* Patches by Xianghua Xiao, 15 Oct 2003:
- Added Motorola CPU 8540/8560 support (cpu/85xx)
- Added Motorola MPC8540ADS board support (board/mpc8540ads)
- Added Motorola MPC8560ADS board support (board/mpc8560ads)
* Minor code cleanup
diff --git a/drivers/sk98lin/h/lm80.h b/drivers/sk98lin/h/lm80.h
index 71cf191..981a4ca 100644
--- a/drivers/sk98lin/h/lm80.h
+++ b/drivers/sk98lin/h/lm80.h
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Name: lm80.h
+ * Name: lm80.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.4 $
* Date: $Date: 2002/04/25 11:04:10 $
@@ -28,16 +28,16 @@
* $Log: lm80.h,v $
* Revision 1.4 2002/04/25 11:04:10 rschmidt
* Editorial changes
- *
+ *
* Revision 1.3 1999/11/22 13:41:19 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.2 1999/03/12 13:26:51 malthoff
* remove __STDC__.
- *
+ *
* Revision 1.1 1998/06/19 09:28:31 malthoff
* created.
- *
+ *
*
******************************************************************************/
diff --git a/drivers/sk98lin/h/skaddr.h b/drivers/sk98lin/h/skaddr.h
index 7f85ea7..711f873 100644
--- a/drivers/sk98lin/h/skaddr.h
+++ b/drivers/sk98lin/h/skaddr.h
@@ -28,90 +28,90 @@
* $Log: skaddr.h,v $
* Revision 1.26 2002/11/15 07:24:42 tschilli
* SK_ADDR_EQUAL macro fixed.
- *
+ *
* Revision 1.25 2002/06/10 13:55:18 tschilli
* Changes for handling YUKON.
* All changes are internally and not visible to the programmer
* using this module.
- *
+ *
* Revision 1.24 2001/01/22 13:41:34 rassmann
* Supporting two nets on dual-port adapters.
- *
+ *
* Revision 1.23 2000/08/10 11:27:50 rassmann
* Editorial changes.
* Preserving 32-bit alignment in structs for the adapter context.
- *
+ *
* Revision 1.22 2000/08/07 11:10:40 rassmann
* Editorial changes.
- *
+ *
* Revision 1.21 2000/05/04 09:39:59 rassmann
* Editorial changes.
* Corrected multicast address hashing.
- *
+ *
* Revision 1.20 1999/11/22 13:46:14 cgoos
* Changed license header to GPL.
* Allowing overwrite for SK_ADDR_EQUAL.
- *
+ *
* Revision 1.19 1999/05/28 10:56:07 rassmann
* Editorial changes.
- *
+ *
* Revision 1.18 1999/04/06 17:22:04 rassmann
* Added private "ActivePort".
- *
+ *
* Revision 1.17 1999/01/14 16:18:19 rassmann
* Corrected multicast initialization.
- *
+ *
* Revision 1.16 1999/01/04 10:30:36 rassmann
* SkAddrOverride only possible after SK_INIT_IO phase.
- *
+ *
* Revision 1.15 1998/12/29 13:13:11 rassmann
* An address override is now preserved in the SK_INIT_IO phase.
* All functions return an int now.
* Extended parameter checking.
- *
+ *
* Revision 1.14 1998/11/24 12:39:45 rassmann
* Reserved multicast entry for BPDU address.
* 13 multicast entries left for protocol.
- *
+ *
* Revision 1.13 1998/11/13 17:24:32 rassmann
* Changed return value of SkAddrOverride to int.
- *
+ *
* Revision 1.12 1998/11/13 16:56:19 rassmann
* Added macro SK_ADDR_COMPARE.
* Changed return type of SkAddrOverride to SK_BOOL.
- *
+ *
* Revision 1.11 1998/10/28 18:16:35 rassmann
* Avoiding I/Os before SK_INIT_RUN level.
* Aligning InexactFilter.
- *
+ *
* Revision 1.10 1998/10/22 11:39:10 rassmann
* Corrected signed/unsigned mismatches.
- *
+ *
* Revision 1.9 1998/10/15 15:15:49 rassmann
* Changed Flags Parameters from SK_U8 to int.
* Checked with lint.
- *
+ *
* Revision 1.8 1998/09/24 19:15:12 rassmann
* Code cleanup.
- *
+ *
* Revision 1.7 1998/09/18 20:22:13 rassmann
* Added HW access.
- *
+ *
* Revision 1.6 1998/09/04 19:40:20 rassmann
* Interface enhancements.
- *
+ *
* Revision 1.5 1998/09/04 12:40:57 rassmann
* Interface cleanup.
- *
+ *
* Revision 1.4 1998/09/04 12:14:13 rassmann
* Interface cleanup.
- *
+ *
* Revision 1.3 1998/09/02 16:56:40 rassmann
* Updated interface.
- *
+ *
* Revision 1.2 1998/08/27 14:26:09 rassmann
* Updated interface.
- *
+ *
* Revision 1.1 1998/08/21 08:31:08 rassmann
* First public version.
*
@@ -401,7 +401,7 @@
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber,
- int NewPromMode);
+ int NewPromMode);
extern int SkAddrSwap(
SK_AC *pAC,
diff --git a/drivers/sk98lin/h/skcsum.h b/drivers/sk98lin/h/skcsum.h
index b7226f1..2acae32 100644
--- a/drivers/sk98lin/h/skcsum.h
+++ b/drivers/sk98lin/h/skcsum.h
@@ -28,34 +28,34 @@
* $Log: skcsum.h,v $
* Revision 1.9 2001/02/06 11:21:39 rassmann
* Editorial changes.
- *
+ *
* Revision 1.8 2001/02/06 11:15:36 rassmann
* Supporting two nets on dual-port adapters.
- *
+ *
* Revision 1.7 2000/06/29 13:17:05 rassmann
* Corrected reception of a packet with UDP checksum == 0 (which means there
* is no UDP checksum).
- *
+ *
* Revision 1.6 2000/02/28 12:33:44 cgoos
* Changed C++ style comments to C style.
- *
+ *
* Revision 1.5 2000/02/21 12:10:05 cgoos
* Fixed license comment.
- *
+ *
* Revision 1.4 2000/02/21 11:08:37 cgoos
* Merged changes back into common source.
- *
+ *
* Revision 1.1 1999/07/26 14:47:49 mkarl
* changed from common source to windows specific source
* added return SKCS_STATUS_IP_CSUM_ERROR_UDP and
* SKCS_STATUS_IP_CSUM_ERROR_TCP to pass the NidsTester
* changes for Tx csum offload
- *
+ *
* Revision 1.2 1998/09/04 12:16:34 mhaveman
* Checked in for Stephan to allow compilation.
* -Added definition SK_CSUM_EVENT_CLEAR_PROTO_STATS to clear statistic
* -Added prototype for SkCsEvent()
- *
+ *
* Revision 1.1 1998/09/01 15:36:53 swolf
* initial revision
*
@@ -130,7 +130,7 @@
* SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok).
* SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok.
* SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok.
- * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum.
+ * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum.
*/
#ifndef SKCS_OVERWRITE_STATUS /* User overwrite? */
#define SKCS_STATUS int /* Define status type. */
diff --git a/drivers/sk98lin/h/skdebug.h b/drivers/sk98lin/h/skdebug.h
index cc14e1c..cf5b5ad 100644
--- a/drivers/sk98lin/h/skdebug.h
+++ b/drivers/sk98lin/h/skdebug.h
@@ -28,42 +28,42 @@
* Revision 1.12 2002/07/15 15:37:13 rschmidt
* Power Management support
* Editorial changes
- *
+ *
* Revision 1.11 2002/04/25 11:04:39 rschmidt
* Editorial changes
- *
+ *
* Revision 1.10 1999/11/22 13:47:40 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.9 1999/09/14 14:02:43 rwahl
* Added SK_DBGMOD_PECP.
- *
+ *
* Revision 1.8 1998/11/25 08:31:54 gklug
* fix: no C++ comments allowed in common sources
- *
+ *
* Revision 1.7 1998/11/24 16:47:24 swolf
* Driver may now define its own SK_DBG_MSG() (eg. in "h/skdrv1st.h").
- *
+ *
* Revision 1.6 1998/10/28 10:23:55 rassmann
* ADDED SK_DBGMOD_ADDR.
- *
+ *
* Revision 1.5 1998/10/22 09:43:55 gklug
* add: CSUM module
- *
+ *
* Revision 1.4 1998/10/01 07:54:44 gklug
* add: PNMI debug module
- *
+ *
* Revision 1.3 1998/09/18 08:32:34 afischer
* Macros changed according ssr-spec.:
* SK_DBG_MODCHK -> SK_DBG_CHKMOD
* SK_DBG_CATCHK -> SK_DBG_CHKCAT
- *
+ *
* Revision 1.2 1998/07/03 14:38:25 malthoff
* Add category SK_DBGCAT_FATAL.
- *
+ *
* Revision 1.1 1998/06/19 13:39:01 malthoff
* created.
- *
+ *
*
******************************************************************************/
diff --git a/drivers/sk98lin/h/skdrv1st.h b/drivers/sk98lin/h/skdrv1st.h
index 2d49941..af34d7b 100644
--- a/drivers/sk98lin/h/skdrv1st.h
+++ b/drivers/sk98lin/h/skdrv1st.h
@@ -28,50 +28,50 @@
* $Log: skdrv1st.h,v $
* Revision 1.11 2003/02/25 14:16:40 mlindner
* Fix: Copyright statement
- *
+ *
* Revision 1.10 2002/10/02 12:46:02 mlindner
* Add: Support for Yukon
- *
+ *
* Revision 1.9.2.2 2001/12/07 12:06:42 mlindner
* Fix: malloc -> slab changes
- *
+ *
* Revision 1.9.2.1 2001/03/12 16:50:59 mlindner
* chg: kernel 2.4 adaption
- *
+ *
* Revision 1.9 2001/01/22 14:16:04 mlindner
* added ProcFs functionality
* Dual Net functionality integrated
* Rlmt networks added
- *
+ *
* Revision 1.8 2000/02/21 12:19:18 cgoos
* Added default for SK_DEBUG_CHKMOD/_CHKCAT
- *
+ *
* Revision 1.7 1999/11/22 13:50:00 cgoos
* Changed license header to GPL.
* Added overwrite for several functions.
* Removed linux 2.0.x definitions.
* Removed PCI vendor ID definition (now in kernel).
- *
+ *
* Revision 1.6 1999/07/27 08:03:33 cgoos
* Changed SK_IN/OUT macros to readX/writeX instead of memory
* accesses (necessary for ALPHA).
- *
+ *
* Revision 1.5 1999/07/23 12:10:21 cgoos
* Removed SK_RLMT_SLOW_LOOKAHEAD define.
- *
+ *
* Revision 1.4 1999/07/14 12:31:13 cgoos
* Added SK_RLMT_SLOW_LOOKAHEAD define.
- *
+ *
* Revision 1.3 1999/04/07 10:12:54 cgoos
* Added check for KERNEL and OPTIMIZATION defines.
- *
+ *
* Revision 1.2 1999/03/01 08:51:47 cgoos
* Fixed pcibios_read/write definitions.
