioports *pp = &(probe_ent->port[port]);
+	struct ahci_sg *ahci_sg = pp->cmd_tbl_sg;
+	u32 sg_count;
+	int i;
+
+	sg_count = ((buf_len - 1) / MAX_DATA_BYTE_COUNT) + 1;
+	if (sg_count > AHCI_MAX_SG) {
+		printf("Error:Too much sg!\n");
+		return -1;
+	}
+
+	for (i = 0; i < sg_count; i++) {
+		ahci_sg->addr =
+		    cpu_to_le32((u32) buf + i * MAX_DATA_BYTE_COUNT);
+		ahci_sg->addr_hi = 0;
+		ahci_sg->flags_size = cpu_to_le32(0x3fffff &
+					  (buf_len < MAX_DATA_BYTE_COUNT
+					   ? (buf_len - 1)
+					   : (MAX_DATA_BYTE_COUNT - 1)));
+		ahci_sg++;
+		buf_len -= MAX_DATA_BYTE_COUNT;
+	}
+
+	return sg_count;
+}
+
+
+static void ahci_fill_cmd_slot(struct ahci_ioports *pp, u32 opts)
+{
+	pp->cmd_slot->opts = cpu_to_le32(opts);
+	pp->cmd_slot->status = 0;
+	pp->cmd_slot->tbl_addr = cpu_to_le32(pp->cmd_tbl & 0xffffffff);
+	pp->cmd_slot->tbl_addr_hi = 0;
+}
+
+
+static void ahci_set_feature(u8 port)
+{
+	struct ahci_ioports *pp = &(probe_ent->port[port]);
+	volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
+	u32 cmd_fis_len = 5;	/* five dwords */
+	u8 fis[20];
+
+	/*set feature */
+	memset(fis, 0, 20);
+	fis[0] = 0x27;
+	fis[1] = 1 << 7;
+	fis[2] = ATA_CMD_SETF;
+	fis[3] = SETFEATURES_XFER;
+	fis[12] = __ilog2(probe_ent->udma_mask + 1) + 0x40 - 0x01;
+
+	memcpy((unsigned char *)pp->cmd_tbl, fis, 20);
+	ahci_fill_cmd_slot(pp, cmd_fis_len);
+	writel(1, port_mmio + PORT_CMD_ISSUE);
+	readl(port_mmio + PORT_CMD_ISSUE);
+
+	if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) {
+		printf("set feature error!\n");
+	}
+}
+
+
+static int ahci_port_start(u8 port)
+{
+	struct ahci_ioports *pp = &(probe_ent->port[port]);
+	volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
+	u32 port_status;
+	u32 mem;
+
+	debug("Enter start port: %d\n", port);
+	port_status = readl(port_mmio + PORT_SCR_STAT);
+	debug("Port %d status: %x\n", port, port_status);
+	if ((port_status & 0xf) != 0x03) {
+		printf("No Link on this port!\n");
+		return -1;
+	}
+
+	mem = (u32) malloc(AHCI_PORT_PRIV_DMA_SZ + 2048);
+	if (!mem) {
+		free(pp);
+		printf("No mem for table!\n");
+		return -ENOMEM;
+	}
+
+	mem = (mem + 0x800) & (~0x7ff);	/* Aligned to 2048-bytes */
+	memset((u8 *) mem, 0, AHCI_PORT_PRIV_DMA_SZ);
+
+	/*
+	 * First item in chunk of DMA memory: 32-slot command table,
+	 * 32 bytes each in size
+	 */
+	pp->cmd_slot = (struct ahci_cmd_hdr *)mem;
+	debug("cmd_slot = 0x%x\n", pp->cmd_slot);
+	mem += (AHCI_CMD_SLOT_SZ + 224);
+
+	/*
+	 * Second item: Received-FIS area
+	 */
+	pp->rx_fis = mem;
+	mem += AHCI_RX_FIS_SZ;
+
+	/*
+	 * Third item: data area for storing a single command
+	 * and its scatter-gather table
+	 */
+	pp->cmd_tbl = mem;
+	debug("cmd_tbl_dma = 0x%x\n", pp->cmd_tbl);
+
+	mem += AHCI_CMD_TBL_HDR;
+	pp->cmd_tbl_sg = (struct ahci_sg *)mem;
+
+	writel_with_flush((u32) pp->cmd_slot, port_mmio + PORT_LST_ADDR);
+
+	writel_with_flush(pp->rx_fis, port_mmio + PORT_FIS_ADDR);
+
+	writel_with_flush(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
+			  PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
+			  PORT_CMD_START, port_mmio + PORT_CMD);
+
+	debug("Exit start port %d\n", port);
+
+	return 0;
+}
+
+
+static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf,
+				int buf_len)
+{
+
+	struct ahci_ioports *pp = &(probe_ent->port[port]);
+	volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
+	u32 opts;
+	u32 port_status;
+	int sg_count;
+
+	debug("Enter get_ahci_device_data: for port %d\n", port);
+
+	if (port > probe_ent->n_ports) {
+		printf("Invaild port number %d\n", port);
+		return -1;
+	}
+
+	port_status = readl(port_mmio + PORT_SCR_STAT);
+	if ((port_status & 0xf) != 0x03) {
+		debug("No Link on port %d!\n", port);
+		return -1;
+	}
+
+	memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len);
+
+	sg_count = ahci_fill_sg(port, buf, buf_len);
+	opts = (fis_len >> 2) | (sg_count << 16);
+	ahci_fill_cmd_slot(pp, opts);
+
+	writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
+
+	if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) {
+		printf("timeout exit!\n");
+		return -1;
+	}
+	debug("get_ahci_device_data: %d byte transferred.\n",
+	      pp->cmd_slot->status);
+
+	return 0;
+}
+
+
+static char *ata_id_strcpy(u16 *target, u16 *src, int len)
+{
+	int i;
+	for (i = 0; i < len / 2; i++)
+		target[i] = le16_to_cpu(src[i]);
+	return (char *)target;
+}
+
+
+static void dump_ataid(hd_driveid_t *ataid)
+{
+	debug("(49)ataid->capability = 0x%x\n", ataid->capability);
+	debug("(53)ataid->field_valid =0x%x\n", ataid->field_valid);
+	debug("(63)ataid->dma_mword = 0x%x\n", ataid->dma_mword);
+	debug("(64)ataid->eide_pio_modes = 0x%x\n", ataid->eide_pio_modes);
+	debug("(75)ataid->queue_depth = 0x%x\n", ataid->queue_depth);
+	debug("(80)ataid->major_rev_num = 0x%x\n", ataid->major_rev_num);
+	debug("(81)ataid->minor_rev_num = 0x%x\n", ataid->minor_rev_num);
+	debug("(82)ataid->command_set_1 = 0x%x\n", ataid->command_set_1);
+	debug("(83)ataid->command_set_2 = 0x%x\n", ataid->command_set_2);
+	debug("(84)ataid->cfsse = 0x%x\n", ataid->cfsse);
+	debug("(85)ataid->cfs_enable_1 = 0x%x\n", ataid->cfs_enable_1);
+	debug("(86)ataid->cfs_enable_2 = 0x%x\n", ataid->cfs_enable_2);
+	debug("(87)ataid->csf_default = 0x%x\n", ataid->csf_default);
+	debug("(88)ataid->dma_ultra = 0x%x\n", ataid->dma_ultra);
+	debug("(93)ataid->hw_config = 0x%x\n", ataid->hw_config);
+}
+
+
+/*
+ * SCSI INQUIRY command operation.
+ */
+static int ata_scsiop_inquiry(ccb *pccb)
+{
+	u8 hdr[] = {
+		0,
+		0,
+		0x5,		/* claim SPC-3 version compatibility */
+		2,
+		95 - 4,
+	};
+	u8 fis[20];
+	u8 *tmpid;
+	u8 port;
+
+	/* Clean ccb data buffer */
+	memset(pccb->pdata, 0, pccb->datalen);
+
+	memcpy(pccb->pdata, hdr, sizeof(hdr));
+
+	if (pccb->datalen <= 35)
+		return 0;
+
+	memset(fis, 0, 20);
+	/* Construct the FIS */
+	fis[0] = 0x27;		/* Host to device FIS. */
+	fis[1] = 1 << 7;	/* Command FIS. */
+	fis[2] = ATA_CMD_IDENT;	/* Command byte. */
+
+	/* Read id from sata */
+	port = pccb->target;
+	if (!(tmpid = malloc(sizeof(hd_driveid_t))))
+		return -ENOMEM;
+
+	if (get_ahci_device_data(port, (u8 *) & fis, 20,
+				 tmpid, sizeof(hd_driveid_t))) {
+		debug("scsi_ahci: SCSI inquiry command failure.\n");
+		return -EIO;
+	}
+
+	if (ataid[port])
+		free(ataid[port]);
+	ataid[port] = (hd_driveid_t *) tmpid;
+
+	memcpy(&pccb->pdata[8], "ATA     ", 8);
+	ata_id_strcpy((u16 *) &pccb->pdata[16], (u16 *)ataid[port]->model, 16);
+	ata_id_strcpy((u16 *) &pccb->pdata[32], (u16 *)ataid[port]->fw_rev, 4);
+
+	dump_ataid(ataid[port]);
+	return 0;
+}
+
+
+/*
+ * SCSI READ10 command operation.
+ */
+static int ata_scsiop_read10(ccb * pccb)
+{
+	u64 lba = 0;
+	u32 len = 0;
+	u8 fis[20];
+
+	lba = (((u64) pccb->cmd[2]) << 24) | (((u64) pccb->cmd[3]) << 16)
+	    | (((u64) pccb->cmd[4]) << 8) | ((u64) pccb->cmd[5]);
+	len = (((u32) pccb->cmd[7]) << 8) | ((u32) pccb->cmd[8]);
+
+	/* For 10-byte and 16-byte SCSI R/W commands, transfer
+	 * length 0 means transfer 0 block of data.
+	 * However, for ATA R/W commands, sector count 0 means
+	 * 256 or 65536 sectors, not 0 sectors as in SCSI.
+	 *
+	 * WARNING: one or two older ATA drives treat 0 as 0...
+	 */
+	if (!len)
+		return 0;
+	memset(fis, 0, 20);
+
+	/* Construct the FIS */
+	fis[0] = 0x27;		/* Host to device FIS. */
+	fis[1] = 1 << 7;	/* Command FIS. */
+	fis[2] = ATA_CMD_RD_DMA;	/* Command byte. */
+
+	/* LBA address, only support LBA28 in this driver */
+	fis[4] = pccb->cmd[5];
+	fis[5] = pccb->cmd[4];
+	fis[6] = pccb->cmd[3];
+	fis[7] = (pccb->cmd[2] & 0x0f) | 0xe0;
+
+	/* Sector Count */
+	fis[12] = pccb->cmd[8];
+	fis[13] = pccb->cmd[7];
+
+	/* Read from ahci */
+	if (get_ahci_device_data(pccb->target, (u8 *) & fis, 20,
+				 pccb->pdata, pccb->datalen)) {
+		debug("scsi_ahci: SCSI READ10 command failure.\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+
+/*
+ * SCSI READ CAPACITY10 command operation.
+ */
+static int ata_scsiop_read_capacity10(ccb *pccb)
+{
+	u8 buf[8];
+
+	if (!ataid[pccb->target]) {
+		printf("scsi_ahci: SCSI READ CAPACITY10 command failure. "
+		       "\tNo ATA info!\n"
+		       "\tPlease run SCSI commmand INQUIRY firstly!\n");
+		return -EPERM;
+	}
+
+	memset(buf, 0, 8);
+
+	*(u32 *) buf = le32_to_cpu(ataid[pccb->target]->lba_capacity);
+
+	buf[6] = 512 >> 8;
+	buf[7] = 512 & 0xff;
+
+	memcpy(pccb->pdata, buf, 8);
+
+	return 0;
+}
+
+
+/*
+ * SCSI TEST UNIT READY command operation.
+ */
+static int ata_scsiop_test_unit_ready(ccb *pccb)
+{
+	return (ataid[pccb->target]) ? 0 : -EPERM;
+}
+
+
+int scsi_exec(ccb *pccb)
+{
+	int ret;
+
+	switch (pccb->cmd[0]) {
+	case SCSI_READ10:
+		ret = ata_scsiop_read10(pccb);
+		break;
+	case SCSI_RD_CAPAC:
+		ret = ata_scsiop_read_capacity10(pccb);
+		break;
+	case SCSI_TST_U_RDY:
+		ret = ata_scsiop_test_unit_ready(pccb);
+		break;
+	case SCSI_INQUIRY:
+		ret = ata_scsiop_inquiry(pccb);
+		break;
+	default:
+		printf("Unsupport SCSI command 0x%02x\n", pccb->cmd[0]);
+		return FALSE;
+	}
+
+	if (ret) {
+		debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0], ret);
+		return FALSE;
+	}
+	return TRUE;
+
+}
+
+
+void scsi_low_level_init(int busdevfunc)
+{
+	int i;
+	u32 linkmap;
+
+	ahci_init_one(busdevfunc);
+
+	linkmap = probe_ent->link_port_map;
+
+	for (i = 0; i < CFG_SCSI_MAX_SCSI_ID; i++) {
+		if (((linkmap >> i) & 0x01)) {
+			if (ahci_port_start((u8) i)) {
+				printf("Can not start port %d\n", i);
+				continue;
+			}
+			ahci_set_feature((u8) i);
+		}
+	}
+}
+
+
+void scsi_bus_reset(void)
+{
+	/*Not implement*/
+}
+
+
+void scsi_print_error(ccb * pccb)
+{
+	/*The ahci error info can be read in the ahci driver*/
+}
+#endif
diff --git a/drivers/atmel_usart.c b/drivers/atmel_usart.c
new file mode 100644
index 0000000..41c3768
--- /dev/null
+++ b/drivers/atmel_usart.c
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <common.h>
+
+#ifdef CONFIG_ATMEL_USART
+#include <asm/io.h>
+#include <asm/arch/platform.h>
+
+#include "atmel_usart.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void serial_setbrg(void)
+{
+	unsigned long divisor;
+	unsigned long usart_hz;
+
+	/*
+	 *              Master Clock
+	 * Baud Rate = --------------
+	 *                16 * CD
+	 */
+	usart_hz = pm_get_clock_freq(gd->console_uart->resource[0].u.clock.id);
+	divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate;
+	usart3_writel(gd->console_uart, BRGR, USART3_BF(CD, divisor));
+}
+
+int serial_init(void)
+{
+	usart3_writel(gd->console_uart, CR,
+		      USART3_BIT(RSTRX) | USART3_BIT(RSTTX));
+
+	serial_setbrg();
+
+	usart3_writel(gd->console_uart, CR,
+		      USART3_BIT(RXEN) | USART3_BIT(TXEN));
+	usart3_writel(gd->console_uart, MR,
+		      USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
+		      | USART3_BF(USCLKS, USART3_USCLKS_MCK)
+		      | USART3_BF(CHRL, USART3_CHRL_8)
+		      | USART3_BF(PAR, USART3_PAR_NONE)
+		      | USART3_BF(NBSTOP, USART3_NBSTOP_1));
+
+	return 0;
+}
+
+void serial_putc(char c)
+{
+	if (c == '\n')
+		serial_putc('\r');
+
+	while (!(usart3_readl(gd->console_uart, CSR) & USART3_BIT(TXRDY))) ;
+	usart3_writel(gd->console_uart, THR, c);
+}
+
+void serial_puts(const char *s)
+{
+	while (*s)
+		serial_putc(*s++);
+}
+
+int serial_getc(void)
+{
+	while (!(usart3_readl(gd->console_uart, CSR) & USART3_BIT(RXRDY))) ;
+	return usart3_readl(gd->console_uart, RHR);
+}
+
+int serial_tstc(void)
+{
+	return (usart3_readl(gd->console_uart, CSR) & USART3_BIT(RXRDY)) != 0;
+}
+
+#endif /* CONFIG_ATMEL_USART */
diff --git a/drivers/atmel_usart.h b/drivers/atmel_usart.h
new file mode 100644
index 0000000..fad90a8
--- /dev/null
+++ b/drivers/atmel_usart.h
@@ -0,0 +1,314 @@
+/*
+ * Register definitions for the Atmel USART3 module.
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __DRIVERS_ATMEL_USART_H__
+#define __DRIVERS_ATMEL_USART_H__
+
+/* USART3 register offsets */
+#define USART3_CR				0x0000
+#define USART3_MR				0x0004
+#define USART3_IER				0x0008
+#define USART3_IDR				0x000c
+#define USART3_IMR				0x0010
+#define USART3_CSR				0x0014
+#define USART3_RHR				0x0018
+#define USART3_THR				0x001c
+#define USART3_BRGR				0x0020
+#define USART3_RTOR				0x0024
+#define USART3_TTGR				0x0028
+#define USART3_FIDI				0x0040
+#define USART3_NER				0x0044
+#define USART3_XXR				0x0048
+#define USART3_IFR				0x004c
+#define USART3_RPR				0x0100
+#define USART3_RCR				0x0104
+#define USART3_TPR				0x0108
+#define USART3_TCR				0x010c
+#define USART3_RNPR				0x0110
+#define USART3_RNCR				0x0114
+#define USART3_TNPR				0x0118
+#define USART3_TNCR				0x011c
+#define USART3_PTCR				0x0120
+#define USART3_PTSR				0x0124
+
+/* Bitfields in CR */
+#define USART3_RSTRX_OFFSET			2
+#define USART3_RSTRX_SIZE			1
+#define USART3_RSTTX_OFFSET			3
+#define USART3_RSTTX_SIZE			1
+#define USART3_RXEN_OFFSET			4
+#define USART3_RXEN_SIZE			1
+#define USART3_RXDIS_OFFSET			5
+#define USART3_RXDIS_SIZE			1
+#define USART3_TXEN_OFFSET			6
+#define USART3_TXEN_SIZE			1
+#define USART3_TXDIS_OFFSET			7
+#define USART3_TXDIS_SIZE			1
+#define USART3_RSTSTA_OFFSET			8
+#define USART3_RSTSTA_SIZE			1
+#define USART3_STTBRK_OFFSET			9
+#define USART3_STTBRK_SIZE			1
+#define USART3_STPBRK_OFFSET			10
+#define USART3_STPBRK_SIZE			1
+#define USART3_STTTO_OFFSET			11
+#define USART3_STTTO_SIZE			1
+#define USART3_SENDA_OFFSET			12
+#define USART3_SENDA_SIZE			1
+#define USART3_RSTIT_OFFSET			13
+#define USART3_RSTIT_SIZE			1
+#define USART3_RSTNACK_OFFSET			14
+#define USART3_RSTNACK_SIZE			1
+#define USART3_RETTO_OFFSET			15
+#define USART3_RETTO_SIZE			1
+#define USART3_DTREN_OFFSET			16
+#define USART3_DTREN_SIZE			1
+#define USART3_DTRDIS_OFFSET			17
+#define USART3_DTRDIS_SIZE			1
+#define USART3_RTSEN_OFFSET			18
+#define USART3_RTSEN_SIZE			1
+#define USART3_RTSDIS_OFFSET			19
+#define USART3_RTSDIS_SIZE			1
+#define USART3_COMM_TX_OFFSET			30
+#define USART3_COMM_TX_SIZE			1
+#define USART3_COMM_RX_OFFSET			31
+#define USART3_COMM_RX_SIZE			1
+
+/* Bitfields in MR */
+#define USART3_USART_MODE_OFFSET		0
+#define USART3_USART_MODE_SIZE			4
+#define USART3_USCLKS_OFFSET			4
+#define USART3_USCLKS_SIZE			2
+#define USART3_CHRL_OFFSET			6
+#define USART3_CHRL_SIZE			2
+#define USART3_SYNC_OFFSET			8
+#define USART3_SYNC_SIZE			1
+#define USART3_PAR_OFFSET			9
+#define USART3_PAR_SIZE				3
+#define USART3_NBSTOP_OFFSET			12
+#define USART3_NBSTOP_SIZE			2
+#define USART3_CHMODE_OFFSET			14
+#define USART3_CHMODE_SIZE			2
+#define USART3_MSBF_OFFSET			16
+#define USART3_MSBF_SIZE			1
+#define USART3_MODE9_OFFSET			17
+#define USART3_MODE9_SIZE			1
+#define USART3_CLKO_OFFSET			18
+#define USART3_CLKO_SIZE			1
+#define USART3_OVER_OFFSET			19
+#define USART3_OVER_SIZE			1
+#define USART3_INACK_OFFSET			20
+#define USART3_INACK_SIZE			1
+#define USART3_DSNACK_OFFSET			21
+#define USART3_DSNACK_SIZE			1
+#define USART3_MAX_ITERATION_OFFSET		24
+#define USART3_MAX_ITERATION_SIZE		3
+#define USART3_FILTER_OFFSET			28
+#define USART3_FILTER_SIZE			1
+
+/* Bitfields in CSR */
+#define USART3_RXRDY_OFFSET			0
+#define USART3_RXRDY_SIZE			1
+#define USART3_TXRDY_OFFSET			1
+#define USART3_TXRDY_SIZE			1
+#define USART3_RXBRK_OFFSET			2
+#define USART3_RXBRK_SIZE			1
+#define USART3_ENDRX_OFFSET			3
+#define USART3_ENDRX_SIZE			1
+#define USART3_ENDTX_OFFSET			4
+#define USART3_ENDTX_SIZE			1
+#define USART3_OVRE_OFFSET			5
+#define USART3_OVRE_SIZE			1
+#define USART3_FRAME_OFFSET			6
+#define USART3_FRAME_SIZE			1
+#define USART3_PARE_OFFSET			7
+#define USART3_PARE_SIZE			1
+#define USART3_TIMEOUT_OFFSET			8
+#define USART3_TIMEOUT_SIZE			1
+#define USART3_TXEMPTY_OFFSET			9
+#define USART3_TXEMPTY_SIZE			1
+#define USART3_ITERATION_OFFSET			10
+#define USART3_ITERATION_SIZE			1
+#define USART3_TXBUFE_OFFSET			11
+#define USART3_TXBUFE_SIZE			1
+#define USART3_RXBUFF_OFFSET			12
+#define USART3_RXBUFF_SIZE			1
+#define USART3_NACK_OFFSET			13
+#define USART3_NACK_SIZE			1
+#define USART3_RIIC_OFFSET			16
+#define USART3_RIIC_SIZE			1
+#define USART3_DSRIC_OFFSET			17
+#define USART3_DSRIC_SIZE			1
+#define USART3_DCDIC_OFFSET			18
+#define USART3_DCDIC_SIZE			1
+#define USART3_CTSIC_OFFSET			19
+#define USART3_CTSIC_SIZE			1
+#define USART3_RI_OFFSET			20
+#define USART3_RI_SIZE				1
+#define USART3_DSR_OFFSET			21
+#define USART3_DSR_SIZE				1
+#define USART3_DCD_OFFSET			22
+#define USART3_DCD_SIZE				1
+#define USART3_CTS_OFFSET			23
+#define USART3_CTS_SIZE				1
+
+/* Bitfields in RHR */
+#define USART3_RXCHR_OFFSET			0
+#define USART3_RXCHR_SIZE			9
+
+/* Bitfields in THR */
+#define USART3_TXCHR_OFFSET			0
+#define USART3_TXCHR_SIZE			9
+
+/* Bitfields in BRGR */
+#define USART3_CD_OFFSET			0
+#define USART3_CD_SIZE				16
+
+/* Bitfields in RTOR */
+#define USART3_TO_OFFSET			0
+#define USART3_TO_SIZE				16
+
+/* Bitfields in TTGR */
+#define USART3_TG_OFFSET			0
+#define USART3_TG_SIZE				8
+
+/* Bitfields in FIDI */
+#define USART3_FI_DI_RATIO_OFFSET		0
+#define USART3_FI_DI_RATIO_SIZE			11
+
+/* Bitfields in NER */
+#define USART3_NB_ERRORS_OFFSET			0
+#define USART3_NB_ERRORS_SIZE			8
+
+/* Bitfields in XXR */
+#define USART3_XOFF_OFFSET			0
+#define USART3_XOFF_SIZE			8
+#define USART3_XON_OFFSET			8
+#define USART3_XON_SIZE				8
+
+/* Bitfields in IFR */
+#define USART3_IRDA_FILTER_OFFSET		0
+#define USART3_IRDA_FILTER_SIZE			8
+
+/* Bitfields in RCR */
+#define USART3_RXCTR_OFFSET			0
+#define USART3_RXCTR_SIZE			16
+
+/* Bitfields in TCR */
+#define USART3_TXCTR_OFFSET			0
+#define USART3_TXCTR_SIZE			16
+
+/* Bitfields in RNCR */
+#define USART3_RXNCR_OFFSET			0
+#define USART3_RXNCR_SIZE			16
+
+/* Bitfields in TNCR */
+#define USART3_TXNCR_OFFSET			0
+#define USART3_TXNCR_SIZE			16
+
+/* Bitfields in PTCR */
+#define USART3_RXTEN_OFFSET			0
+#define USART3_RXTEN_SIZE			1
+#define USART3_RXTDIS_OFFSET			1
+#define USART3_RXTDIS_SIZE			1
+#define USART3_TXTEN_OFFSET			8
+#define USART3_TXTEN_SIZE			1
+#define USART3_TXTDIS_OFFSET			9
+#define USART3_TXTDIS_SIZE			1
+
+/* Constants for USART_MODE */
+#define USART3_USART_MODE_NORMAL		0
+#define USART3_USART_MODE_RS485			1
+#define USART3_USART_MODE_HARDWARE		2
+#define USART3_USART_MODE_MODEM			3
+#define USART3_USART_MODE_ISO7816_T0		4
+#define USART3_USART_MODE_ISO7816_T1		6
+#define USART3_USART_MODE_IRDA			8
+
+/* Constants for USCLKS */
+#define USART3_USCLKS_MCK			0
+#define USART3_USCLKS_MCK_DIV			1
+#define USART3_USCLKS_SCK			3
+
+/* Constants for CHRL */
+#define USART3_CHRL_5				0
+#define USART3_CHRL_6				1
+#define USART3_CHRL_7				2
+#define USART3_CHRL_8				3
+
+/* Constants for PAR */
+#define USART3_PAR_EVEN				0
+#define USART3_PAR_ODD				1
+#define USART3_PAR_SPACE			2
+#define USART3_PAR_MARK				3
+#define USART3_PAR_NONE				4
+#define USART3_PAR_MULTI			6
+
+/* Constants for NBSTOP */
+#define USART3_NBSTOP_1				0
+#define USART3_NBSTOP_1_5			1
+#define USART3_NBSTOP_2				2
+
+/* Constants for CHMODE */
+#define USART3_CHMODE_NORMAL			0
+#define USART3_CHMODE_ECHO			1
+#define USART3_CHMODE_LOCAL_LOOP		2
+#define USART3_CHMODE_REMOTE_LOOP		3
+
+/* Constants for MSBF */
+#define USART3_MSBF_LSBF			0
+#define USART3_MSBF_MSBF			1
+
+/* Constants for OVER */
+#define USART3_OVER_X16				0
+#define USART3_OVER_X8				1
+
+/* Constants for CD */
+#define USART3_CD_DISABLE			0
+#define USART3_CD_BYPASS			1
+
+/* Constants for TO */
+#define USART3_TO_DISABLE			0
+
+/* Constants for TG */
+#define USART3_TG_DISABLE			0
+
+/* Constants for FI_DI_RATIO */
+#define USART3_FI_DI_RATIO_DISABLE		0
+
+/* Bit manipulation macros */
+#define USART3_BIT(name)				\
+	(1 << USART3_##name##_OFFSET)
+#define USART3_BF(name,value)				\
+	(((value) & ((1 << USART3_##name##_SIZE) - 1))	\
+	 << USART3_##name##_OFFSET)
+#define USART3_BFEXT(name,value)			\
+	(((value) >> USART3_##name##_OFFSET)		\
+	 & ((1 << USART3_##name##_SIZE) - 1))
+#define USART3_BFINS(name,value,old)			\
+	(((old) & ~(((1 << USART3_##name##_SIZE) - 1)	\
+		    << USART3_##name##_OFFSET))		\
+	 | USART3_BF(name,value))
+
+/* Register access macros */
+#define usart3_readl(port,reg)				\
+	readl((port)->regs + USART3_##reg)
+#define usart3_writel(port,reg,value)			\
+	writel((value), (port)->regs + USART3_##reg)
+
+#endif /* __DRIVERS_ATMEL_USART_H__ */
diff --git a/drivers/fsl_i2c.c b/drivers/fsl_i2c.c
new file mode 100644
index 0000000..65c2743
--- /dev/null
+++ b/drivers/fsl_i2c.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_HARD_I2C
+
+#include <command.h>
+#include <i2c.h>		/* Functional interface */
+
+#include <asm/io.h>
+#include <asm/fsl_i2c.h>	/* HW definitions */
+
+#define I2C_TIMEOUT	(CFG_HZ / 4)
+#define I2C		((struct fsl_i2c *)(CFG_IMMR + CFG_I2C_OFFSET))
+
+
+void
+i2c_init(int speed, int slaveadd)
+{
+	/* stop I2C controller */
+	writeb(0x0, &I2C->cr);
+
+	/* set clock */
+	writeb(0x3f, &I2C->fdr);
+
+	/* set default filter */
+	writeb(0x10, &I2C->dfsrr);
+
+	/* write slave address */
+	writeb(slaveadd, &I2C->adr);
+
+	/* clear status register */
+	writeb(0x0, &I2C->sr);
+
+	/* start I2C controller */
+	writeb(I2C_CR_MEN, &I2C->cr);
+}
+
+static __inline__ int
+i2c_wait4bus(void)
+{
+	ulong timeval = get_timer(0);
+
+	while (readb(&I2C->sr) & I2C_SR_MBB) {
+		if (get_timer(timeval) > I2C_TIMEOUT) {
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static __inline__ int
+i2c_wait(int write)
+{
+	u32 csr;
+	ulong timeval = get_timer(0);
+
+	do {
+		csr = readb(&I2C->sr);
+		if (!(csr & I2C_SR_MIF))
+			continue;
+
+		writeb(0x0, &I2C->sr);
+
+		if (csr & I2C_SR_MAL) {
+			debug("i2c_wait: MAL\n");
+			return -1;
+		}
+
+		if (!(csr & I2C_SR_MCF))	{
+			debug("i2c_wait: unfinished\n");
+			return -1;
+		}
+
+		if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) {
+			debug("i2c_wait: No RXACK\n");
+			return -1;
+		}
+
+		return 0;
+	} while (get_timer (timeval) < I2C_TIMEOUT);
+
+	debug("i2c_wait: timed out\n");
+	return -1;
+}
+
+static __inline__ int
+i2c_write_addr (u8 dev, u8 dir, int rsta)
+{
+	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
+	       | (rsta ? I2C_CR_RSTA : 0),
+	       &I2C->cr);
+
+	writeb((dev << 1) | dir, &I2C->dr);
+
+	if (i2c_wait(I2C_WRITE) < 0)
+		return 0;
+
+	return 1;
+}
+
+static __inline__ int
+__i2c_write(u8 *data, int length)
+{
+	int i;
+
+	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
+	       &I2C->cr);
+
+	for (i = 0; i < length; i++) {
+		writeb(data[i], &I2C->dr);
+
+		if (i2c_wait(I2C_WRITE) < 0)
+			break;
+	}
+
+	return i;
+}
+
+static __inline__ int
+__i2c_read(u8 *data, int length)
+{
+	int i;
+
+	writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0),
+	       &I2C->cr);
+
+	/* dummy read */
+	readb(&I2C->dr);
+
+	for (i = 0; i < length; i++) {
+		if (i2c_wait(I2C_READ) < 0)
+			break;
+
+		/* Generate ack on last next to last byte */
+		if (i == length - 2)
+			writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK,
+			       &I2C->cr);
+
+		/* Generate stop on last byte */
+		if (i == length - 1)
+			writeb(I2C_CR_MEN | I2C_CR_TXAK, &I2C->cr);
+
+		data[i] = readb(&I2C->dr);
+	}
+
+	return i;
+}
+
+int
+i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+	int i = 0;
+	u8 *a = (u8*)&addr;
+
+	if (i2c_wait4bus() >= 0
+	    && i2c_write_addr(dev, I2C_WRITE, 0) != 0
+	    && __i2c_write(&a[4 - alen], alen) == alen
+	    && i2c_write_addr(dev, I2C_READ, 1) != 0) {
+		i = __i2c_read(data, length);
+	}
+
+	writeb(I2C_CR_MEN, &I2C->cr);
+
+	if (i == length)
+	    return 0;
+
+	return -1;
+}
+
+int
+i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+	int i = 0;
+	u8 *a = (u8*)&addr;
+
+	if (i2c_wait4bus() >= 0
+	    && i2c_write_addr(dev, I2C_WRITE, 0) != 0
+	    && __i2c_write(&a[4 - alen], alen) == alen) {
+		i = __i2c_write(data, length);
+	}
+
+	writeb(I2C_CR_MEN, &I2C->cr);
+
+	if (i == length)
+	    return 0;
+
+	return -1;
+}
+
+int
+i2c_probe(uchar chip)
+{
+	int tmp;
+
+	/*
+	 * Try to read the first location of the chip.  The underlying
+	 * driver doesn't appear to support sending just the chip address
+	 * and looking for an <ACK> back.
+	 */
+	udelay(10000);
+
+	return i2c_read(chip, 0, 1, (uchar *)&tmp, 1);
+}
+
+uchar
+i2c_reg_read(uchar i2c_addr, uchar reg)
+{
+	uchar buf[1];
+
+	i2c_read(i2c_addr, reg, 1, buf, 1);
+
+	return buf[0];
+}
+
+void
+i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
+{
+	i2c_write(i2c_addr, reg, 1, &val, 1);
+}
+
+#endif /* CONFIG_HARD_I2C */
+#endif /* CONFIG_FSL_I2C */
diff --git a/drivers/nand/nand.c b/drivers/nand/nand.c
index e1781fc..3899045 100644
--- a/drivers/nand/nand.c
+++ b/drivers/nand/nand.c
@@ -66,8 +66,15 @@
 		size += nand_info[i].size;
 		if (nand_curr_device == -1)
 			nand_curr_device = i;
-}
+	}
 	printf("%lu MiB\n", size / (1024 * 1024));
+
+#ifdef CFG_NAND_SELECT_DEVICE
+	/*
+	 * Select the chip in the board/cpu specific driver
+	 */
+	board_nand_select_device(nand_info[nand_curr_device].priv, nand_curr_device);
+#endif
 }
 
 #endif
diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c
index 15f7432..9691675 100644
--- a/drivers/pci_auto.c
+++ b/drivers/pci_auto.c
@@ -102,7 +102,8 @@
 
 		/* Check the BAR type and set our address mask */
 		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
-			bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1;
+			bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
+				   & 0xffff) + 1;
 			bar_res = io;
 
 			DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%x, ", bar_nr, bar_size);
@@ -186,7 +187,7 @@
 	} else {
 		/* We don't support prefetchable memory for now, so disable */
 		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
-		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x1000);
+		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
 	}
 
 	if (pci_io) {
diff --git a/drivers/rtl8139.c b/drivers/rtl8139.c
index a95f84e..afe1a4f 100644
--- a/drivers/rtl8139.c
+++ b/drivers/rtl8139.c
@@ -196,6 +196,7 @@
 
 static struct pci_device_id supported[] = {
        {PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139},
+       {PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_8139},
        {}
 };
 
diff --git a/drivers/tsec.c b/drivers/tsec.c
index 7ec565c..770517b 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -1,5 +1,4 @@
 /*
- * tsec.c
  * Freescale Three Speed Ethernet Controller driver
  *
  * This software may be used and distributed according to the
@@ -13,7 +12,6 @@
  */
 
 #include <config.h>
-#include <mpc85xx.h>
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
@@ -27,13 +25,13 @@
 
 #define TX_BUF_CNT		2
 
-static uint rxIdx;	/* index of the current RX buffer */
-static uint txIdx;	/* index of the current TX buffer */
+static uint rxIdx;		/* index of the current RX buffer */
+static uint txIdx;		/* index of the current TX buffer */
 
 typedef volatile struct rtxbd {
 	txbd8_t txbd[TX_BUF_CNT];
 	rxbd8_t rxbd[PKTBUFSRX];
-}  RTXBD;
+} RTXBD;
 
 struct tsec_info_struct {
 	unsigned int phyaddr;
@@ -41,12 +39,9 @@
 	unsigned int phyregidx;
 };
 
-
 /* The tsec_info structure contains 3 values which the
  * driver uses to determine how to operate a given ethernet
- * device.  For now, the structure is initialized with the
- * knowledge that all current implementations have 2 TSEC
- * devices, and one FEC.  The information needed is:
+ * device. The information needed is:
  *  phyaddr - The address of the PHY which is attached to
  *	the given device.
  *
@@ -56,45 +51,47 @@
  *
  *  phyregidx - This variable specifies which ethernet device
  *	controls the MII Management registers which are connected
- *	to the PHY.  For 8540/8560, only TSEC1 (index 0) has
+ *	to the PHY.  For now, only TSEC1 (index 0) has
  *	access to the PHYs, so all of the entries have "0".
  *
  * The values specified in the table are taken from the board's
  * config file in include/configs/.  When implementing a new
  * board with ethernet capability, it is necessary to define:
- *   TSEC1_PHY_ADDR
- *   TSEC1_PHYIDX
- *   TSEC2_PHY_ADDR
- *   TSEC2_PHYIDX
+ *   TSECn_PHY_ADDR
+ *   TSECn_PHYIDX
  *
- * and for 8560:
+ * for n = 1,2,3, etc.  And for FEC:
  *   FEC_PHY_ADDR
  *   FEC_PHYIDX
  */
 static struct tsec_info_struct tsec_info[] = {
 #if defined(CONFIG_MPC85XX_TSEC1) || defined(CONFIG_MPC83XX_TSEC1)
 	{TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX},
+#elif defined(CONFIG_MPC86XX_TSEC1)
+	{TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX},
 #else
-	{ 0, 0, 0},
+	{0, 0, 0},
 #endif
 #if defined(CONFIG_MPC85XX_TSEC2) || defined(CONFIG_MPC83XX_TSEC2)
 	{TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX},
+#elif defined(CONFIG_MPC86XX_TSEC2)
+	{TSEC2_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC2_PHYIDX},
 #else
-	{ 0, 0, 0},
+	{0, 0, 0},
 #endif
 #ifdef CONFIG_MPC85XX_FEC
 	{FEC_PHY_ADDR, 0, FEC_PHYIDX},
 #else
-#    if defined(CONFIG_MPC85XX_TSEC3) || defined(CONFIG_MPC83XX_TSEC3)
+#if defined(CONFIG_MPC85XX_TSEC3) || defined(CONFIG_MPC83XX_TSEC3) || defined(CONFIG_MPC86XX_TSEC3)
 	{TSEC3_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC3_PHYIDX},
-#    else
-	{ 0, 0, 0},
-#    endif
-#    if defined(CONFIG_MPC85XX_TSEC4) || defined(CONFIG_MPC83XX_TSEC4)
-	{TSEC4_PHY_ADDR, TSEC_REDUCED, TSEC4_PHYIDX},
-#    else
-	{ 0, 0, 0},
-#    endif
+#else
+	{0, 0, 0},
+#endif
+#if defined(CONFIG_MPC85XX_TSEC4) || defined(CONFIG_MPC83XX_TSEC4) || defined(CONFIG_MPC86XX_TSEC4)
+	{TSEC4_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC4_PHYIDX},
+#else
+	{0, 0, 0},
+#endif
 #endif
 };
 
@@ -110,68 +107,69 @@
 #error "rtx must be 64-bit aligned"
 #endif
 
-static int tsec_send(struct eth_device* dev, volatile void *packet, int length);
-static int tsec_recv(struct eth_device* dev);
-static int tsec_init(struct eth_device* dev, bd_t * bd);
-static void tsec_halt(struct eth_device* dev);
-static void init_registers(volatile tsec_t *regs);
+static int tsec_send(struct eth_device *dev,
+		     volatile void *packet, int length);
+static int tsec_recv(struct eth_device *dev);
+static int tsec_init(struct eth_device *dev, bd_t * bd);
+static void tsec_halt(struct eth_device *dev);
+static void init_registers(volatile tsec_t * regs);
 static void startup_tsec(struct eth_device *dev);
 static int init_phy(struct eth_device *dev);
 void write_phy_reg(struct tsec_private *priv, uint regnum, uint value);
 uint read_phy_reg(struct tsec_private *priv, uint regnum);
-struct phy_info * get_phy_info(struct eth_device *dev);
+struct phy_info *get_phy_info(struct eth_device *dev);
 void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
 static void adjust_link(struct eth_device *dev);
 static void relocate_cmds(void);
 static int tsec_miiphy_write(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short value);
+			     unsigned char reg, unsigned short value);
 static int tsec_miiphy_read(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short *value);
+			    unsigned char reg, unsigned short *value);
 
 /* Initialize device structure. Returns success if PHY
  * initialization succeeded (i.e. if it recognizes the PHY)
  */
-int tsec_initialize(bd_t *bis, int index, char *devname)
+int tsec_initialize(bd_t * bis, int index, char *devname)
 {
-	struct eth_device* dev;
+	struct eth_device *dev;
 	int i;
 	struct tsec_private *priv;
 
-	dev = (struct eth_device*) malloc(sizeof *dev);
+	dev = (struct eth_device *)malloc(sizeof *dev);
 
-	if(NULL == dev)
+	if (NULL == dev)
 		return 0;
 
 	memset(dev, 0, sizeof *dev);
 
-	priv = (struct tsec_private *) malloc(sizeof(*priv));
+	priv = (struct tsec_private *)malloc(sizeof(*priv));
 
-	if(NULL == priv)
+	if (NULL == priv)
 		return 0;
 
 	privlist[index] = priv;
-	priv->regs = (volatile tsec_t *)(TSEC_BASE_ADDR + index*TSEC_SIZE);
+	priv->regs = (volatile tsec_t *)(TSEC_BASE_ADDR + index * TSEC_SIZE);
 	priv->phyregs = (volatile tsec_t *)(TSEC_BASE_ADDR +
-			tsec_info[index].phyregidx*TSEC_SIZE);
+					    tsec_info[index].phyregidx *
+					    TSEC_SIZE);
 
 	priv->phyaddr = tsec_info[index].phyaddr;
 	priv->flags = tsec_info[index].flags;
 
 	sprintf(dev->name, devname);
 	dev->iobase = 0;
-	dev->priv   = priv;
-	dev->init   = tsec_init;
-	dev->halt   = tsec_halt;
-	dev->send   = tsec_send;
-	dev->recv   = tsec_recv;
+	dev->priv = priv;
+	dev->init = tsec_init;
+	dev->halt = tsec_halt;
+	dev->send = tsec_send;
+	dev->recv = tsec_recv;
 
