Initial mpc8610hpcd board files.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
diff --git a/board/freescale/mpc8610hpcd/Makefile b/board/freescale/mpc8610hpcd/Makefile
new file mode 100644
index 0000000..6f5a5c1
--- /dev/null
+++ b/board/freescale/mpc8610hpcd/Makefile
@@ -0,0 +1,57 @@
+# Copyright 2007 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o \
+	../common/sys_eeprom.o \
+	../common/pixis.o
+
+SOBJS	:= init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+.PHONY: distclean
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mpc8610hpcd/config.mk b/board/freescale/mpc8610hpcd/config.mk
new file mode 100644
index 0000000..64ac4dc
--- /dev/null
+++ b/board/freescale/mpc8610hpcd/config.mk
@@ -0,0 +1,25 @@
+# Copyright 2007 Freescale Semiconductor.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xfff00000
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8610=1 -maltivec -mabi=altivec -msoft-float -O2
diff --git a/board/freescale/mpc8610hpcd/init.S b/board/freescale/mpc8610hpcd/init.S
new file mode 100644
index 0000000..68797a8
--- /dev/null
+++ b/board/freescale/mpc8610hpcd/init.S
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc86xx.h>
+
+#define LAWAR_TRGT_PCI1		0x00000000
+#define LAWAR_TRGT_PCIE1	0x00200000
+#define LAWAR_TRGT_PCIE2	0x00100000
+#define LAWAR_TRGT_LBC		0x00400000
+#define LAWAR_TRGT_DDR		0x00f00000
+
+#if !defined(CONFIG_SPD_EEPROM)
+#define LAWBAR1 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff)
+#define LAWAR1	(LAWAR_EN | LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M))
+#else
+#define LAWBAR1 0
+#define LAWAR1	((LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN)
+#endif
+
+#define LAWBAR2 ((CFG_PCIE1_MEM_BASE>>12) & 0xffffff)
+#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR3 ((CFG_PCIE2_MEM_BASE>>12) & 0xffffff)
+#define LAWAR3	(LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR4 ((PIXIS_BASE>>12) & 0xffffff)
+#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_2M))
+
+#define LAWBAR5 ((CFG_PCIE1_IO_PHYS>>12) & 0xffffff)
+#define LAWAR5	(LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
+
+#define LAWBAR6 ((CFG_PCIE2_IO_PHYS>>12) & 0xffffff)
+#define LAWAR6	(LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
+
+#define LAWBAR7 ((CFG_FLASH_BASE >>12) & 0xffffff)
+#define LAWAR7	(LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR8 ((CFG_PCI1_MEM_PHYS>>12) & 0xffffff)
+#define LAWAR8	(LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR9 ((CFG_PCI1_IO_PHYS>>12) & 0xffffff)
+#define LAWAR9	(LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
+
+
+	.section .bootpg, "ax"
+	.globl	law_entry
+law_entry:
+	lis	r7,CFG_CCSRBAR@h
+	ori	r7,r7,CFG_CCSRBAR@l
+
+	addi	r4,r7,0
+	addi	r5,r7,0
+
+	/* Skip LAWAR0, start at LAWAR1 */
+	lis	r6,LAWBAR1@h
+	ori	r6,r6,LAWBAR1@l
+	stwu	r6, 0xc28(r4)
+
+	lis	r6,LAWAR1@h
+	ori	r6,r6,LAWAR1@l
+	stwu	r6, 0xc30(r5)
+
+	/* LAWBAR2, LAWAR2 */
+	lis	r6,LAWBAR2@h
+	ori	r6,r6,LAWBAR2@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR2@h
+	ori	r6,r6,LAWAR2@l
+	stwu	r6, 0x20(r5)
+
+	/* LAWBAR3, LAWAR3 */
+	lis	r6,LAWBAR3@h
+	ori	r6,r6,LAWBAR3@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR3@h
+	ori	r6,r6,LAWAR3@l
+	stwu	r6, 0x20(r5)
+
+	/* LAWBAR4, LAWAR4 */
+	lis	r6,LAWBAR4@h
+	ori	r6,r6,LAWBAR4@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR4@h
+	ori	r6,r6,LAWAR4@l
+	stwu	r6, 0x20(r5)
+	/* LAWBAR5, LAWAR5 */
+	lis	r6,LAWBAR5@h
+	ori	r6,r6,LAWBAR5@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR5@h
+	ori	r6,r6,LAWAR5@l