- *
+ *
* Revision 1.1 1999/02/16 07:40:49 cgoos
* First version.
- *
- *
+ *
+ *
*
******************************************************************************/
@@ -179,7 +179,7 @@
#define SK_MEM_MAPPED_IO
-// #define SK_RLMT_SLOW_LOOKAHEAD
+/* #define SK_RLMT_SLOW_LOOKAHEAD */
#define SK_MAX_MACS 2
#define SK_MAX_NETS 2
@@ -199,9 +199,9 @@
#define SK_STRCMP(pStr1,pStr2) strcmp((char*)(pStr1),(char*)(pStr2))
/* macros to access the adapter */
-#define SK_OUT8(b,a,v) writeb((v), ((b)+(a)))
-#define SK_OUT16(b,a,v) writew((v), ((b)+(a)))
-#define SK_OUT32(b,a,v) writel((v), ((b)+(a)))
+#define SK_OUT8(b,a,v) writeb((v), ((b)+(a)))
+#define SK_OUT16(b,a,v) writew((v), ((b)+(a)))
+#define SK_OUT32(b,a,v) writel((v), ((b)+(a)))
#define SK_IN8(b,a,pv) (*(pv) = readb((b)+(a)))
#define SK_IN16(b,a,pv) (*(pv) = readw((b)+(a)))
#define SK_IN32(b,a,pv) (*(pv) = readl((b)+(a)))
@@ -262,4 +262,3 @@
extern void SkErrorLog(SK_AC*, int, int, char*);
#endif
-
diff --git a/drivers/sk98lin/h/skdrv2nd.h b/drivers/sk98lin/h/skdrv2nd.h
index 6ac884b..a311827 100644
--- a/drivers/sk98lin/h/skdrv2nd.h
+++ b/drivers/sk98lin/h/skdrv2nd.h
@@ -28,19 +28,19 @@
* $Log: skdrv2nd.h,v $
* Revision 1.15 2003/02/25 14:16:40 mlindner
* Fix: Copyright statement
- *
+ *
* Revision 1.14 2003/02/25 13:26:26 mlindner
* Add: Support for various vendors
- *
+ *
* Revision 1.13 2002/10/02 12:46:02 mlindner
* Add: Support for Yukon
- *
+ *
* Revision 1.12.2.2 2001/09/05 12:14:50 mlindner
* add: New hardware revision int
- *
+ *
* Revision 1.12.2.1 2001/03/12 16:50:59 mlindner
* chg: kernel 2.4 adaption
- *
+ *
* Revision 1.12 2001/03/01 12:52:15 mlindner
* Fixed ring size
*
@@ -66,28 +66,28 @@
*
* Revision 1.7 1999/09/28 12:38:21 cgoos
* Added CheckQueue to SK_AC.
- *
+ *
* Revision 1.6 1999/07/27 08:04:05 cgoos
* Added checksumming variables to SK_AC.
- *
+ *
* Revision 1.5 1999/03/29 12:33:26 cgoos
* Rreversed to fine lock granularity.
- *
+ *
* Revision 1.4 1999/03/15 12:14:02 cgoos
* Added DriverLock to SK_AC.
* Removed other locks.
- *
+ *
* Revision 1.3 1999/03/01 08:52:27 cgoos
* Changed pAC->PciDev declaration.
- *
+ *
* Revision 1.2 1999/02/18 10:57:14 cgoos
* Removed SkDrvTimeStamp prototype.
* Fixed SkGeOsGetTime prototype.
- *
+ *
* Revision 1.1 1999/02/16 07:41:01 cgoos
* First version.
- *
- *
+ *
+ *
*
******************************************************************************/
@@ -126,40 +126,40 @@
result = SK_FALSE; /* default */ \
/* 3Com (0x10b7) */ \
if (pdev->vendor == 0x10b7) { \
- /* Gigabit Ethernet Adapter (0x1700) */ \
- if ((pdev->device == 0x1700)) { \
- result = SK_TRUE; \
- } \
+ /* Gigabit Ethernet Adapter (0x1700) */ \
+ if ((pdev->device == 0x1700)) { \
+ result = SK_TRUE; \
+ } \
/* SysKonnect (0x1148) */ \
} else if (pdev->vendor == 0x1148) { \
- /* SK-98xx Gigabit Ethernet Server Adapter (0x4300) */ \
- /* SK-98xx V2 Gigabit Ethernet Adapter (0x4320) */ \
- if ((pdev->device == 0x4300) || \
- (pdev->device == 0x4320)) { \
- result = SK_TRUE; \
- } \
+ /* SK-98xx Gigabit Ethernet Server Adapter (0x4300) */ \
+ /* SK-98xx V2 Gigabit Ethernet Adapter (0x4320) */ \
+ if ((pdev->device == 0x4300) || \
+ (pdev->device == 0x4320)) { \
+ result = SK_TRUE; \
+ } \
/* D-Link (0x1186) */ \
} else if (pdev->vendor == 0x1186) { \
- /* Gigabit Ethernet Adapter (0x4c00) */ \
- if ((pdev->device == 0x4c00)) { \
- result = SK_TRUE; \
- } \
+ /* Gigabit Ethernet Adapter (0x4c00) */ \
+ if ((pdev->device == 0x4c00)) { \
+ result = SK_TRUE; \
+ } \
/* CNet (0x1371) */ \
} else if (pdev->vendor == 0x1371) { \
- /* GigaCard Network Adapter (0x434e) */ \
- if ((pdev->device == 0x434e)) { \
- result = SK_TRUE; \
- } \
+ /* GigaCard Network Adapter (0x434e) */ \
+ if ((pdev->device == 0x434e)) { \
+ result = SK_TRUE; \
+ } \
/* Linksys (0x1737) */ \
} else if (pdev->vendor == 0x1737) { \
- /* Gigabit Network Adapter (0x1032) */ \
- /* Gigabit Network Adapter (0x1064) */ \
- if ((pdev->device == 0x1032) || \
- (pdev->device == 0x1064)) { \
- result = SK_TRUE; \
- } \
+ /* Gigabit Network Adapter (0x1032) */ \
+ /* Gigabit Network Adapter (0x1064) */ \
+ if ((pdev->device == 0x1032) || \
+ (pdev->device == 0x1064)) { \
+ result = SK_TRUE; \
+ } \
} else { \
- result = SK_FALSE; \
+ result = SK_FALSE; \
} \
}
@@ -188,7 +188,6 @@
};
-
/*
* ioctl definitions
*/
@@ -309,7 +308,6 @@
#define TX_CTRL_LEN_MASK UINT32_C(0x0000FFFF)
-
/* The offsets of registers in the TX and RX queue control io area ***********/
#define RX_Q_BUF_CTRL_CNT 0x00
@@ -441,7 +439,7 @@
int Mtu;
int Up;
SK_AC *pAC;
-};
+};
typedef struct s_TxPort TX_PORT;
@@ -504,7 +502,7 @@
SK_PNMI_STRUCT_DATA PnmiStruct; /* structure to get all Pnmi-Data */
int RlmtMode; /* link check mode to set */
int RlmtNets; /* Number of nets */
-
+
SK_IOC IoBase; /* register set of adapter */
int BoardLevel; /* level of active hw init (0-2) */
char DeviceStr[80]; /* adapter string from vpd */
@@ -520,7 +518,7 @@
struct SK_NET_DEVICE *Next; /* link all devices (for clearing) */
int RxBufSize; /* length of receive buffers */
#if 0
- struct net_device_stats stats; /* linux 'netstat -i' statistics */
+ struct net_device_stats stats; /* linux 'netstat -i' statistics */
#endif
int Index; /* internal board index number */
@@ -560,6 +558,4 @@
};
-
#endif /* __INC_SKDRV2ND_H */
-
diff --git a/drivers/sk98lin/h/skerror.h b/drivers/sk98lin/h/skerror.h
index 573c84f..a454d9d 100644
--- a/drivers/sk98lin/h/skerror.h
+++ b/drivers/sk98lin/h/skerror.h
@@ -27,23 +27,23 @@
* $Log: skerror.h,v $
* Revision 1.5 2002/04/25 11:05:10 rschmidt
* Editorial changes
- *
+ *
* Revision 1.4 1999/11/22 13:51:59 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.3 1999/09/14 14:04:42 rwahl
* Added error base SK_ERRBASE_PECP.
* Changed error base for driver.
- *
+ *
* Revision 1.2 1998/08/11 11:15:41 gklug
* chg: comments
- *
+ *
* Revision 1.1 1998/08/11 11:09:38 gklug
* add: error bases
* add: error Classes
* first version
- *
- *
+ *
+ *
*
******************************************************************************/
diff --git a/drivers/sk98lin/h/skgedrv.h b/drivers/sk98lin/h/skgedrv.h
index a6bac08..72ba9ce 100644
--- a/drivers/sk98lin/h/skgedrv.h
+++ b/drivers/sk98lin/h/skgedrv.h
@@ -29,22 +29,22 @@
* Revision 1.6 2002/07/15 15:38:01 rschmidt
* Power Management support
* Editorial changes
- *
+ *
* Revision 1.5 2002/04/25 11:05:47 rschmidt
* Editorial changes
- *
+ *
* Revision 1.4 1999/11/22 13:52:46 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.3 1998/12/01 13:31:39 cgoos
* SWITCH INTERN Event added.
- *
+ *
* Revision 1.2 1998/11/25 08:28:38 gklug
* rmv: PORT SWITCH Event
- *
+ *
* Revision 1.1 1998/09/29 06:14:07 gklug
* add: driver events (initial version)
- *
+ *
*
******************************************************************************/
diff --git a/drivers/sk98lin/h/skgehw.h b/drivers/sk98lin/h/skgehw.h
index 4d2499f..2c98427 100644
--- a/drivers/sk98lin/h/skgehw.h
+++ b/drivers/sk98lin/h/skgehw.h
@@ -1781,7 +1781,7 @@
WOL_CTL_DIS_LINK_CHG_UNIT | \
WOL_CTL_DIS_PATTERN_UNIT | \
WOL_CTL_DIS_MAGIC_PKT_UNIT)
-
+
/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */
#define WOL_CTL_PATT_ENA(x) (BIT_0 << (x))
@@ -1825,7 +1825,7 @@
SK_U32 RxAdrHi; /* Physical Rx Buffer Address upper dword */
SK_U32 RxStat; /* Receive Frame Status Word */
SK_U32 RxTiSt; /* Receive Time Stamp (from XMAC on GENESIS) */
-#ifndef SK_USE_REV_DESC
+#ifndef SK_USE_REV_DESC
SK_U16 RxTcpSum1; /* TCP Checksum 1 */
SK_U16 RxTcpSum2; /* TCP Checksum 2 */
SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */
@@ -1906,7 +1906,7 @@
*
* Use this macro to access the Receive and Transmit Queue Registers.
*
- * para:
+ * para:
* Queue Queue to access.
* Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
* Offs Queue register offset.
@@ -1921,7 +1921,7 @@
*
* Use this macro to access the RAM Buffer Registers.
*
- * para:
+ * para:
* Queue Queue to access.
* Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
* Offs Queue register offset.
@@ -1943,7 +1943,7 @@
*
* Use this macro to access a MAC Related Registers inside the ASIC.
