arm: ls1021a: Add sata support on qds and twr board
Freescale ARM-based Layerscape LS102xA contain a SATA controller
which comply with the serial ATA 3.0 specification and the
AHCI 1.3 specification.
This patch adds SATA feature on ls1021aqds and ls1021atwr boards.
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index bcaf7bf..f066480 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -79,6 +79,21 @@
#define CONFIG_SYS_PCIE2_PHYS_ADDR (CONFIG_SYS_PCIE2_PHYS_BASE + \
CONFIG_SYS_PCIE2_VIRT_ADDR)
+/* SATA */
+#define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000)
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_FSL_ERRATUM_A008407
+
#ifdef CONFIG_DDR_SPD
#define CONFIG_SYS_FSL_DDR_BE
#define CONFIG_VERY_BIG_RAM
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index fbd06ba..09ed980 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -398,4 +398,28 @@
u8 res_e004[0x10000 - 0xe004];
};
+/* AHCI (sata) register map */
+struct ccsr_ahci {
+ u32 res1[0xa4/4]; /* 0x0 - 0xa4 */
+ u32 pcfg; /* port config */
+ u32 ppcfg; /* port phy1 config */
+ u32 pp2c; /* port phy2 config */
+ u32 pp3c; /* port phy3 config */
+ u32 pp4c; /* port phy4 config */
+ u32 pp5c; /* port phy5 config */
+ u32 paxic; /* port AXI config */
+ u32 axicc; /* AXI cache control */
+ u32 axipc; /* AXI PROT control */
+ u32 ptc; /* port Trans Config */
+ u32 pts; /* port Trans Status */
+ u32 plc; /* port link config */
+ u32 plc1; /* port link config1 */
+ u32 plc2; /* port link config2 */
+ u32 pls; /* port link status */
+ u32 pls1; /* port link status1 */
+ u32 pcmdc; /* port CMD config */
+ u32 ppcs; /* port phy control status */
+ u32 pberr; /* port 0/1 BIST error */
+ u32 cmds; /* port 0/1 CMD status error */
+};
#endif /* __ASM_ARCH_LS102XA_IMMAP_H_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h
new file mode 100644
index 0000000..d097a6a
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h
@@ -0,0 +1,11 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FSL_SATA_H_
+#define __FSL_SATA_H_
+
+int ls1021a_sata_init(void);
+#endif