Initial revision
diff --git a/drivers/sym53c8xx.c b/drivers/sym53c8xx.c
new file mode 100644
index 0000000..e03a049
--- /dev/null
+++ b/drivers/sym53c8xx.c
@@ -0,0 +1,799 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ * partly derived from
+ * linux/drivers/scsi/sym53c8xx.c
+ *
+ */
+
+/*
+ * SCSI support based on the chip sym53C810.
+ *
+ * 09-19-2001 Andreas Heppel, Sysgo RTS GmbH <aheppel@sysgo.de>
+ * The local version of this driver for the BAB750 board does not
+ * use interrupts but polls the chip instead (see the call of
+ * 'handle_scsi_int()' in 'scsi_issue()'.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_SCSI_SYM53C8XX
+
+#include <command.h>
+#include <cmd_boot.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <sym53c8xx.h>
+#include <scsi.h>
+
+#undef SYM53C8XX_DEBUG
+
+#ifdef SYM53C8XX_DEBUG
+#define PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_SCSI) && defined(CONFIG_SCSI_SYM53C8XX)
+
+#undef SCSI_SINGLE_STEP
+/*
+ * Single Step is only used for debug purposes
+ */
+#ifdef SCSI_SINGLE_STEP
+static unsigned long start_script_select;
+static unsigned long start_script_msgout;
+static unsigned long start_script_msgin;
+static unsigned long start_script_msg_ext;
+static unsigned long start_script_cmd;
+static unsigned long start_script_data_in;
+static unsigned long start_script_data_out;
+static unsigned long start_script_status;
+static unsigned long start_script_complete;
+static unsigned long start_script_error;
+static unsigned long start_script_reselection;
+static unsigned int len_script_select;
+static unsigned int len_script_msgout;
+static unsigned int len_script_msgin;
+static unsigned int len_script_msg_ext;
+static unsigned int len_script_cmd;
+static unsigned int len_script_data_in;
+static unsigned int len_script_data_out;
+static unsigned int len_script_status;
+static unsigned int len_script_complete;
+static unsigned int len_script_error;
+static unsigned int len_script_reselection;
+#endif
+
+
+static unsigned short scsi_int_mask; /* shadow register for SCSI related interrupts */
+static unsigned char script_int_mask; /* shadow register for SCRIPT related interrupts */
+static unsigned long script_select[8]; /* script for selection */
+static unsigned long script_msgout[8]; /* script for message out phase (NOT USED) */
+static unsigned long script_msgin[14]; /* script for message in phase */
+static unsigned long script_msg_ext[32]; /* script for message in phase when more than 1 byte message */
+static unsigned long script_cmd[18]; /* script for command phase */
+static unsigned long script_data_in[8]; /* script for data in phase */
+static unsigned long script_data_out[8]; /* script for data out phase */
+static unsigned long script_status[6]; /* script for status phase */
+static unsigned long script_complete[10]; /* script for complete */
+static unsigned long script_reselection[4]; /* script for reselection (NOT USED) */
+static unsigned long script_error[2]; /* script for error handling */
+
+static unsigned long int_stat[3]; /* interrupt status */
+static unsigned long scsi_mem_addr; /* base memory address =SCSI_MEM_ADDRESS; */
+
+#define bus_to_phys(a) pci_mem_to_phys(busdevfunc, (unsigned long) (a))
+#define phys_to_bus(a) pci_phys_to_mem(busdevfunc, (unsigned long) (a))
+
+#define SCSI_MAX_RETRY 3 /* number of retries in scsi_issue() */
+
+#define SCSI_MAX_RETRY_NOT_READY 10 /* number of retries when device is not ready */
+#define SCSI_NOT_READY_TIME_OUT 500 /* timeout per retry when not ready */
+
+/*********************************************************************************
+ * forward declerations
+ */
+
+void scsi_chip_init(void);
