mpc8641: Fix error in README
I made some updates to the code that didn't make it into the
README - fix this
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn
index 5ac39e6..d8fe0a4 100644
--- a/doc/README.mpc8641hpcn
+++ b/doc/README.mpc8641hpcn
@@ -134,15 +134,15 @@
However, the physical map is altered to reside in 36-bit space, as follows.
Addresses are no longer mapped with VA == PA. All accesses from
software use the VA; the PA is only used for setting up windows
-and mappings. Note that the low 32 bits are the same as the VA above;
-only the top 4 bits vary:
+and mappings. Note that with the exception of PCI MEM and RIO, the low
+ 32 bits are the same as the VA above; only the top 4 bits vary:
Memory Range Device Size
------------ ------ ----
0x0_0000_0000 0x0_7fff_ffff DDR 2G
- 0xc_8000_0000 0xc_9fff_ffff RIO MEM 512M
- 0xc_8000_0000 0xc_9fff_ffff PCI1/PEX1 MEM 512M
- 0xc_a000_0000 0xc_bfff_ffff PCI2/PEX2 MEM 512M
+ 0xc_0000_0000 0xc_1fff_ffff RIO MEM 512M
+ 0xc_0000_0000 0xc_1fff_ffff PCI1/PEX1 MEM 512M
+ 0xc_2000_0000 0xc_3fff_ffff PCI2/PEX2 MEM 512M
0xf_ffe0_0000 0xf_ffef_ffff CCSR 1M
0xf_ffdf_0000 0xf_ffdf_7fff PIXIS 8K
0xf_ffdf_8000 0xf_ffdf_ffff CF 8K