Patch by Mathijs Haarman, 08 May 2003:
Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
diff --git a/drivers/lan91c96.c b/drivers/lan91c96.c
new file mode 100644
index 0000000..76b0c53
--- /dev/null
+++ b/drivers/lan91c96.c
@@ -0,0 +1,858 @@
+/*------------------------------------------------------------------------
+ * lan91c96.c
+ * This is a driver for SMSC's LAN91C96 single-chip Ethernet device, based
+ * on the SMC91111 driver from U-boot.
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Rolf Offermanns <rof@sysgo.de>
+ *
+ * Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
+ * Developed by Simple Network Magic Corporation (SNMC)
+ * Copyright (C) 1996 by Erik Stahlman (ES)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Information contained in this file was obtained from the LAN91C96
+ * manual from SMC. To get a copy, if you really want one, you can find
+ * information under www.smsc.com.
+ *
+ *
+ * "Features" of the SMC chip:
+ * 6144 byte packet memory. ( for the 91C96 )
+ * EEPROM for configuration
+ * AUI/TP selection ( mine has 10Base2/10BaseT select )
+ *
+ * Arguments:
+ * io = for the base address
+ * irq = for the IRQ
+ *
+ * author:
+ * Erik Stahlman ( erik@vt.edu )
+ * Daris A Nevil ( dnevil@snmc.com )
+ *
+ *
+ * Hardware multicast code from Peter Cammaert ( pc@denkart.be )
+ *
+ * Sources:
+ * o SMSC LAN91C96 databook (www.smsc.com)
+ * o smc91111.c (u-boot driver)
+ * o smc9194.c (linux kernel driver)
+ * o lan91c96.c (Intel Diagnostic Manager driver)
+ *
+ * History:
+ * 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version)
+ * for lan91c96
+ *---------------------------------------------------------------------------
+ */
+
+#include <common.h>
+#include <command.h>
+#include "lan91c96.h"
+#include <net.h>
+
+#ifdef CONFIG_DRIVER_LAN91C96
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+
+/*------------------------------------------------------------------------
+ *
+ * Configuration options, for the experienced user to change.
+ *
+ -------------------------------------------------------------------------*/
+
+/* Use power-down feature of the chip */
+#define POWER_DOWN 0
+
+/*
+ * Wait time for memory to be free. This probably shouldn't be
+ * tuned that much, as waiting for this means nothing else happens
+ * in the system
+*/
+#define MEMORY_WAIT_TIME 16
+
+#define SMC_DEBUG 0
+
+#if (SMC_DEBUG > 2 )
+#define PRINTK3(args...) printf(args)
+#else
+#define PRINTK3(args...)
+#endif
+
+#if SMC_DEBUG > 1
+#define PRINTK2(args...) printf(args)
+#else
+#define PRINTK2(args...)
+#endif
+
+#ifdef SMC_DEBUG
+#define PRINTK(args...) printf(args)
+#else
+#define PRINTK(args...)
+#endif
+
+
+/*------------------------------------------------------------------------
+ *
+ * The internal workings of the driver. If you are changing anything
+ * here with the SMC stuff, you should have the datasheet and know
+ * what you are doing.
+ *
+ *------------------------------------------------------------------------
+ */
+#define CARDNAME "LAN91C96"
+
+#define SMC_BASE_ADDRESS CONFIG_LAN91C96_BASE
+
+#define SMC_DEV_NAME "LAN91C96"
+#define SMC_ALLOC_MAX_TRY 5
+#define SMC_TX_TIMEOUT 30
+
+#define ETH_ZLEN 60
+
+#ifdef CONFIG_LAN91C96_USE_32_BIT
+#define USE_32_BIT 1
+#else
+#undef USE_32_BIT
+#endif
+
+/*-----------------------------------------------------------------
+ *
+ * The driver can be entered at any of the following entry points.
+ *
+ *-----------------------------------------------------------------
+ */
+
+extern int eth_init (bd_t * bd);
+extern void eth_halt (void);
+extern int eth_rx (void);
+extern int eth_send (volatile void *packet, int length);
+static int smc_hw_init (void);
+
+/*
+ * This is called by register_netdev(). It is responsible for
+ * checking the portlist for the SMC9000 series chipset. If it finds
+ * one, then it will initialize the device, find the hardware information,
+ * and sets up the appropriate device parameters.
+ * NOTE: Interrupts are *OFF* when this procedure is called.
+ *
+ * NB:This shouldn't be static since it is referred to externally.
