Initial revision
diff --git a/board/RPXlite/Makefile b/board/RPXlite/Makefile
new file mode 100644
index 0000000..ef173d0
--- /dev/null
+++ b/board/RPXlite/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/cogent/u-boot.lds b/board/cogent/u-boot.lds
new file mode 100644
index 0000000..c3474b4
--- /dev/null
+++ b/board/cogent/u-boot.lds
@@ -0,0 +1,121 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ *(.text)
+ common/environment.o(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+
diff --git a/board/esteem192e/Makefile b/board/esteem192e/Makefile
new file mode 100644
index 0000000..ef173d0
--- /dev/null
+++ b/board/esteem192e/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/etx094/Makefile b/board/etx094/Makefile
new file mode 100644
index 0000000..ef173d0
--- /dev/null
+++ b/board/etx094/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/fads/Makefile b/board/fads/Makefile
new file mode 100644
index 0000000..20a19b9
--- /dev/null
+++ b/board/fads/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o lamp.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/hermes/Makefile b/board/hermes/Makefile
new file mode 100644
index 0000000..ef173d0
--- /dev/null
+++ b/board/hermes/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/ip860/Makefile b/board/ip860/Makefile
new file mode 100644
index 0000000..ef173d0
--- /dev/null
+++ b/board/ip860/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/lwmon/Makefile b/board/lwmon/Makefile
new file mode 100644
index 0000000..35b8428
--- /dev/null
+++ b/board/lwmon/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/lwmon/u-boot.lds b/board/lwmon/u-boot.lds
new file mode 100644
index 0000000..6e5252c
--- /dev/null
+++ b/board/lwmon/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc8xx/start.o (.text)
+ common/environment.o(.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+
diff --git a/board/mbx8xx/Makefile b/board/mbx8xx/Makefile
new file mode 100644
index 0000000..f8fb581
--- /dev/null
+++ b/board/mbx8xx/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o vpd.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/mbx8xx/csr.h b/board/mbx8xx/csr.h
new file mode 100644
index 0000000..832e924
--- /dev/null
+++ b/board/mbx8xx/csr.h
@@ -0,0 +1,60 @@
+#ifndef __csr_h
+#define __csr_h
+
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Control and Status Register definitions for the MBX
+ *
+ *--------------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* bits for control register #1 / status register #1 */
+#define CSR1_ETEN 0x80 /* Ethernet Transceiver Enabled */
+#define CSR1_ELEN 0x40 /* Ethernet XCVR in Internal Loopback */
+#define CSR1_EAEN 0x20 /* Auto selection TP/AUI Enabled */
+#define CSR1_TPEN 0x10 /* TP manually selected */
+#define CSR1_FDDIS 0x08 /* Full Duplex Mode disabled */
+#define CSR1_FCTEN 0x04 /* Collision Testing of XCVR disabled */
+#define CSR1_COM1EN 0x02 /* COM1 signals routed to RS232 Transceiver */
+#define CSR1_XCVRDIS 0x01 /* Onboard RS232 Transceiver Disabled */
+
+/* bits for control register #2 */
+#define CR2_VDDSEL 0xC0 /* PCMCIA Supply Voltage */
+#define CR2_VPPSEL 0x30 /* PCMCIA Programming Voltage */
+#define CR2_BRDFAIL 0x08 /* Board fail */
+#define CR2_SWS1 0x04 /* Software Status #2 LED */
+#define CR2_SWS2 0x02 /* Software Status #2 LED */
+#define CR2_QSPANRST 0x01 /* Reset QSPAN */
+
+/* bits for status register #2 */
+#define SR2_VDDSEL 0xC0 /* PCMCIA Supply Voltage */
+#define SR2_VPPSEL 0x30 /* PCMCIA Programming Voltage */
+#define SR2_BATGD 0x08 /* Low Voltage indication for onboard bat */
+#define SR2_NVBATGD 0x04 /* Low Voltage indication for NVRAM */
+#define SR2_RDY 0x02 /* Flash programming status bit */
+#define SR2_FT 0x01 /* Reserved for Factory test purposes */
+
+#define MBX_CSR1 (*((uchar *)CFG_CSR_BASE))
+#define MBX_CSR2 (*((uchar *)CFG_CSR_BASE + 1))
+
+#endif /* __csr_h */
diff --git a/board/mbx8xx/dimm.h b/board/mbx8xx/dimm.h
new file mode 100644
index 0000000..b40f112
--- /dev/null
+++ b/board/mbx8xx/dimm.h
@@ -0,0 +1,98 @@
+#ifndef __dimm_h
+#define __dimm_h
+
+/*
+ * Module name: %M%
+ * Description:
+ * Serial Presence Detect Definitions Module
+ * SCCS identification: %I%
+ * Branch: %B%
+ * Sequence: %S%
+ * Date newest applied delta was created (MM/DD/YY): %G%
+ * Time newest applied delta was created (HH:MM:SS): %U%
+ * SCCS file name %F%
+ * Fully qualified SCCS file name:
+ * %P%
+ * Copyright:
+ * (C) COPYRIGHT MOTOROLA, INC. 1996
+ * ALL RIGHTS RESERVED
+ * Notes:
+ * 1. All data was taken from an IBM application note titled
+ * "Serial Presence Detect Definitions".
+ * History:
+ * Date Who
+ *
+ * 10/24/96 Rob Baxter
+ * Initial release.
+ *
+ */
+
+/*
+ * serial PD byte assignment address map (256 byte EEPROM)
+ */
+typedef struct dimm
+{
+ uchar n_bytes; /* 00 number of bytes written/used */
+ uchar t_bytes; /* 01 total number of bytes in serial PD device */
+ uchar fmt; /* 02 fundamental memory type (FPM/EDO/SDRAM) */
+ uchar n_row; /* 03 number of rows */
+ uchar n_col; /* 04 number of columns */
+ uchar n_banks; /* 05 number of banks */
+ uchar data_w_lo; /* 06 data width */
+ uchar data_w_hi; /* 07 data width */
+ uchar ifl; /* 08 interface levels */
+ uchar a_ras; /* 09 RAS access */
+ uchar a_cas; /* 0A CAS access */
+ uchar ct; /* 0B configuration type (non-parity/parity/ECC) */
+ uchar refresh_rt; /* 0C refresh rate/type */
+ uchar p_dram_o; /* 0D primary DRAM organization */
+ uchar s_dram_o; /* 0E secondary DRAM organization (parity/ECC-checkbits) */
+ uchar reserved[17]; /* 0F reserved fields for future offerings */
+ uchar ss_info[32]; /* 20 superset information (may be used in the future) */
+ uchar m_info[64]; /* 40 manufacturer information (optional) */
+ uchar unused[128]; /* 80 unused storage locations */
+} dimm_t;
+
+/*
+ * memory type definitions
+ */
+#define DIMM_MT_FPM 1 /* standard FPM (fast page mode) DRAM */
+#define DIMM_MT_EDO 2 /* EDO (extended data out) */
+#define DIMM_MT_PN 3 /* pipelined nibble */
+#define DIMM_MT_SDRAM 4 /* SDRAM (synchronous DRAM) */
+
+/*
+ * row addresses definitions
+ */
+#define DIMM_RA_RDNDNT (1<<7) /* redundant addressing */
+#define DIMM_RA_MASK 0x7f /* number of row addresses mask */
+
+/*
+ * module interface levels definitions
+ */
+#define DIMM_IFL_TTL 0 /* TTL/5V tolerant */
+#define DIMM_IFL_LVTTL 1 /* LVTTL (not 5V tolerant) */
+#define DIMM_IFL_HSTL15 2 /* HSTL 1.5 */
+#define DIMM_IFL_SSTL33 3 /* SSTL 3.3 */
+#define DIMM_IFL_SSTL25 4 /* SSTL 2.5 */
+
+/*
+ * DIMM configuration type definitions
+ */
+#define DIMM_CT_NONE 0 /* none */
+#define DIMM_CT_PARITY 1 /* parity */
+#define DIMM_CT_ECC 2 /* ECC */
+
+/*
+ * row addresses definitions
+ */
+#define DIMM_RRT_SR (1<<7) /* self refresh flag */
+#define DIMM_RRT_MASK 0x7f /* refresh rate mask */
+#define DIMM_RRT_NRML 0x00 /* normal (15.625us) */
+#define DIMM_RRT_R_3_9 0x01 /* reduced .25x (3.9us) */
+#define DIMM_RRT_R_7_8 0x02 /* reduced .5x (7.8us) */
+#define DIMM_RRT_E_31_3 0x03 /* extended 2x (31.3us) */
+#define DIMM_RRT_E_62_5 0x04 /* extended 4x (62.5us) */
+#define DIMM_RRT_E_125 0x05 /* extended 8x (125us) */
+
+#endif /* __dimm_h */
diff --git a/board/mbx8xx/u-boot.lds b/board/mbx8xx/u-boot.lds
new file mode 100644
index 0000000..d647be3
--- /dev/null
+++ b/board/mbx8xx/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc8xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+
diff --git a/board/mbx8xx/vpd.h b/board/mbx8xx/vpd.h
new file mode 100644
index 0000000..1d9eb7f
--- /dev/null
+++ b/board/mbx8xx/vpd.h
@@ -0,0 +1,119 @@
+#ifndef __vpd_h
+#define __vpd_h
+
+/*
+ * Module name: %M%
+ * Description:
+ * Vital Product Data (VPD) Header Module
+ * SCCS identification: %I%
+ * Branch: %B%
+ * Sequence: %S%
+ * Date newest applied delta was created (MM/DD/YY): %G%
+ * Time newest applied delta was created (HH:MM:SS): %U%
+ * SCCS file name %F%
+ * Fully qualified SCCS file name:
+ * %P%
+ * Copyright:
+ * (C) COPYRIGHT MOTOROLA, INC. 1996
+ * ALL RIGHTS RESERVED
+ * Notes:
+ * History:
+ * Date Who
+ *
+ * 10/24/96 Rob Baxter
+ * Initial release.
+ *
+ */
+
+#define VPD_EEPROM_SIZE 256 /* EEPROM size in bytes */
+
+/*
+ * packet tuple identifiers
+ *
+ * 0x0D - 0xBF reserved
+ * 0xC0 - 0xFE user defined
+ */
+#define VPD_PID_GI 0x00 /* guaranteed illegal */
+#define VPD_PID_PID 0x01 /* product identifier (ASCII) */
+#define VPD_PID_FAN 0x02 /* factory assembly-number (ASCII) */
+#define VPD_PID_SN 0x03 /* serial-number (ASCII) */
+#define VPD_PID_PCO 0x04 /* product configuration options(binary) */
+#define VPD_PID_ICS 0x05 /* internal clock speed in HZ (integer) */
+#define VPD_PID_ECS 0x06 /* external clock speed in HZ (integer) */
+#define VPD_PID_RCS 0x07 /* reference clock speed in HZ(integer) */
+#define VPD_PID_EA 0x08 /* ethernet address (binary) */
+#define VPD_PID_MT 0x09 /* microprocessor type (ASCII) */
+#define VPD_PID_CRC 0x0A /* EEPROM CRC (integer) */
+#define VPD_PID_FMC 0x0B /* FLASH memory configuration (binary) */
+#define VPD_PID_VLSI 0x0C /* VLSI revisions/versions (binary) */
+#define VPD_PID_TERM 0xFF /* termination */
+
+/*
+ * VPD structure (format)
+ */
+#define VPD_EYE_SIZE 8 /* eyecatcher size */
+typedef struct vpd_header
+{
+ uchar eyecatcher[VPD_EYE_SIZE]; /* eyecatcher - "MOTOROLA" */
+ ushort size; /* size of EEPROM */
+} vpd_header_t;
+
+#define VPD_DATA_SIZE (VPD_EEPROM_SIZE-sizeof(vpd_header_t))
+typedef struct vpd
+{
+ vpd_header_t header; /* header */
+ uchar packets[VPD_DATA_SIZE]; /* data */
+} vpd_t;
+
+/*
+ * packet tuple structure (format)
+ */
+typedef struct vpd_packet
+{
+ uchar identifier; /* identifier (PIDs above) */
+ uchar size; /* size of the following data area */
+ uchar data[1]; /* data (size is dependent upon PID) */
+} vpd_packet_t;
+
+/*
+ * MBX product configuration options bit definitions
+ *
+ * Notes:
+ * 1. The bit numbering is reversed in perspective with the C compiler.
+ */
+#define PCO_BBRAM (1<<0) /* battery-backed RAM (BBRAM) and socket */
+#define PCO_BOOTROM (1<<1) /* boot ROM and socket (i.e., socketed FLASH) */
+#define PCO_KAPWR (1<<2) /* keep alive power source (lithium battey) and control circuit */
+#define PCO_ENET_TP (1<<3) /* ethernet twisted pair (TP) connector (RJ45) */
+#define PCO_ENET_AUI (1<<4) /* ethernet attachment unit interface (AUI) header */
+#define PCO_PCMCIA (1<<5) /* PCMCIA socket */
+#define PCO_DIMM (1<<6) /* DIMM module socket */
+#define PCO_DTT (1<<7) /* digital thermometer and thermostat (DTT) device */
+#define PCO_LCD (1<<8) /* liquid crystal display (LCD) device */
+#define PCO_PCI (1<<9) /* PCI-Bus bridge device (QSpan) and ISA-Bus bridge device (Winbond) */
+#define PCO_PCIO (1<<10) /* PC I/O (COM1, COM2, FDC, LPT, Keyboard/Mouse) */
+#define PCO_EIDE (1<<11) /* enhanced IDE (EIDE) header */
+#define PCO_FDC (1<<12) /* floppy disk controller (FDC) header */
+#define PCO_LPT_8XX (1<<13) /* parallel port header via MPC8xx */
+#define PCO_LPT_PCIO (1<<14) /* parallel port header via PC I/O */
+
+/*
+ * FLASH memory configuration packet data
+ */
+typedef struct vpd_fmc
+{
+ ushort mid; /* manufacturer's idenitfier */
+ ushort did; /* manufacturer's device idenitfier */
+ uchar ddw; /* device data width (e.g., 8-bits, 16-bits) */
+ uchar nod; /* number of devices present */
+ uchar noc; /* number of columns */
+ uchar cw; /* column width in bits */
+ uchar wedw; /* write/erase data width */
+} vpd_fmc_t;
+
+/* function prototypes */
+extern void vpd_init(void);
+extern int vpd_read(uint iic_device, uchar *buf, int count, int offset);
+extern vpd_packet_t *vpd_find_packet(u_char ident);
+
+#endif /* __vpd_h */
diff --git a/board/rpxsuper/u-boot.lds b/board/rpxsuper/u-boot.lds
new file mode 100644
index 0000000..1572aca
--- /dev/null
+++ b/board/rpxsuper/u-boot.lds
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc8260/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+
diff --git a/board/rsdproto/flash_asm.S b/board/rsdproto/flash_asm.S
new file mode 100644
index 0000000..c65fb87
--- /dev/null
+++ b/board/rsdproto/flash_asm.S
@@ -0,0 +1,39 @@
+/*
+ * -*- mode:c -*-
+ *
+ * (C) Copyright 2000
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ *
+ * void ull_write(unsigned long long volatile *address,
+ * unsigned long long volatile *data)
+ * r3 = address
+ * r4 = data
+ *
+ * void ull_read(unsigned long long volatile *address,
+ * unsigned long long volatile *data)
+ * r3 = address
+ * r4 = data
+ *
+ * Uses the floating point unit to read and write 64 bit wide
+ * data (unsigned long long) on the 60x bus. This is necessary
+ * because all 4 flash chips use the /WE line from byte lane 0
+ *
+ * IMPORTANT: data should always be 8-aligned, otherwise an exception will
+ * occur.
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+.globl ull_write
+ull_write:
+ lfd 0,0(r4)
+ stfd 0,0(r3)
+ blr
+
+ .globl ull_read
+ull_read:
+ lfd 0, 0(r3)
+ stfd 0, 0(r4)
+ blr
diff --git a/board/rsdproto/u-boot.lds b/board/rsdproto/u-boot.lds
new file mode 100644
index 0000000..7425be6
--- /dev/null
+++ b/board/rsdproto/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc8260/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ /*. = env_offset; */
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+
diff --git a/board/sandpoint/speed.h b/board/sandpoint/speed.h
new file mode 100644
index 0000000..b66393b
--- /dev/null
+++ b/board/sandpoint/speed.h
@@ -0,0 +1,54 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*-----------------------------------------------------------------------
+ * Timer value for timer 2, ICLK = 10
+ *
+ * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1))
+ * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1
+ *
+ * SPEED_FCOUNT2 timer 2 counting frequency
+ * GCLK CPU clock
+ * SPEED_TMR2_PS prescaler
+ */
+#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
+
+/*-----------------------------------------------------------------------
+ * Timer value for PIT
+ *
+ * PIT_TIME = SPEED_PITC / PITRTCLK
+ * PITRTCLK = 8192
+ */
+#define SPEED_PITC (82 << 16) /* start counting from 82 */
+
+/*
+ * The new value for PTA is calculated from
+ *
+ * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS)
+ *
+ * gclk CPU clock (not bus clock !)
+ * Trefresh Refresh cycle * 4 (four word bursts used)
+ * DFBRG For normal mode (no clock reduction) always 0
+ * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh)
+ * NCS Number of SDRAM banks (chip selects) on this UPM.
