diff --git a/board/gumstix/pepper/Makefile b/board/gumstix/pepper/Makefile
new file mode 100644
index 0000000..ecb1d61
--- /dev/null
+++ b/board/gumstix/pepper/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile
+#
+# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y	+= mux.o
+endif
+
+obj-y	+= board.o
diff --git a/board/gumstix/pepper/board.c b/board/gumstix/pepper/board.c
new file mode 100644
index 0000000..75aac49
--- /dev/null
+++ b/board/gumstix/pepper/board.c
@@ -0,0 +1,226 @@
+/*
+ * Board functions for Gumstix Pepper and AM335x-based boards
+ *
+ * Copyright (C) 2014, Gumstix, Incorporated - http://www.gumstix.com/
+ * Based on board/ti/am335x/board.c from Texas Instruments, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include <power/tps65217.h>
+#include <environment.h>
+#include <watchdog.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SPL_BUILD
+static const struct ddr_data ddr2_data = {
+	.datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
+			  (MT47H128M16RT25E_RD_DQS<<20) |
+			  (MT47H128M16RT25E_RD_DQS<<10) |
+			  (MT47H128M16RT25E_RD_DQS<<0)),
+	.datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) |
+			  (MT47H128M16RT25E_WR_DQS<<20) |
+			  (MT47H128M16RT25E_WR_DQS<<10) |
+			  (MT47H128M16RT25E_WR_DQS<<0)),
+	.datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) |
+			 (MT47H128M16RT25E_PHY_WRLVL<<20) |
+			 (MT47H128M16RT25E_PHY_WRLVL<<10) |
+			 (MT47H128M16RT25E_PHY_WRLVL<<0)),
+	.datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) |
+			 (MT47H128M16RT25E_PHY_GATELVL<<20) |
+			 (MT47H128M16RT25E_PHY_GATELVL<<10) |
+			 (MT47H128M16RT25E_PHY_GATELVL<<0)),
+	.datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) |
+			  (MT47H128M16RT25E_PHY_FIFO_WE<<20) |
+			  (MT47H128M16RT25E_PHY_FIFO_WE<<10) |
+			  (MT47H128M16RT25E_PHY_FIFO_WE<<0)),
+	.datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) |
+			  (MT47H128M16RT25E_PHY_WR_DATA<<20) |
+			  (MT47H128M16RT25E_PHY_WR_DATA<<10) |
+			  (MT47H128M16RT25E_PHY_WR_DATA<<0)),
+};
+
+static const struct cmd_control ddr2_cmd_ctrl_data = {
+	.cmd0csratio = MT47H128M16RT25E_RATIO,
+	.cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+
+	.cmd1csratio = MT47H128M16RT25E_RATIO,
+	.cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+
+	.cmd2csratio = MT47H128M16RT25E_RATIO,
+	.cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+};
+
+static const struct emif_regs ddr2_emif_reg_data = {
+	.sdram_config = MT47H128M16RT25E_EMIF_SDCFG,
+	.ref_ctrl = MT47H128M16RT25E_EMIF_SDREF,
+	.sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1,
+	.sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2,
+	.sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3,
+	.emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY,
+};
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+	/* break into full u-boot on 'c' */