+ */
+int smc_init (void);
+
+/*
+ * This is called by unregister_netdev(). It is responsible for
+ * cleaning up before the driver is finally unregistered and discarded.
+ */
+void smc_destructor (void);
+
+/*
+ * The kernel calls this function when someone wants to use the device,
+ * typically 'ifconfig ethX up'.
+ */
+static int smc_open (void);
+
+
+/*
+ * This is called by the kernel in response to 'ifconfig ethX down'. It
+ * is responsible for cleaning up everything that the open routine
+ * does, and maybe putting the card into a powerdown state.
+ */
+static int smc_close (void);
+
+/*
+ * This is a separate procedure to handle the receipt of a packet, to
+ * leave the interrupt code looking slightly cleaner
+ */
+static int smc_rcv (void);
+
+
+
+/* ------------------------------------------------------------
+ * Internal routines
+ * ------------------------------------------------------------
+ */
+
+static char smc_mac_addr[] = { 0xc0, 0x00, 0x00, 0x1b, 0x62, 0x9c };
+
+/*
+ * This function must be called before smc_open() if you want to override
+ * the default mac address.
+ */
+
+void smc_set_mac_addr (const char *addr)
+{
+ int i;
+
+ for (i = 0; i < sizeof (smc_mac_addr); i++) {
+ smc_mac_addr[i] = addr[i];
+ }
+}
+
+/*
+ * smc_get_macaddr is no longer used. If you want to override the default
+ * mac address, call smc_get_mac_addr as a part of the board initialisation.
+ */
+
+#if 0
+void smc_get_macaddr (byte * addr)
+{
+ /* MAC ADDRESS AT FLASHBLOCK 1 / OFFSET 0x10 */
+ unsigned char *dnp1110_mac = (unsigned char *) (0xE8000000 + 0x20010);
+ int i;
+
+
+ for (i = 0; i < 6; i++) {
+ addr[0] = *(dnp1110_mac + 0);
+ addr[1] = *(dnp1110_mac + 1);
+ addr[2] = *(dnp1110_mac + 2);
+ addr[3] = *(dnp1110_mac + 3);
+ addr[4] = *(dnp1110_mac + 4);
+ addr[5] = *(dnp1110_mac + 5);
+ }
+}
+#endif /* 0 */
+
+/***********************************************
+ * Show available memory *
+ ***********************************************/
+void dump_memory_info (void)
+{
+ word mem_info;
+ word old_bank;
+
+ old_bank = SMC_inw (LAN91C96_BANK_SELECT) & 0xF;
+
+ SMC_SELECT_BANK (0);
+ mem_info = SMC_inw (LAN91C96_MIR);
+ PRINTK2 ("Memory: %4d available\n", (mem_info >> 8) * 2048);
+
+ SMC_SELECT_BANK (old_bank);
+}
+
+/*
+ * A rather simple routine to print out a packet for debugging purposes.
+ */
+#if SMC_DEBUG > 2
+static void print_packet (byte *, int);
+#endif
+
+/* #define tx_done(dev) 1 */
+
+
+
+/* this does a soft reset on the device */
+static void smc_reset (void);
+
+/* Enable Interrupts, Receive, and Transmit */
+static void smc_enable (void);
+
+/* this puts the device in an inactive state */
+static void smc_shutdown (void);
+
+
+static int poll4int (byte mask, int timeout)
+{
+ int tmo = get_timer (0) + timeout * CFG_HZ;
+ int is_timeout = 0;
+ word old_bank = SMC_inw (LAN91C96_BANK_SELECT);
+
+ PRINTK2 ("Polling...\n");
+ SMC_SELECT_BANK (2);
+ while ((SMC_inw (LAN91C96_INT_STATS) & mask) == 0) {
+ if (get_timer (0) >= tmo) {
+ is_timeout = 1;
+ break;
+ }
+ }
+
+ /* restore old bank selection */
+ SMC_SELECT_BANK (old_bank);
+
+ if (is_timeout)
+ return 1;
+ else
+ return 0;
+}
+
+/*
+ * Function: smc_reset( void )
+ * Purpose:
+ * This sets the SMC91111 chip to its normal state, hopefully from whatever
+ * mess that any other DOS driver has put it in.
+ *
+ * Maybe I should reset more registers to defaults in here? SOFTRST should
+ * do that for me.
