image: Split board code out into its own file

To avoid a large #ifdef in the image.c file, move the affected code into
a separate file.

Avoid any style fix-ups for easier review. Those are in the next patch.

Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/common/image.c b/common/image.c
index e16d433..ed7f188 100644
--- a/common/image.c
+++ b/common/image.c
@@ -8,15 +8,11 @@
 
 #ifndef USE_HOSTCC
 #include <common.h>
-#include <bootstage.h>
-#include <cpu_func.h>
 #include <env.h>
 #include <lmb.h>
 #include <log.h>
 #include <malloc.h>
-#include <asm/cache.h>
 #include <u-boot/crc.h>
-#include <watchdog.h>
 
 #ifdef CONFIG_SHOW_BOOT_PROGRESS
 #include <status_led.h>
@@ -24,14 +20,9 @@
 
 #include <rtc.h>
 
-#include <image.h>
-#include <mapmem.h>
-
 #if IMAGE_ENABLE_FIT || IMAGE_ENABLE_OF_LIBFDT
 #include <linux/libfdt.h>
 #include <fdt_support.h>
-#include <fpga.h>
-#include <xilinx.h>
 #endif
 
 #include <asm/global_data.h>
@@ -47,11 +38,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
-static const image_header_t *image_get_ramdisk(ulong rd_addr, uint8_t arch,
-						int verify);
-#endif
-
 /* Set this if we have less than 4 MB of malloc() space */
 #if CONFIG_SYS_MALLOC_LEN < (4096 * 1024)
 #define CONSERVE_MEMORY		true
@@ -63,7 +49,6 @@
 #include "mkimage.h"
 #include <u-boot/md5.h>
 #include <time.h>
-#include <image.h>
 
 #ifndef __maybe_unused
 # define __maybe_unused		/* unimplemented */
@@ -76,6 +61,7 @@
 #include <abuf.h>
 #include <bzlib.h>
 #include <gzip.h>
+#include <image.h>
 #include <lz4.h>
 #include <imximage.h>
 #include <linux/lzo.h>
@@ -86,10 +72,6 @@
 #include <lzma/LzmaTools.h>
 #include <u-boot/crc.h>
 
-#ifndef CONFIG_SYS_BARGSIZE
-#define CONFIG_SYS_BARGSIZE 512
-#endif
-
 static const table_entry_t uimage_arch[] = {
 	{	IH_ARCH_INVALID,	"invalid",	"Invalid ARCH",	},
 	{	IH_ARCH_ALPHA,		"alpha",	"Alpha",	},
@@ -546,180 +528,7 @@
 	return 0;
 }
 
-#ifndef USE_HOSTCC
-#if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
-/**
- * image_get_ramdisk - get and verify ramdisk image
- * @rd_addr: ramdisk image start address
- * @arch: expected ramdisk architecture
- * @verify: checksum verification flag
- *
- * image_get_ramdisk() returns a pointer to the verified ramdisk image
- * header. Routine receives image start address and expected architecture
- * flag. Verification done covers data and header integrity and os/type/arch
- * fields checking.