 	/* Tell u-boot to get the addr from the env */
-	for(i=0;i<6;i++)
+	for (i = 0; i < 6; i++)
 		dev->enetaddr[i] = 0;
 
 	eth_register(dev);
 
-
 	/* Reset the MAC */
 	priv->regs->maccfg1 |= MACCFG1_SOFT_RESET;
 	priv->regs->maccfg1 &= ~(MACCFG1_SOFT_RESET);
@@ -185,12 +183,12 @@
 	return init_phy(dev);
 }
 
-
 /* Initializes data structures and registers for the controller,
  * and brings the interface up.	 Returns the link status, meaning
  * that it returns success if the link is up, failure otherwise.
- * This allows u-boot to find the first active controller. */
-int tsec_init(struct eth_device* dev, bd_t * bd)
+ * This allows u-boot to find the first active controller.
+ */
+int tsec_init(struct eth_device *dev, bd_t * bd)
 {
 	uint tempval;
 	char tmpbuf[MAC_ADDR_LEN];
@@ -209,12 +207,12 @@
 
 	/* Copy the station address into the address registers.
 	 * Backwards, because little endian MACS are dumb */
-	for(i=0;i<MAC_ADDR_LEN;i++) {
+	for (i = 0; i < MAC_ADDR_LEN; i++) {
 		tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i];
 	}
-	regs->macstnaddr1 = *((uint *)(tmpbuf));
+	regs->macstnaddr1 = *((uint *) (tmpbuf));
 
-	tempval = *((uint *)(tmpbuf +4));
+	tempval = *((uint *) (tmpbuf + 4));
 
 	regs->macstnaddr2 = tempval;
 
@@ -233,7 +231,6 @@
 
 }
 
-
 /* Write value to the device's PHY through the registers
  * specified in priv, modifying the register specified in regnum.
  * It will wait for the write to be done (or for a timeout to
@@ -243,17 +240,16 @@
 {
 	volatile tsec_t *regbase = priv->phyregs;
 	uint phyid = priv->phyaddr;
-	int timeout=1000000;
+	int timeout = 1000000;
 
 	regbase->miimadd = (phyid << 8) | regnum;
 	regbase->miimcon = value;
 	asm("sync");
 
-	timeout=1000000;
-	while((regbase->miimind & MIIMIND_BUSY) && timeout--);
+	timeout = 1000000;
+	while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ;
 }
 
-
 /* Reads register regnum on the device's PHY through the
  * registers specified in priv.	 It lowers and raises the read
  * command, and waits for the data to become valid (miimind
@@ -279,7 +275,7 @@
 	asm("sync");
 
 	/* Wait for the the indication that the read is done */
-	while((regbase->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY)));
+	while ((regbase->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY))) ;
 
 	/* Grab the value read from the PHY */
 	value = regbase->miimstat;
@@ -287,7 +283,6 @@
 	return value;
 }
 
-
 /* Discover which PHY is attached to the device, and configure it
  * properly.  If the PHY is not recognized, then return 0
  * (failure).  Otherwise, return 1
@@ -296,32 +291,29 @@
 {
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
 	struct phy_info *curphy;
+	volatile tsec_t *regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
 
 	/* Assign a Physical address to the TBI */
-
-	{
-		volatile tsec_t *regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
-		regs->tbipa = TBIPA_VALUE;
-		regs = (volatile tsec_t *)(TSEC_BASE_ADDR + TSEC_SIZE);
-		regs->tbipa = TBIPA_VALUE;
-		asm("sync");
-	}
+	regs->tbipa = TBIPA_VALUE;
+	regs = (volatile tsec_t *)(TSEC_BASE_ADDR + TSEC_SIZE);
+	regs->tbipa = TBIPA_VALUE;
+	asm("sync");
 
 	/* Reset MII (due to new addresses) */
 	priv->phyregs->miimcfg = MIIMCFG_RESET;
 	asm("sync");
 	priv->phyregs->miimcfg = MIIMCFG_INIT_VALUE;
 	asm("sync");
-	while(priv->phyregs->miimind & MIIMIND_BUSY);
+	while (priv->phyregs->miimind & MIIMIND_BUSY) ;
 
-	if(0 == relocated)
+	if (0 == relocated)
 		relocate_cmds();
 
 	/* Get the cmd structure corresponding to the attached
 	 * PHY */
 	curphy = get_phy_info(dev);
 
-	if(NULL == curphy) {
+	if (NULL == curphy) {
 		printf("%s: No PHY found\n", dev->name);
 
 		return 0;
@@ -334,49 +326,53 @@
 	return 1;
 }
 
-
-/* Returns which value to write to the control register. */
-/* For 10/100, the value is slightly different */
-uint mii_cr_init(uint mii_reg, struct tsec_private *priv)
+/*
+ * Returns which value to write to the control register.
+ * For 10/100, the value is slightly different
+ */
+uint mii_cr_init(uint mii_reg, struct tsec_private * priv)
 {
-	if(priv->flags & TSEC_GIGABIT)
+	if (priv->flags & TSEC_GIGABIT)
 		return MIIM_CONTROL_INIT;
 	else
 		return MIIM_CR_INIT;
 }
 
-
 /* Parse the status register for link, and then do
- * auto-negotiation */
-uint mii_parse_sr(uint mii_reg, struct tsec_private *priv)
+ * auto-negotiation
+ */
+uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
 {
 	/*
-	 * Wait if PHY is capable of autonegotiation and autonegotiation is not complete
+	 * Wait if PHY is capable of autonegotiation and autonegotiation
+	 * is not complete.
 	 */
 	mii_reg = read_phy_reg(priv, MIIM_STATUS);
-	if ((mii_reg & PHY_BMSR_AUTN_ABLE) && !(mii_reg & PHY_BMSR_AUTN_COMP)) {
+	if ((mii_reg & PHY_BMSR_AUTN_ABLE)
+	    && !(mii_reg & PHY_BMSR_AUTN_COMP)) {
 		int i = 0;
 
-		puts ("Waiting for PHY auto negotiation to complete");
-		while (!((mii_reg & PHY_BMSR_AUTN_COMP) && (mii_reg & MIIM_STATUS_LINK))) {
+		puts("Waiting for PHY auto negotiation to complete");
+		while (!((mii_reg & PHY_BMSR_AUTN_COMP)
+			 && (mii_reg & MIIM_STATUS_LINK))) {
 			/*
 			 * Timeout reached ?
 			 */
 			if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
-				puts (" TIMEOUT !\n");
+				puts(" TIMEOUT !\n");
 				priv->link = 0;
-				break;
+				return 0;
 			}
 
 			if ((i++ % 1000) == 0) {
-				putc ('.');
+				putc('.');
 			}
-			udelay (1000);	/* 1 ms */
+			udelay(1000);	/* 1 ms */
 			mii_reg = read_phy_reg(priv, MIIM_STATUS);
 		}
-		puts (" done\n");
+		puts(" done\n");
 		priv->link = 1;
-		udelay (500000);	/* another 500 ms (results in faster booting) */
+		udelay(500000);	/* another 500 ms (results in faster booting) */
 	} else {
 		priv->link = 1;
 	}
@@ -384,10 +380,10 @@
 	return 0;
 }
 
-
 /* Parse the 88E1011's status register for speed and duplex
- * information */
-uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private *priv)
+ * information
+ */
+uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv)
 {
 	uint speed;
 
@@ -397,88 +393,116 @@
 	      (mii_reg & MIIM_88E1011_PHYSTAT_LINK))) {
 		int i = 0;
 
-		puts ("Waiting for PHY realtime link");
+		puts("Waiting for PHY realtime link");
 		while (!((mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE) &&
 			 (mii_reg & MIIM_88E1011_PHYSTAT_LINK))) {
 			/*
 			 * Timeout reached ?
 			 */
 			if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
-				puts (" TIMEOUT !\n");
+				puts(" TIMEOUT !\n");
 				priv->link = 0;
 				break;
 			}
 
 			if ((i++ % 1000) == 0) {
-				putc ('.');
+				putc('.');
 			}
-			udelay (1000);	/* 1 ms */
+			udelay(1000);	/* 1 ms */
 			mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS);
 		}
-		puts (" done\n");
-		udelay (500000);	/* another 500 ms (results in faster booting) */
+		puts(" done\n");
+		udelay(500000);	/* another 500 ms (results in faster booting) */
 	}
 
-	if(mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
+	if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
 		priv->duplexity = 1;
 	else
 		priv->duplexity = 0;
 
-	speed = (mii_reg &MIIM_88E1011_PHYSTAT_SPEED);
+	speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED);
 
-	switch(speed) {
-		case MIIM_88E1011_PHYSTAT_GBIT:
-			priv->speed = 1000;
-			break;
-		case MIIM_88E1011_PHYSTAT_100:
-			priv->speed = 100;
-			break;
-		default:
-			priv->speed = 10;
+	switch (speed) {
+	case MIIM_88E1011_PHYSTAT_GBIT:
+		priv->speed = 1000;
+		break;
+	case MIIM_88E1011_PHYSTAT_100:
+		priv->speed = 100;
+		break;
+	default:
+		priv->speed = 10;
 	}
 
 	return 0;
 }
 
-
 /* Parse the cis8201's status register for speed and duplex
- * information */
-uint mii_parse_cis8201(uint mii_reg, struct tsec_private *priv)
+ * information
+ */
+uint mii_parse_cis8201(uint mii_reg, struct tsec_private * priv)
 {
 	uint speed;
 
-	if(mii_reg & MIIM_CIS8201_AUXCONSTAT_DUPLEX)
+	if (mii_reg & MIIM_CIS8201_AUXCONSTAT_DUPLEX)
 		priv->duplexity = 1;
 	else
 		priv->duplexity = 0;
 
 	speed = mii_reg & MIIM_CIS8201_AUXCONSTAT_SPEED;
-	switch(speed) {
-		case MIIM_CIS8201_AUXCONSTAT_GBIT:
-			priv->speed = 1000;
-			break;
-		case MIIM_CIS8201_AUXCONSTAT_100:
-			priv->speed = 100;
-			break;
-		default:
-			priv->speed = 10;
-			break;
+	switch (speed) {
+	case MIIM_CIS8201_AUXCONSTAT_GBIT:
+		priv->speed = 1000;
+		break;
+	case MIIM_CIS8201_AUXCONSTAT_100:
+		priv->speed = 100;
+		break;
+	default:
+		priv->speed = 10;
+		break;
 	}
 
 	return 0;
 }
 
+/* Parse the vsc8244's status register for speed and duplex
+ * information
+ */
+uint mii_parse_vsc8244(uint mii_reg, struct tsec_private * priv)
+{
+	uint speed;
+
+	if (mii_reg & MIIM_VSC8244_AUXCONSTAT_DUPLEX)
+		priv->duplexity = 1;
+	else
+		priv->duplexity = 0;
+
+	speed = mii_reg & MIIM_VSC8244_AUXCONSTAT_SPEED;
+	switch (speed) {
+	case MIIM_VSC8244_AUXCONSTAT_GBIT:
+		priv->speed = 1000;
+		break;
+	case MIIM_VSC8244_AUXCONSTAT_100:
+		priv->speed = 100;
+		break;
+	default:
+		priv->speed = 10;
+		break;
+	}
+
+	return 0;
+}
 
 /* Parse the DM9161's status register for speed and duplex
- * information */
-uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private *priv)
+ * information
+ */
+uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
 {
-	if(mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
+	if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
 		priv->speed = 100;
 	else
 		priv->speed = 10;
 
-	if(mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F))
+	if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F))
 		priv->duplexity = 1;
 	else
 		priv->duplexity = 0;
@@ -486,27 +510,28 @@
 	return 0;
 }
 
-
-/* Hack to write all 4 PHYs with the LED values */
-uint mii_cis8204_fixled(uint mii_reg, struct tsec_private *priv)
+/*
+ * Hack to write all 4 PHYs with the LED values
+ */
+uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
 {
 	uint phyid;
 	volatile tsec_t *regbase = priv->phyregs;
-	int timeout=1000000;
+	int timeout = 1000000;
 
-	for(phyid=0;phyid<4;phyid++) {
+	for (phyid = 0; phyid < 4; phyid++) {
 		regbase->miimadd = (phyid << 8) | mii_reg;
 		regbase->miimcon = MIIM_CIS8204_SLEDCON_INIT;
 		asm("sync");
 
-		timeout=1000000;
-		while((regbase->miimind & MIIMIND_BUSY) && timeout--);
+		timeout = 1000000;
+		while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ;
 	}
 
 	return MIIM_CIS8204_SLEDCON_INIT;
 }
 
-uint mii_cis8204_setmode(uint mii_reg, struct tsec_private *priv)
+uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv)
 {
 	if (priv->flags & TSEC_REDUCED)
 		return MIIM_CIS8204_EPHYCON_INIT | MIIM_CIS8204_EPHYCON_RGMII;
@@ -516,8 +541,9 @@
 
 /* Initialized required registers to appropriate values, zeroing
  * those we don't care about (unless zero is bad, in which case,
- * choose a more appropriate value) */
-static void init_registers(volatile tsec_t *regs)
+ * choose a more appropriate value)
+ */
+static void init_registers(volatile tsec_t * regs)
 {
 	/* Clear IEVENT */
 	regs->ievent = IEVENT_INIT_CLEAR;
@@ -559,55 +585,55 @@
 
 }
 
-
 /* Configure maccfg2 based on negotiated speed and duplex
- * reported by PHY handling code */
+ * reported by PHY handling code
+ */
 static void adjust_link(struct eth_device *dev)
 {
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
 	volatile tsec_t *regs = priv->regs;
 
-	if(priv->link) {
-		if(priv->duplexity != 0)
+	if (priv->link) {
+		if (priv->duplexity != 0)
 			regs->maccfg2 |= MACCFG2_FULL_DUPLEX;
 		else
 			regs->maccfg2 &= ~(MACCFG2_FULL_DUPLEX);
 
-		switch(priv->speed) {
-			case 1000:
-				regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF))
-					| MACCFG2_GMII);
-				break;
-			case 100:
-			case 10:
-				regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF))
-					| MACCFG2_MII);
+		switch (priv->speed) {
+		case 1000:
+			regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF))
+					 | MACCFG2_GMII);
+			break;
+		case 100:
+		case 10:
+			regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF))
+					 | MACCFG2_MII);
 
-				/* If We're in reduced mode, we need
-				 * to say whether we're 10 or 100 MB.
-				 */
-				if ((priv->speed == 100)
-				    && (priv->flags & TSEC_REDUCED))
-					regs->ecntrl |= ECNTRL_R100;
-				else
-					regs->ecntrl &= ~(ECNTRL_R100);
-				break;
-			default:
-				printf("%s: Speed was bad\n", dev->name);
-				break;
+			/* If We're in reduced mode, we need
+			 * to say whether we're 10 or 100 MB.
+			 */
+			if ((priv->speed == 100)
+			    && (priv->flags & TSEC_REDUCED))
+				regs->ecntrl |= ECNTRL_R100;
+			else
+				regs->ecntrl &= ~(ECNTRL_R100);
+			break;
+		default:
+			printf("%s: Speed was bad\n", dev->name);
+			break;
 		}
 
 		printf("Speed: %d, %s duplex\n", priv->speed,
-				(priv->duplexity) ? "full" : "half");
+		       (priv->duplexity) ? "full" : "half");
 
 	} else {
 		printf("%s: No link.\n", dev->name);
 	}
 }
 
-
 /* Set up the buffers and their descriptors, and bring up the
- * interface */
+ * interface
+ */
 static void startup_tsec(struct eth_device *dev)
 {
 	int i;
@@ -622,17 +648,17 @@
 	for (i = 0; i < PKTBUFSRX; i++) {
 		rtx.rxbd[i].status = RXBD_EMPTY;
 		rtx.rxbd[i].length = 0;
-		rtx.rxbd[i].bufPtr = (uint)NetRxPackets[i];
+		rtx.rxbd[i].bufPtr = (uint) NetRxPackets[i];
 	}
-	rtx.rxbd[PKTBUFSRX -1].status |= RXBD_WRAP;
+	rtx.rxbd[PKTBUFSRX - 1].status |= RXBD_WRAP;
 
 	/* Initialize the TX Buffer Descriptors */
-	for(i=0; i<TX_BUF_CNT; i++) {
+	for (i = 0; i < TX_BUF_CNT; i++) {
 		rtx.txbd[i].status = 0;
 		rtx.txbd[i].length = 0;
 		rtx.txbd[i].bufPtr = 0;
 	}
-	rtx.txbd[TX_BUF_CNT -1].status |= TXBD_WRAP;
+	rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP;
 
 	/* Start up the PHY */
 	phy_run_commands(priv, priv->phyinfo->startup);
@@ -650,8 +676,9 @@
 /* This returns the status bits of the device.	The return value
  * is never checked, and this is what the 8260 driver did, so we
  * do the same.	 Presumably, this would be zero if there were no
- * errors */
-static int tsec_send(struct eth_device* dev, volatile void *packet, int length)
+ * errors
+ */
+static int tsec_send(struct eth_device *dev, volatile void *packet, int length)
 {
 	int i;
 	int result = 0;
@@ -659,24 +686,25 @@
 	volatile tsec_t *regs = priv->regs;
 
 	/* Find an empty buffer descriptor */
-	for(i=0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
+	for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
 		if (i >= TOUT_LOOP) {
-			debug ("%s: tsec: tx buffers full\n", dev->name);
+			debug("%s: tsec: tx buffers full\n", dev->name);
 			return result;
 		}
 	}
 
-	rtx.txbd[txIdx].bufPtr = (uint)packet;
+	rtx.txbd[txIdx].bufPtr = (uint) packet;
 	rtx.txbd[txIdx].length = length;
-	rtx.txbd[txIdx].status |= (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT);
+	rtx.txbd[txIdx].status |=
+	    (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT);
 
 	/* Tell the DMA to go */
 	regs->tstat = TSTAT_CLEAR_THALT;
 
 	/* Wait for buffer to be transmitted */
-	for(i=0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
+	for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
 		if (i >= TOUT_LOOP) {
-			debug ("%s: tsec: tx error\n", dev->name);
+			debug("%s: tsec: tx error\n", dev->name);
 			return result;
 		}
 	}
@@ -687,13 +715,13 @@
 	return result;
 }
 
-static int tsec_recv(struct eth_device* dev)
+static int tsec_recv(struct eth_device *dev)
 {
 	int length;
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
 	volatile tsec_t *regs = priv->regs;
 
-	while(!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
+	while (!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
 
 		length = rtx.rxbd[rxIdx].length;
 
@@ -702,18 +730,19 @@
 			NetReceive(NetRxPackets[rxIdx], length - 4);
 		} else {
 			printf("Got error %x\n",
-					(rtx.rxbd[rxIdx].status & RXBD_STATS));
+			       (rtx.rxbd[rxIdx].status & RXBD_STATS));
 		}
 
 		rtx.rxbd[rxIdx].length = 0;
 
 		/* Set the wrap bit if this is the last element in the list */
-		rtx.rxbd[rxIdx].status = RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
+		rtx.rxbd[rxIdx].status =
+		    RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
 
 		rxIdx = (rxIdx + 1) % PKTBUFSRX;
 	}
 
-	if(regs->ievent&IEVENT_BSY) {
+	if (regs->ievent & IEVENT_BSY) {
 		regs->ievent = IEVENT_BSY;
 		regs->rstat = RSTAT_CLEAR_RHALT;
 	}
@@ -722,9 +751,8 @@
 
 }
 
-
 /* Stop the interface */
-static void tsec_halt(struct eth_device* dev)
+static void tsec_halt(struct eth_device *dev)
 {
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
 	volatile tsec_t *regs = priv->regs;
@@ -732,7 +760,7 @@
 	regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
 	regs->dmactrl |= (DMACTRL_GRS | DMACTRL_GTS);
 
-	while(!(regs->ievent & (IEVENT_GRSC | IEVENT_GTSC)));
+	while (!(regs->ievent & (IEVENT_GRSC | IEVENT_GTSC))) ;
 
 	regs->maccfg1 &= ~(MACCFG1_TX_EN | MACCFG1_RX_EN);
 
@@ -740,96 +768,152 @@
 	phy_run_commands(priv, priv->phyinfo->shutdown);
 }
 
-
 struct phy_info phy_info_M88E1011S = {
 	0x01410c6,
 	"Marvell 88E1011S",
 	4,
-	(struct phy_cmd[]) { /* config */
-		/* Reset and configure the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{0x1d, 0x1f, NULL},
-		{0x1e, 0x200c, NULL},
-		{0x1d, 0x5, NULL},
-		{0x1e, 0x0, NULL},
-		{0x1e, 0x100, NULL},
-		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
+	(struct phy_cmd[]){	/* config */
+			   /* Reset and configure the PHY */
+			   {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+			   {0x1d, 0x1f, NULL},
+			   {0x1e, 0x200c, NULL},
+			   {0x1d, 0x5, NULL},
+			   {0x1e, 0x0, NULL},
+			   {0x1e, 0x100, NULL},
+			   {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+			   {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+			   {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+			   {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* startup */
+			   /* Status is read once to clear old link state */
+			   {MIIM_STATUS, miim_read, NULL},
+			   /* Auto-negotiate */
+			   {MIIM_STATUS, miim_read, &mii_parse_sr},
+			   /* Read the status */
+			   {MIIM_88E1011_PHY_STATUS, miim_read,
+			    &mii_parse_88E1011_psr},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* shutdown */
+			   {miim_end,}
+			   },
 };
 
 struct phy_info phy_info_M88E1111S = {
 	0x01410cc,
 	"Marvell 88E1111S",
 	4,
-	(struct phy_cmd[]) { /* config */
-	  /* Reset and configure the PHY */
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{0x1d, 0x1f, NULL},
-		{0x1e, 0x200c, NULL},
-		{0x1d, 0x5, NULL},
-		{0x1e, 0x0, NULL},
-		{0x1e, 0x100, NULL},
-		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-	  /* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
+	(struct phy_cmd[]){	/* config */
+			   /* Reset and configure the PHY */
+			   {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+			   {0x1d, 0x1f, NULL},
+			   {0x1e, 0x200c, NULL},
+			   {0x1d, 0x5, NULL},
+			   {0x1e, 0x0, NULL},
+			   {0x1e, 0x100, NULL},
+			   {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+			   {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+			   {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+			   {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* startup */
+			   /* Status is read once to clear old link state */
+			   {MIIM_STATUS, miim_read, NULL},
+			   /* Auto-negotiate */
+			   {MIIM_STATUS, miim_read, &mii_parse_sr},
+			   /* Read the status */
+			   {MIIM_88E1011_PHY_STATUS, miim_read,
+			    &mii_parse_88E1011_psr},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* shutdown */
+			   {miim_end,}
+			   },
+};
+
+static unsigned int m88e1145_setmode(uint mii_reg, struct tsec_private *priv)
+{
+	uint mii_data = read_phy_reg(priv, mii_reg);
+
+	/* Setting MIIM_88E1145_PHY_EXT_CR */
+	if (priv->flags & TSEC_REDUCED)
+		return mii_data |
+		    MIIM_M88E1145_RGMII_RX_DELAY | MIIM_M88E1145_RGMII_TX_DELAY;
+	else
+		return mii_data;
+}
+
+static struct phy_info phy_info_M88E1145 = {
+	0x01410cd,
+	"Marvell 88E1145",
+	4,
+	(struct phy_cmd[]){	/* config */
+			   /* Errata E0, E1 */
+			   {29, 0x001b, NULL},
+			   {30, 0x418f, NULL},
+			   {29, 0x0016, NULL},
+			   {30, 0xa2da, NULL},
+
+			   /* Reset and configure the PHY */
+			   {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+			   {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+			   {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+			   {MIIM_88E1011_PHY_SCR, MIIM_88E1011_PHY_MDI_X_AUTO,
+			    NULL},
+			   {MIIM_88E1145_PHY_EXT_CR, 0, &m88e1145_setmode},
+			   {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+			   {MIIM_CONTROL, MIIM_CONTROL_INIT, NULL},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* startup */
+			   /* Status is read once to clear old link state */
+			   {MIIM_STATUS, miim_read, NULL},
+			   /* Auto-negotiate */
+			   {MIIM_STATUS, miim_read, &mii_parse_sr},
+			   {MIIM_88E1111_PHY_LED_CONTROL,
+			    MIIM_88E1111_PHY_LED_DIRECT, NULL},
+			   /* Read the Status */
+			   {MIIM_88E1011_PHY_STATUS, miim_read,
+			    &mii_parse_88E1011_psr},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* shutdown */
+			   {miim_end,}
+			   },
 };
 
 struct phy_info phy_info_cis8204 = {
 	0x3f11,
 	"Cicada Cis8204",
 	6,
-	(struct phy_cmd[]) { /* config */
-		/* Override PHY config settings */
-		{MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT, &mii_cis8204_fixled},
-		{MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT, &mii_cis8204_setmode},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		/* Read the Status (2x to make sure link is right) */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
+	(struct phy_cmd[]){	/* config */
+			   /* Override PHY config settings */
+			   {MIIM_CIS8201_AUX_CONSTAT,
+			    MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
+			   /* Configure some basic stuff */
+			   {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+			   {MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT,
+			    &mii_cis8204_fixled},
+			   {MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT,
+			    &mii_cis8204_setmode},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* startup */
+			   /* Read the Status (2x to make sure link is right) */
+			   {MIIM_STATUS, miim_read, NULL},
+			   /* Auto-negotiate */
+			   {MIIM_STATUS, miim_read, &mii_parse_sr},
+			   /* Read the status */
+			   {MIIM_CIS8201_AUX_CONSTAT, miim_read,
+			    &mii_parse_cis8201},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* shutdown */
+			   {miim_end,}
+			   },
 };
 
 /* Cicada 8201 */
@@ -837,58 +921,86 @@
 	0xfc41,
 	"CIS8201",
 	4,
-	(struct phy_cmd[]) { /* config */
-		/* Override PHY config settings */
-		{MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
-		/* Set up the interface mode */
-		{MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL},
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		/* Read the Status (2x to make sure link is right) */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
+	(struct phy_cmd[]){	/* config */
+			   /* Override PHY config settings */
+			   {MIIM_CIS8201_AUX_CONSTAT,
+			    MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
+			   /* Set up the interface mode */
+			   {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT,
+			    NULL},
+			   /* Configure some basic stuff */
+			   {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* startup */
+			   /* Read the Status (2x to make sure link is right) */
+			   {MIIM_STATUS, miim_read, NULL},
+			   /* Auto-negotiate */
+			   {MIIM_STATUS, miim_read, &mii_parse_sr},
+			   /* Read the status */
+			   {MIIM_CIS8201_AUX_CONSTAT, miim_read,
+			    &mii_parse_cis8201},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* shutdown */
+			   {miim_end,}
+			   },
 };
-
+struct phy_info phy_info_VSC8244 = {
+	0x3f1b,
+	"Vitesse VSC8244",
+	6,
+	(struct phy_cmd[]){	/* config */
+			   /* Override PHY config settings */
+			   /* Configure some basic stuff */
+			   {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* startup */
+			   /* Read the Status (2x to make sure link is right) */
+			   {MIIM_STATUS, miim_read, NULL},
+			   /* Auto-negotiate */
+			   {MIIM_STATUS, miim_read, &mii_parse_sr},
+			   /* Read the status */
+			   {MIIM_VSC8244_AUX_CONSTAT, miim_read,
+			    &mii_parse_vsc8244},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* shutdown */
+			   {miim_end,}
+			   },
+};
 
 struct phy_info phy_info_dm9161 = {
 	0x0181b88,
 	"Davicom DM9161E",
 	4,
-	(struct phy_cmd[]) { /* config */
-		{MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL},
-		/* Do not bypass the scrambler/descrambler */
-		{MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL},
-		/* Clear 10BTCSR to default */
-		{MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT, NULL},
-		/* Configure some basic stuff */
-		{MIIM_CONTROL, MIIM_CR_INIT, NULL},
-		/* Restart Auto Negotiation */
-		{MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the status */
-		{MIIM_DM9161_SCSR, miim_read, &mii_parse_dm9161_scsr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
+	(struct phy_cmd[]){	/* config */
+			   {MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL},
+			   /* Do not bypass the scrambler/descrambler */
+			   {MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL},
+			   /* Clear 10BTCSR to default */
+			   {MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT,
+			    NULL},
+			   /* Configure some basic stuff */
+			   {MIIM_CONTROL, MIIM_CR_INIT, NULL},
+			   /* Restart Auto Negotiation */
+			   {MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* startup */
+			   /* Status is read once to clear old link state */
+			   {MIIM_STATUS, miim_read, NULL},
+			   /* Auto-negotiate */
+			   {MIIM_STATUS, miim_read, &mii_parse_sr},
+			   /* Read the status */
+			   {MIIM_DM9161_SCSR, miim_read,
+			    &mii_parse_dm9161_scsr},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* shutdown */
+			   {miim_end,}
+			   },
 };
 
 uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
@@ -926,24 +1038,25 @@
 	0x0001378e,
 	"LXT971",
 	4,
-	(struct phy_cmd []) {  /* config */
-		{ MIIM_CR, MIIM_CR_INIT, mii_cr_init }, /* autonegotiate */
-		{ miim_end, }
-	},
-	(struct phy_cmd []) {  /* startup - enable interrupts */
-		/* { 0x12, 0x00f2, NULL }, */
-		{ MIIM_STATUS, miim_read, NULL },
-		{ MIIM_STATUS, miim_read, &mii_parse_sr },
-		{ MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2 },
-		{ miim_end, }
-	},
-	(struct phy_cmd []) {  /* shutdown - disable interrupts */
-		{ miim_end, }
-	},
+	(struct phy_cmd[]){	/* config */
+			   {MIIM_CR, MIIM_CR_INIT, mii_cr_init},	/* autonegotiate */
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* startup - enable interrupts */
+			   /* { 0x12, 0x00f2, NULL }, */
+			   {MIIM_STATUS, miim_read, NULL},
+			   {MIIM_STATUS, miim_read, &mii_parse_sr},
+			   {MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* shutdown - disable interrupts */
+			   {miim_end,}
+			   },
 };
 
 /* Parse the DP83865's link and auto-neg status register for speed and duplex
- * information */
+ * information
+ */
 uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv)
 {
 	switch (mii_reg & MIIM_DP83865_SPD_MASK) {
@@ -974,22 +1087,23 @@
 	0x20005c7,
 	"NatSemi DP83865",
 	4,
-	(struct phy_cmd[]) { /* config */
-		{MIIM_CONTROL, MIIM_DP83865_CR_INIT, NULL},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* startup */
-		/* Status is read once to clear old link state */
-		{MIIM_STATUS, miim_read, NULL},
-		/* Auto-negotiate */
-		{MIIM_STATUS, miim_read, &mii_parse_sr},
-		/* Read the link and auto-neg status */
-		{MIIM_DP83865_LANR, miim_read, &mii_parse_dp83865_lanr},
-		{miim_end,}
-	},
-	(struct phy_cmd[]) { /* shutdown */
-		{miim_end,}
-	},
+	(struct phy_cmd[]){	/* config */
+			   {MIIM_CONTROL, MIIM_DP83865_CR_INIT, NULL},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* startup */
+			   /* Status is read once to clear old link state */
+			   {MIIM_STATUS, miim_read, NULL},
+			   /* Auto-negotiate */
+			   {MIIM_STATUS, miim_read, &mii_parse_sr},
+			   /* Read the link and auto-neg status */
+			   {MIIM_DP83865_LANR, miim_read,
+			    &mii_parse_dp83865_lanr},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* shutdown */
+			   {miim_end,}
+			   },
 };
 
 struct phy_info *phy_info[] = {
@@ -999,17 +1113,19 @@
 	&phy_info_cis8204,
 	&phy_info_M88E1011S,
 	&phy_info_M88E1111S,
+	&phy_info_M88E1145,
 	&phy_info_dm9161,
 	&phy_info_lxt971,
+	&phy_info_VSC8244,
 	&phy_info_dp83865,
 	NULL
 };
 
-
 /* Grab the identifier of the device's PHY, and search through
  * all of the known PHYs to see if one matches.	 If so, return
- * it, if not, return NULL */
-struct phy_info * get_phy_info(struct eth_device *dev)
+ * it, if not, return NULL
+ */
+struct phy_info *get_phy_info(struct eth_device *dev)
 {
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
 	uint phy_reg, phy_ID;
@@ -1026,13 +1142,12 @@
 
 	/* loop through all the known PHY types, and find one that */
 	/* matches the ID we read from the PHY. */
-	for(i=0; phy_info[i]; i++) {
-		if(phy_info[i]->id == (phy_ID >> phy_info[i]->shift))
+	for (i = 0; phy_info[i]; i++) {
+		if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift))
 			theInfo = phy_info[i];
 	}
 
-	if(theInfo == NULL)
-	{
+	if (theInfo == NULL) {
 		printf("%s: PHY id %x is not supported!\n", dev->name, phy_ID);
 		return NULL;
 	} else {
@@ -1042,9 +1157,9 @@
 	return theInfo;
 }
 
-
 /* Execute the given series of commands on the given device's
- * PHY, running functions as necessary*/
+ * PHY, running functions as necessary
+ */
 void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
 {
 	int i;
@@ -1055,18 +1170,18 @@
 
 	phyregs->miimcfg = MIIMCFG_INIT_VALUE;
 
-	while(phyregs->miimind & MIIMIND_BUSY);
+	while (phyregs->miimind & MIIMIND_BUSY) ;
 
-	for(i=0;cmd->mii_reg != miim_end;i++) {
-		if(cmd->mii_data == miim_read) {
+	for (i = 0; cmd->mii_reg != miim_end; i++) {
+		if (cmd->mii_data == miim_read) {
 			result = read_phy_reg(priv, cmd->mii_reg);
 
-			if(cmd->funct != NULL)
-				(*(cmd->funct))(result, priv);
+			if (cmd->funct != NULL)
+				(*(cmd->funct)) (result, priv);
 
 		} else {
-			if(cmd->funct != NULL)
-				result = (*(cmd->funct))(cmd->mii_reg, priv);
+			if (cmd->funct != NULL)
+				result = (*(cmd->funct)) (cmd->mii_reg, priv);
 			else
 				result = cmd->mii_data;
 
@@ -1077,37 +1192,38 @@
 	}
 }
 
-
 /* Relocate the function pointers in the phy cmd lists */
 static void relocate_cmds(void)
 {
 	struct phy_cmd **cmdlistptr;
 	struct phy_cmd *cmd;
-	int i,j,k;
+	int i, j, k;
 
-	for(i=0; phy_info[i]; i++) {
+	for (i = 0; phy_info[i]; i++) {
 		/* First thing's first: relocate the pointers to the
 		 * PHY command structures (the structs were done) */
-		phy_info[i] = (struct phy_info *) ((uint)phy_info[i]
-				+ gd->reloc_off);
+		phy_info[i] = (struct phy_info *)((uint) phy_info[i]
+						  + gd->reloc_off);
 		phy_info[i]->name += gd->reloc_off;
 		phy_info[i]->config =
-			(struct phy_cmd *)((uint)phy_info[i]->config
-					   + gd->reloc_off);
+		    (struct phy_cmd *)((uint) phy_info[i]->config
+				       + gd->reloc_off);
 		phy_info[i]->startup =
-			(struct phy_cmd *)((uint)phy_info[i]->startup
-					   + gd->reloc_off);
+		    (struct phy_cmd *)((uint) phy_info[i]->startup
+				       + gd->reloc_off);
 		phy_info[i]->shutdown =
-			(struct phy_cmd *)((uint)phy_info[i]->shutdown
-					   + gd->reloc_off);
+		    (struct phy_cmd *)((uint) phy_info[i]->shutdown
+				       + gd->reloc_off);
 
 		cmdlistptr = &phy_info[i]->config;
-		j=0;
-		for(;cmdlistptr <= &phy_info[i]->shutdown;cmdlistptr++) {
-			k=0;
-			for(cmd=*cmdlistptr;cmd->mii_reg != miim_end;cmd++) {
+		j = 0;
+		for (; cmdlistptr <= &phy_info[i]->shutdown; cmdlistptr++) {
+			k = 0;
+			for (cmd = *cmdlistptr;
+			     cmd->mii_reg != miim_end;
+			     cmd++) {
 				/* Only relocate non-NULL pointers */
-				if(cmd->funct)
+				if (cmd->funct)
 					cmd->funct += gd->reloc_off;
 
 				k++;
@@ -1119,16 +1235,15 @@
 	relocated = 1;
 }
 
-
 #if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) \
 	&& !defined(BITBANGMII)
 
-struct tsec_private * get_priv_for_phy(unsigned char phyaddr)
+struct tsec_private *get_priv_for_phy(unsigned char phyaddr)
 {
 	int i;
 
-	for(i=0;i<MAXCONTROLLERS;i++) {
-		if(privlist[i]->phyaddr == phyaddr)
+	for (i = 0; i < MAXCONTROLLERS; i++) {
+		if (privlist[i]->phyaddr == phyaddr)
 			return privlist[i];
 	}
 
@@ -1142,12 +1257,12 @@
  *  0 on success
  */
 static int tsec_miiphy_read(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short *value)
+			    unsigned char reg, unsigned short *value)
 {
 	unsigned short ret;
 	struct tsec_private *priv = get_priv_for_phy(addr);
 
-	if(NULL == priv) {
+	if (NULL == priv) {
 		printf("Can't read PHY at address %d\n", addr);
 		return -1;
 	}
@@ -1165,11 +1280,11 @@
  *  0 on success
  */
 static int tsec_miiphy_write(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short value)
+			     unsigned char reg, unsigned short value)
 {
 	struct tsec_private *priv = get_priv_for_phy(addr);
 
-	if(NULL == priv) {
+	if (NULL == priv) {
 		printf("Can't write PHY at address %d\n", addr);
 		return -1;
 	}
diff --git a/drivers/tsec.h b/drivers/tsec.h
index b55b299..4aa331c 100644
--- a/drivers/tsec.h
+++ b/drivers/tsec.h
@@ -27,7 +27,7 @@
 #define TSEC_SIZE	0x01000
 
 /* FIXME:  Should these be pushed back to 83xx and 85xx config files? */
-#if defined(CONFIG_MPC85xx)
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
     #define TSEC_BASE_ADDR	(CFG_IMMR + CFG_TSEC1_OFFSET)
 #elif defined(CONFIG_MPC83XX)
     #define TSEC_BASE_ADDR	(CFG_IMMRBAR + CFG_TSEC1_OFFSET)
@@ -133,6 +133,24 @@
 #define MIIM_GBIT_CON		0x09
 #define MIIM_GBIT_CON_ADVERT	0x0e00
 
+/* Entry for Vitesse VSC8244 regs starts here */
+/* Vitesse VSC8244 Auxiliary Control/Status Register */
+#define MIIM_VSC8244_AUX_CONSTAT        0x1c
+#define MIIM_VSC8244_AUXCONSTAT_INIT    0x0000
+#define MIIM_VSC8244_AUXCONSTAT_DUPLEX  0x0020
+#define MIIM_VSC8244_AUXCONSTAT_SPEED   0x0018
+#define MIIM_VSC8244_AUXCONSTAT_GBIT    0x0010
+#define MIIM_VSC8244_AUXCONSTAT_100     0x0008
+#define MIIM_CONTROL_INIT_LOOPBACK      0x4000
+
+/* Vitesse VSC8244 Extended PHY Control Register 1 */
+#define MIIM_VSC8244_EPHY_CON           0x17
+#define MIIM_VSC8244_EPHYCON_INIT       0x0006
+
+/* Vitesse VSC8244 Serial LED Control Register */
+#define MIIM_VSC8244_LED_CON            0x1b
+#define MIIM_VSC8244_LEDCON_INIT        0xF011
+
 /* 88E1011 PHY Status Register */
 #define MIIM_88E1011_PHY_STATUS         0x11
 #define MIIM_88E1011_PHYSTAT_SPEED      0xc000
@@ -142,6 +160,23 @@
 #define MIIM_88E1011_PHYSTAT_SPDDONE	0x0800
 #define MIIM_88E1011_PHYSTAT_LINK	0x0400
 
+#define MIIM_88E1011_PHY_SCR		0x10
+#define MIIM_88E1011_PHY_MDI_X_AUTO	0x0060
+
+/* 88E1111 PHY LED Control Register */
+#define MIIM_88E1111_PHY_LED_CONTROL   24
+#define MIIM_88E1111_PHY_LED_DIRECT    0x4100
+#define MIIM_88E1111_PHY_LED_COMBINE   0x411C
+
+/* 88E1145 Extended PHY Specific Control Register */
+#define MIIM_88E1145_PHY_EXT_CR 20
+#define MIIM_M88E1145_RGMII_RX_DELAY	0x0080
+#define MIIM_M88E1145_RGMII_TX_DELAY	0x0002
+
+#define MIIM_88E1145_PHY_PAGE   29
+#define MIIM_88E1145_PHY_CAL_OV 30
+
+
 /* DM9161 Control register values */
 #define MIIM_DM9161_CR_STOP	0x0400
 #define MIIM_DM9161_CR_RSTAN	0x1200
diff --git a/examples/Makefile b/examples/Makefile
index 8706ed4..423a79b 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -57,53 +57,66 @@
 LOAD_ADDR = 0x1000
 endif
 
+ifeq ($(ARCH),avr32)
+LOAD_ADDR = 0x00000000
+endif
+
 include $(TOPDIR)/config.mk
 
+ELF	= hello_world
 SREC	= hello_world.srec
-BIN	= hello_world.bin hello_world
+BIN	= hello_world.bin
 
 ifeq ($(CPU),mpc8xx)
+ELF	= test_burst
 SREC	= test_burst.srec
-BIN	= test_burst.bin test_burst
+BIN	= test_burst.bin
 endif
 
 ifeq ($(ARCH),i386)
-SREC   += 82559_eeprom.srec
-BIN    += 82559_eeprom.bin 82559_eeprom
+ELF	+= 82559_eeprom
+SREC	+= 82559_eeprom.srec
+BIN	+= 82559_eeprom.bin
 endif
 
 ifeq ($(ARCH),ppc)
-SREC   += sched.srec
-BIN    += sched.bin sched
+ELF	+= sched
+SREC	+= sched.srec
+BIN	+= sched.bin
 endif
 
 ifeq ($(ARCH),blackfin)
+ELF	+= smc91111_eeprom
 SREC	+= smc91111_eeprom.srec
-BIN 	+= smc91111_eeprom.bin smc91111_eeprom
+BIN 	+= smc91111_eeprom.bin
 endif
 
 # The following example is pretty 8xx specific...
 ifeq ($(CPU),mpc8xx)
-SREC   += timer.srec
-BIN    += timer.bin timer
+ELF	+= timer
+SREC	+= timer.srec
+BIN	+= timer.bin
 endif
 
 # The following example is 8260 specific...
 ifeq ($(CPU),mpc8260)
-SREC   += mem_to_mem_idma2intr.srec
-BIN    += mem_to_mem_idma2intr.bin mem_to_mem_idma2intr
+ELF	+= mem_to_mem_idma2intr
+SREC	+= mem_to_mem_idma2intr.srec
+BIN	+= mem_to_mem_idma2intr.bin
 endif
 
 # Demo for 52xx IRQs
 ifeq ($(CPU),mpc5xxx)
-SREC   += interrupt.srec
-BIN    += interrupt.bin interrupt
+ELF	+= interrupt
+SREC	+= interrupt.srec
+BIN	+= interrupt.bin
 endif
 
 # Utility for resetting i82559 EEPROM
 ifeq ($(BOARD),oxc)
-SREC   += eepro100_eeprom.srec
-BIN    += eepro100_eeprom.bin eepro100_eeprom
+ELF	+= eepro100_eeprom
+SREC	+= eepro100_eeprom.srec
+BIN	+= eepro100_eeprom.bin
 endif
 
 ifeq ($(BIG_ENDIAN),y)
@@ -126,6 +139,7 @@
 
 SRCS	:= $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(if $(LIBAOBJS),$(LIBAOBJS:.o=.S))
 OBJS	:= $(addprefix $(obj),$(COBJS))
+ELF	:= $(addprefix $(obj),$(ELF))
 BIN	:= $(addprefix $(obj),$(BIN))
 SREC	:= $(addprefix $(obj),$(SREC))
 
@@ -134,19 +148,23 @@
 
 CPPFLAGS += -I..
 
