SPL: Makefile: Build a separate autoconf.mk for SPL
SPL defines CONFIG_SPL_BUILD but this does not percolate to the
autoconf.mk Makefile. As a result the build breaks when
CONFIG_SPL_BUILD is used in the board-specific include header file. With
this, there is a possibility of having a CONFIG option defined in the
header file but not defined in the Makefile causing all kinds of build
failure and problems.
It also messes things for up, for example, when one might want to
undefine options to keep the SPL small and doesn't want to be stuck with
the CONFIG options used for U-boot. Lastly, this also avoids defining
special CONFIG_SPL_ variables for cases where some options are required
in U-boot but not in SPL.
We add a spl-autoconf.mk rule that is generated for SPL with the
CONFIG_SPL_BUILD flag and conditionally include it for SPL builds.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Ying Zhang <b40530@freescale.com>
diff --git a/Makefile b/Makefile
index 671308f..43b57da 100644
--- a/Makefile
+++ b/Makefile
@@ -613,6 +613,7 @@
# Explicitly make _depend in subdirs containing multiple targets to prevent
# parallel sub-makes creating .depend files simultaneously.
depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \
+ $(obj)include/spl-autoconf.mk \
$(obj)include/autoconf.mk \
$(obj)include/generated/generic-asm-offsets.h \
$(obj)include/generated/asm-offsets.h
@@ -694,12 +695,23 @@
sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
mv $@.tmp $@
+# Auto-generate the spl-autoconf.mk file (which is included by all makefiles for SPL)
+$(obj)include/spl-autoconf.mk: $(obj)include/config.h
+ @$(XECHO) Generating $@ ; \
+ set -e ; \
+ : Extract the config macros ; \
+ $(CPP) $(CFLAGS) -DCONFIG_SPL_BUILD -DDO_DEPS_ONLY -dM include/common.h | \
+ sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
+ mv $@.tmp $@
+
$(obj)include/generated/generic-asm-offsets.h: $(obj)include/autoconf.mk.dep \
+ $(obj)include/spl-autoconf.mk \
$(obj)lib/asm-offsets.s
@$(XECHO) Generating $@
tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@
$(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \
+ $(obj)include/spl-autoconf.mk \
$(src)lib/asm-offsets.c
@mkdir -p $(obj)lib
$(CC) -DDO_DEPS_ONLY \
@@ -707,11 +719,13 @@
-o $@ $(src)lib/asm-offsets.c -c -S
$(obj)include/generated/asm-offsets.h: $(obj)include/autoconf.mk.dep \
+ $(obj)include/spl-autoconf.mk \
$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
@$(XECHO) Generating $@
tools/scripts/make-asm-offsets $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s $@
-$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s: $(obj)include/autoconf.mk.dep
+$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s: $(obj)include/autoconf.mk.dep \
+ $(obj)include/spl-autoconf.mk
@mkdir -p $(obj)$(CPUDIR)/$(SOC)
if [ -f $(src)$(CPUDIR)/$(SOC)/asm-offsets.c ];then \
$(CC) -DDO_DEPS_ONLY \
@@ -783,7 +797,8 @@
unconfig:
@rm -f $(obj)include/config.h $(obj)include/config.mk \
$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
- $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
+ $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep \
+ $(obj)include/spl-autoconf.mk
%_config:: unconfig
@$(MKCONFIG) -A $(@:_config=)
diff --git a/config.mk b/config.mk
index 3e84f36..54e99f4 100644
--- a/config.mk
+++ b/config.mk
@@ -145,7 +145,13 @@
#########################################################################
# Load generated board configuration
+ifeq ($(CONFIG_SPL_BUILD),y)
+# Include SPL autoconf
+sinclude $(OBJTREE)/include/spl-autoconf.mk
+else
+# Include normal autoconf
sinclude $(OBJTREE)/include/autoconf.mk
+endif
sinclude $(OBJTREE)/include/config.mk
# Some architecture config.mk files need to know what CPUDIR is set to,
diff --git a/spl/Makefile b/spl/Makefile
index 28ebc96..02f4860 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -80,6 +80,7 @@
LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o
LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o
LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o
+LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/libphy.o
LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o
LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o