board/BuR: rename tseries board to brppt1
Rename B&R tseries board to brppt1
Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
new file mode 100644
index 0000000..6a239b5
--- /dev/null
+++ b/include/configs/brppt1.h
@@ -0,0 +1,304 @@
+/*
+ * brtpp1.h
+ *
+ * specific parts for B&R T-Series Motherboard
+ *
+ * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
+ * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_BRPPT1_H__
+#define __CONFIG_BRPPT1_H__
+
+#include <configs/bur_cfg_common.h>
+#include <configs/bur_am335x_common.h>
+/* ------------------------------------------------------------------------- */
+#define CONFIG_AM335X_LCD
+#define CONFIG_LCD
+#define CONFIG_LCD_ROTATION
+#define CONFIG_LCD_DT_SIMPLEFB
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define LCD_BPP LCD_COLOR32
+
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_OMAP_WATCHDOG
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+
+#define CONFIG_SPL_GPIO_SUPPORT
+/* Bootcount using the RTC block */
+#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_BOOTCOUNT_AM33XX
+
+/* memory */
+#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
+
+/* Clock Defines */
+#define V_OSCK 26000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK)
+
+#define CONFIG_POWER_TPS65217
+
+/* Support both device trees and ATAGs. */
+#define CONFIG_USE_FDT /* use fdt within board code */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+/*#define CONFIG_MACH_TYPE 3589*/
+#define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/
+
+/* MMC/SD IP block */
+#if defined(CONFIG_EMMC_BOOT)
+ #define CONFIG_MMC
+ #define CONFIG_GENERIC_MMC
+ #define CONFIG_OMAP_HSMMC
+ #define CONFIG_SUPPORT_EMMC_BOOT
+/* RAW SD card / eMMC locations. */
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /*addr. 0x60000 */
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+ #define CONFIG_SPL_MMC_SUPPORT
+#endif /* CONFIG_EMMC_BOOT */
+
+/*
+ * When we have SPI or NAND flash we expect to be making use of mtdparts,
+ * both for ease of use in U-Boot and for passing information on to
+ * the Linux kernel.
+ */
+#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NAND)
+#define CONFIG_MTD_DEVICE /* Required for mtdparts */
+#define CONFIG_CMD_MTDPARTS
+#endif /* CONFIG_SPI_BOOT, ... */
+
+#undef CONFIG_SPL_OS_BOOT
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000
+
+/* RAW SD card / eMMC */
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
+
+/* NAND */
+#ifdef CONFIG_NAND
+#define CONFIG_CMD_SPL_NAND_OFS 0x080000 /* end of u-boot */
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000
+#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
+#endif /* CONFIG_NAND */
+#endif /* CONFIG_SPL_OS_BOOT */
+
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+#endif /* CONFIG_NAND */
+
+/* Always 64 KiB env size */
+#define CONFIG_ENV_SIZE (64 << 10)
+
+#ifdef CONFIG_NAND
+#define NANDARGS \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "nandargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "${optargs_rot} " \
+ "root=mtd6 " \
+ "rootfstype=jffs2\0" \
+ "kernelsize=0x400000\0" \
+ "nandboot=echo booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${loadaddr} kernel ${kernelsize}; " \
+ "bootz ${loadaddr} - ${dtbaddr}\0" \
+ "defboot=run nandboot\0" \
+ "bootlimit=1\0" \
+ "simplefb=1\0 " \
+ "altbootcmd=run usbscript\0"
+#else
+#define NANDARGS ""
+#endif /* CONFIG_NAND */
+
+#ifdef CONFIG_MMC
+#define MMCARGS \
+"dtbdev=mmc\0" \
+"dtbpart=0:1\0" \
+"mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \
+"mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
+ "root=/dev/mmcblk0p2 rootfstype=ext4\0" \
+"mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \
+ "setenv simplefb 1; " \
+ "ext4load mmc 0:1 ${loadaddr} /${kernel}; " \
+ "ext4load mmc 0:1 ${ramaddr} /${ramdisk}; " \
+ "run mmcroot0; bootz ${loadaddr} ${ramaddr} ${dtbaddr};\0" \
+"mmcboot1=echo booting PPT-OS from mmc (ext4-fs) ...; " \
+ "setenv simplefb 0; " \
+ "ext4load mmc 0:2 ${loadaddr} /boot/${kernel}; " \
+ "run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \
+"defboot=ext4load mmc 0:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \
+ "ext4load mmc 0:1 ${dtbaddr} /$dtb && run mmcboot0; " \
+ "run ramboot; run usbscript;\0" \
