diff --git a/include/usb/designware_udc.h b/include/usb/designware_udc.h
new file mode 100644
index 0000000..ae98e8c
--- /dev/null
+++ b/include/usb/designware_udc.h
@@ -0,0 +1,230 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __DW_UDC_H
+#define __DW_UDC_H
+
+/*
+ * Defines for  USBD
+ *
+ * The udc_ahb controller has three AHB slaves:
+ *
+ * 1.  THe UDC registers
+ * 2.  The plug detect
+ * 3.  The RX/TX FIFO
+ */
+
+#define MAX_ENDPOINTS		16
+
+struct udc_endp_regs {
+	u32 endp_cntl;
+	u32 endp_status;
+	u32 endp_bsorfn;
+	u32 endp_maxpacksize;
+	u32 reserved_1;
+	u32 endp_desc_point;
+	u32 reserved_2;
+	u32 write_done;
+};
+
+/* Endpoint Control Register definitions */
+
+#define  ENDP_CNTL_STALL		0x00000001
+#define  ENDP_CNTL_FLUSH		0x00000002
+#define  ENDP_CNTL_SNOOP		0x00000004
+#define  ENDP_CNTL_POLL			0x00000008
+#define  ENDP_CNTL_CONTROL		0x00000000
+#define  ENDP_CNTL_ISO			0x00000010
+#define  ENDP_CNTL_BULK			0x00000020
+#define  ENDP_CNTL_INT			0x00000030
+#define  ENDP_CNTL_NAK			0x00000040
+#define  ENDP_CNTL_SNAK			0x00000080
+#define  ENDP_CNTL_CNAK			0x00000100
+#define  ENDP_CNTL_RRDY			0x00000200
+
+/* Endpoint Satus Register definitions */
+
+#define  ENDP_STATUS_PIDMSK		0x0000000f
+#define  ENDP_STATUS_OUTMSK		0x00000030
+#define  ENDP_STATUS_OUT_NONE		0x00000000
+#define  ENDP_STATUS_OUT_DATA		0x00000010
+#define  ENDP_STATUS_OUT_SETUP		0x00000020
+#define  ENDP_STATUS_IN			0x00000040
+#define  ENDP_STATUS_BUFFNAV		0x00000080
+#define  ENDP_STATUS_FATERR		0x00000100
+#define  ENDP_STATUS_HOSTBUSERR		0x00000200
+#define  ENDP_STATUS_TDC		0x00000400
+#define  ENDP_STATUS_RXPKTMSK		0x003ff800
+
+struct udc_regs {
+	struct udc_endp_regs in_regs[MAX_ENDPOINTS];
+	struct udc_endp_regs out_regs[MAX_ENDPOINTS];
+	u32 dev_conf;
+	u32 dev_cntl;
+	u32 dev_stat;
+	u32 dev_int;
+	u32 dev_int_mask;
+	u32 endp_int;
+	u32 endp_int_mask;
+	u32 reserved_3[0x39];
+	u32 reserved_4;		/* offset 0x500 */
+	u32 udc_endp_reg[MAX_ENDPOINTS];
+};
+
+/* Device Configuration Register definitions */
+
+#define  DEV_CONF_HS_SPEED		0x00000000
+#define  DEV_CONF_LS_SPEED		0x00000002
+#define  DEV_CONF_FS_SPEED		0x00000003
+#define  DEV_CONF_REMWAKEUP		0x00000004
+#define  DEV_CONF_SELFPOW		0x00000008
+#define  DEV_CONF_SYNCFRAME		0x00000010
+#define  DEV_CONF_PHYINT_8		0x00000020
+#define  DEV_CONF_PHYINT_16		0x00000000
+#define  DEV_CONF_UTMI_BIDIR		0x00000040
+#define  DEV_CONF_STATUS_STALL		0x00000080
+
+/* Device Control Register definitions */
+
+#define  DEV_CNTL_RESUME		0x00000001
+#define  DEV_CNTL_TFFLUSH		0x00000002
+#define  DEV_CNTL_RXDMAEN		0x00000004
+#define  DEV_CNTL_TXDMAEN		0x00000008
+#define  DEV_CNTL_DESCRUPD		0x00000010
+#define  DEV_CNTL_BIGEND		0x00000020
+#define  DEV_CNTL_BUFFILL		0x00000040
+#define  DEV_CNTL_TSHLDEN		0x00000080
+#define  DEV_CNTL_BURSTEN		0x00000100
+#define  DEV_CNTL_DMAMODE		0x00000200
+#define  DEV_CNTL_SOFTDISCONNECT	0x00000400
+#define  DEV_CNTL_SCALEDOWN		0x00000800