+ */
diff --git a/board/sbc8260/u-boot.lds b/board/sbc8260/u-boot.lds
new file mode 100644
index 0000000..1572aca
--- /dev/null
+++ b/board/sbc8260/u-boot.lds
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc8260/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+
diff --git a/board/sixnet/Makefile b/board/sixnet/Makefile
new file mode 100644
index 0000000..ef173d0
--- /dev/null
+++ b/board/sixnet/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/sixnet/u-boot.lds b/board/sixnet/u-boot.lds
new file mode 100644
index 0000000..25a170b
--- /dev/null
+++ b/board/sixnet/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc8xx/start.o (.text)
+ common/environment.o(.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+
diff --git a/board/spd8xx/Makefile b/board/spd8xx/Makefile
new file mode 100644
index 0000000..ef173d0
--- /dev/null
+++ b/board/spd8xx/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds
new file mode 100644
index 0000000..27da78c
--- /dev/null
+++ b/board/spd8xx/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc8xx/start.o (.text)
+ common/environment.o(.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+
diff --git a/cpu/mpc8260/speed.h b/cpu/mpc8260/speed.h
new file mode 100644
index 0000000..b66393b
--- /dev/null
+++ b/cpu/mpc8260/speed.h
@@ -0,0 +1,54 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*-----------------------------------------------------------------------
+ * Timer value for timer 2, ICLK = 10
+ *
+ * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1))
+ * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1
+ *
+ * SPEED_FCOUNT2 timer 2 counting frequency
+ * GCLK CPU clock
+ * SPEED_TMR2_PS prescaler
+ */
+#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
+
+/*-----------------------------------------------------------------------
+ * Timer value for PIT
+ *
+ * PIT_TIME = SPEED_PITC / PITRTCLK
+ * PITRTCLK = 8192
+ */
+#define SPEED_PITC (82 << 16) /* start counting from 82 */
+
+/*
+ * The new value for PTA is calculated from
+ *
+ * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS)
+ *
+ * gclk CPU clock (not bus clock !)
+ * Trefresh Refresh cycle * 4 (four word bursts used)
+ * DFBRG For normal mode (no clock reduction) always 0
+ * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh)
+ * NCS Number of SDRAM banks (chip selects) on this UPM.
+ */
diff --git a/include/405_mal.h b/include/405_mal.h
new file mode 100644
index 0000000..459924b
--- /dev/null
+++ b/include/405_mal.h
@@ -0,0 +1,106 @@
+/* include/mal.h, openbios_walnut, walnut_bios 8/6/99 08:48:40 */
+/*----------------------------------------------------------------------------+
+|
+| This source code has been made available to you by IBM on an AS-IS
+| basis. Anyone receiving this source is licensed under IBM
+| copyrights to use it in any way he or she deems fit, including
+| copying it, modifying it, compiling it, and redistributing it either
+| with or without modifications. No license under IBM patents or
+| patent applications is to be implied by the copyright license.
+|
+| Any user of this software should understand that IBM cannot provide
+| technical support for this software and will not be responsible for
+| any consequences resulting from the use of this software.
+|
+| Any person who transfers this source code or any derivative work
+| must include the IBM copyright notice, this paragraph, and the
+| preceding two paragraphs in the transferred software.
+|
+| COPYRIGHT I B M CORPORATION 1999
+| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
++----------------------------------------------------------------------------*/
+/*----------------------------------------------------------------------------+
+|
+| File Name: mal.h
+|
+| Function: Header file for the MAL (MADMAL) macro on the 405GP.
+|
+| Author: Mark Wisner
+|
+| Change Activity-
+|
+| Date Description of Change BY
+| --------- --------------------- ---
+| 29-Apr-99 Created MKW
+|
++----------------------------------------------------------------------------*/
+#ifndef _mal_h_
+#define _mal_h_
+/* MADMAL transmit and receive status/control bits */
+/* for COMMAC bits, refer to the COMMAC header file */
+
+#define MAL_TX_CTRL_READY 0x8000
+#define MAL_TX_CTRL_WRAP 0x4000
+#define MAL_TX_CTRL_CM 0x2000
+#define MAL_TX_CTRL_LAST 0x1000
+#define MAL_TX_CTRL_INTR 0x0400
+
+#define MAL_RX_CTRL_EMPTY 0x8000
+#define MAL_RX_CTRL_WRAP 0x4000
+#define MAL_RX_CTRL_CM 0x2000
+#define MAL_RX_CTRL_LAST 0x1000
+#define MAL_RX_CTRL_FIRST 0x0800
+#define MAL_RX_CTRL_INTR 0x0400
+
+ /* Configuration Reg */
+#define MAL_CR_MMSR 0x80000000
+#define MAL_CR_PLBP_1 0x00400000 /* lowsest is 00 */
+#define MAL_CR_PLBP_2 0x00800000
+#define MAL_CR_PLBP_3 0x00C00000 /* highest */
+#define MAL_CR_GA 0x00200000
+#define MAL_CR_OA 0x00100000
+#define MAL_CR_PLBLE 0x00080000
+#define MAL_CR_PLBLT_1 0x00040000
+#define MAL_CR_PLBLT_2 0x00020000
+#define MAL_CR_PLBLT_3 0x00010000
+#define MAL_CR_PLBLT_4 0x00008000
+#define MAL_CR_PLBLT_DEFAULT 0x00078000 /* ????? */
+#define MAL_CR_PLBB 0x00004000
+#define MAL_CR_OPBBL 0x00000080
+#define MAL_CR_EOPIE 0x00000004
+#define MAL_CR_LEA 0x00000002
+#define MAL_CR_MSD 0x00000001
+
+ /* Error Status Reg */
+#define MAL_ESR_EVB 0x80000000
+#define MAL_ESR_CID 0x40000000
+#define MAL_ESR_DE 0x00100000
+#define MAL_ESR_ONE 0x00080000
+#define MAL_ESR_OTE 0x00040000
+#define MAL_ESR_OSE 0x00020000
+#define MAL_ESR_PEIN 0x00010000
+ /* same bit position as the IER */
+ /* VV VV */
+#define MAL_ESR_DEI 0x00000010
+#define MAL_ESR_ONEI 0x00000008
+#define MAL_ESR_OTEI 0x00000004
+#define MAL_ESR_OSEI 0x00000002
+#define MAL_ESR_PBEI 0x00000001
+ /* ^^ ^^ */
+ /* Mal IER */
+#define MAL_IER_DE 0x00000010
+#define MAL_IER_NE 0x00000008
+#define MAL_IER_TE 0x00000004
+#define MAL_IER_OPBE 0x00000002
+#define MAL_IER_PLBE 0x00000001
+
+
+/* MAL Buffer Descriptor structure */
+typedef struct {
+ short ctrl; /* MAL / Commac status control bits */
+ short data_len; /* Max length is 4K-1 (12 bits) */
+ char *data_ptr; /* pointer to actual data buffer */
+} mal_desc_t;
+
+#endif
+
diff --git a/include/asm-ppc/atomic.h b/include/asm-ppc/atomic.h
new file mode 100644
index 0000000..23f22df
--- /dev/null
+++ b/include/asm-ppc/atomic.h
@@ -0,0 +1,95 @@
+/*
+ * PowerPC atomic operations
+ */
+
+#ifndef _ASM_PPC_ATOMIC_H_
+#define _ASM_PPC_ATOMIC_H_
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SMP
+typedef struct { volatile int counter; } atomic_t;
+#else
+typedef struct { int counter; } atomic_t;
+#endif
+
+#define ATOMIC_INIT(i) { (i) }
+
+#define atomic_read(v) ((v)->counter)
+#define atomic_set(v,i) (((v)->counter) = (i))
+
+extern void atomic_clear_mask(unsigned long mask, unsigned long *addr);
+extern void atomic_set_mask(unsigned long mask, unsigned long *addr);
+
+extern __inline__ int atomic_add_return(int a, atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__("\n\
+1: lwarx %0,0,%3\n\
+ add %0,%2,%0\n\
+ stwcx. %0,0,%3\n\
+ bne- 1b"
+ : "=&r" (t), "=m" (*v)
+ : "r" (a), "r" (v), "m" (*v)
+ : "cc");
+
+ return t;
+}
+
+extern __inline__ int atomic_sub_return(int a, atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__("\n\
+1: lwarx %0,0,%3\n\
+ subf %0,%2,%0\n\
+ stwcx. %0,0,%3\n\
+ bne- 1b"
+ : "=&r" (t), "=m" (*v)
+ : "r" (a), "r" (v), "m" (*v)
+ : "cc");
+
+ return t;
+}
+
+extern __inline__ int atomic_inc_return(atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__("\n\
+1: lwarx %0,0,%2\n\
+ addic %0,%0,1\n\
+ stwcx. %0,0,%2\n\
+ bne- 1b"
+ : "=&r" (t), "=m" (*v)
+ : "r" (v), "m" (*v)
+ : "cc");
+
+ return t;
+}
+
+extern __inline__ int atomic_dec_return(atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__("\n\
+1: lwarx %0,0,%2\n\
+ addic %0,%0,-1\n\
+ stwcx. %0,0,%2\n\
+ bne 1b"
+ : "=&r" (t), "=m" (*v)
+ : "r" (v), "m" (*v)
+ : "cc");
+
+ return t;
+}
+
+#define atomic_add(a, v) ((void) atomic_add_return((a), (v)))
+#define atomic_sub(a, v) ((void) atomic_sub_return((a), (v)))
+#define atomic_sub_and_test(a, v) (atomic_sub_return((a), (v)) == 0)
+#define atomic_inc(v) ((void) atomic_inc_return((v)))
+#define atomic_dec(v) ((void) atomic_dec_return((v)))
+#define atomic_dec_and_test(v) (atomic_dec_return((v)) == 0)
+
+#endif /* _ASM_PPC_ATOMIC_H_ */
diff --git a/include/asm-ppc/posix_types.h b/include/asm-ppc/posix_types.h
new file mode 100644
index 0000000..9170728
--- /dev/null
+++ b/include/asm-ppc/posix_types.h
@@ -0,0 +1,109 @@
+#ifndef _PPC_POSIX_TYPES_H
+#define _PPC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned int __kernel_dev_t;
+typedef unsigned int __kernel_ino_t;
+typedef unsigned int __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned int __kernel_uid_t;
+typedef unsigned int __kernel_gid_t;
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned int __kernel_old_uid_t;
+typedef unsigned int __kernel_old_gid_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+ int val[2];
+} __kernel_fsid_t;
+
+#ifndef __GNUC__
+
+#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+#define __FD_ZERO(set) \
+ ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+
+#else /* __GNUC__ */
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \
+ || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+ unsigned int *tmp = (unsigned int *)p->fds_bits;
+ int i;
+
+ if (__builtin_constant_p(__FDSET_LONGS)) {
+ switch (__FDSET_LONGS) {
+ case 8:
+ tmp[0] = 0; tmp[1] = 0; tmp[2] = 0; tmp[3] = 0;
+ tmp[4] = 0; tmp[5] = 0; tmp[6] = 0; tmp[7] = 0;
+ return;
+ }
+ }
+ i = __FDSET_LONGS;
+ while (i) {
+ i--;
+ *tmp = 0;
+ tmp++;
+ }
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* __GNUC__ */
+#endif /* _PPC_POSIX_TYPES_H */
diff --git a/include/asm-ppc/signal.h b/include/asm-ppc/signal.h
new file mode 100644
index 0000000..b11a28e
--- /dev/null
+++ b/include/asm-ppc/signal.h
@@ -0,0 +1,154 @@
+#ifndef _ASMPPC_SIGNAL_H
+#define _ASMPPC_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX (_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER 0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE SA_ONESHOT
+#define SA_SAMPLE_RANDOM SA_RESTART
+#define SA_SHIRQ 0x04000000
+#endif
+
+#define SIG_BLOCK 0 /* for blocking signals */
+#define SIG_UNBLOCK 1 /* for unblocking signals */
+#define SIG_SETMASK 2 /* for setting the signal mask */
+
+/* Type of a signal handler. */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
+#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
+#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
+
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+ void *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#endif
+
+#endif
diff --git a/include/linux/posix_types.h b/include/linux/posix_types.h
new file mode 100644
index 0000000..bd37e1f
--- /dev/null
+++ b/include/linux/posix_types.h
@@ -0,0 +1,48 @@
+#ifndef _LINUX_POSIX_TYPES_H
+#define _LINUX_POSIX_TYPES_H
+
+#include <linux/stddef.h>
+
+/*
+ * This allows for 1024 file descriptors: if NR_OPEN is ever grown
+ * beyond that you'll have to change this too. But 1024 fd's seem to be
+ * enough even for such "real" unices like OSF/1, so hopefully this is
+ * one limit that doesn't have to be changed [again].
+ *
+ * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in
+ * <sys/time.h> (and thus <linux/time.h>) - but this is a more logical
+ * place for them. Solved by having dummy defines in <sys/time.h>.
+ */
+
+/*
+ * Those macros may have been defined in <gnu/types.h>. But we always
+ * use the ones here.
+ */
+#undef __NFDBITS
+#define __NFDBITS (8 * sizeof(unsigned long))
+
+#undef __FD_SETSIZE
+#define __FD_SETSIZE 1024
+
+#undef __FDSET_LONGS
+#define __FDSET_LONGS (__FD_SETSIZE/__NFDBITS)
+
+#undef __FDELT
+#define __FDELT(d) ((d) / __NFDBITS)
+
+#undef __FDMASK
+#define __FDMASK(d) (1UL << ((d) % __NFDBITS))
+
+typedef struct {
+ unsigned long fds_bits [__FDSET_LONGS];
+} __kernel_fd_set;
+
+/* Type of a signal handler. */
+typedef void (*__kernel_sighandler_t)(int);
+
+/* Type of a SYSV IPC key. */
+typedef int __kernel_key_t;
+
+#include <asm/posix_types.h>
+
+#endif /* _LINUX_POSIX_TYPES_H */
diff --git a/include/mpc8xx_irq.h b/include/mpc8xx_irq.h
new file mode 100644
index 0000000..d2a81c0
--- /dev/null
+++ b/include/mpc8xx_irq.h
@@ -0,0 +1,59 @@
+#ifndef _MPC8XX_IRQ_H
+#define _MPC8XX_IRQ_H
+
+/* The MPC8xx cores have 16 possible interrupts. There are eight
+ * possible level sensitive interrupts assigned and generated internally
+ * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
+ * There are eight external interrupts (IRQs) that can be configured
+ * as either level or edge sensitive.
+ *
+ * On some implementations, there is also the possibility of an 8259
+ * through the PCI and PCI-ISA bridges.
+ *
+ * We don't support the 8259 (yet).
+ */
+#define NR_SIU_INTS 16
+#define NR_8259_INTS 0
+
+#define NR_IRQS (NR_SIU_INTS + NR_8259_INTS)
+
+/* These values must be zero-based and map 1:1 with the SIU configuration.
+ * They are used throughout the 8xx I/O subsystem to generate
+ * interrupt masks, flags, and other control patterns. This is why the
+ * current kernel assumption of the 8259 as the base controller is such
+ * a pain in the butt.
+ */
+#define SIU_IRQ0 (0) /* Highest priority */
+#define SIU_LEVEL0 (1)
+#define SIU_IRQ1 (2)
+#define SIU_LEVEL1 (3)
+#define SIU_IRQ2 (4)
+#define SIU_LEVEL2 (5)
+#define SIU_IRQ3 (6)
+#define SIU_LEVEL3 (7)
+#define SIU_IRQ4 (8)
+#define SIU_LEVEL4 (9)
+#define SIU_IRQ5 (10)
+#define SIU_LEVEL5 (11)
+#define SIU_IRQ6 (12)
+#define SIU_LEVEL6 (13)
+#define SIU_IRQ7 (14)
+#define SIU_LEVEL7 (15)
+
+/* The internal interrupts we can configure as we see fit.
+ * My personal preference is CPM at level 2, which puts it above the
+ * MBX PCI/ISA/IDE interrupts.
+ */
+
+#ifdef CFG_CPM_INTERRUPT
+# define CPM_INTERRUPT CFG_CPM_INTERRUPT
+#else
+# define CPM_INTERRUPT SIU_LEVEL2
+#endif
+
+/* Some internal interrupt registers use an 8-bit mask for the interrupt
+ * level instead of a number.
+ */
+#define mk_int_int_mask(IL) (1 << (7 - (IL/2)))
+
+#endif /* _MPC8XX_IRQ_H */
diff --git a/include/s_record.h b/include/s_record.h
new file mode 100644
index 0000000..07806d5
--- /dev/null
+++ b/include/s_record.h
@@ -0,0 +1,114 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*--------------------------------------------------------------------------
+ *
+ * Motorola S-Record Format:
+ *
+ * Motorola S-Records are an industry-standard format for
+ * transmitting binary files to target systems and PROM
+ * programmers. LSI Logic have extended this standard to include
+ * an S4-record containing an address and a symbol.
+ *
+ * The extended S-record standard is as follows:
+ *
+ * S<type><length><address><data....><checksum>
+ * S4<length><address><name>,<checksum>
+ *
+ * Where:
+ *
+ * type
+ * is the record type. Where:
+ *
+ * 0 starting record (optional)
+ * 1 data record with 16-bit address
+ * 2 data record with 24-bit address
+ * 3 data record with 32-bit address
+ * 4 symbol record (LSI extension)
+ * 5 number of data records in preceeding block
+ * 6 unused
+ * 7 ending record for S3 records
+ * 8 ending record for S2 records
+ * 9 ending record for S1 records
+ *
+ * length
+ * is two hex characters. This defines the length of the
+ * record in bytes (not characters). It includes the address
+ * field, the data field, and the checksum field.
+ *
+ * address
+ * is 4, 6, or 8 characters. Corresponding to a 16-, 24-, or
+ * 32-bit address. The address field for S4 records is
+ * always 32 bits.
+ *
+ * data
+ *
+ * Are the data bytes. Each pair of hex characters represent
+ * one byte in memory.
+ *
+ * name
+ * Is the symbol name. The symbol is terminated by a ','.
+ *
+ * checksum
+ * Is the one's complement of the 8-bit checksum.
+ *
+ * Example
+ *
+ * S0030000FC
+ * .
+ * .
