drivers/usb: regorganisation
move to linux usb driver organisation
as following
drivers/usb/gadget
drivers/usb/host
drivers/usb/musb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
diff --git a/drivers/usb/gadget/ep0.c b/drivers/usb/gadget/ep0.c
new file mode 100644
index 0000000..2b4ec44
--- /dev/null
+++ b/drivers/usb/gadget/ep0.c
@@ -0,0 +1,597 @@
+/*
+ * (C) Copyright 2003
+ * Gerry Hamel, geh@ti.com, Texas Instruments
+ *
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, deckard@CodeHermit.ie
+ *
+ * Based on
+ * linux/drivers/usbd/ep0.c
+ *
+ * Copyright (c) 2000, 2001, 2002 Lineo
+ * Copyright (c) 2001 Hewlett Packard
+ *
+ * By:
+ * Stuart Lynne <sl@lineo.com>,
+ * Tom Rushworth <tbr@lineo.com>,
+ * Bruce Balden <balden@lineo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * This is the builtin ep0 control function. It implements all required functionality
+ * for responding to control requests (SETUP packets).
+ *
+ * XXX
+ *
+ * Currently we do not pass any SETUP packets (or other) to the configured
+ * function driver. This may need to change.
+ *
+ * XXX
+ *
+ * As alluded to above, a simple callback cdc_recv_setup has been implemented
+ * in the usb_device data structure to facilicate passing
+ * Common Device Class packets to a function driver.
+ *
+ * XXX
+ */
+
+#include <common.h>
+#include <usbdevice.h>
+
+#if 0
+#define dbg_ep0(lvl,fmt,args...) serial_printf("[%s] %s:%d: "fmt"\n",__FILE__,__FUNCTION__,__LINE__,##args)
+#else
+#define dbg_ep0(lvl,fmt,args...)
+#endif
+
+/* EP0 Configuration Set ********************************************************************* */
+
+
+/**
+ * ep0_get_status - fill in URB data with appropriate status
+ * @device:
+ * @urb:
+ * @index:
+ * @requesttype:
+ *
+ */
+static int ep0_get_status (struct usb_device_instance *device,
+ struct urb *urb, int index, int requesttype)
+{
+ char *cp;
+
+ urb->actual_length = 2;
+ cp = (char*)urb->buffer;
+ cp[0] = cp[1] = 0;
+
+ switch (requesttype) {
+ case USB_REQ_RECIPIENT_DEVICE:
+ cp[0] = USB_STATUS_SELFPOWERED;
+ break;
+ case USB_REQ_RECIPIENT_INTERFACE:
+ break;
+ case USB_REQ_RECIPIENT_ENDPOINT:
+ cp[0] = usbd_endpoint_halted (device, index);
+ break;
+ case USB_REQ_RECIPIENT_OTHER:
+ urb->actual_length = 0;
+ default:
+ break;
+ }
+ dbg_ep0 (2, "%02x %02x", cp[0], cp[1]);
+ return 0;
+}
+
+/**
+ * ep0_get_one
+ * @device:
+ * @urb:
+ * @result:
+ *
+ * Set a single byte value in the urb send buffer. Return non-zero to signal
+ * a request error.
+ */
+static int ep0_get_one (struct usb_device_instance *device, struct urb *urb,
+ __u8 result)
+{
+ urb->actual_length = 1; /* XXX 2? */
+ ((char *) urb->buffer)[0] = result;
+ return 0;
+}
+
+/**
+ * copy_config
+ * @urb: pointer to urb
+ * @data: pointer to configuration data
+ * @length: length of data
+ *
+ * Copy configuration data to urb transfer buffer if there is room for it.