-all:	$(obj).depend $(OBJS) $(LIB) $(SREC) $(BIN)
+all:	$(obj).depend $(OBJS) $(LIB) $(SREC) $(BIN) $(ELF)
 
 #########################################################################
 $(LIB):	$(obj).depend $(LIBOBJS)
 		$(AR) $(ARFLAGS) $@ $(LIBOBJS)
 
+$(ELF):
 $(obj)%:	$(obj)%.o $(LIB)
 		$(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \
 			-o $@ -e $(notdir $(<:.o=)) $< $(LIB) \
 			-L$(gcclibdir) -lgcc
+
+$(SREC):
 $(obj)%.srec:	$(obj)%
 		$(OBJCOPY) -O srec $< $@ 2>/dev/null
 
+$(BIN):
 $(obj)%.bin:	$(obj)%
 		$(OBJCOPY) -O binary $< $@ 2>/dev/null
 
diff --git a/examples/stubs.c b/examples/stubs.c
index 1caa575..ffd314e 100644
--- a/examples/stubs.c
+++ b/examples/stubs.c
@@ -138,6 +138,19 @@
 "	P0 = [P0 + %1]\n"		\
 "	JUMP (P0)\n"			\
 	: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "P0");
+#elif defined(CONFIG_AVR32)
+/*
+ * r6 holds the pointer to the global_data. r8 is call clobbered.
+ */
+#define EXPORT_FUNC(x)					\
+	asm volatile(					\
+		"	.globl\t" #x "\n"		\
+		#x ":\n"				\
+		"	ld.w	r8, r6[%0]\n"		\
+		"	ld.w	pc, r8[%1]\n"		\
+		:					\
+		: "i"(offsetof(gd_t, jt)), "i"(XF_ ##x)	\
+		: "r8");
 #else
 #error stubs definition missing for this architecture
 #endif
diff --git a/include/ahci.h b/include/ahci.h
new file mode 100644
index 0000000..80701e2
--- /dev/null
+++ b/include/ahci.h
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ * Author: Jason Jin<Jason.jin@freescale.com>
+ *         Zhang Wei<wei.zhang@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#ifndef _AHCI_H_
+#define _AHCI_H_
+
+#define AHCI_PCI_BAR		0x24
+#define AHCI_MAX_SG		56 /* hardware max is 64K */
+#define AHCI_CMD_SLOT_SZ	32
+#define AHCI_RX_FIS_SZ		256
+#define AHCI_CMD_TBL_HDR	0x80
+#define AHCI_CMD_TBL_CDB	0x40
+#define AHCI_CMD_TBL_SZ		AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16)
+#define AHCI_PORT_PRIV_DMA_SZ	AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ	\
+				+ AHCI_RX_FIS_SZ
+#define AHCI_CMD_ATAPI		(1 << 5)
+#define AHCI_CMD_WRITE		(1 << 6)
+#define AHCI_CMD_PREFETCH	(1 << 7)
+#define AHCI_CMD_RESET		(1 << 8)
+#define AHCI_CMD_CLR_BUSY	(1 << 10)
+
+#define RX_FIS_D2H_REG		0x40	/* offset of D2H Register FIS data */
+
+/* Global controller registers */
+#define HOST_CAP		0x00 /* host capabilities */
+#define HOST_CTL		0x04 /* global host control */
+#define HOST_IRQ_STAT		0x08 /* interrupt status */
+#define HOST_PORTS_IMPL		0x0c /* bitmap of implemented ports */
+#define HOST_VERSION		0x10 /* AHCI spec. version compliancy */
+
+/* HOST_CTL bits */
+#define HOST_RESET		(1 << 0)  /* reset controller; self-clear */
+#define HOST_IRQ_EN		(1 << 1)  /* global IRQ enable */
+#define HOST_AHCI_EN		(1 << 31) /* AHCI enabled */
+
+/* Registers for each SATA port */
+#define PORT_LST_ADDR		0x00 /* command list DMA addr */
+#define PORT_LST_ADDR_HI	0x04 /* command list DMA addr hi */
+#define PORT_FIS_ADDR		0x08 /* FIS rx buf addr */
+#define PORT_FIS_ADDR_HI	0x0c /* FIS rx buf addr hi */
+#define PORT_IRQ_STAT		0x10 /* interrupt status */
+#define PORT_IRQ_MASK		0x14 /* interrupt enable/disable mask */
+#define PORT_CMD		0x18 /* port command */
+#define PORT_TFDATA		0x20 /* taskfile data */
+#define PORT_SIG		0x24 /* device TF signature */
+#define PORT_CMD_ISSUE		0x38 /* command issue */
+#define PORT_SCR		0x28 /* SATA phy register block */
+#define PORT_SCR_STAT		0x28 /* SATA phy register: SStatus */
+#define PORT_SCR_CTL		0x2c /* SATA phy register: SControl */
+#define PORT_SCR_ERR		0x30 /* SATA phy register: SError */
+#define PORT_SCR_ACT		0x34 /* SATA phy register: SActive */
+
+/* PORT_IRQ_{STAT,MASK} bits */
+#define PORT_IRQ_COLD_PRES	(1 << 31) /* cold presence detect */
+#define PORT_IRQ_TF_ERR		(1 << 30) /* task file error */
+#define PORT_IRQ_HBUS_ERR	(1 << 29) /* host bus fatal error */
+#define PORT_IRQ_HBUS_DATA_ERR	(1 << 28) /* host bus data error */
+#define PORT_IRQ_IF_ERR		(1 << 27) /* interface fatal error */
+#define PORT_IRQ_IF_NONFATAL	(1 << 26) /* interface non-fatal error */
+#define PORT_IRQ_OVERFLOW	(1 << 24) /* xfer exhausted available S/G */
+#define PORT_IRQ_BAD_PMP	(1 << 23) /* incorrect port multiplier */
+
+#define PORT_IRQ_PHYRDY		(1 << 22) /* PhyRdy changed */
+#define PORT_IRQ_DEV_ILCK	(1 << 7) /* device interlock */
+#define PORT_IRQ_CONNECT	(1 << 6) /* port connect change status */
+#define PORT_IRQ_SG_DONE	(1 << 5) /* descriptor processed */
+#define PORT_IRQ_UNK_FIS	(1 << 4) /* unknown FIS rx'd */
+#define PORT_IRQ_SDB_FIS	(1 << 3) /* Set Device Bits FIS rx'd */
+#define PORT_IRQ_DMAS_FIS	(1 << 2) /* DMA Setup FIS rx'd */
+#define PORT_IRQ_PIOS_FIS	(1 << 1) /* PIO Setup FIS rx'd */
+#define PORT_IRQ_D2H_REG_FIS	(1 << 0) /* D2H Register FIS rx'd */
+
+#define PORT_IRQ_FATAL		PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_ERR 	\
+				| PORT_IRQ_HBUS_DATA_ERR | PORT_IRQ_IF_ERR
+
+#define DEF_PORT_IRQ		PORT_IRQ_FATAL | PORT_IRQ_PHYRDY 	\
+				| PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE 	\
+				| PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS 	\
+				| PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS	\
+				| PORT_IRQ_D2H_REG_FIS
+
+/* PORT_CMD bits */
+#define PORT_CMD_ATAPI		(1 << 24) /* Device is ATAPI */
+#define PORT_CMD_LIST_ON	(1 << 15) /* cmd list DMA engine running */
+#define PORT_CMD_FIS_ON		(1 << 14) /* FIS DMA engine running */
+#define PORT_CMD_FIS_RX		(1 << 4) /* Enable FIS receive DMA engine */
+#define PORT_CMD_CLO		(1 << 3) /* Command list override */
+#define PORT_CMD_POWER_ON	(1 << 2) /* Power up device */
+#define PORT_CMD_SPIN_UP	(1 << 1) /* Spin up device */
+#define PORT_CMD_START		(1 << 0) /* Enable port DMA engine */
+
+#define PORT_CMD_ICC_ACTIVE	(0x1 << 28) /* Put i/f in active state */
+#define PORT_CMD_ICC_PARTIAL	(0x2 << 28) /* Put i/f in partial state */
+#define PORT_CMD_ICC_SLUMBER	(0x6 << 28) /* Put i/f in slumber state */
+
+#define AHCI_MAX_PORTS		32
+
+/* SETFEATURES stuff */
+#define SETFEATURES_XFER	0x03
+#define XFER_UDMA_7		0x47
+#define XFER_UDMA_6		0x46
+#define XFER_UDMA_5		0x45
+#define XFER_UDMA_4		0x44
+#define XFER_UDMA_3		0x43
+#define XFER_UDMA_2		0x42
+#define XFER_UDMA_1		0x41
+#define XFER_UDMA_0		0x40
+#define XFER_MW_DMA_2		0x22
+#define XFER_MW_DMA_1		0x21
+#define XFER_MW_DMA_0		0x20
+#define XFER_SW_DMA_2		0x12
+#define XFER_SW_DMA_1		0x11
+#define XFER_SW_DMA_0		0x10
+#define XFER_PIO_4		0x0C
+#define XFER_PIO_3		0x0B
+#define XFER_PIO_2		0x0A
+#define XFER_PIO_1		0x09
+#define XFER_PIO_0		0x08
+#define XFER_PIO_SLOW		0x00
+
+#define ATA_FLAG_SATA		(1 << 3)
+#define ATA_FLAG_NO_LEGACY	(1 << 4) /* no legacy mode check */
+#define ATA_FLAG_MMIO		(1 << 6) /* use MMIO, not PIO */
+#define ATA_FLAG_SATA_RESET	(1 << 7) /* (obsolete) use COMRESET */
+#define ATA_FLAG_PIO_DMA	(1 << 8) /* PIO cmds via DMA */
+#define ATA_FLAG_NO_ATAPI	(1 << 11) /* No ATAPI support */
+
+struct ahci_cmd_hdr {
+	u32	opts;
+	u32	status;
+	u32	tbl_addr;
+	u32	tbl_addr_hi;
+	u32	reserved[4];
+};
+
+struct ahci_sg {
+	u32	addr;
+	u32	addr_hi;
+	u32	reserved;
+	u32	flags_size;
+};
+
+struct ahci_ioports {
+	u32	cmd_addr;
+	u32	scr_addr;
+	u32	port_mmio;
+	struct ahci_cmd_hdr	*cmd_slot;
+	struct ahci_sg		*cmd_tbl_sg;
+	u32	cmd_tbl;
+	u32	rx_fis;
+};
+
+struct ahci_probe_ent {
+	pci_dev_t 	dev;
+	struct ahci_ioports	port[AHCI_MAX_PORTS];
+	u32	n_ports;
+	u32	hard_port_no;
+	u32	host_flags;
+	u32	host_set_flags;
+	u32	mmio_base;
+	u32     pio_mask;
+	u32	udma_mask;
+	u32	flags;
+	u32	cap;	/* cache of HOST_CAP register */
+	u32	port_map; /* cache of HOST_PORTS_IMPL reg */
+	u32	link_port_map; /*linkup port map*/
+};
+
+#endif
diff --git a/include/asm-avr32/addrspace.h b/include/asm-avr32/addrspace.h
new file mode 100644
index 0000000..b2ba1ee
--- /dev/null
+++ b/include/asm-avr32/addrspace.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_ADDRSPACE_H
+#define __ASM_AVR32_ADDRSPACE_H
+
+/* Memory segments when segmentation is enabled */
+#define P0SEG		0x00000000
+#define P1SEG		0x80000000
+#define P2SEG		0xa0000000
+#define P3SEG		0xc0000000
+#define P4SEG		0xe0000000
+
+/* Returns the privileged segment base of a given address */
+#define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
+
+/* Returns the physical address of a PnSEG (n=1,2) address */
+#define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
+
+/*
+ * Map an address to a certain privileged segment
+ */
+#define P1SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
+#define P2SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
+#define P3SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
+#define P4SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
+
+#endif /* __ASM_AVR32_ADDRSPACE_H */
diff --git a/include/asm-avr32/arch-at32ap7000/hmatrix2.h b/include/asm-avr32/arch-at32ap7000/hmatrix2.h
new file mode 100644
index 0000000..e6df4b7
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap7000/hmatrix2.h
@@ -0,0 +1,232 @@
+/*
+ * Register definition for the High-speed Bus Matrix
+ */
+#ifndef __ASM_AVR32_HMATRIX2_H__
+#define __ASM_AVR32_HMATRIX2_H__
+
+/* HMATRIX2 register offsets */
+#define HMATRIX2_MCFG0				0x0000
+#define HMATRIX2_MCFG1				0x0004
+#define HMATRIX2_MCFG2				0x0008
+#define HMATRIX2_MCFG3				0x000c
+#define HMATRIX2_MCFG4				0x0010
+#define HMATRIX2_MCFG5				0x0014
+#define HMATRIX2_MCFG6				0x0018
+#define HMATRIX2_MCFG7				0x001c
+#define HMATRIX2_MCFG8				0x0020
+#define HMATRIX2_MCFG9				0x0024
+#define HMATRIX2_MCFG10				0x0028
+#define HMATRIX2_MCFG11				0x002c
+#define HMATRIX2_MCFG12				0x0030
+#define HMATRIX2_MCFG13				0x0034
+#define HMATRIX2_MCFG14				0x0038
+#define HMATRIX2_MCFG15				0x003c
+#define HMATRIX2_SCFG0				0x0040
+#define HMATRIX2_SCFG1				0x0044
+#define HMATRIX2_SCFG2				0x0048
+#define HMATRIX2_SCFG3				0x004c
+#define HMATRIX2_SCFG4				0x0050
+#define HMATRIX2_SCFG5				0x0054
+#define HMATRIX2_SCFG6				0x0058
+#define HMATRIX2_SCFG7				0x005c
+#define HMATRIX2_SCFG8				0x0060
+#define HMATRIX2_SCFG9				0x0064
+#define HMATRIX2_SCFG10				0x0068
+#define HMATRIX2_SCFG11				0x006c
+#define HMATRIX2_SCFG12				0x0070
+#define HMATRIX2_SCFG13				0x0074
+#define HMATRIX2_SCFG14				0x0078
+#define HMATRIX2_SCFG15				0x007c
+#define HMATRIX2_PRAS0				0x0080
+#define HMATRIX2_PRBS0				0x0084
+#define HMATRIX2_PRAS1				0x0088
+#define HMATRIX2_PRBS1				0x008c
+#define HMATRIX2_PRAS2				0x0090
+#define HMATRIX2_PRBS2				0x0094
+#define HMATRIX2_PRAS3				0x0098
+#define HMATRIX2_PRBS3				0x009c
+#define HMATRIX2_PRAS4				0x00a0
+#define HMATRIX2_PRBS4				0x00a4
+#define HMATRIX2_PRAS5				0x00a8
+#define HMATRIX2_PRBS5				0x00ac
+#define HMATRIX2_PRAS6				0x00b0
+#define HMATRIX2_PRBS6				0x00b4
+#define HMATRIX2_PRAS7				0x00b8
+#define HMATRIX2_PRBS7				0x00bc
+#define HMATRIX2_PRAS8				0x00c0
+#define HMATRIX2_PRBS8				0x00c4
+#define HMATRIX2_PRAS9				0x00c8
+#define HMATRIX2_PRBS9				0x00cc
+#define HMATRIX2_PRAS10				0x00d0
+#define HMATRIX2_PRBS10				0x00d4
+#define HMATRIX2_PRAS11				0x00d8
+#define HMATRIX2_PRBS11				0x00dc
+#define HMATRIX2_PRAS12				0x00e0
+#define HMATRIX2_PRBS12				0x00e4
+#define HMATRIX2_PRAS13				0x00e8
+#define HMATRIX2_PRBS13				0x00ec
+#define HMATRIX2_PRAS14				0x00f0
+#define HMATRIX2_PRBS14				0x00f4
+#define HMATRIX2_PRAS15				0x00f8
+#define HMATRIX2_PRBS15				0x00fc
+#define HMATRIX2_MRCR				0x0100
+#define HMATRIX2_SFR0				0x0110
+#define HMATRIX2_SFR1				0x0114
+#define HMATRIX2_SFR2				0x0118
+#define HMATRIX2_SFR3				0x011c
+#define HMATRIX2_SFR4				0x0120
+#define HMATRIX2_SFR5				0x0124
+#define HMATRIX2_SFR6				0x0128
+#define HMATRIX2_SFR7				0x012c
+#define HMATRIX2_SFR8				0x0130
+#define HMATRIX2_SFR9				0x0134
+#define HMATRIX2_SFR10				0x0138
+#define HMATRIX2_SFR11				0x013c
+#define HMATRIX2_SFR12				0x0140
+#define HMATRIX2_SFR13				0x0144
+#define HMATRIX2_SFR14				0x0148
+#define HMATRIX2_SFR15				0x014c
+#define HMATRIX2_VERSION			0x01fc
+
+/* Bitfields in MCFG0 */
+#define HMATRIX2_ULBT_OFFSET			0
+#define HMATRIX2_ULBT_SIZE			3
+
+/* Bitfields in SCFG0 */
+#define HMATRIX2_SLOT_CYCLE_OFFSET		0
+#define HMATRIX2_SLOT_CYCLE_SIZE		8
+#define HMATRIX2_DEFMSTR_TYPE_OFFSET		16
+#define HMATRIX2_DEFMSTR_TYPE_SIZE		2
+#define HMATRIX2_FIXED_DEFMSTR_OFFSET		18
+#define HMATRIX2_FIXED_DEFMSTR_SIZE		4
+#define HMATRIX2_ARBT_OFFSET			24
+#define HMATRIX2_ARBT_SIZE			2
+
+/* Bitfields in PRAS0 */
+#define HMATRIX2_M0PR_OFFSET			0
+#define HMATRIX2_M0PR_SIZE			4
+#define HMATRIX2_M1PR_OFFSET			4
+#define HMATRIX2_M1PR_SIZE			4
+#define HMATRIX2_M2PR_OFFSET			8
+#define HMATRIX2_M2PR_SIZE			4
+#define HMATRIX2_M3PR_OFFSET			12
+#define HMATRIX2_M3PR_SIZE			4
+#define HMATRIX2_M4PR_OFFSET			16
+#define HMATRIX2_M4PR_SIZE			4
+#define HMATRIX2_M5PR_OFFSET			20
+#define HMATRIX2_M5PR_SIZE			4
+#define HMATRIX2_M6PR_OFFSET			24
+#define HMATRIX2_M6PR_SIZE			4
+#define HMATRIX2_M7PR_OFFSET			28
+#define HMATRIX2_M7PR_SIZE			4
+
+/* Bitfields in PRBS0 */
+#define HMATRIX2_M8PR_OFFSET			0
+#define HMATRIX2_M8PR_SIZE			4
+#define HMATRIX2_M9PR_OFFSET			4
+#define HMATRIX2_M9PR_SIZE			4
+#define HMATRIX2_M10PR_OFFSET			8
+#define HMATRIX2_M10PR_SIZE			4
+#define HMATRIX2_M11PR_OFFSET			12
+#define HMATRIX2_M11PR_SIZE			4
+#define HMATRIX2_M12PR_OFFSET			16
+#define HMATRIX2_M12PR_SIZE			4
+#define HMATRIX2_M13PR_OFFSET			20
+#define HMATRIX2_M13PR_SIZE			4
+#define HMATRIX2_M14PR_OFFSET			24
+#define HMATRIX2_M14PR_SIZE			4
+#define HMATRIX2_M15PR_OFFSET			28
+#define HMATRIX2_M15PR_SIZE			4
+
+/* Bitfields in MRCR */
+#define HMATRIX2_RBC0_OFFSET			0
+#define HMATRIX2_RBC0_SIZE			1
+#define HMATRIX2_RBC1_OFFSET			1
+#define HMATRIX2_RBC1_SIZE			1
+#define HMATRIX2_RBC2_OFFSET			2
+#define HMATRIX2_RBC2_SIZE			1
+#define HMATRIX2_RBC3_OFFSET			3
+#define HMATRIX2_RBC3_SIZE			1
+#define HMATRIX2_RBC4_OFFSET			4
+#define HMATRIX2_RBC4_SIZE			1
+#define HMATRIX2_RBC5_OFFSET			5
+#define HMATRIX2_RBC5_SIZE			1
+#define HMATRIX2_RBC6_OFFSET			6
+#define HMATRIX2_RBC6_SIZE			1
+#define HMATRIX2_RBC7_OFFSET			7
+#define HMATRIX2_RBC7_SIZE			1
+#define HMATRIX2_RBC8_OFFSET			8
+#define HMATRIX2_RBC8_SIZE			1
+#define HMATRIX2_RBC9_OFFSET			9
+#define HMATRIX2_RBC9_SIZE			1
+#define HMATRIX2_RBC10_OFFSET			10
+#define HMATRIX2_RBC10_SIZE			1
+#define HMATRIX2_RBC11_OFFSET			11
+#define HMATRIX2_RBC11_SIZE			1
+#define HMATRIX2_RBC12_OFFSET			12
+#define HMATRIX2_RBC12_SIZE			1
+#define HMATRIX2_RBC13_OFFSET			13
+#define HMATRIX2_RBC13_SIZE			1
+#define HMATRIX2_RBC14_OFFSET			14
+#define HMATRIX2_RBC14_SIZE			1
+#define HMATRIX2_RBC15_OFFSET			15
+#define HMATRIX2_RBC15_SIZE			1
+
+/* Bitfields in SFR0 */
+#define HMATRIX2_SFR_OFFSET			0
+#define HMATRIX2_SFR_SIZE			32
+
+/* Bitfields in SFR4 */
+#define HMATRIX2_CS1A_OFFSET			1
+#define HMATRIX2_CS1A_SIZE			1
+#define HMATRIX2_CS3A_OFFSET			3
+#define HMATRIX2_CS3A_SIZE			1
+#define HMATRIX2_CS4A_OFFSET			4
+#define HMATRIX2_CS4A_SIZE			1
+#define HMATRIX2_CS5A_OFFSET			5
+#define HMATRIX2_CS5A_SIZE			1
+#define HMATRIX2_DBPUC_OFFSET			8
+#define HMATRIX2_DBPUC_SIZE			1
+
+/* Bitfields in VERSION */
+#define HMATRIX2_VERSION_OFFSET			0
+#define HMATRIX2_VERSION_SIZE			12
+#define HMATRIX2_MFN_OFFSET			16
+#define HMATRIX2_MFN_SIZE			3
+
+/* Constants for ULBT */
+#define HMATRIX2_ULBT_INFINITE			0
+#define HMATRIX2_ULBT_SINGLE			1
+#define HMATRIX2_ULBT_FOUR_BEAT			2
+#define HMATRIX2_ULBT_SIXTEEN_BEAT		4
+
+/* Constants for DEFMSTR_TYPE */
+#define HMATRIX2_DEFMSTR_TYPE_NO_DEFAULT	0
+#define HMATRIX2_DEFMSTR_TYPE_LAST_DEFAULT	1
+#define HMATRIX2_DEFMSTR_TYPE_FIXED_DEFAULT	2
+
+/* Constants for ARBT */
+#define HMATRIX2_ARBT_ROUND_ROBIN		0
+#define HMATRIX2_ARBT_FIXED_PRIORITY		1
+
+/* Bit manipulation macros */
+#define HMATRIX2_BIT(name)					\
+	(1 << HMATRIX2_##name##_OFFSET)
+#define HMATRIX2_BF(name,value)					\
+	(((value) & ((1 << HMATRIX2_##name##_SIZE) - 1))	\
+	 << HMATRIX2_##name##_OFFSET)
+#define HMATRIX2_BFEXT(name,value)				\
+	(((value) >> HMATRIX2_##name##_OFFSET)			\
+	 & ((1 << HMATRIX2_##name##_SIZE) - 1))
+#define HMATRIX2_BFINS(name,value,old)				\
+	(((old) & ~(((1 << HMATRIX2_##name##_SIZE) - 1)		\
+		    << HMATRIX2_##name##_OFFSET))		\
+	 | HMATRIX2_BF(name,value))
+
+/* Register access macros */
+#define hmatrix2_readl(port,reg)				\
+	readl((port)->regs + HMATRIX2_##reg)
+#define hmatrix2_writel(port,reg,value)				\
+	writel((value), (port)->regs + HMATRIX2_##reg)
+
+#endif /* __ASM_AVR32_HMATRIX2_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/memory-map.h b/include/asm-avr32/arch-at32ap7000/memory-map.h
new file mode 100644
index 0000000..8ffe851
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap7000/memory-map.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_PART_MEMORY_MAP_H__
+#define __ASM_AVR32_PART_MEMORY_MAP_H__
+
+#define AUDIOC_BASE                             0xFFF02800
+#define DAC_BASE                                0xFFF02000
+#define DMAC_BASE                               0xFF200000
+#define ECC_BASE                                0xFFF03C00
+#define HISI_BASE                               0xFFF02C00
+#define HMATRIX_BASE                            0xFFF00800
+#define HSDRAMC_BASE                            0xFFF03800
+#define HSMC_BASE                               0xFFF03400
+#define LCDC_BASE                               0xFF000000
+#define MACB0_BASE                              0xFFF01800
+#define MACB1_BASE                              0xFFF01C00
+#define MMCI_BASE                               0xFFF02400
+#define PIOA_BASE                               0xFFE02800
+#define PIOB_BASE                               0xFFE02C00
+#define PIOC_BASE                               0xFFE03000
+#define PIOD_BASE                               0xFFE03400
+#define PIOE_BASE                               0xFFE03800
+#define PSIF_BASE                               0xFFE03C00
+#define PWM_BASE                                0xFFF01400
+#define SM_BASE                                 0xFFF00000
+#define INTC_BASE				0XFFF00400
+#define SPI0_BASE                               0xFFE00000
+#define SPI1_BASE                               0xFFE00400
+#define SSC0_BASE                               0xFFE01C00
+#define SSC1_BASE                               0xFFE02000
+#define SSC2_BASE                               0xFFE02400
+#define TIMER0_BASE                             0xFFF00C00
+#define TIMER1_BASE                             0xFFF01000
+#define TWI_BASE                                0xFFE00800
+#define USART0_BASE                             0xFFE00C00
+#define USART1_BASE                             0xFFE01000
+#define USART2_BASE                             0xFFE01400
+#define USART3_BASE                             0xFFE01800
+#define USB_FIFO                                0xFF300000
+#define USB_BASE                                0xFFF03000
+
+#endif /* __ASM_AVR32_PART_MEMORY_MAP_H__ */
diff --git a/include/asm-avr32/arch-at32ap7000/platform.h b/include/asm-avr32/arch-at32ap7000/platform.h
new file mode 100644
index 0000000..7590501
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap7000/platform.h
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _ASM_AVR32_ARCH_PM_H
+#define _ASM_AVR32_ARCH_PM_H
+
+#include <config.h>
+
+enum clock_domain_id {
+	CLOCK_CPU,
+	CLOCK_HSB,
+	CLOCK_PBA,
+	CLOCK_PBB,
+	NR_CLOCK_DOMAINS,
+};
+
+enum resource_type {
+	RESOURCE_GPIO,
+	RESOURCE_CLOCK,
+};
+
+enum gpio_func {
+	GPIO_FUNC_GPIO,
+	GPIO_FUNC_A,
+	GPIO_FUNC_B,
+};
+
+enum device_id {
+	DEVICE_HEBI,
+	DEVICE_PBA_BRIDGE,
+	DEVICE_PBB_BRIDGE,
+	DEVICE_HRAMC,
+	/* GPIO controllers must be kept together */
+	DEVICE_PIOA,
+	DEVICE_PIOB,
+	DEVICE_PIOC,
+	DEVICE_PIOD,
+	DEVICE_PIOE,
+	DEVICE_SM,
+	DEVICE_INTC,
+	DEVICE_HMATRIX,
+#if defined(CFG_HPDC)
+	DEVICE_HPDC,
+#endif
+#if defined(CFG_MACB0)
+	DEVICE_MACB0,
+#endif
+#if defined(CFG_MACB1)
+	DEVICE_MACB1,
+#endif
+#if defined(CFG_LCDC)
+	DEVICE_LCDC,
+#endif
+#if defined(CFG_USART0)
+	DEVICE_USART0,
+#endif
+#if defined(CFG_USART1)
+	DEVICE_USART1,
+#endif
+#if defined(CFG_USART2)
+	DEVICE_USART2,
+#endif
+#if defined(CFG_USART3)
+	DEVICE_USART3,
+#endif
+#if defined(CFG_MMCI)
+	DEVICE_MMCI,
+#endif
+#if defined(CFG_DMAC)
+	DEVICE_DMAC,
+#endif
+	NR_DEVICES,
+	NO_DEVICE = -1,
+};
+
+struct resource {
+	enum resource_type type;
+	union {
+		struct {
+			unsigned long base;
+		} iomem;
+		struct {
+			unsigned char nr_pins;
+			enum device_id gpio_dev;
+			enum gpio_func func;
+			unsigned short start;
+		} gpio;
+		struct {
+			enum clock_domain_id id;
+			unsigned char index;
+		} clock;
+	} u;
+};
+
+struct device {
+	void *regs;
+	unsigned int nr_resources;
+	const struct resource *resource;
+};
+
+struct clock_domain {
+	unsigned short reg;
+	enum clock_domain_id id;
+	enum device_id bridge;
+};
+
+extern const struct device chip_device[NR_DEVICES];
+extern const struct clock_domain chip_clock[NR_CLOCK_DOMAINS];
+
+/**
+ * Set up PIO, clock management and I/O memory for a device.
+ */
+const struct device *get_device(enum device_id devid);
+void put_device(const struct device *dev);
+
+int gpio_set_func(enum device_id gpio_devid, unsigned int start,
+		  unsigned int nr_pins, enum gpio_func func);
+void gpio_free(enum device_id gpio_devid, unsigned int start,
+	       unsigned int nr_pins);
+
+void pm_init(void);
+int pm_enable_clock(enum clock_domain_id id, unsigned int index);
+void pm_disable_clock(enum clock_domain_id id, unsigned int index);
+unsigned long pm_get_clock_freq(enum clock_domain_id domain);
+
+void cpu_enable_sdram(void);
+
+#endif /* _ASM_AVR32_ARCH_PM_H */
diff --git a/include/asm-avr32/bitops.h b/include/asm-avr32/bitops.h
new file mode 100644
index 0000000..f15fd46
--- /dev/null
+++ b/include/asm-avr32/bitops.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_BITOPS_H
+#define __ASM_AVR32_BITOPS_H
+
+#endif /* __ASM_AVR32_BITOPS_H */
diff --git a/include/asm-avr32/byteorder.h b/include/asm-avr32/byteorder.h
new file mode 100644
index 0000000..2fe867e
--- /dev/null
+++ b/include/asm-avr32/byteorder.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_BYTEORDER_H
+#define __ASM_AVR32_BYTEORDER_H
+
+#include <asm/types.h>
+
+#define __arch__swab32(x) __builtin_bswap_32(x)
+#define __arch__swab16(x) __builtin_bswap_16(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* __ASM_AVR32_BYTEORDER_H */
diff --git a/include/asm-avr32/cacheflush.h b/include/asm-avr32/cacheflush.h
new file mode 100644
index 0000000..929f68e
--- /dev/null
+++ b/include/asm-avr32/cacheflush.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_CACHEFLUSH_H
+#define __ASM_AVR32_CACHEFLUSH_H
+
+/*
+ * Invalidate any cacheline containing virtual address vaddr without
+ * writing anything back to memory.
+ *
+ * Note that this function may corrupt unrelated data structures when
+ * applied on buffers that are not cacheline aligned in both ends.
+ */
+static inline void dcache_invalidate_line(volatile void *vaddr)
+{
+	asm volatile("cache %0[0], 0x0b" : : "r"(vaddr) : "memory");
+}
+
+/*
+ * Make sure any cacheline containing virtual address vaddr is written
+ * to memory.
+ */
+static inline void dcache_clean_line(volatile void *vaddr)
+{
+	asm volatile("cache %0[0], 0x0c" : : "r"(vaddr) : "memory");
+}
+
+/*
+ * Make sure any cacheline containing virtual address vaddr is written
+ * to memory and then invalidate it.
+ */
+static inline void dcache_flush_line(volatile void *vaddr)
+{
+	asm volatile("cache %0[0], 0x0d" : : "r"(vaddr) : "memory");
+}
+
+/*
+ * Invalidate any instruction cacheline containing virtual address
+ * vaddr.
+ */
+static inline void icache_invalidate_line(volatile void *vaddr)
+{
+	asm volatile("cache %0[0], 0x01" : : "r"(vaddr) : "memory");
+}
+
+/*
+ * Applies the above functions on all lines that are touched by the
+ * specified virtual address range.
+ */
+void dcache_invalidate_range(volatile void *start, size_t len);
+void dcache_clean_range(volatile void *start, size_t len);
+void dcache_flush_range(volatile void *start, size_t len);
+void icache_invalidate_range(volatile void *start, size_t len);
+
+static inline void dcache_flush_unlocked(void)
+{
+	asm volatile("cache %0[5], 0x08" : : "r"(0) : "memory");
+}
+
+/*
+ * Make sure any pending writes are completed before continuing.
+ */
+#define sync_write_buffer() asm volatile("sync 0" : : : "memory")
+
+#endif /* __ASM_AVR32_CACHEFLUSH_H */
diff --git a/include/asm-avr32/div64.h b/include/asm-avr32/div64.h
new file mode 100644
index 0000000..2e0ba83
--- /dev/null
+++ b/include/asm-avr32/div64.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_GENERIC_DIV64_H
+#define _ASM_GENERIC_DIV64_H
+/*
+ * Copyright (C) 2003 Bernardo Innocenti <bernie@develer.com>
+ * Based on former asm-ppc/div64.h and asm-m68knommu/div64.h
+ *
+ * The semantics of do_div() are:
+ *
+ * uint32_t do_div(uint64_t *n, uint32_t base)
+ * {
+ * 	uint32_t remainder = *n % base;
+ * 	*n = *n / base;
+ * 	return remainder;
+ * }
+ *
+ * NOTE: macro parameter n is evaluated multiple times,
+ *       beware of side effects!
+ */
+
+#include <linux/types.h>
+
+extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
+
+/* The unnecessary pointer compare is there
+ * to check for type safety (n must be 64bit)
+ */
+# define do_div(n,base) ({				\
+	uint32_t __base = (base);			\
+	uint32_t __rem;					\
+	(void)(((typeof((n)) *)0) == ((uint64_t *)0));	\
+	if (((n) >> 32) == 0) {			\
+		__rem = (uint32_t)(n) % __base;		\
+		(n) = (uint32_t)(n) / __base;		\
+	} else 						\
+		__rem = __div64_32(&(n), __base);	\
+	__rem;						\
+ })
+
+#endif /* _ASM_GENERIC_DIV64_H */
diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h
new file mode 100644
index 0000000..3b46fa3
--- /dev/null
+++ b/include/asm-avr32/dma-mapping.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_DMA_MAPPING_H
+#define __ASM_AVR32_DMA_MAPPING_H
+
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+
+enum dma_data_direction {
+	DMA_BIDIRECTIONAL	= 0,
+	DMA_TO_DEVICE		= 1,
+	DMA_FROM_DEVICE		= 2,
+};
+extern void *dma_alloc_coherent(size_t len, unsigned long *handle);
+
+static inline unsigned long dma_map_single(volatile void *vaddr, size_t len,
+					   enum dma_data_direction dir)
+{
+	extern void __bad_dma_data_direction(void);
+
+	switch (dir) {
+	case DMA_BIDIRECTIONAL:
+		dcache_flush_range(vaddr, len);
+		break;
+	case DMA_TO_DEVICE:
+		dcache_clean_range(vaddr, len);
+		break;
+	case DMA_FROM_DEVICE:
+		dcache_invalidate_range(vaddr, len);
+		break;
+	default:
+		/* This will cause a linker error */
+		__bad_dma_data_direction();
+	}
+
+	return virt_to_phys(vaddr);
+}
+
+static inline void dma_unmap_single(volatile void *vaddr, size_t len,
+				    unsigned long paddr)
+{
+
+}
+
+#endif /* __ASM_AVR32_DMA_MAPPING_H */
diff --git a/include/asm-avr32/errno.h b/include/asm-avr32/errno.h
new file mode 100644
index 0000000..ea3506f
--- /dev/null
+++ b/include/asm-avr32/errno.h
@@ -0,0 +1,132 @@
+#ifndef _ASM_AVR32_ERRNO_H
+#define _ASM_AVR32_ERRNO_H
+
+#define	EPERM		 1	/* Operation not permitted */
+#define	ENOENT		 2	/* No such file or directory */
+#define	ESRCH		 3	/* No such process */
+#define	EINTR		 4	/* Interrupted system call */
+#define	EIO		 5	/* I/O error */
+#define	ENXIO		 6	/* No such device or address */
+#define	E2BIG		 7	/* Argument list too long */
+#define	ENOEXEC		 8	/* Exec format error */
+#define	EBADF		 9	/* Bad file number */
+#define	ECHILD		10	/* No child processes */
+#define	EAGAIN		11	/* Try again */
+#define	ENOMEM		12	/* Out of memory */
+#define	EACCES		13	/* Permission denied */
+#define	EFAULT		14	/* Bad address */
+#define	ENOTBLK		15	/* Block device required */
+#define	EBUSY		16	/* Device or resource busy */
+#define	EEXIST		17	/* File exists */
+#define	EXDEV		18	/* Cross-device link */
+#define	ENODEV		19	/* No such device */
+#define	ENOTDIR		20	/* Not a directory */
+#define	EISDIR		21	/* Is a directory */
+#define	EINVAL		22	/* Invalid argument */
+#define	ENFILE		23	/* File table overflow */
+#define	EMFILE		24	/* Too many open files */
+#define	ENOTTY		25	/* Not a typewriter */
+#define	ETXTBSY		26	/* Text file busy */
+#define	EFBIG		27	/* File too large */
+#define	ENOSPC		28	/* No space left on device */
+#define	ESPIPE		29	/* Illegal seek */
+#define	EROFS		30	/* Read-only file system */
+#define	EMLINK		31	/* Too many links */
+#define	EPIPE		32	/* Broken pipe */
+#define	EDOM		33	/* Math argument out of domain of func */
+#define	ERANGE		34	/* Math result not representable */
+#define	EDEADLK		35	/* Resource deadlock would occur */
+#define	ENAMETOOLONG	36	/* File name too long */
+#define	ENOLCK		37	/* No record locks available */
+#define	ENOSYS		38	/* Function not implemented */
+#define	ENOTEMPTY	39	/* Directory not empty */
+#define	ELOOP		40	/* Too many symbolic links encountered */
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	ENOMSG		42	/* No message of desired type */
+#define	EIDRM		43	/* Identifier removed */
+#define	ECHRNG		44	/* Channel number out of range */
+#define	EL2NSYNC	45	/* Level 2 not synchronized */
+#define	EL3HLT		46	/* Level 3 halted */
+#define	EL3RST		47	/* Level 3 reset */
+#define	ELNRNG		48	/* Link number out of range */
+#define	EUNATCH		49	/* Protocol driver not attached */
+#define	ENOCSI		50	/* No CSI structure available */
+#define	EL2HLT		51	/* Level 2 halted */
+#define	EBADE		52	/* Invalid exchange */
+#define	EBADR		53	/* Invalid request descriptor */
+#define	EXFULL		54	/* Exchange full */
+#define	ENOANO		55	/* No anode */
+#define	EBADRQC		56	/* Invalid request code */
+#define	EBADSLT		57	/* Invalid slot */
+
+#define	EDEADLOCK	EDEADLK
+
+#define	EBFONT		59	/* Bad font file format */
+#define	ENOSTR		60	/* Device not a stream */
+#define	ENODATA		61	/* No data available */
+#define	ETIME		62	/* Timer expired */
+#define	ENOSR		63	/* Out of streams resources */
+#define	ENONET		64	/* Machine is not on the network */
+#define	ENOPKG		65	/* Package not installed */
+#define	EREMOTE		66	/* Object is remote */
+#define	ENOLINK		67	/* Link has been severed */
+#define	EADV		68	/* Advertise error */
+#define	ESRMNT		69	/* Srmount error */
+#define	ECOMM		70	/* Communication error on send */
+#define	EPROTO		71	/* Protocol error */
+#define	EMULTIHOP	72	/* Multihop attempted */
+#define	EDOTDOT		73	/* RFS specific error */
+#define	EBADMSG		74	/* Not a data message */
+#define	EOVERFLOW	75	/* Value too large for defined data type */
+#define	ENOTUNIQ	76	/* Name not unique on network */
+#define	EBADFD		77	/* File descriptor in bad state */
+#define	EREMCHG		78	/* Remote address changed */
+#define	ELIBACC		79	/* Can not access a needed shared library */
+#define	ELIBBAD		80	/* Accessing a corrupted shared library */
+#define	ELIBSCN		81	/* .lib section in a.out corrupted */
+#define	ELIBMAX		82	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	83	/* Cannot exec a shared library directly */
+#define	EILSEQ		84	/* Illegal byte sequence */
+#define	ERESTART	85	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	86	/* Streams pipe error */
+#define	EUSERS		87	/* Too many users */
+#define	ENOTSOCK	88	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	89	/* Destination address required */
+#define	EMSGSIZE	90	/* Message too long */
+#define	EPROTOTYPE	91	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	92	/* Protocol not available */
+#define	EPROTONOSUPPORT	93	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	94	/* Socket type not supported */
+#define	EOPNOTSUPP	95	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	96	/* Protocol family not supported */
+#define	EAFNOSUPPORT	97	/* Address family not supported by protocol */
+#define	EADDRINUSE	98	/* Address already in use */
+#define	EADDRNOTAVAIL	99	/* Cannot assign requested address */
+#define	ENETDOWN	100	/* Network is down */
+#define	ENETUNREACH	101	/* Network is unreachable */
+#define	ENETRESET	102	/* Network dropped connection because of reset */
+#define	ECONNABORTED	103	/* Software caused connection abort */
+#define	ECONNRESET	104	/* Connection reset by peer */
+#define	ENOBUFS		105	/* No buffer space available */
+#define	EISCONN		106	/* Transport endpoint is already connected */
+#define	ENOTCONN	107	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	108	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	109	/* Too many references: cannot splice */
+#define	ETIMEDOUT	110	/* Connection timed out */
+#define	ECONNREFUSED	111	/* Connection refused */
+#define	EHOSTDOWN	112	/* Host is down */
+#define	EHOSTUNREACH	113	/* No route to host */
+#define	EALREADY	114	/* Operation already in progress */
+#define	EINPROGRESS	115	/* Operation now in progress */
+#define	ESTALE		116	/* Stale NFS file handle */
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+#define	EDQUOT		122	/* Quota exceeded */
+
+#define	ENOMEDIUM	123	/* No medium found */
+#define	EMEDIUMTYPE	124	/* Wrong medium type */
+
+#endif /* _ASM_AVR32_ERRNO_H */
diff --git a/include/asm-avr32/global_data.h b/include/asm-avr32/global_data.h
new file mode 100644
index 0000000..01d836c
--- /dev/null
+++ b/include/asm-avr32/global_data.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_GLOBAL_DATA_H__
+#define __ASM_GLOBAL_DATA_H__
+
+/*
+ * The following data structure is placed in some memory wich is
+ * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
+ * some locked parts of the data cache) to allow for a minimum set of
+ * global variables during system initialization (until we have set
+ * up the memory controller so that we can use RAM).
+ *
+ * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t)
+ */
+
+typedef	struct	global_data {
+	bd_t		*bd;
+	unsigned long	flags;
+	const struct device	*console_uart;
+	const struct device	*sm;
+	unsigned long	baudrate;
+	unsigned long	sdram_size;
+	unsigned long	have_console;	/* serial_init() was called */
+	unsigned long	reloc_off;	/* Relocation Offset */
+	unsigned long	env_addr;	/* Address of env struct */
+	unsigned long	env_valid;	/* Checksum of env valid? */
+	unsigned long	cpu_hz;		/* cpu core clock frequency */
+	void		**jt;		/* jump table */
+} gd_t;
+
+/*
+ * Global Data Flags
+ */
+#define GD_FLG_RELOC	0x00001		/* Code was relocated to RAM	 */
+#define GD_FLG_DEVINIT	0x00002		/* Devices have been initialized */
+#define GD_FLG_SILENT	0x00004		/* Silent mode			 */
+
+#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm("r5")
+
+#endif /* __ASM_GLOBAL_DATA_H__ */
diff --git a/include/asm-avr32/initcalls.h b/include/asm-avr32/initcalls.h
new file mode 100644
index 0000000..7ba25cd
--- /dev/null
+++ b/include/asm-avr32/initcalls.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2005, 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_INITCALLS_H__
+#define __ASM_AVR32_INITCALLS_H__
+
+#include <config.h>
+
+extern int cpu_init(void);
+extern int timer_init(void);
+extern void board_init_memories(void);
+extern void board_init_pio(void);
+extern void board_init_info(void);
+
+#endif /* __ASM_AVR32_INITCALLS_H__ */
diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
new file mode 100644
index 0000000..e86c456
--- /dev/null
+++ b/include/asm-avr32/io.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_IO_H
+#define __ASM_AVR32_IO_H
+
+#ifdef __KERNEL__
+
+/*
+ * Generic IO read/write.  These perform native-endian accesses.  Note
+ * that some architectures will want to re-define __raw_{read,write}w.
+ */
+extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
+extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
+extern void __raw_writesl(unsigned int addr, const void *data, int longlen);
+
+extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
+extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
+extern void __raw_readsl(unsigned int addr, void *data, int longlen);
+
+#define __raw_writeb(v,a)       (*(volatile unsigned char  *)(a) = (v))
+#define __raw_writew(v,a)       (*(volatile unsigned short *)(a) = (v))
+#define __raw_writel(v,a)       (*(volatile unsigned int   *)(a) = (v))
+
+#define __raw_readb(a)          (*(volatile unsigned char  *)(a))
+#define __raw_readw(a)          (*(volatile unsigned short *)(a))
+#define __raw_readl(a)          (*(volatile unsigned int   *)(a))
+
+/* As long as I/O is only performed in P4 (or possibly P3), we're safe */
+#define writeb(v,a)		__raw_writeb(v,a)
+#define writew(v,a)		__raw_writew(v,a)
+#define writel(v,a)		__raw_writel(v,a)
+
+#define readb(a)		__raw_readb(a)
+#define readw(a)		__raw_readw(a)
+#define readl(a)		__raw_readl(a)
+
+/*
+ * Bad read/write accesses...
+ */
+extern void __readwrite_bug(const char *fn);
+
+#define IO_SPACE_LIMIT	0xffffffff
+
+/*
+ * All I/O is memory mapped, so these macros doesn't make very much sense
+ */
+#define outb(v,p)		__raw_writeb(v, p)
+#define outw(v,p)		__raw_writew(cpu_to_le16(v),p)
+#define outl(v,p)		__raw_writel(cpu_to_le32(v),p)
+
+#define inb(p)	({ unsigned int __v = __raw_readb(p); __v; })
+#define inw(p)	({ unsigned int __v = __le16_to_cpu(__raw_readw(p)); __v; })
+#define inl(p)	({ unsigned int __v = __le32_to_cpu(__raw_readl(p)); __v; })
+
+#include <asm/addrspace.h>
+
+/* virt_to_phys will only work when address is in P1 or P2 */
+static __inline__ unsigned long virt_to_phys(volatile void *address)
+{
+	return PHYSADDR(address);
+}
+
+static __inline__ void * phys_to_virt(unsigned long address)
+{
+	return (void *)P1SEGADDR(address);
+}
+
+#define cached(addr) ((void *)P1SEGADDR(addr))
+#define uncached(addr) ((void *)P2SEGADDR(addr))
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_AVR32_IO_H */
diff --git a/include/asm-avr32/posix_types.h b/include/asm-avr32/posix_types.h
new file mode 100644
index 0000000..edf1bc1
--- /dev/null
+++ b/include/asm-avr32/posix_types.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_POSIX_TYPES_H
+#define __ASM_AVR32_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_dev_t;
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef  __FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef  __FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef  __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef  __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* __ASM_AVR32_POSIX_TYPES_H */
diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h
new file mode 100644
index 0000000..cc59dfa
--- /dev/null
+++ b/include/asm-avr32/processor.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_PROCESSOR_H
+#define __ASM_AVR32_PROCESSOR_H
+
+#ifndef __ASSEMBLY__
+
+#define current_text_addr() ({ void *pc; __asm__("mov %0,pc" : "=r"(pc)); pc; })
+
+struct avr32_cpuinfo {
+	unsigned long loops_per_jiffy;
+};
+
+extern struct avr32_cpuinfo boot_cpu_data;
+
+#ifdef CONFIG_SMP
+extern struct avr32_cpuinfo cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#else
+#define cpu_data (&boot_cpu_data)
+#define current_cpu_data boot_cpu_data
+#endif
+
+/* TODO: Make configurable (2GB will serve as a reasonable default) */
+#define TASK_SIZE	0x80000000
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 3)
+
+#define cpu_relax()		barrier()
+#define cpu_sync_pipeline()	asm volatile("sub pc, -2" : : : "memory")
+
+/* This struct contains the CPU context as stored by switch_to() */
+struct thread_struct {
+	unsigned long pc;
+	unsigned long ksp;	/* Kernel stack pointer */
+	unsigned long r7;
+	unsigned long r6;
+	unsigned long r5;
+	unsigned long r4;
+	unsigned long r3;
+	unsigned long r2;
+	unsigned long r1;
+	unsigned long r0;
+};
+
+#define INIT_THREAD {						\
+	.ksp = sizeof(init_stack) + (long)&init_stack,		\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define start_thread(regs, new_pc, new_sp)	 \
+	set_fs(USER_DS);			 \
+	regs->sr = 0;		/* User mode. */ \
+	regs->gr[REG_PC] = new_pc;		 \
+	regs->gr[REG_SP] = new_sp
+
+struct task_struct;
+
+/* Free all resources held by a thread */
+extern void release_thread(struct task_struct *);
+
+/* Create a kernel thread without removing it from tasklists */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while(0)
+
+/* Return saved PC of a blocked thread */
+#define thread_saved_pc(tsk)    (tsk->thread.pc)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_AVR32_PROCESSOR_H */
diff --git a/include/asm-avr32/ptrace.h b/include/asm-avr32/ptrace.h
new file mode 100644
index 0000000..c770ba0
--- /dev/null
+++ b/include/asm-avr32/ptrace.h
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_PTRACE_H
+#define __ASM_AVR32_PTRACE_H
+
+/*
+ * Status Register bits
+ */
+#define SR_H		0x40000000
+#define SR_R		0x20000000
+#define SR_J		0x10000000
+#define SR_DM		0x08000000
+#define SR_D		0x04000000
+#define MODE_NMI	0x01c00000
+#define MODE_EXCEPTION	0x01800000
+#define MODE_INT3	0x01400000
+#define MODE_INT2	0x01000000
+#define MODE_INT1	0x00c00000
+#define MODE_INT0	0x00800000
+#define MODE_SUPERVISOR	0x00400000
+#define MODE_USER	0x00000000
+#define MODE_MASK	0x01c00000
+#define SR_EM		0x00200000
+#define SR_I3M		0x00100000
+#define SR_I2M		0x00080000
+#define SR_I1M		0x00040000
+#define SR_I0M		0x00020000
+#define SR_GM		0x00010000
+
+#define MODE_SHIFT	22
+#define SR_EM_BIT	21
+#define SR_I3M_BIT	20
+#define SR_I2M_BIT	19
+#define SR_I1M_BIT	18
+#define SR_I0M_BIT	17
+#define SR_GM_BIT	16
+
+/* The user-visible part */
+#define SR_Q		0x00000010
+#define SR_V		0x00000008
+#define SR_N		0x00000004
+#define SR_Z		0x00000002
+#define SR_C		0x00000001
+
+/*
+ * The order is defined by the stdsp instruction. r0 is stored first, so it
+ * gets the highest address.
+ *
+ * Registers 0-12 are general-purpose registers (r12 is normally used for
+ * the function return value).
+ * Register 13 is the stack pointer
+ * Register 14 is the link register
+ * Register 15 is the program counter
+ */
+#define FRAME_SIZE_FULL 72
+#define REG_R12_ORIG	68
+#define REG_R0		64
+#define REG_R1		60
+#define REG_R2		56
+#define REG_R3		52
+#define REG_R4		48
+#define REG_R5		44
+#define REG_R6		40
+#define REG_R7		36
+#define REG_R8		32
+#define REG_R9		28
+#define REG_R10		34
+#define REG_R11		20
+#define REG_R12		16
+#define REG_SP		12
+#define REG_LR		 8
+
+#define FRAME_SIZE_MIN	 8
+#define REG_PC		 4
+#define REG_SR		 0
+
+#ifndef __ASSEMBLY__
+struct pt_regs {
+	/* These are always saved */
+	unsigned long sr;
+	unsigned long pc;
+
+	/* These are sometimes saved */
+	unsigned long lr;
+	unsigned long sp;
+	unsigned long r12;
+	unsigned long r11;
+	unsigned long r10;
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long r7;
+	unsigned long r6;
+	unsigned long r5;
+	unsigned long r4;
+	unsigned long r3;
+	unsigned long r2;
+	unsigned long r1;
+	unsigned long r0;
+
+	/* Only saved on system call */
+	unsigned long r12_orig;
+};
+
+#ifdef __KERNEL__
+# define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
+# define instruction_pointer(regs) ((regs)->pc)
+extern void show_regs (struct pt_regs *);
+
+static __inline__ int valid_user_regs(struct pt_regs *regs)
+{
+	/*
+	 * Some of the Java bits might be acceptable if/when we
+	 * implement some support for that stuff...
+	 */
+	if ((regs->sr & 0xffff0000) == 0)
+		return 1;
+
+	/*
+	 * Force status register flags to be sane and report this
+	 * illegal behaviour...
+	 */
+	regs->sr &= 0x0000ffff;
+	return 0;
+}
+#endif
+
+#endif /* ! __ASSEMBLY__ */
+
+#endif /* __ASM_AVR32_PTRACE_H */
diff --git a/include/asm-avr32/sdram.h b/include/asm-avr32/sdram.h
new file mode 100644
index 0000000..5057eef
--- /dev/null
+++ b/include/asm-avr32/sdram.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_SDRAM_H
+#define __ASM_AVR32_SDRAM_H
+
+struct sdram_info {
+	unsigned long phys_addr;
+	unsigned int row_bits, col_bits, bank_bits;
+	unsigned int cas, twr, trc, trp, trcd, tras, txsr;
+};
+
+extern unsigned long sdram_init(const struct sdram_info *info);
+
+#endif /* __ASM_AVR32_SDRAM_H */
diff --git a/include/asm-avr32/sections.h b/include/asm-avr32/sections.h
new file mode 100644
index 0000000..75373ab
--- /dev/null
+++ b/include/asm-avr32/sections.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_SECTIONS_H
+#define __ASM_AVR32_SECTIONS_H
+
+/* References to section boundaries */
+
+extern char _text[], _etext[];
+extern char __flashprog_start[], __flashprog_end[];
+extern char _data[], __data_lma[], _edata[], __edata_lma[];
+extern char __got_start[], __got_lma[], __got_end[];
+extern char _end[];
+
+/*
+ * Everything in .flashprog will be locked in the icache so it doesn't
+ * get disturbed when executing flash commands.
+ */
+#define __flashprog __attribute__((section(".flashprog"), __noinline__))
+
+#endif /* __ASM_AVR32_SECTIONS_H */
diff --git a/include/asm-avr32/setup.h b/include/asm-avr32/setup.h
new file mode 100644
index 0000000..e6ef8d6
--- /dev/null
+++ b/include/asm-avr32/setup.h
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * Based on linux/include/asm-arm/setup.h
+ *   Copyright (C) 1997-1999 Russel King
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_SETUP_H__
+#define __ASM_AVR32_SETUP_H__
+
+#define COMMAND_LINE_SIZE 256
+
+/* Magic number indicating that a tag table is present */
+#define ATAG_MAGIC	0xa2a25441
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Generic memory range, used by several tags.
+ *
+ *   addr is always physical.
+ *   size is measured in bytes.
+ *   next is for use by the OS, e.g. for grouping regions into
+ *	  linked lists.
+ */
+struct tag_mem_range {
+	u32			addr;
+	u32			size;
+	struct tag_mem_range *	next;
+};
+
+/* The list ends with an ATAG_NONE node. */
+#define ATAG_NONE	0x00000000
+
+struct tag_header {
+	u32 size;
+	u32 tag;
+};
+
+/* The list must start with an ATAG_CORE node */
+#define ATAG_CORE	0x54410001
+
+struct tag_core {
+	u32 flags;
+	u32 pagesize;
+	u32 rootdev;
+};
+
+/* it is allowed to have multiple ATAG_MEM nodes */
+#define ATAG_MEM	0x54410002
+/* ATAG_MEM uses tag_mem_range */
+
+/* command line: \0 terminated string */
+#define ATAG_CMDLINE	0x54410003
+
+struct tag_cmdline {
+	char	cmdline[1];	/* this is the minimum size */
+};
+
+/* Ramdisk image (may be compressed) */
+#define ATAG_RDIMG	0x54410004
+/* ATAG_RDIMG uses tag_mem_range */
+
+/* Information about various clocks present in the system */
+#define ATAG_CLOCK	0x54410005
+
+struct tag_clock {
+	u32	clock_id;	/* Which clock are we talking about? */
+	u32	clock_flags;	/* Special features */
+	u64	clock_hz;	/* Clock speed in Hz */
+};
+
+/* The clock types we know about */
+#define ACLOCK_BOOTCPU	0	/* The CPU we're booting from */
+#define ACLOCK_HSB	1	/* Deprecated */
+
+/* Memory reserved for the system (e.g. the bootloader) */
+#define ATAG_RSVD_MEM	0x54410006
+/* ATAG_RSVD_MEM uses tag_mem_range */
+
+/* Ethernet information */
+
+#define ATAG_ETHERNET	0x54410007
+
+struct tag_ethernet {
+	u8	mac_index;
+	u8	mii_phy_addr;
+	u8	hw_address[6];
+};
+
+#define AETH_INVALID_PHY	0xff
+
+struct tag {
+	struct tag_header hdr;
+	union {
+		struct tag_core core;
+		struct tag_mem_range mem_range;
+		struct tag_cmdline cmdline;
+		struct tag_clock clock;
+		struct tag_ethernet ethernet;
+	} u;
+};
+
+struct tagtable {
+	u32	tag;
+	int	(*parse)(struct tag *);
+};
+
+#define __tag __attribute_used__ __attribute__((__section__(".taglist")))
+#define __tagtable(tag, fn)						\
+	static struct tagtable __tagtable_##fn __tag = { tag, fn }
+
+#define tag_member_present(tag,member)					\
+	((unsigned long)(&((struct tag *)0L)->member + 1)		\
+	 <= (tag)->hdr.size * 4)
+
+#define tag_next(t)	((struct tag *)((u32 *)(t) + (t)->hdr.size))
+#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
+
+#define for_each_tag(t,base)						\
+	for (t = base; t->hdr.size; t = tag_next(t))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_AVR32_SETUP_H__ */
diff --git a/include/asm-avr32/string.h b/include/asm-avr32/string.h
new file mode 100644
index 0000000..8b05d1a
--- /dev/null
+++ b/include/asm-avr32/string.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_STRING_H
+#define __ASM_AVR32_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *s, int c, size_t n);
+
+#endif /* __ASM_AVR32_STRING_H */
diff --git a/include/asm-avr32/sysreg.h b/include/asm-avr32/sysreg.h
new file mode 100644
index 0000000..72ad49e
--- /dev/null
+++ b/include/asm-avr32/sysreg.h
@@ -0,0 +1,279 @@
+/*
+ * System registers for AVR32
+ */
+#ifndef __ASM_AVR32_SYSREG_H__
+#define __ASM_AVR32_SYSREG_H__
+
+/* system register offsets */
+#define SYSREG_SR			0x0000
+#define SYSREG_EVBA			0x0004
+#define SYSREG_ACBA			0x0008
+#define SYSREG_CPUCR			0x000c
+#define SYSREG_ECR			0x0010
+#define SYSREG_RSR_SUP			0x0014
+#define SYSREG_RSR_INT0			0x0018
+#define SYSREG_RSR_INT1			0x001c
+#define SYSREG_RSR_INT2			0x0020
+#define SYSREG_RSR_INT3			0x0024
+#define SYSREG_RSR_EX			0x0028
+#define SYSREG_RSR_NMI			0x002c
+#define SYSREG_RSR_DBG			0x0030
+#define SYSREG_RAR_SUP			0x0034
+#define SYSREG_RAR_INT0			0x0038
+#define SYSREG_RAR_INT1			0x003c
+#define SYSREG_RAR_INT2			0x0040
+#define SYSREG_RAR_INT3			0x0044
+#define SYSREG_RAR_EX			0x0048
+#define SYSREG_RAR_NMI			0x004c
+#define SYSREG_RAR_DBG			0x0050
+#define SYSREG_JECR			0x0054
+#define SYSREG_JOSP			0x0058
+#define SYSREG_JAVA_LV0			0x005c
+#define SYSREG_JAVA_LV1			0x0060
+#define SYSREG_JAVA_LV2			0x0064
+#define SYSREG_JAVA_LV3			0x0068
+#define SYSREG_JAVA_LV4			0x006c
+#define SYSREG_JAVA_LV5			0x0070
+#define SYSREG_JAVA_LV6			0x0074
+#define SYSREG_JAVA_LV7			0x0078
+#define SYSREG_JTBA			0x007c
+#define SYSREG_JBCR			0x0080
+#define SYSREG_CONFIG0			0x0100
+#define SYSREG_CONFIG1			0x0104
+#define SYSREG_COUNT			0x0108
+#define SYSREG_COMPARE			0x010c
+#define SYSREG_TLBEHI			0x0110
+#define SYSREG_TLBELO			0x0114
+#define SYSREG_PTBR			0x0118
+#define SYSREG_TLBEAR			0x011c
+#define SYSREG_MMUCR			0x0120
+#define SYSREG_TLBARLO			0x0124
+#define SYSREG_TLBARHI			0x0128
+#define SYSREG_PCCNT			0x012c
+#define SYSREG_PCNT0			0x0130
+#define SYSREG_PCNT1			0x0134
+#define SYSREG_PCCR			0x0138
+#define SYSREG_BEAR			0x013c
+#define SYSREG_SABAL			0x0300
+#define SYSREG_SABAH			0x0304
+#define SYSREG_SABD			0x0308
+
+/* Bitfields in SR */
+#define SYSREG_SR_C_OFFSET		0
+#define SYSREG_SR_C_SIZE		1
+#define SYSREG_Z_OFFSET			1
+#define SYSREG_Z_SIZE			1
+#define SYSREG_SR_N_OFFSET		2
+#define SYSREG_SR_N_SIZE		1
+#define SYSREG_SR_V_OFFSET		3
+#define SYSREG_SR_V_SIZE		1
+#define SYSREG_Q_OFFSET			4
+#define SYSREG_Q_SIZE			1
+#define SYSREG_L_OFFSET			5
+#define SYSREG_L_SIZE			1
+#define SYSREG_T_OFFSET			14
+#define SYSREG_T_SIZE			1
+#define SYSREG_SR_R_OFFSET		15
+#define SYSREG_SR_R_SIZE		1
+#define SYSREG_GM_OFFSET		16
+#define SYSREG_GM_SIZE			1
+#define SYSREG_I0M_OFFSET		17
+#define SYSREG_I0M_SIZE			1
+#define SYSREG_I1M_OFFSET		18
+#define SYSREG_I1M_SIZE			1
+#define SYSREG_I2M_OFFSET		19
+#define SYSREG_I2M_SIZE			1
+#define SYSREG_I3M_OFFSET		20
+#define SYSREG_I3M_SIZE			1
+#define SYSREG_EM_OFFSET		21
+#define SYSREG_EM_SIZE			1
+#define SYSREG_M0_OFFSET		22
+#define SYSREG_M0_SIZE			1
+#define SYSREG_M1_OFFSET		23
+#define SYSREG_M1_SIZE			1
+#define SYSREG_M2_OFFSET		24
+#define SYSREG_M2_SIZE			1
+#define SYSREG_SR_D_OFFSET		26
+#define SYSREG_SR_D_SIZE		1
+#define SYSREG_DM_OFFSET		27
+#define SYSREG_DM_SIZE			1
+#define SYSREG_SR_J_OFFSET		28
+#define SYSREG_SR_J_SIZE		1
+#define SYSREG_H_OFFSET			29
+#define SYSREG_H_SIZE			1
+
+/* Bitfields in CPUCR */
+#define SYSREG_BI_OFFSET		0
+#define SYSREG_BI_SIZE			1
+#define SYSREG_BE_OFFSET		1
+#define SYSREG_BE_SIZE			1
+#define SYSREG_FE_OFFSET		2
+#define SYSREG_FE_SIZE			1
+#define SYSREG_RE_OFFSET		3
+#define SYSREG_RE_SIZE			1
+#define SYSREG_IBE_OFFSET		4
+#define SYSREG_IBE_SIZE			1
+#define SYSREG_IEE_OFFSET		5
+#define SYSREG_IEE_SIZE			1
+
+/* Bitfields in ECR */
+#define SYSREG_ECR_OFFSET		0
+#define SYSREG_ECR_SIZE			32
+
+/* Bitfields in CONFIG0 */
+#define SYSREG_CONFIG0_R_OFFSET		0
+#define SYSREG_CONFIG0_R_SIZE		1
+#define SYSREG_CONFIG0_D_OFFSET		1
+#define SYSREG_CONFIG0_D_SIZE		1
+#define SYSREG_CONFIG0_S_OFFSET		2
+#define SYSREG_CONFIG0_S_SIZE		1
+#define SYSREG_O_OFFSET			3
+#define SYSREG_O_SIZE			1
+#define SYSREG_P_OFFSET			4
+#define SYSREG_P_SIZE			1
+#define SYSREG_CONFIG0_J_OFFSET		5
+#define SYSREG_CONFIG0_J_SIZE		1
+#define SYSREG_F_OFFSET			6
+#define SYSREG_F_SIZE			1
+#define SYSREG_MMUT_OFFSET		7
+#define SYSREG_MMUT_SIZE		3
+#define SYSREG_AR_OFFSET		10
+#define SYSREG_AR_SIZE			3
+#define SYSREG_AT_OFFSET		13
+#define SYSREG_AT_SIZE			3
+#define SYSREG_PROCESSORREVISION_OFFSET	16
+#define SYSREG_PROCESSORREVISION_SIZE	8
+#define SYSREG_PROCESSORID_OFFSET	24
+#define SYSREG_PROCESSORID_SIZE		8
+
+/* Bitfields in CONFIG1 */
+#define SYSREG_DASS_OFFSET		0
+#define SYSREG_DASS_SIZE		3
+#define SYSREG_DLSZ_OFFSET		3
+#define SYSREG_DLSZ_SIZE		3
+#define SYSREG_DSET_OFFSET		6
+#define SYSREG_DSET_SIZE		4
+#define SYSREG_IASS_OFFSET		10
+#define SYSREG_IASS_SIZE		3
+#define SYSREG_ILSZ_OFFSET		13
+#define SYSREG_ILSZ_SIZE		3
+#define SYSREG_ISET_OFFSET		16
+#define SYSREG_ISET_SIZE		4
+#define SYSREG_DMMUSZ_OFFSET		20
+#define SYSREG_DMMUSZ_SIZE		6
+#define SYSREG_IMMUSZ_OFFSET		26
+#define SYSREG_IMMUSZ_SIZE		6
+
+/* Bitfields in TLBEHI */
+#define SYSREG_ASID_OFFSET		0
+#define SYSREG_ASID_SIZE		8
+#define SYSREG_TLBEHI_I_OFFSET		8
+#define SYSREG_TLBEHI_I_SIZE		1
+#define SYSREG_TLBEHI_V_OFFSET		9
+#define SYSREG_TLBEHI_V_SIZE		1
+#define SYSREG_VPN_OFFSET		10
+#define SYSREG_VPN_SIZE			22
+
+/* Bitfields in TLBELO */
+#define SYSREG_W_OFFSET			0
+#define SYSREG_W_SIZE			1
+#define SYSREG_TLBELO_D_OFFSET		1
+#define SYSREG_TLBELO_D_SIZE		1
+#define SYSREG_SZ_OFFSET		2
+#define SYSREG_SZ_SIZE			2
+#define SYSREG_AP_OFFSET		4
+#define SYSREG_AP_SIZE			3
+#define SYSREG_B_OFFSET			7
+#define SYSREG_B_SIZE			1
+#define SYSREG_G_OFFSET			8
+#define SYSREG_G_SIZE			1
+#define SYSREG_TLBELO_C_OFFSET		9
+#define SYSREG_TLBELO_C_SIZE		1
+#define SYSREG_PFN_OFFSET		10
+#define SYSREG_PFN_SIZE			22
+
+/* Bitfields in MMUCR */
+#define SYSREG_E_OFFSET			0
+#define SYSREG_E_SIZE			1
+#define SYSREG_M_OFFSET			1
+#define SYSREG_M_SIZE			1
+#define SYSREG_MMUCR_I_OFFSET		2
+#define SYSREG_MMUCR_I_SIZE		1
+#define SYSREG_MMUCR_N_OFFSET		3
+#define SYSREG_MMUCR_N_SIZE		1
+#define SYSREG_MMUCR_S_OFFSET		4
+#define SYSREG_MMUCR_S_SIZE		1
+#define SYSREG_DLA_OFFSET		8
+#define SYSREG_DLA_SIZE			6
+#define SYSREG_DRP_OFFSET		14
+#define SYSREG_DRP_SIZE			6
+#define SYSREG_ILA_OFFSET		20
+#define SYSREG_ILA_SIZE			6
+#define SYSREG_IRP_OFFSET		26
+#define SYSREG_IRP_SIZE			6
+
+/* Bitfields in PCCR */
+#define SYSREG_PCCR_R_OFFSET		1
+#define SYSREG_PCCR_R_SIZE		1
+#define SYSREG_PCCR_C_OFFSET		2
+#define SYSREG_PCCR_C_SIZE		1
+#define SYSREG_PCCR_S_OFFSET		3
+#define SYSREG_PCCR_S_SIZE		1
+#define SYSREG_IEC_OFFSET		4
+#define SYSREG_IEC_SIZE			1
+#define SYSREG_IE0_OFFSET		5
+#define SYSREG_IE0_SIZE			1
+#define SYSREG_IE1_OFFSET		6
+#define SYSREG_IE1_SIZE			1
+#define SYSREG_FC_OFFSET		8
+#define SYSREG_FC_SIZE			1
+#define SYSREG_F0_OFFSET		9
+#define SYSREG_F0_SIZE			1
+#define SYSREG_F1_OFFSET		10
+#define SYSREG_F1_SIZE			1
+#define SYSREG_CONF0_OFFSET		12
+#define SYSREG_CONF0_SIZE		6
+#define SYSREG_CONF1_OFFSET		18
+#define SYSREG_CONF1_SIZE		6
+
+/* Constants for ECR */
+#define ECR_UNRECOVERABLE		0
+#define ECR_TLB_MULTIPLE		1
+#define ECR_BUS_ERROR_WRITE		2
+#define ECR_BUS_ERROR_READ		3
+#define ECR_NMI				4
+#define ECR_ADDR_ALIGN_X		5
+#define ECR_PROTECTION_X		6
+#define ECR_DEBUG			7
+#define ECR_ILLEGAL_OPCODE		8
+#define ECR_UNIMPL_INSTRUCTION		9
+#define ECR_PRIVILEGE_VIOLATION		10
+#define ECR_FPE				11
+#define ECR_COPROC_ABSENT		12
+#define ECR_ADDR_ALIGN_R		13
+#define ECR_ADDR_ALIGN_W		14
+#define ECR_PROTECTION_R		15
+#define ECR_PROTECTION_W		16
+#define ECR_DTLB_MODIFIED		17
+#define ECR_TLB_MISS_X			20
+#define ECR_TLB_MISS_R			24
+#define ECR_TLB_MISS_W			28
+
+/* Bit manipulation macros */
+#define SYSREG_BIT(name)		(1 << SYSREG_##name##_OFFSET)
+#define SYSREG_BF(name,value)				\
+	(((value) & ((1 << SYSREG_##name##_SIZE) - 1))	\
+	 << SYSREG_##name##_OFFSET)
+#define SYSREG_BFEXT(name,value)			\
+	(((value) >> SYSREG_##name##_OFFSET)		\
+	 & ((1 << SYSREG_##name##_SIZE) - 1))
+#define SYSREG_BFINS(name,value,old)			\
+	(((old) & ~(((1 << SYSREG_##name##_SIZE) - 1)	\
+		    << SYSREG_##name##_OFFSET))		\
+	 | SYSREG_BF(name,value))
+
+/* Register access macros */
+#define sysreg_read(reg)		__builtin_mfsr(SYSREG_##reg)
+#define sysreg_write(reg, value)	__builtin_mtsr(SYSREG_##reg, value)
+
+#endif /* __ASM_AVR32_SYSREG_H__ */
diff --git a/include/asm-avr32/types.h b/include/asm-avr32/types.h
new file mode 100644
index 0000000..e6c65d9
--- /dev/null
+++ b/include/asm-avr32/types.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_TYPES_H
+#define __ASM_AVR32_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef __signed__ char s8;
+typedef unsigned char u8;
+
+typedef __signed__ short s16;
+typedef unsigned short u16;
+
+typedef __signed__ int s32;
+typedef unsigned int u32;
+
+typedef __signed__ long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+
+#ifdef CONFIG_LBD
+typedef u64 sector_t;
+#define HAVE_SECTOR_T
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+
+#endif /* __ASM_AVR32_TYPES_H */
diff --git a/include/asm-avr32/u-boot.h b/include/asm-avr32/u-boot.h
new file mode 100644
index 0000000..71dfcaf
--- /dev/null
+++ b/include/asm-avr32/u-boot.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_U_BOOT_H__
+#define __ASM_U_BOOT_H__ 1
+
+typedef struct bd_info {
+	unsigned long		bi_baudrate;
+	unsigned long		bi_ip_addr;
+	unsigned char		bi_enetaddr[6];
+	unsigned char		bi_phy_id[4];
+	struct environment_s	*bi_env;
+	unsigned long		bi_board_number;
+	void			*bi_boot_params;
+	struct {
+		unsigned long	start;
+		unsigned long	size;
+	}			bi_dram[CONFIG_NR_DRAM_BANKS];
+	unsigned long		bi_flashstart;
+	unsigned long		bi_flashsize;
+	unsigned long		bi_flashoffset;
+} bd_t;
+
+#define bi_memstart bi_dram[0].start
+#define bi_memsize bi_dram[0].size
+
+/**
+ *  container_of - cast a member of a structure out to the containing structure
+ *
+ *    @ptr:        the pointer to the member.
+ *    @type:       the type of the container struct this is embedded in.
+ *    @member:     the name of the member within the struct.
+ */
+#define container_of(ptr, type, member) ({                      \
+	const typeof( ((type *)0)->member ) *__mptr = (ptr);    \
+	(type *)( (char *)__mptr - offsetof(type,member) );})
+
+#endif /* __ASM_U_BOOT_H__ */
diff --git a/include/asm-ppc/fsl_i2c.h b/include/asm-ppc/fsl_i2c.h
new file mode 100644
index 0000000..76b1c43
--- /dev/null
+++ b/include/asm-ppc/fsl_i2c.h
@@ -0,0 +1,90 @@
+/*
+ * Freescale I2C Controller
+ *
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ *
+ * Based on earlier versions by Gleb Natapov <gnatapov@mrv.com>,
+ * Xianghua Xiao <x.xiao@motorola.com>, Eran Liberty (liberty@freescale.com),
+ * and Jeff Brown.
+ * Some bits are taken from linux driver writen by adrian@humboldt.co.uk.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_FSL_I2C_H_
+#define _ASM_FSL_I2C_H_
+
+#include <asm/types.h>
+
+typedef struct fsl_i2c {
+
+	u8 adr;		/* I2C slave address */
+	u8 res0[3];
+#define I2C_ADR		0xFE
+#define I2C_ADR_SHIFT	1
+#define I2C_ADR_RES	~(I2C_ADR)
+
+	u8 fdr;		/* I2C frequency divider register */
+	u8 res1[3];
+#define IC2_FDR		0x3F
+#define IC2_FDR_SHIFT	0
+#define IC2_FDR_RES	~(IC2_FDR)
+
+	u8 cr;		/* I2C control redister	*/
+	u8 res2[3];
+#define I2C_CR_MEN	0x80
+#define I2C_CR_MIEN	0x40
+#define I2C_CR_MSTA	0x20
+#define I2C_CR_MTX	0x10
+#define I2C_CR_TXAK	0x08
+#define I2C_CR_RSTA	0x04
+#define I2C_CR_BCST	0x01
+
+	u8 sr;		/* I2C status register */
+	u8 res3[3];
+#define I2C_SR_MCF	0x80
+#define I2C_SR_MAAS	0x40
+#define I2C_SR_MBB	0x20
+#define I2C_SR_MAL	0x10
+#define I2C_SR_BCSTM	0x08
+#define I2C_SR_SRW	0x04
+#define I2C_SR_MIF	0x02
+#define I2C_SR_RXAK	0x01
+
+	u8 dr;		/* I2C data register */
+	u8 res4[3];
+#define I2C_DR		0xFF
+#define I2C_DR_SHIFT	0
+#define I2C_DR_RES	~(I2C_DR)
+
+	u8 dfsrr;	/* I2C digital filter sampling rate register */
+	u8 res5[3];
+#define I2C_DFSRR	0x3F
+#define I2C_DFSRR_SHIFT	0
+#define I2C_DFSRR_RES	~(I2C_DR)
+
+	/* Fill out the reserved block */
+	u8 res6[0xE8];
+} fsl_i2c_t;
+
+
+#define I2C_READ  1
+#define I2C_WRITE 0
+
+#endif	/* _ASM_I2C_H_ */
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 2f10e95..5377c2e 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -9,6 +9,9 @@
 #ifndef __IMMAP_85xx__
 #define __IMMAP_85xx__
 