- *
- * returns:
- *     pointer to a ramdisk image header, if image was found and valid
- *     otherwise, return NULL
- */
-static const image_header_t *image_get_ramdisk(ulong rd_addr, uint8_t arch,
-						int verify)
-{
-	const image_header_t *rd_hdr = (const image_header_t *)rd_addr;
-
-	if (!image_check_magic(rd_hdr)) {
-		puts("Bad Magic Number\n");
-		bootstage_error(BOOTSTAGE_ID_RD_MAGIC);
-		return NULL;
-	}
-
-	if (!image_check_hcrc(rd_hdr)) {
-		puts("Bad Header Checksum\n");
-		bootstage_error(BOOTSTAGE_ID_RD_HDR_CHECKSUM);
-		return NULL;
-	}
-
-	bootstage_mark(BOOTSTAGE_ID_RD_MAGIC);
-	image_print_contents(rd_hdr);
-
-	if (verify) {
-		puts("   Verifying Checksum ... ");
-		if (!image_check_dcrc(rd_hdr)) {
-			puts("Bad Data CRC\n");
-			bootstage_error(BOOTSTAGE_ID_RD_CHECKSUM);
-			return NULL;
-		}
-		puts("OK\n");
-	}
-
-	bootstage_mark(BOOTSTAGE_ID_RD_HDR_CHECKSUM);
-
-	if (!image_check_os(rd_hdr, IH_OS_LINUX) ||
-	    !image_check_arch(rd_hdr, arch) ||
-	    !image_check_type(rd_hdr, IH_TYPE_RAMDISK)) {
-		printf("No Linux %s Ramdisk Image\n",
-				genimg_get_arch_name(arch));
-		bootstage_error(BOOTSTAGE_ID_RAMDISK);
-		return NULL;
-	}
-
-	return rd_hdr;
-}
-#endif
-#endif /* !USE_HOSTCC */
-
-/*****************************************************************************/
-/* Shared dual-format routines */
-/*****************************************************************************/
-#ifndef USE_HOSTCC
-ulong image_load_addr = CONFIG_SYS_LOAD_ADDR;	/* Default Load Address */
-ulong image_save_addr;			/* Default Save Address */
-ulong image_save_size;			/* Default Save Size (in bytes) */
-
-static int on_loadaddr(const char *name, const char *value, enum env_op op,
-	int flags)
-{
-	switch (op) {
-	case env_op_create:
-	case env_op_overwrite:
-		image_load_addr = hextoul(value, NULL);
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-U_BOOT_ENV_CALLBACK(loadaddr, on_loadaddr);
-
-ulong env_get_bootm_low(void)
-{
-	char *s = env_get("bootm_low");
-	if (s) {
-		ulong tmp = hextoul(s, NULL);
-		return tmp;
-	}
-
-#if defined(CONFIG_SYS_SDRAM_BASE)
-	return CONFIG_SYS_SDRAM_BASE;
-#elif defined(CONFIG_ARM) || defined(CONFIG_MICROBLAZE) || defined(CONFIG_RISCV)
-	return gd->bd->bi_dram[0].start;
-#else
-	return 0;
-#endif
-}
-
-phys_size_t env_get_bootm_size(void)
-{
-	phys_size_t tmp, size;
-	phys_addr_t start;
-	char *s = env_get("bootm_size");
-	if (s) {
-		tmp = (phys_size_t)simple_strtoull(s, NULL, 16);
-		return tmp;
-	}
-
-	start = gd->ram_base;
-	size = gd->ram_size;
-
-	if (start + size > gd->ram_top)
-		size = gd->ram_top - start;
-
-	s = env_get("bootm_low");
-	if (s)
-		tmp = (phys_size_t)simple_strtoull(s, NULL, 16);
-	else
-		tmp = start;
-
-	return size - (tmp - start);
-}
-
-phys_size_t env_get_bootm_mapsize(void)
-{
-	phys_size_t tmp;
-	char *s = env_get("bootm_mapsize");
-	if (s) {
-		tmp = (phys_size_t)simple_strtoull(s, NULL, 16);
-		return tmp;
-	}
-
-#if defined(CONFIG_SYS_BOOTMAPSZ)
-	return CONFIG_SYS_BOOTMAPSZ;
-#else
-	return env_get_bootm_size();
-#endif
-}
-
-void memmove_wd(void *to, void *from, size_t len, ulong chunksz)
-{
-	if (to == from)
-		return;
-
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
-	if (to > from) {
-		from += len;
-		to += len;
-	}
-	while (len > 0) {
-		size_t tail = (len > chunksz) ? chunksz : len;
-		WATCHDOG_RESET();
-		if (to > from) {
-			to -= tail;
-			from -= tail;
-		}
-		memmove(to, from, tail);
-		if (to < from) {
-			to += tail;
-			from += tail;
-		}
-		len -= tail;
-	}
-#else	/* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */
-	memmove(to, from, len);
-#endif	/* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */
-}
-#else	/* USE_HOSTCC */
+#ifdef USE_HOSTCC
 void memmove_wd(void *to, void *from, size_t len, ulong chunksz)
 {
 	memmove(to, from, len);
@@ -982,733 +791,3 @@
 {
 	return (get_table_entry_id(uimage_comp, "Compression", name));