*
- * para:
+ * para:
* Mac MAC to access.
* Values: MAC_1, MAC_2
* Offs MAC register offset.
@@ -2200,7 +2200,7 @@
#define PHY_ADDR_BCOM (1<<8)
#define PHY_ADDR_LONE (3<<8)
#define PHY_ADDR_NAT (0<<8)
-
+
/* GPHY address (bits 15..11 of SMI control reg) */
#define PHY_ADDR_MARV 0
@@ -2210,7 +2210,7 @@
* PHY_READ() read a 16 bit value from the PHY
* PHY_WRITE() write a 16 bit value to the PHY
*
- * para:
+ * para:
* IoC I/O context needed for SK I/O macros
* pPort Pointer to port struct for PhyAddr
* Mac XMAC to access values: MAC_1 or MAC_2
diff --git a/drivers/sk98lin/h/skgehwt.h b/drivers/sk98lin/h/skgehwt.h
index bc20ac4..8aa9edd 100644
--- a/drivers/sk98lin/h/skgehwt.h
+++ b/drivers/sk98lin/h/skgehwt.h
@@ -29,22 +29,22 @@
* $Log: skgehwt.h,v $
* Revision 1.5 1999/11/22 13:54:24 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.4 1998/08/19 09:50:58 gklug
* fix: remove struct keyword from c-code (see CCC) add typedefs
- *
+ *
* Revision 1.3 1998/08/14 07:09:29 gklug
* fix: chg pAc -> pAC
- *
+ *
* Revision 1.2 1998/08/07 12:54:21 gklug
* fix: first compiled version
- *
+ *
* Revision 1.1 1998/08/07 09:32:58 gklug
* first version
- *
- *
- *
- *
+ *
+ *
+ *
+ *
*
******************************************************************************/
diff --git a/drivers/sk98lin/h/skgei2c.h b/drivers/sk98lin/h/skgei2c.h
index 4e843a1..e639f73 100644
--- a/drivers/sk98lin/h/skgei2c.h
+++ b/drivers/sk98lin/h/skgei2c.h
@@ -29,69 +29,69 @@
* Revision 1.23 2002/12/19 14:34:27 rschmidt
* Added cast in macros SK_I2C_SET_BIT() and SK_I2C_CLR_BIT()
* Editorial changes (TWSI)
- *
+ *
* Revision 1.22 2002/10/14 16:45:56 rschmidt
* Editorial changes (TWSI)
- *
+ *
* Revision 1.21 2002/08/13 08:42:24 rschmidt
* Changed define for SK_MIN_SENSORS back to 5
* Merged defines for PHY PLL 3V3 voltage (A and B)
* Editorial changes
- *
+ *
* Revision 1.20 2002/08/06 09:43:56 jschmalz
* Extensions and changes for Yukon
- *
+ *
* Revision 1.19 2002/08/02 12:00:08 rschmidt
* Added defines for YUKON sensors
* Editorial changes
- *
+ *
* Revision 1.18 2001/08/16 12:44:33 afischer
* LM80 sensor init values corrected
- *
+ *
* Revision 1.17 1999/11/22 13:55:25 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.16 1999/11/12 08:24:10 malthoff
* Change voltage warning and error limits
* (warning +-5%, error +-10%).
- *
+ *
* Revision 1.15 1999/09/14 14:14:43 malthoff
* The 1000BT Dual Link adapter has got only one Fan.
* The second Fan has been removed.
- *
+ *
* Revision 1.14 1999/05/27 13:40:50 malthoff
* Fan Divisor = 1. Assuming fan with 6500 rpm.
- *
+ *
* Revision 1.13 1999/05/20 14:56:55 malthoff
* Bug Fix: Missing brace in SK_LM80_FAN_FAKTOR.
- *
+ *
* Revision 1.12 1999/05/20 09:22:00 cgoos
* Changes for 1000Base-T (Fan sensors).
- *
+ *
* Revision 1.11 1998/10/14 05:57:22 cgoos
* Fixed compilation warnings.
- *
+ *
* Revision 1.10 1998/09/04 08:37:00 malthoff
* bugfix: correct the SK_I2C_GET_CTL() macro.
- *
+ *
* Revision 1.9 1998/08/25 06:10:03 gklug
* add: thresholds for all sensors
*
* Revision 1.8 1998/08/20 11:37:42 gklug
* chg: change Ioc to IoC
- *
+ *
* Revision 1.7 1998/08/20 08:53:11 gklug
* fix: compiler errors
* add: Threshold values
- *
+ *
* Revision 1.6 1998/08/17 11:37:09 malthoff
* Bugfix in SK_I2C_CTL macro. The parameter 'dev'
* has to be shifted 9 bits.
- *
+ *
* Revision 1.5 1998/08/17 06:52:21 malthoff
* Remove unrequired macros.
* Add macros for accessing TWSI SW register.
- *
+ *
* Revision 1.4 1998/08/13 08:30:18 gklug
* add: conversion factors for read values
* add: new state SEN_VALEXT to read extension value of temperature sensor
diff --git a/drivers/sk98lin/h/skgeinit.h b/drivers/sk98lin/h/skgeinit.h
index f9148d1..cdddef9 100644
--- a/drivers/sk98lin/h/skgeinit.h
+++ b/drivers/sk98lin/h/skgeinit.h
@@ -29,71 +29,71 @@
* Revision 1.75 2003/02/05 13:36:39 rschmidt
* Added define SK_FACT_78 for YUKON's Host Clock of 78.12 MHz
* Editorial changes
- *
+ *
* Revision 1.74 2003/01/28 09:39:16 rschmidt
* Added entry GIYukonLite in s_GeInit structure
* Editorial changes
- *
+ *
* Revision 1.73 2002/11/15 12:47:25 rschmidt
* Replaced error message SKERR_HWI_E024 for Cable Diagnostic with
* Rx queue error in SkGeStopPort().
- *
+ *
* Revision 1.72 2002/11/12 17:08:35 rschmidt
* Added entries for Cable Diagnostic to Port structure
* Added entries GIPciSlot64 and GIPciClock66 in s_GeInit structure
* Added error message for Cable Diagnostic
* Added prototypes for SkGmCableDiagStatus()
* Editorial changes
- *
+ *
* Revision 1.71 2002/10/21 11:26:10 mkarl
* Changed interface of SkGeInitAssignRamToQueues().
- *
+ *
* Revision 1.70 2002/10/14 08:21:32 rschmidt
* Changed type of GICopperType, GIVauxAvail to SK_BOOL
* Added entry PRxOverCnt to Port structure
* Added entry GIYukon32Bit in s_GeInit structure
* Editorial changes
- *
+ *
* Revision 1.69 2002/10/09 16:57:15 mkarl
* Added some constants and macros for SkGeInitAssignRamToQueues().
- *
+ *
* Revision 1.68 2002/09/12 08:58:51 rwahl
* Retrieve counters needed for XMAC errata workarounds directly because
* PNMI returns corrected counter values (e.g. #10620).
- *
+ *
* Revision 1.67 2002/08/16 14:40:30 rschmidt
* Added entries GIGenesis and GICopperType in s_GeInit structure
* Added prototypes for SkMacHashing()
* Editorial changes
- *
+ *
* Revision 1.66 2002/08/12 13:27:21 rschmidt
* Added defines for Link speed capabilities
* Added entry PLinkSpeedCap to Port structure
* Added entry GIVauxAvail in s_GeInit structure
* Added prototypes for SkMacPromiscMode()
* Editorial changes
- *
+ *
* Revision 1.65 2002/08/08 15:46:18 rschmidt
* Added define SK_PHY_ACC_TO for PHY access timeout
* Added define SK_XM_RX_HI_WM for XMAC Rx High Watermark
* Added define SK_MIN_TXQ_SIZE for Min RAM Buffer Tx Queue Size
* Added entry PhyId1 to Port structure
- *
+ *
* Revision 1.64 2002/07/23 16:02:56 rschmidt
* Added entry GIWolOffs in s_GeInit struct (HW-Bug in YUKON 1st rev.)
* Added prototypes for: SkGePhyRead(), SkGePhyWrite()
- *
+ *
* Revision 1.63 2002/07/18 08:17:38 rwahl
* Corrected definitions for SK_LSPEED_xxx & SK_LSPEED_STAT_xxx.
- *
+ *
* Revision 1.62 2002/07/17 18:21:55 rwahl
* Added SK_LSPEED_INDETERMINATED define.
- *
+ *
* Revision 1.61 2002/07/17 17:16:03 rwahl
* - MacType now member of GIni struct.
* - Struct alignment to 32bit.
* - Editorial change.
- *
+ *
* Revision 1.60 2002/07/15 18:23:39 rwahl
* Added GeMacFunc to GE Init structure.
* Added prototypes for SkXmUpdateStats(), SkGmUpdateStats(),
@@ -101,19 +101,19 @@
* SkGmResetCounter(), SkXmOverflowStatus(), SkGmOverflowStatus().
* Added defines for current link speed state.
* Added ERRMSG defintions for MacUpdateStat() & MacStatistics().
- *
+ *
* Revision 1.59 2002/07/15 15:40:22 rschmidt
* Added entry PLinkSpeedUsed to Port structure
* Editorial changes
- *
+ *
* Revision 1.58 2002/06/10 09:36:30 rschmidt
* Editorial changes.
- *
+ *
* Revision 1.57 2002/06/05 08:18:00 rschmidt
* Corrected alignment in Port Structure
* Added new prototypes for GMAC
* Editorial changes
- *
+ *
* Revision 1.56 2002/04/25 11:38:12 rschmidt
* Added defines for Link speed values
* Added defines for Loopback parameters for MAC and PHY
@@ -128,150 +128,150 @@
* SkXmPhyRead(), SkXmPhyRead(), SkGmPhyWrite(), SkGmPhyWrite();
* Removed prototypes for static functions in SkXmac2.c
* Editorial changes
- *
+ *
* Revision 1.55 2002/02/26 15:24:53 rwahl
* Fix: no link with manual configuration (#10673). The previous fix for
* #10639 was removed. So for RLMT mode = CLS the RLMT may switch to
* misconfigured port. It should not occur for the other RLMT modes.
- *
+ *
* Revision 1.54 2002/01/18 16:52:52 rwahl
* Editorial corrections.
- *
+ *
* Revision 1.53 2001/11/20 09:19:58 rwahl
* Reworked bugfix #10639 (no dependency to RLMT mode).
- *
+ *
* Revision 1.52 2001/10/26 07:52:23 afischer
* Port switching bug in `check local link` mode
- *
+ *
* Revision 1.51 2001/02/09 12:26:38 cgoos
* Inserted #ifdef DIAG for half duplex workaround timer.
- *
+ *
* Revision 1.50 2001/02/07 07:56:40 rassmann
* Corrected copyright.
- *
+ *
* Revision 1.49 2001/01/31 15:32:18 gklug
* fix: problem with autosensing an SR8800 switch
* add: counter for autoneg timeouts
- *
+ *
* Revision 1.48 2000/11/09 11:30:10 rassmann
* WA: Waiting after releasing reset until BCom chip is accessible.
- *
+ *
* Revision 1.47 2000/10/18 12:22:40 cgoos
* Added workaround for half duplex hangup.
