video: anx9804: split out registers definitions into a separate header
This header will be used in anx6345 driver
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[agust: moved header to drivers/video]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
diff --git a/drivers/video/anx9804.c b/drivers/video/anx9804.c
index 37ad69a..3910458 100755
--- a/drivers/video/anx9804.c
+++ b/drivers/video/anx9804.c
@@ -12,61 +12,9 @@
#include <common.h>
#include <i2c.h>
+#include "anx98xx-edp.h"
#include "anx9804.h"
-/* Registers at i2c address 0x38 */
-
-#define ANX9804_HDCP_CONTROL_0_REG 0x01
-
-#define ANX9804_SYS_CTRL2_REG 0x81
-#define ANX9804_SYS_CTRL2_CHA_STA 0x04
-
-#define ANX9804_SYS_CTRL3_REG 0x82
-#define ANX9804_SYS_CTRL3_VALID_CTRL BIT(0)
-#define ANX9804_SYS_CTRL3_F_VALID BIT(1)
-#define ANX9804_SYS_CTRL3_HPD_CTRL BIT(4)
-#define ANX9804_SYS_CTRL3_F_HPD BIT(5)
-
-#define ANX9804_LINK_BW_SET_REG 0xa0
-#define ANX9804_LANE_COUNT_SET_REG 0xa1
-#define ANX9804_TRAINING_PTN_SET_REG 0xa2
-#define ANX9804_TRAINING_LANE0_SET_REG 0xa3
-#define ANX9804_TRAINING_LANE1_SET_REG 0xa4
-#define ANX9804_TRAINING_LANE2_SET_REG 0xa5
-#define ANX9804_TRAINING_LANE3_SET_REG 0xa6
-
-#define ANX9804_LINK_TRAINING_CTRL_REG 0xa8
-#define ANX9804_LINK_TRAINING_CTRL_EN BIT(0)
-
-#define ANX9804_LINK_DEBUG_REG 0xb8
-#define ANX9804_PLL_CTRL_REG 0xc7
-#define ANX9804_ANALOG_POWER_DOWN_REG 0xc8
-
-/* Registers at i2c address 0x39 */
-
-#define ANX9804_DEV_IDH_REG 0x03
-
-#define ANX9804_POWERD_CTRL_REG 0x05
-#define ANX9804_POWERD_AUDIO BIT(4)
-
-#define ANX9804_RST_CTRL_REG 0x06
-
-#define ANX9804_RST_CTRL2_REG 0x07
-#define ANX9804_RST_CTRL2_AUX BIT(2)
-#define ANX9804_RST_CTRL2_AC_MODE BIT(6)
-
-#define ANX9804_VID_CTRL1_REG 0x08
-#define ANX9804_VID_CTRL1_VID_EN BIT(7)
-#define ANX9804_VID_CTRL1_EDGE BIT(0)
-
-#define ANX9804_VID_CTRL2_REG 0x09
-#define ANX9804_ANALOG_DEBUG_REG1 0xdc
-#define ANX9804_ANALOG_DEBUG_REG3 0xde
-#define ANX9804_PLL_FILTER_CTRL1 0xdf
-#define ANX9804_PLL_FILTER_CTRL3 0xe1
-#define ANX9804_PLL_FILTER_CTRL 0xe2
-#define ANX9804_PLL_CTRL3 0xe6
-
/**
* anx9804_init() - Init anx9804 parallel lcd to edp bridge chip
*