+ *
+ * Method:
+ * 1. send a SOFT RESET
+ * 2. wait for it to finish
+ * 3. enable autorelease mode
+ * 4. reset the memory management unit
+ * 5. clear all interrupts
+ *
+*/
+static void smc_reset (void)
+{
+ PRINTK2 ("%s:smc_reset\n", SMC_DEV_NAME);
+
+ /* This resets the registers mostly to defaults, but doesn't
+ affect EEPROM. That seems unnecessary */
+ SMC_SELECT_BANK (0);
+ SMC_outw (LAN91C96_RCR_SOFT_RST, LAN91C96_RCR);
+
+ udelay (10);
+
+ /* Disable transmit and receive functionality */
+ SMC_outw (0, LAN91C96_RCR);
+ SMC_outw (0, LAN91C96_TCR);
+
+ /* set the control register */
+ SMC_SELECT_BANK (1);
+ SMC_outw (SMC_inw (LAN91C96_CONTROL) | LAN91C96_CTR_BIT_8,
+ LAN91C96_CONTROL);
+
+ /* Disable all interrupts */
+ SMC_outb (0, LAN91C96_INT_MASK);
+}
+
+/*
+ * Function: smc_enable
+ * Purpose: let the chip talk to the outside work
+ * Method:
+ * 1. Initialize the Memory Configuration Register
+ * 2. Enable the transmitter
+ * 3. Enable the receiver
+*/
+static void smc_enable ()
+{
+ PRINTK2 ("%s:smc_enable\n", SMC_DEV_NAME);
+ SMC_SELECT_BANK (0);
+
+ /* Initialize the Memory Configuration Register. See page
+ 49 of the LAN91C96 data sheet for details. */
+ SMC_outw (LAN91C96_MCR_TRANSMIT_PAGES, LAN91C96_MCR);
+
+ /* Initialize the Transmit Control Register */
+ SMC_outw (LAN91C96_TCR_TXENA, LAN91C96_TCR);
+ /* Initialize the Receive Control Register
+ * FIXME:
+ * The promiscuous bit set because I could not receive ARP reply
+ * packets from the server when I send a ARP request. It only works
+ * when I set the promiscuous bit
+ */
+ SMC_outw (LAN91C96_RCR_RXEN | LAN91C96_RCR_PRMS, LAN91C96_RCR);
+}
+
+/*
+ * Function: smc_shutdown
+ * Purpose: closes down the SMC91xxx chip.
+ * Method:
+ * 1. zero the interrupt mask
+ * 2. clear the enable receive flag
+ * 3. clear the enable xmit flags
+ *
+ * TODO:
+ * (1) maybe utilize power down mode.
+ * Why not yet? Because while the chip will go into power down mode,
+ * the manual says that it will wake up in response to any I/O requests
+ * in the register space. Empirical results do not show this working.
+ */
+static void smc_shutdown ()
+{
+ PRINTK2 (CARDNAME ":smc_shutdown\n");
+
+ /* no more interrupts for me */
+ SMC_SELECT_BANK (2);
+ SMC_outb (0, LAN91C96_INT_MASK);
+
+ /* and tell the card to stay away from that nasty outside world */
+ SMC_SELECT_BANK (0);
+ SMC_outb (0, LAN91C96_RCR);
+ SMC_outb (0, LAN91C96_TCR);
+}
+
+
+/*
+ * Function: smc_hardware_send_packet(struct net_device * )
+ * Purpose:
+ * This sends the actual packet to the SMC9xxx chip.
+ *
+ * Algorithm:
+ * First, see if a saved_skb is available.
+ * ( this should NOT be called if there is no 'saved_skb'
+ * Now, find the packet number that the chip allocated
+ * Point the data pointers at it in memory
+ * Set the length word in the chip's memory
+ * Dump the packet to chip memory
+ * Check if a last byte is needed ( odd length packet )
+ * if so, set the control flag right
+ * Tell the card to send it
+ * Enable the transmit interrupt, so I know if it failed
+ * Free the kernel data if I actually sent it.
+ */
+static int smc_send_packet (volatile void *packet, int packet_length)
+{
+ byte packet_no;
+ unsigned long ioaddr;
+ byte *buf;
+ int length;
+ int numPages;
+ int try = 0;
+ int time_out;
+ byte status;
+
+
+ PRINTK3 ("%s:smc_hardware_send_packet\n", SMC_DEV_NAME);
+
+ length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;
+
+ /* allocate memory
+ ** The MMU wants the number of pages to be the number of 256 bytes
+ ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
+ **
+ ** The 91C111 ignores the size bits, but the code is left intact
+ ** for backwards and future compatibility.