+ */
+void copy_config (struct urb *urb, void *data, int max_length,
+ int max_buf)
+{
+ int available;
+ int length;
+
+ /*dbg_ep0(3, "-> actual: %d buf: %d max_buf: %d max_length: %d data: %p", */
+ /* urb->actual_length, urb->buffer_length, max_buf, max_length, data); */
+
+ if (!data) {
+ dbg_ep0 (1, "data is NULL");
+ return;
+ }
+ length = max_length;
+
+ if (length > max_length) {
+ dbg_ep0 (1, "length: %d >= max_length: %d", length,
+ max_length);
+ return;
+ }
+ /*dbg_ep0(1, " actual: %d buf: %d max_buf: %d max_length: %d length: %d", */
+ /* urb->actual_length, urb->buffer_length, max_buf, max_length, length); */
+
+ if ((available =
+ /*urb->buffer_length */ max_buf - urb->actual_length) <= 0) {
+ return;
+ }
+ /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
+ /* urb->actual_length, urb->buffer_length, max_buf, length, available); */
+
+ if (length > available) {
+ length = available;
+ }
+ /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
+ /* urb->actual_length, urb->buffer_length, max_buf, length, available); */
+
+ memcpy (urb->buffer + urb->actual_length, data, length);
+ urb->actual_length += length;
+
+ dbg_ep0 (3,
+ "copy_config: <- actual: %d buf: %d max_buf: %d max_length: %d available: %d",
+ urb->actual_length, urb->buffer_length, max_buf, max_length,
+ available);
+}
+
+/**
+ * ep0_get_descriptor
+ * @device:
+ * @urb:
+ * @max:
+ * @descriptor_type:
+ * @index:
+ *
+ * Called by ep0_rx_process for a get descriptor device command. Determine what
+ * descriptor is being requested, copy to send buffer. Return zero if ok to send,
+ * return non-zero to signal a request error.
+ */
+static int ep0_get_descriptor (struct usb_device_instance *device,
+ struct urb *urb, int max, int descriptor_type,
+ int index)
+{
+ int port = 0; /* XXX compound device */
+ char *cp;
+
+ /*dbg_ep0(3, "max: %x type: %x index: %x", max, descriptor_type, index); */
+
+ if (!urb || !urb->buffer || !urb->buffer_length
+ || (urb->buffer_length < 255)) {
+ dbg_ep0 (2, "invalid urb %p", urb);
+ return -1L;
+ }
+
+ /* setup tx urb */
+ urb->actual_length = 0;
+ cp = (char*)urb->buffer;
+
+ dbg_ep0 (2, "%s", USBD_DEVICE_DESCRIPTORS (descriptor_type));
+
+ switch (descriptor_type) {
+ case USB_DESCRIPTOR_TYPE_DEVICE:
+ {
+ struct usb_device_descriptor *device_descriptor;
+ if (!
+ (device_descriptor =
+ usbd_device_device_descriptor (device, port))) {
+ return -1;
+ }
+ /* copy descriptor for this device */
+ copy_config (urb, device_descriptor,
+ sizeof (struct usb_device_descriptor),
+ max);
+
+ /* correct the correct control endpoint 0 max packet size into the descriptor */
+ device_descriptor =
+ (struct usb_device_descriptor *) urb->buffer;
+
+ }
+ dbg_ep0(3, "copied device configuration, actual_length: 0x%x", urb->actual_length);
+ break;
+
+ case USB_DESCRIPTOR_TYPE_CONFIGURATION:
+ {
+ struct usb_configuration_descriptor
+ *configuration_descriptor;
+ struct usb_device_descriptor *device_descriptor;
+ if (!
+ (device_descriptor =
+ usbd_device_device_descriptor (device, port))) {
+ return -1;
+ }
+ /*dbg_ep0(2, "%d %d", index, device_descriptor->bNumConfigurations); */
+ if (index >= device_descriptor->bNumConfigurations) {
+ dbg_ep0 (0, "index too large: %d >= %d", index,
+ device_descriptor->
+ bNumConfigurations);
+ return -1;
+ }
+
+ if (!
