mx23: Operate DDR voltage supply at 2.5V
After the recent fixes in the mx23 DDR setup, it is safe to operate DDR voltage
at the recommended 2.5V voltage level again.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index 41fb803..4ed197b 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
@@ -247,7 +247,7 @@
struct mxs_power_regs *power_regs =
(struct mxs_power_regs *)MXS_POWER_BASE;
- writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+ writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
POWER_VDDMEMCTRL_ENABLE_ILIMIT |
POWER_VDDMEMCTRL_ENABLE_LINREG |
POWER_VDDMEMCTRL_PULLDOWN_ACTIVE,
@@ -255,7 +255,7 @@
early_delay(10000);
- writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+ writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
POWER_VDDMEMCTRL_ENABLE_LINREG,
&power_regs->hw_power_vddmemctrl);
}