global: Remove CONFIG_SYS_USE_DATAFLASH*
There are a handful of variants around CONFIG_SYS_USE_DATAFLASH and none
of them now control anything further within their board config.h files,
so remove these from CONFIG_SYS_EXTRA_OPTIONS and then remove the empty
blocks in the board config.h files. In a few places further clean up
related logic.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 4252a8c..f5cc0b2 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -67,16 +67,4 @@
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#elif defined(CONFIG_SYS_USE_NANDFLASH)
-
-/* bootstrap + u-boot + env + linux in nandflash */
-
-#else /* CONFIG_SYS_USE_MMC */
-/* bootstrap + u-boot + env + linux in mmc */
-/* For FAT system, most cases it should be in the reserved sector */
-#endif
-
#endif
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 4e72bf5..55ddb38 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -64,17 +64,4 @@
#endif
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-
-#elif CONFIG_SYS_USE_DATAFLASH_CS3
-
-/* bootstrap + u-boot + env + linux in dataflash on CS3 */
-
-#else /* CONFIG_SYS_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#endif
-
#endif
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 15df8f3..9fdf48b 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -187,13 +187,4 @@
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-
-#elif CONFIG_SYS_USE_NANDFLASH
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#endif
-
#endif
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 0105cb0..e0aeae8 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -46,18 +46,4 @@
#endif
-/* Ethernet - not present */
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-
-#elif CONFIG_SYS_USE_NANDFLASH
-
-/* bootstrap + u-boot + env + linux in nandflash */
-
-#else /* CONFIG_SYS_USE_MMC */
-
-/* bootstrap + u-boot + env + linux in mmc */
-#endif
#endif
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index c813136..013c7cf 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -54,14 +54,6 @@
#endif
#endif
-#ifdef CONFIG_NAND_BOOT
-/* bootstrap + u-boot + env + linux in nandflash */
-#elif defined(CONFIG_SPI_BOOT)
-/* bootstrap + u-boot + env + linux in spi flash */
-#elif defined(CONFIG_SYS_USE_DATAFLASH)
-/* bootstrap + u-boot + env + linux in data flash */
-#endif
-
/* SPL */
#define CONFIG_SPL_MAX_SIZE 0x6000
#define CONFIG_SPL_STACK 0x308000
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index fa4513b..6b6c90e 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -69,16 +69,6 @@
/* hw-controller addresses */
#define CONFIG_ET1100_BASE 0x70000000
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env in dataflash on CS0 */
-
-#elif CONFIG_SYS_USE_NANDFLASH
-
-/* bootstrap + u-boot + env + linux in nandflash */
-
-#endif
-
#define CONFIG_SYS_CBSIZE 512
#endif
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 87f216b..1db8279 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -160,35 +160,13 @@
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#undef CONFIG_SYS_USE_DATAFLASH_CS0
-#undef CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SYS_USE_FLASH 1
-
-#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-
-#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-
-#elif defined (CONFIG_SYS_USE_FLASH)
-/* JFFS Partition offset set */
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
-/* 512k reserved for u-boot */
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11
-
-#define CONFIG_CON_ROT "fbcon=rotate:3 "
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"partition=nand0,0\0" \
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
- CONFIG_CON_ROT \
+ "fbcon=rotate:3 " \
"nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
@@ -199,9 +177,6 @@
"run nfsargs;run addip;bootm 22000000\0" \
"flashboot=run ramargs;run addip;bootm 0x10050000\0" \
""
-#else
-#error "Undefined memory device"
-#endif
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 3be7e1c..143e9f5 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -183,37 +183,13 @@
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_SYS_USE_FLASH 1
-#undef CONFIG_SYS_USE_DATAFLASH
-#undef CONFIG_SYS_USE_NANDFLASH
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-
-#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-
-#elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */
-/* JFFS Partition offset set */
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
-/* 512k reserved for u-boot */
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11
-
-#define CONFIG_ROOTPATH "/ronetix/rootfs"
-
-#define CONFIG_CON_ROT "fbcon=rotate:3 "
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"partition=nand0,0\0" \
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
- CONFIG_CON_ROT \
+ "fbcon=rotate:3 " \
"nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
@@ -225,10 +201,6 @@
"flashboot=run ramargs;run addip;bootm 0x10050000\0" \
""
-#else
-#error "Undefined memory device"
-#endif
-
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
GENERATED_GBL_DATA_SIZE)