 }
-
-#ifndef USE_HOSTCC
-/**
- * genimg_get_kernel_addr_fit - get the real kernel address and return 2
- *                              FIT strings
- * @img_addr: a string might contain real image address
- * @fit_uname_config: double pointer to a char, will hold pointer to a
- *                    configuration unit name
- * @fit_uname_kernel: double pointer to a char, will hold pointer to a subimage
- *                    name
- *
- * genimg_get_kernel_addr_fit get the real kernel start address from a string
- * which is normally the first argv of bootm/bootz
- *
- * returns:
- *     kernel start address
- */
-ulong genimg_get_kernel_addr_fit(char * const img_addr,
-			     const char **fit_uname_config,
-			     const char **fit_uname_kernel)
-{
-	ulong kernel_addr;
-
-	/* find out kernel image address */
-	if (!img_addr) {
-		kernel_addr = image_load_addr;
-		debug("*  kernel: default image load address = 0x%08lx\n",
-		      image_load_addr);
-#if CONFIG_IS_ENABLED(FIT)
-	} else if (fit_parse_conf(img_addr, image_load_addr, &kernel_addr,
-				  fit_uname_config)) {
-		debug("*  kernel: config '%s' from image at 0x%08lx\n",
-		      *fit_uname_config, kernel_addr);
-	} else if (fit_parse_subimage(img_addr, image_load_addr, &kernel_addr,
-				     fit_uname_kernel)) {
-		debug("*  kernel: subimage '%s' from image at 0x%08lx\n",
-		      *fit_uname_kernel, kernel_addr);
-#endif
-	} else {
-		kernel_addr = hextoul(img_addr, NULL);
-		debug("*  kernel: cmdline image address = 0x%08lx\n",
-		      kernel_addr);
-	}
-
-	return kernel_addr;
-}
-
-/**
- * genimg_get_kernel_addr() is the simple version of
- * genimg_get_kernel_addr_fit(). It ignores those return FIT strings
- */
-ulong genimg_get_kernel_addr(char * const img_addr)
-{
-	const char *fit_uname_config = NULL;
-	const char *fit_uname_kernel = NULL;
-
-	return genimg_get_kernel_addr_fit(img_addr, &fit_uname_config,
-					  &fit_uname_kernel);
-}
-
-/**
- * genimg_get_format - get image format type
- * @img_addr: image start address
- *
- * genimg_get_format() checks whether provided address points to a valid
- * legacy or FIT image.
- *
- * New uImage format and FDT blob are based on a libfdt. FDT blob
- * may be passed directly or embedded in a FIT image. In both situations
- * genimg_get_format() must be able to dectect libfdt header.
- *
- * returns:
- *     image format type or IMAGE_FORMAT_INVALID if no image is present
- */
-int genimg_get_format(const void *img_addr)
-{
-#if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
-	const image_header_t *hdr;
-
-	hdr = (const image_header_t *)img_addr;
-	if (image_check_magic(hdr))
-		return IMAGE_FORMAT_LEGACY;
-#endif
-#if IMAGE_ENABLE_FIT || IMAGE_ENABLE_OF_LIBFDT
-	if (fdt_check_header(img_addr) == 0)
-		return IMAGE_FORMAT_FIT;
-#endif
-#ifdef CONFIG_ANDROID_BOOT_IMAGE
-	if (android_image_check_header(img_addr) == 0)
-		return IMAGE_FORMAT_ANDROID;
-#endif
-
-	return IMAGE_FORMAT_INVALID;
-}
-
-/**
- * fit_has_config - check if there is a valid FIT configuration
- * @images: pointer to the bootm command headers structure
- *
- * fit_has_config() checks if there is a FIT configuration in use
- * (if FTI support is present).
- *
- * returns:
- *     0, no FIT support or no configuration found
- *     1, configuration found
- */
-int genimg_has_config(bootm_headers_t *images)
-{
-#if IMAGE_ENABLE_FIT
-	if (images->fit_uname_cfg)
-		return 1;
-#endif
-	return 0;
-}
-
-/**
- * boot_get_ramdisk - main ramdisk handling routine
- * @argc: command argument count
- * @argv: command argument list
- * @images: pointer to the bootm images structure
- * @arch: expected ramdisk architecture
- * @rd_start: pointer to a ulong variable, will hold ramdisk start address
- * @rd_end: pointer to a ulong variable, will hold ramdisk end
- *
- * boot_get_ramdisk() is responsible for finding a valid ramdisk image.