- *
+ *
* Revision 1.46 2000/08/10 11:28:00 rassmann
* Editorial changes.
* Preserving 32-bit alignment in structs for the adapter context.
- *
+ *
* Revision 1.45 1999/11/22 13:56:19 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.44 1999/10/26 07:34:15 malthoff
* The define SK_LNK_ON has been lost in v1.41.
- *
+ *
* Revision 1.43 1999/10/06 09:30:16 cgoos
* Changed SK_XM_THR_JUMBO.
- *
+ *
* Revision 1.42 1999/09/16 12:58:26 cgoos
* Changed SK_LED_STANDY macro to be independent of HW link sync.
- *
+ *
* Revision 1.41 1999/07/30 06:56:14 malthoff
* Correct comment for SK_MS_STAT_UNSET.
- *
+ *
* Revision 1.40 1999/05/27 13:38:46 cgoos
* Added SK_BMU_TX_WM.
* Made SK_BMU_TX_WM and SK_BMU_RX_WM user-definable.
* Changed XMAC Tx treshold to max. values.
- *
+ *
* Revision 1.39 1999/05/20 14:35:26 malthoff
* Remove prototypes for SkGeLinkLED().
- *
+ *
* Revision 1.38 1999/05/19 11:59:12 cgoos
* Added SK_MS_CAP_INDETERMINATED define.
- *
+ *
* Revision 1.37 1999/05/19 07:32:33 cgoos
* Changes for 1000Base-T.
* LED-defines for HWAC_LINK_LED macro.
- *
+ *
* Revision 1.36 1999/04/08 14:00:24 gklug
* add:Port struct field PLinkResCt
- *
+ *
* Revision 1.35 1999/03/25 07:43:07 malthoff
* Add error string for SKERR_HWI_E018MSG.
- *
+ *
* Revision 1.34 1999/03/12 16:25:57 malthoff
* Remove PPollRxD and PPollTxD.
* Add SKERR_HWI_E017MSG. and SK_DPOLL_MAX.
- *
+ *
* Revision 1.33 1999/03/12 13:34:41 malthoff
* Add Autonegotiation error codes.
* Change defines for parameter Mode in SkXmSetRxCmd().
* Replace __STDC__ by SK_KR_PROTO.
- *
+ *
* Revision 1.32 1999/01/25 14:40:20 mhaveman
* Added new return states for the virtual management port if multiple
* ports are active but differently configured.
- *
+ *
* Revision 1.31 1998/12/11 15:17:02 gklug
* add: Link partnet autoneg states : Unknown Manual and Auto-negotiation
- *
+ *
* Revision 1.30 1998/12/07 12:17:04 gklug
* add: Link Partner auto-negotiation flag
- *
+ *
* Revision 1.29 1998/12/01 10:54:42 gklug
* add: variables for XMAC Errata
- *
+ *
* Revision 1.28 1998/12/01 10:14:15 gklug
* add: PIsave saves the Interrupt status word
- *
+ *
* Revision 1.27 1998/11/26 15:24:52 mhaveman
* Added link status states SK_LMODE_STAT_AUTOHALF and
* SK_LMODE_STAT_AUTOFULL which are used by PNMI.
- *
+ *
* Revision 1.26 1998/11/26 14:53:01 gklug
* add:autoNeg Timeout variable
- *
+ *
* Revision 1.25 1998/11/26 08:58:50 gklug
* add: Link Mode configuration (AUTO Sense mode)
- *
+ *
* Revision 1.24 1998/11/24 13:30:27 gklug
* add: PCheckPar to port struct
- *
+ *
* Revision 1.23 1998/11/18 13:23:26 malthoff
* Add SK_PKT_TO_MAX.
- *
+ *
* Revision 1.22 1998/11/18 13:19:54 gklug
* add: PPrevShorts and PLinkBroken to port struct for WA XMAC Errata #C1
*
* Revision 1.21 1998/10/26 08:02:57 malthoff
* Add GIRamOffs.
- *
+ *
* Revision 1.20 1998/10/19 07:28:37 malthoff
* Add prototype for SkGeInitRamIface().
- *
+ *
* Revision 1.19 1998/10/14 14:47:48 malthoff
* SK_TIMER should not be defined for Diagnostics.
* Add SKERR_HWI_E015MSG and SKERR_HWI_E016MSG.
- *
+ *
* Revision 1.18 1998/10/14 14:00:03 gklug
* add: timer to port struct for workaround of Errata #2
- *
+ *
* Revision 1.17 1998/10/14 11:23:09 malthoff
* Add prototype for SkXmAutoNegDone().
* Fix SkXmSetRxCmd() prototype statement.
*
* Revision 1.16 1998/10/14 05:42:29 gklug
* add: HWLinkUp flag to Port struct
- *
+ *
* Revision 1.15 1998/10/09 08:26:33 malthoff
* Rename SK_RB_ULPP_B to SK_RB_LLPP_B.
- *
+ *
* Revision 1.14 1998/10/09 07:11:13 malthoff
* bug fix: SK_FACT_53 is 85 not 117.
* Rework time out init values.
* Add GIPortUsage and corresponding defines.
* Add some error log messages.
- *
+ *
* Revision 1.13 1998/10/06 14:13:14 malthoff
* Add prototype for SkGeLoadLnkSyncCnt().
*
@@ -338,7 +338,7 @@
/* modifying Link LED behaviour (used with SkGeLinkLED()) */
#define SK_LNK_OFF LED_OFF
-#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
+#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
#define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON)
#define SK_LNK_PERM (LED_ON | LED_BLK_OFF | LED_SYNC_ON)
#define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF)
@@ -549,7 +549,7 @@
#define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error */
#define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error */
#define SK_BIG_PK_OK_ON (1<<6) /* Don't set Rx Error bit for big frames */
-#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */
+#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */
#define SK_SELF_RX_ON (1<<8) /* Enable Rx of own packets */
#define SK_SELF_RX_OFF (1<<9) /* Disable Rx of own packets */
diff --git a/drivers/sk98lin/h/skgepnm2.h b/drivers/sk98lin/h/skgepnm2.h
index 2a00354..5c44f47 100644
--- a/drivers/sk98lin/h/skgepnm2.h
+++ b/drivers/sk98lin/h/skgepnm2.h
@@ -28,81 +28,81 @@
* $Log: skgepnm2.h,v $
* Revision 1.34 2002/12/16 09:05:18 tschilli
* Code for VCT handling added.
- *
+ *
* Revision 1.33 2002/09/10 09:00:03 rwahl
* Adapted boolean definitions according sktypes.
- *
+ *
* Revision 1.32 2002/08/09 09:47:01 rwahl
* Added write-only flag to oid access defines.
* Editorial changes.
- *
+ *
* Revision 1.31 2002/07/17 19:23:18 rwahl
* - Replaced MAC counter definitions by enumeration.
* - Added definition SK_PNMI_MAC_TYPES.
* - Added chipset defnition for Yukon.
- *
+ *
* Revision 1.30 2001/02/06 10:03:41 mkunz
* - Pnmi V4 dual net support added. Interface functions and macros extended
* - Vpd bug fixed
* - OID_SKGE_MTU added
- *
+ *
* Revision 1.29 2001/01/22 13:41:37 rassmann
* Supporting two nets on dual-port adapters.
- *
+ *
* Revision 1.28 2000/08/03 15:12:48 rwahl
* - Additional comment for MAC statistic data structure.
- *
+ *
* Revision 1.27 2000/08/01 16:10:18 rwahl
* - Added mac statistic data structure for StatRxLongFrame counter.
- *
+ *
* Revision 1.26 2000/03/31 13:51:34 rwahl
* Added SK_UPTR cast to offset calculation for PNMI struct fields;
* missing cast caused compiler warnings by Win64 compiler.
- *
+ *
* Revision 1.25 1999/11/22 13:57:41 cgoos
* Changed license header to GPL.
* Allowing overwrite for SK_PNMI_STORE/_READ defines.
- *
+ *
* Revision 1.24 1999/04/13 15:11:11 mhaveman
* Changed copyright.
- *
+ *
* Revision 1.23 1999/01/28 15:07:12 mhaveman
* Changed default threshold for port switches per hour from 10
* to 240 which means 4 switches per minute. This fits better
* the granularity of 32 for the port switch estimate
* counter.
- *
+ *
* Revision 1.22 1999/01/05 12:52:30 mhaveman
* Removed macro SK_PNMI_MICRO_SEC.
- *
+ *
* Revision 1.21 1999/01/05 12:50:34 mhaveman
* Enlarged macro definition SK_PNMI_HUNDREDS_SEC() so that no 64-bit
* arithmetic is necessary if SK_TICKS_PER_SEC is 100.
- *
+ *
* Revision 1.20 1998/12/09 14:02:53 mhaveman
* Defined macro SK_PNMI_DEF_RLMT_CHG_THRES for default port switch
* threshold.
- *
+ *
* Revision 1.19 1998/12/03 11:28:41 mhaveman
* Removed SK_PNMI_CHECKPTR macro.
- *
+ *
* Revision 1.18 1998/12/03 11:21:00 mhaveman
* -Added pointer check macro SK_PNMI_CHECKPTR
* -Added macros SK_PNMI_VPD_ARR_SIZE and SK_PNMI_VPD_STR_SIZE for
* VPD key evaluation.
- *
+ *
* Revision 1.17 1998/11/20 13:20:33 mhaveman
* Fixed bug in SK_PNMI_SET_STAT macro. ErrorStatus was not correctly set.
- *
+ *
* Revision 1.16 1998/11/20 08:08:49 mhaveman
* Macro SK_PNMI_CHECKFLAGS has got a if clause.
- *
+ *
* Revision 1.15 1998/11/03 13:53:40 mhaveman
* Fixed alignment problem in macor SK_PNMI_SET_STAT macro.
- *
+ *
* Revision 1.14 1998/10/30 15:50:13 mhaveman
* Added macro SK_PNMI_MICRO_SEC()
- *
+ *
* Revision 1.13 1998/10/30 12:32:20 mhaveman
* Added forgotten cast in SK_PNMI_READ_U32 macro.
*
@@ -110,46 +110,46 @@
* -Changed SK_PNMI_TRAP_SENSOR_LEN because SensorDescr has now
* variable string length.
* -Defined SK_PNMI_CHECKFLAGS macro
- *
+ *
* Revision 1.11 1998/10/29 08:53:34 mhaveman
* Removed SK_PNMI_RLM_XXX table indexed because these counters need
* not been saved over XMAC resets.
- *
+ *
* Revision 1.10 1998/10/28 08:48:20 mhaveman
* -Added macros for storage according to alignment
* -Changed type of Instance to SK_U32 because of VPD
* -Removed trap structures. Not needed because of alignment problem
* -Changed type of Action form SK_U8 to int
- *
+ *
* Revision 1.9 1998/10/21 13:34:45 mhaveman
* Shit, mismatched calculation of SK_PNMI_HUNDREDS_SEC. Corrected.
- *
+ *
* Revision 1.8 1998/10/21 13:24:58 mhaveman
* Changed calculation of hundreds of seconds.
- *
+ *
* Revision 1.7 1998/10/20 07:31:41 mhaveman
* Made type changes to unsigned int where possible.