+"bootlimit=1\0" \
+"altbootcmd=run mmcboot0;\0" \
+"upduboot=dhcp; " \
+ "tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \
+ "tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0"
+#else
+#define MMCARGS ""
+#endif /* CONFIG_MMC */
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_EXTRA_ENV_SETTINGS \
+BUR_COMMON_ENV \
+"verify=no\0" \
+"autoload=0\0" \
+"dtb=bur-ppt-ts30.dtb\0" \
+"dtbaddr=0x80100000\0" \
+"loadaddr=0x80200000\0" \
+"ramaddr=0x80A00000\0" \
+"kernel=zImage\0" \
+"ramdisk=rootfs.cpio.uboot\0" \
+"console=ttyO0,115200n8\0" \
+"optargs=consoleblank=0 quiet panic=2\0" \
+"nfsroot=/tftpboot/tseries/rootfs-small\0" \
+"nfsopts=nolock\0" \
+"ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \
+"netargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=/dev/nfs " \
+ "nfsroot=${serverip}:${nfsroot},${nfsopts} rw " \
+ "ip=dhcp\0" \
+"netboot=echo Booting from network ...; " \
+ "dhcp; " \
+ "tftp ${loadaddr} ${kernel}; " \
+ "tftp ${dtbaddr} ${dtb}; " \
+ "run netargs; " \
+ "bootz ${loadaddr} - ${dtbaddr}\0" \
+"ramboot=echo Booting from network into RAM ...; "\
+ "if dhcp; then; " \
+ "tftp ${loadaddr} ${kernel}; " \
+ "tftp ${ramaddr} ${ramdisk}; " \
+ "if ext4load ${dtbdev} ${dtbpart} ${dtbaddr} /${dtb}; " \
+ "then; else tftp ${dtbaddr} ${dtb}; fi;" \
+ "run mmcroot0; " \
+ "bootz ${loadaddr} ${ramaddr} ${dtbaddr}; fi;\0" \
+"netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
+ "setenv autoload 0; " \
+ "dhcp && tftp 0x80000000 updateUBOOT.img && source;\0" \
+NANDARGS \
+MMCARGS
+#endif /* !CONFIG_SPL_BUILD*/
+
+#define CONFIG_BOOTCOMMAND \
+ "run defboot;"
+
+#ifdef CONFIG_NAND
+/*
+ * GPMC block. We support 1 device and the physical address to
+ * access CS0 at is 0x8000000.
+ */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x8000000
+#define CONFIG_NAND_OMAP_GPMC
+/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
+#define CONFIG_NAND_OMAP_ELM
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
+ CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \
+ 10, 11, 12, 13, 14, 15, 16, 17, \
+ 18, 19, 20, 21, 22, 23, 24, 25, \
+ 26, 27, 28, 29, 30, 31, 32, 33, \
+ 34, 35, 36, 37, 38, 39, 40, 41, \
+ 42, 43, 44, 45, 46, 47, 48, 49, \
+ 50, 51, 52, 53, 54, 55, 56, 57, }
+
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 14
+
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+
+#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \
+ "128k(MLO)," \
+ "128k(MLO.backup)," \
+ "128k(dtb)," \
+ "128k(u-boot-env)," \
+ "512k(u-boot)," \
+ "4m(kernel),"\
+ "128m(rootfs),"\
+ "-(user)"
+#define CONFIG_NAND_OMAP_GPMC_WSCFG 1
+#endif /* CONFIG_NAND */
+
+/* USB configuration */
+#define CONFIG_USB_MUSB_DSPS
+#define CONFIG_ARCH_MISC_INIT
+#define CONFIG_USB_MUSB_PIO_ONLY
+#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
+#define CONFIG_AM335X_USB0
+#define CONFIG_AM335X_USB0_MODE MUSB_HOST
+#define CONFIG_AM335X_USB1
+#define CONFIG_AM335X_USB1_MODE MUSB_HOST
+
+#if defined(CONFIG_SPI_BOOT)
+/* McSPI IP block */
+#define CONFIG_SPI
+#define CONFIG_OMAP3_SPI
+#define CONFIG_SF_DEFAULT_SPEED 24000000
+
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
+#undef CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
+#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */
+#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */
+
+#elif defined(CONFIG_EMMC_BOOT)
+#undef CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
+#define CONFIG_ENV_OFFSET 0x40000 /* TODO: Adresse definieren */
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+
+#elif defined(CONFIG_NAND)
+/* No NAND env support in SPL */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_ENV_IS_NOWHERE
+#else
+#define CONFIG_ENV_IS_IN_NAND
+#endif
+#define CONFIG_ENV_OFFSET 0x60000
+#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE
+#else
+#error "no storage for Environment defined!"
+#endif
+/*
+ * Common filesystems support. When we have removable storage we
+ * enabled a number of useful commands and support.
+ */
+#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
+#define CONFIG_DOS_PARTITION
+#define CONFIG_FAT_WRITE
+#define CONFIG_FS_EXT4
+#define CONFIG_EXT4_WRITE
+#endif /* CONFIG_MMC, ... */
+
+#endif /* ! __CONFIG_BRPPT1_H__ */