ARM: zynq: Add support for the topic-miami system-on-modules and carrier boards
The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM,
32MB QSPI NOR flash and 256MB NAND flash.
The topic-miamiplus SoMs contain a Zynq xc7z035, xc7z045 or xc7z100 SoC,
2x 1GB DDR3L RAM, 64MB dual-parallel QSPI flash, clock sources
and a fan controller.
The "Florida" carrier boards add SD, USB, ethernet and other interfaces.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig
new file mode 100644
index 0000000..3d6161e
--- /dev/null
+++ b/configs/topic_miami_defconfig
@@ -0,0 +1,49 @@
+CONFIG_ARM=y
+CONFIG_SYS_VENDOR="topic"
+CONFIG_SYS_CONFIG_NAME="topic_miami"
+CONFIG_ARCH_ZYNQ=y
+CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miami/ps7_regs.txt"
+CONFIG_DEFAULT_DEVICE_TREE="zynq-topic-miami"
+CONFIG_BOOTDELAY=0
+CONFIG_SYS_NO_FLASH=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="zynq-uboot> "
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_EMBED=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_ZYNQ_SDHCI=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+# CONFIG_NETDEVICES is not set
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ZYNQ=y
+CONFIG_DEBUG_UART_BASE=0xe0000000
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_ZYNQ_QSPI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Xilinx"
+CONFIG_G_DNL_VENDOR_NUM=0x03fd
+CONFIG_G_DNL_PRODUCT_NUM=0x0300
diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig
new file mode 100644
index 0000000..3160f00
--- /dev/null
+++ b/configs/topic_miamiplus_defconfig
@@ -0,0 +1,49 @@
+CONFIG_ARM=y
+CONFIG_SYS_VENDOR="topic"
+CONFIG_SYS_CONFIG_NAME="topic_miamiplus"
+CONFIG_ARCH_ZYNQ=y
+CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt"
+CONFIG_DEFAULT_DEVICE_TREE="zynq-topic-miamiplus"
+CONFIG_BOOTDELAY=0
+CONFIG_SYS_NO_FLASH=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="zynq-uboot> "
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_EMBED=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_ZYNQ_SDHCI=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+# CONFIG_NETDEVICES is not set
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ZYNQ=y
+CONFIG_DEBUG_UART_BASE=0xe0000000
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_ZYNQ_QSPI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Xilinx"
+CONFIG_G_DNL_VENDOR_NUM=0x03fd
+CONFIG_G_DNL_PRODUCT_NUM=0x0300