- *
+ *
* Revision 1.6 1998/09/04 17:04:05 mhaveman
* Added Sync counters to offset storage to provided settled values on
* port switch.
- *
+ *
* Revision 1.5 1998/09/04 12:45:35 mhaveman
* Removed dummies for SK_DRIVER_ macros. They should be added by driver
* writer in skdrv2nd.h.
- *
+ *
* Revision 1.4 1998/09/04 11:59:50 mhaveman
* Everything compiles now. Driver Macros for counting still missing.
- *
+ *
* Revision 1.3 1998/08/24 12:01:35 mhaveman
* Intermediate state.
- *
+ *
* Revision 1.2 1998/08/17 07:51:40 mhaveman
* Intermediate state.
- *
+ *
* Revision 1.1 1998/08/11 09:08:40 mhaveman
* Intermediate state.
- *
+ *
****************************************************************************/
#ifndef _SKGEPNM2_H_
@@ -277,7 +277,7 @@
SK_PNMI_HTX_SYNC,
SK_PNMI_HTX_SYNC_OCTET,
SK_PNMI_HTX_RESERVED,
-
+
SK_PNMI_HRX,
SK_PNMI_HRX_OCTET,
SK_PNMI_HRX_OCTETHIGH = SK_PNMI_HRX_OCTET,
@@ -315,9 +315,9 @@
SK_PNMI_HRX_1023,
SK_PNMI_HRX_MAX,
SK_PNMI_HRX_LONGFRAMES,
-
+
SK_PNMI_HRX_RESERVED,
-
+
SK_PNMI_MAX_IDX /* NOTE: Ensure SK_PNMI_CNT_NO is set to this value */
};
diff --git a/drivers/sk98lin/h/skgepnmi.h b/drivers/sk98lin/h/skgepnmi.h
index c1f847e..7532313 100644
--- a/drivers/sk98lin/h/skgepnmi.h
+++ b/drivers/sk98lin/h/skgepnmi.h
@@ -28,44 +28,44 @@
* $Log: skgepnmi.h,v $
* Revision 1.59 2002/12/16 14:03:50 tschilli
* New defines for VCT added.
- *
+ *
* Revision 1.58 2002/12/16 09:04:59 tschilli
* Code for VCT handling added.
- *
+ *
* Revision 1.57 2002/09/26 12:41:05 tschilli
* SK_PNMI_PORT BufPort entry in struct SK_PNMI added.
- *
+ *
* Revision 1.56 2002/08/16 11:10:41 rwahl
* - Replaced c++ comment.
- *
+ *
* Revision 1.55 2002/08/09 15:40:21 rwahl
* Editorial change (renamed ConfSpeedCap).
- *
+ *
* Revision 1.54 2002/08/09 11:06:07 rwahl
* Added OID_SKGE_SPEED_CAP.
- *
+ *
* Revision 1.53 2002/08/09 09:45:28 rwahl
* Added support for NDIS OID_PNP_xxx.
* Editorial changes.
- *
+ *
* Revision 1.52 2002/08/06 17:54:07 rwahl
* - Added speed cap to PNMI config struct.
- *
+ *
* Revision 1.51 2002/07/17 19:19:26 rwahl
* - Added OID_SKGE_SPEED_MODE and OID_SKGE_SPEED_STATUS.
* - Added SK_PNMI_CNT_RX_PMACC_ERR() & SK_PNMI_CNT_RX_LONGFRAMES().
* - Added speed mode & status to PNMI config struct.
* - Editorial changes.
- *
+ *
* Revision 1.50 2002/05/22 08:59:37 rwahl
* Added string definitions for error msgs.
- *
+ *
* Revision 1.49 2001/11/20 09:23:50 rwahl
* - pnmi struct: reordered and aligned to 32bit.
- *
+ *
* Revision 1.48 2001/02/23 14:34:24 mkunz
* Changed macro PHYS2INST. Added pAC to Interface
- *
+ *
* Revision 1.47 2001/02/07 08:28:23 mkunz
* - Added Oids: OID_SKGE_DIAG_ACTION
* OID_SKGE_DIAG_RESULT
@@ -73,161 +73,161 @@
* OID_SKGE_CURRENT_PACKET_FILTER
* OID_SKGE_INTERMEDIATE_SUPPORT
* - Changed value of OID_SKGE_MTU
- *
+ *
* Revision 1.46 2001/02/06 10:01:41 mkunz
* - Pnmi V4 dual net support added. Interface functions and macros extended
* - Vpd bug fixed
* - OID_SKGE_MTU added
- *
+ *
* Revision 1.45 2001/01/22 13:41:37 rassmann
* Supporting two nets on dual-port adapters.
- *
+ *
* Revision 1.44 2000/09/07 07:35:27 rwahl
* - removed NDIS counter specific data type.
* - fixed spelling for OID_SKGE_RLMT_PORT_PREFERRED.
- *
+ *
* Revision 1.43 2000/08/04 11:41:08 rwahl
* - Fixed compiler warning (port is always >= 0) for macros
* SK_PNMI_CNT_RX_LONGFRAMES & SK_PNMI_CNT_SYNC_OCTETS
- *
+ *
* Revision 1.42 2000/08/03 15:14:07 rwahl
* - Corrected error in driver macros addressing a physical port.
- *
+ *
* Revision 1.41 2000/08/01 16:22:29 rwahl
* - Changed MDB version to 3.1.
* - Added definitions for StatRxLongFrames counter.
* - Added macro to be used by driver to count long frames received.
* - Added directive to control width (default = 32bit) of NDIS statistic
* counters (SK_NDIS_64BIT_CTR).
- *
+ *
* Revision 1.40 2000/03/31 13:51:34 rwahl
* Added SK_UPTR cast to offset calculation for PNMI struct fields;
* missing cast caused compiler warnings by Win64 compiler.
*
* Revision 1.39 1999/12/06 10:09:47 rwahl
* Added new error log message.
- *
+ *
* Revision 1.38 1999/11/22 13:57:55 cgoos
* Changed license header to GPL.
*
* Revision 1.37 1999/09/14 14:25:32 rwahl
* Set MDB version for 1000Base-T (sensors, Master/Slave) changes.
- *
+ *
* Revision 1.36 1999/05/20 09:24:56 cgoos
* Changes for 1000Base-T (sensors, Master/Slave).
- *
+ *
* Revision 1.35 1999/04/13 15:10:51 mhaveman
* Replaced RLMT macros SK_RLMT_CHECK_xxx again by those of PNMI to
* grant unified interface. But PNMI macros will store the same
* value as RLMT macros.
- *
+ *
* Revision 1.34 1999/04/13 15:03:49 mhaveman
* -Changed copyright
* -Removed SK_PNMI_RLMT_MODE_CHK_xxx macros. Those of RLMT should be
* used.
- *
+ *
* Revision 1.33 1999/03/23 10:41:02 mhaveman
* Changed comments.
- *
+ *
* Revision 1.32 1999/01/25 15:01:33 mhaveman
* Added support for multiple simultaniously active ports.
- *
+ *
* Revision 1.31 1999/01/19 10:06:26 mhaveman
* Added new error log message.
- *
+ *
* Revision 1.30 1999/01/05 10:34:49 mhaveman
* Fixed little error in RlmtChangeEstimate calculation.
- *
+ *
* Revision 1.29 1999/01/05 09:59:41 mhaveman
* Redesigned port switch average calculation to avoid 64bit
* arithmetic.
- *
+ *
* Revision 1.28 1998/12/08 10:05:48 mhaveman
* Defined macro SK_PNMI_MIN_STRUCT_SIZE.
- *
+ *
* Revision 1.27 1998/12/03 14:39:35 mhaveman
* Fixed problem that LSTAT was enumerated wrong.
- *
+ *
* Revision 1.26 1998/12/03 11:19:51 mhaveman
* Changed contents of errlog message SK_PNMI_ERR016MSG
- *
+ *
* Revision 1.25 1998/12/01 10:40:04 mhaveman
* Changed size of SensorNumber, ChecksumNumber and RlmtPortNumber in
* SK_PNMI_STRUCT_DATA to be conform with OID definition.
- *
+ *
* Revision 1.24 1998/11/20 08:09:27 mhaveman
* Added macros to convert between logical, physical port indexes and
* instances.
- *
+ *
* Revision 1.23 1998/11/10 13:41:13 mhaveman
* Needed to change interface, because NT driver needs a return value
* of needed buffer space on TOO_SHORT errors. Therefore all
* SkPnmiGet/Preset/Set functions now have a pointer to the length
* parameter, where the needed space on error is returned.
- *
+ *
* Revision 1.22 1998/11/03 12:05:51 mhaveman
* Added pAC parameter to counter macors.
*
* Revision 1.21 1998/11/02 10:47:36 mhaveman
* Added syslog messages for internal errors.
- *
+ *
* Revision 1.20 1998/10/30 15:49:36 mhaveman
* -Removed unused SK_PNMI_UTILIZATION_BASE and EstOldCnt.
* -Redefined SK_PNMI_CHG_EST_BASE to hundreds of seconds.
- *
+ *
* Revision 1.19 1998/10/29 15:38:44 mhaveman
* Changed string lengths of PNMI_STRUCT_DATA structure because
* string OIDs are now encoded with leading length ocetet.
- *
+ *
* Revision 1.18 1998/10/29 08:52:27 mhaveman
* -Added byte to strings in PNMI_STRUCT_DATA structure.
* -Shortened SK_PNMI_RLMT structure to SK_MAX_MACS elements.
- *
+ *
* Revision 1.17 1998/10/28 08:49:50 mhaveman
* -Changed type of Instance back to SK_U32 because of VPD
* -Changed type from SK_U8 to char of PciBusSpeed, PciBusWidth, PMD,
* and Connector.
- *
+ *
* Revision 1.16 1998/10/22 10:42:31 mhaveman
* -Removed (SK_U32) casts for OIDs
* -excluded NDIS OIDs when they are already defined with ifndef _NDIS_
- *
+ *
* Revision 1.15 1998/10/20 13:56:28 mhaveman
* Headerfile includes now directly other header files to comile correctly.
- *
+ *
* Revision 1.14 1998/10/20 07:31:09 mhaveman
* Made type changes to unsigned int where possible.
- *
+ *
* Revision 1.13 1998/10/19 10:53:13 mhaveman
* -Casted OID definitions to SK_U32
* -Renamed RlmtMAC... to RlmtPort...
* -Changed wrong type of VpdEntriesList from SK_U32 to char *
- *
+ *
* Revision 1.12 1998/10/13 07:42:27 mhaveman
* -Added OIDs OID_SKGE_TRAP_NUMBER and OID_SKGE_ALL_DATA
* -Removed old cvs history entries
* -Renamed MacNumber to PortNumber
- *
+ *
* Revision 1.11 1998/10/07 10:55:24 mhaveman
* -Added OID_MDB_VERSION. Therefore was a renumbering of the VPD OIDs
* necessary.
* -Added OID_GEN_ Ids to support the windows driver.
- *
+ *
* Revision 1.10 1998/09/30 13:41:10 mhaveman
* Renamed some OIDs to reduce usage of 'MAC' which is replaced by 'PORT'.
- *
+ *
* Revision 1.9 1998/09/04 17:06:17 mhaveman
* -Added SyncCounter as macro.
