Merge branch '2019-06-05-master-imports'
- More DaVinci fixes
- BuR platform fix
diff --git a/arch/arm/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/dts/imx6-logicpd-baseboard.dtsi
index 303c093..c40a7af 100644
--- a/arch/arm/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/dts/imx6-logicpd-baseboard.dtsi
@@ -1,45 +1,6 @@
-/*
- * Copyright 2018 Logic PD, Inc.
- * Based on SabreSD, Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
/ {
keyboard {
@@ -68,6 +29,7 @@
debounce-interval = <10>;
wakeup-source;
};
+
btn3 {
gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>;
label = "btn3";
@@ -81,7 +43,7 @@
leds {
compatible = "gpio-leds";
- gen_led0 {
+ gen-led0 {
label = "led0";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led0>;
@@ -89,25 +51,27 @@
linux,default-trigger = "cpu0";
};
- gen_led1 {
+ gen-led1 {
label = "led1";
gpios = <&pcf8575 8 GPIO_ACTIVE_HIGH>;
};
- gen_led2 {
+ gen-led2 {
label = "led2";
gpios = <&pcf8575 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- gen_led3 {
+ gen-led3 {
label = "led3";
gpios = <&pcf8575 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
};
- reg_usb_otg_vbus: regulator-otg-vbus@0 {
+ reg_usb_otg_vbus: regulator-otg-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb_otg>;
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
@@ -116,14 +80,19 @@
enable-active-high;
};
- reg_usb_h1_vbus: regulator-usbh1vbus@1 {
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
compatible = "regulator-fixed";
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
};
- reg_3v3: regulator-3v3@2 {
+ reg_3v3: regulator-3v3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_3v3>;
compatible = "regulator-fixed";
@@ -131,13 +100,14 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
enable-active-high;
regulator-always-on;
};
- reg_enet: regulator-ethernet@3 {
+ reg_enet: regulator-ethernet {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_pwr>;
+ pinctrl-0 = <&pinctrl_reg_enet>;
compatible = "regulator-fixed";
regulator-name = "ethernet-supply";
regulator-min-microvolt = <3300000>;
@@ -148,7 +118,7 @@
vin-supply = <&sw4_reg>;
};
- reg_audio: regulator-audio@4 {
+ reg_audio: regulator-audio {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_audio>;
compatible = "regulator-fixed";
@@ -157,11 +127,10 @@
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
- regulator-always-on;
vin-supply = <®_3v3>;
};
- reg_hdmi: regulator-hdmi@5 {
+ reg_hdmi: regulator-hdmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_hdmi>;
compatible = "regulator-fixed";
@@ -173,7 +142,7 @@
vin-supply = <®_3v3>;
};
- reg_uart3: regulator-uart3@6 {
+ reg_uart3: regulator-uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_uart3>;
compatible = "regulator-fixed";
@@ -184,7 +153,7 @@
vin-supply = <®_3v3>;
};
- reg_1v8: regulator-1v8@7 {
+ reg_1v8: regulator-1v8 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_1v8>;
compatible = "regulator-fixed";
@@ -195,21 +164,21 @@
vin-supply = <®_3v3>;
};
- reg_pcie: regulator@8 {
+ reg_pcie: regulator-pcie {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcie_reg>;
- regulator-name = "MPCIE_3V3";
+ pinctrl-0 = <&pinctrl_reg_pcie>;
+ regulator-name = "mpcie_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
- mipi_pwr: regulator@9 {
+ reg_mipi: regulator-mipi {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_mipi_pwr>;
+ pinctrl-0 = <&pinctrl_reg_mipi>;
regulator-name = "mipi_pwr_en";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -221,7 +190,7 @@
compatible = "fsl,imx-audio-wm8962";
model = "wm8962-audio";
ssi-controller = <&ssi2>;
- audio-codec = <&codec>;
+ audio-codec = <&wm8962>;
audio-routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
@@ -246,34 +215,10 @@
status = "disabled";
};
-&pwm3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm3>;
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- status = "okay";
-};
-
-&usbh1 {
- vbus-supply = <®_usb_h1_vbus>;
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg>;
- disable-over-current;
- status = "okay";
-};
-
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-duration = <10>;
phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
phy-supply = <®_enet>;
@@ -282,23 +227,13 @@
status = "okay";
};
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
- no-1-8-v;
- keep-power-in-suspend;
- status = "okay";
-};
-
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clock-frequency = <400000>;
status = "okay";
- codec: wm8962@1a {
+ wm8962: audio-codec@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
@@ -330,9 +265,9 @@
reg = <0x10>;
clocks = <&clks IMX6QDL_CLK_CKO>;
clock-names = "xclk";
- DOVDD-supply = <&mipi_pwr>;
- AVDD-supply = <&mipi_pwr>;
- DVDD-supply = <&mipi_pwr>;
+ DOVDD-supply = <®_mipi>;
+ AVDD-supply = <®_mipi>;
+ DVDD-supply = <®_mipi>;
reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
@@ -361,6 +296,11 @@
};
};
+&ipu1_csi1_from_mipi_vc1 {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+};
+
&mipi_csi {
status = "okay";