+	return serial_tstc() && serial_getc() == 'c';
+}
+#endif
+
+#define OSC	(V_OSCK/1000000)
+const struct dpll_params dpll_ddr = {266, OSC-1, 1, -1, -1, -1, -1};
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+	return &dpll_ddr;
+}
+
+void set_uart_mux_conf(void)
+{
+	enable_uart0_pin_mux();
+}
+
+void set_mux_conf_regs(void)
+{
+	enable_board_pin_mux();
+}
+
+const struct ctrl_ioregs ioregs = {
+	.cm0ioctl		= MT47H128M16RT25E_IOCTRL_VALUE,
+	.cm1ioctl		= MT47H128M16RT25E_IOCTRL_VALUE,
+	.cm2ioctl		= MT47H128M16RT25E_IOCTRL_VALUE,
+	.dt0ioctl		= MT47H128M16RT25E_IOCTRL_VALUE,
+	.dt1ioctl		= MT47H128M16RT25E_IOCTRL_VALUE,
+};
+
+void sdram_init(void)
+{
+	config_ddr(266, &ioregs, &ddr2_data,
+		   &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0);
+}
+#endif
+
+int board_init(void)
+{
+#if defined(CONFIG_HW_WATCHDOG)
+	hw_watchdog_init();
+#endif
+
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	gpmc_init();
+
+	return 0;
+}
+
+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
+	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+static void cpsw_control(int enabled)
+{
+	/* VTP can be added here */
+
+	return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+	{
+		.slave_reg_ofs	= 0x208,
+		.sliver_reg_ofs	= 0xd80,
+		.phy_addr	= 0,
+		.phy_if		= PHY_INTERFACE_MODE_RGMII,
+	},
+};
+
+static struct cpsw_platform_data cpsw_data = {
+	.mdio_base		= CPSW_MDIO_BASE,
+	.cpsw_base		= CPSW_BASE,
+	.mdio_div		= 0xff,
+	.channels		= 8,
+	.cpdma_reg_ofs		= 0x800,
+	.slaves			= 1,
+	.slave_data		= cpsw_slaves,
+	.ale_reg_ofs		= 0xd00,
+	.ale_entries		= 1024,
+	.host_port_reg_ofs	= 0x108,
+	.hw_stats_reg_ofs	= 0x900,
+	.bd_ram_ofs		= 0x2000,
+	.mac_control		= (1 << 5),
+	.control		= cpsw_control,
+	.host_port_num		= 0,
+	.version		= CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+	int rv, n = 0;
+	uint8_t mac_addr[6];
+	uint32_t mac_hi, mac_lo;
+	const char *devname;
+
+	if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+		/* try reading mac address from efuse */
+		mac_lo = readl(&cdev->macid0l);
+		mac_hi = readl(&cdev->macid0h);
+		mac_addr[0] = mac_hi & 0xFF;
+		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+		mac_addr[4] = mac_lo & 0xFF;
+		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+		if (is_valid_ether_addr(mac_addr))
+			eth_setenv_enetaddr("ethaddr", mac_addr);
+	}
+
+	writel((RGMII_MODE_ENABLE | RGMII_INT_DELAY), &cdev->miisel);
+
+	rv = cpsw_register(&cpsw_data);
+	if (rv < 0)
+		printf("Error %d registering CPSW switch\n", rv);
+	else
+		n += rv;
+
+	/*
+	 *
+	 * CPSW RGMII Internal Delay Mode is not supported in all PVT
+	 * operating points.  So we must set the TX clock delay feature
+	 * in the KSZ9021 PHY.  Since we only support a single ethernet
+	 * device in U-Boot, we only do this for the current instance.