+#include <asm/types.h>
+#include <asm/fsl_i2c.h>
+
 /*
  * Local-Access Registers and ECM Registers(0x0000-0x2000)
  */
@@ -129,37 +132,8 @@
  * I2C Registers(0x3000-0x4000)
  */
 typedef struct ccsr_i2c {
-	u_char	i2cadr;		/* 0x3000 - I2C Address Register */
-#define MPC85xx_I2CADR_MASK	0xFE
-	char	res1[3];
-	u_char	i2cfdr;		/* 0x3004 - I2C Frequency Divider Register */
-#define MPC85xx_I2CFDR_MASK	0x3F
-	char	res2[3];
-	u_char	i2ccr;		/* 0x3008 - I2C Control Register */
-#define MPC85xx_I2CCR_MEN	0x80
-#define MPC85xx_I2CCR_MIEN	0x40
-#define MPC85xx_I2CCR_MSTA      0x20
-#define MPC85xx_I2CCR_MTX       0x10
-#define MPC85xx_I2CCR_TXAK      0x08
-#define MPC85xx_I2CCR_RSTA      0x04
-#define MPC85xx_I2CCR_BCST      0x01
-	char	res3[3];
-	u_char	i2csr;		/* 0x300c - I2C Status Register */
-#define MPC85xx_I2CSR_MCF	0x80
-#define MPC85xx_I2CSR_MAAS      0x40
-#define MPC85xx_I2CSR_MBB       0x20
-#define MPC85xx_I2CSR_MAL       0x10
-#define MPC85xx_I2CSR_BCSTM     0x08
-#define MPC85xx_I2CSR_SRW       0x04
-#define MPC85xx_I2CSR_MIF       0x02
-#define MPC85xx_I2CSR_RXAK      0x01
-	char	res4[3];
-	u_char	i2cdr;		/* 0x3010 - I2C Data Register */
-#define MPC85xx_I2CDR_DATA	0xFF
-	char	res5[3];
-	u_char	i2cdfsrr;	/* 0x3014 - I2C Digital Filtering Sampling Rate Register */
-#define MPC85xx_I2CDFSRR	0x3F
-	char	res6[4075];
+	struct fsl_i2c	i2c[1];
+	u8	res[4096 - 1 * sizeof(struct fsl_i2c)];
 } ccsr_i2c_t;
 
 #if defined(CONFIG_MPC8540) \
@@ -246,7 +220,6 @@
 
 /*
  * PCI Registers(0x8000-0x9000)
- * Omitting Reserved(0x9000-0x2_0000)
  */
 typedef struct ccsr_pcix {
 	uint	cfg_addr;	/* 0x8000 - PCIX Configuration Address Register */
@@ -309,9 +282,27 @@
 	uint	peextaddrcr;	/* 0x8e14 - PCIX  Error Extended Address Capture Register */
 	uint	pedlcr;		/* 0x8e18 - PCIX Error Data Low Capture Register */
 	uint	pedhcr;		/* 0x8e1c - PCIX Error Error Data High Capture Register */
-	char	res11[94688];
+	uint	gas_timr;	/* 0x8e20 - PCIX Gasket Timer Register */
+	char	res11[476];
 } ccsr_pcix_t;
 
+#define PCIX_COMMAND	0x62
+#define POWAR_EN	0x80000000
+#define POWAR_IO_READ	0x00080000
+#define POWAR_MEM_READ	0x00040000
+#define POWAR_IO_WRITE	0x00008000
+#define POWAR_MEM_WRITE	0x00004000
+#define POWAR_MEM_512M	0x0000001c
+#define POWAR_IO_1M	0x00000013
+
+#define PIWAR_EN	0x80000000
+#define PIWAR_PF	0x20000000
+#define PIWAR_LOCAL	0x00f00000
+#define PIWAR_READ_SNOOP	0x00050000
+#define PIWAR_WRITE_SNOOP	0x00005000
+#define PIWAR_MEM_2G		0x0000001e
+
+
 /*
  * L2 Cache Registers(0x2_0000-0x2_1000)
  */
@@ -1572,6 +1563,8 @@
 	char	res15[61651];
 } ccsr_gur_t;
 