+ * S325000004403C0880018D08DD900000000011000026000000003C0880012508DC50C50000B401
+ * S32500000460C50100B8C50200BCC50300C0C50400C4C50500C8C50600CCC50700D0C50800D4FA
+ * S32500000480C50900D8C50A00DCC50B00E0C50C00E4C50D00E8C50E00ECC50F00F0C51000F49A
+ * S325000004A0C51100F8C51200FCC5130100C5140104C5150108C516010CC5170110C518011434
+ * .
+ * .
+ * S70500000000FA
+ *
+ * The S0 record starts the file. The S3 records contain the
+ * data. The S7 record contains the entry address and terminates
+ * the download.
+ *
+ *--------------------------------------------------------------------------
+ */
+
+#define SREC_START 0 /* Start Record (module name) */
+#define SREC_DATA2 1 /* Data Record with 2 byte address */
+#define SREC_DATA3 2 /* Data Record with 3 byte address */
+#define SREC_DATA4 3 /* Data Record with 4 byte address */
+#define SREC_COUNT 5 /* Count Record (previously transmitted) */
+#define SREC_END4 7 /* End Record with 4 byte start address */
+#define SREC_END3 8 /* End Record with 3 byte start address */
+#define SREC_END2 9 /* End Record with 2 byte start address */
+#define SREC_EMPTY 10 /* Empty Record without any data */
+
+#define SREC_REC_OK SREC_EMPTY /* last code without error condition */
+
+#define SREC_E_BADTYPE -1 /* no valid S-Record */
+#define SREC_E_NOSREC -2 /* line format differs from s-record */
+#define SREC_E_BADCHKS -3 /* checksum error in an s-record line */
+
+#define SREC_MAXRECLEN (512 + 4) /* max ASCII record length */
+#define SREC_MAXBINLEN 255 /* resulting binary length */
+
+int srec_decode (char *input, int *count, ulong *addr, char *data);
diff --git a/include/zlib.h b/include/zlib.h
new file mode 100644
index 0000000..6958ab8
--- /dev/null
+++ b/include/zlib.h
@@ -0,0 +1,434 @@
+/*
+ * This file is derived from zlib.h and zconf.h from the zlib-0.95
+ * distribution by Jean-loup Gailly and Mark Adler, with some additions
+ * by Paul Mackerras to aid in implementing Deflate compression and
+ * decompression for PPP packets.
+ */
+
+/*
+ * ==FILEVERSION 960122==
+ *
+ * This marker is used by the Linux installation script to determine
+ * whether an up-to-date version of this file is already installed.
+ */
+
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+ version 0.95, Aug 16th, 1995.
+
+ Copyright (C) 1995 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ gzip@prep.ai.mit.edu madler@alumni.caltech.edu
+ */
+
+#ifndef _ZLIB_H
+#define _ZLIB_H
+
+/* #include "zconf.h" */ /* included directly here */
+
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
+
+/*
+ The library does not install any signal handler. It is recommended to
+ add at least a handler for SIGSEGV when decompressing; the library checks
+ the consistency of the input data whenever possible but may go nuts
+ for some forms of corrupted input.
+ */
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
+ * at addresses which are not a multiple of their size.
+ * Under DOS, -DFAR=far or -DFAR=__far may be needed.
+ */
+
+#ifndef STDC
+# if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
+# define STDC
+# endif
+#endif
+
+#ifdef __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
+# include <unix.h>
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+# ifdef MAXSEG_64K
+# define MAX_MEM_LEVEL 8
+# else
+# define MAX_MEM_LEVEL 9
+# endif
+#endif
+
+#ifndef FAR
+# define FAR
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
+#ifndef MAX_WBITS
+# define MAX_WBITS 15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+ 1 << (windowBits+2) + 1 << (memLevel+9)
+ that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+ make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+ The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+ /* Type declarations */
+
+#ifndef OF /* function prototypes */
+# ifdef STDC
+# define OF(args) args
+# else
+# define OF(args) ()
+# endif
+#endif
+
+typedef unsigned char Byte; /* 8 bits */
+typedef unsigned int uInt; /* 16 bits or more */
+typedef unsigned long uLong; /* 32 bits or more */
+
+typedef Byte FAR Bytef;
+typedef char FAR charf;
+typedef int FAR intf;
+typedef uInt FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+ typedef void FAR *voidpf;
+ typedef void *voidp;
+#else
+ typedef Byte FAR *voidpf;
+ typedef Byte *voidp;
+#endif
+
+/* end of original zconf.h */
+
+#define ZLIB_VERSION "0.95P"
+
+/*
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed
+ data. This version of the library supports only one compression method
+ (deflation) but other algorithms may be added later and will have the same
+ stream interface.
+
+ For compression the application must provide the output buffer and
+ may optionally provide the input buffer for optimization. For decompression,
+ the application must provide the input buffer and may optionally provide
+ the output buffer for optimization.
+
+ Compression can be done in a single step if the buffers are large
+ enough (for example if an input file is mmap'ed), or can be done by
+ repeated calls of the compression function. In the latter case, the
+ application must provide more input and/or consume the output
+ (providing more output space) before each call.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt nbytes));
+
+typedef void (*cb_func) OF((Bytef *buf, uInt len));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+ Bytef *next_in; /* next input byte */
+ uInt avail_in; /* number of bytes available at next_in */
+ uLong total_in; /* total nb of input bytes read so far */
+
+ Bytef *next_out; /* next output byte should be put there */
+ uInt avail_out; /* remaining free space at next_out */
+ uLong total_out; /* total nb of bytes output so far */
+
+ char *msg; /* last error message, NULL if no error */
+ struct internal_state FAR *state; /* not visible by applications */
+
+ alloc_func zalloc; /* used to allocate the internal state */
+ free_func zfree; /* used to free the internal state */
+ voidp opaque; /* private data object passed to zalloc and zfree */
+
+ Byte data_type; /* best guess about the data type: ascii or binary */
+
+ cb_func outcb; /* called regularly just before blocks of output */
+
+} z_stream;
+
+/*
+ The application must update next_in and avail_in when avail_in has
+ dropped to zero. It must update next_out and avail_out when avail_out
+ has dropped to zero. The application must initialize zalloc, zfree and
+ opaque before calling the init function. All other fields are set by the
+ compression library and must not be updated by the application.
+
+ The opaque value provided by the application will be passed as the first
+ parameter for calls of zalloc and zfree. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
+ opaque value.
+
+ zalloc must return Z_NULL if there is not enough memory for the object.
+ On 16-bit systems, the functions zalloc and zfree must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this
+ if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+ pointers returned by zalloc for objects of exactly 65536 bytes *must*
+ have their offset normalized to zero. The default allocation function
+ provided by this library ensures this (see zutil.c). To reduce memory
+ requirements and avoid any allocation of 64K objects, at the expense of
+ compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+
+ The fields total_in and total_out can be used for statistics or
+ progress reports. After compression, total_in holds the total size of
+ the uncompressed data and may be saved for use in the decompressor
+ (particularly if the decompressor wants to decompress everything in
+ a single step).
+*/
+
+ /* constants */
+
+#define Z_NO_FLUSH 0
+#define Z_PARTIAL_FLUSH 1
+#define Z_FULL_FLUSH 2
+#define Z_SYNC_FLUSH 3 /* experimental: partial_flush + byte align */
+#define Z_FINISH 4
+#define Z_PACKET_FLUSH 5
+/* See deflate() below for the usage of these constants */
+
+#define Z_OK 0
+#define Z_STREAM_END 1
+#define Z_ERRNO (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR (-3)
+#define Z_MEM_ERROR (-4)
+#define Z_BUF_ERROR (-5)
+/* error codes for the compression/decompression functions */
+
+#define Z_BEST_SPEED 1
+#define Z_BEST_COMPRESSION 9
+#define Z_DEFAULT_COMPRESSION (-1)
+/* compression levels */
+
+#define Z_FILTERED 1
+#define Z_HUFFMAN_ONLY 2
+#define Z_DEFAULT_STRATEGY 0
+
+#define Z_BINARY 0
+#define Z_ASCII 1
+#define Z_UNKNOWN 2
+/* Used to set the data_type field */
+
+#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
+
+extern char *zlib_version;
+/* The application can compare zlib_version and ZLIB_VERSION for consistency.
+ If the first character differs, the library code actually used is
+ not compatible with the zlib.h header file used by the application.
+ */
+
+ /* basic functions */
+
+extern int inflateInit OF((z_stream *strm));
+/*
+ Initializes the internal stream state for decompression. The fields
+ zalloc and zfree must be initialized before by the caller. If zalloc and
+ zfree are set to Z_NULL, inflateInit updates them to use default allocation
+ functions.
+
+ inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory. msg is set to null if there is no error message.
+ inflateInit does not perform any decompression: this will be done by
+ inflate().
+*/
+
+
+extern int inflate OF((z_stream *strm, int flush));
+/*
+ Performs one or both of the following actions:
+
+ - Decompress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in is updated and processing
+ will resume at this point for the next call of inflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. inflate() always provides as much output as possible
+ (until there is no more input data or no more space in the output buffer).
+
+ Before the call of inflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating the next_* and avail_* values accordingly.
+ The application can consume the uncompressed output when it wants, for
+ example when the output buffer is full (avail_out == 0), or after each
+ call of inflate().
+
+ If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
+ inflate flushes as much output as possible to the output buffer. The
+ flushing behavior of inflate is not specified for values of the flush
+ parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
+ current implementation actually flushes as much output as possible
+ anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data
+ has been consumed, it is expecting to see the length field of a stored
+ block; if not, it returns Z_DATA_ERROR.
+
+ inflate() should normally be called until it returns Z_STREAM_END or an
+ error. However if all decompression is to be performed in a single step
+ (a single call of inflate), the parameter flush should be set to
+ Z_FINISH. In this case all pending input is processed and all pending
+ output is flushed; avail_out must be large enough to hold all the
+ uncompressed data. (The size of the uncompressed data may have been saved
+ by the compressor for this purpose.) The next operation on this stream must
+ be inflateEnd to deallocate the decompression state. The use of Z_FINISH
+ is never required, but can be used to inform inflate that a faster routine
+ may be used for the single inflate() call.
+
+ inflate() returns Z_OK if some progress has been made (more input
+ processed or more output produced), Z_STREAM_END if the end of the
+ compressed data has been reached and all uncompressed output has been
+ produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
+ the stream structure was inconsistent (for example if next_in or next_out
+ was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
+ progress is possible or if there was not enough room in the output buffer
+ when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
+ call inflateSync to look for a good compression block. */
+
+
+extern int inflateEnd OF((z_stream *strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+
+ inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+ was inconsistent. In the error case, msg may be set but then points to a
+ static string (which must not be deallocated).
+*/
+
+ /* advanced functions */
+
+extern int inflateInit2 OF((z_stream *strm,
+ int windowBits));
+/*
+ This is another version of inflateInit with more compression options. The
+ fields next_out, zalloc and zfree must be initialized before by the caller.
+
+ The windowBits parameter is the base two logarithm of the maximum window
+ size (the size of the history buffer). It should be in the range 8..15 for
+ this version of the library (the value 16 will be allowed soon). The
+ default value is 15 if inflateInit is used instead. If a compressed stream
+ with a larger window size is given as input, inflate() will return with
+ the error code Z_DATA_ERROR instead of trying to allocate a larger window.
+
+ If next_out is not null, the library will use this buffer for the history
+ buffer; the buffer must either be large enough to hold the entire output
+ data, or have at least 1<<windowBits bytes. If next_out is null, the
+ library will allocate its own buffer (and leave next_out null). next_in
+ need not be provided here but must be provided by the application for the
+ next call of inflate().
+
+ If the history buffer is provided by the application, next_out must
+ never be changed by the application since the decompressor maintains
+ history information inside this buffer from call to call; the application
+ can only reset next_out to the beginning of the history buffer when
+ avail_out is zero and all output has been consumed.
+
+ inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
+ not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
+ windowBits < 8). msg is set to null if there is no error message.
+ inflateInit2 does not perform any decompression: this will be done by
+ inflate().
+*/
+
+extern int inflateSync OF((z_stream *strm));
+/*
+ Skips invalid compressed data until the special marker (see deflate()
+ above) can be found, or until all available input is skipped. No output
+ is provided.
+
+ inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
+ if no more input was provided, Z_DATA_ERROR if no marker has been found,
+ or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+ case, the application may save the current current value of total_in which
+ indicates where valid compressed data was found. In the error case, the
+ application may repeatedly call inflateSync, providing more input each time,
+ until success or end of the input data.
+*/
+
+extern int inflateReset OF((z_stream *strm));
+/*
+ This function is equivalent to inflateEnd followed by inflateInit,
+ but does not free and reallocate all the internal decompression state.
+ The stream will keep attributes that may have been set by inflateInit2.
+
+ inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+extern int inflateIncomp OF((z_stream *strm));
+/*
+ This function adds the data at next_in (avail_in bytes) to the output
+ history without performing any output. There must be no pending output,
+ and the decompressor must be expecting to see the start of a block.
+ Calling this function is equivalent to decompressing a stored block
+ containing the data at next_in (except that the data is not output).
+*/
+
+ /* checksum functions */
+
+/*
+ This function is not related to compression but is exported
+ anyway because it might be useful in applications using the
+ compression library.
+*/
+
+extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
+
+/*
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+ return the updated checksum. If buf is NULL, this function returns
+ the required initial value for the checksum.
+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+ much faster. Usage example:
+
+ uLong adler = adler32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ adler = adler32(adler, buffer, length);
+ }
+ if (adler != original_adler) error();
+*/
+
+#ifndef _Z_UTIL_H
+ struct internal_state {int dummy;}; /* hack for buggy compilers */
+#endif
+
+#endif /* _ZLIB_H */
diff --git a/lib_generic/ldiv.c b/lib_generic/ldiv.c
new file mode 100644
index 0000000..437b160
--- /dev/null
+++ b/lib_generic/ldiv.c
@@ -0,0 +1,55 @@
+/* Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Library General Public License as
+ published by the Free Software Foundation; either version 2 of the
+ License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with the GNU C Library; see the file COPYING.LIB. If not,
+ write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+
+typedef struct {
+ long quot;
+ long rem;
+} ldiv_t;
+/* Return the `ldiv_t' representation of NUMER over DENOM. */
+ldiv_t
+ldiv (long int numer, long int denom)
+{
+ ldiv_t result;
+
+ result.quot = numer / denom;
+ result.rem = numer % denom;
+
+ /* The ANSI standard says that |QUOT| <= |NUMER / DENOM|, where
+ NUMER / DENOM is to be computed in infinite precision. In
+ other words, we should always truncate the quotient towards
+ zero, never -infinity. Machine division and remainer may
+ work either way when one or both of NUMER or DENOM is
+ negative. If only one is negative and QUOT has been
+ truncated towards -infinity, REM will have the same sign as
+ DENOM and the opposite sign of NUMER; if both are negative
+ and QUOT has been truncated towards -infinity, REM will be
+ positive (will have the opposite sign of NUMER). These are
+ considered `wrong'. If both are NUM and DENOM are positive,
+ RESULT will always be positive. This all boils down to: if
+ NUMER >= 0, but REM < 0, we got the wrong answer. In that
+ case, to get the right answer, add 1 to QUOT and subtract
+ DENOM from REM. */
+
+ if (numer >= 0 && result.rem < 0)
+ {
+ ++result.quot;
+ result.rem -= denom;
+ }
+
+ return result;
+}
diff --git a/lib_generic/zlib.c b/lib_generic/zlib.c
new file mode 100644
index 0000000..3b7ab25
--- /dev/null
+++ b/lib_generic/zlib.c
@@ -0,0 +1,2161 @@
+/*
+ * This file is derived from various .h and .c files from the zlib-0.95
+ * distribution by Jean-loup Gailly and Mark Adler, with some additions
+ * by Paul Mackerras to aid in implementing Deflate compression and
+ * decompression for PPP packets. See zlib.h for conditions of
+ * distribution and use.