+	stwu	r6, 0x20(r5)
+
+	/* LAWBAR6, LAWAR6 */
+	lis	r6,LAWBAR6@h
+	ori	r6,r6,LAWBAR6@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR6@h
+	ori	r6,r6,LAWAR6@l
+	stwu	r6, 0x20(r5)
+
+	/* LAWBAR7, LAWAR7 */
+	lis	r6,LAWBAR7@h
+	ori	r6,r6,LAWBAR7@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR7@h
+	ori	r6,r6,LAWAR7@l
+	stwu	r6, 0x20(r5)
+
+	/* LAWBAR8, LAWAR8 */
+	lis	r6,LAWBAR8@h
+	ori	r6,r6,LAWBAR8@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR8@h
+	ori	r6,r6,LAWAR8@l
+	stwu	r6, 0x20(r5)
+
+	/* LAWBAR9, LAWAR9 */
+	lis	r6,LAWBAR9@h
+	ori	r6,r6,LAWBAR9@l
+	stwu	r6, 0x20(r4)
+
+	lis	r6,LAWAR9@h
+	ori	r6,r6,LAWAR9@l
+	stwu	r6, 0x20(r5)
+
+	blr
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
new file mode 100644
index 0000000..63790ca
--- /dev/null
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -0,0 +1,507 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#define DEBUG
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_86xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <spd.h>
+#include <asm/io.h>
+
+
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+extern void ft_cpu_setup(void *blob, bd_t *bd);
+#endif
+
+#include "../common/pixis.h"
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+#if defined(CONFIG_SPD_EEPROM)
+#include "spd_sdram.h"
+#endif
+
+void sdram_init(void);
+long int fixed_sdram(void);
+
+/* called before any console output */
+int board_early_init_f(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+
+	gur->gpiocr |= 0x888a5500; /* DIU16, IR1, UART0, UART2 */
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
+	volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
+
+	puts("Board: MPC8610HPCD\n");
+
+	mcm->abcr |= 0x00010000; /* 0 */
+	mcm->hpmr3 = 0x80000008; /* 4c */
+	mcm->hpmr0 = 0;
+	mcm->hpmr1 = 0;
+	mcm->hpmr2 = 0;
+	mcm->hpmr4 = 0;
+	mcm->hpmr5 = 0;
+
+	return 0;
+}
+
+
+long int
+initdram(int board_type)
+{
+	long dram_size = 0;
+
+#if defined(CONFIG_SPD_EEPROM)
+	dram_size = spd_sdram();
+#else
+	dram_size = fixed_sdram();
+#endif
+
+#if defined(CFG_RAMBOOT)
+	puts(" DDR: ");
+	return dram_size;
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/*
+	 * Initialize and enable DDR ECC.
+	 */
+	ddr_enable_ecc(dram_size);
+#endif
+
+	puts(" DDR: ");
+	return dram_size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	puts("SDRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	puts("SDRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	puts("SDRAM test passed.\n");
+	return 0;
+}
+#endif
+
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+
+long int fixed_sdram(void)
+{
+#if !defined(CFG_RAMBOOT)
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
+	uint d_init;
+
+	ddr->cs0_bnds = 0x0000001f;
+	ddr->cs0_config = 0x80010202;
+
+	ddr->ext_refrec = 0x00000000;
+	ddr->timing_cfg_0 = 0x00260802;
+	ddr->timing_cfg_1 = 0x3935d322;
+	ddr->timing_cfg_2 = 0x14904cc8;
+	ddr->sdram_mode_1 = 0x00480432;
+	ddr->sdram_mode_2 = 0x00000000;
+	ddr->sdram_interval = 0x06180fff; /* 0x06180100; */
+	ddr->sdram_data_init = 0xDEADBEEF;
+	ddr->sdram_clk_cntl = 0x03800000;
+	ddr->sdram_cfg_2 = 0x04400010;
+
+#if defined(CONFIG_DDR_ECC)
+	ddr->err_int_en = 0x0000000d;
+	ddr->err_disable = 0x00000000;
+	ddr->err_sbe = 0x00010000;
+#endif
+	asm("sync;isync");
+
+	udelay(500);
+
+	ddr->sdram_cfg_1 = 0xc3000000; /* 0xe3008000;*/
+
+
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	d_init = 1;
+	debug("DDR - 1st controller: memory initializing\n");
+	/*
+	 * Poll until memory is initialized.