- * Curently supported are the following ramdisk sources:
- *      - multicomponent kernel/ramdisk image,
- *      - commandline provided address of decicated ramdisk image.
- *
- * returns:
- *     0, if ramdisk image was found and valid, or skiped
- *     rd_start and rd_end are set to ramdisk start/end addresses if
- *     ramdisk image is found and valid
- *
- *     1, if ramdisk image is found but corrupted, or invalid
- *     rd_start and rd_end are set to 0 if no ramdisk exists
- */
-int boot_get_ramdisk(int argc, char *const argv[], bootm_headers_t *images,
-		     uint8_t arch, ulong *rd_start, ulong *rd_end)
-{
-	ulong rd_addr, rd_load;
-	ulong rd_data, rd_len;
-#if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
-	const image_header_t *rd_hdr;
-#endif
-	void *buf;
-#ifdef CONFIG_SUPPORT_RAW_INITRD
-	char *end;
-#endif
-#if IMAGE_ENABLE_FIT
-	const char	*fit_uname_config = images->fit_uname_cfg;
-	const char	*fit_uname_ramdisk = NULL;
-	ulong		default_addr;
-	int		rd_noffset;
-#endif
-	const char *select = NULL;
-
-	*rd_start = 0;
-	*rd_end = 0;
-
-#ifdef CONFIG_ANDROID_BOOT_IMAGE
-	/*
-	 * Look for an Android boot image.
-	 */
-	buf = map_sysmem(images->os.start, 0);
-	if (buf && genimg_get_format(buf) == IMAGE_FORMAT_ANDROID)
-		select = (argc == 0) ? env_get("loadaddr") : argv[0];
-#endif
-
-	if (argc >= 2)
-		select = argv[1];
-
-	/*
-	 * Look for a '-' which indicates to ignore the
-	 * ramdisk argument
-	 */
-	if (select && strcmp(select, "-") ==  0) {
-		debug("## Skipping init Ramdisk\n");
-		rd_len = rd_data = 0;
-	} else if (select || genimg_has_config(images)) {
-#if IMAGE_ENABLE_FIT
-		if (select) {
-			/*
-			 * If the init ramdisk comes from the FIT image and
-			 * the FIT image address is omitted in the command
-			 * line argument, try to use os FIT image address or
-			 * default load address.
-			 */
-			if (images->fit_uname_os)
-				default_addr = (ulong)images->fit_hdr_os;
-			else
-				default_addr = image_load_addr;
-
-			if (fit_parse_conf(select, default_addr,
-					   &rd_addr, &fit_uname_config)) {
-				debug("*  ramdisk: config '%s' from image at "
-						"0x%08lx\n",
-						fit_uname_config, rd_addr);
-			} else if (fit_parse_subimage(select, default_addr,
-						&rd_addr, &fit_uname_ramdisk)) {
-				debug("*  ramdisk: subimage '%s' from image at "
-						"0x%08lx\n",
-						fit_uname_ramdisk, rd_addr);
-			} else
-#endif
-			{
-				rd_addr = hextoul(select, NULL);
-				debug("*  ramdisk: cmdline image address = "
-						"0x%08lx\n",
-						rd_addr);
-			}
-#if IMAGE_ENABLE_FIT
-		} else {
-			/* use FIT configuration provided in first bootm
-			 * command argument. If the property is not defined,
-			 * quit silently.
-			 */
-			rd_addr = map_to_sysmem(images->fit_hdr_os);
-			rd_noffset = fit_get_node_from_config(images,
-					FIT_RAMDISK_PROP, rd_addr);
-			if (rd_noffset == -ENOENT)
-				return 0;
-			else if (rd_noffset < 0)
-				return 1;
-		}
-#endif
-
-		/*
-		 * Check if there is an initrd image at the
-		 * address provided in the second bootm argument
-		 * check image type, for FIT images get FIT node.