+#define PORDEVSR_PCI	(0x00800000)	/* PCI Mode */
+
 typedef struct immap {
 	ccsr_local_ecm_t	im_local_ecm;
 	ccsr_ddr_t		im_ddr;
@@ -1579,6 +1572,8 @@
 	ccsr_duart_t		im_duart;
 	ccsr_lbc_t		im_lbc;
 	ccsr_pcix_t		im_pcix;
+	ccsr_pcix_t		im_pcix2;
+	char			reserved[90112];
 	ccsr_l2cache_t		im_l2cache;
 	ccsr_dma_t		im_dma;
 	ccsr_tsec_t		im_tsec1;
diff --git a/include/asm-ppc/immap_86xx.h b/include/asm-ppc/immap_86xx.h
new file mode 100644
index 0000000..a5552c4
--- /dev/null
+++ b/include/asm-ppc/immap_86xx.h
@@ -0,0 +1,1323 @@
+/*
+ * MPC86xx Internal Memory Map
+ *
+ * Copyright(c) 2004 Freescale Semiconductor
+ * Jeff Brown (Jeffrey@freescale.com)
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ */
+
+#ifndef __IMMAP_86xx__
+#define __IMMAP_86xx__
+
+#include <asm/types.h>
+#include <asm/fsl_i2c.h>
+
+/* Local-Access Registers and MCM Registers(0x0000-0x2000) */
+typedef struct ccsr_local_mcm {
+	uint	ccsrbar;	/* 0x0 - Control Configuration Status Registers Base Address Register */
+	char	res1[4];
+	uint	altcbar;	/* 0x8 - Alternate Configuration Base Address Register */
+	char	res2[4];
+	uint	altcar;		/* 0x10 - Alternate Configuration Attribute Register */
+	char	res3[12];
+	uint	bptr;		/* 0x20 - Boot Page Translation Register */
+	char	res4[3044];
+	uint	lawbar0;	/* 0xc08 - Local Access Window 0 Base Address Register */
+	char	res5[4];
+	uint	lawar0;		/* 0xc10 - Local Access Window 0 Attributes Register */
+	char	res6[20];
+	uint	lawbar1;	/* 0xc28 - Local Access Window 1 Base Address Register */
+	char	res7[4];
+	uint	lawar1;		/* 0xc30 - Local Access Window 1 Attributes Register */
+	char	res8[20];
+	uint	lawbar2;	/* 0xc48 - Local Access Window 2 Base Address Register */
+	char	res9[4];
+	uint	lawar2;		/* 0xc50 - Local Access Window 2 Attributes Register */
+	char	res10[20];
+	uint	lawbar3;	/* 0xc68 - Local Access Window 3 Base Address Register */
+	char	res11[4];
+	uint	lawar3;		/* 0xc70 - Local Access Window 3 Attributes Register */
+	char	res12[20];
+	uint	lawbar4;	/* 0xc88 - Local Access Window 4 Base Address Register */
+	char	res13[4];
+	uint	lawar4;		/* 0xc90 - Local Access Window 4 Attributes Register */
+	char	res14[20];
+	uint	lawbar5;	/* 0xca8 - Local Access Window 5 Base Address Register */
+	char	res15[4];
+	uint	lawar5;		/* 0xcb0 - Local Access Window 5 Attributes Register */
+	char	res16[20];
+	uint	lawbar6;	/* 0xcc8 - Local Access Window 6 Base Address Register */
+	char	res17[4];
+	uint	lawar6;		/* 0xcd0 - Local Access Window 6 Attributes Register */
+	char	res18[20];
+	uint	lawbar7;	/* 0xce8 - Local Access Window 7 Base Address Register */
+	char	res19[4];
+	uint	lawar7;		/* 0xcf0 - Local Access Window 7 Attributes Register */
+	char	res20[20];
+	uint	lawbar8;	/* 0xd08 - Local Access Window 8 Base Address Register */
+	char	res21[4];
+	uint	lawar8;		/* 0xd10 - Local Access Window 8 Attributes Register */
+	char	res22[20];
+	uint	lawbar9;	/* 0xd28 - Local Access Window 9 Base Address Register */
+	char	res23[4];
+	uint	lawar9;		/* 0xd30 - Local Access Window 9 Attributes Register */
+	char	res24[716];
+	uint	abcr;		/* 0x1000 - MCM CCB Address Configuration Register */
+	char	res25[4];
+	uint    dbcr;           /* 0x1008 - MCM MPX data bus Configuration Register */
+	char	res26[4];
+	uint	pcr;		/* 0x1010 - MCM CCB Port Configuration Register */
+	char	res27[44];
+	uint	hpmr0;		/* 0x1040 - MCM HPM Threshold Count Register 0 */
+	uint	hpmr1;		/* 0x1044 - MCM HPM Threshold Count Register 1 */
+	uint	hpmr2;		/* 0x1048 - MCM HPM Threshold Count Register 2 */
+	uint	hpmr3;		/* 0x104c - MCM HPM Threshold Count Register 3 */
+	char	res28[16];
+	uint	hpmr4;		/* 0x1060 - MCM HPM Threshold Count Register 4 */
+	uint	hpmr5;		/* 0x1064 - MCM HPM Threshold Count Register 5 */
+	uint	hpmccr;		/* 0x1068 - MCM HPM Cycle Count Register */
+	char	res29[3476];
+	uint	edr;		/* 0x1e00 - MCM Error Detect Register */
+	char	res30[4];
+	uint	eer;		/* 0x1e08 - MCM Error Enable Register */
+	uint	eatr;		/* 0x1e0c - MCM Error Attributes Capture Register */
+	uint	eladr;		/* 0x1e10 - MCM Error Low Address Capture Register */
+	uint	ehadr;		/* 0x1e14 - MCM Error High Address Capture Register */
+	char	res31[488];
+} ccsr_local_mcm_t;
+
+/* DDR memory controller registers(0x2000-0x3000) and (0x6000-0x7000) */
+
+typedef struct ccsr_ddr {
+	uint	cs0_bnds;		/* 0x2000 - DDR Chip Select 0 Memory Bounds */
+	char	res1[4];
+	uint	cs1_bnds;		/* 0x2008 - DDR Chip Select 1 Memory Bounds */
+	char	res2[4];
+	uint	cs2_bnds;		/* 0x2010 - DDR Chip Select 2 Memory Bounds */
+	char	res3[4];
+	uint	cs3_bnds;		/* 0x2018 - DDR Chip Select 3 Memory Bounds */
+	char	res4[4];
+	uint	cs4_bnds;		/* 0x2020 - DDR Chip Select 4 Memory Bounds */
+	char	res5[4];
+	uint	cs5_bnds;		/* 0x2028 - DDR Chip Select 5 Memory Bounds */
+	char	res6[84];
+	uint	cs0_config;		/* 0x2080 - DDR Chip Select Configuration */
+	uint	cs1_config;		/* 0x2084 - DDR Chip Select Configuration */
+	uint	cs2_config;		/* 0x2088 - DDR Chip Select Configuration */
+	uint	cs3_config;		/* 0x208c - DDR Chip Select Configuration */
+	uint	cs4_config;		/* 0x2090 - DDR Chip Select Configuration */
+	uint	cs5_config;		/* 0x2094 - DDR Chip Select Configuration */
+	char	res7[104];
+	uint    ext_refrec;             /* 0x2100 - DDR SDRAM extended refresh recovery */
+	uint	timing_cfg_0;		/* 0x2104 - DDR SDRAM Timing Configuration Register 0 */
+	uint	timing_cfg_1;		/* 0x2108 - DDR SDRAM Timing Configuration Register 1 */
+	uint	timing_cfg_2;		/* 0x210c - DDR SDRAM Timing Configuration Register 2 */
+	uint	sdram_cfg_1;		/* 0x2110 - DDR SDRAM Control Configuration 1 */
+	uint    sdram_cfg_2;            /* 0x2114 - DDR SDRAM Control Configuration 2 */
+	uint	sdram_mode_1;		/* 0x2118 - DDR SDRAM Mode Configuration 1 */
+	uint    sdram_mode_2;		/* 0x211c - DDR SDRAM Mode Configuration 2 */
+	uint    sdram_mode_cntl;        /* 0x2120 - DDR SDRAM Mode Control */
+	uint	sdram_interval;		/* 0x2124 - DDR SDRAM Interval Configuration */
+	uint    sdram_data_init; 	/* 0x2128 - DDR SDRAM Data Initialization */
+	char	res8[4];
+	uint	sdram_clk_cntl;		/* 0x2130 - DDR SDRAM Clock Control */
+	char    res9[12];
+	uint    sdram_ocd_cntl;		/* 0x2140 - DDR SDRAM OCD Control */
+	uint    sdram_ocd_status;	/* 0x2144 - DDR SDRAM OCD Status */
+	uint    init_addr;		/* 0x2148 - DDR training initialzation address */
+	uint    init_addr_ext;		/* 0x214C - DDR training initialzation extended address */
+	char    res10[2728];
+	uint    ip_rev1;		/* 0x2BF8 - DDR IP Block Revision 1 */
+	uint    ip_rev2;		/* 0x2BFC - DDR IP Block Revision 2 */
+	char	res11[512];
+	uint	data_err_inject_hi;	/* 0x2e00 - DDR Memory Data Path Error Injection Mask High */
+	uint	data_err_inject_lo;	/* 0x2e04 - DDR Memory Data Path Error Injection Mask Low */
+	uint	ecc_err_inject;		/* 0x2e08 - DDR Memory Data Path Error Injection Mask ECC */
+	char	res12[20];
+	uint	capture_data_hi;	/* 0x2e20 - DDR Memory Data Path Read Capture High */
+	uint	capture_data_lo;	/* 0x2e24 - DDR Memory Data Path Read Capture Low */
+	uint	capture_ecc;		/* 0x2e28 - DDR Memory Data Path Read Capture ECC */
+	char	res13[20];
+	uint	err_detect;		/* 0x2e40 - DDR Memory Error Detect */
+	uint	err_disable;		/* 0x2e44 - DDR Memory Error Disable */
+	uint	err_int_en;		/* 0x2e48 - DDR Memory Error Interrupt Enable */
+	uint	capture_attributes;	/* 0x2e4c - DDR Memory Error Attributes Capture */
+	uint	capture_address;	/* 0x2e50 - DDR Memory Error Address Capture */
+	uint	capture_ext_address;	/* 0x2e54 - DDR Memory Error Extended Address Capture */
+	uint	err_sbe;		/* 0x2e58 - DDR Memory Single-Bit ECC Error Management */
+	char	res14[164];
+	uint	debug_1;		/* 0x2f00 */
+	uint	debug_2;
+	uint	debug_3;
+	uint	debug_4;
+	uint	debug_5;
+	char	res15[236];
+} ccsr_ddr_t;
+
+
+/* Daul I2C Registers(0x3000-0x4000) */
+typedef struct ccsr_i2c {
+	struct fsl_i2c	i2c[2];
+	u8	res[4096 - 2 * sizeof(struct fsl_i2c)];
+} ccsr_i2c_t;
+
+/* DUART Registers(0x4000-0x5000) */
+typedef struct ccsr_duart {
+	char	res1[1280];
+	u_char	urbr1_uthr1_udlb1;/* 0x4500 - URBR1, UTHR1, UDLB1 with the same address offset of 0x04500 */
+	u_char	uier1_udmb1;	/* 0x4501 - UIER1, UDMB1 with the same address offset of 0x04501 */
+	u_char	uiir1_ufcr1_uafr1;/* 0x4502 - UIIR1, UFCR1, UAFR1 with the same address offset of 0x04502 */
+	u_char	ulcr1;		/* 0x4503 - UART1 Line Control Register */
+	u_char	umcr1;		/* 0x4504 - UART1 Modem Control Register */
+	u_char	ulsr1;		/* 0x4505 - UART1 Line Status Register */
+	u_char	umsr1;		/* 0x4506 - UART1 Modem Status Register */
+	u_char	uscr1;		/* 0x4507 - UART1 Scratch Register */
+	char	res2[8];
+	u_char	udsr1;		/* 0x4510 - UART1 DMA Status Register */
+	char	res3[239];
+	u_char	urbr2_uthr2_udlb2;/* 0x4600 - URBR2, UTHR2, UDLB2 with the same address offset of 0x04600 */
+	u_char	uier2_udmb2;	/* 0x4601 - UIER2, UDMB2 with the same address offset of 0x04601 */
+	u_char	uiir2_ufcr2_uafr2;/* 0x4602 - UIIR2, UFCR2, UAFR2 with the same address offset of 0x04602 */
+	u_char	ulcr2;		/* 0x4603 - UART2 Line Control Register */
+	u_char	umcr2;		/* 0x4604 - UART2 Modem Control Register */
+	u_char	ulsr2;		/* 0x4605 - UART2 Line Status Register */
+	u_char	umsr2;		/* 0x4606 - UART2 Modem Status Register */
+	u_char	uscr2;		/* 0x4607 - UART2 Scratch Register */
+	char	res4[8];
+	u_char	udsr2;		/* 0x4610 - UART2 DMA Status Register */
+	char	res5[2543];
+} ccsr_duart_t;
+
+
+/* Local Bus Controller Registers(0x5000-0x6000) */
+typedef struct ccsr_lbc {
+	uint	br0;		/* 0x5000 - LBC Base Register 0 */
+	uint	or0;		/* 0x5004 - LBC Options Register 0 */
+	uint	br1;		/* 0x5008 - LBC Base Register 1 */
+	uint	or1;		/* 0x500c - LBC Options Register 1 */
+	uint	br2;		/* 0x5010 - LBC Base Register 2 */
+	uint	or2;		/* 0x5014 - LBC Options Register 2 */
+	uint	br3;		/* 0x5018 - LBC Base Register 3 */
+	uint	or3;		/* 0x501c - LBC Options Register 3 */
+	uint	br4;		/* 0x5020 - LBC Base Register 4 */
+	uint	or4;		/* 0x5024 - LBC Options Register 4 */
+	uint	br5;		/* 0x5028 - LBC Base Register 5 */
+	uint	or5;		/* 0x502c - LBC Options Register 5 */
+	uint	br6;		/* 0x5030 - LBC Base Register 6 */
+	uint	or6;		/* 0x5034 - LBC Options Register 6 */
+	uint	br7;		/* 0x5038 - LBC Base Register 7 */
+	uint	or7;		/* 0x503c - LBC Options Register 7 */
+	char	res1[40];
+	uint	mar;		/* 0x5068 - LBC UPM Address Register */
+	char	res2[4];
+	uint	mamr;		/* 0x5070 - LBC UPMA Mode Register */
+	uint	mbmr;		/* 0x5074 - LBC UPMB Mode Register */
+	uint	mcmr;		/* 0x5078 - LBC UPMC Mode Register */
+	char	res3[8];
+	uint	mrtpr;		/* 0x5084 - LBC Memory Refresh Timer Prescaler Register */
+	uint	mdr;		/* 0x5088 - LBC UPM Data Register */
+	char	res4[8];
+	uint	lsdmr;		/* 0x5094 - LBC SDRAM Mode Register */
+	char	res5[8];
+	uint	lurt;		/* 0x50a0 - LBC UPM Refresh Timer */
+	uint	lsrt;		/* 0x50a4 - LBC SDRAM Refresh Timer */
+	char	res6[8];
+	uint	ltesr;		/* 0x50b0 - LBC Transfer Error Status Register */
+	uint	ltedr;		/* 0x50b4 - LBC Transfer Error Disable Register */
+	uint	lteir;		/* 0x50b8 - LBC Transfer Error Interrupt Register */
+	uint	lteatr;		/* 0x50bc - LBC Transfer Error Attributes Register */
+	uint	ltear;		/* 0x50c0 - LBC Transfer Error Address Register */
+	char	res7[12];
+	uint	lbcr;		/* 0x50d0 - LBC Configuration Register */
+	uint	lcrr;		/* 0x50d4 - LBC Clock Ratio Register */
+	char	res8[3880];
+} ccsr_lbc_t;
+
+/* PCI Express Registers(0x8000-0x9000) and (0x9000-0xA000) */
+typedef struct ccsr_pex {
+	uint	cfg_addr;	/* 0x8000 - PEX Configuration Address Register */
+	uint	cfg_data;	/* 0x8004 - PEX Configuration Data Register */
+	char	res1[4];
+	uint	out_comp_to;	/* 0x800C - PEX Outbound Completion Timeout Register */
+	char	res2[16];
+	uint	pme_msg_det;	/* 0x8020 - PEX PME & message detect register */
+	uint    pme_msg_int_en;	/* 0x8024 - PEX PME & message interrupt enable register */
+	uint    pme_msg_dis;	/* 0x8028 - PEX PME & message disable register */
+	uint    pm_command;	/* 0x802c - PEX PM Command register */
+	char	res3[3016];
+	uint    block_rev1;	/* 0x8bf8 - PEX Block Revision register 1 */
+	uint    block_rev2;	/* 0x8bfc - PEX Block Revision register 2 */
+	uint	potar0;	        /* 0x8c00 - PEX Outbound Transaction Address Register 0 */
+	uint	potear0;	/* 0x8c04 - PEX Outbound Translation Extended Address Register 0 */
+	char	res4[8];
+	uint	powar0;	        /* 0x8c10 - PEX Outbound Window Attributes Register 0 */
+	char	res5[12];
+	uint	potar1;	        /* 0x8c20 - PEX Outbound Transaction Address Register 1 */
+	uint	potear1;	/* 0x8c24 - PEX Outbound Translation Extended Address Register 1 */
+	uint	powbar1;	/* 0x8c28 - PEX Outbound Window Base Address Register 1 */
+	char	res6[4];
+	uint	powar1;	        /* 0x8c30 - PEX Outbound Window Attributes Register 1 */
+	char	res7[12];
+	uint	potar2;	        /* 0x8c40 - PEX Outbound Transaction Address Register 2 */
+	uint	potear2;	/* 0x8c44 - PEX Outbound Translation Extended Address Register 2 */
+	uint	powbar2;	/* 0x8c48 - PEX Outbound Window Base Address Register 2 */
+	char	res8[4];
+	uint	powar2;	        /* 0x8c50 - PEX Outbound Window Attributes Register 2 */
+	char	res9[12];
+	uint	potar3;	        /* 0x8c60 - PEX Outbound Transaction Address Register 3 */
+	uint	potear3;	/* 0x8c64 - PEX Outbound Translation Extended Address Register 3 */
+	uint	powbar3;	/* 0x8c68 - PEX Outbound Window Base Address Register 3 */
+	char	res10[4];
+	uint	powar3;	        /* 0x8c70 - PEX Outbound Window Attributes Register 3 */
+	char	res11[12];
+	uint	potar4;	        /* 0x8c80 - PEX Outbound Transaction Address Register 4 */
+	uint	potear4;	/* 0x8c84 - PEX Outbound Translation Extended Address Register 4 */
+	uint	powbar4;	/* 0x8c88 - PEX Outbound Window Base Address Register 4 */
+	char	res12[4];
+	uint	powar4;	        /* 0x8c90 - PEX Outbound Window Attributes Register 4 */
+	char	res13[12];
+	char	res14[256];
+	uint	pitar3;	        /* 0x8da0 - PEX Inbound Translation Address Register 3  */
+	char	res15[4];
+	uint	piwbar3;	/* 0x8da8 - PEX Inbound Window Base Address Register 3 */
+	uint	piwbear3;	/* 0x8dac - PEX Inbound Window Base Extended Address Register 3 */
+	uint	piwar3;	        /* 0x8db0 - PEX Inbound Window Attributes Register 3 */
+	char	res16[12];
+	uint	pitar2;	        /* 0x8dc0 - PEX Inbound Translation Address Register 2  */
+	char	res17[4];
+	uint	piwbar2;	/* 0x8dc8 - PEX Inbound Window Base Address Register 2 */
+	uint	piwbear2;	/* 0x8dcc - PEX Inbound Window Base Extended Address Register 2 */
+	uint	piwar2;	        /* 0x8dd0 - PEX Inbound Window Attributes Register 2 */
+	char	res18[12];
+	uint	pitar1;	        /* 0x8de0 - PEX Inbound Translation Address Register 1  */
+	char	res19[4];
+	uint	piwbar1;	/* 0x8de8 - PEX Inbound Window Base Address Register 1 */
+	uint	piwbear1;
+	uint	piwar1;	        /* 0x8df0 - PEX Inbound Window Attributes Register 1 */
+	char	res20[12];
+	uint	pedr;		/* 0x8e00 - PEX Error Detect Register */
+	char    res21[4];
+	uint	peer;		/* 0x8e08 - PEX Error Interrupt Enable Register */
+	char    res22[4];
+	uint	pecdr;		/* 0x8e10 - PEX Error Disable Register */
+	char    res23[12];
+	uint	peer_stat;	/* 0x8e20 - PEX Error Capture Status Register */
+	char    res24[4];
+	uint	perr_cap0;	/* 0x8e28 - PEX Error Capture Register 0 */
+	uint	perr_cap1;	/* 0x8e2c - PEX Error Capture Register 1 */
+	uint	perr_cap2;	/* 0x8e30 - PEX Error Capture Register 2 */
+	uint	perr_cap3;	/* 0x8e34 - PEX Error Capture Register 3 */
+	char	res25[452];
+	char    res26[4];
+} ccsr_pex_t;
+
+/* Hyper Transport Register Block (0xA000-0xB000) */
+typedef struct ccsr_ht {
+	uint    hcfg_addr;      /* 0xa000 - HT Configuration Address register */
+	uint    hcfg_data;      /* 0xa004 - HT Configuration Data register */
+	char	res1[3064];
+	uint    howtar0;        /* 0xac00 - HT Outbound Window 0 Translation register */
+	char	res2[12];
+	uint    howar0;         /* 0xac10 - HT Outbound Window 0 Attributes register */
+	char	res3[12];
+	uint    howtar1;        /* 0xac20 - HT Outbound Window 1 Translation register */
+	char	res4[4];
+	uint    howbar1;        /* 0xac28 - HT Outbound Window 1 Base Address register */
+	char	res5[4];
+	uint    howar1;         /* 0xac30 - HT Outbound Window 1 Attributes register */
+	char	res6[12];
+	uint    howtar2;        /* 0xac40 - HT Outbound Window 2 Translation register */
+	char	res7[4];
+	uint    howbar2;        /* 0xac48 - HT Outbound Window 2 Base Address register */
+	char	res8[4];
+	uint    howar2;         /* 0xac50 - HT Outbound Window 2 Attributes register */
+	char	res9[12];
+	uint    howtar3;        /* 0xac60 - HT Outbound Window 3 Translation register */
+	char	res10[4];
+	uint    howbar3;        /* 0xac68 - HT Outbound Window 3 Base Address register */
+	char	res11[4];
+	uint    howar3;         /* 0xac70 - HT Outbound Window 3 Attributes  register */
+	char	res12[12];
+	uint    howtar4;        /* 0xac80 - HT Outbound Window 4 Translation register */
+	char	res13[4];
+	uint    howbar4;        /* 0xac88 - HT Outbound Window 4 Base Address register */
+	char	res14[4];
+	uint    howar4;         /* 0xac90 - HT Outbound Window 4 Attributes register */
+	char	res15[236];
+	uint    hiwtar4;        /* 0xad80 - HT Inbound Window 4 Translation register */
+	char	res16[4];
+	uint    hiwbar4;        /* 0xad88 - HT Inbound Window 4 Base Address register */
+	char	res17[4];
+	uint    hiwar4;         /* 0xad90 - HT Inbound Window 4 Attributes register */
+	char	res18[12];
+	uint    hiwtar3;        /* 0xada0 - HT Inbound Window 3 Translation register */
+	char	res19[4];
+	uint    hiwbar3;        /* 0xada8 - HT Inbound Window 3 Base Address register */
+	char	res20[4];
+	uint    hiwar3;         /* 0xadb0 - HT Inbound Window 3 Attributes register */
+	char	res21[12];
+	uint    hiwtar2;        /* 0xadc0 - HT Inbound Window 2 Translation register */
+	char	res22[4];
+	uint    hiwbar2;        /* 0xadc8 - HT Inbound Window 2 Base Address register */
+	char	res23[4];
+	uint    hiwar2;         /* 0xadd0 - HT Inbound Window 2 Attributes register */
+	char	res24[12];
+	uint    hiwtar1;        /* 0xade0 - HT Inbound Window 1 Translation register */
+	char	res25[4];
+	uint    hiwbar1;        /* 0xade8 - HT Inbound Window 1 Base Address register */
+	char	res26[4];
+	uint    hiwar1;         /* 0xadf0 - HT Inbound Window 1 Attributes register */
+	char	res27[12];
+	uint    hedr;           /* 0xae00 - HT Error Detect register */
+	char	res28[4];
+	uint    heier;          /* 0xae08 - HT Error Interrupt Enable register */
+	char	res29[4];
+	uint    hecdr;          /* 0xae10 - HT Error Capture Disbale register */
+	char	res30[12];
+	uint    hecsr;          /* 0xae20 - HT Error Capture Status register */
+	char	res31[4];
+	uint    hec0;           /* 0xae28 - HT Error Capture 0 register */
+	uint    hec1;           /* 0xae2c - HT Error Capture 1 register */
+	uint    hec2;           /* 0xae30 - HT Error Capture 2 register */
+	char    res32[460];
+} ccsr_ht_t;
+
+/* DMA Registers(0x2_1000-0x2_2000) */
+typedef struct ccsr_dma {
+	char	res1[256];
+	uint	mr0;		/* 0x21100 - DMA 0 Mode Register */
+	uint	sr0;		/* 0x21104 - DMA 0 Status Register */
+	char	res2[4];
+	uint	clndar0;	/* 0x2110c - DMA 0 Current Link Descriptor Address Register */
+	uint	satr0;		/* 0x21110 - DMA 0 Source Attributes Register */
+	uint	sar0;		/* 0x21114 - DMA 0 Source Address Register */
+	uint	datr0;		/* 0x21118 - DMA 0 Destination Attributes Register */
+	uint	dar0;		/* 0x2111c - DMA 0 Destination Address Register */
+	uint	bcr0;		/* 0x21120 - DMA 0 Byte Count Register */
+	char	res3[4];
+	uint	nlndar0;	/* 0x21128 - DMA 0 Next Link Descriptor Address Register */
+	char	res4[8];
+	uint	clabdar0;	/* 0x21134 - DMA 0 Current List - Alternate Base Descriptor Address Register */
+	char	res5[4];
+	uint	nlsdar0;	/* 0x2113c - DMA 0 Next List Descriptor Address Register */
+	uint	ssr0;		/* 0x21140 - DMA 0 Source Stride Register */
+	uint	dsr0;		/* 0x21144 - DMA 0 Destination Stride Register */
+	char	res6[56];
+	uint	mr1;		/* 0x21180 - DMA 1 Mode Register */
+	uint	sr1;		/* 0x21184 - DMA 1 Status Register */
+	char	res7[4];
+	uint	clndar1;	/* 0x2118c - DMA 1 Current Link Descriptor Address Register */
+	uint	satr1;		/* 0x21190 - DMA 1 Source Attributes Register */
+	uint	sar1;		/* 0x21194 - DMA 1 Source Address Register */
+	uint	datr1;		/* 0x21198 - DMA 1 Destination Attributes Register */
+	uint	dar1;		/* 0x2119c - DMA 1 Destination Address Register */
+	uint	bcr1;		/* 0x211a0 - DMA 1 Byte Count Register */
+	char	res8[4];
+	uint	nlndar1;	/* 0x211a8 - DMA 1 Next Link Descriptor Address Register */
+	char	res9[8];
+	uint	clabdar1;	/* 0x211b4 - DMA 1 Current List - Alternate Base Descriptor Address Register */
+	char	res10[4];
+	uint	nlsdar1;	/* 0x211bc - DMA 1 Next List Descriptor Address Register */
+	uint	ssr1;		/* 0x211c0 - DMA 1 Source Stride Register */
+	uint	dsr1;		/* 0x211c4 - DMA 1 Destination Stride Register */
+	char	res11[56];
+	uint	mr2;		/* 0x21200 - DMA 2 Mode Register */
+	uint	sr2;		/* 0x21204 - DMA 2 Status Register */
+	char	res12[4];
+	uint	clndar2;	/* 0x2120c - DMA 2 Current Link Descriptor Address Register */
+	uint	satr2;		/* 0x21210 - DMA 2 Source Attributes Register */
+	uint	sar2;		/* 0x21214 - DMA 2 Source Address Register */
+	uint	datr2;		/* 0x21218 - DMA 2 Destination Attributes Register */
+	uint	dar2;		/* 0x2121c - DMA 2 Destination Address Register */
+	uint	bcr2;		/* 0x21220 - DMA 2 Byte Count Register */
+	char	res13[4];
+	uint	nlndar2;	/* 0x21228 - DMA 2 Next Link Descriptor Address Register */
+	char	res14[8];
+	uint	clabdar2;	/* 0x21234 - DMA 2 Current List - Alternate Base Descriptor Address Register */
+	char	res15[4];
+	uint	nlsdar2;	/* 0x2123c - DMA 2 Next List Descriptor Address Register */
+	uint	ssr2;		/* 0x21240 - DMA 2 Source Stride Register */
+	uint	dsr2;		/* 0x21244 - DMA 2 Destination Stride Register */
+	char	res16[56];
+	uint	mr3;		/* 0x21280 - DMA 3 Mode Register */
+	uint	sr3;		/* 0x21284 - DMA 3 Status Register */
+	char	res17[4];
+	uint	clndar3;	/* 0x2128c - DMA 3 Current Link Descriptor Address Register */
+	uint	satr3;		/* 0x21290 - DMA 3 Source Attributes Register */
+	uint	sar3;		/* 0x21294 - DMA 3 Source Address Register */
+	uint	datr3;		/* 0x21298 - DMA 3 Destination Attributes Register */
+	uint	dar3;		/* 0x2129c - DMA 3 Destination Address Register */
+	uint	bcr3;		/* 0x212a0 - DMA 3 Byte Count Register */
+	char	res18[4];
+	uint	nlndar3;	/* 0x212a8 - DMA 3 Next Link Descriptor Address Register */
+	char	res19[8];
+	uint	clabdar3;	/* 0x212b4 - DMA 3 Current List - Alternate Base Descriptor Address Register */
+	char	res20[4];
+	uint	nlsdar3;	/* 0x212bc - DMA 3 Next List Descriptor Address Register */
+	uint	ssr3;		/* 0x212c0 - DMA 3 Source Stride Register */
+	uint	dsr3;		/* 0x212c4 - DMA 3 Destination Stride Register */
+	char	res21[56];
+	uint	dgsr;		/* 0x21300 - DMA General Status Register */
+	char	res22[3324];
+} ccsr_dma_t;
+
+/* tsec1-4: 24000-28000 */
+typedef struct ccsr_tsec {
+	uint    id; 		/* 0x24000 - Controller ID Register */
+	char	res1[12];
+	uint	ievent;		/* 0x24010 - Interrupt Event Register */
+	uint	imask;		/* 0x24014 - Interrupt Mask Register */
+	uint	edis;		/* 0x24018 - Error Disabled Register */
+	char	res2[4];
+	uint	ecntrl;		/* 0x24020 - Ethernet Control Register */
+	char    res2_1[4];
+	uint	ptv;		/* 0x24028 - Pause Time Value Register */
+	uint	dmactrl;	/* 0x2402c - DMA Control Register */
+	uint	tbipa;		/* 0x24030 - TBI PHY Address Register */
+	char	res3[88];
+	uint	fifo_tx_thr;	/* 0x2408c - FIFO transmit threshold register */
+	char	res4[8];
+	uint	fifo_tx_starve;	/* 0x24098 - FIFO transmit starve register */
+	uint	fifo_tx_starve_shutoff;/* 0x2409c - FIFO transmit starve shutoff register */
+	char    res4_1[4];
+	uint    fifo_rx_pause;  /* 0x240a4 - FIFO receive pause threshold register */
+	uint    fifo_rx_alarm;  /* 0x240a8 - FIFO receive alarm threshold register */
+	char	res5[84];
+	uint	tctrl;		/* 0x24100 - Transmit Control Register */
+	uint	tstat;		/* 0x24104 - Transmit Status Register */
+	uint    dfvlan;		/* 0x24108 - Default VLAN control word */
+	char    res6[4];
+	uint    txic;		/* 0x24110 - Transmit interrupt coalescing Register */
+	uint    tqueue;         /* 0x24114 - Transmit Queue Control Register */
+	char	res7[40];
+	uint    tr03wt;         /* 0x24140 - TxBD Rings 0-3 round-robin weightings */
+	uint    tw47wt;         /* 0x24144 - TxBD Rings 4-7 round-robin weightings */
+	char    res8[52];
+	uint	tbdbph;	        /* 0x2417c - Transmit Data Buffer Pointer High Register */
+	char    res9[4];
+	uint    tbptr0;         /* 0x24184 - Transmit Buffer Descriptor Pointer for Ring 0 */
+	char    res10[4];
+	uint    tbptr1;         /* 0x2418C - Transmit Buffer Descriptor Pointer for Ring 1 */
+	char    res11[4];
+	uint    tbptr2;         /* 0x24194 - Transmit Buffer Descriptor Pointer for Ring 2 */
+	char    res12[4];
+	uint    tbptr3;         /* 0x2419C - Transmit Buffer Descriptor Pointer for Ring 3 */
+	char    res13[4];
+	uint    tbptr4;         /* 0x241A4 - Transmit Buffer Descriptor Pointer for Ring 4 */
+	char    res14[4];
+	uint    tbptr5;         /* 0x241AC - Transmit Buffer Descriptor Pointer for Ring 5 */
+	char    res15[4];
+	uint    tbptr6;         /* 0x241B4 - Transmit Buffer Descriptor Pointer for Ring 6 */
+	char    res16[4];
+	uint    tbptr7;         /* 0x241BC - Transmit Buffer Descriptor Pointer for Ring 7 */
+	char    res17[64];
+	uint	tbaseh;		/* 0x24200 - Transmit Descriptor Base Address High Register */
+	uint	tbase0;		/* 0x24204 - Transmit Descriptor Base Address Register of Ring 0 */
+	char    res18[4];
+	uint    tbase1;         /* 0x2420C - Transmit Descriptor base address of Ring 1 */
+	char    res19[4];
+	uint    tbase2;         /* 0x24214 - Transmit Descriptor base address of Ring 2 */
+	char    res20[4];
+	uint    tbase3;         /* 0x2421C - Transmit Descriptor base address of Ring 3 */
+	char    res21[4];
+	uint    tbase4;         /* 0x24224 - Transmit Descriptor base address of Ring 4 */
+	char    res22[4];
+	uint    tbase5;         /* 0x2422C - Transmit Descriptor base address of Ring 5 */
+	char    res23[4];
+	uint    tbase6;         /* 0x24234 - Transmit Descriptor base address of Ring 6 */
+	char    res24[4];
+	uint    tbase7;         /* 0x2423C - Transmit Descriptor base address of Ring 7 */
+	char    res25[192];
+	uint	rctrl;		/* 0x24300 - Receive Control Register */
+	uint	rstat;		/* 0x24304 - Receive Status Register */
+	char	res26[8];
+	uint    rxic;           /* 0x24310 - Receive Interrupt Coalecing Register */
+	uint    rqueue;         /* 0x24314 - Receive queue control register */
+	char	res27[24];
+	uint    rbifx;		/* 0x24330 - Receive bit field extract control Register */
+	uint    rqfar;		/* 0x24334 - Receive queue filing table address Register */
+	uint    rqfcr;		/* 0x24338 - Receive queue filing table control Register */
+	uint    rqfpr;      	/* 0x2433c - Receive queue filing table property Register */
+	uint	mrblr;		/* 0x24340 - Maximum Receive Buffer Length Register */
+	char	res28[56];
+	uint    rbdbph;		/* 0x2437C - Receive Data Buffer Pointer High */
+	char    res29[4];
+	uint	rbptr0;		/* 0x24384 - Receive Buffer Descriptor Pointer for Ring 0 */
+	char    res30[4];
+	uint	rbptr1;		/* 0x2438C - Receive Buffer Descriptor Pointer for Ring 1 */
+	char    res31[4];
+	uint	rbptr2;		/* 0x24394 - Receive Buffer Descriptor Pointer for Ring 2 */
+	char    res32[4];
+	uint	rbptr3;		/* 0x2439C - Receive Buffer Descriptor Pointer for Ring 3 */
+	char    res33[4];
+	uint	rbptr4;		/* 0x243A4 - Receive Buffer Descriptor Pointer for Ring 4 */
+	char    res34[4];
+	uint	rbptr5;		/* 0x243AC - Receive Buffer Descriptor Pointer for Ring 5 */
+	char    res35[4];
+	uint	rbptr6;		/* 0x243B4 - Receive Buffer Descriptor Pointer for Ring 6 */
+	char    res36[4];
+	uint	rbptr7;		/* 0x243BC - Receive Buffer Descriptor Pointer for Ring 7 */
+	char    res37[64];
+	uint	rbaseh;		/* 0x24400 - Receive Descriptor Base Address High 0 */
+	uint	rbase0;		/* 0x24404 - Receive Descriptor Base Address of Ring 0 */
+	char    res38[4];
+	uint	rbase1;		/* 0x2440C - Receive Descriptor Base Address of Ring 1 */
+	char    res39[4];
+	uint	rbase2;		/* 0x24414 - Receive Descriptor Base Address of Ring 2 */
+	char    res40[4];
+	uint	rbase3;		/* 0x2441C - Receive Descriptor Base Address of Ring 3 */
+	char    res41[4];
+	uint	rbase4;		/* 0x24424 - Receive Descriptor Base Address of Ring 4 */
+	char    res42[4];
+	uint	rbase5;		/* 0x2442C - Receive Descriptor Base Address of Ring 5 */
+	char    res43[4];
+	uint	rbase6;		/* 0x24434 - Receive Descriptor Base Address of Ring 6 */
+	char    res44[4];
+	uint	rbase7;		/* 0x2443C - Receive Descriptor Base Address of Ring 7 */
+	char    res45[192];
+	uint	maccfg1;	/* 0x24500 - MAC Configuration 1 Register */
+	uint	maccfg2;	/* 0x24504 - MAC Configuration 2 Register */
+	uint	ipgifg;		/* 0x24508 - Inter Packet Gap/Inter Frame Gap Register */
+	uint	hafdup;		/* 0x2450c - Half Duplex Register */
+	uint	maxfrm;		/* 0x24510 - Maximum Frame Length Register */
+	char	res46[12];
+	uint	miimcfg;	/* 0x24520 - MII Management Configuration Register */
+	uint	miimcom;	/* 0x24524 - MII Management Command Register */
+	uint	miimadd;	/* 0x24528 - MII Management Address Register */
+	uint	miimcon;	/* 0x2452c - MII Management Control Register */
+	uint	miimstat;	/* 0x24530 - MII Management Status Register */
+	uint	miimind;	/* 0x24534 - MII Management Indicator Register */
+	uint    ifctrl;		/* 0x24538 - Interface Contrl Register */
+	uint	ifstat;		/* 0x2453c - Interface Status Register */
+	uint	macstnaddr1;	/* 0x24540 - Station Address Part 1 Register */
+	uint	macstnaddr2;	/* 0x24544 - Station Address Part 2 Register */
+	uint    mac01addr1;     /* 0x24548 - MAC exact match address 1, part 1 */
+	uint    mac01addr2;     /* 0x2454C - MAC exact match address 1, part 2 */
+	uint    mac02addr1;     /* 0x24550 - MAC exact match address 2, part 1 */
+	uint    mac02addr2;     /* 0x24554 - MAC exact match address 2, part 2 */
+	uint    mac03addr1;     /* 0x24558 - MAC exact match address 3, part 1 */
+	uint    mac03addr2;     /* 0x2455C - MAC exact match address 3, part 2 */
+	uint    mac04addr1;     /* 0x24560 - MAC exact match address 4, part 1 */
+	uint    mac04addr2;     /* 0x24564 - MAC exact match address 4, part 2 */
+	uint    mac05addr1;     /* 0x24568 - MAC exact match address 5, part 1 */
+	uint    mac05addr2;     /* 0x2456C - MAC exact match address 5, part 2 */
+	uint    mac06addr1;     /* 0x24570 - MAC exact match address 6, part 1 */
+	uint    mac06addr2;     /* 0x24574 - MAC exact match address 6, part 2 */
+	uint    mac07addr1;     /* 0x24578 - MAC exact match address 7, part 1 */
+	uint    mac07addr2;     /* 0x2457C - MAC exact match address 7, part 2 */
+	uint    mac08addr1;     /* 0x24580 - MAC exact match address 8, part 1 */
+	uint    mac08addr2;     /* 0x24584 - MAC exact match address 8, part 2 */
+	uint    mac09addr1;     /* 0x24588 - MAC exact match address 9, part 1 */
+	uint    mac09addr2;     /* 0x2458C - MAC exact match address 9, part 2 */
+	uint    mac10addr1;     /* 0x24590 - MAC exact match address 10, part 1 */
+	uint    mac10addr2;     /* 0x24594 - MAC exact match address 10, part 2 */
+	uint    mac11addr1;     /* 0x24598 - MAC exact match address 11, part 1 */
+	uint    mac11addr2;     /* 0x2459C - MAC exact match address 11, part 2 */
+	uint    mac12addr1;     /* 0x245A0 - MAC exact match address 12, part 1 */
+	uint    mac12addr2;     /* 0x245A4 - MAC exact match address 12, part 2 */
+	uint    mac13addr1;     /* 0x245A8 - MAC exact match address 13, part 1 */
+	uint    mac13addr2;     /* 0x245AC - MAC exact match address 13, part 2 */
+	uint    mac14addr1;     /* 0x245B0 - MAC exact match address 14, part 1 */
+	uint    mac14addr2;     /* 0x245B4 - MAC exact match address 14, part 2 */
+	uint    mac15addr1;     /* 0x245B8 - MAC exact match address 15, part 1 */
+	uint    mac15addr2;     /* 0x245BC - MAC exact match address 15, part 2 */
+	char	res48[192];
+	uint	tr64;		/* 0x24680 - Transmit and Receive 64-byte Frame Counter */
+	uint	tr127;		/* 0x24684 - Transmit and Receive 65-127 byte Frame Counter */
+	uint	tr255;		/* 0x24688 - Transmit and Receive 128-255 byte Frame Counter */
+	uint	tr511;		/* 0x2468c - Transmit and Receive 256-511 byte Frame Counter */
+	uint	tr1k;		/* 0x24690 - Transmit and Receive 512-1023 byte Frame Counter */
+	uint	trmax;		/* 0x24694 - Transmit and Receive 1024-1518 byte Frame Counter */
+	uint	trmgv;		/* 0x24698 - Transmit and Receive 1519-1522 byte Good VLAN Frame */
+	uint	rbyt;		/* 0x2469c - Receive Byte Counter */
+	uint	rpkt;		/* 0x246a0 - Receive Packet Counter */
+	uint	rfcs;		/* 0x246a4 - Receive FCS Error Counter */
+	uint	rmca;		/* 0x246a8 - Receive Multicast Packet Counter */
+	uint	rbca;		/* 0x246ac - Receive Broadcast Packet Counter */
+	uint	rxcf;		/* 0x246b0 - Receive Control Frame Packet Counter */
+	uint	rxpf;		/* 0x246b4 - Receive Pause Frame Packet Counter */
+	uint	rxuo;		/* 0x246b8 - Receive Unknown OP Code Counter */
+	uint	raln;		/* 0x246bc - Receive Alignment Error Counter */
+	uint	rflr;		/* 0x246c0 - Receive Frame Length Error Counter */
+	uint	rcde;		/* 0x246c4 - Receive Code Error Counter */
+	uint	rcse;		/* 0x246c8 - Receive Carrier Sense Error Counter */
+	uint	rund;		/* 0x246cc - Receive Undersize Packet Counter */
+	uint	rovr;		/* 0x246d0 - Receive Oversize Packet Counter */
+	uint	rfrg;		/* 0x246d4 - Receive Fragments Counter */
+	uint	rjbr;		/* 0x246d8 - Receive Jabber Counter */
+	uint	rdrp;		/* 0x246dc - Receive Drop Counter */
+	uint	tbyt;		/* 0x246e0 - Transmit Byte Counter Counter */
+	uint	tpkt;		/* 0x246e4 - Transmit Packet Counter */
+	uint	tmca;		/* 0x246e8 - Transmit Multicast Packet Counter */
+	uint	tbca;		/* 0x246ec - Transmit Broadcast Packet Counter */
+	uint	txpf;		/* 0x246f0 - Transmit Pause Control Frame Counter */
+	uint	tdfr;		/* 0x246f4 - Transmit Deferral Packet Counter */
+	uint	tedf;		/* 0x246f8 - Transmit Excessive Deferral Packet Counter */