+ *
+ * Changes that have been made include:
+ * - changed functions not used outside this file to "local"
+ * - added minCompression parameter to deflateInit2
+ * - added Z_PACKET_FLUSH (see zlib.h for details)
+ * - added inflateIncomp
+ */
+
+/*+++++*/
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* From: zutil.h,v 1.9 1995/05/03 17:27:12 jloup Exp */
+
+#define _Z_UTIL_H
+
+#include "zlib.h"
+
+#ifndef local
+# define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+#define FAR
+
+typedef unsigned char uch;
+typedef uch FAR uchf;
+typedef unsigned short ush;
+typedef ush FAR ushf;
+typedef unsigned long ulg;
+
+extern char *z_errmsg[]; /* indexed by 1-zlib_error */
+
+#define ERR_RETURN(strm,err) return (strm->msg=z_errmsg[1-err], err)
+/* To be used only when the state is known to be valid */
+
+#ifndef NULL
+#define NULL ((void *) 0)
+#endif
+
+ /* common constants */
+
+#define DEFLATED 8
+
+#ifndef DEF_WBITS
+# define DEF_WBITS MAX_WBITS
+#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+
+#if MAX_MEM_LEVEL >= 8
+# define DEF_MEM_LEVEL 8
+#else
+# define DEF_MEM_LEVEL MAX_MEM_LEVEL
+#endif
+/* default memLevel */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES 2
+/* The three kinds of block type */
+
+#define MIN_MATCH 3
+#define MAX_MATCH 258
+/* The minimum and maximum match lengths */
+
+ /* functions */
+
+#include <linux/string.h>
+#define zmemcpy memcpy
+#define zmemzero(dest, len) memset(dest, 0, len)
+
+/* Diagnostic functions */
+#ifdef DEBUG_ZLIB
+# include <stdio.h>
+# ifndef verbose
+# define verbose 0
+# endif
+# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
+# define Trace(x) fprintf x
+# define Tracev(x) {if (verbose) fprintf x ;}
+# define Tracevv(x) {if (verbose>1) fprintf x ;}
+# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+# define Assert(cond,msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c,x)
+# define Tracecv(c,x)
+#endif
+
+
+typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len));
+
+/* voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); */
+/* void zcfree OF((voidpf opaque, voidpf ptr)); */
+
+#define ZALLOC(strm, items, size) \
+ (*((strm)->zalloc))((strm)->opaque, (items), (size))
+#define ZFREE(strm, addr, size) \
+ (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), (size))
+#define TRY_FREE(s, p, n) {if (p) ZFREE(s, p, n);}
+
+/* deflate.h -- internal compression state
+ * Copyright (C) 1995 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/*+++++*/
+/* infblock.h -- header to use infblock.c
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+struct inflate_blocks_state;
+typedef struct inflate_blocks_state FAR inflate_blocks_statef;
+
+local inflate_blocks_statef * inflate_blocks_new OF((
+ z_stream *z,
+ check_func c, /* check function */
+ uInt w)); /* window size */
+
+local int inflate_blocks OF((
+ inflate_blocks_statef *,
+ z_stream *,
+ int)); /* initial return code */
+
+local void inflate_blocks_reset OF((
+ inflate_blocks_statef *,
+ z_stream *,
+ uLongf *)); /* check value on output */
+
+local int inflate_blocks_free OF((
+ inflate_blocks_statef *,
+ z_stream *,
+ uLongf *)); /* check value on output */
+
+local int inflate_addhistory OF((
+ inflate_blocks_statef *,
+ z_stream *));
+
+local int inflate_packet_flush OF((
+ inflate_blocks_statef *));
+
+/*+++++*/
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* Huffman code lookup table entry--this entry is four bytes for machines
+ that have 16-bit pointers (e.g. PC's in the small or medium model). */
+
+typedef struct inflate_huft_s FAR inflate_huft;
+
+struct inflate_huft_s {
+ union {
+ struct {
+ Byte Exop; /* number of extra bits or operation */
+ Byte Bits; /* number of bits in this code or subcode */
+ } what;
+ uInt Nalloc; /* number of these allocated here */
+ Bytef *pad; /* pad structure to a power of 2 (4 bytes for */
+ } word; /* 16-bit, 8 bytes for 32-bit machines) */
+ union {
+ uInt Base; /* literal, length base, or distance base */
+ inflate_huft *Next; /* pointer to next level of table */
+ } more;
+};
+
+#ifdef DEBUG_ZLIB
+ local uInt inflate_hufts;
+#endif
+
+local int inflate_trees_bits OF((
+ uIntf *, /* 19 code lengths */
+ uIntf *, /* bits tree desired/actual depth */
+ inflate_huft * FAR *, /* bits tree result */
+ z_stream *)); /* for zalloc, zfree functions */
+
+local int inflate_trees_dynamic OF((
+ uInt, /* number of literal/length codes */
+ uInt, /* number of distance codes */
+ uIntf *, /* that many (total) code lengths */
+ uIntf *, /* literal desired/actual bit depth */
+ uIntf *, /* distance desired/actual bit depth */
+ inflate_huft * FAR *, /* literal/length tree result */
+ inflate_huft * FAR *, /* distance tree result */
+ z_stream *)); /* for zalloc, zfree functions */
+
+local int inflate_trees_fixed OF((
+ uIntf *, /* literal desired/actual bit depth */
+ uIntf *, /* distance desired/actual bit depth */
+ inflate_huft * FAR *, /* literal/length tree result */
+ inflate_huft * FAR *)); /* distance tree result */
+
+local int inflate_trees_free OF((
+ inflate_huft *, /* tables to free */
+ z_stream *)); /* for zfree function */
+
+
+/*+++++*/
+/* infcodes.h -- header to use infcodes.c
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+struct inflate_codes_state;
+typedef struct inflate_codes_state FAR inflate_codes_statef;
+
+local inflate_codes_statef *inflate_codes_new OF((
+ uInt, uInt,
+ inflate_huft *, inflate_huft *,
+ z_stream *));
+
+local int inflate_codes OF((
+ inflate_blocks_statef *,
+ z_stream *,
+ int));
+
+local void inflate_codes_free OF((
+ inflate_codes_statef *,
+ z_stream *));
+
+
+/*+++++*/
+/* inflate.c -- zlib interface to inflate modules
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* inflate private state */
+struct internal_state {
+
+ /* mode */
+ enum {
+ METHOD, /* waiting for method byte */
+ FLAG, /* waiting for flag byte */
+ BLOCKS, /* decompressing blocks */
+ CHECK4, /* four check bytes to go */
+ CHECK3, /* three check bytes to go */
+ CHECK2, /* two check bytes to go */
+ CHECK1, /* one check byte to go */
+ DONE, /* finished check, done */
+ BAD} /* got an error--stay here */
+ mode; /* current inflate mode */
+
+ /* mode dependent information */
+ union {
+ uInt method; /* if FLAGS, method byte */
+ struct {
+ uLong was; /* computed check value */
+ uLong need; /* stream check value */
+ } check; /* if CHECK, check values to compare */
+ uInt marker; /* if BAD, inflateSync's marker bytes count */
+ } sub; /* submode */
+
+ /* mode independent information */
+ int nowrap; /* flag for no wrapper */
+ uInt wbits; /* log2(window size) (8..15, defaults to 15) */
+ inflate_blocks_statef
+ *blocks; /* current inflate_blocks state */
+
+};
+
+
+int inflateReset(z)
+z_stream *z;
+{
+ uLong c;
+
+ if (z == Z_NULL || z->state == Z_NULL)
+ return Z_STREAM_ERROR;
+ z->total_in = z->total_out = 0;
+ z->msg = Z_NULL;
+ z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
+ inflate_blocks_reset(z->state->blocks, z, &c);
+ Trace((stderr, "inflate: reset\n"));
+ return Z_OK;
+}
+
+
+int inflateEnd(z)
+z_stream *z;
+{
+ uLong c;
+
+ if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
+ return Z_STREAM_ERROR;
+ if (z->state->blocks != Z_NULL)
+ inflate_blocks_free(z->state->blocks, z, &c);
+ ZFREE(z, z->state, sizeof(struct internal_state));
+ z->state = Z_NULL;
+ Trace((stderr, "inflate: end\n"));
+ return Z_OK;
+}
+
+
+int inflateInit2(z, w)
+z_stream *z;
+int w;
+{
+ /* initialize state */
+ if (z == Z_NULL)
+ return Z_STREAM_ERROR;
+/* if (z->zalloc == Z_NULL) z->zalloc = zcalloc; */
+/* if (z->zfree == Z_NULL) z->zfree = zcfree; */
+ if ((z->state = (struct internal_state FAR *)
+ ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
+ return Z_MEM_ERROR;
+ z->state->blocks = Z_NULL;
+
+ /* handle undocumented nowrap option (no zlib header or check) */
+ z->state->nowrap = 0;
+ if (w < 0)
+ {
+ w = - w;
+ z->state->nowrap = 1;
+ }
+
+ /* set window size */
+ if (w < 8 || w > 15)
+ {
+ inflateEnd(z);
+ return Z_STREAM_ERROR;
+ }
+ z->state->wbits = (uInt)w;
+
+ /* create inflate_blocks state */
+ if ((z->state->blocks =
+ inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w))
+ == Z_NULL)
+ {
+ inflateEnd(z);
+ return Z_MEM_ERROR;
+ }
+ Trace((stderr, "inflate: allocated\n"));
+
+ /* reset state */
+ inflateReset(z);
+ return Z_OK;
+}
+
+
+int inflateInit(z)
+z_stream *z;
+{
+ return inflateInit2(z, DEF_WBITS);
+}
+
+
+#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;}
+#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
+
+int inflate(z, f)
+z_stream *z;
+int f;
+{
+ int r;
+ uInt b;
+
+ if (z == Z_NULL || z->next_in == Z_NULL)
+ return Z_STREAM_ERROR;
+ r = Z_BUF_ERROR;
+ while (1) switch (z->state->mode)
+ {
+ case METHOD:
+ NEEDBYTE
+ if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED)
+ {
+ z->state->mode = BAD;
+ z->msg = "unknown compression method";
+ z->state->sub.marker = 5; /* can't try inflateSync */
+ break;
+ }
+ if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
+ {
+ z->state->mode = BAD;
+ z->msg = "invalid window size";
+ z->state->sub.marker = 5; /* can't try inflateSync */
+ break;
+ }
+ z->state->mode = FLAG;
+ case FLAG:
+ NEEDBYTE
+ if ((b = NEXTBYTE) & 0x20)
+ {
+ z->state->mode = BAD;
+ z->msg = "invalid reserved bit";
+ z->state->sub.marker = 5; /* can't try inflateSync */
+ break;
+ }
+ if (((z->state->sub.method << 8) + b) % 31)
+ {
+ z->state->mode = BAD;
+ z->msg = "incorrect header check";
+ z->state->sub.marker = 5; /* can't try inflateSync */
+ break;
+ }
+ Trace((stderr, "inflate: zlib header ok\n"));
+ z->state->mode = BLOCKS;
+ case BLOCKS:
+ r = inflate_blocks(z->state->blocks, z, r);
+ if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0)
+ r = inflate_packet_flush(z->state->blocks);
+ if (r == Z_DATA_ERROR)
+ {
+ z->state->mode = BAD;
+ z->state->sub.marker = 0; /* can try inflateSync */
+ break;
+ }
+ if (r != Z_STREAM_END)
+ return r;
+ r = Z_OK;
+ inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
+ if (z->state->nowrap)
+ {
+ z->state->mode = DONE;
+ break;
+ }
+ z->state->mode = CHECK4;
+ case CHECK4:
+ NEEDBYTE
+ z->state->sub.check.need = (uLong)NEXTBYTE << 24;
+ z->state->mode = CHECK3;
+ case CHECK3:
+ NEEDBYTE
+ z->state->sub.check.need += (uLong)NEXTBYTE << 16;
+ z->state->mode = CHECK2;
+ case CHECK2:
+ NEEDBYTE
+ z->state->sub.check.need += (uLong)NEXTBYTE << 8;
+ z->state->mode = CHECK1;
+ case CHECK1:
+ NEEDBYTE
+ z->state->sub.check.need += (uLong)NEXTBYTE;
+
+ if (z->state->sub.check.was != z->state->sub.check.need)
+ {
+ z->state->mode = BAD;
+ z->msg = "incorrect data check";
+ z->state->sub.marker = 5; /* can't try inflateSync */
+ break;
+ }
+ Trace((stderr, "inflate: zlib check ok\n"));
+ z->state->mode = DONE;
+ case DONE:
+ return Z_STREAM_END;
+ case BAD:
+ return Z_DATA_ERROR;
+ default:
+ return Z_STREAM_ERROR;
+ }
+
+ empty:
+ if (f != Z_PACKET_FLUSH)
+ return r;
+ z->state->mode = BAD;
+ z->state->sub.marker = 0; /* can try inflateSync */
+ return Z_DATA_ERROR;
+}
+
+/*
+ * This subroutine adds the data at next_in/avail_in to the output history
+ * without performing any output. The output buffer must be "caught up";
+ * i.e. no pending output (hence s->read equals s->write), and the state must
+ * be BLOCKS (i.e. we should be willing to see the start of a series of
+ * BLOCKS). On exit, the output will also be caught up, and the checksum
+ * will have been updated if need be.
+ */
+
+int inflateIncomp(z)
+z_stream *z;
+{
+ if (z->state->mode != BLOCKS)
+ return Z_DATA_ERROR;
+ return inflate_addhistory(z->state->blocks, z);
+}
+
+
+int inflateSync(z)
+z_stream *z;
+{
+ uInt n; /* number of bytes to look at */
+ Bytef *p; /* pointer to bytes */
+ uInt m; /* number of marker bytes found in a row */
+ uLong r, w; /* temporaries to save total_in and total_out */
+
+ /* set up */
+ if (z == Z_NULL || z->state == Z_NULL)
+ return Z_STREAM_ERROR;
+ if (z->state->mode != BAD)
+ {
+ z->state->mode = BAD;
+ z->state->sub.marker = 0;
+ }
+ if ((n = z->avail_in) == 0)
+ return Z_BUF_ERROR;
+ p = z->next_in;
+ m = z->state->sub.marker;
+
+ /* search */
+ while (n && m < 4)
+ {
+ if (*p == (Byte)(m < 2 ? 0 : 0xff))
+ m++;
+ else if (*p)
+ m = 0;
+ else
+ m = 4 - m;
+ p++, n--;
+ }
+
+ /* restore */
+ z->total_in += p - z->next_in;
+ z->next_in = p;
+ z->avail_in = n;
+ z->state->sub.marker = m;
+
+ /* return no joy or set up to restart on a new block */
+ if (m != 4)
+ return Z_DATA_ERROR;
+ r = z->total_in; w = z->total_out;
+ inflateReset(z);
+ z->total_in = r; z->total_out = w;
+ z->state->mode = BLOCKS;
+ return Z_OK;
+}
+
+#undef NEEDBYTE
+#undef NEXTBYTE
+
+/*+++++*/
+/* infutil.h -- types and macros common to blocks and codes
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* inflate blocks semi-private state */
+struct inflate_blocks_state {
+
+ /* mode */
+ enum {
+ TYPE, /* get type bits (3, including end bit) */
+ LENS, /* get lengths for stored */
+ STORED, /* processing stored block */
+ TABLE, /* get table lengths */
+ BTREE, /* get bit lengths tree for a dynamic block */
+ DTREE, /* get length, distance trees for a dynamic block */
+ CODES, /* processing fixed or dynamic block */
+ DRY, /* output remaining window bytes */
+ DONEB, /* finished last block, done */
+ BADB} /* got a data error--stuck here */
+ mode; /* current inflate_block mode */
+
+ /* mode dependent information */
+ union {
+ uInt left; /* if STORED, bytes left to copy */
+ struct {
+ uInt table; /* table lengths (14 bits) */
+ uInt index; /* index into blens (or border) */
+ uIntf *blens; /* bit lengths of codes */
+ uInt bb; /* bit length tree depth */
+ inflate_huft *tb; /* bit length decoding tree */
+ int nblens; /* # elements allocated at blens */
+ } trees; /* if DTREE, decoding info for trees */
+ struct {
+ inflate_huft *tl, *td; /* trees to free */
+ inflate_codes_statef
+ *codes;
+ } decode; /* if CODES, current state */
+ } sub; /* submode */
+ uInt last; /* true if this block is the last block */
+
+ /* mode independent information */
+ uInt bitk; /* bits in bit buffer */
+ uLong bitb; /* bit buffer */
+ Bytef *window; /* sliding window */
+ Bytef *end; /* one byte after sliding window */
+ Bytef *read; /* window read pointer */
+ Bytef *write; /* window write pointer */
+ check_func checkfn; /* check function */
+ uLong check; /* check on output */
+
+};
+
+
+/* defines for inflate input/output */
+/* update pointers and return */
+#define UPDBITS {s->bitb=b;s->bitk=k;}
+#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
+#define UPDOUT {s->write=q;}
+#define UPDATE {UPDBITS UPDIN UPDOUT}
+#define LEAVE {UPDATE return inflate_flush(s,z,r);}
+/* get bytes and bits */
+#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
+#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
+#define NEXTBYTE (n--,*p++)
+#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
+#define DUMPBITS(j) {b>>=(j);k-=(j);}
+/* output bytes */
+#define WAVAIL (q<s->read?s->read-q-1:s->end-q)
+#define LOADOUT {q=s->write;m=WAVAIL;}
+#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}}
+#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
+#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
+#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
+/* load local pointers */
+#define LOAD {LOADIN LOADOUT}
+
+/*
+ * The IBM 150 firmware munges the data right after _etext[]. This
+ * protects it. -- Cort
+ */
+#if 0
+local uInt protect_mask[] = {0, 0, 0, 0, 0, 0, 0, 0, 0 ,0 ,0 ,0};
+#endif
+/* And'ing with mask[n] masks the lower n bits */
+local uInt inflate_mask[] = {
+ 0x0000,
+ 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
+ 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
+};
+
+/* copy as much as possible from the sliding window to the output area */
+local int inflate_flush OF((
+ inflate_blocks_statef *,
+ z_stream *,
+ int));
+
+/*+++++*/
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+local int inflate_fast OF((
+ uInt,
+ uInt,
+ inflate_huft *,
+ inflate_huft *,
+ inflate_blocks_statef *,
+ z_stream *));
+
+
+/*+++++*/
+/* infblock.c -- interpret and process block types to last block
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* Table for deflate from PKZIP's appnote.txt. */
+local uInt border[] = { /* Order of the bit length code lengths */
+ 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+/*
+ Notes beyond the 1.93a appnote.txt:
+
+ 1. Distance pointers never point before the beginning of the output
+ stream.
+ 2. Distance pointers can point back across blocks, up to 32k away.
+ 3. There is an implied maximum of 7 bits for the bit length table and
+ 15 bits for the actual data.
+ 4. If only one code exists, then it is encoded using one bit. (Zero
+ would be more efficient, but perhaps a little confusing.) If two
+ codes exist, they are coded using one bit each (0 and 1).
+ 5. There is no way of sending zero distance codes--a dummy must be
+ sent if there are none. (History: a pre 2.0 version of PKZIP would
+ store blocks with no distance codes, but this was discovered to be
+ too harsh a criterion.) Valid only for 1.93a. 2.04c does allow
+ zero distance codes, which is sent as one code of zero bits in
+ length.
+ 6. There are up to 286 literal/length codes. Code 256 represents the
+ end-of-block. Note however that the static length tree defines
+ 288 codes just to fill out the Huffman codes. Codes 286 and 287
+ cannot be used though, since there is no length base or extra bits
+ defined for them. Similarily, there are up to 30 distance codes.
+ However, static trees define 32 codes (all 5 bits) to fill out the
+ Huffman codes, but the last two had better not show up in the data.
+ 7. Unzip can check dynamic Huffman blocks for complete code sets.
+ The exception is that a single code would not be complete (see #4).