-		 */
-		buf = map_sysmem(rd_addr, 0);
-		switch (genimg_get_format(buf)) {
-#if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
-		case IMAGE_FORMAT_LEGACY:
-			printf("## Loading init Ramdisk from Legacy "
-					"Image at %08lx ...\n", rd_addr);
-
-			bootstage_mark(BOOTSTAGE_ID_CHECK_RAMDISK);
-			rd_hdr = image_get_ramdisk(rd_addr, arch,
-							images->verify);
-
-			if (rd_hdr == NULL)
-				return 1;
-
-			rd_data = image_get_data(rd_hdr);
-			rd_len = image_get_data_size(rd_hdr);
-			rd_load = image_get_load(rd_hdr);
-			break;
-#endif
-#if IMAGE_ENABLE_FIT
-		case IMAGE_FORMAT_FIT:
-			rd_noffset = fit_image_load(images,
-					rd_addr, &fit_uname_ramdisk,
-					&fit_uname_config, arch,
-					IH_TYPE_RAMDISK,
-					BOOTSTAGE_ID_FIT_RD_START,
-					FIT_LOAD_OPTIONAL_NON_ZERO,
-					&rd_data, &rd_len);
-			if (rd_noffset < 0)
-				return 1;
-
-			images->fit_hdr_rd = map_sysmem(rd_addr, 0);
-			images->fit_uname_rd = fit_uname_ramdisk;
-			images->fit_noffset_rd = rd_noffset;
-			break;
-#endif
-#ifdef CONFIG_ANDROID_BOOT_IMAGE
-		case IMAGE_FORMAT_ANDROID:
-			android_image_get_ramdisk((void *)images->os.start,
-				&rd_data, &rd_len);
-			break;
-#endif
-		default:
-#ifdef CONFIG_SUPPORT_RAW_INITRD
-			end = NULL;
-			if (select)
-				end = strchr(select, ':');
-			if (end) {
-				rd_len = hextoul(++end, NULL);
-				rd_data = rd_addr;
-			} else
-#endif
-			{
-				puts("Wrong Ramdisk Image Format\n");
-				rd_data = rd_len = rd_load = 0;
-				return 1;
-			}
-		}
-	} else if (images->legacy_hdr_valid &&
-			image_check_type(&images->legacy_hdr_os_copy,
-						IH_TYPE_MULTI)) {
-
-		/*
-		 * Now check if we have a legacy mult-component image,
-		 * get second entry data start address and len.
-		 */
-		bootstage_mark(BOOTSTAGE_ID_RAMDISK);
-		printf("## Loading init Ramdisk from multi component "
-				"Legacy Image at %08lx ...\n",
-				(ulong)images->legacy_hdr_os);
-
-		image_multi_getimg(images->legacy_hdr_os, 1, &rd_data, &rd_len);
-	} else {
-		/*
-		 * no initrd image
-		 */
-		bootstage_mark(BOOTSTAGE_ID_NO_RAMDISK);
-		rd_len = rd_data = 0;
-	}
-
-	if (!rd_data) {
-		debug("## No init Ramdisk\n");
-	} else {
-		*rd_start = rd_data;
-		*rd_end = rd_data + rd_len;
-	}
-	debug("   ramdisk start = 0x%08lx, ramdisk end = 0x%08lx\n",
-			*rd_start, *rd_end);
-
-	return 0;
-}
-
-#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
-/**
- * boot_ramdisk_high - relocate init ramdisk
- * @lmb: pointer to lmb handle, will be used for memory mgmt
- * @rd_data: ramdisk data start address
- * @rd_len: ramdisk data length
- * @initrd_start: pointer to a ulong variable, will hold final init ramdisk
- *      start address (after possible relocation)
- * @initrd_end: pointer to a ulong variable, will hold final init ramdisk
- *      end address (after possible relocation)
- *
- * boot_ramdisk_high() takes a relocation hint from "initrd_high" environment
- * variable and if requested ramdisk data is moved to a specified location.
- *
- * Initrd_start and initrd_end are set to final (after relocation) ramdisk
- * start/end addresses if ramdisk image start and len were provided,
- * otherwise set initrd_start and initrd_end set to zeros.
- *
- * returns:
- *      0 - success
- *     -1 - failure
- */
-int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len,
-		  ulong *initrd_start, ulong *initrd_end)
-{
-	char	*s;
-	ulong	initrd_high;
-	int	initrd_copy_to_ram = 1;
-
-	s = env_get("initrd_high");
-	if (s) {
-		/* a value of "no" or a similar string will act like 0,
-		 * turning the "load high" feature off. This is intentional.