+#define  DEV_CNTL_BURSTLENU		0x00010000
+#define  DEV_CNTL_BURSTLENMSK		0x00ff0000
+#define  DEV_CNTL_TSHLDLENU		0x01000000
+#define  DEV_CNTL_TSHLDLENMSK		0xff000000
+
+/* Device Status Register definitions */
+
+#define  DEV_STAT_CFG			0x0000000f
+#define  DEV_STAT_INTF			0x000000f0
+#define  DEV_STAT_ALT			0x00000f00
+#define  DEV_STAT_SUSP			0x00001000
+#define  DEV_STAT_ENUM			0x00006000
+#define  DEV_STAT_ENUM_SPEED_HS		0x00000000
+#define  DEV_STAT_ENUM_SPEED_FS		0x00002000
+#define  DEV_STAT_ENUM_SPEED_LS		0x00004000
+#define  DEV_STAT_RXFIFO_EMPTY		0x00008000
+#define  DEV_STAT_PHY_ERR		0x00010000
+#define  DEV_STAT_TS			0xf0000000
+
+/* Device Interrupt Register definitions */
+
+#define  DEV_INT_MSK			0x0000007f
+#define  DEV_INT_SETCFG			0x00000001
+#define  DEV_INT_SETINTF		0x00000002
+#define  DEV_INT_INACTIVE		0x00000004
+#define  DEV_INT_USBRESET		0x00000008
+#define  DEV_INT_SUSPUSB		0x00000010
+#define  DEV_INT_SOF			0x00000020
+#define  DEV_INT_ENUM			0x00000040
+
+/* Endpoint Interrupt Register definitions */
+
+#define  ENDP0_INT_CTRLIN		0x00000001
+#define  ENDP1_INT_BULKIN		0x00000002
+#define  ENDP_INT_NONISOIN_MSK		0x0000AAAA
+#define  ENDP2_INT_BULKIN		0x00000004
+#define  ENDP0_INT_CTRLOUT		0x00010000
+#define  ENDP1_INT_BULKOUT		0x00020000
+#define  ENDP2_INT_BULKOUT		0x00040000
+#define  ENDP_INT_NONISOOUT_MSK		0x55540000
+
+/* Endpoint Register definitions */
+#define  ENDP_EPDIR_OUT			0x00000000
+#define  ENDP_EPDIR_IN			0x00000010
+#define  ENDP_EPTYPE_CNTL		0x0
+#define  ENDP_EPTYPE_ISO		0x1
+#define  ENDP_EPTYPE_BULK		0x2
+#define  ENDP_EPTYPE_INT		0x3
+
+/*
+ * Defines for Plug Detect
+ */
+
+struct plug_regs {
+	u32 plug_state;
+	u32 plug_pending;
+};
+
+/* Plug State Register definitions */
+#define  PLUG_STATUS_EN			0x1
+#define  PLUG_STATUS_ATTACHED		0x2
+#define  PLUG_STATUS_PHY_RESET		0x4
+#define  PLUG_STATUS_PHY_MODE		0x8
+
+/*
+ * Defines for UDC FIFO (Slave Mode)
+ */
+struct udcfifo_regs {
+	u32 *fifo_p;
+};
+
+/*
+ * USBTTY definitions
+ */
+#define  EP0_MAX_PACKET_SIZE		64
+#define  UDC_INT_ENDPOINT		1
+#define  UDC_INT_PACKET_SIZE		64
+#define  UDC_OUT_ENDPOINT		2
+#define  UDC_BULK_PACKET_SIZE		64
+#define  UDC_IN_ENDPOINT		3
+#define  UDC_OUT_PACKET_SIZE		64
+#define  UDC_IN_PACKET_SIZE		64
+
+/*
+ * UDC endpoint definitions
+ */
+#define  UDC_EP0			0
+#define  UDC_EP1			1
+#define  UDC_EP2			2
+#define  UDC_EP3			3
+
+/*
+ * Function declarations
+ */
+
+void udc_irq(void);
+
+void udc_set_nak(int epid);
+void udc_unset_nak(int epid);
+int udc_endpoint_write(struct usb_endpoint_instance *endpoint);
+int udc_init(void);
+void udc_enable(struct usb_device_instance *device);
+void udc_disable(void);
+void udc_connect(void);
+void udc_disconnect(void);
+void udc_startup_events(struct usb_device_instance *device);
+void udc_setup_ep(struct usb_device_instance *device, unsigned int ep,
+		  struct usb_endpoint_instance *endpoint);
+
+#endif /* __DW_UDC_H */