@@ -379,17 +319,52 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
- status = "okay";
vpcie-supply = <®_pcie>;
- /* fsl,max-link-speed = <2>; */
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
};
&ssi2 {
status = "okay";
};
-&iomuxc {
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ vmmc-supply = <®_3v3>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&iomuxc {
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
@@ -399,21 +374,49 @@
>;
};
- pinctrl_i2c1: i2c1 {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x100b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* ENET_INT */
+ MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1b0b0 /* ETHR_nRST */
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>;
};
- pinctrl_enet_pwr: enet_pwr {
- fsl,pins = <
- MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
- >;
- };
-
- pinctrl_mipi_pwr: pwr_mipi {
- fsl,pins = <MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b1>;
+ pinctrl_led0: led0grp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
+ >;
};
pinctrl_ov5640: ov5640grp {
@@ -423,12 +426,83 @@
>;
};
- pinctrl_reg_hdmi: reg_hdmi {
+ pinctrl_pcf8574: pcf8575grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_reg_1v8: reg1v8grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_3v3: reg3v3grp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_audio: reg-audiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_enet: reg-enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_hdmi: reg-hdmigrp {
fsl,pins = <
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
>;
};
+ pinctrl_reg_mipi: reg-mipigrp {
+ fsl,pins = <MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b1>;
+ };
+
+ pinctrl_reg_pcie: reg-pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_uart3: reguart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_usb_h1_vbus: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_usb_otg: reg-usb-otggrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ >;
+ };
+
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
@@ -441,16 +515,6 @@
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0xd17059
- MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0
- >;
- };
-
- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
- MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
- MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
- MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x100b1
>;
};
@@ -490,107 +554,4 @@
>;
};
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
- MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* ENET_INT */
- MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1b0b0 /* ETHR_nRST */
- >;
- };
-
- pinctrl_reg_audio: audio-reg {
- fsl,pins = <
- MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
- >;
- };
-
- pinctrl_pcie: pcie {
- fsl,pins = <
- MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
- MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
- >;
- };
-
- pinctrl_pcie_reg: pciereggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
- >;
- };
-
- pinctrl_pcf8574: pcf8575-pins {
- fsl,pins = <
- MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
- >;
- };
-
- pinctrl_lcd: lcdgrp {
- fsl,pins = <
- MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* R_LCD_DCLK */
- MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x100b0 /* R_LCD_PANEL_PWR */
- MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 /* R_LCD_HSYNC */
- MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 /* R_LCD_VSYNC */
- MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x10 /* R_LCD_MDISP */
- MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
- MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
- MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
- MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
- MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
- MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
- MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
- MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
- MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
- MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
- MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
- MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
- MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
- MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
- MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
- MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
- >;
- };
-
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
- >;
- };
-
- pinctrl_reg_uart3: uart3reg {
- fsl,pins = <
- MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
- >;
- };
-
- pinctrl_reg_3v3: reg-3v3 {
- fsl,pins = <
- MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0
- >;
- };
-
- pinctrl_reg_1v8: reg-1v8 {
- fsl,pins = <
- MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0
- >;
- };
-
- pinctrl_led0: led0 {
- fsl,pins = <
- MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