* -Renamed OID_SKGE_.._NO_DESCR_CTS to OID_SKGE_.._NO_BUF_CTS.
* -Added macros for driver description and version strings.
- *
+ *
* Revision 1.8 1998/09/04 14:36:52 mhaveman
* Added OIDs and Structure to access value of macro counters which are
* counted by the driver.
- *
+ *
* Revision 1.7 1998/09/04 11:59:36 mhaveman
* Everything compiles now. Driver Macros for counting still missing.
- *
+ *
****************************************************************************/
#ifndef _SKGEPNMI_H_
@@ -355,7 +355,7 @@
/* #define OID_802_3_MULTICAST_LIST 0x01010103 */
/* #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 */
/* #define OID_802_3_MAC_OPTIONS 0x01010105 */
-
+
#define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101
#define OID_802_3_XMIT_ONE_COLLISION 0x01020102
#define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103
@@ -389,7 +389,7 @@
#define OID_SKGE_VPD_VALUE 0xFF010106
#define OID_SKGE_VPD_ACCESS 0xFF010107
#define OID_SKGE_VPD_ACTION 0xFF010108
-
+
#define OID_SKGE_PORT_NUMBER 0xFF010110
#define OID_SKGE_DEVICE_TYPE 0xFF010111
#define OID_SKGE_DRIVER_DESCR 0xFF010112
@@ -436,7 +436,7 @@
#define OID_SKGE_SPEED_MODE 0xFF010171
#define OID_SKGE_SPEED_STATUS 0xFF010172
-#define OID_SKGE_SENSOR_NUMBER 0xFF020100
+#define OID_SKGE_SENSOR_NUMBER 0xFF020100
#define OID_SKGE_SENSOR_INDEX 0xFF020101
#define OID_SKGE_SENSOR_DESCR 0xFF020102
#define OID_SKGE_SENSOR_TYPE 0xFF020103
diff --git a/drivers/sk98lin/h/skgesirq.h b/drivers/sk98lin/h/skgesirq.h
index 574ca22..fc001b23 100644
--- a/drivers/sk98lin/h/skgesirq.h
+++ b/drivers/sk98lin/h/skgesirq.h
@@ -28,87 +28,87 @@
* Revision 1.26 2002/10/14 09:52:36 rschmidt
* Added SKERR_SIRQ_E023 and SKERR_SIRQ_E023 for GPHY (Yukon)
* Editorial changes
- *
+ *
* Revision 1.25 2002/07/15 18:15:52 rwahl
* Editorial changes.
- *
+ *
* Revision 1.24 2002/07/15 15:39:21 rschmidt
* Corrected define for SKERR_SIRQ_E022
* Editorial changes
- *
+ *
* Revision 1.23 2002/04/25 11:09:45 rschmidt
* Removed declarations for SkXmInitPhy(), SkXmRxTxEnable()
* Editorial changes
- *
+ *
* Revision 1.22 2000/11/09 11:30:10 rassmann
* WA: Waiting after releasing reset until BCom chip is accessible.
- *
+ *
* Revision 1.21 2000/10/18 12:22:40 cgoos
* Added workaround for half duplex hangup.
- *
+ *
* Revision 1.20 1999/12/06 10:00:44 cgoos
* Added SET event for role.
- *
+ *
* Revision 1.19 1999/11/22 13:58:26 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.18 1999/05/19 07:32:59 cgoos
* Changes for 1000Base-T.
- *
+ *
* Revision 1.17 1999/03/12 13:29:31 malthoff
* Move Autonegotiation Error Codes to skgeinit.h.
- *
+ *
* Revision 1.16 1999/03/08 10:11:28 gklug
* add: AutoNegDone return codes
- *
+ *
* Revision 1.15 1998/11/18 13:20:53 gklug
* add: different timeouts for active and non-active links
- *
+ *
* Revision 1.14 1998/11/04 07:18:14 cgoos
* Added prototype for SkXmRxTxEnable.
- *
+ *
* Revision 1.13 1998/10/21 05:52:23 gklug
* add: parameter DoLoop to InitPhy function
- *
+ *
* Revision 1.12 1998/10/19 06:45:03 cgoos
* Added prototype for SkXmInitPhy.
- *
+ *
* Revision 1.11 1998/10/15 14:34:10 gklug
* add: WA_TIME is 500 msec
- *
+ *
* Revision 1.10 1998/10/14 14:49:41 malthoff
* Remove err log defines E021 and E022. They are
* defined in skgeinit.h now.
*
* Revision 1.9 1998/10/14 14:00:39 gklug
* add: error logs for init phys
- *
+ *
* Revision 1.8 1998/10/14 05:44:05 gklug
* add: E020
- *
+ *
* Revision 1.7 1998/10/02 06:24:58 gklug
* add: error messages
- *
+ *
* Revision 1.6 1998/10/01 07:54:45 gklug
* add: PNMI debug module
- *
+ *
* Revision 1.5 1998/09/28 13:36:31 malthoff
* Move the bit definitions for Autonegotiation
* and Flow Control to skgeinit.h.
- *
+ *
* Revision 1.4 1998/09/15 12:29:34 gklug
* add: error logs
- *
+ *
* Revision 1.3 1998/09/03 13:54:02 gklug
* add: function prototypes
- *
+ *
* Revision 1.2 1998/09/03 10:24:36 gklug
* add: Events send by PNMI
* add: parameter definition for Flow Control etc.
- *
+ *
* Revision 1.1 1998/08/27 11:50:27 gklug
* initial revision
- *
+ *
*
******************************************************************************/
diff --git a/drivers/sk98lin/h/ski2c.h b/drivers/sk98lin/h/ski2c.h
index 5316bba..5ffaf6e 100644
--- a/drivers/sk98lin/h/ski2c.h
+++ b/drivers/sk98lin/h/ski2c.h
@@ -28,88 +28,88 @@
* $Log: ski2c.h,v $
* Revision 1.34 2003/01/28 09:11:21 rschmidt
* Editorial changes
- *
+ *
* Revision 1.33 2002/10/14 16:40:50 rschmidt
* Editorial changes (TWSI)
- *
+ *
* Revision 1.32 2002/08/13 08:55:07 rschmidt
* Editorial changes
- *
+ *
* Revision 1.31 2002/08/06 09:44:22 jschmalz
* Extensions and changes for Yukon
- *
+ *
* Revision 1.30 2001/04/05 11:38:09 rassmann
* Set SenState to idle in SkI2cWaitIrq().
* Changed error message in SkI2cWaitIrq().
- *
+ *
* Revision 1.29 2000/08/03 14:28:17 rassmann
* - Added function to wait for I2C being ready before resetting the board.
* - Replaced one duplicate "out of range" message with correct one.
- *
+ *
* Revision 1.28 1999/11/22 13:55:46 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.27 1999/05/20 09:23:10 cgoos
* Changes for 1000Base-T (Fan sensors).
- *
+ *
* Revision 1.26 1998/12/01 13:45:47 gklug
* add: InitLevel to I2c struct
- *
+ *
* Revision 1.25 1998/11/03 06:55:16 gklug
* add: Dummy Reads to I2c struct
- *
+ *
* Revision 1.24 1998/10/02 14:28:59 cgoos
* Added prototype for SkI2cIsr.
- *
+ *
* Revision 1.23 1998/09/08 12:20:11 gklug
* add: prototypes for init and read functions
- *
+ *
* Revision 1.22 1998/09/08 07:37:56 gklug
* add: log error if PCI_IO voltage sensor could not be initialized
- *
+ *
* Revision 1.21 1998/09/04 08:38:05 malthoff
* Change the values for I2C_READ and I2C_WRITE
- *
+ *
* Revision 1.20 1998/08/25 07:52:22 gklug
* chg: Timestamps (last) added for logging
*
* Revision 1.19 1998/08/25 06:09:00 gklug
* rmv: warning and error levels of the individual sensors.
* add: timing definitions for sending traps and logging errors
- *
+ *
* Revision 1.18 1998/08/20 11:41:15 gklug
* chg: omit STRCPY macro by using char * as Sensor Description
- *
+ *
* Revision 1.17 1998/08/20 11:37:43 gklug
* chg: change Ioc to IoC
- *
+ *
* Revision 1.16 1998/08/20 11:30:38 gklug
* fix: SenRead declaration
- *
+ *
* Revision 1.15 1998/08/20 11:27:53 gklug
* fix: Compile bugs with new awrning constants
- *
+ *
* Revision 1.14 1998/08/20 08:53:12 gklug
* fix: compiler errors
* add: Threshold values
- *
+ *
* Revision 1.13 1998/08/19 12:21:16 gklug
* fix: remove struct from C files (see CCC)
* add: typedefs for all structs
- *
+ *
* Revision 1.12 1998/08/19 10:57:41 gklug
* add: Warning levels
- *
+ *
* Revision 1.11 1998/08/18 08:37:02 malthoff
* Prototypes not required for SK_DIAG.
- *
+ *
* Revision 1.10 1998/08/17 13:54:00 gklug
* fix: declaration of event function
- *
+ *
* Revision 1.9 1998/08/17 06:48:39 malthoff
* Remove some unrequired macros.
* Fix the compiler errors.
- *
+ *
* Revision 1.8 1998/08/14 06:47:19 gklug
* fix: Values are intergers
*
@@ -290,4 +290,3 @@
#endif
#endif /* n_SKI2C_H */
-
diff --git a/drivers/sk98lin/h/skqueue.h b/drivers/sk98lin/h/skqueue.h
index 2bafd6e..bce20a7 100644
--- a/drivers/sk98lin/h/skqueue.h
+++ b/drivers/sk98lin/h/skqueue.h
@@ -29,50 +29,50 @@
* $Log: skqueue.h,v $
* Revision 1.14 2002/03/15 10:52:13 mkunz
* Added event classes for link aggregation
- *
+ *
* Revision 1.13 1999/11/22 13:59:05 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.12 1998/09/08 08:48:01 gklug
* add: init level handling
- *
+ *
* Revision 1.11 1998/09/03 14:15:11 gklug
* add: CSUM and HWAC Eventclass and function.
* fix: pParaPtr according to CCC
- *
+ *
* Revision 1.10 1998/08/20 12:43:03 gklug
* add: typedef SK_QUEUE
- *
+ *
* Revision 1.9 1998/08/19 09:50:59 gklug
* fix: remove struct keyword from c-code (see CCC) add typedefs
- *
+ *
* Revision 1.8 1998/08/18 07:00:01 gklug
* fix: SK_PTR not defined use void * instead.
- *
+ *
* Revision 1.7 1998/08/17 13:43:19 gklug
* chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR
- *
+ *
* Revision 1.6 1998/08/14 07:09:30 gklug
* fix: chg pAc -> pAC
- *
+ *
* Revision 1.5 1998/08/11 14:26:44 gklug
* chg: Event Dispatcher returns now int.
- *
+ *
* Revision 1.4 1998/08/11 12:15:21 gklug
* add: Error numbers of skqueue module
- *
+ *
* Revision 1.3 1998/08/07 12:54:23 gklug
* fix: first compiled version
- *
+ *
* Revision 1.2 1998/08/07 09:34:00 gklug
* adapt structure defs to CCC
* add: prototypes for functions
- *
+ *
* Revision 1.1 1998/07/30 14:52:12 gklug
* Initial version.