+ (configuration_descriptor =
+ usbd_device_configuration_descriptor (device,
+ port,
+ index))) {
+ dbg_ep0 (0,
+ "usbd_device_configuration_descriptor failed: %d",
+ index);
+ return -1;
+ }
+ dbg_ep0(0, "attempt to copy %d bytes to urb\n",cpu_to_le16(configuration_descriptor->wTotalLength));
+ copy_config (urb, configuration_descriptor,
+
+ cpu_to_le16(configuration_descriptor->wTotalLength),
+ max);
+ }
+
+ break;
+
+ case USB_DESCRIPTOR_TYPE_STRING:
+ {
+ struct usb_string_descriptor *string_descriptor;
+ if (!(string_descriptor = usbd_get_string (index))) {
+ serial_printf("Invalid string index %d\n", index);
+ return -1;
+ }
+ dbg_ep0(3, "string_descriptor: %p length %d", string_descriptor, string_descriptor->bLength);
+ copy_config (urb, string_descriptor, string_descriptor->bLength, max);
+ }
+ break;
+ case USB_DESCRIPTOR_TYPE_INTERFACE:
+ serial_printf("USB_DESCRIPTOR_TYPE_INTERFACE - error not implemented\n");
+ return -1;
+ case USB_DESCRIPTOR_TYPE_ENDPOINT:
+ serial_printf("USB_DESCRIPTOR_TYPE_ENDPOINT - error not implemented\n");
+ return -1;
+ case USB_DESCRIPTOR_TYPE_HID:
+ {
+ serial_printf("USB_DESCRIPTOR_TYPE_HID - error not implemented\n");
+ return -1; /* unsupported at this time */
+#if 0
+ int bNumInterface =
+ le16_to_cpu (urb->device_request.wIndex);
+ int bAlternateSetting = 0;
+ int class = 0;
+ struct usb_class_descriptor *class_descriptor;
+
+ if (!(class_descriptor =
+ usbd_device_class_descriptor_index (device,
+ port, 0,
+ bNumInterface,
+ bAlternateSetting,
+ class))
+ || class_descriptor->descriptor.hid.bDescriptorType != USB_DT_HID) {
+ dbg_ep0 (3, "[%d] interface is not HID",
+ bNumInterface);
+ return -1;
+ }
+ /* copy descriptor for this class */
+ copy_config (urb, class_descriptor,
+ class_descriptor->descriptor.hid.bLength,
+ max);
+#endif
+ }
+ break;
+ case USB_DESCRIPTOR_TYPE_REPORT:
+ {
+ serial_printf("USB_DESCRIPTOR_TYPE_REPORT - error not implemented\n");
+ return -1; /* unsupported at this time */
+#if 0
+ int bNumInterface =
+ le16_to_cpu (urb->device_request.wIndex);
+ int bAlternateSetting = 0;
+ int class = 0;
+ struct usb_class_report_descriptor *report_descriptor;
+
+ if (!(report_descriptor =
+ usbd_device_class_report_descriptor_index
+ (device, port, 0, bNumInterface,
+ bAlternateSetting, class))
+ || report_descriptor->bDescriptorType !=
+ USB_DT_REPORT) {
+ dbg_ep0 (3, "[%d] descriptor is not REPORT",
+ bNumInterface);
+ return -1;
+ }
+ /* copy report descriptor for this class */
+ /*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */
+ if (max - urb->actual_length > 0) {
+ int length =
+ MIN (report_descriptor->wLength,
+ max - urb->actual_length);
+ memcpy (urb->buffer + urb->actual_length,
+ &report_descriptor->bData[0], length);
+ urb->actual_length += length;
+ }
+#endif
+ }
+ break;
+ case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
+ {
+ /* If a USB device supports both a full speed and low speed operation
+ * we must send a Device_Qualifier descriptor here
+ */
+ return -1;
+ }
+ default:
+ return -1;
+ }
+
+
+ dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d tx_packetSize: %2d",
+ urb->buffer, urb->buffer_length, urb->actual_length,
+ device->bus->endpoint_array[0].tx_packetSize);
+/*
+ if ((urb->actual_length < max) && !(urb->actual_length % device->bus->endpoint_array[0].tx_packetSize)) {
+ dbg_ep0(0, "adding null byte");
+ urb->buffer[urb->actual_length++] = 0;
+ dbg_ep0(0, "urb: buffer_length: %2d actual_length: %2d packet size: %2d",
+ urb->buffer_length, urb->actual_length device->bus->endpoint_array[0].tx_packetSize);
+ }
+*/
+ return 0;
+
+}
+
+/**
+ * ep0_recv_setup - called to indicate URB has been received
+ * @urb: pointer to struct urb
+ *
+ * Check if this is a setup packet, process the device request, put results
+ * back into the urb and return zero or non-zero to indicate success (DATA)
+ * or failure (STALL).
