commit 49b633b3d3c49ec91e8f00f0f1bbb34bb32a2269
author Felipe Balbi <balbi@ti.com> Thu Jun 26 16:38:05 2014 -0500
committer Tom Rini <trini@ti.com> Mon Jul 07 19:42:34 2014 -0400
tree 551b14c9a64dadd10f5a36956b1e807a47f82c66
parent a8b0f9b685072e1d3acd01741e7db6833b445b2a

board: ti: dra7xx: add mux data for UART3

J6 EVM can be built with UART3 as console, but currently
there's nothing muxing UART3 correctly. Likely this only
works because, based on commit log, author was only testing
with UART3 boot and - I assume - ROM code leave UART3 correctly
muxed in that case.

If we want to boot from MMC and still use UART3 as console,
then we need to mux those signals correctly.

Signed-off-by: Felipe Balbi <balbi@ti.com>

board/ti/dra7xx/mux_data.h

diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 38de9d5..c9e202a 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -31,10 +31,15 @@
 	{GPMC_A26, (IEN | PTU | PDIS | M1)},	/* mmc2_dat2 */
 	{GPMC_A27, (IEN | PTU | PDIS | M1)},	/* mmc2_dat3 */
 	{GPMC_CS1, (IEN | PTU | PDIS | M1)},	/* mmm2_cmd */
+#if (CONFIG_CONS_INDEX == 1)
 	{UART1_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_RXD */
 	{UART1_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_TXD */
 	{UART1_CTSN, (IEN | PTU | PDIS | M3)},	/* UART1_CTSN */
 	{UART1_RTSN, (IEN | PTU | PDIS | M3)},	/* UART1_RTSN */
+#elif (CONFIG_CONS_INDEX == 3)
+	{UART3_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_RXD */
+	{UART3_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_TXD */
+#endif
 	{I2C1_SDA, (IEN | PTU | PDIS | M0)},	/* I2C1_SDA */
 	{I2C1_SCL, (IEN | PTU | PDIS | M0)},	/* I2C1_SCL */
 	{MDIO_MCLK, (PTU | PEN | M0)},		/* MDIO_MCLK  */