- >;
- };
};
diff --git a/arch/arm/dts/imx6-logicpd-som.dtsi b/arch/arm/dts/imx6-logicpd-som.dtsi
index 3fc50ba..7ceae35 100644
--- a/arch/arm/dts/imx6-logicpd-som.dtsi
+++ b/arch/arm/dts/imx6-logicpd-som.dtsi
@@ -1,16 +1,6 @@
-/*
- * Copyright 2018 Logic PD
- * This file is adapted from imx6qdl-sabresd.dtsi.
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
@@ -20,7 +10,8 @@
stdout-path = &uart1;
};
- memory {
+ memory@10000000 {
+ device_type = "memory";
reg = <0x10000000 0x80000000>;
};
@@ -35,17 +26,6 @@
};
};
-/* Reroute power feeding the CPU to come from the external PMIC */
-®_arm
-{
- vin-supply = <&sw1a_reg>;
-};
-
-®_soc
-{
- vin-supply = <&sw1c_reg>;
-};
-
&clks {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
@@ -56,8 +36,8 @@
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
- status = "okay";
nand-on-flash-bbt;
+ status = "okay";
};
&i2c3 {
@@ -66,7 +46,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- pmic: pfuze100@08 {
+ pfuze100: pmic@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
@@ -94,20 +74,19 @@
regulator-max-microvolt = <3300000>;
regulator-name = "gen_3v3";
regulator-boot-on;
- /* regulator-always-on; */
};
sw3a_reg: sw3a {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
regulator-name = "sw3a_vddr";
regulator-boot-on;
regulator-always-on;
};
sw3b_reg: sw3b {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
regulator-name = "sw3b_vddr";
regulator-boot-on;
regulator-always-on;
@@ -152,8 +131,8 @@
vgen3_reg: vgen3 {
regulator-name = "gen_vadj_0";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
};
vgen4_reg: vgen4 {
@@ -164,8 +143,8 @@
};
vgen5_reg: vgen5 {
- regulator-name = "gen_adj_1";
- regulator-min-microvolt = <3300000>;
+ regulator-name = "gen_vadj_1";
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
@@ -185,7 +164,15 @@
};
};
- temp_sense0: tmp102@4a {
+ temperature-sensor@49 {
+ compatible = "ti,tmp102";
+ reg = <0x49>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ temperature-sensor@4a {
compatible = "ti,tmp102";
reg = <0x4a>;
pinctrl-names = "default";
@@ -195,34 +182,57 @@
#thermal-sensor-cells = <1>;
};
- temp_sense1: tmp102@49 {
- compatible = "ti,tmp102";
- reg = <0x49>;
- interrupt-parent = <&gpio6>;
- interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
- #thermal-sensor-cells = <1>;
- };
-
- mfg_eeprom: at24@51 {
+ eeprom@51 {
compatible = "atmel,24c64";
pagesize = <32>;
- read-only;
+ read-only; /* Manufacturing EEPROM programmed at factory */
reg = <0x51>;
};
- user_eeprom: at24@52 {
+ eeprom@52 {
compatible = "atmel,24c64";
pagesize = <32>;
reg = <0x52>;
};
};
+/* Reroute power feeding the CPU to come from the external PMIC */
+®_arm
+{
+ vin-supply = <&sw1a_reg>;
+};
+
+®_soc
+{
+ vin-supply = <&sw1c_reg>;
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- pinctrl_hog: hoggrp {
+ pinctrl_gpmi_nand: gpmi-nandgrp {
fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = < /* Enable ARM Debugger */
MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x1b0b0
MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x1b0b0
MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x1b0b0
@@ -246,26 +256,6 @@
>;
};
- pinctrl_gpmi_nand: gpminandgrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1
- >;
- };
-
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
@@ -273,6 +263,12 @@
>;
};
+ pinctrl_tempsense: tempsensegrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
@@ -282,7 +278,7 @@
pinctrl_uart2: uart2grp {
fsl,pins = <
- MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x13059 /* BT_EN */
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x13059 /* BT_EN */
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
@@ -313,12 +309,6 @@
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* WLAN_EN */
>;
};
-
- pinctrl_tempsense: tempsensegrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Temp Sense Alert */
- >;
- };
};
&snvs_poweroff {
@@ -334,8 +324,9 @@
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
uart-has-rtscts;
+ status = "okay";
+
bluetooth {
compatible = "ti,wl1837-st";
enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
@@ -347,9 +338,9 @@
pinctrl-0 = <&pinctrl_usdhc1>;
non-removable;
keep-power-in-suspend;
- enable-sdio-wakeup;
- status = "okay";
+ wakeup-source;
vmmc-supply = <&sw2_reg>;
+ status = "okay";
};
&usdhc3 {
@@ -360,9 +351,10 @@
keep-power-in-suspend;
wakeup-source;
vmmc-supply = <®_wl18xx_vmmc>;
- status = "okay";
#address-cells = <1>;
#size-cells = <0>;
+ status = "okay";
+
wlcore: wlcore@2 {
compatible = "ti,wl1837";
reg = <2>;
diff --git a/arch/arm/dts/imx6q-logicpd.dts b/arch/arm/dts/imx6q-logicpd.dts
index dcea784..45eb0b7 100644
--- a/arch/arm/dts/imx6q-logicpd.dts
+++ b/arch/arm/dts/imx6q-logicpd.dts
@@ -1,45 +1,6 @@
-/*
- * Copyright 2018 Logic PD, Inc.
- * Based on SabreSD, Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
/dts-v1/;
#include "imx6q.dtsi"
@@ -47,10 +8,10 @@
#include "imx6-logicpd-baseboard.dtsi"
/ {
- model = "Logic PD i.MX6QD SOM-M3 (HDMI)";