+ 8. The five bits following the block type is really the number of
+ literal codes sent minus 257.
+ 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
+ (1+6+6). Therefore, to output three times the length, you output
+ three codes (1+1+1), whereas to output four times the same length,
+ you only need two codes (1+3). Hmm.
+ 10. In the tree reconstruction algorithm, Code = Code + Increment
+ only if BitLength(i) is not zero. (Pretty obvious.)
+ 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19)
+ 12. Note: length code 284 can represent 227-258, but length code 285
+ really is 258. The last length deserves its own, short code
+ since it gets used a lot in very redundant files. The length
+ 258 is special since 258 - 3 (the min match length) is 255.
+ 13. The literal/length and distance code bit lengths are read as a
+ single stream of lengths. It is possible (and advantageous) for
+ a repeat code (16, 17, or 18) to go across the boundary between
+ the two sets of lengths.
+ */
+
+
+local void inflate_blocks_reset(s, z, c)
+inflate_blocks_statef *s;
+z_stream *z;
+uLongf *c;
+{
+ if (s->checkfn != Z_NULL)
+ *c = s->check;
+ if (s->mode == BTREE || s->mode == DTREE)
+ ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
+ if (s->mode == CODES)
+ {
+ inflate_codes_free(s->sub.decode.codes, z);
+ inflate_trees_free(s->sub.decode.td, z);
+ inflate_trees_free(s->sub.decode.tl, z);
+ }
+ s->mode = TYPE;
+ s->bitk = 0;
+ s->bitb = 0;
+ s->read = s->write = s->window;
+ if (s->checkfn != Z_NULL)
+ s->check = (*s->checkfn)(0L, Z_NULL, 0);
+ if (z->outcb != Z_NULL)
+ (*z->outcb)(Z_NULL, 0);
+ Trace((stderr, "inflate: blocks reset\n"));
+}
+
+
+local inflate_blocks_statef *inflate_blocks_new(z, c, w)
+z_stream *z;
+check_func c;
+uInt w;
+{
+ inflate_blocks_statef *s;
+
+ if ((s = (inflate_blocks_statef *)ZALLOC
+ (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
+ return s;
+ if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
+ {
+ ZFREE(z, s, sizeof(struct inflate_blocks_state));
+ return Z_NULL;
+ }
+ s->end = s->window + w;
+ s->checkfn = c;
+ s->mode = TYPE;
+ Trace((stderr, "inflate: blocks allocated\n"));
+ inflate_blocks_reset(s, z, &s->check);
+ return s;
+}
+
+
+local int inflate_blocks(s, z, r)
+inflate_blocks_statef *s;
+z_stream *z;
+int r;
+{
+ uInt t; /* temporary storage */
+ uLong b; /* bit buffer */
+ uInt k; /* bits in bit buffer */
+ Bytef *p; /* input data pointer */
+ uInt n; /* bytes available there */
+ Bytef *q; /* output window write pointer */
+ uInt m; /* bytes to end of window or read pointer */
+
+ /* copy input/output information to locals (UPDATE macro restores) */
+ LOAD
+
+ /* process input based on current state */
+ while (1) switch (s->mode)
+ {
+ case TYPE:
+ NEEDBITS(3)
+ t = (uInt)b & 7;
+ s->last = t & 1;
+ switch (t >> 1)
+ {
+ case 0: /* stored */
+ Trace((stderr, "inflate: stored block%s\n",
+ s->last ? " (last)" : ""));
+ DUMPBITS(3)
+ t = k & 7; /* go to byte boundary */
+ DUMPBITS(t)
+ s->mode = LENS; /* get length of stored block */
+ break;
+ case 1: /* fixed */
+ Trace((stderr, "inflate: fixed codes block%s\n",
+ s->last ? " (last)" : ""));
+ {
+ uInt bl, bd;
+ inflate_huft *tl, *td;
+
+ inflate_trees_fixed(&bl, &bd, &tl, &td);
+ s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
+ if (s->sub.decode.codes == Z_NULL)
+ {
+ r = Z_MEM_ERROR;
+ LEAVE
+ }
+ s->sub.decode.tl = Z_NULL; /* don't try to free these */
+ s->sub.decode.td = Z_NULL;
+ }
+ DUMPBITS(3)
+ s->mode = CODES;
+ break;
+ case 2: /* dynamic */
+ Trace((stderr, "inflate: dynamic codes block%s\n",
+ s->last ? " (last)" : ""));
+ DUMPBITS(3)
+ s->mode = TABLE;
+ break;
+ case 3: /* illegal */
+ DUMPBITS(3)
+ s->mode = BADB;
+ z->msg = "invalid block type";
+ r = Z_DATA_ERROR;
+ LEAVE
+ }
+ break;
+ case LENS:
+ NEEDBITS(32)
+ if (((~b) >> 16) != (b & 0xffff))
+ {
+ s->mode = BADB;
+ z->msg = "invalid stored block lengths";
+ r = Z_DATA_ERROR;
+ LEAVE
+ }
+ s->sub.left = (uInt)b & 0xffff;
+ b = k = 0; /* dump bits */
+ Tracev((stderr, "inflate: stored length %u\n", s->sub.left));
+ s->mode = s->sub.left ? STORED : TYPE;
+ break;
+ case STORED:
+ if (n == 0)
+ LEAVE
+ NEEDOUT
+ t = s->sub.left;
+ if (t > n) t = n;
+ if (t > m) t = m;
+ zmemcpy(q, p, t);
+ p += t; n -= t;
+ q += t; m -= t;
+ if ((s->sub.left -= t) != 0)
+ break;
+ Tracev((stderr, "inflate: stored end, %lu total out\n",
+ z->total_out + (q >= s->read ? q - s->read :
+ (s->end - s->read) + (q - s->window))));
+ s->mode = s->last ? DRY : TYPE;
+ break;
+ case TABLE:
+ NEEDBITS(14)
+ s->sub.trees.table = t = (uInt)b & 0x3fff;
+#ifndef PKZIP_BUG_WORKAROUND
+ if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
+ {
+ s->mode = BADB;
+ z->msg = "too many length or distance symbols";
+ r = Z_DATA_ERROR;
+ LEAVE
+ }
+#endif
+ t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
+ if (t < 19)
+ t = 19;
+ if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
+ {
+ r = Z_MEM_ERROR;
+ LEAVE
+ }
+ s->sub.trees.nblens = t;
+ DUMPBITS(14)
+ s->sub.trees.index = 0;
+ Tracev((stderr, "inflate: table sizes ok\n"));
+ s->mode = BTREE;
+ case BTREE:
+ while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
+ {
+ NEEDBITS(3)
+ s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
+ DUMPBITS(3)
+ }
+ while (s->sub.trees.index < 19)
+ s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
+ s->sub.trees.bb = 7;
+ t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
+ &s->sub.trees.tb, z);
+ if (t != Z_OK)
+ {
+ r = t;
+ if (r == Z_DATA_ERROR)
+ s->mode = BADB;
+ LEAVE
+ }
+ s->sub.trees.index = 0;
+ Tracev((stderr, "inflate: bits tree ok\n"));
+ s->mode = DTREE;
+ case DTREE:
+ while (t = s->sub.trees.table,
+ s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
+ {
+ inflate_huft *h;
+ uInt i, j, c;
+
+ t = s->sub.trees.bb;
+ NEEDBITS(t)
+ h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
+ t = h->word.what.Bits;
+ c = h->more.Base;
+ if (c < 16)
+ {
+ DUMPBITS(t)
+ s->sub.trees.blens[s->sub.trees.index++] = c;
+ }
+ else /* c == 16..18 */
+ {
+ i = c == 18 ? 7 : c - 14;
+ j = c == 18 ? 11 : 3;
+ NEEDBITS(t + i)
+ DUMPBITS(t)
+ j += (uInt)b & inflate_mask[i];
+ DUMPBITS(i)
+ i = s->sub.trees.index;
+ t = s->sub.trees.table;
+ if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
+ (c == 16 && i < 1))
+ {
+ s->mode = BADB;
+ z->msg = "invalid bit length repeat";
+ r = Z_DATA_ERROR;
+ LEAVE
+ }
+ c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
+ do {
+ s->sub.trees.blens[i++] = c;
+ } while (--j);
+ s->sub.trees.index = i;
+ }
+ }
+ inflate_trees_free(s->sub.trees.tb, z);
+ s->sub.trees.tb = Z_NULL;
+ {
+ uInt bl, bd;
+ inflate_huft *tl, *td;
+ inflate_codes_statef *c;
+
+ bl = 9; /* must be <= 9 for lookahead assumptions */
+ bd = 6; /* must be <= 9 for lookahead assumptions */
+ t = s->sub.trees.table;
+ t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
+ s->sub.trees.blens, &bl, &bd, &tl, &td, z);
+ if (t != Z_OK)
+ {
+ if (t == (uInt)Z_DATA_ERROR)
+ s->mode = BADB;
+ r = t;
+ LEAVE
+ }
+ Tracev((stderr, "inflate: trees ok\n"));
+ if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
+ {
+ inflate_trees_free(td, z);
+ inflate_trees_free(tl, z);
+ r = Z_MEM_ERROR;
+ LEAVE
+ }
+ ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
+ s->sub.decode.codes = c;
+ s->sub.decode.tl = tl;
+ s->sub.decode.td = td;
+ }
+ s->mode = CODES;
+ case CODES:
+ UPDATE
+ if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
+ return inflate_flush(s, z, r);
+ r = Z_OK;
+ inflate_codes_free(s->sub.decode.codes, z);
+ inflate_trees_free(s->sub.decode.td, z);
+ inflate_trees_free(s->sub.decode.tl, z);
+ LOAD
+ Tracev((stderr, "inflate: codes end, %lu total out\n",
+ z->total_out + (q >= s->read ? q - s->read :
+ (s->end - s->read) + (q - s->window))));
+ if (!s->last)
+ {
+ s->mode = TYPE;
+ break;
+ }
+ if (k > 7) /* return unused byte, if any */
+ {
+ Assert(k < 16, "inflate_codes grabbed too many bytes")
+ k -= 8;
+ n++;
+ p--; /* can always return one */
+ }
+ s->mode = DRY;
+ case DRY:
+ FLUSH
+ if (s->read != s->write)
+ LEAVE
+ s->mode = DONEB;
+ case DONEB:
+ r = Z_STREAM_END;
+ LEAVE
+ case BADB:
+ r = Z_DATA_ERROR;
+ LEAVE
+ default:
+ r = Z_STREAM_ERROR;
+ LEAVE
+ }
+}
+
+
+local int inflate_blocks_free(s, z, c)
+inflate_blocks_statef *s;
+z_stream *z;
+uLongf *c;
+{
+ inflate_blocks_reset(s, z, c);
+ ZFREE(z, s->window, s->end - s->window);
+ ZFREE(z, s, sizeof(struct inflate_blocks_state));
+ Trace((stderr, "inflate: blocks freed\n"));
+ return Z_OK;
+}
+
+/*
+ * This subroutine adds the data at next_in/avail_in to the output history
+ * without performing any output. The output buffer must be "caught up";
+ * i.e. no pending output (hence s->read equals s->write), and the state must
+ * be BLOCKS (i.e. we should be willing to see the start of a series of
+ * BLOCKS). On exit, the output will also be caught up, and the checksum
+ * will have been updated if need be.
+ */
+local int inflate_addhistory(s, z)
+inflate_blocks_statef *s;
+z_stream *z;
+{
+ uLong b; /* bit buffer */ /* NOT USED HERE */
+ uInt k; /* bits in bit buffer */ /* NOT USED HERE */
+ uInt t; /* temporary storage */
+ Bytef *p; /* input data pointer */
+ uInt n; /* bytes available there */
+ Bytef *q; /* output window write pointer */
+ uInt m; /* bytes to end of window or read pointer */
+
+ if (s->read != s->write)
+ return Z_STREAM_ERROR;
+ if (s->mode != TYPE)
+ return Z_DATA_ERROR;
+
+ /* we're ready to rock */
+ LOAD
+ /* while there is input ready, copy to output buffer, moving
+ * pointers as needed.
+ */
+ while (n) {
+ t = n; /* how many to do */
+ /* is there room until end of buffer? */
+ if (t > m) t = m;
+ /* update check information */
+ if (s->checkfn != Z_NULL)
+ s->check = (*s->checkfn)(s->check, q, t);
+ /* output callback */
+ if (z->outcb != Z_NULL)
+ (*z->outcb)(q, t);
+ zmemcpy(q, p, t);
+ q += t;
+ p += t;
+ n -= t;
+ z->total_out += t;
+ s->read = q; /* drag read pointer forward */
+/* WRAP */ /* expand WRAP macro by hand to handle s->read */
+ if (q == s->end) {
+ s->read = q = s->window;
+ m = WAVAIL;
+ }
+ }
+ UPDATE
+ return Z_OK;
+}
+
+
+/*
+ * At the end of a Deflate-compressed PPP packet, we expect to have seen
+ * a `stored' block type value but not the (zero) length bytes.
+ */
+local int inflate_packet_flush(s)
+ inflate_blocks_statef *s;
+{
+ if (s->mode != LENS)
+ return Z_DATA_ERROR;
+ s->mode = TYPE;
+ return Z_OK;
+}
+
+
+/*+++++*/
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* simplify the use of the inflate_huft type with some defines */
+#define base more.Base
+#define next more.Next
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+
+local int huft_build OF((
+ uIntf *, /* code lengths in bits */
+ uInt, /* number of codes */
+ uInt, /* number of "simple" codes */
+ uIntf *, /* list of base values for non-simple codes */
+ uIntf *, /* list of extra bits for non-simple codes */
+ inflate_huft * FAR*,/* result: starting table */
+ uIntf *, /* maximum lookup bits (returns actual) */
+ z_stream *)); /* for zalloc function */
+
+local voidpf falloc OF((
+ voidpf, /* opaque pointer (not used) */
+ uInt, /* number of items */
+ uInt)); /* size of item */
+
+local void ffree OF((
+ voidpf q, /* opaque pointer (not used) */
+ voidpf p, /* what to free (not used) */
+ uInt n)); /* number of bytes (not used) */
+
+/* Tables for deflate from PKZIP's appnote.txt. */
+local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+ 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+ /* actually lengths - 2; also see note #13 above about 258 */
+local uInt cplext[] = { /* Extra bits for literal codes 257..285 */
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
+ 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */
+local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */
+ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+ 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+ 8193, 12289, 16385, 24577};
+local uInt cpdext[] = { /* Extra bits for distance codes */
+ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
+ 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
+ 12, 12, 13, 13};
+
+/*
+ Huffman code decoding is performed using a multi-level table lookup.
+ The fastest way to decode is to simply build a lookup table whose
+ size is determined by the longest code. However, the time it takes
+ to build this table can also be a factor if the data being decoded
+ is not very long. The most common codes are necessarily the
+ shortest codes, so those codes dominate the decoding time, and hence
+ the speed. The idea is you can have a shorter table that decodes the
+ shorter, more probable codes, and then point to subsidiary tables for
+ the longer codes. The time it costs to decode the longer codes is
+ then traded against the time it takes to make longer tables.
+
+ This results of this trade are in the variables lbits and dbits
+ below. lbits is the number of bits the first level table for literal/
+ length codes can decode in one step, and dbits is the same thing for
+ the distance codes. Subsequent tables are also less than or equal to
+ those sizes. These values may be adjusted either when all of the
+ codes are shorter than that, in which case the longest code length in
+ bits is used, or when the shortest code is *longer* than the requested
+ table size, in which case the length of the shortest code in bits is
+ used.
+
+ There are two different values for the two tables, since they code a
+ different number of possibilities each. The literal/length table
+ codes 286 possible values, or in a flat code, a little over eight
+ bits. The distance table codes 30 possible values, or a little less
+ than five bits, flat. The optimum values for speed end up being
+ about one bit more than those, so lbits is 8+1 and dbits is 5+1.
+ The optimum values may differ though from machine to machine, and
+ possibly even between compilers. Your mileage may vary.