+	uint	tscl;		/* 0x246fc - Transmit Single Collision Packet Counter */
+	uint	tmcl;		/* 0x24700 - Transmit Multiple Collision Packet Counter */
+	uint	tlcl;		/* 0x24704 - Transmit Late Collision Packet Counter */
+	uint	txcl;		/* 0x24708 - Transmit Excessive Collision Packet Counter */
+	uint	tncl;		/* 0x2470c - Transmit Total Collision Counter */
+	char	res49[4];
+	uint	tdrp;		/* 0x24714 - Transmit Drop Frame Counter */
+	uint	tjbr;		/* 0x24718 - Transmit Jabber Frame Counter */
+	uint	tfcs;		/* 0x2471c - Transmit FCS Error Counter */
+	uint	txcf;		/* 0x24720 - Transmit Control Frame Counter */
+	uint	tovr;		/* 0x24724 - Transmit Oversize Frame Counter */
+	uint	tund;		/* 0x24728 - Transmit Undersize Frame Counter */
+	uint	tfrg;		/* 0x2472c - Transmit Fragments Frame Counter */
+	uint	car1;		/* 0x24730 - Carry Register One */
+	uint	car2;		/* 0x24734 - Carry Register Two */
+	uint	cam1;		/* 0x24738 - Carry Mask Register One */
+	uint	cam2;		/* 0x2473c - Carry Mask Register Two */
+	uint    rrej;	        /* 0x24740 - Receive filer rejected packet counter */
+	char	res50[188];
+	uint	iaddr0;		/* 0x24800 - Indivdual address register 0 */
+	uint	iaddr1;		/* 0x24804 - Indivdual address register 1 */
+	uint	iaddr2;		/* 0x24808 - Indivdual address register 2 */
+	uint	iaddr3;		/* 0x2480c - Indivdual address register 3 */
+	uint	iaddr4;		/* 0x24810 - Indivdual address register 4 */
+	uint	iaddr5;		/* 0x24814 - Indivdual address register 5 */
+	uint	iaddr6;		/* 0x24818 - Indivdual address register 6 */
+	uint	iaddr7;		/* 0x2481c - Indivdual address register 7 */
+	char	res51[96];
+	uint	gaddr0;		/* 0x24880 - Global address register 0 */
+	uint	gaddr1;		/* 0x24884 - Global address register 1 */
+	uint	gaddr2;		/* 0x24888 - Global address register 2 */
+	uint	gaddr3;		/* 0x2488c - Global address register 3 */
+	uint	gaddr4;		/* 0x24890 - Global address register 4 */
+	uint	gaddr5;		/* 0x24894 - Global address register 5 */
+	uint	gaddr6;		/* 0x24898 - Global address register 6 */
+	uint	gaddr7;		/* 0x2489c - Global address register 7 */
+	char	res52[352];
+	uint    fifocfg;        /* 0x24A00 - FIFO interface configuration register */
+	char    res53[500];
+	uint    attr;           /* 0x24BF8 - DMA Attribute register */
+	uint    attreli;        /* 0x24BFC - DMA Attribute extract length and index register */
+	char    res54[1024];
+} ccsr_tsec_t;
+
+/* PIC Registers(0x4_0000-0x6_1000) */
+
+typedef struct ccsr_pic {
+	char	res1[64];
+	uint	ipidr0;		/* 0x40040 - Interprocessor Interrupt Dispatch Register 0 */
+	char	res2[12];
+	uint	ipidr1;		/* 0x40050 - Interprocessor Interrupt Dispatch Register 1 */
+	char	res3[12];
+	uint	ipidr2;		/* 0x40060 - Interprocessor Interrupt Dispatch Register 2 */
+	char	res4[12];
+	uint	ipidr3;		/* 0x40070 - Interprocessor Interrupt Dispatch Register 3 */
+	char	res5[12];
+	uint	ctpr;		/* 0x40080 - Current Task Priority Register */
+	char	res6[12];
+	uint	whoami;		/* 0x40090 - Who Am I Register */
+	char	res7[12];
+	uint	iack;		/* 0x400a0 - Interrupt Acknowledge Register */
+	char	res8[12];
+	uint	eoi;		/* 0x400b0 - End Of Interrupt Register */
+	char	res9[3916];
+	uint	frr;		/* 0x41000 - Feature Reporting Register */
+	char	res10[28];
+	uint	gcr;		/* 0x41020 - Global Configuration Register */
+	char	res11[92];
+	uint	vir;		/* 0x41080 - Vendor Identification Register */
+	char	res12[12];
+	uint	pir;		/* 0x41090 - Processor Initialization Register */
+	char	res13[12];
+	uint	ipivpr0;	/* 0x410a0 - IPI Vector/Priority Register 0 */
+	char	res14[12];
+	uint	ipivpr1;	/* 0x410b0 - IPI Vector/Priority Register 1 */
+	char	res15[12];
+	uint	ipivpr2;	/* 0x410c0 - IPI Vector/Priority Register 2 */
+	char	res16[12];
+	uint	ipivpr3;	/* 0x410d0 - IPI Vector/Priority Register 3 */
+	char	res17[12];
+	uint	svr;		/* 0x410e0 - Spurious Vector Register */
+	char	res18[12];
+	uint	tfrr;		/* 0x410f0 - Timer Frequency Reporting Register */
+	char	res19[12];
+	uint	gtccr0;		/* 0x41100 - Global Timer Current Count Register 0 */
+	char	res20[12];
+	uint	gtbcr0;		/* 0x41110 - Global Timer Base Count Register 0 */
+	char	res21[12];
+	uint	gtvpr0;		/* 0x41120 - Global Timer Vector/Priority Register 0 */
+	char	res22[12];
+	uint	gtdr0;		/* 0x41130 - Global Timer Destination Register 0 */
+	char	res23[12];
+	uint	gtccr1;		/* 0x41140 - Global Timer Current Count Register 1 */
+	char	res24[12];
+	uint	gtbcr1;		/* 0x41150 - Global Timer Base Count Register 1 */
+	char	res25[12];
+	uint	gtvpr1;		/* 0x41160 - Global Timer Vector/Priority Register 1 */
+	char	res26[12];
+	uint	gtdr1;		/* 0x41170 - Global Timer Destination Register 1 */
+	char	res27[12];
+	uint	gtccr2;		/* 0x41180 - Global Timer Current Count Register 2 */
+	char	res28[12];
+	uint	gtbcr2;		/* 0x41190 - Global Timer Base Count Register 2 */
+	char	res29[12];
+	uint	gtvpr2;		/* 0x411a0 - Global Timer Vector/Priority Register 2 */
+	char	res30[12];
+	uint	gtdr2;		/* 0x411b0 - Global Timer Destination Register 2 */
+	char	res31[12];
+	uint	gtccr3;		/* 0x411c0 - Global Timer Current Count Register 3 */
+	char	res32[12];
+	uint	gtbcr3;		/* 0x411d0 - Global Timer Base Count Register 3 */
+	char	res33[12];
+	uint	gtvpr3;		/* 0x411e0 - Global Timer Vector/Priority Register 3 */
+	char	res34[12];
+	uint	gtdr3;		/* 0x411f0 - Global Timer Destination Register 3 */
+	char	res35[268];
+	uint	tcr;		/* 0x41300 - Timer Control Register */
+	char	res36[12];
+	uint	irqsr0;		/* 0x41310 - IRQ_OUT Summary Register 0 */
+	char	res37[12];
+	uint	irqsr1;		/* 0x41320 - IRQ_OUT Summary Register 1 */
+	char	res38[12];
+	uint	cisr0;		/* 0x41330 - Critical Interrupt Summary Register 0 */
+	char	res39[12];
+	uint	cisr1;		/* 0x41340 - Critical Interrupt Summary Register 1 */
+	char	res40[12];
+	uint	pm0mr0;		/* 0x41350 - Performance monitor 0 mask register 0  */
+	char	res41[12];
+	uint	pm0mr1;		/* 0x41360 - Performance monitor 0 mask register 1  */
+	char	res42[12];
+	uint	pm1mr0;		/* 0x41370 - Performance monitor 1 mask register 0  */
+	char	res43[12];
+	uint	pm1mr1;		/* 0x41380 - Performance monitor 1 mask register 1  */
+	char	res44[12];
+	uint	pm2mr0;		/* 0x41390 - Performance monitor 2 mask register 0  */
+	char	res45[12];
+	uint	pm2mr1;		/* 0x413A0 - Performance monitor 2 mask register 1  */
+	char	res46[12];
+	uint	pm3mr0;		/* 0x413B0 - Performance monitor 3 mask register 0  */
+	char	res47[12];
+	uint	pm3mr1;		/* 0x413C0 - Performance monitor 3 mask register 1  */
+	char	res48[60];
+	uint	msgr0;		/* 0x41400 - Message Register 0 */
+	char	res49[12];
+	uint	msgr1;		/* 0x41410 - Message Register 1 */
+	char	res50[12];
+	uint	msgr2;		/* 0x41420 - Message Register 2 */
+	char	res51[12];
+	uint	msgr3;		/* 0x41430 - Message Register 3 */
+	char	res52[204];
+	uint	mer;		/* 0x41500 - Message Enable Register */
+	char	res53[12];
+	uint	msr;		/* 0x41510 - Message Status Register */
+	char	res54[60140];
+	uint	eivpr0;		/* 0x50000 - External Interrupt Vector/Priority Register 0 */
+	char	res55[12];
+	uint	eidr0;		/* 0x50010 - External Interrupt Destination Register 0 */
+	char	res56[12];
+	uint	eivpr1;		/* 0x50020 - External Interrupt Vector/Priority Register 1 */
+	char	res57[12];
+	uint	eidr1;		/* 0x50030 - External Interrupt Destination Register 1 */
+	char	res58[12];
+	uint	eivpr2;		/* 0x50040 - External Interrupt Vector/Priority Register 2 */
+	char	res59[12];
+	uint	eidr2;		/* 0x50050 - External Interrupt Destination Register 2 */
+	char	res60[12];
+	uint	eivpr3;		/* 0x50060 - External Interrupt Vector/Priority Register 3 */
+	char	res61[12];
+	uint	eidr3;		/* 0x50070 - External Interrupt Destination Register 3 */
+	char	res62[12];
+	uint	eivpr4;		/* 0x50080 - External Interrupt Vector/Priority Register 4 */
+	char	res63[12];
+	uint	eidr4;		/* 0x50090 - External Interrupt Destination Register 4 */
+	char	res64[12];
+	uint	eivpr5;		/* 0x500a0 - External Interrupt Vector/Priority Register 5 */
+	char	res65[12];
+	uint	eidr5;		/* 0x500b0 - External Interrupt Destination Register 5 */
+	char	res66[12];
+	uint	eivpr6;		/* 0x500c0 - External Interrupt Vector/Priority Register 6 */
+	char	res67[12];
+	uint	eidr6;		/* 0x500d0 - External Interrupt Destination Register 6 */
+	char	res68[12];
+	uint	eivpr7;		/* 0x500e0 - External Interrupt Vector/Priority Register 7 */
+	char	res69[12];
+	uint	eidr7;		/* 0x500f0 - External Interrupt Destination Register 7 */
+	char	res70[12];
+	uint	eivpr8;		/* 0x50100 - External Interrupt Vector/Priority Register 8 */
+	char	res71[12];
+	uint	eidr8;		/* 0x50110 - External Interrupt Destination Register 8 */
+	char	res72[12];
+	uint	eivpr9;		/* 0x50120 - External Interrupt Vector/Priority Register 9 */
+	char	res73[12];
+	uint	eidr9;		/* 0x50130 - External Interrupt Destination Register 9 */
+	char	res74[12];
+	uint	eivpr10;	/* 0x50140 - External Interrupt Vector/Priority Register 10 */
+	char	res75[12];
+	uint	eidr10;		/* 0x50150 - External Interrupt Destination Register 10 */
+	char	res76[12];
+	uint	eivpr11;	/* 0x50160 - External Interrupt Vector/Priority Register 11 */
+	char	res77[12];
+	uint	eidr11;		/* 0x50170 - External Interrupt Destination Register 11 */
+	char	res78[140];
+	uint	iivpr0;		/* 0x50200 - Internal Interrupt Vector/Priority Register 0 */
+	char	res79[12];
+	uint	iidr0;		/* 0x50210 - Internal Interrupt Destination Register 0 */
+	char	res80[12];
+	uint	iivpr1;		/* 0x50220 - Internal Interrupt Vector/Priority Register 1 */
+	char	res81[12];
+	uint	iidr1;		/* 0x50230 - Internal Interrupt Destination Register 1 */
+	char	res82[12];
+	uint	iivpr2;		/* 0x50240 - Internal Interrupt Vector/Priority Register 2 */
+	char	res83[12];
+	uint	iidr2;		/* 0x50250 - Internal Interrupt Destination Register 2 */
+	char	res84[12];
+	uint	iivpr3;		/* 0x50260 - Internal Interrupt Vector/Priority Register 3 */
+	char	res85[12];
+	uint	iidr3;		/* 0x50270 - Internal Interrupt Destination Register 3 */
+	char	res86[12];
+	uint	iivpr4;		/* 0x50280 - Internal Interrupt Vector/Priority Register 4 */
+	char	res87[12];
+	uint	iidr4;		/* 0x50290 - Internal Interrupt Destination Register 4 */
+	char	res88[12];
+	uint	iivpr5;		/* 0x502a0 - Internal Interrupt Vector/Priority Register 5 */
+	char	res89[12];
+	uint	iidr5;		/* 0x502b0 - Internal Interrupt Destination Register 5 */
+	char	res90[12];
+	uint	iivpr6;		/* 0x502c0 - Internal Interrupt Vector/Priority Register 6 */
+	char	res91[12];
+	uint	iidr6;		/* 0x502d0 - Internal Interrupt Destination Register 6 */
+	char	res92[12];
+	uint	iivpr7;		/* 0x502e0 - Internal Interrupt Vector/Priority Register 7 */
+	char	res93[12];
+	uint	iidr7;		/* 0x502f0 - Internal Interrupt Destination Register 7 */
+	char	res94[12];
+	uint	iivpr8;		/* 0x50300 - Internal Interrupt Vector/Priority Register 8 */
+	char	res95[12];
+	uint	iidr8;		/* 0x50310 - Internal Interrupt Destination Register 8 */
+	char	res96[12];
+	uint	iivpr9;		/* 0x50320 - Internal Interrupt Vector/Priority Register 9 */
+	char	res97[12];
+	uint	iidr9;		/* 0x50330 - Internal Interrupt Destination Register 9 */
+	char	res98[12];
+	uint	iivpr10;	/* 0x50340 - Internal Interrupt Vector/Priority Register 10 */
+	char	res99[12];
+	uint	iidr10;		/* 0x50350 - Internal Interrupt Destination Register 10 */
+	char	res100[12];
+	uint	iivpr11;	/* 0x50360 - Internal Interrupt Vector/Priority Register 11 */
+	char	res101[12];
+	uint	iidr11;		/* 0x50370 - Internal Interrupt Destination Register 11 */
+	char	res102[12];
+	uint	iivpr12;	/* 0x50380 - Internal Interrupt Vector/Priority Register 12 */
+	char	res103[12];
+	uint	iidr12;		/* 0x50390 - Internal Interrupt Destination Register 12 */
+	char	res104[12];
+	uint	iivpr13;	/* 0x503a0 - Internal Interrupt Vector/Priority Register 13 */
+	char	res105[12];
+	uint	iidr13;		/* 0x503b0 - Internal Interrupt Destination Register 13 */
+	char	res106[12];
+	uint	iivpr14;	/* 0x503c0 - Internal Interrupt Vector/Priority Register 14 */
+	char	res107[12];
+	uint	iidr14;		/* 0x503d0 - Internal Interrupt Destination Register 14 */
+	char	res108[12];
+	uint	iivpr15;	/* 0x503e0 - Internal Interrupt Vector/Priority Register 15 */
+	char	res109[12];
+	uint	iidr15;		/* 0x503f0 - Internal Interrupt Destination Register 15 */
+	char	res110[12];
+	uint	iivpr16;	/* 0x50400 - Internal Interrupt Vector/Priority Register 16 */
+	char	res111[12];
+	uint	iidr16;		/* 0x50410 - Internal Interrupt Destination Register 16 */
+	char	res112[12];
+	uint	iivpr17;	/* 0x50420 - Internal Interrupt Vector/Priority Register 17 */
+	char	res113[12];
+	uint	iidr17;		/* 0x50430 - Internal Interrupt Destination Register 17 */
+	char	res114[12];
+	uint	iivpr18;	/* 0x50440 - Internal Interrupt Vector/Priority Register 18 */
+	char	res115[12];
+	uint	iidr18;		/* 0x50450 - Internal Interrupt Destination Register 18 */
+	char	res116[12];
+	uint	iivpr19;	/* 0x50460 - Internal Interrupt Vector/Priority Register 19 */
+	char	res117[12];
+	uint	iidr19;		/* 0x50470 - Internal Interrupt Destination Register 19 */
+	char	res118[12];
+	uint	iivpr20;	/* 0x50480 - Internal Interrupt Vector/Priority Register 20 */
+	char	res119[12];
+	uint	iidr20;		/* 0x50490 - Internal Interrupt Destination Register 20 */
+	char	res120[12];
+	uint	iivpr21;	/* 0x504a0 - Internal Interrupt Vector/Priority Register 21 */
+	char	res121[12];
+	uint	iidr21;		/* 0x504b0 - Internal Interrupt Destination Register 21 */
+	char	res122[12];
+	uint	iivpr22;	/* 0x504c0 - Internal Interrupt Vector/Priority Register 22 */
+	char	res123[12];
+	uint	iidr22;		/* 0x504d0 - Internal Interrupt Destination Register 22 */
+	char	res124[12];
+	uint	iivpr23;	/* 0x504e0 - Internal Interrupt Vector/Priority Register 23 */
+	char	res125[12];
+	uint	iidr23;		/* 0x504f0 - Internal Interrupt Destination Register 23 */
+	char	res126[12];
+	uint	iivpr24;	/* 0x50500 - Internal Interrupt Vector/Priority Register 24 */
+	char	res127[12];
+	uint	iidr24;		/* 0x50510 - Internal Interrupt Destination Register 24 */
+	char	res128[12];
+	uint	iivpr25;	/* 0x50520 - Internal Interrupt Vector/Priority Register 25 */
+	char	res129[12];
+	uint	iidr25;		/* 0x50530 - Internal Interrupt Destination Register 25 */
+	char	res130[12];
+	uint	iivpr26;	/* 0x50540 - Internal Interrupt Vector/Priority Register 26 */
+	char	res131[12];
+	uint	iidr26;		/* 0x50550 - Internal Interrupt Destination Register 26 */
+	char	res132[12];
+	uint	iivpr27;	/* 0x50560 - Internal Interrupt Vector/Priority Register 27 */
+	char	res133[12];
+	uint	iidr27;		/* 0x50570 - Internal Interrupt Destination Register 27 */
+	char	res134[12];
+	uint	iivpr28;	/* 0x50580 - Internal Interrupt Vector/Priority Register 28 */
+	char	res135[12];
+	uint	iidr28;		/* 0x50590 - Internal Interrupt Destination Register 28 */
+	char	res136[12];
+	uint	iivpr29;	/* 0x505a0 - Internal Interrupt Vector/Priority Register 29 */
+	char	res137[12];
+	uint	iidr29;		/* 0x505b0 - Internal Interrupt Destination Register 29 */
+	char	res138[12];
+	uint	iivpr30;	/* 0x505c0 - Internal Interrupt Vector/Priority Register 30 */
+	char	res139[12];
+	uint	iidr30;		/* 0x505d0 - Internal Interrupt Destination Register 30 */
+	char	res140[12];
+	uint	iivpr31;	/* 0x505e0 - Internal Interrupt Vector/Priority Register 31 */
+	char	res141[12];
+	uint	iidr31;		/* 0x505f0 - Internal Interrupt Destination Register 31 */
+	char	res142[4108];
+	uint	mivpr0;		/* 0x51600 - Messaging Interrupt Vector/Priority Register 0 */
+	char	res143[12];
+	uint	midr0;		/* 0x51610 - Messaging Interrupt Destination Register 0 */
+	char	res144[12];
+	uint	mivpr1;		/* 0x51620 - Messaging Interrupt Vector/Priority Register 1 */
+	char	res145[12];
+	uint	midr1;		/* 0x51630 - Messaging Interrupt Destination Register 1 */
+	char	res146[12];
+	uint	mivpr2;		/* 0x51640 - Messaging Interrupt Vector/Priority Register 2 */
+	char	res147[12];
+	uint	midr2;		/* 0x51650 - Messaging Interrupt Destination Register 2 */
+	char	res148[12];
+	uint	mivpr3;		/* 0x51660 - Messaging Interrupt Vector/Priority Register 3 */
+	char	res149[12];
+	uint	midr3;		/* 0x51670 - Messaging Interrupt Destination Register 3 */
+	char	res150[59852];
+	uint	ipi0dr0;	/* 0x60040 - Processor 0 Interprocessor Interrupt Dispatch Register 0 */
+	char	res151[12];
+	uint	ipi0dr1;	/* 0x60050 - Processor 0 Interprocessor Interrupt Dispatch Register 1 */
+	char	res152[12];
+	uint	ipi0dr2;	/* 0x60060 - Processor 0 Interprocessor Interrupt Dispatch Register 2 */
+	char	res153[12];
+	uint	ipi0dr3;	/* 0x60070 - Processor 0 Interprocessor Interrupt Dispatch Register 3 */
+	char	res154[12];
+	uint	ctpr0;		/* 0x60080 - Current Task Priority Register for Processor 0 */
+	char	res155[12];
+	uint	whoami0;	/* 0x60090 - Who Am I Register for Processor 0 */
+	char	res156[12];
+	uint	iack0;		/* 0x600a0 - Interrupt Acknowledge Register for Processor 0 */
+	char	res157[12];
+	uint	eoi0;		/* 0x600b0 - End Of Interrupt Register for Processor 0 */
+	char	res158[3916];
+} ccsr_pic_t;
+
+/* RapidIO Registers(0xc_0000-0xe_0000) */
+
+typedef struct ccsr_rio {
+	uint	didcar;		/* 0xc0000 - Device Identity Capability Register */
+	uint	dicar;		/* 0xc0004 - Device Information Capability Register */
+	uint	aidcar;		/* 0xc0008 - Assembly Identity Capability Register */
+	uint	aicar;		/* 0xc000c - Assembly Information Capability Register */
+	uint	pefcar;		/* 0xc0010 - Processing Element Features Capability Register */
+	uint	spicar;		/* 0xc0014 - Switch Port Information Capability Register */
+	uint	socar;		/* 0xc0018 - Source Operations Capability Register */
+	uint	docar;		/* 0xc001c - Destination Operations Capability Register */
+	char	res1[32];
+	uint	msr;		/* 0xc0040 - Mailbox Command And Status Register */
+	uint	pwdcsr;		/* 0xc0044 - Port-Write and Doorbell Command And Status Register */
+	char	res2[4];
+	uint	pellccsr;	/* 0xc004c - Processing Element Logic Layer Control Command and Status Register */
+	char	res3[12];
+	uint	lcsbacsr;	/* 0xc005c - Local Configuration Space Base Address Command and Status Register */
+	uint	bdidcsr;	/* 0xc0060 - Base Device ID Command and Status Register */
+	char	res4[4];
+	uint	hbdidlcsr;	/* 0xc0068 - Host Base Device ID Lock Command and Status Register */
+	uint	ctcsr;		/* 0xc006c - Component Tag Command and Status Register */
+	char	res5[144];
+	uint	pmbh0csr;	/* 0xc0100 - 8/16 LP-LVDS Port Maintenance Block Header 0 Command and Status Register */
+	char	res6[28];
+	uint	pltoccsr;	/* 0xc0120 - Port Link Time-out Control Command and Status Register */
+	uint	prtoccsr;	/* 0xc0124 - Port Response Time-out Control Command and Status Register */
+	char	res7[20];
+	uint	pgccsr;		/* 0xc013c - Port General Command and Status Register */
+	uint	plmreqcsr;	/* 0xc0140 - Port Link Maintenance Request Command and Status Register */
+	uint	plmrespcsr;	/* 0xc0144 - Port Link Maintenance Response Command and Status Register */
+	uint	plascsr;	/* 0xc0148 - Port Local Ackid Status Command and Status Register */
+	char	res8[12];
+	uint	pescsr;		/* 0xc0158 - Port Error and Status Command and Status Register */
+	uint	pccsr;		/* 0xc015c - Port Control Command and Status Register */
+	char	res9[1184];
+	uint	erbh;		/* 0xc0600 - Error Reporting Block Header Register */
+	char	res10[4];
+	uint	ltledcsr;	/* 0xc0608 - Logical/Transport layer error detect status register */
+	uint	ltleecsr;	/* 0xc060c - Logical/Transport layer error enable register */
+	char	res11[4];
+	uint	ltlaccsr;	/* 0xc0614 - Logical/Transport layer addresss capture register */
+	uint	ltldidccsr;	/* 0xc0618 - Logical/Transport layer device ID capture register */
+	uint	ltlcccsr;	/* 0xc061c - Logical/Transport layer control capture register */
+	char	res12[32];
+	uint	edcsr;	        /* 0xc0640 - Port 0 error detect status register */
+	uint	erecsr;	        /* 0xc0644 - Port 0 error rate enable status register */
+	uint	ecacsr;	        /* 0xc0648 - Port 0 error capture attributes register */
+	uint	pcseccsr0;	/* 0xc064c - Port 0 packet/control symbol error capture register 0 */
+	uint	peccsr1;	/* 0xc0650 - Port 0 error capture command and status register 1 */
+	uint	peccsr2;	/* 0xc0654 - Port 0 error capture command and status register 2 */
+	uint	peccsr3;	/* 0xc0658 - Port 0 error capture command and status register 3 */
+	char	res13[12];
+	uint	ercsr;	        /* 0xc0668 - Port 0 error rate command and status register */
+	uint	ertcsr;	        /* 0xc066C - Port 0 error rate threshold status register*/
+	char	res14[63892];
+	uint	llcr;		/* 0xd0004 - Logical Layer Configuration Register */
+	char	res15[12];
+	uint	epwisr;		/* 0xd0010 - Error / Port-Write Interrupt Status Register */
+	char	res16[12];
+	uint	lretcr;		/* 0xd0020 - Logical Retry Error Threshold Configuration Register */
+	char	res17[92];
+	uint	pretcr;		/* 0xd0080 - Physical Retry Erorr Threshold Configuration Register */
+	char	res18[124];
+	uint	adidcsr;	/* 0xd0100 - Port 0 Alt. Device ID Command and Status Register */
+	char	res19[28];
+	uint	ptaacr;	        /* 0xd0120 - Port 0 Pass-Through/Accept-All Configuration Register */
+	char	res20[12];
+	uint	iecsr;	        /* 0xd0130 - Port 0 Implementation Error Status Register */
+	char	res21[12];
+	uint	pcr;		/* 0xd0140 - Port 0 Phsyical Configuration RegisterRegister */
+	char	res22[20];
+	uint	slcsr;	        /* 0xd0158 - Port 0 Serial Link Command and Status Register */
+	char	res23[4];
+	uint	sleir;	        /* 0xd0160 - Port 0 Serial Link Error Injection Register */
+	char	res24[2716];
+	uint	rowtar0;	/* 0xd0c00 - RapidIO Outbound Window Translation Address Register 0 */
+	uint	rowtear0;	/* 0xd0c04 - RapidIO Outbound Window Translation Ext. Address Register 0 */
+	char	res25[8];
+	uint	rowar0;		/* 0xd0c10 - RapidIO Outbound Attributes Register 0 */
+	char	res26[12];
+	uint	rowtar1;	/* 0xd0c20 - RapidIO Outbound Window Translation Address Register 1 */
+	uint	rowtear1;	/* 0xd0c24 - RapidIO Outbound Window Translation Ext. Address Register 1 */
+	uint	rowbar1;	/* 0xd0c28 - RapidIO Outbound Window Base Address Register 1 */
+	char	res27[4];
+	uint	rowar1;		/* 0xd0c30 - RapidIO Outbound Attributes Register 1 */
+	uint	rows1r1;	/* 0xd0c34 - RapidIO Outbound Window Segment 1 Register 1 */
+	uint	rows2r1;	/* 0xd0c38 - RapidIO Outbound Window Segment 2 Register 1 */
+	uint	rows3r1;	/* 0xd0c3c - RapidIO Outbound Window Segment 3 Register 1 */
+	uint	rowtar2;	/* 0xd0c40 - RapidIO Outbound Window Translation Address Register 2 */
+	uint	rowtear2;	/* 0xd0c44 - RapidIO Outbound Window Translation Ext. Address Register 2 */
+	uint	rowbar2;	/* 0xd0c48 - RapidIO Outbound Window Base Address Register 2 */
+	char	res28[4];
+	uint	rowar2;		/* 0xd0c50 - RapidIO Outbound Attributes Register 2 */
+	uint	rows1r2;	/* 0xd0c54 - RapidIO Outbound Window Segment 1 Register 2 */
+	uint	rows2r2;	/* 0xd0c58 - RapidIO Outbound Window Segment 2 Register 2 */
+	uint	rows3r2;	/* 0xd0c5c - RapidIO Outbound Window Segment 3 Register 2 */
+	uint	rowtar3;	/* 0xd0c60 - RapidIO Outbound Window Translation Address Register 3 */
+	uint	rowtear3;	/* 0xd0c64 - RapidIO Outbound Window Translation Ext. Address Register 3 */
+	uint	rowbar3;	/* 0xd0c68 - RapidIO Outbound Window Base Address Register 3 */
+	char	res29[4];
+	uint	rowar3;		/* 0xd0c70 - RapidIO Outbound Attributes Register 3 */
+	uint	rows1r3;	/* 0xd0c74 - RapidIO Outbound Window Segment 1 Register 3 */
+	uint	rows2r3;	/* 0xd0c78 - RapidIO Outbound Window Segment 2 Register 3 */
+	uint	rows3r3;	/* 0xd0c7c - RapidIO Outbound Window Segment 3 Register 3 */
+	uint	rowtar4;	/* 0xd0c80 - RapidIO Outbound Window Translation Address Register 4 */
+	uint	rowtear4;	/* 0xd0c84 - RapidIO Outbound Window Translation Ext. Address Register 4 */
+	uint	rowbar4;	/* 0xd0c88 - RapidIO Outbound Window Base Address Register 4 */
+	char	res30[4];
+	uint	rowar4;		/* 0xd0c90 - RapidIO Outbound Attributes Register 4 */
+	uint	rows1r4;	/* 0xd0c94 - RapidIO Outbound Window Segment 1 Register 4 */
+	uint	rows2r4;	/* 0xd0c98 - RapidIO Outbound Window Segment 2 Register 4 */
+	uint	rows3r4;	/* 0xd0c9c - RapidIO Outbound Window Segment 3 Register 4 */
+	uint	rowtar5;	/* 0xd0ca0 - RapidIO Outbound Window Translation Address Register 5 */
+	uint	rowtear5;	/* 0xd0ca4 - RapidIO Outbound Window Translation Ext. Address Register 5 */
+	uint	rowbar5;	/* 0xd0ca8 - RapidIO Outbound Window Base Address Register 5 */
+	char	res31[4];
+	uint	rowar5;		/* 0xd0cb0 - RapidIO Outbound Attributes Register 5 */
+	uint	rows1r5;	/* 0xd0cb4 - RapidIO Outbound Window Segment 1 Register 5 */
+	uint	rows2r5;	/* 0xd0cb8 - RapidIO Outbound Window Segment 2 Register 5 */
+	uint	rows3r5;	/* 0xd0cbc - RapidIO Outbound Window Segment 3 Register 5 */
+	uint	rowtar6;	/* 0xd0cc0 - RapidIO Outbound Window Translation Address Register 6 */
+	uint	rowtear6;	/* 0xd0cc4 - RapidIO Outbound Window Translation Ext. Address Register 6 */
+	uint	rowbar6;	/* 0xd0cc8 - RapidIO Outbound Window Base Address Register 6 */
+	char	res32[4];
+	uint	rowar6;		/* 0xd0cd0 - RapidIO Outbound Attributes Register 6 */
+	uint	rows1r6;	/* 0xd0cd4 - RapidIO Outbound Window Segment 1 Register 6 */
+	uint	rows2r6;	/* 0xd0cd8 - RapidIO Outbound Window Segment 2 Register 6 */
+	uint	rows3r6;	/* 0xd0cdc - RapidIO Outbound Window Segment 3 Register 6 */
+	uint	rowtar7;	/* 0xd0ce0 - RapidIO Outbound Window Translation Address Register 7 */
+	uint	rowtear7;	/* 0xd0ce4 - RapidIO Outbound Window Translation Ext. Address Register 7 */
+	uint	rowbar7;	/* 0xd0ce8 - RapidIO Outbound Window Base Address Register 7 */
+	char	res33[4];
+	uint	rowar7;		/* 0xd0cf0 - RapidIO Outbound Attributes Register 7 */
+	uint	rows1r7;	/* 0xd0cf4 - RapidIO Outbound Window Segment 1 Register 7 */
+	uint	rows2r7;	/* 0xd0cf8 - RapidIO Outbound Window Segment 2 Register 7 */
+	uint	rows3r7;	/* 0xd0cfc - RapidIO Outbound Window Segment 3 Register 7 */
+	uint	rowtar8;	/* 0xd0d00 - RapidIO Outbound Window Translation Address Register 8 */
+	uint	rowtear8;	/* 0xd0d04 - RapidIO Outbound Window Translation Ext. Address Register 8 */
+	uint	rowbar8;	/* 0xd0d08 - RapidIO Outbound Window Base Address Register 8 */
+	char	res34[4];
+	uint	rowar8;		/* 0xd0d10 - RapidIO Outbound Attributes Register 8 */
+	uint	rows1r8;	/* 0xd0d14 - RapidIO Outbound Window Segment 1 Register 8 */
+	uint	rows2r8;	/* 0xd0d18 - RapidIO Outbound Window Segment 2 Register 8 */
+	uint	rows3r8;	/* 0xd0d1c - RapidIO Outbound Window Segment 3 Register 8 */
+	char	res35[64];
+	uint	riwtar4;	/* 0xd0d60 - RapidIO Inbound Window Translation Address Register 4 */
+	uint	riwbar4;	/* 0xd0d68 - RapidIO Inbound Window Base Address Register 4 */
+	char	res36[4];
+	uint	riwar4;		/* 0xd0d70 - RapidIO Inbound Attributes Register 4 */
+	char	res37[12];
+	uint	riwtar3;	/* 0xd0d80 - RapidIO Inbound Window Translation Address Register 3 */
+	char	res38[4];
+	uint	riwbar3;	/* 0xd0d88 - RapidIO Inbound Window Base Address Register 3 */
+	char	res39[4];
+	uint	riwar3;		/* 0xd0d90 - RapidIO Inbound Attributes Register 3 */
+	char	res40[12];
+	uint	riwtar2;	/* 0xd0da0 - RapidIO Inbound Window Translation Address Register 2 */
+	char	res41[4];
+	uint	riwbar2;	/* 0xd0da8 - RapidIO Inbound Window Base Address Register 2 */
+	char	res42[4];
+	uint	riwar2;		/* 0xd0db0 - RapidIO Inbound Attributes Register 2 */
+	char	res43[12];
+	uint	riwtar1;	/* 0xd0dc0 - RapidIO Inbound Window Translation Address Register 1 */
+	char	res44[4];
+	uint	riwbar1;	/* 0xd0dc8 - RapidIO Inbound Window Base Address Register 1 */
+	char	res45[4];
+	uint	riwar1;		/* 0xd0dd0 - RapidIO Inbound Attributes Register 1 */
+	char	res46[12];
+	uint	riwtar0;	/* 0xd0de0 - RapidIO Inbound Window Translation Address Register 0 */
+	char	res47[12];
+	uint	riwar0;		/* 0xd0df0 - RapidIO Inbound Attributes Register 0 */
+	char	res48[12];
+	uint	pnfedr;		/* 0xd0e00 - Port Notification/Fatal Error Detect Register */
+	uint	pnfedir;	/* 0xd0e04 - Port Notification/Fatal Error Detect Register */
+	uint	pnfeier;	/* 0xd0e08 - Port Notification/Fatal Error Interrupt Enable Register */
+	uint	pecr;		/* 0xd0e0c - Port Error Control Register */
+	uint	pepcsr0;	/* 0xd0e10 - Port Error Packet/Control Symbol Register 0 */
+	uint	pepr1;		/* 0xd0e14 - Port Error Packet Register 1 */
+	uint	pepr2;		/* 0xd0e18 - Port Error Packet Register 2 */
+	char	res49[4];
+	uint	predr;		/* 0xd0e20 - Port Recoverable Error Detect Register */
+	char	res50[4];
+	uint	pertr;		/* 0xd0e28 - Port Error Recovery Threshold Register */
+	uint	prtr;		/* 0xd0e2c - Port Retry Threshold Register */
+	char	res51[8656];
+	uint	omr;		/* 0xd3000 - Outbound Mode Register */
+	uint	osr;		/* 0xd3004 - Outbound Status Register */
+	uint	eodqtpar;	/* 0xd3008 - Extended Outbound Descriptor Queue Tail Pointer Address Register */
+	uint	odqtpar;	/* 0xd300c - Outbound Descriptor Queue Tail Pointer Address Register */
+	uint	eosar;		/* 0xd3010 - Extended Outbound Unit Source Address Register */
+	uint	osar;		/* 0xd3014 - Outbound Unit Source Address Register */
+	uint	odpr;		/* 0xd3018 - Outbound Destination Port Register */
+	uint	odatr;		/* 0xd301c - Outbound Destination Attributes Register */
+	uint	odcr;		/* 0xd3020 - Outbound Doubleword Count Register */
+	uint	eodqhpar;	/* 0xd3024 - Extended Outbound Descriptor Queue Head Pointer Address Register */
+	uint	odqhpar;	/* 0xd3028 - Outbound Descriptor Queue Head Pointer Address Register */
+	uint	oretr;	        /* 0xd302C - Outbound Retry Error Threshold Register */
+	uint	omgr;	        /* 0xd3030 - Outbound Multicast Group Register */
+	uint	omlr;	        /* 0xd3034 - Outbound Multicast List Register */
+	char	res52[40];
+	uint	imr;		/* 0xd3060 - Outbound Mode Register */
+	uint	isr;		/* 0xd3064 - Inbound Status Register */
+	uint	eidqtpar;	/* 0xd3068 - Extended Inbound Descriptor Queue Tail Pointer Address Register */
+	uint	idqtpar;	/* 0xd306c - Inbound Descriptor Queue Tail Pointer Address Register */
+	uint	eifqhpar;	/* 0xd3070 - Extended Inbound Frame Queue Head Pointer Address Register */
+	uint	ifqhpar;	/* 0xd3074 - Inbound Frame Queue Head Pointer Address Register */
+	uint	imirir;	        /* 0xd3078 - Inbound Maximum Interrutp Report Interval Register */
+	char	res53[900];
+	uint	oddmr;		/* 0xd3400 - Outbound Doorbell Mode Register */
+	uint	oddsr;		/* 0xd3404 - Outbound Doorbell Status Register */
+	char	res54[16];
+	uint	oddpr;		/* 0xd3418 - Outbound Doorbell Destination Port Register */
+	uint	oddatr;		/* 0xd341C - Outbound Doorbell Destination Attributes Register */
+	char	res55[12];
+	uint	oddretr;	/* 0xd342C - Outbound Doorbell Retry Threshold Configuration Register */
+	char	res56[48];
+	uint	idmr;		/* 0xd3460 - Inbound Doorbell Mode Register */
+	uint	idsr;		/* 0xd3464 - Inbound Doorbell Status Register */
+	uint	iedqtpar;	/* 0xd3468 - Extended Inbound Doorbell Queue Tail Pointer Address Register */
+	uint	iqtpar;	        /* 0xd346c - Inbound Doorbell Queue Tail Pointer Address Register */
+	uint	iedqhpar;	/* 0xd3470 - Extended Inbound Doorbell Queue Head Pointer Address Register */
+	uint	idqhpar;	/* 0xd3474 - Inbound Doorbell Queue Head Pointer Address Register */
+	uint	idmirir;	/* 0xd3478 - Inbound Doorbell Max Interrupt Report Interval Register */
+	char	res57[100];
+	uint	pwmr;		/* 0xd34e0 - Port-Write Mode Register */
+	uint	pwsr;		/* 0xd34e4 - Port-Write Status Register */
+	uint	epwqbar;	/* 0xd34e8 - Extended Port-Write Queue Base Address Register */
+	uint	pwqbar;		/* 0xd34ec - Port-Write Queue Base Address Register */
+	char	res58[51984];
+} ccsr_rio_t;
+
+/* Global Utilities Register Block(0xe_0000-0xf_ffff) */
+typedef struct ccsr_gur {
+	uint	porpllsr;	/* 0xe0000 - POR PLL ratio status register */
+	uint	porbmsr;	/* 0xe0004 - POR boot mode status register */
+#define MPC86xx_PORBMSR_HA      0x00060000
+	uint	porimpscr;	/* 0xe0008 - POR I/O impedance status and control register */
+	uint	pordevsr;	/* 0xe000c - POR I/O device status regsiter */
+#define MPC86xx_PORDEVSR_IO_SEL 0x000F0000
+	uint	pordbgmsr;	/* 0xe0010 - POR debug mode status register */
+	char	res1[12];
+	uint	gpporcr;	/* 0xe0020 - General-purpose POR configuration register */
+	char	res2[12];
+	uint	gpiocr;		/* 0xe0030 - GPIO control register */
+	char	res3[12];
+	uint	gpoutdr;	/* 0xe0040 - General-purpose output data register */
+	char	res4[12];
+	uint	gpindr;		/* 0xe0050 - General-purpose input data register */
+	char	res5[12];
+	uint	pmuxcr;		/* 0xe0060 - Alternate function signal multiplex control */
+	char	res6[12];
+	uint	devdisr;	/* 0xe0070 - Device disable control */
+#define MPC86xx_DEVDISR_PCIEX1  0x80000000
+#define MPC86xx_DEVDISR_PCIEX2  0x40000000
+	char	res7[12];
+	uint	powmgtcsr;	/* 0xe0080 - Power management status and control register */
+	char	res8[12];
+	uint	mcpsumr;	/* 0xe0090 - Machine check summary register */
+	char	res9[12];
+	uint	pvr;		/* 0xe00a0 - Processor version register */
+	uint	svr;		/* 0xe00a4 - System version register */
+	char	res10[3416];
+	uint	clkocr;		/* 0xe0e00 - Clock out select register */
+	char	res11[12];
+	uint	ddrdllcr;	/* 0xe0e10 - DDR DLL control register */
+	char	res12[12];
+	uint	lbcdllcr;	/* 0xe0e20 - LBC DLL control register */
+	int	res13[57];
+	uint    lynxdcr1;        /* 0xe0f08 - Lynx debug control register 1*/
+	int     res14[6];
+	uint    ddrioovcr;      /* 0xe0f24 - DDR IO Overdrive Control register */
+	char	res15[61656];
+} ccsr_gur_t;
+
+typedef struct immap {
+	ccsr_local_mcm_t	im_local_mcm;
+	ccsr_ddr_t		im_ddr1;
+	ccsr_i2c_t		im_i2c;
+	ccsr_duart_t		im_duart;
+	ccsr_lbc_t		im_lbc;
+	ccsr_ddr_t		im_ddr2;
+	char                    res1[4096];
+	ccsr_pex_t		im_pex1;
+	ccsr_pex_t		im_pex2;
+	ccsr_ht_t               im_ht;
+	char                    res2[90112];
+	ccsr_dma_t		im_dma;
+	char                    res3[8192];
+	ccsr_tsec_t		im_tsec1;
+	ccsr_tsec_t		im_tsec2;
+	ccsr_tsec_t             im_tsec3;
+	ccsr_tsec_t             im_tsec4;
+	char                    res4[98304];
+	ccsr_pic_t		im_pic;
+	char                    res5[389120];
+	ccsr_rio_t		im_rio;
+	ccsr_gur_t		im_gur;
+} immap_t;
+
+extern immap_t  *immr;
+
+#endif /*__IMMAP_86xx__*/
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index baaf6f7..914f28b 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -117,8 +117,8 @@
  */
 