* Defines Event Classes, Event structs and queue management variables.
- *
- *
+ *
+ *
*
******************************************************************************/
@@ -145,4 +145,3 @@
#define SKERR_Q_E002 (SKERR_Q_E001+1)
#define SKERR_Q_E002MSG "Undefined event class"
#endif /* _SKQUEUE_H_ */
-
diff --git a/drivers/sk98lin/h/skrlmt.h b/drivers/sk98lin/h/skrlmt.h
index 651bb3f..04d025b 100644
--- a/drivers/sk98lin/h/skrlmt.h
+++ b/drivers/sk98lin/h/skrlmt.h
@@ -28,122 +28,122 @@
* $Log: skrlmt.h,v $
* Revision 1.35 2003/01/31 14:12:41 mkunz
* single port adapter runs now with two identical MAC addresses
- *
+ *
* Revision 1.34 2002/09/23 15:13:41 rwahl
* Editorial changes.
- *
+ *
* Revision 1.33 2001/07/03 12:16:48 mkunz
* New Flag ChgBcPrio (Change priority of last broadcast received)
- *
+ *
* Revision 1.32 2001/02/14 14:06:31 rassmann
* Editorial changes.
- *
+ *
* Revision 1.31 2001/02/05 14:25:26 rassmann
* Prepared RLMT for transparent operation.
- *
+ *
* Revision 1.30 2001/01/22 13:41:39 rassmann
* Supporting two nets on dual-port adapters.
- *
+ *
* Revision 1.29 2000/11/17 08:58:00 rassmann
* Moved CheckSwitch from SK_RLMT_PACKET_RECEIVED to SK_RLMT_TIM event.
- *
+ *
* Revision 1.28 2000/11/09 12:24:34 rassmann
* Editorial changes.
- *
+ *
* Revision 1.27 1999/11/22 13:59:56 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.26 1999/10/04 14:01:19 rassmann
* Corrected reaction to reception of BPDU frames (#10441).
- *
+ *
* Revision 1.25 1999/07/20 12:53:39 rassmann
* Fixed documentation errors for lookahead macros.
- *
+ *
* Revision 1.24 1999/05/28 11:15:56 rassmann
* Changed behaviour to reflect Design Spec v1.2.
* Controlling Link LED(s).
* Introduced RLMT Packet Version field in RLMT Packet.
* Newstyle lookahead macros (checking meta-information before looking at
* the packet).
- *
+ *
* Revision 1.23 1999/01/28 12:50:42 rassmann
* Not using broadcast time stamps in CheckLinkState mode.
- *
+ *
* Revision 1.22 1999/01/27 14:13:04 rassmann
* Monitoring broadcast traffic.
* Switching more reliably and not too early if switch is
* configured for spanning tree.
- *
+ *
* Revision 1.21 1998/12/08 13:11:25 rassmann
* Stopping SegTimer at RlmtStop.
- *
+ *
* Revision 1.20 1998/11/24 12:37:33 rassmann
* Implemented segmentation check.
- *
+ *
* Revision 1.19 1998/11/17 13:43:06 rassmann
* Handling (logical) tx failure.
* Sending packet on logical address after PORT_SWITCH.
- *
+ *
* Revision 1.18 1998/11/13 16:56:56 rassmann
* Added macro version of SkRlmtLookaheadPacket.
- *
+ *
* Revision 1.17 1998/11/06 18:06:05 rassmann
* Corrected timing when RLMT checks fail.
* Clearing tx counter earlier in periodical checks.
- *
+ *
* Revision 1.16 1998/11/03 13:53:50 rassmann
* RLMT should switch now (at least in mode 3).
- *
+ *
* Revision 1.15 1998/10/22 11:39:52 rassmann
* Corrected signed/unsigned mismatches.
* Corrected receive list handling and address recognition.
- *
+ *
* Revision 1.14 1998/10/15 15:16:36 rassmann
* Finished Spanning Tree checking.
* Checked with lint.
- *
+ *
* Revision 1.13 1998/09/24 19:16:08 rassmann
* Code cleanup.
* Introduced Timer for PORT_DOWN due to no RX.
- *
+ *
* Revision 1.12 1998/09/16 11:09:52 rassmann
* Syntax corrections.
- *
+ *
* Revision 1.11 1998/09/15 11:28:50 rassmann
* Syntax corrections.
- *
+ *
* Revision 1.10 1998/09/14 17:07:38 rassmann
* Added code for port checking via LAN.
* Changed Mbuf definition.
- *
+ *
* Revision 1.9 1998/09/07 11:14:15 rassmann
* Syntax corrections.
- *
+ *
* Revision 1.8 1998/09/07 09:06:08 rassmann
* Syntax corrections.
- *
+ *
* Revision 1.7 1998/09/04 19:41:34 rassmann
* Syntax corrections.
* Started entering code for checking local links.
- *
+ *
* Revision 1.6 1998/09/04 12:14:28 rassmann
* Interface cleanup.
- *
+ *
* Revision 1.5 1998/09/02 16:55:29 rassmann
* Updated to reflect new DRV/HWAC/RLMT interface.
- *
+ *
* Revision 1.4 1998/09/02 07:26:02 afischer
* typedef for SK_RLMT_PORT
*
* Revision 1.3 1998/08/27 14:29:03 rassmann
* Code cleanup.
- *
+ *
* Revision 1.2 1998/08/27 14:26:25 rassmann
* Updated interface.
- *
+ *
* Revision 1.1 1998/08/21 08:29:10 rassmann
* First public version.
- *
+ *
******************************************************************************/
/******************************************************************************
@@ -296,28 +296,28 @@
*(pNumBytes) = 0; \
} \
else {\
- if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \
- *(pNumBytes) = 0; \
- } \
- else if (IsBc) { \
- if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \
- *(pNumBytes) = 6; \
- *(pOffset) = 6; \
- } \
- else { \
- *(pNumBytes) = 0; \
- } \
- } \
- else { \
- if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \
- /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
- *(pNumBytes) = 0; \
- } \
- else { \
- *(pNumBytes) = 6; \
- *(pOffset) = 0; \
- } \
- } \
+ if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \
+ *(pNumBytes) = 0; \
+ } \
+ else if (IsBc) { \
+ if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \
+ *(pNumBytes) = 6; \
+ *(pOffset) = 6; \
+ } \
+ else { \
+ *(pNumBytes) = 0; \
+ } \
+ } \
+ else { \
+ if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \
+ /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+ *(pNumBytes) = 0; \
+ } \
+ else { \
+ *(pNumBytes) = 6; \
+ *(pOffset) = 0; \
+ } \
+ } \
} \
}
@@ -516,9 +516,9 @@
/* ----- Private part ----- */
SK_BOOL CheckSwitch;
- SK_BOOL RlmtOff; /* set to zero if the Mac addresses
- are equal or the second one
- is zero */
+ SK_BOOL RlmtOff; /* set to zero if the Mac addresses
+ are equal or the second one
+ is zero */
SK_U16 Align01;
} SK_RLMT;
diff --git a/drivers/sk98lin/h/sktimer.h b/drivers/sk98lin/h/sktimer.h
index 3f5cb1b..36f8ccb 100644
--- a/drivers/sk98lin/h/sktimer.h
+++ b/drivers/sk98lin/h/sktimer.h
@@ -29,32 +29,32 @@
* $Log: sktimer.h,v $
* Revision 1.9 1999/11/22 14:00:29 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.8 1998/09/08 08:48:02 gklug
* add: init level handling
- *
+ *
* Revision 1.7 1998/08/20 12:31:29 gklug
* fix: SK_TIMCTRL needs to be defined
- *
+ *
* Revision 1.6 1998/08/19 09:51:00 gklug
* fix: remove struct keyword from c-code (see CCC) add typedefs
- *
+ *
* Revision 1.5 1998/08/17 13:43:21 gklug
* chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR
- *
+ *
* Revision 1.4 1998/08/14 07:09:31 gklug
* fix: chg pAc -> pAC
- *
+ *
* Revision 1.3 1998/08/07 12:54:24 gklug
* fix: first compiled version
- *
+ *
* Revision 1.2 1998/08/07 09:35:29 gklug
* add: Timer control struct for Adapters context
* add: function prototypes
- *
+ *
* Revision 1.1 1998/08/05 11:27:01 gklug
* First version: adapted from SMT
- *
+ *
*
******************************************************************************/
diff --git a/drivers/sk98lin/h/sktypes.h b/drivers/sk98lin/h/sktypes.h
index 929eca8..e657016 100644
--- a/drivers/sk98lin/h/sktypes.h
+++ b/drivers/sk98lin/h/sktypes.h
@@ -20,7 +20,7 @@
* The information in this file is provided "AS IS" without warranty.
*
******************************************************************************/
-
+
/*****************************************************************************
*
* History:
@@ -28,15 +28,15 @@
* $Log: sktypes.h,v $
* Revision 1.3 2003/02/25 14:16:40 mlindner
* Fix: Copyright statement
- *
+ *
* Revision 1.2 1999/11/22 14:01:58 cgoos
* Changed license header to GPL.
* Now using Linux' fixed size types instead of standard types.
- *
+ *
* Revision 1.1 1999/02/16 07:41:40 cgoos
* First version.
- *
- *
+ *
+ *
*
*****************************************************************************/
@@ -46,7 +46,7 @@
*
* In this file, all data types that are needed by the common modules
* are mapped to Linux data types.
- *
+ *
*
* Include File Hierarchy:
*
diff --git a/drivers/sk98lin/h/skversion.h b/drivers/sk98lin/h/skversion.h
index 74c8608..ef46685 100644
--- a/drivers/sk98lin/h/skversion.h
+++ b/drivers/sk98lin/h/skversion.h
@@ -27,28 +27,26 @@
* $Log: skversion.h,v $
* Revision 1.4 2003/02/25 14:16:40 mlindner
* Fix: Copyright statement
- *
+ *
* Revision 1.3 2003/02/25 13:30:18 mlindner
* Add: Support for various vendors
- *
+ *
* Revision 1.1.2.1 2001/09/05 13:38:30 mlindner
* Removed FILE description
- *
+ *
* Revision 1.1 2001/03/06 09:25:00 mlindner
* first version
- *
- *
+ *
+ *
*
******************************************************************************/
-
-
+
+
static const char SysKonnectFileId[] = "@(#) (C) SysKonnect GmbH.";
static const char SysKonnectBuildNumber[] =
- "@(#)SK-BUILD: 6.05 PL: 01";
+ "@(#)SK-BUILD: 6.05 PL: 01";
#define BOOT_STRING "sk98lin: Network Device Driver v6.05\n" \
"(C)Copyright 1999-2003 Marvell(R)."