+ */
+
+
+/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
+#define BMAX 15 /* maximum bit length of any code */
+#define N_MAX 288 /* maximum number of codes in any set */
+
+#ifdef DEBUG_ZLIB
+ uInt inflate_hufts;
+#endif
+
+local int huft_build(b, n, s, d, e, t, m, zs)
+uIntf *b; /* code lengths in bits (all assumed <= BMAX) */
+uInt n; /* number of codes (assumed <= N_MAX) */
+uInt s; /* number of simple-valued codes (0..s-1) */
+uIntf *d; /* list of base values for non-simple codes */
+uIntf *e; /* list of extra bits for non-simple codes */
+inflate_huft * FAR *t; /* result: starting table */
+uIntf *m; /* maximum lookup bits, returns actual */
+z_stream *zs; /* for zalloc function */
+/* Given a list of code lengths and a maximum table size, make a set of
+ tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR
+ if the given code set is incomplete (the tables are still built in this
+ case), Z_DATA_ERROR if the input is invalid (all zero length codes or an
+ over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */
+{
+
+ uInt a; /* counter for codes of length k */
+ uInt c[BMAX+1]; /* bit length count table */
+ uInt f; /* i repeats in table every f entries */
+ int g; /* maximum code length */
+ int h; /* table level */
+ register uInt i; /* counter, current code */
+ register uInt j; /* counter */
+ register int k; /* number of bits in current code */
+ int l; /* bits per table (returned in m) */
+ register uIntf *p; /* pointer into c[], b[], or v[] */
+ inflate_huft *q; /* points to current table */
+ struct inflate_huft_s r; /* table entry for structure assignment */
+ inflate_huft *u[BMAX]; /* table stack */
+ uInt v[N_MAX]; /* values in order of bit length */
+ register int w; /* bits before this table == (l * h) */
+ uInt x[BMAX+1]; /* bit offsets, then code stack */
+ uIntf *xp; /* pointer into x */
+ int y; /* number of dummy codes added */
+ uInt z; /* number of entries in current table */
+
+
+ /* Generate counts for each bit length */
+ p = c;
+#define C0 *p++ = 0;
+#define C2 C0 C0 C0 C0
+#define C4 C2 C2 C2 C2
+ C4 /* clear c[]--assume BMAX+1 is 16 */
+ p = b; i = n;
+ do {
+ c[*p++]++; /* assume all entries <= BMAX */
+ } while (--i);
+ if (c[0] == n) /* null input--all zero length codes */
+ {
+ *t = (inflate_huft *)Z_NULL;
+ *m = 0;
+ return Z_OK;
+ }
+
+
+ /* Find minimum and maximum length, bound *m by those */
+ l = *m;
+ for (j = 1; j <= BMAX; j++)
+ if (c[j])
+ break;
+ k = j; /* minimum code length */
+ if ((uInt)l < j)
+ l = j;
+ for (i = BMAX; i; i--)
+ if (c[i])
+ break;
+ g = i; /* maximum code length */
+ if ((uInt)l > i)
+ l = i;
+ *m = l;
+
+
+ /* Adjust last length count to fill out codes, if needed */
+ for (y = 1 << j; j < i; j++, y <<= 1)
+ if ((y -= c[j]) < 0)
+ return Z_DATA_ERROR;
+ if ((y -= c[i]) < 0)
+ return Z_DATA_ERROR;
+ c[i] += y;
+
+
+ /* Generate starting offsets into the value table for each length */
+ x[1] = j = 0;
+ p = c + 1; xp = x + 2;
+ while (--i) { /* note that i == g from above */
+ *xp++ = (j += *p++);
+ }
+
+
+ /* Make a table of values in order of bit lengths */
+ p = b; i = 0;
+ do {
+ if ((j = *p++) != 0)
+ v[x[j]++] = i;
+ } while (++i < n);
+
+
+ /* Generate the Huffman codes and for each, make the table entries */
+ x[0] = i = 0; /* first Huffman code is zero */
+ p = v; /* grab values in bit order */
+ h = -1; /* no tables yet--level -1 */
+ w = -l; /* bits decoded == (l * h) */
+ u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */
+ q = (inflate_huft *)Z_NULL; /* ditto */
+ z = 0; /* ditto */
+
+ /* go through the bit lengths (k already is bits in shortest code) */
+ for (; k <= g; k++)
+ {
+ a = c[k];
+ while (a--)
+ {
+ /* here i is the Huffman code of length k bits for value *p */
+ /* make tables up to required level */
+ while (k > w + l)
+ {
+ h++;
+ w += l; /* previous table always l bits */
+
+ /* compute minimum size table less than or equal to l bits */
+ z = (z = g - w) > (uInt)l ? l : z; /* table size upper limit */
+ if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */
+ { /* too few codes for k-w bit table */
+ f -= a + 1; /* deduct codes from patterns left */
+ xp = c + k;
+ if (j < z)
+ while (++j < z) /* try smaller tables up to z bits */
+ {
+ if ((f <<= 1) <= *++xp)
+ break; /* enough codes to use up j bits */
+ f -= *xp; /* else deduct codes from patterns */
+ }
+ }
+ z = 1 << j; /* table entries for j-bit table */
+
+ /* allocate and link in new table */
+ if ((q = (inflate_huft *)ZALLOC
+ (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
+ {
+ if (h)
+ inflate_trees_free(u[0], zs);
+ return Z_MEM_ERROR; /* not enough memory */
+ }
+ q->word.Nalloc = z + 1;
+#ifdef DEBUG_ZLIB
+ inflate_hufts += z + 1;
+#endif
+ *t = q + 1; /* link to list for huft_free() */
+ *(t = &(q->next)) = Z_NULL;
+ u[h] = ++q; /* table starts after link */
+
+ /* connect to last table, if there is one */
+ if (h)
+ {
+ x[h] = i; /* save pattern for backing up */
+ r.bits = (Byte)l; /* bits to dump before this table */
+ r.exop = (Byte)j; /* bits in this table */
+ r.next = q; /* pointer to this table */
+ j = i >> (w - l); /* (get around Turbo C bug) */
+ u[h-1][j] = r; /* connect to last table */
+ }
+ }
+
+ /* set up table entry in r */
+ r.bits = (Byte)(k - w);
+ if (p >= v + n)
+ r.exop = 128 + 64; /* out of values--invalid code */
+ else if (*p < s)
+ {
+ r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */
+ r.base = *p++; /* simple code is just the value */
+ }
+ else
+ {
+ r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */
+ r.base = d[*p++ - s];
+ }
+
+ /* fill code-like entries with r */
+ f = 1 << (k - w);
+ for (j = i >> w; j < z; j += f)
+ q[j] = r;
+
+ /* backwards increment the k-bit code i */
+ for (j = 1 << (k - 1); i & j; j >>= 1)
+ i ^= j;
+ i ^= j;
+
+ /* backup over finished tables */
+ while ((i & ((1 << w) - 1)) != x[h])
+ {
+ h--; /* don't need to update q */
+ w -= l;
+ }
+ }
+ }
+
+
+ /* Return Z_BUF_ERROR if we were given an incomplete table */
+ return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
+}
+
+
+local int inflate_trees_bits(c, bb, tb, z)
+uIntf *c; /* 19 code lengths */
+uIntf *bb; /* bits tree desired/actual depth */
+inflate_huft * FAR *tb; /* bits tree result */
+z_stream *z; /* for zfree function */
+{
+ int r;
+
+ r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
+ if (r == Z_DATA_ERROR)
+ z->msg = "oversubscribed dynamic bit lengths tree";
+ else if (r == Z_BUF_ERROR)
+ {
+ inflate_trees_free(*tb, z);
+ z->msg = "incomplete dynamic bit lengths tree";
+ r = Z_DATA_ERROR;
+ }
+ return r;
+}
+
+
+local int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
+uInt nl; /* number of literal/length codes */
+uInt nd; /* number of distance codes */
+uIntf *c; /* that many (total) code lengths */
+uIntf *bl; /* literal desired/actual bit depth */
+uIntf *bd; /* distance desired/actual bit depth */
+inflate_huft * FAR *tl; /* literal/length tree result */
+inflate_huft * FAR *td; /* distance tree result */
+z_stream *z; /* for zfree function */
+{
+ int r;
+
+ /* build literal/length tree */
+ if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK)
+ {
+ if (r == Z_DATA_ERROR)
+ z->msg = "oversubscribed literal/length tree";
+ else if (r == Z_BUF_ERROR)
+ {
+ inflate_trees_free(*tl, z);
+ z->msg = "incomplete literal/length tree";
+ r = Z_DATA_ERROR;
+ }
+ return r;
+ }
+
+ /* build distance tree */
+ if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK)
+ {
+ if (r == Z_DATA_ERROR)
+ z->msg = "oversubscribed literal/length tree";
+ else if (r == Z_BUF_ERROR) {
+#ifdef PKZIP_BUG_WORKAROUND
+ r = Z_OK;
+ }
+#else
+ inflate_trees_free(*td, z);
+ z->msg = "incomplete literal/length tree";
+ r = Z_DATA_ERROR;
+ }
+ inflate_trees_free(*tl, z);
+ return r;
+#endif
+ }
+
+ /* done */
+ return Z_OK;
+}
+
+
+/* build fixed tables only once--keep them here */
+local int fixed_lock = 0;
+local int fixed_built = 0;
+#define FIXEDH 530 /* number of hufts used by fixed tables */
+local uInt fixed_left = FIXEDH;
+local inflate_huft fixed_mem[FIXEDH];
+local uInt fixed_bl;
+local uInt fixed_bd;
+local inflate_huft *fixed_tl;
+local inflate_huft *fixed_td;
+
+
+local voidpf falloc(q, n, s)
+voidpf q; /* opaque pointer (not used) */
+uInt n; /* number of items */
+uInt s; /* size of item */
+{
+ Assert(s == sizeof(inflate_huft) && n <= fixed_left,
+ "inflate_trees falloc overflow");
+ if (q) s++; /* to make some compilers happy */
+ fixed_left -= n;
+ return (voidpf)(fixed_mem + fixed_left);
+}
+
+
+local void ffree(q, p, n)
+voidpf q;
+voidpf p;
+uInt n;
+{
+ Assert(0, "inflate_trees ffree called!");
+ if (q) q = p; /* to make some compilers happy */
+}
+
+
+local int inflate_trees_fixed(bl, bd, tl, td)
+uIntf *bl; /* literal desired/actual bit depth */
+uIntf *bd; /* distance desired/actual bit depth */
+inflate_huft * FAR *tl; /* literal/length tree result */
+inflate_huft * FAR *td; /* distance tree result */
+{
+ /* build fixed tables if not built already--lock out other instances */
+ while (++fixed_lock > 1)
+ fixed_lock--;
+ if (!fixed_built)
+ {
+ int k; /* temporary variable */
+ unsigned c[288]; /* length list for huft_build */
+ z_stream z; /* for falloc function */
+
+ /* set up fake z_stream for memory routines */
+ z.zalloc = falloc;
+ z.zfree = ffree;
+ z.opaque = Z_NULL;
+
+ /* literal table */
+ for (k = 0; k < 144; k++)
+ c[k] = 8;
+ for (; k < 256; k++)
+ c[k] = 9;
+ for (; k < 280; k++)
+ c[k] = 7;
+ for (; k < 288; k++)
+ c[k] = 8;
+ fixed_bl = 7;
+ huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
+
+ /* distance table */
+ for (k = 0; k < 30; k++)
+ c[k] = 5;
+ fixed_bd = 5;
+ huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
+
+ /* done */
+ fixed_built = 1;
+ }
+ fixed_lock--;
+ *bl = fixed_bl;
+ *bd = fixed_bd;
+ *tl = fixed_tl;
+ *td = fixed_td;
+ return Z_OK;
+}
+
+
+local int inflate_trees_free(t, z)
+inflate_huft *t; /* table to free */
+z_stream *z; /* for zfree function */
+/* Free the malloc'ed tables built by huft_build(), which makes a linked
+ list of the tables it made, with the links in a dummy first entry of
+ each table. */
+{
+ register inflate_huft *p, *q;
+
+ /* Go through linked list, freeing from the malloced (t[-1]) address. */
+ p = t;
+ while (p != Z_NULL)
+ {
+ q = (--p)->next;
+ ZFREE(z, p, p->word.Nalloc * sizeof(inflate_huft));
+ p = q;
+ }
+ return Z_OK;
+}
+
+/*+++++*/
+/* infcodes.c -- process literals and length/distance pairs
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* simplify the use of the inflate_huft type with some defines */
+#define base more.Base
+#define next more.Next
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+/* inflate codes private state */
+struct inflate_codes_state {
+
+ /* mode */
+ enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
+ START, /* x: set up for LEN */
+ LEN, /* i: get length/literal/eob next */
+ LENEXT, /* i: getting length extra (have base) */
+ DIST, /* i: get distance next */
+ DISTEXT, /* i: getting distance extra */
+ COPY, /* o: copying bytes in window, waiting for space */
+ LIT, /* o: got literal, waiting for output space */
+ WASH, /* o: got eob, possibly still output waiting */
+ END, /* x: got eob and all data flushed */
+ BADCODE} /* x: got error */
+ mode; /* current inflate_codes mode */
+
+ /* mode dependent information */
+ uInt len;
+ union {
+ struct {
+ inflate_huft *tree; /* pointer into tree */
+ uInt need; /* bits needed */
+ } code; /* if LEN or DIST, where in tree */
+ uInt lit; /* if LIT, literal */
+ struct {
+ uInt get; /* bits to get for extra */
+ uInt dist; /* distance back to copy from */
+ } copy; /* if EXT or COPY, where and how much */
+ } sub; /* submode */
+
+ /* mode independent information */
+ Byte lbits; /* ltree bits decoded per branch */
+ Byte dbits; /* dtree bits decoder per branch */
+ inflate_huft *ltree; /* literal/length/eob tree */
+ inflate_huft *dtree; /* distance tree */
+
+};
+
+
+local inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
+uInt bl, bd;
+inflate_huft *tl, *td;
+z_stream *z;
+{
+ inflate_codes_statef *c;
+
+ if ((c = (inflate_codes_statef *)
+ ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
+ {
+ c->mode = START;
+ c->lbits = (Byte)bl;
+ c->dbits = (Byte)bd;
+ c->ltree = tl;
+ c->dtree = td;
+ Tracev((stderr, "inflate: codes new\n"));
+ }
+ return c;
+}
+
+
+local int inflate_codes(s, z, r)
+inflate_blocks_statef *s;
+z_stream *z;
+int r;
+{
+ uInt j; /* temporary storage */
+ inflate_huft *t; /* temporary pointer */
+ uInt e; /* extra bits or operation */
+ uLong b; /* bit buffer */
+ uInt k; /* bits in bit buffer */
+ Bytef *p; /* input data pointer */
+ uInt n; /* bytes available there */
+ Bytef *q; /* output window write pointer */
+ uInt m; /* bytes to end of window or read pointer */
+ Bytef *f; /* pointer to copy strings from */
+ inflate_codes_statef *c = s->sub.decode.codes; /* codes state */
+
+ /* copy input/output information to locals (UPDATE macro restores) */
+ LOAD
+
+ /* process input and output based on current state */
+ while (1) switch (c->mode)
+ { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
+ case START: /* x: set up for LEN */
+#ifndef SLOW
+ if (m >= 258 && n >= 10)
+ {
+ UPDATE
+ r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
+ LOAD
+ if (r != Z_OK)
+ {
+ c->mode = r == Z_STREAM_END ? WASH : BADCODE;
+ break;
+ }
+ }
+#endif /* !SLOW */
+ c->sub.code.need = c->lbits;
+ c->sub.code.tree = c->ltree;
+ c->mode = LEN;
+ case LEN: /* i: get length/literal/eob next */
+ j = c->sub.code.need;
+ NEEDBITS(j)
+ t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
+ DUMPBITS(t->bits)
+ e = (uInt)(t->exop);
+ if (e == 0) /* literal */
+ {
+ c->sub.lit = t->base;
+ Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", t->base));
+ c->mode = LIT;
+ break;
+ }
+ if (e & 16) /* length */
+ {
+ c->sub.copy.get = e & 15;
+ c->len = t->base;
+ c->mode = LENEXT;
+ break;
+ }
+ if ((e & 64) == 0) /* next table */
+ {
+ c->sub.code.need = e;
+ c->sub.code.tree = t->next;
+ break;
+ }
+ if (e & 32) /* end of block */
+ {
+ Tracevv((stderr, "inflate: end of block\n"));
+ c->mode = WASH;
+ break;
+ }
+ c->mode = BADCODE; /* invalid code */
+ z->msg = "invalid literal/length code";
+ r = Z_DATA_ERROR;
+ LEAVE
+ case LENEXT: /* i: getting length extra (have base) */
+ j = c->sub.copy.get;
+ NEEDBITS(j)
+ c->len += (uInt)b & inflate_mask[j];
+ DUMPBITS(j)
+ c->sub.code.need = c->dbits;
+ c->sub.code.tree = c->dtree;
+ Tracevv((stderr, "inflate: length %u\n", c->len));
+ c->mode = DIST;
+ case DIST: /* i: get distance next */
+ j = c->sub.code.need;
+ NEEDBITS(j)
+ t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
+ DUMPBITS(t->bits)
+ e = (uInt)(t->exop);
+ if (e & 16) /* distance */
+ {
+ c->sub.copy.get = e & 15;
+ c->sub.copy.dist = t->base;
+ c->mode = DISTEXT;
+ break;
+ }
+ if ((e & 64) == 0) /* next table */
+ {
+ c->sub.code.need = e;
+ c->sub.code.tree = t->next;
+ break;
+ }
+ c->mode = BADCODE; /* invalid code */
+ z->msg = "invalid distance code";
+ r = Z_DATA_ERROR;
+ LEAVE
+ case DISTEXT: /* i: getting distance extra */
+ j = c->sub.copy.get;
+ NEEDBITS(j)
+ c->sub.copy.dist += (uInt)b & inflate_mask[j];
+ DUMPBITS(j)
+ Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist));
+ c->mode = COPY;
+ case COPY: /* o: copying bytes in window, waiting for space */
+#ifndef __TURBOC__ /* Turbo C bug for following expression */
+ f = (uInt)(q - s->window) < c->sub.copy.dist ?