+	 * 512 Meg at 400 might hit this 200 times or so.
+	 */
+	while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0)
+		udelay(1000);
+
+	debug("DDR: memory initialized\n\n");
+	asm("sync; isync");
+	udelay(500);
+#endif
+
+	return 512 * 1024 * 1024;
+#endif
+	return CFG_SDRAM_SIZE * 1024 * 1024;
+}
+
+#endif
+
+#if defined(CONFIG_PCI)
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_fsl86xxads_config_table[] = {
+	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
+	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+				 PCI_ENET0_MEMADDR,
+				 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} },
+	{}
+};
+#endif
+
+
+static struct pci_controller pci1_hose = {
+#ifndef CONFIG_PCI_PNP
+config_table:pci_mpc86xxcts_config_table
+#endif
+};
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif
+
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif
+
+int first_free_busno = 0;
+
+void pci_init_board(void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	uint devdisr = gur->devdisr;
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+	printf( " pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
+		devdisr, io_sel, host_agent);
+
+
+#ifdef CONFIG_PCIE1
+ {
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie1_hose;
+	int pcie_configured = (io_sel == 1) || (io_sel == 4);
+	int pcie_ep = (host_agent == 0) || (host_agent == 2) ||
+		(host_agent == 5);
+
+	if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)) {
+		printf(" PCIe 1 connected to Uli as %s (base address %x)\n",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+		if (pci->pme_msg_det)
+			pci->pme_msg_det = 0xffffffff;
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			 CFG_PCI_MEMORY_BUS,
+			 CFG_PCI_MEMORY_PHYS,
+			 CFG_PCI_MEMORY_SIZE,
+			 PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			 CFG_PCIE1_MEM_BASE,
+			 CFG_PCIE1_MEM_PHYS,
+			 CFG_PCIE1_MEM_SIZE,
+			 PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			 CFG_PCIE1_IO_BASE,
+			 CFG_PCIE1_IO_PHYS,
+			 CFG_PCIE1_IO_SIZE,
+			 PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int)&pci->cfg_addr,
+				 (int)&pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf(" PCI-Express 1 on bus %02x - %02x\n",
+			hose->first_busno, hose->last_busno);
+
+	} else
+		puts(" PCI-Express 1: Disabled\n");
+ }
+#else
+	puts("PCI-Express 1: Disabled\n");
+#endif /* CONFIG_PCIE1 */
+
+
+#ifdef CONFIG_PCIE2
+ {
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie2_hose;
+
+	int pcie_configured = (io_sel == 0) || (io_sel == 4);
+	int pcie_ep = (host_agent == 0) || (host_agent == 1) ||
+		(host_agent == 4);
+
+	if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)) {
+		printf(" PCI-Express 2 connected to slot as %s" \
+			" (base address %x)\n",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+		if (pci->pme_msg_det)
+			pci->pme_msg_det = 0xffffffff;
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			 CFG_PCI_MEMORY_BUS,
+			 CFG_PCI_MEMORY_PHYS,
+			 CFG_PCI_MEMORY_SIZE,
+			 PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			 CFG_PCIE2_MEM_BASE,
+			 CFG_PCIE2_MEM_PHYS,
+			 CFG_PCIE2_MEM_SIZE,
+			 PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			 CFG_PCIE2_IO_BASE,
+			 CFG_PCIE2_IO_PHYS,
+			 CFG_PCIE2_IO_SIZE,
+			 PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int)&pci->cfg_addr,
+				 (int)&pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf(" PCI-Express 2 on bus %02x - %02x\n",
+			hose->first_busno, hose->last_busno);
+	} else
+		puts(" PCI-Express 2: Disabled\n");
+ }
+#else
+	puts("PCI-Express 2: Disabled\n");
+#endif /* CONFIG_PCIE2 */
+
+
+#ifdef CONFIG_PCI1
+ {
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pci1_hose;
+	int pci_agent = (host_agent >= 4) && (host_agent <= 6);
+
+	if ( !(devdisr & MPC86xx_DEVDISR_PCI1)) {
+		printf(" PCI connected to PCI slots as %s" \
+			" (base address %x)\n",
+			pci_agent ? "Agent" : "Host",
+			(uint)pci);