+void handle_scsi_int(void);
+
+
+/********************************************************************************
+ * reports SCSI errors to the user
+ */
+void scsi_print_error(ccb *pccb)
+{
+ int i;
+ printf("SCSI Error: Target %d LUN %d Command %02X\n",pccb->target, pccb->lun, pccb->cmd[0]);
+ printf(" CCB: ");
+ for(i=0;i<pccb->cmdlen;i++)
+ printf("%02X ",pccb->cmd[i]);
+ printf("(len=%d)\n",pccb->cmdlen);
+ printf(" Cntrl: ");
+ switch(pccb->contr_stat) {
+ case SIR_COMPLETE: printf("Complete (no Error)\n"); break;
+ case SIR_SEL_ATN_NO_MSG_OUT: printf("Selected with ATN no MSG out phase\n"); break;
+ case SIR_CMD_OUT_ILL_PH: printf("Command out illegal phase\n"); break;
+ case SIR_MSG_RECEIVED: printf("MSG received Error\n"); break;
+ case SIR_DATA_IN_ERR: printf("Data in Error\n"); break;
+ case SIR_DATA_OUT_ERR: printf("Data out Error\n"); break;
+ case SIR_SCRIPT_ERROR: printf("Script Error\n"); break;
+ case SIR_MSG_OUT_NO_CMD: printf("MSG out no Command phase\n"); break;
+ case SIR_MSG_OVER7: printf("MSG in over 7 bytes\n"); break;
+ case INT_ON_FY: printf("Interrupt on fly\n"); break;
+ case SCSI_SEL_TIME_OUT: printf("SCSI Selection Timeout\n"); break;
+ case SCSI_HNS_TIME_OUT: printf("SCSI Handshake Timeout\n"); break;
+ case SCSI_MA_TIME_OUT: printf("SCSI Phase Error\n"); break;
+ case SCSI_UNEXP_DIS: printf("SCSI unexpected disconnect\n"); break;
+ default: printf("unknown status %lx\n",pccb->contr_stat); break;
+ }
+ printf(" Sense: SK %x (",pccb->sense_buf[2]&0x0f);
+ switch(pccb->sense_buf[2]&0xf) {
+ case SENSE_NO_SENSE: printf("No Sense)"); break;
+ case SENSE_RECOVERED_ERROR: printf("Recovered Error)"); break;
+ case SENSE_NOT_READY: printf("Not Ready)"); break;
+ case SENSE_MEDIUM_ERROR: printf("Medium Error)"); break;
+ case SENSE_HARDWARE_ERROR: printf("Hardware Error)"); break;
+ case SENSE_ILLEGAL_REQUEST: printf("Illegal request)"); break;
+ case SENSE_UNIT_ATTENTION: printf("Unit Attention)"); break;
+ case SENSE_DATA_PROTECT: printf("Data Protect)"); break;
+ case SENSE_BLANK_CHECK: printf("Blank check)"); break;
+ case SENSE_VENDOR_SPECIFIC: printf("Vendor specific)"); break;
+ case SENSE_COPY_ABORTED: printf("Copy aborted)"); break;
+ case SENSE_ABORTED_COMMAND: printf("Aborted Command)"); break;
+ case SENSE_VOLUME_OVERFLOW: printf("Volume overflow)"); break;
+ case SENSE_MISCOMPARE: printf("Misscompare\n"); break;
+ default: printf("Illegal Sensecode\n"); break;
+ }
+ printf(" ASC %x ASCQ %x\n",pccb->sense_buf[12],pccb->sense_buf[13]);
+ printf(" Status: ");
+ switch(pccb->status) {
+ case S_GOOD : printf("Good\n"); break;
+ case S_CHECK_COND: printf("Check condition\n"); break;
+ case S_COND_MET: printf("Condition Met\n"); break;
+ case S_BUSY: printf("Busy\n"); break;
+ case S_INT: printf("Intermediate\n"); break;
+ case S_INT_COND_MET: printf("Intermediate condition met\n"); break;
+ case S_CONFLICT: printf("Reservation conflict\n"); break;
+ case S_TERMINATED: printf("Command terminated\n"); break;
+ case S_QUEUE_FULL: printf("Task set full\n"); break;
+ default: printf("unknown: %02X\n",pccb->status); break;
+ }
+
+}
+
+
+
+/******************************************************************************
+ * sets-up the SCSI controller
+ * the base memory address is retrived via the pci_read_config_dword
+ */
+void scsi_low_level_init(int busdevfunc)
+{
+ unsigned int cmd;
+ unsigned int addr;
+ unsigned char vec;
+
+ pci_read_config_byte(busdevfunc, PCI_INTERRUPT_LINE, &vec);
+ pci_read_config_dword(busdevfunc, PCI_BASE_ADDRESS_1, &addr);
+
+ addr = bus_to_phys(addr & ~0xf);
+
+ /*
+ * Enable bus mastering in case this has not been done, yet.