#define VER_STRING "6.05"
-
-
diff --git a/drivers/sk98lin/h/skvpd.h b/drivers/sk98lin/h/skvpd.h
index 2433735..1be34c5 100644
--- a/drivers/sk98lin/h/skvpd.h
+++ b/drivers/sk98lin/h/skvpd.h
@@ -29,59 +29,59 @@
* Revision 1.15 2003/01/13 10:39:38 rschmidt
* Replaced define for PCI device Id for YUKON with GENESIS
* Editorial changes
- *
+ *
* Revision 1.14 2002/11/14 15:18:10 gheinig
* Added const specifier to key and buf parameters for VpdPara,VpdRead
* and VpdWrite. This is necessary for the Diag 7 GUI API
- *
+ *
* Revision 1.13 2002/10/14 15:58:18 rschmidt
* Added entry in rom_size struct s_vpd
* Editorial changes
- *
+ *
* Revision 1.12 2002/09/09 14:43:51 mkarl
* added PCI Id of Yukon for reading VPD in diag before the adapter has
* been initialized
* editorial changes
- *
+ *
* Revision 1.11 2002/07/26 13:19:16 mkarl
* added support for Yukon
* added vpd_size to VPD struct
- *
+ *
* Revision 1.10 2000/08/10 11:29:07 rassmann
* Editorial changes.
* Preserving 32-bit alignment in structs for the adapter context.
* Removed unused function VpdWriteDword() (#if 0).
* Made VpdReadKeyword() available for SKDIAG only.
- *
+ *
* Revision 1.9 1999/11/22 14:02:27 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.8 1999/03/11 14:26:40 malthoff
* Replace __STDC__ with SK_KR_PROTO.
- *
+ *
* Revision 1.7 1998/10/28 07:27:17 gklug
* rmv: SWAP macros
* add: VPD_IN/OUT8 macros
* chg: interface definition
- *
+ *
* Revision 1.6 1998/10/22 10:03:44 gklug
* fix: use SK_OUT16 instead of SK_OUTW
- *
+ *
* Revision 1.5 1998/10/14 07:05:31 cgoos
* Changed constants in SK_SWAP_32 to UL.
- *
+ *
* Revision 1.4 1998/08/19 08:14:09 gklug
* fix: remove struct keyword as much as possible from the C-code (see CCC)
- *
+ *
* Revision 1.3 1998/08/18 08:18:56 malthoff
* Modify VPD in and out macros for SK_DIAG
- *
+ *
* Revision 1.2 1998/07/03 14:49:08 malthoff
* Add VPD_INxx() and VPD_OUTxx() macros for the Diagnostics tool.
- *
+ *
* Revision 1.1 1998/06/19 14:08:03 malthoff
* Created.
- *
+ *
*
******************************************************************************/
diff --git a/drivers/sk98lin/h/xmac_ii.h b/drivers/sk98lin/h/xmac_ii.h
index ddddd2b..2ef903a 100644
--- a/drivers/sk98lin/h/xmac_ii.h
+++ b/drivers/sk98lin/h/xmac_ii.h
@@ -30,103 +30,103 @@
* Added defines for copper MDI/MDIX configuration
* Added defines for LED Control Register
* Editorial changes
- *
+ *
* Revision 1.45 2002/12/10 14:35:13 rschmidt
* Corrected defines for Extended PHY Specific Control
* Added defines for Ext. PHY Specific Ctrl 2 Reg. (Fiber specific)
- *
+ *
* Revision 1.44 2002/12/09 14:58:41 rschmidt
* Added defines for Ext. PHY Specific Ctrl Reg. (downshift feature)
* Added 'GMR_FS_UN_SIZE'-Bit to Rx GMAC FIFO Flush Mask
- *
+ *
* Revision 1.43 2002/12/05 10:14:45 rschmidt
* Added define for GMAC's Half Duplex Burst Mode
* Added define for Rx GMAC FIFO Flush Mask (default)
- *
+ *
* Revision 1.42 2002/11/12 16:48:19 rschmidt
* Added defines for Cable Diagnostic Register (GPHY)
* Editorial changes
- *
+ *
* Revision 1.41 2002/10/21 11:20:22 rschmidt
* Added bit GMR_FS_GOOD_FC to GMR_FS_ANY_ERR
* Editorial changes
- *
+ *
* Revision 1.40 2002/10/14 14:54:14 rschmidt
* Added defines for GPHY Specific Status and GPHY Interrupt Status
* Added bits PHY_M_IS_AN_ERROR and PHY_M_IS_FIFO_ERROR to PHY_M_DEF_MSK
* Editorial changes
- *
+ *
* Revision 1.39 2002/10/10 15:53:44 mkarl
* added some bit definitions for link speed status and LED's
- *
+ *
* Revision 1.38 2002/08/21 16:23:46 rschmidt
* Added defines for PHY Specific Ctrl Reg
* Editorial changes
- *
+ *
* Revision 1.37 2002/08/16 14:50:33 rschmidt
* Added defines for Auto-Neg. Advertisement YUKON Fiber (88E1011S only)
* Changed define PHY_M_DEF_MSK for GPHY IRQ Mask
* Editorial changes
- *
+ *
* Revision 1.36 2002/08/12 13:21:10 rschmidt
* Added defines for different Broadcom PHY Ids
- *
+ *
* Revision 1.35 2002/08/08 15:58:01 rschmidt
* Added defines for Manual LED Override register (YUKON)
* Editorial changes
- *
+ *
* Revision 1.34 2002/07/31 17:23:36 rwahl
* Added define GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR).
- *
+ *
* Revision 1.33 2002/07/23 16:03:37 rschmidt
* Added defines for GPHY registers
* Editorial changes
- *
+ *
* Revision 1.32 2002/07/15 18:14:37 rwahl
* Added GMAC MIB counters definitions.
* Editorial changes.
- *
+ *
* Revision 1.31 2002/07/15 15:42:50 rschmidt
* Removed defines from PHY specific reg. which are
* common to all PHYs
* Added defines for GMAC MIB Counters
* Editorial changes
- *
+ *
* Revision 1.30 2002/06/05 08:22:12 rschmidt
* Changed defines for GMAC Rx Control Register and Rx Status
* Editorial changes
- *
+ *
* Revision 1.29 2002/04/25 11:43:56 rschmidt
* Added define PHY_B_AS_PAUSE_MSK for BCom Pause Res.
* Added new registers and defines for YUKON (GMAC, GPHY)
* Added Receive Frame Status Encoding for YUKON
* Editorial changes
- *
+ *
* Revision 1.28 2000/11/09 12:32:49 rassmann
* Renamed variables.
- *
+ *
* Revision 1.27 2000/05/17 11:00:46 malthoff
* Add bit for enable/disable power management in BCOM chip.
- *
+ *
* Revision 1.26 1999/11/22 14:03:00 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.25 1999/08/12 19:19:38 malthoff
* Add PHY_B_AC_TX_TST bit according to BCOM A1 errata sheet.
- *
+ *
* Revision 1.24 1999/07/30 11:27:21 cgoos
* Fixed a missing end-of-comment.
- *
+ *
* Revision 1.23 1999/07/30 07:03:31 malthoff
* Cut some long comments.
* Correct the XMAC PHY ID definitions.
- *
+ *
* Revision 1.22 1999/05/19 07:33:18 cgoos
* Changes for 1000Base-T.
- *
+ *
* Revision 1.21 1999/03/25 07:46:11 malthoff
* Add XM_HW_CFG, XM_TS_READ, and XM_TS_LOAD registers.
- *
+ *
* Revision 1.20 1999/03/12 13:36:09 malthoff
* Remove __STDC__.
*
@@ -912,7 +912,7 @@
/* PHY_AN_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */
/* PHY_AN_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */
/* PHY_AN_RX_PG (see XMAC) Bit 1: Page Received */
-#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */
+#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */
/***** PHY_LONE_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/
#define PHY_L_AN_BP (1<<5) /* Bit 5: Base Page Indication */
@@ -920,7 +920,7 @@
/* PHY_AN_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */
/* PHY_AN_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */
/* PHY_AN_RX_PG (see XMAC) Bit 1: Page Received */
-#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */
+#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */
/***** PHY_XMAC_NEPG 16 bit r/w Next Page Register *****/
@@ -1315,7 +1315,7 @@
#define PHY_M_PC_POL_R_DIS (1<<1) /* Bit 1: Polarity Reversal Disabled */
#define PHY_M_PC_DIS_JABBER (1<<0) /* Bit 0: Disable Jabber */
-#define PHY_M_PC_MDI_XMODE(x) SHIFT5(x)
+#define PHY_M_PC_MDI_XMODE(x) SHIFT5(x)
#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */
#define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */
#define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */
@@ -1614,7 +1614,7 @@
#define GM_GPSR_FC_RX_DIS (1<<2) /* Bit 2: Rx Flow Control Mode Disabled */
#define GM_GPSR_PROM_EN (1<<1) /* Bit 1: Promiscuous Mode Enabled */
/* Bit 0: reserved */
-
+
/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */
/* Bit 15: reserved */
#define GM_GPCR_PROM_ENA (1<<14) /* Bit 14: Enable Promiscuous Mode */
@@ -1636,20 +1636,20 @@
#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\
GM_GPCR_AU_SPD_DIS)
-
+
/* GM_TX_CTRL 16 bit r/w Transmit Control Register */
#define GM_TXCR_FORCE_JAM (1<<15) /* Bit 15: Force Jam / Flow-Control */
#define GM_TXCR_CRC_DIS (1<<14) /* Bit 14: Disable insertion of CRC */
#define GM_TXCR_PAD_DIS (1<<13) /* Bit 13: Disable padding of packets */
#define GM_TXCR_COL_THR (4<<10) /* Bit 12..10: Collision Threshold */
-
+
/* GM_RX_CTRL 16 bit r/w Receive Control Register */
#define GM_RXCR_UCF_ENA (1<<15) /* Bit 15: Enable Unicast filtering */
#define GM_RXCR_MCF_ENA (1<<14) /* Bit 14: Enable Multicast filtering */
#define GM_RXCR_CRC_DIS (1<<13) /* Bit 13: Remove 4-byte CRC */
#define GM_RXCR_PASS_FC (1<<12) /* Bit 12: Pass FC packets to FIFO */
-
+
/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */
#define GM_TXPA_JAMLEN_MSK (0x03<<14) /* Bit 15..14: Jam Length */
#define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13..9: Jam IPG */
@@ -1666,7 +1666,7 @@
#define GM_SMOD_JUMBO_ENA (1<<8) /* Bit 8: Enable Jumbo (Max. Frame Length) */
/* Bit 7..5: reserved */
#define GM_SMOD_IPG_MSK 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */
-
+
#define DATA_BLIND_VAL(x) SHIFT11(x)
#define DATA_BLIND_FAST_ETH 0x1c
#define DATA_BLIND_GIGABIT 4
@@ -1682,13 +1682,13 @@
#define GM_SMI_CT_RD_VAL (1<<4) /* Bit 4: Read Valid (Read completed) */
#define GM_SMI_CT_BUSY (1<<3) /* Bit 3: Busy (Operation in progress) */
/* Bit 2..0: reserved */
-
+
/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */
/* Bit 15..6: reserved */
#define GM_PAR_MIB_CLR (1<<5) /* Bit 5: Set MIB Clear Counter Mode */
#define GM_PAR_MIB_TST (1<<4) /* Bit 4: MIB Load Counter (Test Mode) */
/* Bit 3..0: reserved */
-
+
/* Receive Frame Status Encoding */
#define GMR_FS_LEN (0xffffUL<<16) /* Bit 31..16: Rx Frame Length */
/* Bit 15..14: reserved */