MX: serial_mxc: cleanup removing nasty #ifdef
The serial driver for iMX SOCs is continuosly changed if a
new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port>
defines were used only to find the base address for the selected UART.
Instead of that, move the base address to the board configuration
file and drop all #ifdef from driver.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Helmut Raiger <helmut.raiger@hale.at>
CC: John Rigby <jcrigby@gmail.com>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
diff --git a/arch/arm/cpu/arm1136/mx31/devices.c b/arch/arm/cpu/arm1136/mx31/devices.c
index b42dac3..2ebee2e 100644
--- a/arch/arm/cpu/arm1136/mx31/devices.c
+++ b/arch/arm/cpu/arm1136/mx31/devices.c
@@ -27,7 +27,6 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
-#ifdef CONFIG_SYS_MX31_UART1
void mx31_uart1_hw_init(void)
{
/* setup pins for UART1 */
@@ -36,9 +35,7 @@
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
}
-#endif
-#ifdef CONFIG_SYS_MX31_UART2
void mx31_uart2_hw_init(void)
{
/* setup pins for UART2 */
@@ -47,7 +44,6 @@
mx31_gpio_mux(MUX_RTS2__UART2_RTS_B);
mx31_gpio_mux(MUX_CTS2__UART2_CTS_B);
}
-#endif
#ifdef CONFIG_MXC_SPI
/*
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index eece138..7f9449b 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -180,8 +180,8 @@
#define IMX_I2C3_BASE (0x43F84000)
#define IMX_CAN1_BASE (0x43F88000)
#define IMX_CAN2_BASE (0x43F8C000)
-#define IMX_UART1_BASE (0x43F90000)
-#define IMX_UART2_BASE (0x43F94000)
+#define UART1_BASE (0x43F90000)
+#define UART2_BASE (0x43F94000)
#define IMX_I2C2_BASE (0x43F98000)
#define IMX_OWIRE_BASE (0x43F9C000)
#define IMX_CSPI1_BASE (0x43FA4000)
@@ -197,15 +197,15 @@
/* SPBA */
#define IMX_SPBA_BASE (0x50000000)
#define IMX_CSPI3_BASE (0x50004000)
-#define IMX_UART4_BASE (0x50008000)
-#define IMX_UART3_BASE (0x5000C000)
+#define UART4_BASE (0x50008000)
+#define UART3_BASE (0x5000C000)
#define IMX_CSPI2_BASE (0x50010000)
#define IMX_SSI2_BASE (0x50014000)
#define IMX_ESAI_BASE (0x50018000)
#define IMX_ATA_DMA_BASE (0x50020000)
#define IMX_SIM1_BASE (0x50024000)
#define IMX_SIM2_BASE (0x50028000)
-#define IMX_UART5_BASE (0x5002C000)
+#define UART5_BASE (0x5002C000)
#define IMX_TSC_BASE (0x50030000)
#define IMX_SSI1_BASE (0x50034000)
#define IMX_FEC_BASE (0x50038000)
diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h
index 83ab216..ced5b2a 100644
--- a/arch/arm/include/asm/arch-mx27/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx27/imx-regs.h
@@ -224,10 +224,10 @@
#define IMX_TIM1_BASE (0x03000 + IMX_IO_BASE)
#define IMX_TIM2_BASE (0x04000 + IMX_IO_BASE)
#define IMX_TIM3_BASE (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE (0x0a000 + IMX_IO_BASE)
-#define IMX_UART2_BASE (0x0b000 + IMX_IO_BASE)
-#define IMX_UART3_BASE (0x0c000 + IMX_IO_BASE)
-#define IMX_UART4_BASE (0x0d000 + IMX_IO_BASE)
+#define UART1_BASE (0x0a000 + IMX_IO_BASE)
+#define UART2_BASE (0x0b000 + IMX_IO_BASE)
+#define UART3_BASE (0x0c000 + IMX_IO_BASE)
+#define UART4_BASE (0x0d000 + IMX_IO_BASE)
#define IMX_I2C1_BASE (0x12000 + IMX_IO_BASE)
#define IMX_GPIO_BASE (0x15000 + IMX_IO_BASE)
#define IMX_TIM4_BASE (0x19000 + IMX_IO_BASE)
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 0147920..6a517dd 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -600,6 +600,12 @@
#define WEIM_ESDCFG1 0xB800100C
#define WEIM_ESDMISC 0xB8001010
+#define UART1_BASE 0x43F90000
+#define UART2_BASE 0x43F94000
+#define UART3_BASE 0x5000C000
+#define UART4_BASE 0x43FB0000
+#define UART5_BASE 0x43FB4000
+
#define ESDCTL_SDE (1 << 31)
#define ESDCTL_CMD_RW (0 << 28)
#define ESDCTL_CMD_PRECHARGE (1 << 28)
diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h
index 25c324e..df74508 100644
--- a/arch/arm/include/asm/arch-mx35/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx35/imx-regs.h
@@ -42,8 +42,8 @@
#define I2C_BASE_ADDR 0x43F80000
#define I2C3_BASE_ADDR 0x43F84000
#define ATA_BASE_ADDR 0x43F8C000
-#define UART1_BASE_ADDR 0x43F90000
-#define UART2_BASE_ADDR 0x43F94000
+#define UART1_BASE 0x43F90000
+#define UART2_BASE 0x43F94000
#define I2C2_BASE_ADDR 0x43F98000
#define CSPI1_BASE_ADDR 0x43FA4000
#define IOMUXC_BASE_ADDR 0x43FAC000
@@ -52,7 +52,7 @@
* SPBA
*/
#define SPBA_BASE_ADDR 0x50000000
-#define UART3_BASE_ADDR 0x5000C000
+#define UART3_BASE 0x5000C000
#define CSPI2_BASE_ADDR 0x50010000
#define ATA_DMA_BASE_ADDR 0x50020000
#define FEC_BASE_ADDR 0x50038000
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index d069209..0ee88d2 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -54,7 +54,7 @@
*/
#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000)
#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000)
-#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000)
+#define UART3_BASE (SPBA0_BASE_ADDR + 0x0000C000)
#define CSPI1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000)
#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000)
#define MMC_SDHC3_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000)
@@ -83,8 +83,8 @@
#define EPIT2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000)
#define PWM1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000)
#define PWM2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000)
-#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000)
-#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000C0000)
+#define UART1_BASE (AIPS1_BASE_ADDR + 0x000BC000)
+#define UART2_BASE (AIPS1_BASE_ADDR + 0x000C0000)
#define SRC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D0000)
#define CCM_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D4000)
#define GPC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D8000)