-		 */
-		initrd_high = hextoul(s, NULL);
-		if (initrd_high == ~0)
-			initrd_copy_to_ram = 0;
-	} else {
-		initrd_high = env_get_bootm_mapsize() + env_get_bootm_low();
-	}
-
-
-	debug("## initrd_high = 0x%08lx, copy_to_ram = %d\n",
-			initrd_high, initrd_copy_to_ram);
-
-	if (rd_data) {
-		if (!initrd_copy_to_ram) {	/* zero-copy ramdisk support */
-			debug("   in-place initrd\n");
-			*initrd_start = rd_data;
-			*initrd_end = rd_data + rd_len;
-			lmb_reserve(lmb, rd_data, rd_len);
-		} else {
-			if (initrd_high)
-				*initrd_start = (ulong)lmb_alloc_base(lmb,
-						rd_len, 0x1000, initrd_high);
-			else
-				*initrd_start = (ulong)lmb_alloc(lmb, rd_len,
-								 0x1000);
-
-			if (*initrd_start == 0) {
-				puts("ramdisk - allocation error\n");
-				goto error;
-			}
-			bootstage_mark(BOOTSTAGE_ID_COPY_RAMDISK);
-
-			*initrd_end = *initrd_start + rd_len;
-			printf("   Loading Ramdisk to %08lx, end %08lx ... ",
-					*initrd_start, *initrd_end);
-
-			memmove_wd((void *)*initrd_start,
-					(void *)rd_data, rd_len, CHUNKSZ);
-
-#ifdef CONFIG_MP
-			/*
-			 * Ensure the image is flushed to memory to handle
-			 * AMP boot scenarios in which we might not be
-			 * HW cache coherent
-			 */
-			flush_cache((unsigned long)*initrd_start,
-				    ALIGN(rd_len, ARCH_DMA_MINALIGN));
-#endif
-			puts("OK\n");
-		}
-	} else {
-		*initrd_start = 0;
-		*initrd_end = 0;
-	}
-	debug("   ramdisk load start = 0x%08lx, ramdisk load end = 0x%08lx\n",
-			*initrd_start, *initrd_end);
-
-	return 0;
-
-error:
-	return -1;
-}
-#endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */
-
-int boot_get_setup(bootm_headers_t *images, uint8_t arch,
-		   ulong *setup_start, ulong *setup_len)
-{
-#if IMAGE_ENABLE_FIT
-	return boot_get_setup_fit(images, arch, setup_start, setup_len);
-#else
-	return -ENOENT;
-#endif
-}
-
-#if IMAGE_ENABLE_FIT
-#if defined(CONFIG_FPGA)
-int boot_get_fpga(int argc, char *const argv[], bootm_headers_t *images,
-		  uint8_t arch, const ulong *ld_start, ulong * const ld_len)
-{
-	ulong tmp_img_addr, img_data, img_len;
-	void *buf;
-	int conf_noffset;
-	int fit_img_result;
-	const char *uname, *name;
-	int err;
-	int devnum = 0; /* TODO support multi fpga platforms */
-
-	/* Check to see if the images struct has a FIT configuration */
-	if (!genimg_has_config(images)) {
-		debug("## FIT configuration was not specified\n");
-		return 0;
-	}
-
-	/*
-	 * Obtain the os FIT header from the images struct
-	 */
-	tmp_img_addr = map_to_sysmem(images->fit_hdr_os);
-	buf = map_sysmem(tmp_img_addr, 0);
-	/*
-	 * Check image type. For FIT images get FIT node
-	 * and attempt to locate a generic binary.