 typedef struct _pte {
-   	unsigned long page_num:20;
-   	unsigned long flags:12;		/* Page flags (some unused bits) */
+	unsigned long page_num:20;
+	unsigned long flags:12;		/* Page flags (some unused bits) */
 } pte;
 
 #define PD_SHIFT (10+12)		/* Page directory */
@@ -434,9 +434,14 @@
 #define BOOKE_PAGESZ_1GB        10
 #define BOOKE_PAGESZ_4GB        11
 
+#if defined(CONFIG_MPC86xx)
+#define LAWBAR_BASE_ADDR	0x00FFFFFF
+#define LAWAR_TRGT_IF		0x01F00000
+#else
 #define LAWBAR_BASE_ADDR	0x000FFFFF
-#define LAWAR_EN		0x80000000
 #define LAWAR_TRGT_IF		0x00F00000
+#endif
+#define LAWAR_EN		0x80000000
 #define LAWAR_SIZE		0x0000003F
 
 #define LAWAR_TRGT_IF_PCI	0x00000000
@@ -445,8 +450,11 @@
 #define LAWAR_TRGT_IF_PCI2	0x00100000
 #define LAWAR_TRGT_IF_LBC	0x00400000
 #define LAWAR_TRGT_IF_CCSR	0x00800000
+#define LAWAR_TRGT_IF_DDR_INTERLEAVED 0x00B00000
 #define LAWAR_TRGT_IF_RIO	0x00c00000
 #define LAWAR_TRGT_IF_DDR	0x00f00000
+#define LAWAR_TRGT_IF_DDR1	0x00f00000
+#define LAWAR_TRGT_IF_DDR2	0x01600000
 
 #define LAWAR_SIZE_BASE		0xa
 #define LAWAR_SIZE_4K		(LAWAR_SIZE_BASE+1)
@@ -469,6 +477,10 @@
 #define LAWAR_SIZE_512M		(LAWAR_SIZE_BASE+18)
 #define LAWAR_SIZE_1G		(LAWAR_SIZE_BASE+19)
 #define LAWAR_SIZE_2G		(LAWAR_SIZE_BASE+20)
+#define LAWAR_SIZE_4G		(LAWAR_SIZE_BASE+21)
+#define LAWAR_SIZE_8G		(LAWAR_SIZE_BASE+22)
+#define LAWAR_SIZE_16G		(LAWAR_SIZE_BASE+23)
+#define LAWAR_SIZE_32G		(LAWAR_SIZE_BASE+24)
 
 #ifdef CONFIG_440SPE
 /*----------------------------------------------------------------------------+
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index bbd3497..388dea4 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -264,6 +264,7 @@
 #define SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
 #define SPRN_IMISS	0x3D4	/* Instruction TLB Miss Register */
 #define SPRN_IMMR	0x27E  	/* Internal Memory Map Register */
+#define SPRN_LDSTCR	0x3F8   /* Load/Store Control Register */
 #define SPRN_L2CR	0x3F9	/* Level 2 Cache Control Regsiter */
 #define SPRN_LR		0x008	/* Link Register */
 #define SPRN_MBAR       0x137   /* System memory base address */
@@ -443,6 +444,11 @@
 #define SPRN_MCSR	0x23c	/* Machine Check Syndrome register */
 #define ESR_ST          0x00800000      /* Store Operation */
 
+#if defined(CONFIG_MPC86xx)
+#define SPRN_MSSCRO	0x3f6
+#endif
+
+
 /* Short-hand versions for a number of the above SPRNs */
 
 #define CTR	SPRN_CTR	/* Counter Register */
@@ -501,10 +507,14 @@
 #define ICMP	SPRN_ICMP	/* Instruction TLB Compare Register */
 #define IMISS	SPRN_IMISS	/* Instruction TLB Miss Register */
 #define IMMR	SPRN_IMMR      	/* PPC 860/821 Internal Memory Map Register */
+#define LDSTCR	SPRN_LDSTCR     /* Load/Store Control Register */
 #define L2CR	SPRN_L2CR    	/* PPC 750 L2 control register */
 #define LR	SPRN_LR
 #define MBAR    SPRN_MBAR       /* System memory base address */
-#if defined(CONFIG_E500)
+#if defined(CONFIG_MPC86xx)
+#define MSSCR0	SPRN_MSSCRO
+#endif
+#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
 #define PIR	SPRN_PIR
 #endif
 #define SVR	SPRN_SVR	/* System-On-Chip Version Register */
@@ -538,7 +548,7 @@
 #define CSRR0	SPRN_CSRR0
 #define CSRR1	SPRN_CSRR1
 #define IVPR	SPRN_IVPR
-#define USPRG0	SPRN_USPRG0
+#define USPRG0	SPRN_USPRG
 #define SPRG4R	SPRN_SPRG4R
 #define SPRG5R	SPRN_SPRG5R
 #define SPRG6R	SPRN_SPRG6R
@@ -763,6 +773,8 @@
 #define PVR_85xx_REV1	(PVR_85xx | 0x0010)
 #define PVR_85xx_REV2	(PVR_85xx | 0x0020)
 
+#define PVR_86xx	0x80040000
+#define PVR_86xx_REV1	(PVR_86xx | 0x0010)
 
 /*
  * For the 8xx processors, all of them report the same PVR family for
@@ -798,6 +810,8 @@
 #define SVR_VER(svr)	(((svr) >>  16) & 0xFFFF)	/* Version field */
 #define SVR_REV(svr)	(((svr) >>   0) & 0xFFFF)	/* Revison field */
 
+#define SVR_SUBVER(svr)	(((svr) >>  8) & 0xFF)	/* Process/MFG sub-version */
+
 #define SVR_FAM(svr)	(((svr) >> 20) & 0xFFF)	/* Family field */
 #define SVR_MEM(svr)	(((svr) >> 16) & 0xF)	/* Member field */
 
@@ -815,6 +829,7 @@
 #define SVR_8541	0x807A
 #define SVR_8548	0x8031
 #define SVR_8548_E	0x8039
+#define SVR_8641	0x8090
 
 
 /* I am just adding a single entry for 8260 boards.  I think we may be
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 794a6d4..30b44e3 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -45,7 +45,7 @@
 	unsigned long	bi_sramstart;	/* start of SRAM memory */
 	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
 #if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \
-	|| defined(CONFIG_E500)
+	|| defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
 	unsigned long	bi_immr_base;	/* base of IMMR register */
 #endif
 #if defined(CONFIG_MPC5xxx)
diff --git a/include/common.h b/include/common.h
index a873fa9..349d5cf 100644
--- a/include/common.h
+++ b/include/common.h
@@ -79,6 +79,10 @@
 #endif
 #include <asm/immap_8260.h>
 #endif
+#ifdef CONFIG_MPC86xx
+#include <mpc86xx.h>
+#include <asm/immap_86xx.h>
+#endif
 #ifdef CONFIG_MPC85xx
 #include <mpc85xx.h>
 #include <asm/immap_85xx.h>
@@ -200,6 +204,9 @@
 char *	strmhz(char *buf, long hz);
 int	last_stage_init(void);
 extern ulong monitor_flash_len;
+#ifdef CFG_ID_EEPROM
+int mac_read_from_eeprom(void);
+#endif
 
 /* common/flash.c */
 void flash_perror (int);
@@ -313,7 +320,8 @@
 
 #if defined(CONFIG_RPXCLASSIC)	|| defined(CONFIG_MBX) || \
     defined(CONFIG_IAD210)	|| defined(CONFIG_XPEDITE1K) || \
-    defined(CONFIG_METROBOX)    || defined(CONFIG_KAREF)
+    defined(CONFIG_METROBOX)    || defined(CONFIG_KAREF) || \
+    defined(CONFIG_V38B)
 void	board_get_enetaddr (uchar *addr);
 #endif
 
@@ -376,6 +384,7 @@
     defined (CONFIG_74xx)	|| \
     defined (CONFIG_MPC8220)	|| \
     defined (CONFIG_MPC85xx)	|| \
+    defined (CONFIG_MPC86xx)	|| \
     defined (CONFIG_MPC83XX)
 unsigned char	in8(unsigned int);
 void		out8(unsigned int, unsigned char);
@@ -464,6 +473,10 @@
 typedef MPC85xx_SYS_INFO sys_info_t;
 void	get_sys_info  ( sys_info_t * );
 #endif
+#if defined(CONFIG_MPC86xx)
+typedef MPC86xx_SYS_INFO sys_info_t;
+void   get_sys_info  ( sys_info_t * );
+#endif
 
 #if defined(CONFIG_4xx) || defined(CONFIG_IOP480)
 #  if defined(CONFIG_440)
@@ -483,7 +496,7 @@
 #if defined(CONFIG_8xx) || defined(CONFIG_8260)
 void	cpu_init_f    (volatile immap_t *immr);
 #endif
-#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2)
+#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx)
 void	cpu_init_f    (void);
 #endif
 
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 131c832..74a84f4 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -68,6 +68,10 @@
  * The board, however, can run at 66MHz.  In any event, this value
  * must match the settings of some switches.  Details can be found
  * in the README.mpc85xxads.
+ *
+ * XXX -- Can't we run at 66 MHz, anyway?  PCI should drop to
+ * 33MHz to accommodate, based on a PCI pin.
+ * Note that PCI-X won't work at 33MHz.
  */
 
 #ifndef CONFIG_SYS_CLK_FREQ
@@ -293,12 +297,31 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
-#define  CONFIG_HARD_I2C		/* I2C with hardware support*/
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8540@0"
+#define OF_SOC			"soc8540@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/soc8540@e0000000/serial@4500"
+
+#define CFG_64BIT_VSPRINTF	1
+#define CFG_64BIT_STRTOUL	1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
 
 /* RapidIO MMU */
 #define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
@@ -312,9 +335,10 @@
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0xe2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+
+#define CFG_PCI1_IO_BASE	0x0
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x100000	/* 1M */
 
 #if defined(CONFIG_PCI)
 
@@ -497,8 +521,10 @@
 #define	CONFIG_EXTRA_ENV_SETTINGS				        \
    "netdev=eth0\0"                                                      \
    "consoledev=ttyS0\0"                                                 \
-   "ramdiskaddr=400000\0"						\
-   "ramdiskfile=your.ramdisk.u-boot\0"
+   "ramdiskaddr=600000\0"						\
+   "ramdiskfile=your.ramdisk.u-boot\0"					\
+   "fdtaddr=400000\0"							\
+   "fdtfile=your.fdt.dtb\0"
 
 #define CONFIG_NFSBOOTCOMMAND	                                        \
    "setenv bootargs root=/dev/nfs rw "                                  \
@@ -506,13 +532,15 @@
       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr"
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                  \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $ramdiskaddr $ramdiskfile;"                                    \
    "tftp $loadaddr $bootfile;"                                          \
+   "tftp $fdtaddr $fdtfile;"						\
    "bootm $loadaddr $ramdiskaddr"
 
 #define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index 1af9231..418a3a3 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -179,12 +179,16 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
-#define  CONFIG_HARD_I2C		/* I2C with hardware support*/
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
 
 /* General PCI */
 #define CFG_PCI_MEM_BASE	0x80000000
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index c96b98b..db389cf 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -308,13 +308,29 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8541@0"
+#define OF_SOC			"soc8541@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/soc8541@e0000000/serial@4600"
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_EEPROM_ADDR	0x57
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
 
 /*
  * General PCI
@@ -323,32 +339,27 @@
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0xe2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x100000	/* 1M */
 
 #define CFG_PCI2_MEM_BASE	0xa0000000
 #define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
 #define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI2_IO_BASE	0xe3000000
-#define CFG_PCI2_IO_PHYS	CFG_PCI2_IO_BASE
-#define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe2100000
+#define CFG_PCI2_IO_SIZE	0x100000	/* 1M */
 
 
 #if defined(CONFIG_PCI)
 
+#define CONFIG_MPC85XX_PCI2
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
-#if !defined(CONFIG_PCI_PNP)
-    #define PCI_ENET0_IOADDR      0xe0000000
-    #define PCI_ENET0_MEMADDR     0xe0000000
-    #define PCI_IDSEL_NUMBER      0x0c 	/*slot0->3(IDSEL)=12->15*/
-#endif
-
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
@@ -482,8 +493,10 @@
 #define	CONFIG_EXTRA_ENV_SETTINGS				        \
    "netdev=eth0\0"                                                      \
    "consoledev=ttyS1\0"                                                 \
-   "ramdiskaddr=400000\0"                                               \
-   "ramdiskfile=your.ramdisk.u-boot\0"
+   "ramdiskaddr=600000\0"                                               \
+   "ramdiskfile=your.ramdisk.u-boot\0"					\
+   "fdtaddr=400000\0"							\
+   "fdtfile=your.fdt.dtb\0"
 
 #define CONFIG_NFSBOOTCOMMAND	                                        \
    "setenv bootargs root=/dev/nfs rw "                                  \
@@ -491,7 +504,8 @@
       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr"
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                  \
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 4ca8bc3..7c4849f 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -314,13 +314,29 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8548@0"
+#define OF_SOC			"soc8548@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/soc8548@e0000000/serial@4600"
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_EEPROM_ADDR	0x57
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
 
 /*
  * General PCI
@@ -329,32 +345,27 @@
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0xe2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
 
 #define CFG_PCI2_MEM_BASE	0xa0000000
 #define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
 #define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI2_IO_BASE	0xe3000000
-#define CFG_PCI2_IO_PHYS	CFG_PCI2_IO_BASE
-#define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe2100000
+#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
 
 
 #if defined(CONFIG_PCI)
 
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+#define CONFIG_85XX_PCI2
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
-#if !defined(CONFIG_PCI_PNP)
-    #define PCI_ENET0_IOADDR      0xe0000000
-    #define PCI_ENET0_MEMADDR     0xe0000000
-    #define PCI_IDSEL_NUMBER      0x0c 	/*slot0->3(IDSEL)=12->15*/
-#endif
-
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
@@ -374,7 +385,7 @@
 #define CONFIG_MPC85XX_TSEC2_NAME	"eTSEC1"
 #define CONFIG_MPC85XX_TSEC3	1
 #define CONFIG_MPC85XX_TSEC3_NAME	"eTSEC2"
-#define CONFIG_MPC85XX_TSEC4	1
+#undef CONFIG_MPC85XX_TSEC4
 #define CONFIG_MPC85XX_TSEC4_NAME	"eTSEC3"
 #undef CONFIG_MPC85XX_FEC
 
@@ -382,13 +393,11 @@
 #define TSEC2_PHY_ADDR		1
 #define TSEC3_PHY_ADDR		2
 #define TSEC4_PHY_ADDR		3
-#define FEC_PHY_ADDR		3
 
 #define TSEC1_PHYIDX		0
 #define TSEC2_PHYIDX		0
 #define TSEC3_PHYIDX		0
 #define TSEC4_PHYIDX		0
-#define FEC_PHYIDX		0
 
 /* Options are: eTSEC[0-3] */
 #define CONFIG_ETHPRIME		"eTSEC0"
@@ -476,6 +485,8 @@
 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
 #define CONFIG_HAS_ETH2
 #define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR  00:E0:0C:00:03:FD
 #endif
 
 #define CONFIG_IPADDR    192.168.1.253
@@ -498,8 +509,11 @@
 #define	CONFIG_EXTRA_ENV_SETTINGS				        \
    "netdev=eth0\0"                                                      \
    "consoledev=ttyS1\0"                                                 \
-   "ramdiskaddr=400000\0"                                               \
-   "ramdiskfile=your.ramdisk.u-boot\0"
+   "ramdiskaddr=600000\0"                                               \
+   "ramdiskfile=your.ramdisk.u-boot\0"					\
+   "fdtaddr=400000\0"							\
+   "fdtfile=your.fdt.dtb\0"
+
 
 #define CONFIG_NFSBOOTCOMMAND	                                        \
    "setenv bootargs root=/dev/nfs rw "                                  \
@@ -507,7 +521,9 @@
       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr"
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
+
 
 #define CONFIG_RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                  \
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index a44e3ec..4c8b4e7 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -308,13 +308,29 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8555@0"
+#define OF_SOC			"soc8555@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/soc8555@e0000000/serial@4600"
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_EEPROM_ADDR	0x57
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
 
 /*
  * General PCI
@@ -323,33 +339,28 @@
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0xe2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
 
 #define CFG_PCI2_MEM_BASE	0xa0000000
 #define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
 #define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI2_IO_BASE	0xe3000000
-#define CFG_PCI2_IO_PHYS	CFG_PCI2_IO_BASE
-#define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe2100000
+#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
 
 
 #if defined(CONFIG_PCI)
 
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+#define CONFIG_MPC85XX_PCI2
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
-#if !defined(CONFIG_PCI_PNP)
-    #define PCI_ENET0_IOADDR      0xe0000000
-    #define PCI_ENET0_MEMADDR     0xe0000000
-    #define PCI_IDSEL_NUMBER      0x0c 	/*slot0->3(IDSEL)=12->15*/
-#endif
-
-#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
 #endif	/* CONFIG_PCI */
@@ -482,8 +493,10 @@
 #define	CONFIG_EXTRA_ENV_SETTINGS				        \
    "netdev=eth0\0"                                                      \
    "consoledev=ttyS1\0"                                                 \
-   "ramdiskaddr=400000\0"                                               \
-   "ramdiskfile=your.ramdisk.u-boot\0"
+   "ramdiskaddr=600000\0"                                               \
+   "ramdiskfile=your.ramdisk.u-boot\0"					\
+   "fdtaddr=400000\0"							\
+   "fdtfile=your.fdt.dtb\0"
 
 #define CONFIG_NFSBOOTCOMMAND	                                        \
    "setenv bootargs root=/dev/nfs rw "                                  \
@@ -491,7 +504,8 @@
       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr"
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                  \
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 2d5031b..835bf5c 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -290,12 +290,28 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
-#define  CONFIG_HARD_I2C		/* I2C with hardware support*/
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8560@0"
+#define OF_SOC			"soc8560@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/soc8560@e0000000/serial@4500"
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
 
 /* RapidIO MMU */
 #define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
new file mode 100644
index 0000000..246ac7f
--- /dev/null
+++ b/include/configs/MPC8641HPCN.h
@@ -0,0 +1,634 @@
+/*
+ * Copyright 2006 Freescale Semiconductor.
+ *
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MPC8641HPCN board configuration file
+ *
+ * Make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_MPC86xx		1	/* MPC86xx */
+#define CONFIG_MPC8641		1	/* MPC8641 specific */
+#define CONFIG_MPC8641HPCN	1	/* MPC8641HPCN board specific */
+#define CONFIG_NUM_CPUS         2       /* Number of CPUs in the system */
+#define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
+#undef DEBUG
+
+#ifdef RUN_DIAG
+#define CFG_DIAG_ADDR        0xff800000
+#endif
+
+#define CFG_RESET_ADDRESS    0xfff00100
+
+/*#undef CONFIG_PCI*/
+#define CONFIG_PCI
+
+#define CONFIG_TSEC_ENET 		/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
+#undef CONFIG_DDR_DLL			/* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+#define CONFIG_NUM_DDR_CONTROLLERS     2
+/* #define CONFIG_DDR_INTERLEAVE               1 */
+#define CACHE_LINE_INTERLEAVING		0x20000000
+#define PAGE_INTERLEAVING		0x21000000
+#define BANK_INTERLEAVING		0x22000000
+#define SUPER_BANK_INTERLEAVING		0x23000000
+
+
+#define CONFIG_ALTIVEC          1
+
+/*
+ * L2CR setup -- make sure this is right for your board!
+ */
+#define CFG_L2
+#define L2_INIT		0
+#define L2_ENABLE	(L2CR_L2E)
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+
+#undef	CFG_DRAM_TEST			/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00200000	/* memtest region */
+#define CFG_MEMTEST_END		0x00400000
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xf8000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_VERY_BIG_RAM
+
+#define MPC86xx_DDR_SDRAM_CLK_CNTL
+
+#if defined(CONFIG_SPD_EEPROM)
+    /*
+     * Determine DDR configuration from I2C interface.
+     */
+    #define SPD_EEPROM_ADDRESS1		0x51		/* DDR DIMM */
+    #define SPD_EEPROM_ADDRESS2		0x52		/* DDR DIMM */
+    #define SPD_EEPROM_ADDRESS3		0x53		/* DDR DIMM */
+    #define SPD_EEPROM_ADDRESS4		0x54		/* DDR DIMM */
+
+#else
+    /*
+     * Manually set up DDR1 parameters
+     */
+
+    #define CFG_SDRAM_SIZE	256		/* DDR is 256MB */
+
+    #define CFG_DDR_CS0_BNDS	0x0000000F
+    #define CFG_DDR_CS0_CONFIG	0x80010102      /* Enable, no interleaving */
+    #define CFG_DDR_EXT_REFRESH 0x00000000
+    #define CFG_DDR_TIMING_0    0x00260802
+    #define CFG_DDR_TIMING_1	0x39357322
+    #define CFG_DDR_TIMING_2	0x14904cc8
+    #define CFG_DDR_MODE_1	0x00480432
+    #define CFG_DDR_MODE_2	0x00000000
+    #define CFG_DDR_INTERVAL	0x06090100
+    #define CFG_DDR_DATA_INIT   0xdeadbeef
+    #define CFG_DDR_CLK_CTRL    0x03800000
+    #define CFG_DDR_OCD_CTRL    0x00000000
+    #define CFG_DDR_OCD_STATUS  0x00000000
+    #define CFG_DDR_CONTROL	0xe3008000	/* Type = DDR2 */
+    #define CFG_DDR_CONTROL2	0x04400000
+
+    /* Not used in fixed_sdram function */
+
+    #define CFG_DDR_MODE	0x00000022
+    #define CFG_DDR_CS1_BNDS	0x00000000
+    #define CFG_DDR_CS2_BNDS	0x00000FFF	/* Not done */
+    #define CFG_DDR_CS3_BNDS	0x00000FFF	/* Not done */
+    #define CFG_DDR_CS4_BNDS	0x00000FFF	/* Not done */
+    #define CFG_DDR_CS5_BNDS	0x00000FFF	/* Not done */
+#endif
+
+#define CFG_ID_EEPROM	1
+#define ID_EEPROM_ADDR 0x57
+
+/*
+ * In MPC8641HPCN, allocate 16MB flash spaces at fe000000 and ff000000.
+ * There is an 8MB flash.  In effect, the addresses from fe000000 to fe7fffff
+ * map to fe800000 to ffffffff, and ff000000 to ff7fffff map to ffffffff.
+ * However, when u-boot comes up, the flash_init needs hard start addresses
+ * to build its info table.  For user convenience, the flash addresses is
+ * fe800000 and ff800000.  That way, u-boot knows where the flash is
+ * and the user can download u-boot code from promjet to fef00000, a
+ * more intuitive location than fe700000.
+ *
+ * Note that, on switching the boot location, fef00000 becomes fff00000.
+ */
+#define CFG_FLASH_BASE          0xfe800000     /* start of FLASH 32M */
+#define CFG_FLASH_BASE2		0xff800000
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
+
+#define CFG_BR0_PRELIM		0xff001001	/* port size 16bit */
+#define CFG_OR0_PRELIM		0xff006ff7	/* 16MB Boot Flash area*/
+
+#define CFG_BR1_PRELIM		0xfe001001	/* port size 16bit */
+#define CFG_OR1_PRELIM		0xff006ff7	/* 16MB Alternate Boot Flash area*/
+
+#define CFG_BR2_PRELIM		0xf8201001	/* port size 16bit */
+#define CFG_OR2_PRELIM		0xfff06ff7	/* 1MB Compact Flash area*/
+
+#define CFG_BR3_PRELIM		0xf8100801	/* port size 8bit */
+#define CFG_OR3_PRELIM		0xfff06ff7	/* 1MB PIXIS area*/
+
+
+#define PIXIS_BASE	0xf8100000      /* PIXIS registers */
+#define PIXIS_ID		0x0	/* Board ID at offset 0 */
+#define PIXIS_VER		0x1	/* Board version at offset 1 */
+#define PIXIS_PVER		0x2	/* PIXIS FPGA version at offset 2 */
+#define PIXIS_RST		0x4	/* PIXIS Reset Control register */
+#define PIXIS_AUX		0x6	/* PIXIS Auxiliary register; Scratch register */
+#define PIXIS_SPD		0x7	/* Register for SYSCLK speed */
+#define PIXIS_VCTL		0x10	/* VELA Control Register */
+#define PIXIS_VCFGEN0		0x12	/* VELA Config Enable 0 */
+#define PIXIS_VCFGEN1		0x13	/* VELA Config Enable 1 */
+#define PIXIS_VBOOT		0x16	/* VELA VBOOT Register */
+#define PIXIS_VSPEED0		0x17	/* VELA VSpeed 0 */
+#define PIXIS_VSPEED1		0x18	/* VELA VSpeed 1 */
+#define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
+#define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
+
+#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
+#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#if defined(CFG_RAMBOOT)
+#undef CFG_FLASH_CFI_DRIVER
+#undef CONFIG_SPD_EEPROM
+#define CFG_SDRAM_SIZE	256
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK	1
+#ifndef CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR	0x0fd00000	/* Initial RAM address */
+#else
+#define CFG_INIT_RAM_ADDR	0xf8400000	/* Initial RAM address */
+#endif
+#define CFG_INIT_RAM_END    	0x4000	    	/* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE  	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024)    /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX     1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE    1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/*
+ * Pass open firmware flat tree to kernel
+ */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU		"PowerPC,8641@0"
+#define OF_SOC		"soc8641@f8000000"
+#define OF_TBCLK	(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH	"/soc8641@f8000000/serial@4500"
+
+#define CFG_64BIT_VSPRINTF	1
+#define CFG_64BIT_STRTOUL	1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3100
+
+/*
+ * RapidIO MMU
+ */
+#define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
+#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
+#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0xe2000000
+#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
+#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS      0x00000000
+#define CFG_PCI_MEMORY_PHYS     0x00000000
+#define CFG_PCI_MEMORY_SIZE     0x80000000
+
+/* For RTL8139 */
+#define KSEG1ADDR(x)		({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);})
+#define _IO_BASE                0x00000000
+
+#define CFG_PCI2_MEM_BASE	0xa0000000
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI2_IO_BASE	0xe3000000
+#define CFG_PCI2_IO_PHYS	CFG_PCI2_IO_BASE
+#define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
+
+#undef CFG_SCSI_SCAN_BUS_REVERSE
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+
+#define CONFIG_RTL8139
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+    #define PCI_ENET0_IOADDR	0xe0000000
+    #define PCI_ENET0_MEMADDR	0xe0000000
+    #define PCI_IDSEL_NUMBER	0x0c 	/* slot0->3(IDSEL)=12->15 */
+#endif
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SCSI_AHCI
+
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_SATA_ULI5288
+#define CFG_SCSI_MAX_SCSI_ID	4
+#define CFG_SCSI_MAX_LUN	1
+#define CFG_SCSI_MAX_DEVICE 	(CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAXDEVICE	CFG_SCSI_MAX_DEVICE
+#endif
+
+#endif	/* CONFIG_PCI */
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 	1
+#endif
+
+#define CONFIG_MII		1	/* MII PHY management */
+
+#define CONFIG_MPC86XX_TSEC1    1
+#define CONFIG_MPC86XX_TSEC1_NAME       "eTSEC1"
+#define CONFIG_MPC86XX_TSEC2    1
+#define CONFIG_MPC86XX_TSEC2_NAME       "eTSEC2"
+#define CONFIG_MPC86XX_TSEC3    1
+#define CONFIG_MPC86XX_TSEC3_NAME       "eTSEC3"
+#define CONFIG_MPC86XX_TSEC4    1
+#define CONFIG_MPC86XX_TSEC4_NAME       "eTSEC4"
+
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+#define TSEC3_PHY_ADDR		2
+#define TSEC4_PHY_ADDR		3
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define TSEC3_PHYIDX		0
+#define TSEC4_PHYIDX		0
+
+#define CONFIG_ETHPRIME		"eTSEC1"
+
+#endif	/* CONFIG_TSEC_ENET */
+
+/*
+ * BAT0         2G     Cacheable, non-guarded
+ * 0x0000_0000  2G     DDR
+ */
+#define CFG_DBAT0L      (BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT0U      (BATU_BL_2G | BATU_VS | BATU_VP)
+#define CFG_IBAT0L      (BATL_PP_RW | BATL_MEMCOHERENCE )
+#define CFG_IBAT0U      CFG_DBAT0U
+
+/*
+ * BAT1         1G     Cache-inhibited, guarded
+ * 0x8000_0000  512M   PCI-Express 1 Memory
+ * 0xa000_0000  512M   PCI-Express 2 Memory
+ *	Changed it for operating from 0xd0000000
+ */
+#define CFG_DBAT1L      ( CFG_PCI1_MEM_BASE | BATL_PP_RW \
+			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT1U      (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT1L      (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT1U      CFG_DBAT1U
+
+/*
+ * BAT2         512M   Cache-inhibited, guarded
+ * 0xc000_0000  512M   RapidIO Memory
+ */
+#define CFG_DBAT2L      (CFG_RIO_MEM_BASE | BATL_PP_RW \
+			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U      (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L      (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U      CFG_DBAT2U
+
+/*
+ * BAT3         4M     Cache-inhibited, guarded
+ * 0xf800_0000  4M     CCSR
+ */
+#define CFG_DBAT3L      ( CFG_CCSRBAR | BATL_PP_RW \
+			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U      (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_IBAT3L      (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U      CFG_DBAT3U
+
+/*
+ * BAT4         32M    Cache-inhibited, guarded
+ * 0xe200_0000  16M    PCI-Express 1 I/O
+ * 0xe300_0000  16M    PCI-Express 2 I/0
+ *    Note that this is at 0xe0000000
+ */
+#define CFG_DBAT4L      ( CFG_PCI1_IO_BASE | BATL_PP_RW \
+			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4U      (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L      (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT4U      CFG_DBAT4U
+
+/*
+ * BAT5         128K   Cacheable, non-guarded
+ * 0xe401_0000  128K   Init RAM for stack in the CPU DCache (no backing memory)
+ */
+#define CFG_DBAT5L      (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT5U      (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_IBAT5L      CFG_DBAT5L
+#define CFG_IBAT5U      CFG_DBAT5U
+
+/*
+ * BAT6         32M    Cache-inhibited, guarded
+ * 0xfe00_0000  32M    FLASH
+ */
+#define CFG_DBAT6L      ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \
+			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT6U      ((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT6L      ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U      CFG_DBAT6U
+
+#define CFG_DBAT7L 0x00000000
+#define CFG_DBAT7U 0x00000000
+#define CFG_IBAT7L 0x00000000
+#define CFG_IBAT7U 0x00000000
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+    #define CFG_ENV_IS_IN_FLASH	1
+    #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+    #define CFG_ENV_SECT_SIZE		0x40000	/* 256K(one sector) for env */
+    #define CFG_ENV_SIZE		0x2000
+#else
+    #define CFG_NO_FLASH		1	/* Flash is not usable now */
+    #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+    #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+    #define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+  #if defined(CONFIG_PCI)
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_PCI		\
+				 | CFG_CMD_I2C		\
+				 | CFG_CMD_SCSI		\
+				 | CFG_CMD_EXT2)	\
+				&			\
+				 ~(CFG_CMD_ENV		\
+				  | CFG_CMD_IMLS	\
+				  | CFG_CMD_FLASH	\
+				  | CFG_CMD_LOADS))
+  #else
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_I2C		\
+				 | CFG_CMD_SCSI		\
+				 | CGF_CMD_EXT2)	\
+				&			\
+				 ~(CFG_CMD_ENV		\
+				 | CFG_CMD_IMLS		\
+				 | CFG_CMD_FLASH	\
+				 | CFG_CMD_LOADS))
+  #endif
+#else
+  #if defined(CONFIG_PCI)
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_PCI		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C		\
+				| CFG_CMD_SCSI		\
+				| CFG_CMD_EXT2)
+  #else
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C)
+  #endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR   00:E0:0C:00:00:01
+#define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
+#define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
+#define CONFIG_ETH3ADDR  00:E0:0C:00:03:FD
+#endif
+
+#define CONFIG_HAS_ETH1		1
+#define CONFIG_HAS_ETH2		1
+#define CONFIG_HAS_ETH3		1
+
+#define CONFIG_IPADDR		192.168.1.100
+
+#define CONFIG_HOSTNAME		unknown
+#define CONFIG_ROOTPATH		/opt/nfsroot
+#define CONFIG_BOOTFILE		uImage
+
+#define CONFIG_SERVERIP		192.168.1.1
+#define CONFIG_GATEWAYIP	192.168.1.1
+#define CONFIG_NETMASK		255.255.255.0
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR		1000000
+
+#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE	115200
+
+#define	CONFIG_EXTRA_ENV_SETTINGS				        \
+   "netdev=eth0\0"                                                      \
+   "consoledev=ttyS0\0"                                                 \
+   "ramdiskaddr=2000000\0"						\
+   "ramdiskfile=your.ramdisk.u-boot\0"                                  \
+   "dtbaddr=400000\0"						\
+   "dtbfile=mpc8641_hpcn.dtb\0"                                  \
+   "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
+   "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
+   "maxcpus=2"
+
+
+#define CONFIG_NFSBOOTCOMMAND	                                        \
+   "setenv bootargs root=/dev/nfs rw "                                  \
+      "nfsroot=$serverip:$rootpath "                                    \
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $loadaddr $bootfile;"                                          \
+   "tftp $dtbaddr $dtbfile;"                                          \
+   "bootm $loadaddr - $dtbaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "                                  \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "tftp $dtbaddr $dtbfile;"                                          \
+   "bootm $loadaddr $ramdiskaddr $dtbaddr"
+
+#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index da01186..4fb5440 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -193,12 +193,16 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
-#define	 CONFIG_HARD_I2C		/* I2C with hardware support*/
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
 
 /*
  * EEPROM configuration
diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index 4d83487..87ab934 100644
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -190,12 +190,16 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
-#define  CONFIG_HARD_I2C		/* I2C with hardware support*/
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
 
 /*
  * EEPROM configuration
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 0451b20..f8e3397 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -214,12 +214,16 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
-#define	 CONFIG_HARD_I2C		/* I2C with hardware support*/
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
 
 #define CFG_PCI_MEM_BASE	0xC0000000
 #define CFG_PCI_MEM_PHYS	0xC0000000
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index bc3b9aa..cce4624 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -192,12 +192,17 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES	{0x48}	/* Don't probe these addrs	*/
+#define CFG_I2C_OFFSET		0x3000
 