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			 CFG_PCI_MEMORY_BUS,
+			 CFG_PCI_MEMORY_PHYS,
+			 CFG_PCI_MEMORY_SIZE,
+			 PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			 CFG_PCI1_MEM_BASE,
+			 CFG_PCI1_MEM_PHYS,
+			 CFG_PCI1_MEM_SIZE,
+			 PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			 CFG_PCI1_IO_BASE,
+			 CFG_PCI1_IO_PHYS,
+			 CFG_PCI1_IO_SIZE,
+			 PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr,
+				 (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf(" PCI on bus %02x - %02x\n",
+			hose->first_busno, hose->last_busno);
+
+
+	} else
+		puts(" PCI: Disabled\n");
+ }
+#endif /* CONFIG_PCI1 */
+}
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+	ft_cpu_setup(blob, bd);
+
+	p = ft_get_prop(blob, "/memory/reg", &len);
+	if (p != NULL) {
+		*p++ = cpu_to_be32(bd->bi_memstart);
+		*p = cpu_to_be32(bd->bi_memsize);
+	}
+
+#ifdef CONFIG_PCI1
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = 0;
+		p[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+		debug("pci@8000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+	}
+#endif
+#ifdef CONFIG_PCIE1
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@a000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = 0;
+		p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+		debug("pcie@9000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+	}
+#endif
+#ifdef CONFIG_PCIE2
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@9000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = 0;
+		p[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
+		debug("pcie@9000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+	}
+#endif
+
+}
+#endif
+
+/*
+ * get_board_sys_clk
+ * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ
+ */
+
+unsigned long
+get_board_sys_clk(ulong dummy)
+{
+	u8 i, go_bit, rd_clks;
+	ulong val = 0;
+	ulong a;
+
+	a = PIXIS_BASE + PIXIS_SPD;
+	i = in8(a);
+	i &= 0x07;
+
+	switch (i) {
+	case 0:
+		val = 33333000;
+		break;
+	case 1:
+		val = 39999600;
+		break;
+	case 2:
+		val = 49999500;
+		break;
+	case 3:
+		val = 66666000;
+		break;
+	case 4:
+		val = 83332500;
+		break;
+	case 5:
+		val = 99999000;
+		break;
+	case 6:
+		val = 133332000;
+		break;
+	case 7:
+		val = 166665000;
+		break;
+	}
+
+	return val;
+}
diff --git a/board/freescale/mpc8610hpcd/u-boot.lds b/board/freescale/mpc8610hpcd/u-boot.lds
new file mode 100644
index 0000000..ae9c6c4
--- /dev/null
+++ b/board/freescale/mpc8610hpcd/u-boot.lds
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+
+SECTIONS
+{
+
+  /* Read-only sections, merged into text segment: */
+  .interp : { *(.interp) }
+  .hash		 : { *(.hash)		}
+  .dynsym	 : { *(.dynsym)		}
+  .dynstr	 : { *(.dynstr)		}
+  .rel.text	 : { *(.rel.text)	}
+  .rela.text	 : { *(.rela.text)	}
+  .rel.data	 : { *(.rel.data)	}
+  .rela.data	 : { *(.rela.data)	}
+  .rel.rodata	 : { *(.rel.rodata)	}
+  .rela.rodata	 : { *(.rela.rodata)	}
+  .rel.got	 : { *(.rel.got)	}
+  .rela.got	 : { *(.rela.got)	}
+  .rel.ctors	 : { *(.rel.ctors)	}
+  .rela.ctors	 : { *(.rela.ctors)	}
+  .rel.dtors	 : { *(.rel.dtors)	}
+  .rela.dtors	 : { *(.rela.dtors)	}
+  .rel.bss	 : { *(.rel.bss)	}
+  .rela.bss	 : { *(.rela.bss)	}
+  .rel.plt	 : { *(.rel.plt)	}
+  .rela.plt	 : { *(.rela.plt)	}
+  .init		 : { *(.init)	}
+  .plt : { *(.plt) }
+  .text :
+  {
+    cpu/mpc86xx/start.o	(.text)
+    board/freescale/mpc8610hpcd/init.o (.bootpg)
+    cpu/mpc86xx/traps.o (.text)
+    cpu/mpc86xx/interrupts.o (.text)
+    cpu/mpc86xx/cpu_init.o (.text)
+    cpu/mpc86xx/cpu.o (.text)
+    cpu/mpc86xx/speed.o (.text)
+    common/dlmalloc.o (.text)
+    lib_generic/crc32.o (.text)
+    lib_ppc/extable.o (.text)
+    lib_generic/zlib.o (.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+   }
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini	     : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data	   :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss	     :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}