Consolidate bool type
'bool' is defined in random places. This patch consolidates them into a
single header file include/linux/types.h, using stdbool.h introduced in C99.
All other #define, typedef and enum are removed. They are all consistent with
true = 1, false = 0.
Replace FALSE, False with false. Replace TRUE, True with true.
Skip *.py, *.php, lib/* files.
Signed-off-by: York Sun <yorksun@freescale.com>
diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
index 1bbae50..6b93c2b 100644
--- a/drivers/net/e1000.h
+++ b/drivers/net/e1000.h
@@ -89,11 +89,6 @@
int argc, char * const argv[]);
#endif
-typedef enum {
- FALSE = 0,
- TRUE = 1
-} boolean_t;
-
/* Enumerated types specific to the e1000 hardware */
/* Media Access Controlers */
typedef enum {
@@ -340,7 +335,7 @@
Control and Address */
#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special
control register */
-#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False
+#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive false
Carrier Counter */
#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnet
Counter */
@@ -1040,14 +1035,14 @@
};
struct e1000_eeprom_info {
- e1000_eeprom_type type;
- uint16_t word_size;
- uint16_t opcode_bits;
- uint16_t address_bits;
- uint16_t delay_usec;
- uint16_t page_size;
- boolean_t use_eerd;
- boolean_t use_eewr;
+e1000_eeprom_type type;
+ uint16_t word_size;
+ uint16_t opcode_bits;
+ uint16_t address_bits;
+ uint16_t delay_usec;
+ uint16_t page_size;
+ bool use_eerd;
+ bool use_eewr;
};
typedef enum {
@@ -1150,20 +1145,20 @@
#if 0
uint8_t perm_mac_addr[NODE_ADDRESS_SIZE];
#endif
- boolean_t disable_polarity_correction;
- boolean_t speed_downgraded;
- boolean_t get_link_status;
- boolean_t tbi_compatibility_en;
- boolean_t tbi_compatibility_on;
- boolean_t fc_strict_ieee;
- boolean_t fc_send_xon;
- boolean_t report_tx_early;
- boolean_t phy_reset_disable;
- boolean_t initialize_hw_bits_disable;
+ bool disable_polarity_correction;
+ bool speed_downgraded;
+ bool get_link_status;
+ bool tbi_compatibility_en;
+ bool tbi_compatibility_on;
+ bool fc_strict_ieee;
+ bool fc_send_xon;
+ bool report_tx_early;
+ bool phy_reset_disable;
+ bool initialize_hw_bits_disable;
#if 0
- boolean_t adaptive_ifs;
- boolean_t ifs_params_forced;
- boolean_t in_ifs_mode;
+ bool adaptive_ifs;
+ bool ifs_params_forced;
+ bool in_ifs_mode;
#endif
e1000_smart_speed smart_speed;
e1000_dsp_config dsp_config_state;
@@ -1860,11 +1855,11 @@
* Typical use:
* ...
* if (TBI_ACCEPT) {
- * accept_frame = TRUE;
+ * accept_frame = true;
* e1000_tbi_adjust_stats(adapter, MacAddress);
* frame_length--;
* } else {
- * accept_frame = FALSE;
+ * accept_frame = false;
* }
* ...
*/
@@ -2080,7 +2075,7 @@
#define GG82563_PSSR2_ENERGY_DETECT_CHANGED 0x0010 /* 1=Energy Detect Changed */
#define GG82563_PSSR2_DOWNSHIFT_INTERRUPT 0x0020 /* 1=Downshift Detected */
#define GG82563_PSSR2_MDI_CROSSOVER_CHANGE 0x0040 /* 1=Crossover Changed */
-#define GG82563_PSSR2_FALSE_CARRIER 0x0100 /* 1=False Carrier */
+#define GG82563_PSSR2_FALSE_CARRIER 0x0100 /* 1=false Carrier */
#define GG82563_PSSR2_SYMBOL_ERROR 0x0200 /* 1=Symbol Error */
#define GG82563_PSSR2_LINK_STATUS_CHANGED 0x0400 /* 1=Link Status Changed */
#define GG82563_PSSR2_AUTO_NEG_COMPLETED 0x0800 /* 1=Auto-Neg Completed */