+ s->end - (c->sub.copy.dist - (q - s->window)) :
+ q - c->sub.copy.dist;
+#else
+ f = q - c->sub.copy.dist;
+ if ((uInt)(q - s->window) < c->sub.copy.dist)
+ f = s->end - (c->sub.copy.dist - (q - s->window));
+#endif
+ while (c->len)
+ {
+ NEEDOUT
+ OUTBYTE(*f++)
+ if (f == s->end)
+ f = s->window;
+ c->len--;
+ }
+ c->mode = START;
+ break;
+ case LIT: /* o: got literal, waiting for output space */
+ NEEDOUT
+ OUTBYTE(c->sub.lit)
+ c->mode = START;
+ break;
+ case WASH: /* o: got eob, possibly more output */
+ FLUSH
+ if (s->read != s->write)
+ LEAVE
+ c->mode = END;
+ case END:
+ r = Z_STREAM_END;
+ LEAVE
+ case BADCODE: /* x: got error */
+ r = Z_DATA_ERROR;
+ LEAVE
+ default:
+ r = Z_STREAM_ERROR;
+ LEAVE
+ }
+}
+
+
+local void inflate_codes_free(c, z)
+inflate_codes_statef *c;
+z_stream *z;
+{
+ ZFREE(z, c, sizeof(struct inflate_codes_state));
+ Tracev((stderr, "inflate: codes free\n"));
+}
+
+/*+++++*/
+/* inflate_util.c -- data and routines common to blocks and codes
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* copy as much as possible from the sliding window to the output area */
+local int inflate_flush(s, z, r)
+inflate_blocks_statef *s;
+z_stream *z;
+int r;
+{
+ uInt n;
+ Bytef *p, *q;
+
+ /* local copies of source and destination pointers */
+ p = z->next_out;
+ q = s->read;
+
+ /* compute number of bytes to copy as far as end of window */
+ n = (uInt)((q <= s->write ? s->write : s->end) - q);
+ if (n > z->avail_out) n = z->avail_out;
+ if (n && r == Z_BUF_ERROR) r = Z_OK;
+
+ /* update counters */
+ z->avail_out -= n;
+ z->total_out += n;
+
+ /* update check information */
+ if (s->checkfn != Z_NULL)
+ s->check = (*s->checkfn)(s->check, q, n);
+
+ /* output callback */
+ if (z->outcb != Z_NULL)
+ (*z->outcb)(q, n);
+
+ /* copy as far as end of window */
+ zmemcpy(p, q, n);
+ p += n;
+ q += n;
+
+ /* see if more to copy at beginning of window */
+ if (q == s->end)
+ {
+ /* wrap pointers */
+ q = s->window;
+ if (s->write == s->end)
+ s->write = s->window;
+
+ /* compute bytes to copy */
+ n = (uInt)(s->write - q);
+ if (n > z->avail_out) n = z->avail_out;
+ if (n && r == Z_BUF_ERROR) r = Z_OK;
+
+ /* update counters */
+ z->avail_out -= n;
+ z->total_out += n;
+
+ /* update check information */
+ if (s->checkfn != Z_NULL)
+ s->check = (*s->checkfn)(s->check, q, n);
+
+ /* output callback */
+ if (z->outcb != Z_NULL)
+ (*z->outcb)(q, n);
+
+ /* copy */
+ zmemcpy(p, q, n);
+ p += n;
+ q += n;
+ }
+
+ /* update pointers */
+ z->next_out = p;
+ s->read = q;
+
+ /* done */
+ return r;
+}
+
+
+/*+++++*/
+/* inffast.c -- process literals and length/distance pairs fast
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* simplify the use of the inflate_huft type with some defines */
+#define base more.Base
+#define next more.Next
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+/* macros for bit input with no checking and for returning unused bytes */
+#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
+#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
+
+/* Called with number of bytes left to write in window at least 258
+ (the maximum string length) and number of input bytes available
+ at least ten. The ten bytes are six bytes for the longest length/
+ distance pair plus four bytes for overloading the bit buffer. */
+
+local int inflate_fast(bl, bd, tl, td, s, z)
+uInt bl, bd;
+inflate_huft *tl, *td;
+inflate_blocks_statef *s;
+z_stream *z;
+{
+ inflate_huft *t; /* temporary pointer */
+ uInt e; /* extra bits or operation */
+ uLong b; /* bit buffer */
+ uInt k; /* bits in bit buffer */
+ Bytef *p; /* input data pointer */
+ uInt n; /* bytes available there */
+ Bytef *q; /* output window write pointer */
+ uInt m; /* bytes to end of window or read pointer */
+ uInt ml; /* mask for literal/length tree */
+ uInt md; /* mask for distance tree */
+ uInt c; /* bytes to copy */
+ uInt d; /* distance back to copy from */
+ Bytef *r; /* copy source pointer */
+
+ /* load input, output, bit values */
+ LOAD
+
+ /* initialize masks */
+ ml = inflate_mask[bl];
+ md = inflate_mask[bd];
+
+ /* do until not enough input or output space for fast loop */
+ do { /* assume called with m >= 258 && n >= 10 */
+ /* get literal/length code */
+ GRABBITS(20) /* max bits for literal/length code */
+ if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
+ {
+ DUMPBITS(t->bits)
+ Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+ "inflate: * literal '%c'\n" :
+ "inflate: * literal 0x%02x\n", t->base));
+ *q++ = (Byte)t->base;
+ m--;
+ continue;
+ }
+ do {
+ DUMPBITS(t->bits)
+ if (e & 16)
+ {
+ /* get extra bits for length */
+ e &= 15;
+ c = t->base + ((uInt)b & inflate_mask[e]);
+ DUMPBITS(e)
+ Tracevv((stderr, "inflate: * length %u\n", c));
+
+ /* decode distance base of block to copy */
+ GRABBITS(15); /* max bits for distance code */
+ e = (t = td + ((uInt)b & md))->exop;
+ do {
+ DUMPBITS(t->bits)
+ if (e & 16)
+ {
+ /* get extra bits to add to distance base */
+ e &= 15;
+ GRABBITS(e) /* get extra bits (up to 13) */
+ d = t->base + ((uInt)b & inflate_mask[e]);
+ DUMPBITS(e)
+ Tracevv((stderr, "inflate: * distance %u\n", d));
+
+ /* do the copy */
+ m -= c;
+ if ((uInt)(q - s->window) >= d) /* offset before dest */
+ { /* just copy */
+ r = q - d;
+ *q++ = *r++; c--; /* minimum count is three, */
+ *q++ = *r++; c--; /* so unroll loop a little */
+ }
+ else /* else offset after destination */
+ {
+ e = d - (q - s->window); /* bytes from offset to end */
+ r = s->end - e; /* pointer to offset */
+ if (c > e) /* if source crosses, */
+ {
+ c -= e; /* copy to end of window */
+ do {
+ *q++ = *r++;
+ } while (--e);
+ r = s->window; /* copy rest from start of window */
+ }
+ }
+ do { /* copy all or what's left */
+ *q++ = *r++;
+ } while (--c);
+ break;
+ }
+ else if ((e & 64) == 0)
+ e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
+ else
+ {
+ z->msg = "invalid distance code";
+ UNGRAB
+ UPDATE
+ return Z_DATA_ERROR;
+ }
+ } while (1);
+ break;
+ }
+ if ((e & 64) == 0)
+ {
+ if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
+ {
+ DUMPBITS(t->bits)
+ Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+ "inflate: * literal '%c'\n" :
+ "inflate: * literal 0x%02x\n", t->base));
+ *q++ = (Byte)t->base;
+ m--;
+ break;
+ }
+ }
+ else if (e & 32)
+ {
+ Tracevv((stderr, "inflate: * end of block\n"));
+ UNGRAB
+ UPDATE
+ return Z_STREAM_END;
+ }
+ else
+ {
+ z->msg = "invalid literal/length code";
+ UNGRAB
+ UPDATE
+ return Z_DATA_ERROR;
+ }
+ } while (1);
+ } while (m >= 258 && n >= 10);
+
+ /* not enough input or output--restore pointers and return */
+ UNGRAB
+ UPDATE
+ return Z_OK;
+}
+
+
+/*+++++*/
+/* zutil.c -- target dependent utility functions for the compression library
+ * Copyright (C) 1995 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* From: zutil.c,v 1.8 1995/05/03 17:27:12 jloup Exp */
+
+char *zlib_version = ZLIB_VERSION;
+
+char *z_errmsg[] = {
+"stream end", /* Z_STREAM_END 1 */
+"", /* Z_OK 0 */
+"file error", /* Z_ERRNO (-1) */
+"stream error", /* Z_STREAM_ERROR (-2) */
+"data error", /* Z_DATA_ERROR (-3) */
+"insufficient memory", /* Z_MEM_ERROR (-4) */
+"buffer error", /* Z_BUF_ERROR (-5) */
+""};
+
+
+/*+++++*/
+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* From: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp */
+
+#define BASE 65521L /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf) {s1 += *buf++; s2 += s1;}
+#define DO2(buf) DO1(buf); DO1(buf);
+#define DO4(buf) DO2(buf); DO2(buf);
+#define DO8(buf) DO4(buf); DO4(buf);
+#define DO16(buf) DO8(buf); DO8(buf);
+
+/* ========================================================================= */
+uLong adler32(adler, buf, len)
+ uLong adler;
+ Bytef *buf;
+ uInt len;
+{
+ unsigned long s1 = adler & 0xffff;
+ unsigned long s2 = (adler >> 16) & 0xffff;
+ int k;
+
+ if (buf == Z_NULL) return 1L;
+
+ while (len > 0) {
+ k = len < NMAX ? len : NMAX;
+ len -= k;
+ while (k >= 16) {
+ DO16(buf);
+ k -= 16;
+ }
+ if (k != 0) do {
+ DO1(buf);
+ } while (--k);
+ s1 %= BASE;
+ s2 %= BASE;
+ }
+ return (s2 << 16) | s1;
+}
diff --git a/tools/gdb/remote.c b/tools/gdb/remote.c
new file mode 100644
index 0000000..b8b2470
--- /dev/null
+++ b/tools/gdb/remote.c
@@ -0,0 +1,928 @@
+/*
+ * taken from gdb/remote.c
+ *
+ * I am only interested in the write to memory stuff - everything else
+ * has been ripped out
+ *
+ * all the copyright notices etc have been left in
+ */
+
+/* enough so that it will compile */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+
+/*nicked from gcc..*/
+
+#ifndef alloca
+#ifdef __GNUC__
+#define alloca __builtin_alloca
+#else /* not GNU C. */
+#if (!defined (__STDC__) && defined (sparc)) || defined (__sparc__) || defined (__sparc) || defined (__sgi)
+#include <alloca.h>
+#else /* not sparc */
+#if defined (MSDOS) && !defined (__TURBOC__)
+#include <malloc.h>
+#else /* not MSDOS, or __TURBOC__ */
+#if defined(_AIX)
+#include <malloc.h>
+ #pragma alloca
+#else /* not MSDOS, __TURBOC__, or _AIX */
+#ifdef __hpux
+#endif /* __hpux */
+#endif /* not _AIX */
+#endif /* not MSDOS, or __TURBOC__ */
+#endif /* not sparc. */
+#endif /* not GNU C. */
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void* alloca(size_t);
+#ifdef __cplusplus
+}
+#endif
+#endif /* alloca not defined. */
+
+
+#include "serial.h"
+#include "error.h"
+#include "remote.h"
+#define REGISTER_BYTES 0
+#define fprintf_unfiltered fprintf
+#define fprintf_filtered fprintf
+#define fputs_unfiltered fputs
+#define fputs_filtered fputs
+#define fputc_unfiltered fputc
+#define fputc_filtered fputc
+#define printf_unfiltered printf
+#define printf_filtered printf
+#define puts_unfiltered puts
+#define puts_filtered puts
+#define putchar_unfiltered putchar
+#define putchar_filtered putchar
+#define fputstr_unfiltered(a,b,c) fputs((a), (c))
+#define gdb_stdlog stderr
+#define SERIAL_READCHAR(fd,timo) serialreadchar((fd), (timo))
+#define SERIAL_WRITE(fd, addr, len) serialwrite((fd), (addr), (len))
+#define error Error
+#define perror_with_name Perror
+#define gdb_flush fflush
+#define max(a,b) (((a)>(b))?(a):(b))
+#define min(a,b) (((a)<(b))?(a):(b))
+#define target_mourn_inferior() {}
+#define ULONGEST unsigned long
+#define CORE_ADDR unsigned long
+
+static int putpkt (char *);
+static int putpkt_binary(char *, int);
+static void getpkt (char *, int);
+
+static int remote_debug = 0, remote_register_buf_size = 0, watchdog = 0;
+
+int remote_desc = -1, remote_timeout = 10;
+
+static void
+fputstrn_unfiltered(char *s, int n, int x, FILE *fp)
+{
+ while (n-- > 0)
+ fputc(*s++, fp);
+}
+
+void
+remote_reset(void)
+{
+ SERIAL_WRITE(remote_desc, "+", 1);
+}
+
+void
+remote_continue(void)
+{
+ putpkt("c");
+}
+
+/* Remote target communications for serial-line targets in custom GDB protocol
+ Copyright 1988, 91, 92, 93, 94, 95, 96, 97, 98, 1999
+ Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+/* *INDENT-OFF* */
+/* Remote communication protocol.
+
+ A debug packet whose contents are <data>
+ is encapsulated for transmission in the form:
+
+ $ <data> # CSUM1 CSUM2
+
+ <data> must be ASCII alphanumeric and cannot include characters
+ '$' or '#'. If <data> starts with two characters followed by
+ ':', then the existing stubs interpret this as a sequence number.
+
+ CSUM1 and CSUM2 are ascii hex representation of an 8-bit
+ checksum of <data>, the most significant nibble is sent first.
+ the hex digits 0-9,a-f are used.
+
+ Receiver responds with:
+
+ + - if CSUM is correct and ready for next packet
+ - - if CSUM is incorrect
+
+ <data> is as follows:
+ Most values are encoded in ascii hex digits. Signal numbers are according
+ to the numbering in target.h.
+
+ Request Packet
+
+ set thread Hct... Set thread for subsequent operations.
+ c = 'c' for thread used in step and
+ continue; t... can be -1 for all
+ threads.
+ c = 'g' for thread used in other
+ operations. If zero, pick a thread,
+ any thread.
+ reply OK for success
+ ENN for an error.
+
+ read registers g
+ reply XX....X Each byte of register data
+ is described by two hex digits.
+ Registers are in the internal order
+ for GDB, and the bytes in a register
+ are in the same order the machine uses.
+ or ENN for an error.
+
+ write regs GXX..XX Each byte of register data
+ is described by two hex digits.
+ reply OK for success
+ ENN for an error
+
+ write reg Pn...=r... Write register n... with value r...,
+ which contains two hex digits for each
+ byte in the register (target byte
+ order).
+ reply OK for success
+ ENN for an error
+ (not supported by all stubs).
+
+ read mem mAA..AA,LLLL AA..AA is address, LLLL is length.
+ reply XX..XX XX..XX is mem contents
+ Can be fewer bytes than requested
+ if able to read only part of the data.
+ or ENN NN is errno
+
+ write mem MAA..AA,LLLL:XX..XX
+ AA..AA is address,
+ LLLL is number of bytes,
+ XX..XX is data
+ reply OK for success
+ ENN for an error (this includes the case
+ where only part of the data was
+ written).
+
+ write mem XAA..AA,LLLL:XX..XX
+ (binary) AA..AA is address,
+ LLLL is number of bytes,
+ XX..XX is binary data
+ reply OK for success
+ ENN for an error
+
+ continue cAA..AA AA..AA is address to resume
+ If AA..AA is omitted,
+ resume at same address.
+
+ step sAA..AA AA..AA is address to resume
+ If AA..AA is omitted,
+ resume at same address.
+
+ continue with Csig;AA..AA Continue with signal sig (hex signal
+ signal number). If ;AA..AA is omitted,
+ resume at same address.
+
+ step with Ssig;AA..AA Like 'C' but step not continue.
+ signal
+
+ last signal ? Reply the current reason for stopping.
+ This is the same reply as is generated
+ for step or cont : SAA where AA is the
+ signal number.
+
+ detach D Reply OK.
+
+ There is no immediate reply to step or cont.
+ The reply comes when the machine stops.
+ It is SAA AA is the signal number.
+
+ or... TAAn...:r...;n...:r...;n...:r...;
+ AA = signal number
+ n... = register number (hex)
+ r... = register contents
+ n... = `thread'
+ r... = thread process ID. This is
+ a hex integer.
+ n... = other string not starting
+ with valid hex digit.
+ gdb should ignore this n,r pair
+ and go on to the next. This way
+ we can extend the protocol.
+ or... WAA The process exited, and AA is
+ the exit status. This is only
+ applicable for certains sorts of
+ targets.
+ or... XAA The process terminated with signal
+ AA.
+ or (obsolete) NAA;tttttttt;dddddddd;bbbbbbbb
+ AA = signal number
+ tttttttt = address of symbol "_start"
+ dddddddd = base of data section
+ bbbbbbbb = base of bss section.
+ Note: only used by Cisco Systems
+ targets. The difference between this
+ reply and the "qOffsets" query is that
+ the 'N' packet may arrive spontaneously
+ whereas the 'qOffsets' is a query
+ initiated by the host debugger.
+ or... OXX..XX XX..XX is hex encoding of ASCII data. This
+ can happen at any time while the
+ program is running and the debugger
+ should continue to wait for
+ 'W', 'T', etc.
+
+ thread alive TXX Find out if the thread XX is alive.
+ reply OK thread is still alive
+ ENN thread is dead
+
+ remote restart RXX Restart the remote server
+
+ extended ops ! Use the extended remote protocol.
+ Sticky -- only needs to be set once.
+
+ kill request k
+
+ toggle debug d toggle debug flag (see 386 & 68k stubs)
+ reset r reset -- see sparc stub.
+ reserved <other> On other requests, the stub should
+ ignore the request and send an empty
+ response ($#<checksum>). This way
+ we can extend the protocol and GDB
+ can tell whether the stub it is
+ talking to uses the old or the new.
+ search tAA:PP,MM Search backwards starting at address
+ AA for a match with pattern PP and
+ mask MM. PP and MM are 4 bytes.
+ Not supported by all stubs.
+
+ general query qXXXX Request info about XXXX.
+ general set QXXXX=yyyy Set value of XXXX to yyyy.
+ query sect offs qOffsets Get section offsets. Reply is
+ Text=xxx;Data=yyy;Bss=zzz
+
+ Responses can be run-length encoded to save space. A '*' means that
+ the next character is an ASCII encoding giving a repeat count which
+ stands for that many repititions of the character preceding the '*'.
+ The encoding is n+29, yielding a printable character where n >=3
+ (which is where rle starts to win). Don't use an n > 126.
+
+ So
+ "0* " means the same as "0000". */
+/* *INDENT-ON* */
+
+/* This variable (available to the user via "set remotebinarydownload")
+ dictates whether downloads are sent in binary (via the 'X' packet).