+ **
+ ** Pkt size for allocating is data length +6 (for additional status
+ ** words, length and ctl!)
+ **
+ ** If odd size then last byte is included in this header.
+ */
+ numPages = ((length & 0xfffe) + 6);
+ numPages >>= 8; /* Divide by 256 */
+
+ if (numPages > 7) {
+ printf ("%s: Far too big packet error. \n", SMC_DEV_NAME);
+ return 0;
+ }
+
+ /* now, try to allocate the memory */
+
+ SMC_SELECT_BANK (2);
+ SMC_outw (LAN91C96_MMUCR_ALLOC_TX | numPages, LAN91C96_MMU);
+
+ again:
+ try++;
+ time_out = MEMORY_WAIT_TIME;
+ do {
+ status = SMC_inb (LAN91C96_INT_STATS);
+ if (status & LAN91C96_IST_ALLOC_INT) {
+
+ SMC_outb (LAN91C96_IST_ALLOC_INT, LAN91C96_INT_STATS);
+ break;
+ }
+ } while (--time_out);
+
+ if (!time_out) {
+ PRINTK2 ("%s: memory allocation, try %d failed ...\n",
+ SMC_DEV_NAME, try);
+ if (try < SMC_ALLOC_MAX_TRY)
+ goto again;
+ else
+ return 0;
+ }
+
+ PRINTK2 ("%s: memory allocation, try %d succeeded ...\n",
+ SMC_DEV_NAME, try);
+
+ /* I can send the packet now.. */
+
+ ioaddr = SMC_BASE_ADDRESS;
+
+ buf = (byte *) packet;
+
+ /* If I get here, I _know_ there is a packet slot waiting for me */
+ packet_no = SMC_inb (LAN91C96_ARR);
+ if (packet_no & LAN91C96_ARR_FAILED) {
+ /* or isn't there? BAD CHIP! */
+ printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME);
+ return 0;
+ }
+
+ /* we have a packet address, so tell the card to use it */
+ SMC_outb (packet_no, LAN91C96_PNR);
+
+ /* point to the beginning of the packet */
+ SMC_outw (LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER);
+
+ PRINTK3 ("%s: Trying to xmit packet of length %x\n",
+ SMC_DEV_NAME, length);
+
+#if SMC_DEBUG > 2
+ printf ("Transmitting Packet\n");
+ print_packet (buf, length);
+#endif
+
+ /* send the packet length ( +6 for status, length and ctl byte )
+ and the status word ( set to zeros ) */
+#ifdef USE_32_BIT
+ SMC_outl ((length + 6) << 16, LAN91C96_DATA_HIGH);
+#else
+ SMC_outw (0, LAN91C96_DATA_HIGH);
+ /* send the packet length ( +6 for status words, length, and ctl */
+ SMC_outw ((length + 6), LAN91C96_DATA_HIGH);
+#endif /* USE_32_BIT */
+
+ /* send the actual data
+ * I _think_ it's faster to send the longs first, and then
+ * mop up by sending the last word. It depends heavily
+ * on alignment, at least on the 486. Maybe it would be
+ * a good idea to check which is optimal? But that could take
+ * almost as much time as is saved?
+ */
+#ifdef USE_32_BIT
+ SMC_outsl (LAN91C96_DATA_HIGH, buf, length >> 2);
+ if (length & 0x2)
+ SMC_outw (*((word *) (buf + (length & 0xFFFFFFFC))),
+ LAN91C96_DATA_HIGH);
+#else
+ SMC_outsw (LAN91C96_DATA_HIGH, buf, (length) >> 1);
+#endif /* USE_32_BIT */
+
+ /* Send the last byte, if there is one. */
+ if ((length & 1) == 0) {
+ SMC_outw (0, LAN91C96_DATA_HIGH);
+ } else {
+ SMC_outw (buf[length - 1] | 0x2000, LAN91C96_DATA_HIGH);
+ }
+
+ /* and let the chipset deal with it */
+ SMC_outw (LAN91C96_MMUCR_ENQUEUE, LAN91C96_MMU);
+
+ /* poll for TX INT */
+ if (poll4int (LAN91C96_MSK_TX_INT, SMC_TX_TIMEOUT)) {
+ /* sending failed */
+ PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME);
+
+ /* release packet */
+ SMC_outw (LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU);
+
+ /* wait for MMU getting ready (low) */
+ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) {
+ udelay (10);
+ }
+
+ PRINTK2 ("MMU ready\n");
+
+
+ return 0;
+ } else {
+ /* ack. int */
+ SMC_outw (LAN91C96_IST_TX_INT, LAN91C96_INT_STATS);
+
+ PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME, length);
+
+ /* release packet */
+ SMC_outw (LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU);
+
+ /* wait for MMU getting ready (low) */
+ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) {
+ udelay (10);
+ }
+
+ PRINTK2 ("MMU ready\n");
+ }
+
+ return length;
+}
+
+/*-------------------------------------------------------------------------
+ * smc_destructor( struct net_device * dev )
+ * Input parameters:
+ * dev, pointer to the device structure
+ *
+ * Output:
+ * None.