+ model = "Logic PD i.MX6QD SOM-M3";
compatible = "fsl,imx6q";
- backlight: backlight_lvds {
+ backlight: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&pwm3 0 20000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -58,6 +19,16 @@
power-supply = <®_lcd>;
};
+ panel-lvds0 {
+ compatible = "okaya,rs800480t-7x0gp";
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
reg_lcd: regulator-lcd {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_reg>;
@@ -72,7 +43,7 @@
startup-delay-us = <500000>;
};
- lcd_reset: lcd_reset {
+ reg_lcd_reset: regulator-lcd-reset {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_reset>;
compatible = "regulator-fixed";
@@ -84,57 +55,6 @@
regulator-always-on;
vin-supply = <®_lcd>;
};
-
- panel-lvds0 {
- compatible = "ampire,am800480b3tmqw";
- backlight = <&backlight>;
-
- port {
- panel_in_lvds0: endpoint {
- remote-endpoint = <&lvds0_out>;
- };
- };
- };
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- status = "okay";
-};
-
-&i2c1 {
- ili_touch: ilitouch@26 {
- compatible = "ili,ili2117a";
- reg = <0x26>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_touchscreen>;
- interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>;
- ili2117a,poll-period = <10>;
- ili2117a,max-touch = <2>;
- };
-};
-
-®_hdmi {
- regulator-always-on;
-};
-
-&ldb {
- status = "okay";
-
- lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <24>;
- status = "okay";
-
- port@4 {
- reg = <4>;
-
- lvds0_out: endpoint {
- remote-endpoint = <&panel_in_lvds0>;
- };
- };
- };
-
};
&clks {
@@ -148,12 +68,35 @@
<&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
};
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+
+};
+
&pwm3 {
status = "okay";
};
-&usdhc2 {
- cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+®_hdmi {
+ regulator-always-on; /* Without this, the level shifter on HDMI doesn't turn on */
};
&iomuxc {
@@ -165,7 +108,7 @@
pinctrl_lcd_reset: lcdreset {
fsl,pins = <
- MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 /* LCD_nRESET */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 /* LCD_nRESET */
>;
};
@@ -175,4 +118,3 @@
>;
};
};
-
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 61e84e5..adc5092 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -134,7 +134,6 @@
source "board/lego/ev3/Kconfig"
config SPL_LDSCRIPT
- default "board/$(BOARDDIR)/u-boot-spl-ipam390.lds" if TARGET_IPAM390
default "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
endif
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 6887fe0..ed88274 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -18,7 +18,3 @@
obj-$(CONFIG_SOC_DM365) += dm365_lowlevel.o
obj-$(CONFIG_SOC_DA8XX) += da850_lowlevel.o
endif
-
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-obj-y += lowlevel_init.o
-endif
diff --git a/arch/arm/mach-davinci/lowlevel_init.S b/arch/arm/mach-davinci/lowlevel_init.S
deleted file mode 100644
index b82dafa..0000000
--- a/arch/arm/mach-davinci/lowlevel_init.S
+++ /dev/null
@@ -1,692 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Low-level board setup code for TI DaVinci SoC based boards.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Partially based on TI sources, original copyrights follow:
- */
-
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
- *
- * Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004
- *
- * Modified for DV-EVM board by Rishi Bhattacharya, Apr 2005
- *
- * Modified for DV-EVM board by Swaminathan S, Nov 2005
- */
-
-#include <config.h>
-
-#define MDSTAT_STATE 0x3f
-
-.globl lowlevel_init
-lowlevel_init:
-#ifdef CONFIG_SOC_DM644X
-
- /*-------------------------------------------------------*
- * Mask all IRQs by setting all bits in the EINT default *
- *-------------------------------------------------------*/
- mov r1, $0
- ldr r0, =EINT_ENABLE0
- str r1, [r0]
- ldr r0, =EINT_ENABLE1
- str r1, [r0]
-
- /*------------------------------------------------------*
- * Put the GEM in reset *
- *------------------------------------------------------*/
-
- /* Put the GEM in reset */
- ldr r8, PSC_GEM_FLAG_CLEAR
- ldr r6, MDCTL_GEM
- ldr r7, [r6]
- and r7, r7, r8
- str r7, [r6]
-
- /* Enable the Power Domain Transition Command */
- ldr r6, PTCMD
- ldr r7, [r6]
- orr r7, r7, $0x02
- str r7, [r6]
-
- /* Check for Transition Complete(PTSTAT) */
-checkStatClkStopGem:
- ldr r6, PTSTAT
- ldr r7, [r6]
- ands r7, r7, $0x02
- bne checkStatClkStopGem
-
- /* Check for GEM Reset Completion */
-checkGemStatClkStop:
- ldr r6, MDSTAT_GEM
- ldr r7, [r6]
- ands r7, r7, $0x100
- bne checkGemStatClkStop
-
- /* Do this for enabling a WDT initiated reset this is a workaround
- for a chip bug. Not required under normal situations */
- ldr r6, P1394
- mov r10, $0
- str r10, [r6]
-
- /*------------------------------------------------------*
- * Enable L1 & L2 Memories in Fast mode *
- *------------------------------------------------------*/
- ldr r6, DFT_ENABLE
- mov r10, $0x01
- str r10, [r6]
-
- ldr r6, MMARG_BRF0
- ldr r10, MMARG_BRF0_VAL
- str r10, [r6]
-
- ldr r6, DFT_ENABLE
