powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
The BSC9132 is a highly integrated device that targets the evolving
Microcell, Picocell, and Enterprise-Femto base station market subsegments.
The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850
core technologies with MAPLE-B2P baseband acceleration processing elements
to address the need for a high performance, low cost, integrated solution
that handles all required processing layers without the need for an
external device except for an RF transceiver or, in a Micro base station
configuration, a host device that handles the L3/L4 and handover between
sectors.
The BSC9132 SoC includes the following function and features:
- Power Architecture subsystem including two e500 processors with
512-Kbyte shared L2 cache
- Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2
cache
- 32 Kbyte of shared M3 memory
- The Multi Accelerator Platform Engine for Pico BaseStation Baseband
Processing (MAPLE-B2P)
- Two DDR3/3L memory interfaces with 32-bit data width (40 bits including
ECC), up to 1333 MHz data rate
- Dedicated security engine featuring trusted boot
- Two DMA controllers
- OCNDMA with four bidirectional channels
- SysDMA with sixteen bidirectional channels
- Interfaces
- Four-lane SerDes PHY
- PCI Express controller complies with the PEX Specification-Rev 2.0
- Two Common Public Radio Interface (CPRI) controller lanes
- High-speed USB 2.0 host and device controller with ULPI interface
- Enhanced secure digital (SD/MMC) host controller (eSDHC)
- Antenna interface controller (AIC), supporting four industry
standard JESD207/four custom ADI RF interfaces
- ADI lanes support both full duplex FDD support & half duplex TDD
- Universal Subscriber Identity Module (USIM) interface that
facilitates communication to SIM cards or Eurochip pre-paid phone
cards
- Two DUART, two eSPI, and two I2C controllers
- Integrated Flash memory controller (IFC)
- GPIO
- Sixteen 32-bit timers
Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
diff --git a/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
new file mode 100644
index 0000000..300a4db
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Author: Prabhakar Kushwaha <prabhakar@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+#define SRDS1_MAX_LANES 4
+
+static u32 serdes1_prtcl_map;
+
+static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
+ [0] = {NONE, NONE, NONE, NONE},
+ [1] = {PCIE1, PCIE2, CPRI2, CPRI1},
+ [2] = {PCIE1, PCIE2, CPRI2, CPRI1},
+ [3] = {PCIE1, PCIE2, CPRI2, CPRI1},
+ [4] = {PCIE1, PCIE2, CPRI2, CPRI1},
+ [5] = {PCIE1, PCIE2, CPRI2, CPRI1},
+ [6] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+ [7] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+ [8] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+ [9] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+ [10] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+ [11] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2},
+ [12] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+ [13] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+ [14] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+ [15] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+ [16] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+ [17] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+ [18] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+ [19] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+ [20] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+ [21] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+ [22] = {PCIE1, PCIE2, CPRI2, CPRI1},
+ [23] = {PCIE1, PCIE2, CPRI2, CPRI1},
+ [24] = {PCIE1, PCIE2, CPRI2, CPRI1},
+ [25] = {PCIE1, PCIE2, CPRI2, CPRI1},
+ [26] = {PCIE1, PCIE2, CPRI2, CPRI1},
+ [27] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+ [28] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+ [29] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+ [30] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+ [31] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+ [32] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2},
+ [33] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+ [34] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+ [35] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+ [36] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+ [37] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+ [38] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+ [39] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+ [40] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+ [41] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+ [42] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+ [43] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+ [44] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+ [45] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+ [46] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+ [47] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+};
+
+int is_serdes_configured(enum srds_prtcl prtcl)
+{
+ return (1 << prtcl) & serdes1_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 pordevsr = in_be32(&gur->pordevsr);
+ u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+ MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ int lane;
+
+ debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
+
+ if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
+ printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+ return;
+ }
+
+ for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
+ serdes1_prtcl_map |= (1 << lane_prtcl);
+ }
+}