+ *
+ */
+int ep0_recv_setup (struct urb *urb)
+{
+ /*struct usb_device_request *request = urb->buffer; */
+ /*struct usb_device_instance *device = urb->device; */
+
+ struct usb_device_request *request;
+ struct usb_device_instance *device;
+ int address;
+
+ dbg_ep0 (0, "entering ep0_recv_setup()");
+ if (!urb || !urb->device) {
+ dbg_ep0 (3, "invalid URB %p", urb);
+ return -1;
+ }
+
+ request = &urb->device_request;
+ device = urb->device;
+
+ dbg_ep0 (3, "urb: %p device: %p", urb, urb->device);
+
+
+ /*dbg_ep0(2, "- - - - - - - - - -"); */
+
+ dbg_ep0 (2,
+ "bmRequestType:%02x bRequest:%02x wValue:%04x wIndex:%04x wLength:%04x %s",
+ request->bmRequestType, request->bRequest,
+ le16_to_cpu (request->wValue), le16_to_cpu (request->wIndex),
+ le16_to_cpu (request->wLength),
+ USBD_DEVICE_REQUESTS (request->bRequest));
+
+ /* handle USB Standard Request (c.f. USB Spec table 9-2) */
+ if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) {
+ if(device->device_state <= STATE_CONFIGURED){
+ /* Attempt to handle a CDC specific request if we are
+ * in the configured state.
+ */
+ return device->cdc_recv_setup(request,urb);
+ }
+ dbg_ep0 (1, "non standard request: %x",
+ request->bmRequestType & USB_REQ_TYPE_MASK);
+ return -1; /* Stall here */
+ }
+
+ switch (device->device_state) {
+ case STATE_CREATED:
+ case STATE_ATTACHED:
+ case STATE_POWERED:
+ /* It actually is important to allow requests in these states,
+ * Windows will request descriptors before assigning an
+ * address to the client.
+ */
+
+ /*dbg_ep0 (1, "request %s not allowed in this state: %s", */
+ /* USBD_DEVICE_REQUESTS(request->bRequest), */
+ /* usbd_device_states[device->device_state]); */
+ /*return -1; */
+ break;
+
+ case STATE_INIT:
+ case STATE_DEFAULT:
+ switch (request->bRequest) {
+ case USB_REQ_GET_STATUS:
+ case USB_REQ_GET_INTERFACE:
+ case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ case USB_REQ_SET_DESCRIPTOR:
+ /* case USB_REQ_SET_CONFIGURATION: */
+ case USB_REQ_SET_INTERFACE:
+ dbg_ep0 (1,
+ "request %s not allowed in DEFAULT state: %s",
+ USBD_DEVICE_REQUESTS (request->bRequest),
+ usbd_device_states[device->device_state]);
+ return -1;
+
+ case USB_REQ_SET_CONFIGURATION:
+ case USB_REQ_SET_ADDRESS:
+ case USB_REQ_GET_DESCRIPTOR:
+ case USB_REQ_GET_CONFIGURATION:
+ break;
+ }
+ case STATE_ADDRESSED:
+ case STATE_CONFIGURED:
+ break;
+ case STATE_UNKNOWN:
+ dbg_ep0 (1, "request %s not allowed in UNKNOWN state: %s",
+ USBD_DEVICE_REQUESTS (request->bRequest),
+ usbd_device_states[device->device_state]);
+ return -1;
+ }
+
+ /* handle all requests that return data (direction bit set on bm RequestType) */
+ if ((request->bmRequestType & USB_REQ_DIRECTION_MASK)) {
+
+ dbg_ep0 (3, "Device-to-Host");
+
+ switch (request->bRequest) {
+
+ case USB_REQ_GET_STATUS:
+ return ep0_get_status (device, urb, request->wIndex,
+ request->bmRequestType &
+ USB_REQ_RECIPIENT_MASK);
+
+ case USB_REQ_GET_DESCRIPTOR:
+ return ep0_get_descriptor (device, urb,
+ le16_to_cpu (request->wLength),
+ le16_to_cpu (request->wValue) >> 8,
+ le16_to_cpu (request->wValue) & 0xff);
+
+ case USB_REQ_GET_CONFIGURATION:
+ serial_printf("get config %d\n", device->configuration);