-	 */
-	switch (genimg_get_format(buf)) {
-	case IMAGE_FORMAT_FIT:
-		conf_noffset = fit_conf_get_node(buf, images->fit_uname_cfg);
-
-		uname = fdt_stringlist_get(buf, conf_noffset, FIT_FPGA_PROP, 0,
-					   NULL);
-		if (!uname) {
-			debug("## FPGA image is not specified\n");
-			return 0;
-		}
-		fit_img_result = fit_image_load(images,
-						tmp_img_addr,
-						(const char **)&uname,
-						&(images->fit_uname_cfg),
-						arch,
-						IH_TYPE_FPGA,
-						BOOTSTAGE_ID_FPGA_INIT,
-						FIT_LOAD_OPTIONAL_NON_ZERO,
-						&img_data, &img_len);
-
-		debug("FPGA image (%s) loaded to 0x%lx/size 0x%lx\n",
-		      uname, img_data, img_len);
-
-		if (fit_img_result < 0) {
-			/* Something went wrong! */
-			return fit_img_result;
-		}
-
-		if (!fpga_is_partial_data(devnum, img_len)) {
-			name = "full";
-			err = fpga_loadbitstream(devnum, (char *)img_data,
-						 img_len, BIT_FULL);
-			if (err)
-				err = fpga_load(devnum, (const void *)img_data,
-						img_len, BIT_FULL);
-		} else {
-			name = "partial";
-			err = fpga_loadbitstream(devnum, (char *)img_data,
-						 img_len, BIT_PARTIAL);
-			if (err)
-				err = fpga_load(devnum, (const void *)img_data,
-						img_len, BIT_PARTIAL);
-		}
-
-		if (err)
-			return err;
-
-		printf("   Programming %s bitstream... OK\n", name);
-		break;
-	default:
-		printf("The given image format is not supported (corrupt?)\n");
-		return 1;
-	}
-
-	return 0;
-}
-#endif
-
-static void fit_loadable_process(uint8_t img_type,
-				 ulong img_data,
-				 ulong img_len)
-{
-	int i;
-	const unsigned int count =
-			ll_entry_count(struct fit_loadable_tbl, fit_loadable);
-	struct fit_loadable_tbl *fit_loadable_handler =
-			ll_entry_start(struct fit_loadable_tbl, fit_loadable);
-	/* For each loadable handler */
-	for (i = 0; i < count; i++, fit_loadable_handler++)
-		/* matching this type */
-		if (fit_loadable_handler->type == img_type)
-			/* call that handler with this image data */
-			fit_loadable_handler->handler(img_data, img_len);
-}
-
-int boot_get_loadable(int argc, char *const argv[], bootm_headers_t *images,
-		      uint8_t arch, const ulong *ld_start, ulong * const ld_len)
-{
-	/*
-	 * These variables are used to hold the current image location
-	 * in system memory.
-	 */
-	ulong tmp_img_addr;
-	/*
-	 * These two variables are requirements for fit_image_load, but
-	 * their values are not used
-	 */
-	ulong img_data, img_len;
-	void *buf;
-	int loadables_index;
-	int conf_noffset;
-	int fit_img_result;
-	const char *uname;
-	uint8_t img_type;
-
-	/* Check to see if the images struct has a FIT configuration */
-	if (!genimg_has_config(images)) {
-		debug("## FIT configuration was not specified\n");
-		return 0;
-	}
-
-	/*
-	 * Obtain the os FIT header from the images struct
-	 */
-	tmp_img_addr = map_to_sysmem(images->fit_hdr_os);
-	buf = map_sysmem(tmp_img_addr, 0);
-	/*
-	 * Check image type. For FIT images get FIT node
-	 * and attempt to locate a generic binary.
-	 */
-	switch (genimg_get_format(buf)) {
-	case IMAGE_FORMAT_FIT:
-		conf_noffset = fit_conf_get_node(buf, images->fit_uname_cfg);
-
-		for (loadables_index = 0;
-		     uname = fdt_stringlist_get(buf, conf_noffset,
-					FIT_LOADABLE_PROP, loadables_index,
-					NULL), uname;
-		     loadables_index++)
-		{
-			fit_img_result = fit_image_load(images,
-				tmp_img_addr,
-				&uname,
-				&(images->fit_uname_cfg), arch,
-				IH_TYPE_LOADABLE,
-				BOOTSTAGE_ID_FIT_LOADABLE_START,
-				FIT_LOAD_OPTIONAL_NON_ZERO,
-				&img_data, &img_len);
-			if (fit_img_result < 0) {
-				/* Something went wrong! */
-				return fit_img_result;
-			}
-
-			fit_img_result = fit_image_get_node(buf, uname);
-			if (fit_img_result < 0) {
-				/* Something went wrong! */
-				return fit_img_result;
-			}
-			fit_img_result = fit_image_get_type(buf,
-							    fit_img_result,
-							    &img_type);
-			if (fit_img_result < 0) {
-				/* Something went wrong! */
-				return fit_img_result;
-			}
-
-			fit_loadable_process(img_type, img_data, img_len);
-		}
-		break;
-	default:
-		printf("The given image format is not supported (corrupt?)\n");
-		return 1;
-	}
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_SYS_BOOT_GET_CMDLINE
-/**
- * boot_get_cmdline - allocate and initialize kernel cmdline
- * @lmb: pointer to lmb handle, will be used for memory mgmt
- * @cmd_start: pointer to a ulong variable, will hold cmdline start
- * @cmd_end: pointer to a ulong variable, will hold cmdline end
- *
- * boot_get_cmdline() allocates space for kernel command line below
- * BOOTMAPSZ + env_get_bootm_low() address. If "bootargs" U-Boot environment
- * variable is present its contents is copied to allocated kernel
- * command line.
