ARM: AM43xx: mux: Update mux data
Updating the mux data for UART, adding data for i2c0 and mmc.
And also updating pad_signals structure.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
diff --git a/arch/arm/include/asm/arch-am33xx/mux_am43xx.h b/arch/arm/include/asm/arch-am33xx/mux_am43xx.h
index 0206912..98fc2b5 100644
--- a/arch/arm/include/asm/arch-am33xx/mux_am43xx.h
+++ b/arch/arm/include/asm/arch-am33xx/mux_am43xx.h
@@ -137,6 +137,51 @@
int mcasp0_fsr;
int mcasp0_axr1;
int mcasp0_ahclkx;
+ int xdma_event_intr0;
+ int xdma_event_intr1;
+ int nresetin_out;
+ int porz;
+ int nnmi;
+ int osc0_in;
+ int osc0_out;
+ int rsvd1;
+ int tms;
+ int tdi;
+ int tdo;
+ int tck;
+ int ntrst;
+ int emu0;
+ int emu1;
+ int osc1_in;
+ int osc1_out;
+ int pmic_power_en;
+ int rtc_porz;
+ int rsvd2;
+ int ext_wakeup;
+ int enz_kaldo_1p8v;
+ int usb0_dm;
+ int usb0_dp;
+ int usb0_ce;
+ int usb0_id;
+ int usb0_vbus;
+ int usb0_drvvbus;
+ int usb1_dm;
+ int usb1_dp;
+ int usb1_ce;
+ int usb1_id;
+ int usb1_vbus;
+ int usb1_drvvbus;
+ int ddr_resetn;
+ int ddr_csn0;
+ int ddr_cke;
+ int ddr_ck;
+ int ddr_nck;
+ int ddr_casn;
+ int ddr_rasn;
+ int ddr_wen;
+ int ddr_ba0;
+ int ddr_ba1;
+ int ddr_ba2;
};
#endif /* _MUX_AM43XX_H_ */
diff --git a/board/ti/am43xx/mux.c b/board/ti/am43xx/mux.c
index 700e9a7..46bad01 100644
--- a/board/ti/am43xx/mux.c
+++ b/board/ti/am43xx/mux.c
@@ -12,8 +12,24 @@
#include "board.h"
static struct module_pin_mux uart0_pin_mux[] = {
- {OFFSET(uart0_rxd), (MODE(0) | RXACTIVE)}, /* UART0_RXD */
- {OFFSET(uart0_txd), (MODE(0))}, /* UART0_TXD */
+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)},
+ {OFFSET(uart0_txd), (MODE(0) | PULLUDDIS | PULLUP_EN | SLEWCTRL)},
+ {-1},
+};
+
+static struct module_pin_mux mmc0_pin_mux[] = {
+ {OFFSET(mmc0_clk), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* MMC0_CLK */
+ {OFFSET(mmc0_cmd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_CMD */
+ {OFFSET(mmc0_dat0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT0 */
+ {OFFSET(mmc0_dat1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT1 */
+ {OFFSET(mmc0_dat2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT2 */
+ {OFFSET(mmc0_dat3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT3 */
+ {-1},
+};
+
+static struct module_pin_mux i2c0_pin_mux[] = {
+ {OFFSET(i2c0_sda), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)},
+ {OFFSET(i2c0_scl), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)},
{-1},
};
@@ -24,4 +40,6 @@
void enable_board_pin_mux(void)
{
+ configure_module_pin_mux(mmc0_pin_mux);
+ configure_module_pin_mux(i2c0_pin_mux);
}