+ We assume that the stub can, and attempt to do it. This will be cleared if
+ the stub does not understand it. This switch is still needed, though
+ in cases when the packet is supported in the stub, but the connection
+ does not allow it (i.e., 7-bit serial connection only). */
+static int remote_binary_download = 1;
+
+/* Have we already checked whether binary downloads work? */
+static int remote_binary_checked;
+
+/* Maximum number of bytes to read/write at once. The value here
+ is chosen to fill up a packet (the headers account for the 32). */
+#define MAXBUFBYTES(N) (((N)-32)/2)
+
+/* Having this larger than 400 causes us to be incompatible with m68k-stub.c
+ and i386-stub.c. Normally, no one would notice because it only matters
+ for writing large chunks of memory (e.g. in downloads). Also, this needs
+ to be more than 400 if required to hold the registers (see below, where
+ we round it up based on REGISTER_BYTES). */
+/* Round up PBUFSIZ to hold all the registers, at least. */
+#define PBUFSIZ ((REGISTER_BYTES > MAXBUFBYTES (400)) \
+ ? (REGISTER_BYTES * 2 + 32) \
+ : 400)
+
+
+/* This variable sets the number of bytes to be written to the target
+ in a single packet. Normally PBUFSIZ is satisfactory, but some
+ targets need smaller values (perhaps because the receiving end
+ is slow). */
+
+static int remote_write_size = 0x7fffffff;
+
+/* This variable sets the number of bits in an address that are to be
+ sent in a memory ("M" or "m") packet. Normally, after stripping
+ leading zeros, the entire address would be sent. This variable
+ restricts the address to REMOTE_ADDRESS_SIZE bits. HISTORY: The
+ initial implementation of remote.c restricted the address sent in
+ memory packets to ``host::sizeof long'' bytes - (typically 32
+ bits). Consequently, for 64 bit targets, the upper 32 bits of an
+ address was never sent. Since fixing this bug may cause a break in
+ some remote targets this variable is principly provided to
+ facilitate backward compatibility. */
+
+static int remote_address_size;
+
+/* Convert hex digit A to a number. */
+
+static int
+fromhex (int a)
+{
+ if (a >= '0' && a <= '9')
+ return a - '0';
+ else if (a >= 'a' && a <= 'f')
+ return a - 'a' + 10;
+ else if (a >= 'A' && a <= 'F')
+ return a - 'A' + 10;
+ else {
+ error ("Reply contains invalid hex digit %d", a);
+ return -1;
+ }
+}
+
+/* Convert number NIB to a hex digit. */
+
+static int
+tohex (int nib)
+{
+ if (nib < 10)
+ return '0' + nib;
+ else
+ return 'a' + nib - 10;
+}
+
+/* Return the number of hex digits in num. */
+
+static int
+hexnumlen (ULONGEST num)
+{
+ int i;
+
+ for (i = 0; num != 0; i++)
+ num >>= 4;
+
+ return max (i, 1);
+}
+
+/* Set BUF to the hex digits representing NUM. */
+
+static int
+hexnumstr (char *buf, ULONGEST num)
+{
+ int i;
+ int len = hexnumlen (num);
+
+ buf[len] = '\0';
+
+ for (i = len - 1; i >= 0; i--)
+ {
+ buf[i] = "0123456789abcdef"[(num & 0xf)];
+ num >>= 4;
+ }
+
+ return len;
+}
+
+/* Mask all but the least significant REMOTE_ADDRESS_SIZE bits. */
+
+static CORE_ADDR
+remote_address_masked (CORE_ADDR addr)
+{
+ if (remote_address_size > 0
+ && remote_address_size < (sizeof (ULONGEST) * 8))
+ {
+ /* Only create a mask when that mask can safely be constructed
+ in a ULONGEST variable. */
+ ULONGEST mask = 1;
+ mask = (mask << remote_address_size) - 1;
+ addr &= mask;
+ }
+ return addr;
+}
+
+/* Determine whether the remote target supports binary downloading.
+ This is accomplished by sending a no-op memory write of zero length
+ to the target at the specified address. It does not suffice to send
+ the whole packet, since many stubs strip the eighth bit and subsequently
+ compute a wrong checksum, which causes real havoc with remote_write_bytes.
+
+ NOTE: This can still lose if the serial line is not eight-bit clean. In
+ cases like this, the user should clear "remotebinarydownload". */
+static void
+check_binary_download (CORE_ADDR addr)
+{
+ if (remote_binary_download && !remote_binary_checked)
+ {
+ char *buf = alloca (PBUFSIZ);
+ char *p;
+ remote_binary_checked = 1;
+
+ p = buf;
+ *p++ = 'X';
+ p += hexnumstr (p, (ULONGEST) addr);
+ *p++ = ',';
+ p += hexnumstr (p, (ULONGEST) 0);
+ *p++ = ':';
+ *p = '\0';
+
+ putpkt_binary (buf, (int) (p - buf));
+ getpkt (buf, 0);
+
+ if (buf[0] == '\0')
+ remote_binary_download = 0;
+ }
+
+ if (remote_debug)
+ {
+ if (remote_binary_download)
+ fprintf_unfiltered (gdb_stdlog,
+ "binary downloading suppported by target\n");
+ else
+ fprintf_unfiltered (gdb_stdlog,
+ "binary downloading NOT suppported by target\n");
+ }
+}
+
+/* Write memory data directly to the remote machine.
+ This does not inform the data cache; the data cache uses this.
+ MEMADDR is the address in the remote memory space.
+ MYADDR is the address of the buffer in our space.
+ LEN is the number of bytes.
+
+ Returns number of bytes transferred, or 0 for error. */
+
+int
+remote_write_bytes (memaddr, myaddr, len)
+ CORE_ADDR memaddr;
+ char *myaddr;
+ int len;
+{
+ unsigned char *buf = alloca (PBUFSIZ);
+ int max_buf_size; /* Max size of packet output buffer */
+ int origlen;
+ extern int verbose;
+
+ /* Verify that the target can support a binary download */
+ check_binary_download (memaddr);
+
+ /* Chop the transfer down if necessary */
+
+ max_buf_size = min (remote_write_size, PBUFSIZ);
+ if (remote_register_buf_size != 0)
+ max_buf_size = min (max_buf_size, remote_register_buf_size);
+
+ /* Subtract header overhead from max payload size - $M<memaddr>,<len>:#nn */
+ max_buf_size -= 2 + hexnumlen (memaddr + len - 1) + 1 + hexnumlen (len) + 4;
+
+ origlen = len;
+ while (len > 0)
+ {
+ unsigned char *p, *plen;
+ int todo;
+ int i;
+
+ /* construct "M"<memaddr>","<len>":" */
+ /* sprintf (buf, "M%lx,%x:", (unsigned long) memaddr, todo); */
+ memaddr = remote_address_masked (memaddr);
+ p = buf;
+ if (remote_binary_download)
+ {
+ *p++ = 'X';
+ todo = min (len, max_buf_size);
+ }
+ else
+ {
+ *p++ = 'M';
+ todo = min (len, max_buf_size / 2); /* num bytes that will fit */
+ }
+
+ p += hexnumstr ((char *)p, (ULONGEST) memaddr);
+ *p++ = ',';
+
+ plen = p; /* remember where len field goes */
+ p += hexnumstr ((char *)p, (ULONGEST) todo);
+ *p++ = ':';
+ *p = '\0';
+
+ /* We send target system values byte by byte, in increasing byte
+ addresses, each byte encoded as two hex characters (or one
+ binary character). */
+ if (remote_binary_download)
+ {
+ int escaped = 0;
+ for (i = 0;
+ (i < todo) && (i + escaped) < (max_buf_size - 2);
+ i++)
+ {
+ switch (myaddr[i] & 0xff)
+ {
+ case '$':
+ case '#':
+ case 0x7d:
+ /* These must be escaped */
+ escaped++;
+ *p++ = 0x7d;
+ *p++ = (myaddr[i] & 0xff) ^ 0x20;
+ break;
+ default:
+ *p++ = myaddr[i] & 0xff;
+ break;
+ }
+ }
+
+ if (i < todo)
+ {
+ /* Escape chars have filled up the buffer prematurely,
+ and we have actually sent fewer bytes than planned.
+ Fix-up the length field of the packet. */
+
+ /* FIXME: will fail if new len is a shorter string than
+ old len. */
+
+ plen += hexnumstr ((char *)plen, (ULONGEST) i);
+ *plen++ = ':';
+ }
+ }
+ else
+ {
+ for (i = 0; i < todo; i++)
+ {
+ *p++ = tohex ((myaddr[i] >> 4) & 0xf);
+ *p++ = tohex (myaddr[i] & 0xf);
+ }
+ *p = '\0';
+ }
+
+ putpkt_binary ((char *)buf, (int) (p - buf));
+ getpkt ((char *)buf, 0);
+
+ if (buf[0] == 'E')
+ {
+ /* There is no correspondance between what the remote protocol uses
+ for errors and errno codes. We would like a cleaner way of
+ representing errors (big enough to include errno codes, bfd_error
+ codes, and others). But for now just return EIO. */
+ errno = EIO;
+ return 0;
+ }
+
+ /* Increment by i, not by todo, in case escape chars
+ caused us to send fewer bytes than we'd planned. */
+ myaddr += i;
+ memaddr += i;
+ len -= i;
+
+ if (verbose)
+ putc('.', stderr);
+ }
+ return origlen;
+}
+
+/* Stuff for dealing with the packets which are part of this protocol.
+ See comment at top of file for details. */
+
+/* Read a single character from the remote end, masking it down to 7 bits. */
+
+static int
+readchar (int timeout)
+{
+ int ch;
+
+ ch = SERIAL_READCHAR (remote_desc, timeout);
+
+ switch (ch)
+ {
+ case SERIAL_EOF:
+ error ("Remote connection closed");
+ case SERIAL_ERROR:
+ perror_with_name ("Remote communication error");
+ case SERIAL_TIMEOUT:
+ return ch;
+ default:
+ return ch & 0x7f;
+ }
+}
+
+static int
+putpkt (buf)
+ char *buf;
+{
+ return putpkt_binary (buf, strlen (buf));
+}
+
+/* Send a packet to the remote machine, with error checking. The data
+ of the packet is in BUF. The string in BUF can be at most PBUFSIZ - 5
+ to account for the $, # and checksum, and for a possible /0 if we are
+ debugging (remote_debug) and want to print the sent packet as a string */
+
+static int
+putpkt_binary (buf, cnt)
+ char *buf;
+ int cnt;
+{
+ int i;
+ unsigned char csum = 0;
+ char *buf2 = alloca (PBUFSIZ);
+ char *junkbuf = alloca (PBUFSIZ);
+
+ int ch;
+ int tcount = 0;
+ char *p;
+
+ /* Copy the packet into buffer BUF2, encapsulating it
+ and giving it a checksum. */
+
+ if (cnt > BUFSIZ - 5) /* Prosanity check */
+ abort ();
+
+ p = buf2;
+ *p++ = '$';
+
+ for (i = 0; i < cnt; i++)
+ {
+ csum += buf[i];
+ *p++ = buf[i];
+ }
+ *p++ = '#';
+ *p++ = tohex ((csum >> 4) & 0xf);
+ *p++ = tohex (csum & 0xf);
+
+ /* Send it over and over until we get a positive ack. */
+
+ while (1)
+ {
+ int started_error_output = 0;
+
+ if (remote_debug)
+ {
+ *p = '\0';
+ fprintf_unfiltered (gdb_stdlog, "Sending packet: ");
+ fputstrn_unfiltered (buf2, p - buf2, 0, gdb_stdlog);
+ fprintf_unfiltered (gdb_stdlog, "...");
+ gdb_flush (gdb_stdlog);
+ }
+ if (SERIAL_WRITE (remote_desc, buf2, p - buf2))
+ perror_with_name ("putpkt: write failed");
+
+ /* read until either a timeout occurs (-2) or '+' is read */
+ while (1)
+ {
+ ch = readchar (remote_timeout);
+
+ if (remote_debug)
+ {
+ switch (ch)
+ {
+ case '+':
+ case SERIAL_TIMEOUT:
+ case '$':
+ if (started_error_output)
+ {
+ putchar_unfiltered ('\n');
+ started_error_output = 0;
+ }
+ }
+ }
+
+ switch (ch)
+ {
+ case '+':
+ if (remote_debug)
+ fprintf_unfiltered (gdb_stdlog, "Ack\n");
+ return 1;
+ case SERIAL_TIMEOUT:
+ tcount++;
+ if (tcount > 3)
+ return 0;
+ break; /* Retransmit buffer */
+ case '$':
+ {
+ /* It's probably an old response, and we're out of sync.
+ Just gobble up the packet and ignore it. */
+ getpkt (junkbuf, 0);
+ continue; /* Now, go look for + */
+ }
+ default:
+ if (remote_debug)
+ {
+ if (!started_error_output)
+ {
+ started_error_output = 1;
+ fprintf_unfiltered (gdb_stdlog, "putpkt: Junk: ");
+ }
+ fputc_unfiltered (ch & 0177, gdb_stdlog);
+ }
+ continue;
+ }
+ break; /* Here to retransmit */
+ }
+
+#if 0
+ /* This is wrong. If doing a long backtrace, the user should be
+ able to get out next time we call QUIT, without anything as
+ violent as interrupt_query. If we want to provide a way out of
+ here without getting to the next QUIT, it should be based on
+ hitting ^C twice as in remote_wait. */
+ if (quit_flag)
+ {
+ quit_flag = 0;
+ interrupt_query ();
+ }
+#endif
+ }
+}
+
+/* Come here after finding the start of the frame. Collect the rest
+ into BUF, verifying the checksum, length, and handling run-length
+ compression. Returns 0 on any error, 1 on success. */
+
+static int
+read_frame (char *buf)
+{
+ unsigned char csum;
+ char *bp;
+ int c;
+
+ csum = 0;
+ bp = buf;
+
+ while (1)
+ {
+ c = readchar (remote_timeout);
+
+ switch (c)
+ {
+ case SERIAL_TIMEOUT:
+ if (remote_debug)
+ fputs_filtered ("Timeout in mid-packet, retrying\n", gdb_stdlog);
+ return 0;
+ case '$':
+ if (remote_debug)
+ fputs_filtered ("Saw new packet start in middle of old one\n",
+ gdb_stdlog);
+ return 0; /* Start a new packet, count retries */
+ case '#':
+ {
+ unsigned char pktcsum;
+
+ *bp = '\000';
+
+ pktcsum = fromhex (readchar (remote_timeout)) << 4;
+ pktcsum |= fromhex (readchar (remote_timeout));
+
+ if (csum == pktcsum)
+ {
+ return 1;
+ }
+
+ if (remote_debug)
+ {
+ fprintf_filtered (gdb_stdlog,
+ "Bad checksum, sentsum=0x%x, csum=0x%x, buf=",
+ pktcsum, csum);
+ fputs_filtered (buf, gdb_stdlog);
+ fputs_filtered ("\n", gdb_stdlog);
+ }
+ return 0;
+ }
+ case '*': /* Run length encoding */
+ csum += c;
+ c = readchar (remote_timeout);
+ csum += c;
+ c = c - ' ' + 3; /* Compute repeat count */
+
+ if (c > 0 && c < 255 && bp + c - 1 < buf + PBUFSIZ - 1)
+ {
+ memset (bp, *(bp - 1), c);
+ bp += c;
+ continue;
+ }
+
+ *bp = '\0';
+ printf_filtered ("Repeat count %d too large for buffer: ", c);
+ puts_filtered (buf);
+ puts_filtered ("\n");
+ return 0;
+ default:
+ if (bp < buf + PBUFSIZ - 1)
+ {
+ *bp++ = c;
+ csum += c;
+ continue;
+ }
+
+ *bp = '\0';
+ puts_filtered ("Remote packet too long: ");
+ puts_filtered (buf);
+ puts_filtered ("\n");
+
+ return 0;
+ }
+ }
+}
+
+/* Read a packet from the remote machine, with error checking, and
+ store it in BUF. BUF is expected to be of size PBUFSIZ. If
+ FOREVER, wait forever rather than timing out; this is used while
+ the target is executing user code. */
+
+static void
+getpkt (buf, forever)
+ char *buf;
+ int forever;
+{
+ int c;
+ int tries;
+ int timeout;
+ int val;
+
+ strcpy (buf, "timeout");
+
+ if (forever)
+ {
+ timeout = watchdog > 0 ? watchdog : -1;
+ }
+
+ else
+ timeout = remote_timeout;
+
+#define MAX_TRIES 3
+
+ for (tries = 1; tries <= MAX_TRIES; tries++)
+ {
+ /* This can loop forever if the remote side sends us characters
+ continuously, but if it pauses, we'll get a zero from readchar
+ because of timeout. Then we'll count that as a retry. */
+
+ /* Note that we will only wait forever prior to the start of a packet.
+ After that, we expect characters to arrive at a brisk pace. They
+ should show up within remote_timeout intervals. */
+
+ do
+ {
+ c = readchar (timeout);
+
+ if (c == SERIAL_TIMEOUT)
+ {
+ if (forever) /* Watchdog went off. Kill the target. */
+ {
+ target_mourn_inferior ();
+ error ("Watchdog has expired. Target detached.\n");
+ }
+ if (remote_debug)
+ fputs_filtered ("Timed out.\n", gdb_stdlog);
+ goto retry;
+ }
+ }
+ while (c != '$');
+
+ /* We've found the start of a packet, now collect the data. */
+
+ val = read_frame (buf);
+
+ if (val == 1)
+ {
+ if (remote_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, "Packet received: ");
+ fputstr_unfiltered (buf, 0, gdb_stdlog);
+ fprintf_unfiltered (gdb_stdlog, "\n");
+ }
+ SERIAL_WRITE (remote_desc, "+", 1);
+ return;
+ }
+
+ /* Try the whole thing again. */
+ retry:
+ SERIAL_WRITE (remote_desc, "-", 1);
+ }
+
+ /* We have tried hard enough, and just can't receive the packet. Give up. */
+
+ printf_unfiltered ("Ignoring packet error, continuing...\n");
+ SERIAL_WRITE (remote_desc, "+", 1);
+}