+ return ep0_get_one (device, urb,
+ device->configuration);
+
+ case USB_REQ_GET_INTERFACE:
+ return ep0_get_one (device, urb, device->alternate);
+
+ case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
+ return -1;
+
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ case USB_REQ_SET_ADDRESS:
+ case USB_REQ_SET_DESCRIPTOR:
+ case USB_REQ_SET_CONFIGURATION:
+ case USB_REQ_SET_INTERFACE:
+ return -1;
+ }
+ }
+ /* handle the requests that do not return data */
+ else {
+
+
+ /*dbg_ep0(3, "Host-to-Device"); */
+ switch (request->bRequest) {
+
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ dbg_ep0 (0, "Host-to-Device");
+ switch (request->
+ bmRequestType & USB_REQ_RECIPIENT_MASK) {
+ case USB_REQ_RECIPIENT_DEVICE:
+ /* XXX DEVICE_REMOTE_WAKEUP or TEST_MODE would be added here */
+ /* XXX fall through for now as we do not support either */
+ case USB_REQ_RECIPIENT_INTERFACE:
+ case USB_REQ_RECIPIENT_OTHER:
+ dbg_ep0 (0, "request %s not",
+ USBD_DEVICE_REQUESTS (request->bRequest));
+ default:
+ return -1;
+
+ case USB_REQ_RECIPIENT_ENDPOINT:
+ dbg_ep0 (0, "ENDPOINT: %x", le16_to_cpu (request->wValue));
+ if (le16_to_cpu (request->wValue) == USB_ENDPOINT_HALT) {
+ /*return usbd_device_feature (device, le16_to_cpu (request->wIndex), */
+ /* request->bRequest == USB_REQ_SET_FEATURE); */
+ /* NEED TO IMPLEMENT THIS!!! */
+ return -1;
+ } else {
+ dbg_ep0 (1, "request %s bad wValue: %04x",
+ USBD_DEVICE_REQUESTS
+ (request->bRequest),
+ le16_to_cpu (request->wValue));
+ return -1;
+ }
+ }
+
+ case USB_REQ_SET_ADDRESS:
+ /* check if this is a re-address, reset first if it is (this shouldn't be possible) */
+ if (device->device_state != STATE_DEFAULT) {
+ dbg_ep0 (1, "set_address: %02x state: %s",
+ le16_to_cpu (request->wValue),
+ usbd_device_states[device->device_state]);
+ return -1;
+ }
+ address = le16_to_cpu (request->wValue);
+ if ((address & 0x7f) != address) {
+ dbg_ep0 (1, "invalid address %04x %04x",
+ address, address & 0x7f);
+ return -1;
+ }
+ device->address = address;
+
+ /*dbg_ep0(2, "address: %d %d %d", */
+ /* request->wValue, le16_to_cpu(request->wValue), device->address); */
+
+ return 0;
+
+ case USB_REQ_SET_DESCRIPTOR: /* XXX should we support this? */
+ dbg_ep0 (0, "set descriptor: NOT SUPPORTED");
+ return -1;
+
+ case USB_REQ_SET_CONFIGURATION:
+ /* c.f. 9.4.7 - the top half of wValue is reserved */
+ device->configuration = le16_to_cpu(request->wValue) & 0xff;
+
+ /* reset interface and alternate settings */
+ device->interface = device->alternate = 0;
+
+ /*dbg_ep0(2, "set configuration: %d", device->configuration); */
+ /*serial_printf("DEVICE_CONFIGURED.. event?\n"); */
+ return 0;
+
+ case USB_REQ_SET_INTERFACE:
+ device->interface = le16_to_cpu (request->wIndex);
+ device->alternate = le16_to_cpu (request->wValue);
+ /*dbg_ep0(2, "set interface: %d alternate: %d", device->interface, device->alternate); */
+ serial_printf ("DEVICE_SET_INTERFACE.. event?\n");
+ return 0;
+
+ case USB_REQ_GET_STATUS:
+ case USB_REQ_GET_DESCRIPTOR:
+ case USB_REQ_GET_CONFIGURATION:
+ case USB_REQ_GET_INTERFACE:
+ case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
+ return -1;
+ }
+ }
+ return -1;
+}