+	 */
+	devname = miiphy_get_current_dev();
+	/* max rx/tx clock delay, min rx/tx control delay */
+	miiphy_write(devname, 0x0, 0x0b, 0x8104);
+	miiphy_write(devname, 0x0, 0xc, 0xa0a0);
+
+	/* min rx data delay */
+	miiphy_write(devname, 0x0, 0x0b, 0x8105);
+	miiphy_write(devname, 0x0, 0x0c, 0x0000);
+
+	/* min tx data delay */
+	miiphy_write(devname, 0x0, 0x0b, 0x8106);
+	miiphy_write(devname, 0x0, 0x0c, 0x0000);
+
+	return n;
+}
+#endif
diff --git a/board/gumstix/pepper/board.h b/board/gumstix/pepper/board.h
new file mode 100644
index 0000000..0512735
--- /dev/null
+++ b/board/gumstix/pepper/board.h
@@ -0,0 +1,19 @@
+/*
+ * Gumstix Pepper and AM335x-based boards information header
+ *
+ * Copyright (C) 2014, Gumstix, Inc. - http://www.gumstix.com/
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * We must be able to enable uart0, for initial output. We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_board_pin_mux(void);
+#endif
diff --git a/board/gumstix/pepper/mux.c b/board/gumstix/pepper/mux.c
new file mode 100644
index 0000000..50b1266
--- /dev/null
+++ b/board/gumstix/pepper/mux.c
@@ -0,0 +1,78 @@
+/*
+ * Muxing for Gumstix Pepper and AM335x-based boards
+ *
+ * Copyright (C) 2014, Gumstix, Incorporated - http://www.gumstix.com/
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include "board.h"
+
+static struct module_pin_mux uart0_pin_mux[] = {
+	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},  /* UART0_RXD */
+	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},              /* UART0_TXD */
+	{-1},
+};
+
+static struct module_pin_mux mmc0_pin_mux[] = {
+	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_DAT3 */
+	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_DAT2 */
+	{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_DAT1 */
+	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_DAT0 */
+	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},   /* MMC0_CLK */
+	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},   /* MMC0_CMD */
+	{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)},   /* MMC0_CD */
+	{-1},
+};
+
+static struct module_pin_mux i2c0_pin_mux[] = {
+	/* I2C_DATA */
+	{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+	/* I2C_SCLK */
+	{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+	{-1},
+};
+
+static struct module_pin_mux rgmii1_pin_mux[] = {
+	{OFFSET(mii1_txen), MODE(2)},                   /* RGMII1_TCTL */
+	{OFFSET(mii1_rxdv), MODE(2) | RXACTIVE},        /* RGMII1_RCTL */
+	{OFFSET(mii1_txd3), MODE(2)},                   /* RGMII1_TD3 */
+	{OFFSET(mii1_txd2), MODE(2)},                   /* RGMII1_TD2 */
+	{OFFSET(mii1_txd1), MODE(2)},                   /* RGMII1_TD1 */
+	{OFFSET(mii1_txd0), MODE(2)},                   /* RGMII1_TD0 */
+	{OFFSET(mii1_txclk), MODE(2)},                  /* RGMII1_TCLK */
+	{OFFSET(mii1_rxclk), MODE(2) | RXACTIVE},       /* RGMII1_RCLK */
+	{OFFSET(mii1_rxd3), MODE(2) | RXACTIVE},        /* RGMII1_RD3 */
+	{OFFSET(mii1_rxd2), MODE(2) | RXACTIVE},        /* RGMII1_RD2 */
+	{OFFSET(mii1_rxd1), MODE(2) | RXACTIVE},        /* RGMII1_RD1 */
+	{OFFSET(mii1_rxd0), MODE(2) | RXACTIVE},        /* RGMII1_RD0 */
+	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
+	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},        /* MDIO_CLK */
+	{OFFSET(rmii1_refclk), MODE(7) | RXACTIVE},     /* ETH_INT */
+	{OFFSET(mii1_col), MODE(7) | PULLUP_EN},        /* PHY_NRESET */
+	{OFFSET(xdma_event_intr1), MODE(3)},
+	{-1},
+};
+
+void enable_uart0_pin_mux(void)
+{
+	configure_module_pin_mux(uart0_pin_mux);
+}
+
+/*
+ * Do board-specific muxes.