- mov r10, $0
- str r10, [r6]
-
- /*------------------------------------------------------*
- * DDR2 PLL Initialization *
- *------------------------------------------------------*/
-
- /* Select the Clock Mode Depending on the Value written in the Boot Table by the run script */
- mov r10, $0
- ldr r6, PLL2_CTL
- ldr r7, PLL_CLKSRC_MASK
- ldr r8, [r6]
- and r8, r8, r7
- mov r9, r10, lsl $8
- orr r8, r8, r9
- str r8, [r6]
-
- /* Select the PLLEN source */
- ldr r7, PLL_ENSRC_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Bypass the PLL */
- ldr r7, PLL_BYPASS_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Wait for few cycles to allow PLLEN Mux switch properly to bypass Clock */
- mov r10, $0x20
-WaitPPL2Loop:
- subs r10, r10, $1
- bne WaitPPL2Loop
-
- /* Reset the PLL */
- ldr r7, PLL_RESET_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Power up the PLL */
- ldr r7, PLL_PWRUP_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Enable the PLL from Disable Mode */
- ldr r7, PLL_DISABLE_ENABLE_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Program the PLL Multiplier */
- ldr r6, PLL2_PLLM
- mov r2, $0x17 /* 162 MHz */
- str r2, [r6]
-
- /* Program the PLL2 Divisor Value */
- ldr r6, PLL2_DIV2
- mov r3, $0x01
- str r3, [r6]
-
- /* Program the PLL2 Divisor Value */
- ldr r6, PLL2_DIV1
- mov r4, $0x0b /* 54 MHz */
- str r4, [r6]
-
- /* PLL2 DIV2 MMR */
- ldr r8, PLL2_DIV_MASK
- ldr r6, PLL2_DIV2
- ldr r9, [r6]
- and r8, r8, r9
- mov r9, $0x01
- mov r9, r9, lsl $15
- orr r8, r8, r9
- str r8, [r6]
-
- /* Program the GOSET bit to take new divider values */
- ldr r6, PLL2_PLLCMD
- ldr r7, [r6]
- orr r7, r7, $0x01
- str r7, [r6]
-
- /* Wait for Done */
- ldr r6, PLL2_PLLSTAT
-doneLoop_0:
- ldr r7, [r6]
- ands r7, r7, $0x01
- bne doneLoop_0
-
- /* PLL2 DIV1 MMR */
- ldr r8, PLL2_DIV_MASK
- ldr r6, PLL2_DIV1
- ldr r9, [r6]
- and r8, r8, r9
- mov r9, $0x01
- mov r9, r9, lsl $15
- orr r8, r8, r9
- str r8, [r6]
-
- /* Program the GOSET bit to take new divider values */
- ldr r6, PLL2_PLLCMD
- ldr r7, [r6]
- orr r7, r7, $0x01
- str r7, [r6]
-
- /* Wait for Done */
- ldr r6, PLL2_PLLSTAT
-doneLoop:
- ldr r7, [r6]
- ands r7, r7, $0x01
- bne doneLoop
-
- /* Wait for PLL to Reset Properly */
- mov r10, $0x218
-ResetPPL2Loop:
- subs r10, r10, $1
- bne ResetPPL2Loop
-
- /* Bring PLL out of Reset */
- ldr r6, PLL2_CTL
- ldr r8, [r6]
- orr r8, r8, $0x08
- str r8, [r6]
-
- /* Wait for PLL to Lock */
- ldr r10, PLL_LOCK_COUNT
-PLL2Lock:
- subs r10, r10, $1
- bne PLL2Lock
-
- /* Enable the PLL */
- ldr r6, PLL2_CTL
- ldr r8, [r6]
- orr r8, r8, $0x01
- str r8, [r6]
-
- /*------------------------------------------------------*
- * Issue Soft Reset to DDR Module *
- *------------------------------------------------------*/
-
- /* Shut down the DDR2 LPSC Module */
- ldr r8, PSC_FLAG_CLEAR
- ldr r6, MDCTL_DDR2
- ldr r7, [r6]
- and r7, r7, r8
- orr r7, r7, $0x03
- str r7, [r6]
-
- /* Enable the Power Domain Transition Command */
- ldr r6, PTCMD
- ldr r7, [r6]
- orr r7, r7, $0x01
- str r7, [r6]
-
- /* Check for Transition Complete(PTSTAT) */
-checkStatClkStop:
- ldr r6, PTSTAT
- ldr r7, [r6]
- ands r7, r7, $0x01
- bne checkStatClkStop
-
- /* Check for DDR2 Controller Enable Completion */
-checkDDRStatClkStop:
- ldr r6, MDSTAT_DDR2
- ldr r7, [r6]
- and r7, r7, $MDSTAT_STATE
- cmp r7, $0x03
- bne checkDDRStatClkStop
-
- /*------------------------------------------------------*
- * Program DDR2 MMRs for 162MHz Setting *
- *------------------------------------------------------*/
-
- /* Program PHY Control Register */
- ldr r6, DDRCTL
- ldr r7, DDRCTL_VAL
- str r7, [r6]
-
- /* Program SDRAM Bank Config Register */
- ldr r6, SDCFG
- ldr r7, SDCFG_VAL
- str r7, [r6]
-
- /* Program SDRAM TIM-0 Config Register */
- ldr r6, SDTIM0
- ldr r7, SDTIM0_VAL_162MHz
- str r7, [r6]
-
- /* Program SDRAM TIM-1 Config Register */
- ldr r6, SDTIM1
- ldr r7, SDTIM1_VAL_162MHz
- str r7, [r6]
-
- /* Program the SDRAM Bank Config Control Register */
- ldr r10, MASK_VAL
- ldr r8, SDCFG
- ldr r9, SDCFG_VAL
- and r9, r9, r10
- str r9, [r8]
-
- /* Program SDRAM SDREF Config Register */
- ldr r6, SDREF
- ldr r7, SDREF_VAL
- str r7, [r6]
-
- /*------------------------------------------------------*
- * Issue Soft Reset to DDR Module *
- *------------------------------------------------------*/
-
- /* Issue a Dummy DDR2 read/write */
- ldr r8, DDR2_START_ADDR
- ldr r7, DUMMY_VAL
- str r7, [r8]
- ldr r7, [r8]
-
- /* Shut down the DDR2 LPSC Module */
- ldr r8, PSC_FLAG_CLEAR
- ldr r6, MDCTL_DDR2
- ldr r7, [r6]
- and r7, r7, r8
- orr r7, r7, $0x01
- str r7, [r6]
-
- /* Enable the Power Domain Transition Command */
- ldr r6, PTCMD
- ldr r7, [r6]
- orr r7, r7, $0x01
- str r7, [r6]
-
- /* Check for Transition Complete(PTSTAT) */
-checkStatClkStop2:
- ldr r6, PTSTAT
- ldr r7, [r6]
- ands r7, r7, $0x01
- bne checkStatClkStop2
-
- /* Check for DDR2 Controller Enable Completion */
-checkDDRStatClkStop2:
- ldr r6, MDSTAT_DDR2
- ldr r7, [r6]
- and r7, r7, $MDSTAT_STATE
- cmp r7, $0x01