+ *--------------------------------------------------------------------------
+ */
+void smc_destructor ()
+{
+ PRINTK2 (CARDNAME ":smc_destructor\n");
+}
+
+
+/*
+ * Open and Initialize the board
+ *
+ * Set up everything, reset the card, etc ..
+ *
+ */
+static int smc_open ()
+{
+ int i; /* used to set hw ethernet address */
+
+ PRINTK2 ("%s:smc_open\n", SMC_DEV_NAME);
+
+ /* reset the hardware */
+
+ smc_reset ();
+ smc_enable ();
+
+ SMC_SELECT_BANK (1);
+
+ for (i = 0; i < 6; i += 2) {
+ word address;
+
+ address = smc_mac_addr[i + 1] << 8;
+ address |= smc_mac_addr[i];
+ SMC_outw (address, LAN91C96_IA0 + i);
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------
+ *
+ * smc_rcv - receive a packet from the card
+ *
+ * There is ( at least ) a packet waiting to be read from
+ * chip-memory.
+ *
+ * o Read the status
+ * o If an error, record it
+ * o otherwise, read in the packet
+ *-------------------------------------------------------------
+ */
+static int smc_rcv ()
+{
+ int packet_number;
+ word status;
+ word packet_length;
+ int is_error = 0;
+
+#ifdef USE_32_BIT
+ dword stat_len;
+#endif
+
+
+ SMC_SELECT_BANK (2);
+ packet_number = SMC_inw (LAN91C96_FIFO);
+
+ if (packet_number & LAN91C96_FIFO_RXEMPTY) {
+ return 0;
+ }
+
+ PRINTK3 ("%s:smc_rcv\n", SMC_DEV_NAME);
+ /* start reading from the start of the packet */
+ SMC_outw (LAN91C96_PTR_READ | LAN91C96_PTR_RCV |
+ LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER);
+
+ /* First two words are status and packet_length */
+#ifdef USE_32_BIT
+ stat_len = SMC_inl (LAN91C96_DATA_HIGH);
+ status = stat_len & 0xffff;
+ packet_length = stat_len >> 16;
+#else
+ status = SMC_inw (LAN91C96_DATA_HIGH);
+ packet_length = SMC_inw (LAN91C96_DATA_HIGH);
+#endif
+
+ packet_length &= 0x07ff; /* mask off top bits */
+
+ PRINTK2 ("RCV: STATUS %4x LENGTH %4x\n", status, packet_length);
+
+ if (!(status & FRAME_FILTER)) {
+ /* Adjust for having already read the first two words */
+ packet_length -= 4; /*4; */
+
+
+
+ /* set odd length for bug in LAN91C111, */
+ /* which never sets RS_ODDFRAME */
+ /* TODO ? */
+
+
+#ifdef USE_32_BIT
+ PRINTK3 (" Reading %d dwords (and %d bytes) \n",
+ packet_length >> 2, packet_length & 3);
+ /* QUESTION: Like in the TX routine, do I want
+ to send the DWORDs or the bytes first, or some
+ mixture. A mixture might improve already slow PIO
+ performance */
+ SMC_insl (LAN91C96_DATA_HIGH, NetRxPackets[0], packet_length >> 2);
+ /* read the left over bytes */
+ if (packet_length & 3) {
+ int i;
+
+ byte *tail = (byte *) (NetRxPackets[0] + (packet_length & ~3));
+ dword leftover = SMC_inl (LAN91C96_DATA_HIGH);
+
+ for (i = 0; i < (packet_length & 3); i++)
+ *tail++ = (byte) (leftover >> (8 * i)) & 0xff;
+ }
+#else
+ PRINTK3 (" Reading %d words and %d byte(s) \n",
+ (packet_length >> 1), packet_length & 1);
+ SMC_insw (LAN91C96_DATA_HIGH, NetRxPackets[0], packet_length >> 1);
+
+#endif /* USE_32_BIT */
+
+#if SMC_DEBUG > 2
+ printf ("Receiving Packet\n");
+ print_packet (NetRxPackets[0], packet_length);
+#endif
+ } else {
+ /* error ... */