 /* I2C RTC */
 #define CONFIG_RTC_DS1337		/* Use ds1337 rtc via i2c	*/
diff --git a/include/configs/V38B.h b/include/configs/V38B.h
new file mode 100644
index 0000000..8eea504
--- /dev/null
+++ b/include/configs/V38B.h
@@ -0,0 +1,368 @@
+/*
+ * (C) Copyright 2003-2004 Wolfgang Denk, DENX Software Engineering,
+ * wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#if 0
+#define DEBUG 0xFFF
+#endif
+
+#if 0
+#define DEBUG 0x01
+#endif
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+*/
+
+#define CONFIG_MPC5xxx			1	/* This is an MPC5xxx CPU	*/
+#define CONFIG_MPC5200			1	/* This is an MPC5200 CPU	*/
+#define CONFIG_V38B			1	/* ... on V38B board		*/
+#define CFG_MPC5XXX_CLKIN	33000000	/* ... running at 33.000000MHz	*/
+
+#define CONFIG_RTC_PCF8563		1	/* has PCF8563 RTC		*/
+#define CONFIG_MPC5200_DDR		1	/* has DDR SDRAM		*/
+#define CONFIG_HW_WATCHDOG		1	/* has watchdog			*/
+
+#define CONFIG_NETCONSOLE		1
+
+#define CONFIG_BOARD_EARLY_INIT_R	1	/* make flash read/write	*/
+
+#define CFG_XLB_PIPELINING		1	/* gives better performance	*/
+
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps	*/
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+
+/*
+ * DDR
+ */
+#define SDRAM_DDR		1	/* is DDR */
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE		0x018D0000
+#define SDRAM_EMODE		0x40090000
+#define SDRAM_CONTROL		0x704f0f00
+#define SDRAM_CONFIG1		0x73722930
+#define SDRAM_CONFIG2		0x47770000
+#define SDRAM_TAPDELAY		0x10000000
+
+
+/*
+ * PCI - no suport
+ */
+#undef CONFIG_PCI
+
+/*
+ * Partitions
+ */
+#define CONFIG_MAC_PARTITION	1
+#define CONFIG_DOS_PARTITION	1
+
+/*
+ * USB
+ */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
+				 CFG_CMD_FAT	| \
+				 CFG_CMD_I2C	| \
+				 CFG_CMD_IDE	| \
+				 CFG_CMD_PING	| \
+				 CFG_CMD_DHCP	| \
+				 CFG_CMD_DIAG	| \
+				 CFG_CMD_IRQ	| \
+				 CFG_CMD_JFFS2	| \
+				 CFG_CMD_MII	| \
+				 CFG_CMD_SDRAMi | \
+				 CFG_CMD_DATE	| \
+				 CFG_CMD_USB	| \
+				 CFG_CMD_FAT)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Boot low with 16 MB Flash
+ */
+#   define CFG_LOWBOOT		1
+#   define CFG_LOWBOOT16	1
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
+
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"devno=5\0"							\
+	"hostname=V38B_$(devno)\0"					\
+	"ipaddr=10.100.99.$(devno)\0"					\
+	"netmask=255.255.0.0\0"						\
+	"serverip=10.100.10.90\0"					\
+	"gatewayip=10.100.254.254\0"					\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"rootpath=/opt/eldk/ppc_6xx\0"					\
+	"bootfile=mpc5200/uImage\0"					\
+	"bootcmd=run net_nfs\0"						\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):"		\
+		"$(netmask):$(hostname):$(netdev):off panic=1\0"	\
+	"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0"		\
+	"flash_self=run ramargs addip;bootm $(kernel_addr) "		\
+		"$(ramdisk_addr)\0"					\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs "			\
+		"addip;bootm\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+	""
+
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
+
+#if defined(CONFIG_MPC5200)
+/*
+ * IPB Bus clocking configuration.
+ */
+#undef CFG_IPBSPEED_133			/* define for 133MHz speed */
+#endif
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+
+#define CFG_I2C_SPEED		100000 /* 100 kHz */
+#define CFG_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CFG_I2C_EEPROM_ADDR_LEN		1
+#define CFG_EEPROM_PAGE_WRITE_BITS	3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+
+/*
+ * RTC configuration
+ */
+#define CFG_I2C_RTC_ADDR		0x51
+
+/*
+ * Flash configuration - use CFI driver
+ */
+#define CFG_FLASH_CFI		1		/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1		/* Use the common driver */
+#define CFG_FLASH_CFI_AMD_RESET 1
+#define CFG_FLASH_BASE		0xFF000000
+#define CFG_MAX_FLASH_BANKS	1		/* max num of flash banks */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_SIZE		0x01000000	/* 16 MiB */
+#define CFG_MAX_FLASH_SECT	256		/* max num of sects on one chip */
+#define CFG_FLASH_USE_BUFFER_WRITE	1	/* flash write speed-up */
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000)
+#define CFG_ENV_SIZE		0x10000
+#define CFG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_OVERWRITE	1
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xF0000000
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_DEFAULT_MBAR	0x80000000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT		1
+#endif
+
+#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC	1
+#define CONFIG_PHY_ADDR		0x00
+#define CONFIG_MII		1
+
+/*
+ * GPIO configuration
+ */
+#define CFG_GPS_PORT_CONFIG	0x90000404
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	    */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL		HID0_ICE
+#else
+#define CFG_HID0_INIT		0
+#define CFG_HID0_FINAL		0
+#endif
+
+
+#define CFG_BOOTCS_START	CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG		0x00047801
+#define CFG_CS0_START		CFG_FLASH_BASE
+#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+
+#define CFG_CS_BURST		0x00000000
+#define CFG_CS_DEADCYCLE	0x33333333
+
+#define CFG_RESET_ADDRESS	0xff000000
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK	0x0001BBBB
+#define CONFIG_USB_CONFIG	0x00001000
+
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef	CONFIG_IDE_8xx_PCCARD		/* Don't use IDE with PC Card	Adapter */
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
+
+#define CONFIG_IDE_RESET		/* reset for ide supported	*/
+#define CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(0x0060)
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	(0x005C)
+
+/* Interval between registers						     */
+#define CFG_ATA_STRIDE		4
+
+/* Status LED						     */
+
+#define	 CONFIG_STATUS_LED		 /* Status LED enabled		 */
+#define	 CONFIG_BOARD_SPECIFIC_LED	 /* version has board specific leds */
+
+#define CFG_LED_BASE	(0xf0000600 + 0x70)	/* Timer 7 GPIO */
+
+#ifndef __ASSEMBLY__
+/* LEDs */
+typedef unsigned int led_id_t;
+
+#define __led_toggle(_msk) \
+	do { \
+		*((volatile long *) (CFG_LED_BASE)) ^= (_msk); \
+	} while(0)
+
+#define __led_set(_msk, _st) \
+	do { \
+		if ((_st)) \
+			*((volatile long *) (CFG_LED_BASE)) &= ~(_msk); \
+		else \
+			*((volatile long *) (CFG_LED_BASE)) |= (_msk); \
+	} while(0)
+
+#define __led_init(_msk, st) \
+	{ \
+		*((volatile long *) (CFG_LED_BASE)) |= 0x34; \
+	}
+
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
new file mode 100644
index 0000000..458ebab
--- /dev/null
+++ b/include/configs/atstk1002.h
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1002 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32			1
+#define CONFIG_AT32AP			1
+#define CONFIG_AT32AP7000		1
+#define CONFIG_ATSTK1002		1
+#define CONFIG_ATSTK1000		1
+
+#define CONFIG_ATSTK1000_EXT_FLASH	1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ				1000
+
+/*
+ * Set up the PLL to run at 199.5 MHz, the CPU to run at 1/2 the PLL
+ * frequency and the peripherals to run at 1/4 the PLL frequency.
+ */
+#define CONFIG_PLL			1
+#define CFG_POWER_MANAGER		1
+#define CFG_OSC0_HZ			20000000
+#define CFG_PLL0_DIV			1
+#define CFG_PLL0_MUL			7
+#define CFG_PLL0_SUPPRESS_CYCLES	16
+#define CFG_CLKDIV_CPU			0
+#define CFG_CLKDIV_HSB			1
+#define CFG_CLKDIV_PBA			2
+#define CFG_CLKDIV_PBB			1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ *   icp = PLLOPT<2>
+ *   ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT			0x04
+
+#define CFG_USART1			1
+
+#define CFG_CONSOLE_UART_DEV		DEVICE_USART1
+
+/* User serviceable stuff */
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_STACKSIZE		(2048)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"console=ttyUS0 root=/dev/mtdblock1 fbmem=600k"
+
+#define CONFIG_COMMANDS			(CFG_CMD_BDI			\
+					 | CFG_CMD_LOADS		\
+					 | CFG_CMD_LOADB		\
+					 /* | CFG_CMD_IMI */		\
+					 /* | CFG_CMD_CACHE */		\
+					 | CFG_CMD_FLASH		\
+					 | CFG_CMD_MEMORY		\
+					 /* | CFG_CMD_NET */		\
+					 | CFG_CMD_ENV			\
+					 /* | CFG_CMD_IRQ */		\
+					 | CFG_CMD_BOOTD		\
+					 | CFG_CMD_CONSOLE		\
+					 /* | CFG_CMD_EEPROM */		\
+					 | CFG_CMD_ASKENV		\
+					 | CFG_CMD_RUN			\
+					 | CFG_CMD_ECHO			\
+					 /* | CFG_CMD_I2C */		\
+					 | CFG_CMD_REGINFO		\
+					 /* | CFG_CMD_DATE */		\
+					 /* | CFG_CMD_DHCP */		\
+					 /* | CFG_CMD_AUTOSCRIPT */	\
+					 /* | CFG_CMD_MII */		\
+					 | CFG_CMD_MISC			\
+					 /* | CFG_CMD_SDRAM */		\
+					 /* | CFG_CMD_DIAG */		\
+					 /* | CFG_CMD_HWFLOW */		\
+					 /* | CFG_CMD_SAVES */		\
+					 /* | CFG_CMD_SPI */		\
+					 /* | CFG_CMD_PING */		\
+					 /* | CFG_CMD_MMC */		\
+					 /* | CFG_CMD_FAT */		\
+					 /* | CFG_CMD_IMLS */		\
+					 /* | CFG_CMD_ITEST */		\
+					 /* | CFG_CMD_EXT2 */		\
+		)
+
+#include <cmd_confdefs.h>
+
+#define CONFIG_ATMEL_USART		1
+#define CONFIG_PIO2			1
+#define CFG_NR_PIOS			5
+#define CFG_HSDRAMC			1
+
+#define CFG_DCACHE_LINESZ		32
+#define CFG_ICACHE_LINESZ		32
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI			1
+#define CFG_FLASH_CFI_DRIVER		1
+#endif
+
+#define CFG_FLASH_BASE			0x00000000
+#define CFG_FLASH_SIZE			0x800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		135
+
+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE			0x24000000
+#define CFG_INTRAM_SIZE			0x8000
+
+#define CFG_SDRAM_BASE			0x10000000
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			65536
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN			(256*1024)
+#define CFG_MALLOC_END							\
+	({								\
+		DECLARE_GLOBAL_DATA_PTR;				\
+		CFG_SDRAM_BASE + gd->sdram_size;			\
+	})
+#define CFG_MALLOC_START		(CFG_MALLOC_END - CFG_MALLOC_LEN)
+
+#define CFG_DMA_ALLOC_LEN		(16384)
+#define CFG_DMA_ALLOC_END		(CFG_MALLOC_START)
+#define CFG_DMA_ALLOC_START		(CFG_DMA_ALLOC_END - CFG_DMA_ALLOC_LEN)
+/* Allow 2MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00200000)
+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT			"Uboot> "
+#define CFG_CBSIZE			256
+#define CFG_MAXARGS			8
+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP			1
+
+#define CFG_MEMTEST_START						\
+	({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; })
+#define CFG_MEMTEST_END							\
+	({								\
+		DECLARE_GLOBAL_DATA_PTR;				\
+		gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;	\
+	})
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index 5d7bed6..372b10c 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -28,7 +28,7 @@
 #define CONFIG_MPC8260
 #define CPU_ID_STR		"MPC8270"
 
-#define CONFIG_EP82XXM	/* Embedded Planet EP82xxM H 1.0 board /*
+#define CONFIG_EP82XXM	/* Embedded Planet EP82xxM H 1.0 board */
 			/* 256MB SDRAM / 64MB FLASH */
 
 #undef DEBUG
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 5a434dc..6e4fdb2 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -197,12 +197,16 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
-#define	 CONFIG_HARD_I2C		/* I2C with hardware support*/
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
 
 #define CFG_PCI_MEM_BASE	0xC0000000
 #define CFG_PCI_MEM_PHYS	0xC0000000
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index f67fd91..3a76315 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -134,13 +134,6 @@
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 #endif
 
-/*-----------------------------------------------------------------------
- * NAND FLASH
- *----------------------------------------------------------------------*/
-#define CFG_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS		1
-#define CFG_NAND_BASE		CFG_NAND_ADDR
-
 /*
  * IPL (Initial Program Loader, integrated inside CPU)
  * Will load first 4k from NAND (SPL) into cache and execute it from there.
@@ -406,6 +399,14 @@
 #define CFG_EBC_PB2CR		(CFG_CPLD | 0x38000)
 
 /*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
+#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
+
+/*-----------------------------------------------------------------------
  * Cache Configuration
  *----------------------------------------------------------------------*/
 #define CFG_DCACHE_SIZE		(32<<10)  /* For AMCC 440 CPUs			*/
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index e218597..625cf20 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -172,8 +172,11 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
-#define  CONFIG_HARD_I2C    		/* I2C with hardware support*/
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
@@ -183,6 +186,7 @@
 /* I did the 'if 0' so we could keep the syntax above if ever needed. */
 #undef CFG_I2C_NOPROBES
 #endif
+#define CFG_I2C_OFFSET		0x3000
 
 /* RapdIO Map configuration, mapped 1:1.
 */
diff --git a/include/ft_build.h b/include/ft_build.h
index 47ca575..89c689c 100644
--- a/include/ft_build.h
+++ b/include/ft_build.h
@@ -36,19 +36,18 @@
 
 struct ft_cxt {
 	struct boot_param_header *bph;
-	int max_size;		/* maximum size of tree */
-	int overflow;		/* set when this happens */
-	u8 *p, *pstr, *pres;	/* running pointers */
-	u8 *p_begin, *pstr_begin, *pres_begin;	/* starting pointers */
-	u8 *p_anchor;		/* start of constructed area */
-	int struct_size, strings_size, res_size;
+	u8 *p_rsvmap;
+	u8 *p_start;  /* pointer to beginning of dt_struct */
+	u8 *p_end; /* pointer to end of dt_strings */
+	u8 *p; /* pointer to end of dt_struct and beginning of dt_strings */
 };
 
 void ft_begin_node(struct ft_cxt *cxt, const char *name);
+void ft_init_cxt(struct ft_cxt *cxt, void *blob);
 void ft_end_node(struct ft_cxt *cxt);
 
-void ft_begin_tree(struct ft_cxt *cxt);
-int ft_end_tree(struct ft_cxt *cxt);
+void ft_end_tree(struct ft_cxt *cxt);
+void ft_finalize_tree(struct ft_cxt *cxt);
 
 void ft_nop(struct ft_cxt *cxt);
 void ft_prop(struct ft_cxt *cxt, const char *name, const void *data, int sz);
@@ -57,12 +56,16 @@
 void ft_begin(struct ft_cxt *cxt, void *blob, int max_size);
 void ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size);
 
-void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_end);
+void ft_setup(void *blob, bd_t * bd, ulong initrd_start, ulong initrd_end);
 
 void ft_dump_blob(const void *bphp);
 void ft_merge_blob(struct ft_cxt *cxt, void *blob);
 void *ft_get_prop(void *bphp, const char *propname, int *szp);
 
+#ifdef CONFIG_OF_BOARD_SETUP
 void ft_board_setup(void *blob, bd_t *bd);
+void ft_cpu_setup(void *blob, bd_t *bd);
+void ft_pci_setup(void *blob, bd_t *bd);
+#endif
 
 #endif
diff --git a/include/image.h b/include/image.h
index d9f2d46..2f575fd 100644
--- a/include/image.h
+++ b/include/image.h
@@ -125,6 +125,7 @@
 #define IH_TYPE_FIRMWARE	5	/* Firmware Image		*/
 #define IH_TYPE_SCRIPT		6	/* Script file			*/
 #define IH_TYPE_FILESYSTEM	7	/* Filesystem Image (any type)	*/
+#define IH_TYPE_FLATDT		8	/* Binary Flat Device Tree Blob	*/
 
 /*
  * Compression Types
diff --git a/include/mpc86xx.h b/include/mpc86xx.h
new file mode 100644
index 0000000..bc8ba3f
--- /dev/null
+++ b/include/mpc86xx.h
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2006 Freescale Semiconductor.
+ * Jeffrey Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ */
+
+#ifndef	__MPC86xx_H__
+#define __MPC86xx_H__
+
+#define EXC_OFF_SYS_RESET	0x0100	/* System reset	offset */
+
+/*
+ * l2cr values.  Look in config_<BOARD>.h for the actual setup
+ */
+#define l2cr		 1017
+
+#define L2CR_L2E         0x80000000 /* bit 0 - enable */
+#define L2CR_L2PE        0x40000000 /* bit 1 - data parity */
+#define L2CR_L2I         0x00200000 /* bit 10 - global invalidate bit */
+#define L2CR_L2CTL       0x00100000 /* bit 11 - l2 ram control */
+#define L2CR_L2DO        0x00010000 /* bit 15 - data-only mode */
+#define L2CR_REP         0x00001000 /* bit 19 - l2 replacement alg */
+#define L2CR_HWF         0x00000800 /* bit 20 - hardware flush */
+#define L2CR_L2IP        0x00000001 /* global invalidate in progress */
+
+/*
+ * BAT settings.  Look in config_<BOARD>.h for the actual setup
+ */
+
+#define BATU_BL_128K            0x00000000
+#define BATU_BL_256K            0x00000004
+#define BATU_BL_512K            0x0000000c
+#define BATU_BL_1M              0x0000001c
+#define BATU_BL_2M              0x0000003c
+#define BATU_BL_4M              0x0000007c
+#define BATU_BL_8M              0x000000fc
+#define BATU_BL_16M             0x000001fc
+#define BATU_BL_32M             0x000003fc
+#define BATU_BL_64M             0x000007fc
+#define BATU_BL_128M            0x00000ffc
+#define BATU_BL_256M            0x00001ffc
+#define BATU_BL_512M            0x00003ffc
+#define BATU_BL_1G              0x00007ffc
+#define BATU_BL_2G              0x0000fffc
+#define BATU_BL_4G              0x0001fffc
+
+#define BATU_VS                 0x00000002
+#define BATU_VP                 0x00000001
+#define BATU_INVALID            0x00000000
+
+#define BATL_WRITETHROUGH       0x00000040
+#define BATL_CACHEINHIBIT       0x00000020
+#define BATL_MEMCOHERENCE	0x00000010
+#define BATL_GUARDEDSTORAGE     0x00000008
+#define BATL_NO_ACCESS		0x00000000
+
+#define BATL_PP_MSK		0x00000003
+#define BATL_PP_00		0x00000000 /* No access */
+#define BATL_PP_01		0x00000001 /* Read-only */
+#define BATL_PP_10		0x00000002 /* Read-write */
+#define BATL_PP_11		0x00000003
+
+#define BATL_PP_NO_ACCESS	BATL_PP_00
+#define BATL_PP_RO		BATL_PP_01
+#define BATL_PP_RW		BATL_PP_10
+
+#define HID0_XBSEN              0x00000100
+#define HID0_HIGH_BAT_EN        0x00800000
+#define HID0_XAEN               0x00020000
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long freqProcessor;
+	unsigned long freqSystemBus;
+} MPC86xx_SYS_INFO;
+
+#define l1icache_enable	icache_enable
+
+void l2cache_enable(void);
+void l1dcache_enable(void);
+
+static __inline__ unsigned long get_hid0 (void)
+{
+	unsigned long hid0;
+	asm volatile("mfspr %0, 1008" : "=r" (hid0) :);
+	return hid0;
+}
+
+static __inline__ unsigned long get_hid1 (void)
+{
+	unsigned long hid1;
+	asm volatile("mfspr %0, 1009" : "=r" (hid1) :);
+	return hid1;
+}
+
+static __inline__ void set_hid0 (unsigned long hid0)
+{
+	asm volatile("mtspr 1008, %0" : : "r" (hid0));
+}
+
+static __inline__ void set_hid1 (unsigned long hid1)
+{
+	asm volatile("mtspr 1009, %0" : : "r" (hid1));
+}
+
+
+static __inline__ unsigned long get_l2cr (void)
+{
+   unsigned long l2cr_val;
+   asm volatile("mfspr %0, 1017" : "=r" (l2cr_val) :);
+   return l2cr_val;
+}
+
+#endif  /* _ASMLANGUAGE */
+#endif	/* __MPC86xx_H__ */
diff --git a/include/nand.h b/include/nand.h
index 5c7311f..23493f7 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -117,4 +117,8 @@
 int nand_unlock( nand_info_t *meminfo, ulong start, ulong length );
 int nand_get_lock_status(nand_info_t *meminfo, ulong offset);
 
+#ifdef CFG_NAND_SELECT_DEVICE
+void board_nand_select_device(struct nand_chip *nand, int chip);
+#endif
+
 #endif
diff --git a/include/pci.h b/include/pci.h
index 0fc00e4..7c9a0e3 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -270,6 +270,15 @@
 #define  PCI_AGP_COMMAND_RATE1	0x0001	/* Use 4x rate */
 #define PCI_AGP_SIZEOF		12
 
+/* PCI-X registers */
+
+#define  PCI_X_CMD_DPERR_E      0x0001  /* Data Parity Error Recovery Enable */
+#define  PCI_X_CMD_ERO          0x0002  /* Enable Relaxed Ordering */
+#define  PCI_X_CMD_MAX_READ     0x0000  /* Max Memory Read Byte Count */
+#define  PCI_X_CMD_MAX_SPLIT    0x0030  /* Max Outstanding Split Transactions */
+#define  PCI_X_CMD_VERSION(x)   (((x) >> 12) & 3) /* Version */
+
+
 /* Slot Identification */
 
 #define PCI_SID_ESR		2	/* Expansion Slot Register */
@@ -492,4 +501,7 @@
 extern void pci_mpc824x_init (struct pci_controller *hose);
 #endif
 
+#ifdef CONFIG_MPC85xx
+extern void pci_mpc85xx_init (struct pci_controller *hose);
+#endif
 #endif	/* _PCI_H */
diff --git a/include/pci_ids.h b/include/pci_ids.h
index 8cc3ec0..3b10452 100644
--- a/include/pci_ids.h
+++ b/include/pci_ids.h
@@ -1045,6 +1045,9 @@
 #define PCI_DEVICE_ID_REALTEK_8139	0x8139
 #define PCI_DEVICE_ID_REALTEK_8169	0x8169
 
+#define PCI_VENDOR_ID_DLINK		0x1186
+#define PCI_DEVICE_ID_DLINK_8139	0x1300
+
 #define PCI_VENDOR_ID_XILINX		0x10ee
 #define PCI_DEVICE_ID_TURBOPAM		0x4020
 
diff --git a/include/status_led.h b/include/status_led.h
index a56883b..db4c60f 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -346,6 +346,15 @@
 #elif defined(CONFIG_NIOS2)
 /* XXX empty just to avoid the error */
 /************************************************************************/
+#elif defined(CONFIG_V38B)
+
+# define STATUS_LED_BIT		0x0010			/* Timer7 GPIO */
+# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE	0		/* LED on for bit == 0 */
+# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
+
 #else
 # error Status LED configuration missing
 #endif
diff --git a/lib_avr32/Makefile b/lib_avr32/Makefile
new file mode 100644
index 0000000..5b6300b
--- /dev/null
+++ b/lib_avr32/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2004-2006 Atmel Corporation
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(ARCH).a
+
+SOBJS	= memset.o
+
+COBJS	= board.o interrupts.o avr32_linux.o div64.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/lib_avr32/avr32_linux.c b/lib_avr32/avr32_linux.c
new file mode 100644
index 0000000..d128dfb
--- /dev/null
+++ b/lib_avr32/avr32_linux.c
@@ -0,0 +1,315 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <command.h>
+#include <image.h>
+#include <zlib.h>
+#include <asm/byteorder.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/arch/platform.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+/* CPU-specific hook to allow flushing of caches, etc. */
+extern void prepare_to_boot(void);
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# include <status_led.h>
+# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+extern image_header_t header;		/* from cmd_bootm.c */
+
+static struct tag *setup_start_tag(struct tag *params)
+{
+	params->hdr.tag = ATAG_CORE;
+	params->hdr.size = tag_size(tag_core);
+
+	params->u.core.flags = 0;
+	params->u.core.pagesize = 4096;
+	params->u.core.rootdev = 0;
+
+	return tag_next(params);
+}
+
+static struct tag *setup_memory_tags(struct tag *params)
+{
+	bd_t *bd = gd->bd;
+	int i;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		params->hdr.tag = ATAG_MEM;
+		params->hdr.size = tag_size(tag_mem_range);
+
+		params->u.mem_range.addr = bd->bi_dram[i].start;
+		params->u.mem_range.size = bd->bi_dram[i].size;
+
+		params = tag_next(params);
+	}
+
+	return params;
+}
+
+static struct tag *setup_commandline_tag(struct tag *params, char *cmdline)
+{
+	if (!cmdline)
+		return params;
+
+	/* eat leading white space */
+	while (*cmdline == ' ') cmdline++;
+
+	/*
+	 * Don't include tags for empty command lines; let the kernel
+	 * use its default command line.
+	 */
+	if (*cmdline == '\0')
+		return params;
+
+	params->hdr.tag = ATAG_CMDLINE;
+	params->hdr.size =
+		(sizeof (struct tag_header) + strlen(cmdline) + 1 + 3) >> 2;
+	strcpy(params->u.cmdline.cmdline, cmdline);
+
+	return tag_next(params);
+}
+
+static struct tag *setup_ramdisk_tag(struct tag *params,
+				     unsigned long rd_start,
+				     unsigned long rd_end)
+{
+	if (rd_start == rd_end)
+		return params;
+
+	params->hdr.tag = ATAG_RDIMG;
+	params->hdr.size = tag_size(tag_mem_range);
+
+	params->u.mem_range.addr = rd_start;
+	params->u.mem_range.size = rd_end - rd_start;
+
+	return tag_next(params);
+}
+
+static struct tag *setup_clock_tags(struct tag *params)
+{
+	params->hdr.tag = ATAG_CLOCK;
+	params->hdr.size = tag_size(tag_clock);
+	params->u.clock.clock_id = ACLOCK_BOOTCPU;
+	params->u.clock.clock_flags = 0;
+	params->u.clock.clock_hz = gd->cpu_hz;
+
+#ifdef CONFIG_AT32AP7000
+	/*
+	 * New kernels don't need this, but we should be backwards
+	 * compatible for a while...
+	 */
+	params = tag_next(params);
+
+	params->hdr.tag = ATAG_CLOCK;
+	params->hdr.size = tag_size(tag_clock);
+	params->u.clock.clock_id = ACLOCK_HSB;
+	params->u.clock.clock_flags = 0;
+	params->u.clock.clock_hz = pm_get_clock_freq(CLOCK_HSB);
+#endif
+
+	return tag_next(params);
+}
+
+static struct tag *setup_ethernet_tag(struct tag *params,
+				      char *addr, int index)
+{
+	char *s, *e;
+	int i;
+
+	params->hdr.tag = ATAG_ETHERNET;
+	params->hdr.size = tag_size(tag_ethernet);
+
+	params->u.ethernet.mac_index = index;
+	params->u.ethernet.mii_phy_addr = gd->bd->bi_phy_id[index];
+
+	s = addr;
+	for (i = 0; i < 6; i++) {
+		params->u.ethernet.hw_address[i] = simple_strtoul(s, &e, 16);
+		s = e + 1;
+	}
+
+	return tag_next(params);
+}
+
+static struct tag *setup_ethernet_tags(struct tag *params)
+{
+	char name[16] = "ethaddr";
+	char *addr;
+	int i = 0;
+
+	do {
+		addr = getenv(name);
+		if (addr)
+			params = setup_ethernet_tag(params, addr, i);
+		sprintf(name, "eth%daddr", ++i);
+	} while (i < 4);
+
+	return params;
+}
+
+static void setup_end_tag(struct tag *params)
+{
+	params->hdr.tag = ATAG_NONE;
+	params->hdr.size = 0;
+}
+
+void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
+		    unsigned long addr, unsigned long *len_ptr, int verify)
+{
+	unsigned long data, len = 0;
+	unsigned long initrd_start, initrd_end;
+	unsigned long image_start, image_end;
+	unsigned long checksum;
+	void (*theKernel)(int magic, void *tagtable);
+	image_header_t *hdr;
+	struct tag *params, *params_start;
+	char *commandline = getenv("bootargs");
+
+	hdr = (image_header_t *)addr;
+	image_start = addr;
+	image_end = addr + hdr->ih_size;
+
+	theKernel = (void *)ntohl(hdr->ih_ep);
+
+	/*
+	 * Check if there is an initrd image
+	 */
+	if (argc >= 3) {
+		SHOW_BOOT_PROGRESS(9);
+
+		addr = simple_strtoul(argv[2], NULL, 16);
+
+		printf("## Loading RAMDISK image at %08lx ...\n", addr);
+
+		memcpy(&header, (char *)addr, sizeof(header));
+		hdr = &header;
+
+		if (ntohl(hdr->ih_magic) != IH_MAGIC) {
+			puts("Bad Magic Number\n");
+			SHOW_BOOT_PROGRESS(-10);
+			do_reset(cmdtp, flag, argc, argv);
+		}
+
+		data = (unsigned long)hdr;
+		len = sizeof(*hdr);
+		checksum = ntohl(hdr->ih_hcrc);
+		hdr->ih_hcrc = 0;
+
+		if (crc32(0, (unsigned char *)data, len) != checksum) {
+			puts("Bad Header Checksum\n");
+			SHOW_BOOT_PROGRESS(-11);
+			do_reset(cmdtp, flag, argc, argv);
+		}
+
+		SHOW_BOOT_PROGRESS(10);
+
+		print_image_hdr(hdr);
+
+		data = addr + sizeof(header);
+		len = ntohl(hdr->ih_size);
+
+		if (verify) {
+			unsigned long csum = 0;
+
+			puts("   Verifying Checksum ... ");
+			csum = crc32(0, (unsigned char *)data, len);
+			if (csum != ntohl(hdr->ih_dcrc)) {
+				puts("Bad Data CRC\n");
+				SHOW_BOOT_PROGRESS(-12);
+				do_reset(cmdtp, flag, argc, argv);
+			}
+			puts("OK\n");
+		}
+
+		SHOW_BOOT_PROGRESS(11);
+
+		if ((hdr->ih_os != IH_OS_LINUX) ||
+		    (hdr->ih_arch != IH_CPU_AVR32) ||
+		    (hdr->ih_type != IH_TYPE_RAMDISK)) {
+			puts("Not a Linux/AVR32 RAMDISK image\n");
+			SHOW_BOOT_PROGRESS(-13);
+			do_reset(cmdtp, flag, argc, argv);
+		}
+	} else if ((hdr->ih_type == IH_TYPE_MULTI) && (len_ptr[1])) {
+		ulong tail = ntohl (len_ptr[0]) % 4;
+		int i;
+
+		SHOW_BOOT_PROGRESS (13);
+
+		/* skip kernel length and terminator */
+		data = (ulong) (&len_ptr[2]);
+		/* skip any additional image length fields */
+		for (i = 1; len_ptr[i]; ++i)
+			data += 4;
+		/* add kernel length, and align */
+		data += ntohl (len_ptr[0]);
+		if (tail) {
+			data += 4 - tail;
+		}
+
+		len = ntohl (len_ptr[1]);
+	} else {
+		/* no initrd image */
+		SHOW_BOOT_PROGRESS(14);
+		len = data = 0;
+	}
+
+	if (data) {
+		initrd_start = data;
+		initrd_end = initrd_start + len;
+	} else {
+		initrd_start = 0;
+		initrd_end = 0;
+	}
+
+	SHOW_BOOT_PROGRESS(15);
+
+	params = params_start = (struct tag *)gd->bd->bi_boot_params;
+	params = setup_start_tag(params);
+	params = setup_memory_tags(params);
+	if (initrd_start) {
+		params = setup_ramdisk_tag(params,
+					   PHYSADDR(initrd_start),
+					   PHYSADDR(initrd_end));
+	}
+	params = setup_commandline_tag(params, commandline);
+	params = setup_clock_tags(params);
+	params = setup_ethernet_tags(params);
+	setup_end_tag(params);
+
+	printf("\nStarting kernel at %p (params at %p)...\n\n",
+	       theKernel, params_start);
+
+	prepare_to_boot();
+
+	theKernel(ATAG_MAGIC, params_start);
+}
diff --git a/lib_avr32/board.c b/lib_avr32/board.c
new file mode 100644
index 0000000..02c106b
--- /dev/null
+++ b/lib_avr32/board.c
@@ -0,0 +1,175 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <devices.h>
+#include <version.h>
+#include <net.h>
+
+#include <asm/initcalls.h>
+#include <asm/sections.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const char version_string[] =
+	U_BOOT_VERSION " (" __DATE__ " - " __TIME__ ") " CONFIG_IDENT_STRING;
+
+unsigned long monitor_flash_len;
+
+/*
+ * Begin and end of memory area for malloc(), and current "brk"
+ */
+static unsigned long mem_malloc_start = 0;
+static unsigned long mem_malloc_end = 0;
+static unsigned long mem_malloc_brk = 0;
+
+/* The malloc area is wherever the board wants it to be */
+static void mem_malloc_init(void)
+{
+	mem_malloc_start = CFG_MALLOC_START;
+	mem_malloc_end = CFG_MALLOC_END;
+	mem_malloc_brk = mem_malloc_start;
+
+	printf("malloc: Using memory from 0x%08lx to 0x%08lx\n",
+	       mem_malloc_start, mem_malloc_end);
+
+	memset ((void *)mem_malloc_start, 0,
+		mem_malloc_end - mem_malloc_start);
+}
+
+void *sbrk(ptrdiff_t increment)
+{
+	unsigned long old = mem_malloc_brk;
+	unsigned long new = old + increment;
+
+	if ((new < mem_malloc_start) || (new > mem_malloc_end))
+		return NULL;
+
+	mem_malloc_brk = new;
+	return ((void *)old);
+}
+
+static int init_baudrate(void)
+{
+	char tmp[64];
+	int i;
+
+	i = getenv_r("baudrate", tmp, sizeof(tmp));
+	if (i > 0) {
+		gd->baudrate = simple_strtoul(tmp, NULL, 10);
+	} else {
+		gd->baudrate = CONFIG_BAUDRATE;
+	}
+	return 0;
+}
+
+
+static int display_banner (void)
+{
+	printf ("\n\n%s\n\n", version_string);
+	printf ("U-Boot code: %p -> %p  data: %p -> %p\n",
+		_text, _etext, _data, _end);
+	return 0;
+}
+
+void hang(void)
+{
+	for (;;) ;
+}
+
+static int display_dram_config (void)
+{
+	int i;
+
+	puts ("DRAM Configuration:\n");
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		printf ("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
+		print_size (gd->bd->bi_dram[i].size, "\n");
+	}
+
+	return 0;
+}
+
+static void display_flash_config (void)
+{
+	puts ("Flash: ");
+	print_size(gd->bd->bi_flashsize, " ");
+	printf("at address 0x%08lx\n", gd->bd->bi_flashstart);
+}
+
+void start_u_boot (void)
+{
+	gd_t gd_data;
+
+	/* Initialize the global data pointer */
+	memset(&gd_data, 0, sizeof(gd_data));
+	gd = &gd_data;
+
+	monitor_flash_len = _edata - _text;
+
+	/* Perform initialization sequence */
+	cpu_init();
+	timer_init();
+	env_init();
+	init_baudrate();
+	serial_init();
+	console_init_f();
+	display_banner();
+
+	board_init_memories();
+	mem_malloc_init();
+
+	gd->bd = malloc(sizeof(bd_t));
+	memset(gd->bd, 0, sizeof(bd_t));
+	gd->bd->bi_baudrate = gd->baudrate;
+	gd->bd->bi_dram[0].start = CFG_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = gd->sdram_size;
+
+	board_init_info();
+	flash_init();
+
+	if (gd->bd->bi_flashsize)
+		display_flash_config();
+	if (gd->bd->bi_dram[0].size)
+		display_dram_config();
+
+	gd->bd->bi_boot_params = malloc(CFG_BOOTPARAMS_LEN);
+	if (!gd->bd->bi_boot_params)
+		puts("WARNING: Cannot allocate space for boot parameters\n");
+
+	/* initialize environment */
+	env_relocate();
+
+	devices_init();
+	jumptable_init();
+	console_init_r();
+
+	for (;;) {
+		main_loop();
+	}
+}
diff --git a/lib_avr32/div64.c b/lib_avr32/div64.c
new file mode 100644
index 0000000..99726e3
--- /dev/null
+++ b/lib_avr32/div64.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2003 Bernardo Innocenti <bernie@develer.com>
+ *
+ * Based on former do_div() implementation from asm-parisc/div64.h:
+ *	Copyright (C) 1999 Hewlett-Packard Co
+ *	Copyright (C) 1999 David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ *
+ * Generic C version of 64bit/32bit division and modulo, with
+ * 64bit result and 32bit remainder.
+ *
+ * The fast case for (n>>32 == 0) is handled inline by do_div().
+ *
+ * Code generated for this function might be very inefficient
+ * for some CPUs. __div64_32() can be overridden by linking arch-specific
+ * assembly versions such as arch/ppc/lib/div64.S and arch/sh/lib/div64.S.
+ */
+
+#include <linux/types.h>
+
+#include <asm/div64.h>
+
+uint32_t __div64_32(uint64_t *n, uint32_t base)
+{
+	uint64_t rem = *n;
+	uint64_t b = base;
+	uint64_t res, d = 1;
+	uint32_t high = rem >> 32;
+
+	/* Reduce the thing a bit first */
+	res = 0;
+	if (high >= base) {
+		high /= base;
+		res = (uint64_t) high << 32;
+		rem -= (uint64_t) (high*base) << 32;
+	}
+
+	while ((int64_t)b > 0 && b < rem) {
+		b = b+b;
+		d = d+d;
+	}
+
+	do {
+		if (rem >= b) {
+			rem -= b;
+			res += d;
+		}
+		b >>= 1;
+		d >>= 1;
+	} while (d);
+
+	*n = res;
+	return rem;
+}
diff --git a/lib_avr32/interrupts.c b/lib_avr32/interrupts.c
new file mode 100644
index 0000000..ce538f3
--- /dev/null
+++ b/lib_avr32/interrupts.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/sysreg.h>
+
+void enable_interrupts(void)
+{
+	asm volatile("csrf	%0" : : "n"(SYSREG_GM_OFFSET));
+}
+
+int disable_interrupts(void)
+{
+	unsigned long sr;
+
+	sr = sysreg_read(SR);
+	asm volatile("ssrf	%0" : : "n"(SYSREG_GM_OFFSET));
+
+	return SYSREG_BFEXT(GM, sr);
+}
diff --git a/lib_avr32/memset.S b/lib_avr32/memset.S
new file mode 100644
index 0000000..dc3b09b
--- /dev/null
+++ b/lib_avr32/memset.S
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+	/*
+	 * r12:	void *b
+	 * r11:	int c
+	 * r10:	size_t len
+	 *
+	 * Returns b in r12
+	 */
+	.text
+
+	.global	memset
+	.type	memset, @function
+	.align	2
+memset:
+	mov	r9, r12
+	mov	r8, r12
+	or	r11, r11, r11 << 8
+	andl	r9, 3, COH
+	brne	1f
+
+2:	or	r11, r11, r11 << 16
+	sub	r10, 4
+	brlt	5f
+
+	/* Let's do some real work */
+4:	st.w	r8++, r11
+	sub	r10, 4
+	brge	4b
+
+	/*
+	 * When we get here, we've got less than 4 bytes to set. r10
+	 * might be negative.
+	 */
+5:	sub	r10, -4
+	reteq	r12
+
+	/* Fastpath ends here, exactly 32 bytes from memset */
+
+	/* Handle unaligned count or pointer */
+	bld	r10, 1
+	brcc	6f
+	st.b	r8++, r11
+	st.b	r8++, r11
+	bld	r10, 0
+	retcc	r12
+6:	st.b	r8++, r11
+	mov	pc, lr
+
+	/* Handle unaligned pointer */
+1:	sub	r10, 4
+	brlt	5b
+	add	r10, r9
+	lsl	r9, 1
+	add	pc, r9
+	st.b	r8++, r11
+	st.b	r8++, r11
+	st.b	r8++, r11
+	rjmp	2b
+
+	.size	memset, . - memset
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index cf0e3fd..844bbc9 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -504,7 +504,7 @@
 #endif
 
 #if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
-    defined(CONFIG_E500)
+    defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
 	bd->bi_immr_base = CFG_IMMR;	/* base  of IMMR register     */
 #endif
 #if defined(CONFIG_MPC5xxx)
@@ -805,7 +805,10 @@
 #endif	/* CFG_EXTBDINFO */
 
 	s = getenv ("ethaddr");
-#if defined (CONFIG_MBX) || defined (CONFIG_RPXCLASSIC) || defined(CONFIG_IAD210)
+#if defined (CONFIG_MBX) || \
+    defined (CONFIG_RPXCLASSIC) || \
+    defined(CONFIG_IAD210) || \
+    defined(CONFIG_V38B)
 	if (s == NULL)
 		board_get_enetaddr (bd->bi_enetaddr);
 	else
@@ -868,6 +871,10 @@
 	}
 #endif
 
+#ifdef CFG_ID_EEPROM
+	mac_read_from_eeprom();
+#endif
+
 #if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
     defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
 	load_sernum_ethaddr ();
diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile
index 897aa8b..a71f583 100644
--- a/nand_spl/board/amcc/sequoia/Makefile
+++ b/nand_spl/board/amcc/sequoia/Makefile
@@ -22,9 +22,9 @@
 #
 
 include $(TOPDIR)/config.mk
-include board/$(BOARDDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
 
-LDSCRIPT= board/$(BOARDDIR)/u-boot.lds
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
 LDFLAGS	= -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
 AFLAGS	+= -DCONFIG_NAND_SPL
 CFLAGS	+= -DCONFIG_NAND_SPL
@@ -32,49 +32,65 @@
 SOBJS	= start.o init.o resetvec.o
 COBJS	= nand_boot.o ndfc.o sdram.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS	:= $(SOBJS) $(COBJS)
+LNDIR	:= $(OBJTREE)/nand_spl/board/$(BOARDDIR)
 
-ALL	= u-boot-spl u-boot-spl.bin u-boot-spl-16k.bin
+nandobj	:= $(OBJTREE)/nand_spl/
+
+ALL	= $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
 
 all:	$(obj).depend $(ALL)
 
-u-boot-spl-16k.bin: u-boot-spl
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
 	$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
 
-u-boot-spl.bin:	u-boot-spl
+$(nandobj)u-boot-spl.bin:	$(nandobj)u-boot-spl
 	$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 
-u-boot-spl:	$(OBJS)
-	$(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
-		-Map u-boot-spl.map -o u-boot-spl
+$(nandobj)u-boot-spl:	$(OBJS)
+	cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
+		-Map $(nandobj)u-boot-spl.map \
+		-o $(nandobj)u-boot-spl
 
 # create symbolic links for common files
 
 # from cpu directory
-ndfc.c:
-	@rm -f ndfc.c
-	ln -s ../cpu/ppc4xx/ndfc.c ndfc.c
+$(obj)ndfc.c:
+	@rm -f $(obj)ndfc.c
+	ln -s $(SRCTREE)/cpu/ppc4xx/ndfc.c $(obj)ndfc.c
 
-resetvec.S:
-	@rm -f resetvec.S
-	ln -s ../cpu/ppc4xx/resetvec.S resetvec.S
+$(obj)resetvec.S:
+	@rm -f $(obj)resetvec.S
+	ln -s $(SRCTREE)/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
 
-start.S:
-	@rm -f start.S
-	ln -s ../cpu/ppc4xx/start.S start.S
+$(obj)start.S:
+	@rm -f $(obj)start.S
+	ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S
 
 # from board directory
-init.S:
-	@rm -f init.S
-	ln -s ../board/amcc/sequoia/init.S init.S
+$(obj)init.S:
+	@rm -f $(obj)init.S
+	ln -s $(SRCTREE)/board/amcc/sequoia/init.S $(obj)init.S
 
-sdram.c:
-	@rm -f sdram.c
-	ln -s ../board/amcc/sequoia/sdram.c sdram.c
+$(obj)sdram.c:
+	@rm -f $(obj)sdram.c
+	ln -s $(SRCTREE)/board/amcc/sequoia/sdram.c $(obj)sdram.c
+
+# from nand_spl directory
+$(obj)nand_boot.c:
+	@rm -f $(obj)nand_boot.c
+	ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
 
 #########################################################################
 
+$(obj)%.o:	$(obj)%.S
+	$(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o:	$(obj)%.c
+	$(CC) $(CFLAGS) -c -o $@ $<
+
 # defines $(obj).depend target
 include $(SRCTREE)/rules.mk
 
diff --git a/net/eth.c b/net/eth.c
index 6f48aac..e8ac251 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -196,6 +196,22 @@
 	tsec_initialize(bis, 3, CONFIG_MPC83XX_TSEC4_NAME);
 #    endif
 #endif
+#if defined(CONFIG_MPC86XX_TSEC1)
+       tsec_initialize(bis, 0, CONFIG_MPC86XX_TSEC1_NAME);
+#endif
+
+#if defined(CONFIG_MPC86XX_TSEC2)
+       tsec_initialize(bis, 1, CONFIG_MPC86XX_TSEC2_NAME);
+#endif
+
+#if defined(CONFIG_MPC86XX_TSEC3)
+       tsec_initialize(bis, 2, CONFIG_MPC86XX_TSEC3_NAME);
+#endif
+
+#if defined(CONFIG_MPC86XX_TSEC4)
+       tsec_initialize(bis, 3, CONFIG_MPC86XX_TSEC4_NAME);
+#endif
+
 #if defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
 	fec_initialize(bis);
 #endif
diff --git a/tools/mkimage.c b/tools/mkimage.c
index 5f3634d..416e658 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -131,6 +131,7 @@
     {	IH_TYPE_RAMDISK,    "ramdisk",	  "RAMDisk Image",	},
     {	IH_TYPE_SCRIPT,     "script",	  "Script",		},
     {	IH_TYPE_STANDALONE, "standalone", "Standalone Program", },
+    {	IH_TYPE_FLATDT,     "flat_dt",    "Flat Device Tree",	},
     {	-1,		    "",		  "",			},
 };