- bne checkDDRStatClkStop2
-
- /*------------------------------------------------------*
- * Turn DDR2 Controller Clocks On *
- *------------------------------------------------------*/
-
- /* Enable the DDR2 LPSC Module */
- ldr r6, MDCTL_DDR2
- ldr r7, [r6]
- orr r7, r7, $0x03
- str r7, [r6]
-
- /* Enable the Power Domain Transition Command */
- ldr r6, PTCMD
- ldr r7, [r6]
- orr r7, r7, $0x01
- str r7, [r6]
-
- /* Check for Transition Complete(PTSTAT) */
-checkStatClkEn2:
- ldr r6, PTSTAT
- ldr r7, [r6]
- ands r7, r7, $0x01
- bne checkStatClkEn2
-
- /* Check for DDR2 Controller Enable Completion */
-checkDDRStatClkEn2:
- ldr r6, MDSTAT_DDR2
- ldr r7, [r6]
- and r7, r7, $MDSTAT_STATE
- cmp r7, $0x03
- bne checkDDRStatClkEn2
-
- /* DDR Writes and Reads */
- ldr r6, CFGTEST
- mov r3, $0x01
- str r3, [r6]
-
- /*------------------------------------------------------*
- * System PLL Initialization *
- *------------------------------------------------------*/
-
- /* Select the Clock Mode Depending on the Value written in the Boot Table by the run script */
- mov r2, $0
- ldr r6, PLL1_CTL
- ldr r7, PLL_CLKSRC_MASK
- ldr r8, [r6]
- and r8, r8, r7
- mov r9, r2, lsl $8
- orr r8, r8, r9
- str r8, [r6]
-
- /* Select the PLLEN source */
- ldr r7, PLL_ENSRC_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Bypass the PLL */
- ldr r7, PLL_BYPASS_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Wait for few cycles to allow PLLEN Mux switch properly to bypass Clock */
- mov r10, $0x20
-
-WaitLoop:
- subs r10, r10, $1
- bne WaitLoop
-
- /* Reset the PLL */
- ldr r7, PLL_RESET_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Disable the PLL */
- orr r8, r8, $0x10
- str r8, [r6]
-
- /* Power up the PLL */
- ldr r7, PLL_PWRUP_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Enable the PLL from Disable Mode */
- ldr r7, PLL_DISABLE_ENABLE_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Program the PLL Multiplier */
- ldr r6, PLL1_PLLM
- mov r3, $0x15 /* For 594MHz */
- str r3, [r6]
-
- /* Wait for PLL to Reset Properly */
- mov r10, $0xff
-
-ResetLoop:
- subs r10, r10, $1
- bne ResetLoop
-
- /* Bring PLL out of Reset */
- ldr r6, PLL1_CTL
- orr r8, r8, $0x08
- str r8, [r6]
-
- /* Wait for PLL to Lock */
- ldr r10, PLL_LOCK_COUNT
-
-PLL1Lock:
- subs r10, r10, $1
- bne PLL1Lock
-
- /* Enable the PLL */
- orr r8, r8, $0x01
- str r8, [r6]
-
- nop
- nop
- nop
- nop
-
- /*------------------------------------------------------*
- * AEMIF configuration for NOR Flash (double check) *
- *------------------------------------------------------*/
- ldr r0, _PINMUX0
- ldr r1, _DEV_SETTING
- str r1, [r0]
-
- ldr r0, WAITCFG
- ldr r1, WAITCFG_VAL
- ldr r2, [r0]
- orr r2, r2, r1
- str r2, [r0]
-
- ldr r0, ACFG3
- ldr r1, ACFG3_VAL
- ldr r2, [r0]
- and r1, r2, r1
- str r1, [r0]
-
- ldr r0, ACFG4
- ldr r1, ACFG4_VAL
- ldr r2, [r0]
- and r1, r2, r1
- str r1, [r0]
-
- ldr r0, ACFG5
- ldr r1, ACFG5_VAL
- ldr r2, [r0]
- and r1, r2, r1
- str r1, [r0]
-
- /*--------------------------------------*
- * VTP manual Calibration *
- *--------------------------------------*/
- ldr r0, VTPIOCR
- ldr r1, VTP_MMR0
- str r1, [r0]
-
- ldr r0, VTPIOCR
- ldr r1, VTP_MMR1
- str r1, [r0]
-
- /* Wait for 33 VTP CLK cycles. VRP operates at 27 MHz */
- ldr r10, VTP_LOCK_COUNT
-VTPLock:
- subs r10, r10, $1
- bne VTPLock
-
- ldr r6, DFT_ENABLE
- mov r10, $0x01
- str r10, [r6]
-
- ldr r6, DDRVTPR
- ldr r7, [r6]
- mov r8, r7, LSL #32-10
- mov r8, r8, LSR #32-10 /* grab low 10 bits */
- ldr r7, VTP_RECAL
- orr r8, r7, r8
- ldr r7, VTP_EN
- orr r8, r7, r8
- str r8, [r0]
-
-
- /* Wait for 33 VTP CLK cycles. VRP operates at 27 MHz */
- ldr r10, VTP_LOCK_COUNT
-VTP1Lock:
- subs r10, r10, $1
- bne VTP1Lock
-
- ldr r1, [r0]
- ldr r2, VTP_MASK
- and r2, r1, r2
- str r2, [r0]
-
- ldr r6, DFT_ENABLE
- mov r10, $0
- str r10, [r6]
-
- /*
- * Call board-specific lowlevel init.
- * That MUST be present and THAT returns
- * back to arch calling code with "mov pc, lr."
- */
- b dv_board_init
-
-.ltorg
-
-_PINMUX0:
- .word 0x01c40000 /* Device Configuration Registers */
-_PINMUX1:
- .word 0x01c40004 /* Device Configuration Registers */
-
-_DEV_SETTING:
- .word 0x00000c1f
-
-WAITCFG:
- .word 0x01e00004
-WAITCFG_VAL:
- .word 0
-ACFG3:
- .word 0x01e00014
-ACFG3_VAL:
- .word 0x3ffffffd
-ACFG4:
- .word 0x01e00018
-ACFG4_VAL:
- .word 0x3ffffffd
-ACFG5:
- .word 0x01e0001c
-ACFG5_VAL:
- .word 0x3ffffffd
-
-MDCTL_DDR2:
- .word 0x01c41a34
-MDSTAT_DDR2:
- .word 0x01c41834
-
-PTCMD:
- .word 0x01c41120
-PTSTAT:
- .word 0x01c41128
-
-EINT_ENABLE0:
- .word 0x01c48018
-EINT_ENABLE1:
- .word 0x01c4801c
-
-PSC_FLAG_CLEAR:
- .word 0xffffffe0
-PSC_GEM_FLAG_CLEAR:
- .word 0xfffffeff
-
-/* DDR2 MMR & CONFIGURATION VALUES, 162 MHZ clock */
-DDRCTL:
- .word 0x200000e4
-DDRCTL_VAL:
- .word 0x50006405
-SDREF:
- .word 0x2000000c
-SDREF_VAL:
- .word 0x000005c3
-SDCFG:
- .word 0x20000008
-SDCFG_VAL:
-#ifdef DDR_4BANKS
- .word 0x00178622
-#elif defined DDR_8BANKS
- .word 0x00178632
-#else
-#error "Unknown DDR configuration!!!"
