ppc/p4080: Determine various chip frequencies on CoreNet platforms
The means to determine the core, bus, and DDR frequencies are completely
new on CoreNet style platforms. Additionally on p4080 we can have
different frequencies for FMAN and PME IP blocks. We need to keep track
of the FMAN & PME frequencies since they are used for time stamping
capabilities inside each block.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 25c0416..0cc6e03 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -46,11 +46,20 @@
char buf1[32], buf2[32];
#ifdef CONFIG_DDR_CLK_FREQ
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_FSL_CORENET
+ u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
+ >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
+#else
u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
+#endif
+#else
+#ifdef CONFIG_FSL_CORENET
+ u32 ddr_sync = 0;
#else
u32 ddr_ratio = 0;
#endif
+#endif /* CONFIG_DDR_CLK_FREQ */
int i;
svr = get_svr();
@@ -111,6 +120,19 @@
}
printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
+#ifdef CONFIG_FSL_CORENET
+ if (ddr_sync == 1) {
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Synchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+ } else {
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Asynchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+ }
+#else
switch (ddr_ratio) {
case 0x0:
printf(" DDR:%-4s MHz (%s MT/s data rate), ",
@@ -118,22 +140,26 @@
strmhz(buf2, sysinfo.freqDDRBus));
break;
case 0x7:
- printf(" DDR:%-4s MHz (%s MT/s data rate) (Synchronous), ",
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Synchronous), ",
strmhz(buf1, sysinfo.freqDDRBus/2),
strmhz(buf2, sysinfo.freqDDRBus));
break;
default:
- printf(" DDR:%-4s MHz (%s MT/s data rate) (Asynchronous), ",
+ printf(" DDR:%-4s MHz (%s MT/s data rate) "
+ "(Asynchronous), ",
strmhz(buf1, sysinfo.freqDDRBus/2),
strmhz(buf2, sysinfo.freqDDRBus));
break;
}
+#endif
- if (sysinfo.freqLocalBus > LCRR_CLKDIV)
+ if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
- else
+ } else {
printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
sysinfo.freqLocalBus);
+ }
#ifdef CONFIG_CPM2
printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
@@ -143,6 +169,17 @@
printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE));
#endif
+#ifdef CONFIG_SYS_DPAA_FMAN
+ for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
+ printf(" FMAN%d: %s MHz\n", i,
+ strmhz(buf1, sysinfo.freqFMan[i]));
+ }
+#endif
+
+#ifdef CONFIG_SYS_DPAA_PME
+ printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME));
+#endif
+
puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
return 0;