x86: ivybridge: Add SATA init
Add code to set up the SATA interfaces on boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/x86/include/asm/arch-ivybridge/bd82x6x.h b/arch/x86/include/asm/arch-ivybridge/bd82x6x.h
index e02520c..644755f 100644
--- a/arch/x86/include/asm/arch-ivybridge/bd82x6x.h
+++ b/arch/x86/include/asm/arch-ivybridge/bd82x6x.h
@@ -7,6 +7,8 @@
#ifndef _ASM_ARCH_BD82X6X_H
#define _ASM_ARCH_BD82X6X_H
+void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node);
+void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node);
void bd82x6x_pci_init(pci_dev_t dev);
int bd82x6x_init_pci_devices(void);
int bd82x6x_init(void);
diff --git a/arch/x86/include/asm/arch-ivybridge/pch.h b/arch/x86/include/asm/arch-ivybridge/pch.h
index b3ec7c5..21df083 100644
--- a/arch/x86/include/asm/arch-ivybridge/pch.h
+++ b/arch/x86/include/asm/arch-ivybridge/pch.h
@@ -122,6 +122,64 @@
#define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */
#define LPC_GENX_DEC(x) (0x84 + 4 * (x))
+/* PCI Configuration Space (D31:F1): IDE */
+#define PCH_IDE_DEV PCI_BDF(0, 0x1f, 1)
+#define PCH_SATA_DEV PCI_BDF(0, 0x1f, 2)
+#define PCH_SATA2_DEV PCI_BDF(0, 0x1f, 5)
+
+#define INTR_LN 0x3c
+#define IDE_TIM_PRI 0x40 /* IDE timings, primary */
+#define IDE_DECODE_ENABLE (1 << 15)
+#define IDE_SITRE (1 << 14)
+#define IDE_ISP_5_CLOCKS (0 << 12)
+#define IDE_ISP_4_CLOCKS (1 << 12)
+#define IDE_ISP_3_CLOCKS (2 << 12)
+#define IDE_RCT_4_CLOCKS (0 << 8)
+#define IDE_RCT_3_CLOCKS (1 << 8)
+#define IDE_RCT_2_CLOCKS (2 << 8)
+#define IDE_RCT_1_CLOCKS (3 << 8)
+#define IDE_DTE1 (1 << 7)
+#define IDE_PPE1 (1 << 6)
+#define IDE_IE1 (1 << 5)
+#define IDE_TIME1 (1 << 4)
+#define IDE_DTE0 (1 << 3)
+#define IDE_PPE0 (1 << 2)
+#define IDE_IE0 (1 << 1)
+#define IDE_TIME0 (1 << 0)
+#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */
+
+#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */
+#define IDE_SSDE1 (1 << 3)
+#define IDE_SSDE0 (1 << 2)
+#define IDE_PSDE1 (1 << 1)
+#define IDE_PSDE0 (1 << 0)
+
+#define IDE_SDMA_TIM 0x4a
+
+#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */
+#define SIG_MODE_SEC_NORMAL (0 << 18)
+#define SIG_MODE_SEC_TRISTATE (1 << 18)
+#define SIG_MODE_SEC_DRIVELOW (2 << 18)
+#define SIG_MODE_PRI_NORMAL (0 << 16)
+#define SIG_MODE_PRI_TRISTATE (1 << 16)
+#define SIG_MODE_PRI_DRIVELOW (2 << 16)
+#define FAST_SCB1 (1 << 15)
+#define FAST_SCB0 (1 << 14)
+#define FAST_PCB1 (1 << 13)
+#define FAST_PCB0 (1 << 12)
+#define SCB1 (1 << 3)
+#define SCB0 (1 << 2)
+#define PCB1 (1 << 1)
+#define PCB0 (1 << 0)
+
+#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */
+#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */
+#define SATA_SP 0xd0 /* Scratchpad */
+
+/* SATA IOBP Registers */
+#define SATA_IOBP_SP0G3IR 0xea000151
+#define SATA_IOBP_SP1G3IR 0xea000051
+
/* PCI Configuration Space (D31:F3): SMBus */
#define PCH_SMBUS_DEV PCI_BDF(0, 0x1f, 3)
#define SMB_BASE 0x20