-#endif
-SDTIM0:
- .word 0x20000010
-SDTIM0_VAL_162MHz:
- .word 0x28923211
-SDTIM1:
- .word 0x20000014
-SDTIM1_VAL_162MHz:
- .word 0x0016c722
-VTPIOCR:
- .word 0x200000f0 /* VTP IO Control register */
-DDRVTPR:
- .word 0x01c42030 /* DDR VPTR MMR */
-VTP_MMR0:
- .word 0x201f
-VTP_MMR1:
- .word 0xa01f
-DFT_ENABLE:
- .word 0x01c4004c
-VTP_LOCK_COUNT:
- .word 0x5b0
-VTP_MASK:
- .word 0xffffdfff
-VTP_RECAL:
- .word 0x08000
-VTP_EN:
- .word 0x02000
-CFGTEST:
- .word 0x80010000
-MASK_VAL:
- .word 0x00000fff
-
-/* GEM Power Up & LPSC Control Register */
-MDCTL_GEM:
- .word 0x01c41a9c
-MDSTAT_GEM:
- .word 0x01c4189c
-
-/* For WDT reset chip bug */
-P1394:
- .word 0x01c41a20
-
-PLL_CLKSRC_MASK:
- .word 0xfffffeff /* Mask the Clock Mode bit */
-PLL_ENSRC_MASK:
- .word 0xffffffdf /* Select the PLLEN source */
-PLL_BYPASS_MASK:
- .word 0xfffffffe /* Put the PLL in BYPASS */
-PLL_RESET_MASK:
- .word 0xfffffff7 /* Put the PLL in Reset Mode */
-PLL_PWRUP_MASK:
- .word 0xfffffffd /* PLL Power up Mask Bit */
-PLL_DISABLE_ENABLE_MASK:
- .word 0xffffffef /* Enable the PLL from Disable */
-PLL_LOCK_COUNT:
- .word 0x2000
-
-/* PLL1-SYSTEM PLL MMRs */
-PLL1_CTL:
- .word 0x01c40900
-PLL1_PLLM:
- .word 0x01c40910
-
-/* PLL2-SYSTEM PLL MMRs */
-PLL2_CTL:
- .word 0x01c40d00
-PLL2_PLLM:
- .word 0x01c40d10
-PLL2_DIV1:
- .word 0x01c40d18
-PLL2_DIV2:
- .word 0x01c40d1c
-PLL2_PLLCMD:
- .word 0x01c40d38
-PLL2_PLLSTAT:
- .word 0x01c40d3c
-PLL2_DIV_MASK:
- .word 0xffff7fff
-
-MMARG_BRF0:
- .word 0x01c42010 /* BRF margin mode 0 (R/W)*/
-MMARG_BRF0_VAL:
- .word 0x00444400
-
-DDR2_START_ADDR:
- .word 0x80000000
-DUMMY_VAL:
- .word 0xa55aa55a
-#else /* CONFIG_SOC_DM644X */
- mov pc, lr
-#endif
diff --git a/arch/arm/mach-davinci/spl.c b/arch/arm/mach-davinci/spl.c
index 103639e..be3daa9 100644
--- a/arch/arm/mach-davinci/spl.c
+++ b/arch/arm/mach-davinci/spl.c
@@ -31,9 +31,12 @@
}
#endif /* CONFIG_SPL_LIBCOMMON_SUPPORT */
-void spl_board_init(void)
+void board_init_f(ulong dummy)
{
arch_cpu_init();
+
+ spl_early_init();
+
preloader_console_init();
}
diff --git a/arch/arm/mach-omap2/omap3/board.c b/arch/arm/mach-omap2/omap3/board.c
index 2d25fc6..658ef8c 100644
--- a/arch/arm/mach-omap2/omap3/board.c
+++ b/arch/arm/mach-omap2/omap3/board.c
@@ -34,6 +34,8 @@
#endif
#ifdef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
+/* Manually initialize GPIO banks when OF_CONTROL doesn't */
static const struct omap_gpio_platdata omap34xx_gpio[] = {
{ 0, OMAP34XX_GPIO1_BASE },
{ 1, OMAP34XX_GPIO2_BASE },
@@ -51,7 +53,7 @@
{ "gpio_omap", &omap34xx_gpio[4] },
{ "gpio_omap", &omap34xx_gpio[5] },
};
-
+#endif
#else
static const struct gpio_bank gpio_bank_34xx[6] = {
diff --git a/board/BuR/common/br_resetc.c b/board/BuR/common/br_resetc.c
index 190f141..c8cc73a 100644
--- a/board/BuR/common/br_resetc.c
+++ b/board/BuR/common/br_resetc.c
@@ -64,6 +64,7 @@
return -1;
}
+ resetc.is_psoc = 1;
rc = dm_i2c_probe(i2cbus,
RSTCTRL_ADDR_PSOC, 0, &resetc.i2cdev);
if (rc) {
diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index 1bc2682..a90b7a3 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -62,7 +62,7 @@
return -1;
}
- ret = spi_flash_read(flash, (CFG_MAC_ADDR_OFFSET) + 1, 7, addr);
+ ret = spi_flash_read(flash, (CFG_MAC_ADDR_OFFSET), 6, addr);
if (ret) {
printf("Error - unable to read MAC address from SPI flash.\n");
return -1;
diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c
index 2c2f885..fe1bf44 100644
--- a/board/davinci/da8xxevm/omapl138_lcdk.c
+++ b/board/davinci/da8xxevm/omapl138_lcdk.c
@@ -353,7 +353,7 @@
return 0;
}
-#ifndef CONFIG_DM_MMC
+#if !CONFIG_IS_ENABLED(DM_MMC)
#ifdef CONFIG_MMC_DAVINCI
static struct davinci_mmc mmc_sd0 = {
.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
diff --git a/board/keymile/km83xx/MAINTAINERS b/board/keymile/km83xx/MAINTAINERS
