ARM: OMAP4/5: clocks: Add the required OPP settings as per the latest addendum
Change OPP settings as per the latest 0.5 version of
addendum for OMAP5430 ES2.0. omap4/hw_data.c is touched
here to add dummy dividers.
While here correcting OPP_NOM mpu, core frequency for
OMAP4430 ES2.x
Note that OMAP5430 ES1.0 support is still kept alive and
would be removed in a cleanup later.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Cc: Tom Rini <trini@ti.com>
Cc: Nishanth Menon <nm@ti.com>
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
index 15362ae..6ee40be 100644
--- a/arch/arm/include/asm/arch-omap5/clocks.h
+++ b/arch/arm/include/asm/arch-omap5/clocks.h
@@ -176,9 +176,9 @@
/* CM_MPU_MPU_CLKCTRL */
#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24
-#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24)
-#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 25
-#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25)
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (3 << 24)
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 26
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 26)
/* CM_WKUPAON_SCRM_CLKCTRL */
#define OPTFCLKEN_SCRM_PER_SHIFT 9
@@ -201,12 +201,25 @@
#define SMPS_REG_ADDR_8_CORE 0x37
/* PALMAS VOLTAGE SETTINGS in mv for OPP_NOMINAL */
-#define VDD_MPU 1000
-#define VDD_MM 1000
+/* ES1.0 settings */
+#define VDD_MPU 1040
+#define VDD_MM 1040
#define VDD_CORE 1040
-#define VDD_MPU_5432 1150
-#define VDD_MM_5432 1150
-#define VDD_CORE_5432 1150
+
+#define VDD_MPU_LOW 890
+#define VDD_MM_LOW 890
+#define VDD_CORE_LOW 890
+
+/* ES2.0 settings */
+#define VDD_MPU_ES2 1060
+#define VDD_MM_ES2 1025
+#define VDD_CORE_ES2 1040
+
+#define VDD_MPU_ES2_HIGH 1250
+#define VDD_MM_ES2_OD 1120
+
+#define VDD_MPU_ES2_LOW 880
+#define VDD_MM_ES2_LOW 880
/* Standard offset is 0.5v expressed in uv */
#define PALMAS_SMPS_BASE_VOLT_UV 500000