ddr: altera: Clean up scc_mgr_*_delay() args
Zap args which are not used by these functions, in particular
the write_group is often passed, but unused.
Signed-off-by: Marek Vasut <marex@denx.de>
diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index 7eeadc2..066d7f6 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -305,7 +305,7 @@
scc_mgr_set(SCC_MGR_DQS_EN_DELAY_OFFSET, read_group, delay);
}
-static void scc_mgr_set_dqs_io_in_delay(uint32_t write_group, uint32_t delay)
+static void scc_mgr_set_dqs_io_in_delay(uint32_t delay)
{
scc_mgr_set(SCC_MGR_IO_IN_DELAY_OFFSET, RW_MGR_MEM_DQ_PER_WRITE_DQS,
delay);
@@ -321,8 +321,7 @@
scc_mgr_set(SCC_MGR_IO_OUT1_DELAY_OFFSET, dq_in_group, delay);
}
-static void scc_mgr_set_dqs_out1_delay(uint32_t write_group,
- uint32_t delay)
+static void scc_mgr_set_dqs_out1_delay(uint32_t delay)
{
scc_mgr_set(SCC_MGR_IO_OUT1_DELAY_OFFSET, RW_MGR_MEM_DQ_PER_WRITE_DQS,
delay);
@@ -589,9 +588,9 @@
/* zero all DQS io settings */
if (!out_only)
- scc_mgr_set_dqs_io_in_delay(write_group, 0);
+ scc_mgr_set_dqs_io_in_delay(0);
/* av/cv don't have out2 */
- scc_mgr_set_dqs_out1_delay(write_group, IO_DQS_OUT_RESERVE);
+ scc_mgr_set_dqs_out1_delay(IO_DQS_OUT_RESERVE);
scc_mgr_set_oct_out1_delay(write_group, IO_DQS_OUT_RESERVE);
scc_mgr_load_dqs_for_write_group(write_group);
@@ -607,8 +606,7 @@
* apply and load a particular input delay for the DQ pins in a group
* group_bgn is the index of the first dq pin (in the write group)
*/
-static void scc_mgr_apply_group_dq_in_delay(uint32_t write_group,
- uint32_t group_bgn, uint32_t delay)
+static void scc_mgr_apply_group_dq_in_delay(uint32_t group_bgn, uint32_t delay)
{
uint32_t i, p;
@@ -635,8 +633,7 @@
}
/* apply and load a particular output delay for the DM pins in a group */
-static void scc_mgr_apply_group_dm_out1_delay(uint32_t write_group,
- uint32_t delay1)
+static void scc_mgr_apply_group_dm_out1_delay(uint32_t delay1)
{
uint32_t i;
@@ -651,7 +648,7 @@
static void scc_mgr_apply_group_dqs_io_and_oct_out1(uint32_t write_group,
uint32_t delay)
{
- scc_mgr_set_dqs_out1_delay(write_group, delay);
+ scc_mgr_set_dqs_out1_delay(delay);
scc_mgr_load_dqs_io();
scc_mgr_set_oct_out1_delay(write_group, delay);
@@ -709,7 +706,7 @@
write_group, group_bgn, delay, new_delay,
IO_IO_OUT2_DELAY_MAX, IO_IO_OUT2_DELAY_MAX,
new_delay - IO_IO_OUT2_DELAY_MAX);
- scc_mgr_set_dqs_out1_delay(write_group, new_delay -
+ scc_mgr_set_dqs_out1_delay(new_delay -
IO_IO_OUT2_DELAY_MAX);
new_delay = IO_IO_OUT2_DELAY_MAX;
}
@@ -1805,8 +1802,7 @@
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
r += NUM_RANKS_PER_SHADOW_REG) {
- for (i = 0, p = test_bgn, d = 0; i < RW_MGR_MEM_DQ_PER_READ_DQS;
- i++, p++, d += delay_step) {
+ for (i = 0, p = test_bgn, d = 0; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++, p++, d += delay_step) {
debug_cond(DLEVEL == 1, "%s:%d rw_mgr_mem_calibrate_\
vfifo_find_dqs_", __func__, __LINE__);
debug_cond(DLEVEL == 1, "en_phase_sweep_dq_in_delay: g=%u/%u ",
@@ -1932,7 +1928,7 @@
}
/* Reset DQ delay chains to 0 */
- scc_mgr_apply_group_dq_in_delay(write_group, test_bgn, 0);
+ scc_mgr_apply_group_dq_in_delay(test_bgn, 0);
sticky_bit_chk = 0;
for (i = RW_MGR_MEM_DQ_PER_READ_DQS - 1;; i--) {
debug_cond(DLEVEL == 2, "%s:%d vfifo_center: left_edge[%u]: \
@@ -2751,7 +2747,7 @@
}
/* Reset DQ delay chains to 0 */
- scc_mgr_apply_group_dq_out1_delay(write_group, 0);
+ scc_mgr_apply_group_dq_out1_delay(0);
sticky_bit_chk = 0;
for (i = RW_MGR_MEM_DQ_PER_WRITE_DQS - 1;; i--) {
debug_cond(DLEVEL == 2, "%s:%d write_center: left_edge[%u]: \
@@ -2975,7 +2971,7 @@
/* Search for the/part of the window with DM shift */
for (d = IO_IO_OUT1_DELAY_MAX; d >= 0; d -= DELTA_D) {
- scc_mgr_apply_group_dm_out1_delay(write_group, d);
+ scc_mgr_apply_group_dm_out1_delay(d);
writel(0, &sdr_scc_mgr->update);
if (rw_mgr_mem_calibrate_write_test(rank_bgn, write_group, 1,
@@ -3008,7 +3004,7 @@
/* Reset DM delay chains to 0 */
- scc_mgr_apply_group_dm_out1_delay(write_group, 0);
+ scc_mgr_apply_group_dm_out1_delay(0);
/*
* Check to see if the current window nudges up aganist 0 delay.
@@ -3090,7 +3086,7 @@
else
dm_margin = left_edge[0] - mid;
- scc_mgr_apply_group_dm_out1_delay(write_group, mid);
+ scc_mgr_apply_group_dm_out1_delay(mid);
writel(0, &sdr_scc_mgr->update);
debug_cond(DLEVEL == 2, "%s:%d dm_calib: left=%d right=%d mid=%d \