index 63b0651..94e0d57 100644
--- a/board/keymile/km83xx/MAINTAINERS
+++ b/board/keymile/km83xx/MAINTAINERS
@@ -1,5 +1,5 @@
KM83XX BOARD
-M: Holger Brunck <holger.brunck@keymile.com>
+M: Holger Brunck <holger.brunck@ch.abb.com>
S: Maintained
F: board/keymile/km83xx/
F: include/configs/km8360.h
diff --git a/board/keymile/km_arm/MAINTAINERS b/board/keymile/km_arm/MAINTAINERS
index 079c803..d156e85 100644
--- a/board/keymile/km_arm/MAINTAINERS
+++ b/board/keymile/km_arm/MAINTAINERS
@@ -1,5 +1,5 @@
KM_ARM BOARD
-M: Valentin Longchamp <valentin.longchamp@keymile.com>
+M: Valentin Longchamp <valentin.longchamp@ch.abb.com>
S: Maintained
F: board/keymile/km_arm/
F: include/configs/km_kirkwood.h
diff --git a/board/keymile/kmp204x/MAINTAINERS b/board/keymile/kmp204x/MAINTAINERS
index 93b6bad..c5170c9 100644
--- a/board/keymile/kmp204x/MAINTAINERS
+++ b/board/keymile/kmp204x/MAINTAINERS
@@ -1,5 +1,5 @@
KMP204X BOARD
-M: Valentin Longchamp <valentin.longchamp@keymile.com>
+M: Valentin Longchamp <valentin.longchamp@ch.abb.com>
S: Maintained
F: board/keymile/kmp204x/
F: include/configs/kmp204x.h
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 37a5997..6e1ede3 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -93,6 +93,10 @@
};
static struct module_pin_mux mmc1_pin_mux[] = {
+ {OFFSET(gpmc_ad7), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT7 */
+ {OFFSET(gpmc_ad6), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT6 */
+ {OFFSET(gpmc_ad5), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT5 */
+ {OFFSET(gpmc_ad4), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT4 */
{OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */
{OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT2 */
{OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT1 */
diff --git a/cmd/led.c b/cmd/led.c
index fc07ca9..403abbc 100644
--- a/cmd/led.c
+++ b/cmd/led.c
@@ -85,7 +85,7 @@
if (argc < 2)
return CMD_RET_USAGE;
led_label = argv[1];
- if (*led_label == 'l')
+ if (strncmp(led_label, "list", 4) == 0)
return list_leds();
cmd = argc > 2 ? get_led_cmd(argv[2]) : LEDST_COUNT;
@@ -137,6 +137,6 @@
led, 4, 1, do_led,
"manage LEDs",
"<led_label> on|off|toggle" BLINK "\tChange LED state\n"
- "led [<led_label>\tGet LED state\n"
+ "led [<led_label>]\tGet LED state\n"
"led list\t\tshow a list of LEDs"
);
diff --git a/configs/da850_am18xxevm_defconfig b/configs/da850_am18xxevm_defconfig
index f098222..7ecdc36 100644
--- a/configs/da850_am18xxevm_defconfig
+++ b/configs/da850_am18xxevm_defconfig
@@ -20,7 +20,6 @@
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_TEXT_BASE=0x80000000
-CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
index 8c16d5c..c095058 100644
--- a/configs/da850evm_defconfig
+++ b/configs/da850evm_defconfig
@@ -21,7 +21,6 @@
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_TEXT_BASE=0x80000000
-CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_SPI_LOAD=y
diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig
index b8eac0e..7271016 100644
--- a/configs/da850evm_nand_defconfig
+++ b/configs/da850evm_nand_defconfig
@@ -19,7 +19,6 @@
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_TEXT_BASE=0x80000000
-CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_NAND_SUPPORT=y
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index e431418..48f251e 100644
--- a/configs/omapl138_lcdk_defconfig
+++ b/configs/omapl138_lcdk_defconfig
@@ -18,7 +18,6 @@
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_TEXT_BASE=0x80000000
-CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h
index 1e239ec..36ca3b2 100644
--- a/include/configs/legoev3.h
+++ b/include/configs/legoev3.h
@@ -22,6 +22,7 @@
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
+#define CONFIG_SKIP_LOWLEVEL_INIT
/*
* Memory Info