- *
- * returns:
- *      0 - success
- *     -1 - failure
- */
-int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end)
-{
-	char *cmdline;
-	char *s;
-
-	cmdline = (char *)(ulong)lmb_alloc_base(lmb, CONFIG_SYS_BARGSIZE, 0xf,
-				env_get_bootm_mapsize() + env_get_bootm_low());
-
-	if (cmdline == NULL)
-		return -1;
-
-	s = env_get("bootargs");
-	if (!s)
-		s = "";
-
-	strcpy(cmdline, s);
-
-	*cmd_start = (ulong) & cmdline[0];
-	*cmd_end = *cmd_start + strlen(cmdline);
-
-	debug("## cmdline at 0x%08lx ... 0x%08lx\n", *cmd_start, *cmd_end);
-
-	return 0;
-}
-#endif /* CONFIG_SYS_BOOT_GET_CMDLINE */
-
-#ifdef CONFIG_SYS_BOOT_GET_KBD
-/**
- * boot_get_kbd - allocate and initialize kernel copy of board info
- * @lmb: pointer to lmb handle, will be used for memory mgmt
- * @kbd: double pointer to board info data
- *
- * boot_get_kbd() allocates space for kernel copy of board info data below
- * BOOTMAPSZ + env_get_bootm_low() address and kernel board info is initialized
- * with the current u-boot board info data.
- *
- * returns:
- *      0 - success
- *     -1 - failure
- */
-int boot_get_kbd(struct lmb *lmb, struct bd_info **kbd)
-{
-	*kbd = (struct bd_info *)(ulong)lmb_alloc_base(lmb,
-						       sizeof(struct bd_info),
-						       0xf,
-						       env_get_bootm_mapsize() + env_get_bootm_low());
-	if (*kbd == NULL)
-		return -1;
-
-	**kbd = *(gd->bd);
-
-	debug("## kernel board info at 0x%08lx\n", (ulong)*kbd);
-
-#if defined(DEBUG) && defined(CONFIG_CMD_BDI)
-	do_bdinfo(NULL, 0, 0, NULL);
-#endif
-
-	return 0;
-}
-#endif /* CONFIG_SYS_BOOT_GET_KBD */
-
-#ifdef CONFIG_LMB
-int image_setup_linux(bootm_headers_t *images)
-{
-	ulong of_size = images->ft_len;
-	char **of_flat_tree = &images->ft_addr;
-	struct lmb *lmb = &images->lmb;
-	int ret;
-
-	if (IMAGE_ENABLE_OF_LIBFDT)
-		boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree);
-
-	if (IMAGE_BOOT_GET_CMDLINE) {
-		ret = boot_get_cmdline(lmb, &images->cmdline_start,
-				&images->cmdline_end);
-		if (ret) {
-			puts("ERROR with allocation of cmdline\n");
-			return ret;
-		}
-	}
-
-	if (IMAGE_ENABLE_OF_LIBFDT) {
-		ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size);
-		if (ret)
-			return ret;
-	}
-
-	if (IMAGE_ENABLE_OF_LIBFDT && of_size) {
-		ret = image_setup_libfdt(images, *of_flat_tree, of_size, lmb);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-#endif /* CONFIG_LMB */
-#endif /* !USE_HOSTCC */