+ /* TODO ? */
+ is_error = 1;
+ }
+
+ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
+ udelay (1); /* Wait until not busy */
+
+ /* error or good, tell the card to get rid of this packet */
+ SMC_outw (LAN91C96_MMUCR_RELEASE_RX, LAN91C96_MMU);
+
+ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
+ udelay (1); /* Wait until not busy */
+
+ if (!is_error) {
+ /* Pass the packet up to the protocol layers. */
+ NetReceive (NetRxPackets[0], packet_length);
+ return packet_length;
+ } else {
+ return 0;
+ }
+
+}
+
+/*----------------------------------------------------
+ * smc_close
+ *
+ * this makes the board clean up everything that it can
+ * and not talk to the outside world. Caused by
+ * an 'ifconfig ethX down'
+ *
+ -----------------------------------------------------*/
+static int smc_close ()
+{
+ PRINTK2 ("%s:smc_close\n", SMC_DEV_NAME);
+
+ /* clear everything */
+ smc_shutdown ();
+
+ return 0;
+}
+
+#if SMC_DEBUG > 2
+static void print_packet (byte * buf, int length)
+{
+#if 0
+ int i;
+ int remainder;
+ int lines;
+
+ printf ("Packet of length %d \n", length);
+
+ lines = length / 16;
+ remainder = length % 16;
+
+ for (i = 0; i < lines; i++) {
+ int cur;
+
+ for (cur = 0; cur < 8; cur++) {
+ byte a, b;
+
+ a = *(buf++);
+ b = *(buf++);
+ printf ("%02x%02x ", a, b);
+ }
+ printf ("\n");
+ }
+ for (i = 0; i < remainder / 2; i++) {
+ byte a, b;
+
+ a = *(buf++);
+ b = *(buf++);
+ printf ("%02x%02x ", a, b);
+ }
+ printf ("\n");
+#endif /* 0 */
+}
+#endif /* SMC_DEBUG > 2 */
+
+int eth_init (bd_t * bd)
+{
+ smc_open ();
+ return 0;
+}
+
+void eth_halt ()
+{
+ smc_close ();
+}
+
+int eth_rx ()
+{
+ return smc_rcv ();
+}
+
+int eth_send (volatile void *packet, int length)
+{
+ return smc_send_packet (packet, length);
+}
+
+int eth_hw_init ()
+{
+ return smc_hw_init ();
+}
+
+/*-------------------------------------------------------------------------
+ * smc_hw_init()
+ *
+ * Function:
+ * Reset and enable the device, check if the I/O space location
+ * is correct
+ *
+ * Input parameters:
+ * None
+ *
+ * Output:
+ * 0 --> success
+ * 1 --> error
+ *--------------------------------------------------------------------------
+ */
+static int smc_hw_init ()
+{
+ unsigned short status_test;
+
+ /* The attribute register of the LAN91C96 is located at address
+ 0x0e000000 on the lubbock platform */
+ volatile unsigned *attaddr = (unsigned *) (0x0e000000);
+
+ /* first reset, then enable the device. Sequence is critical */
+ attaddr[LAN91C96_ECOR] |= LAN91C96_ECOR_SRESET;
+ udelay (100);
+ attaddr[LAN91C96_ECOR] &= ~LAN91C96_ECOR_SRESET;
+ attaddr[LAN91C96_ECOR] |= LAN91C96_ECOR_ENABLE;
+
+ /* force 16-bit mode */
+ attaddr[LAN91C96_ECSR] &= ~LAN91C96_ECSR_IOIS8;
+ udelay (100);
+
+ /* check if the I/O address is correct, the upper byte of the
+ bank select register should read 0x33 */
+
+ status_test = SMC_inw (LAN91C96_BANK_SELECT);
+ if ((status_test & 0xFF00) != 0x3300) {
+ printf ("Failed to initialize ethernetchip\n");
+ return 1;
+ }
+ return 0;
+}
+
+#endif /* COMMANDS & CFG_NET */
+
+#endif /* CONFIG_DRIVER_LAN91C96 */