+ */
+void enable_board_pin_mux(void)
+{
+	/* I2C0 */
+	configure_module_pin_mux(i2c0_pin_mux);
+	/* SD Card */
+	configure_module_pin_mux(mmc0_pin_mux);
+	/* Ethernet pinmux. */
+	configure_module_pin_mux(rgmii1_pin_mux);
+}
diff --git a/boards.cfg b/boards.cfg
index 3681339..8aaf749 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -257,6 +257,7 @@
 Active  arm         armv7          am33xx      BuR             tseries             tseries_nand                         tseries:SERIAL1,CONS_INDEX=1,NAND                                                                                                 Hannes Petermaier <hannes.petermaier@br-automation.com>
 Active  arm         armv7          am33xx      BuR             tseries             tseries_spi                          tseries:SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT                                                                                   Hannes Petermaier <hannes.petermaier@br-automation.com>
 Active  arm         armv7          am33xx      compulab        cm_t335             cm_t335                              -                                                                                                                                 Igor Grinberg <grinberg@compulab.co.il>
+Active  arm         armv7          am33xx      gumstix         pepper              pepper                               -                                                                                                                                 Ash Charles <ash@gumstix.com>
 Active  arm         armv7          am33xx      isee            igep0033            am335x_igep0033                      -                                                                                                                                 Enric Balletbo i Serra <eballetbo@iseebcn.com>
 Active  arm         armv7          am33xx      phytec          pcm051              pcm051_rev1                          pcm051:REV1                                                                                                                       Lars Poeschel <poeschel@lemonage.de>
 Active  arm         armv7          am33xx      phytec          pcm051              pcm051_rev3                          pcm051:REV3                                                                                                                       Lars Poeschel <poeschel@lemonage.de>
diff --git a/include/configs/pepper.h b/include/configs/pepper.h
new file mode 100644
index 0000000..cc153ab
--- /dev/null
+++ b/include/configs/pepper.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2013 Gumstix, Inc. - http://www.gumstix.com/
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __CONFIG_PEPPER_H
+#define __CONFIG_PEPPER_H
+
+#define CONFIG_MMC
+#include <configs/ti_am335x_common.h>
+
+#undef CONFIG_BOARD_LATE_INIT
+#undef CONFIG_SPL_OS_BOOT
+
+/* Clock defines */
+#define V_OSCK				24000000  /* Clock output from T2 */
+#define V_SCLK				(V_OSCK)
+
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT		"pepper# "
+
+/* Mach type */
+#define MACH_TYPE_PEPPER		4207	/* Until the next sync */
+#define CONFIG_MACH_TYPE		MACH_TYPE_PEPPER
+
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
+#define CONFIG_ENV_IS_NOWHERE
+/* Display cpuinfo */
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	DEFAULT_LINUX_BOOT_ENV \
+	"bootdir=/boot\0" \
+	"bootfile=zImage\0" \
+	"fdtfile=am335x-pepper.dtb\0" \
+	"console=ttyO0,115200n8\0" \
+	"optargs=\0" \
+	"mmcdev=0\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"mmcrootfstype=ext3 rootwait\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"bootenv=uEnv.txt\0" \
+	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+	"importbootenv=echo Importing environment from mmc ...; " \
+		"env import -t ${loadaddr} ${filesize}\0" \
+	"mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \
+		"load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+	"loaduimage=fatload mmc ${mmcdev}:1 ${loadaddr} uImage\0" \
+	"uimageboot=echo Booting from mmc${mmcdev} ...; " \
+		"run mmcargs; " \
+		"bootm ${loadaddr}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"bootz ${loadaddr} - ${fdtaddr}\0" \
+	"ubiboot=echo Booting from nand (ubifs) ...; " \
+		"run ubiargs; run ubiload; " \
+		"bootz ${loadaddr} - ${fdtaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
+		"echo SD/MMC found on device ${mmcdev};" \
+		"if run loadbootenv; then " \
+			"echo Loaded environment from ${bootenv};" \
+			"run importbootenv;" \
+		"fi;" \
+		"if test -n $uenvcmd; then " \
+			"echo Running uenvcmd ...;" \
+			"run uenvcmd;" \
+		"fi;" \
+		"if run mmcload; then " \
+			"run mmcboot;" \
+		"fi;" \
+		"if run loaduimage; then " \
+			"run uimageboot;" \
+		"fi;" \
+	"fi;" \
+
+/* Serial console configuration */
+#define CONFIG_CONS_INDEX		1 /* UART0 */
+#define CONFIG_SERIAL1			1
+#define CONFIG_SYS_NS16550_COM1		0x44e09000
+
+/* Ethernet support */
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ADDR			0
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021
+#define CONFIG_PHY_RESET_DELAY 1000
+
+/* SPL */
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"
+
+#endif /* __CONFIG_PEPPER_H */