+ */
+ pci_read_config_dword(busdevfunc, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER;
+ pci_write_config_dword(busdevfunc, PCI_COMMAND, cmd);
+
+ scsi_mem_addr = addr;
+
+ scsi_chip_init();
+ scsi_bus_reset();
+}
+
+
+/************************************************************************************
+ * Low level Part of SCSI Driver
+ */
+
+/*
+ * big-endian -> little endian conversion for the script
+ */
+unsigned long swap_script(unsigned long val)
+{
+ unsigned long tmp;
+ tmp = ((val>>24)&0xff) | ((val>>8)&0xff00) | ((val<<8)&0xff0000) | ((val<<24)&0xff000000);
+ return tmp;
+}
+
+
+void scsi_write_byte(ulong offset,unsigned char val)
+{
+ out8(scsi_mem_addr+offset,val);
+}
+
+
+unsigned char scsi_read_byte(ulong offset)
+{
+ return(in8(scsi_mem_addr+offset));
+}
+
+
+/********************************************************************************
+ * interrupt handler
+ */
+void handle_scsi_int(void)
+{
+ unsigned char stat,stat1,stat2;
+ unsigned short sstat;
+ int i;
+#ifdef SCSI_SINGLE_STEP
+ unsigned long tt;
+#endif
+ stat=scsi_read_byte(ISTAT);
+ if((stat & DIP)==DIP) { /* DMA Interrupt pending */
+ stat1=scsi_read_byte(DSTAT);
+#ifdef SCSI_SINGLE_STEP
+ if((stat1 & SSI)==SSI)
+ {
+ tt=in32r(scsi_mem_addr+DSP);
+ if(((tt)>=start_script_select) && ((tt)<start_script_select+len_script_select)) {
+ printf("select %d\n",(tt-start_script_select)>>2);
+ goto end_single;
+ }
+ if(((tt)>=start_script_msgout) && ((tt)<start_script_msgout+len_script_msgout)) {
+ printf("msgout %d\n",(tt-start_script_msgout)>>2);
+ goto end_single;
+ }
+ if(((tt)>=start_script_msgin) && ((tt)<start_script_msgin+len_script_msgin)) {
+ printf("msgin %d\n",(tt-start_script_msgin)>>2);
+ goto end_single;
+ }
+ if(((tt)>=start_script_msg_ext) && ((tt)<start_script_msg_ext+len_script_msg_ext)) {
+ printf("msgin_ext %d\n",(tt-start_script_msg_ext)>>2);
+ goto end_single;
+ }
+ if(((tt)>=start_script_cmd) && ((tt)<start_script_cmd+len_script_cmd)) {
+ printf("cmd %d\n",(tt-start_script_cmd)>>2);
+ goto end_single;
+ }
+ if(((tt)>=start_script_data_in) && ((tt)<start_script_data_in+len_script_data_in)) {
+ printf("data_in %d\n",(tt-start_script_data_in)>>2);
+ goto end_single;
+ }
+ if(((tt)>=start_script_data_out) && ((tt)<start_script_data_out+len_script_data_out)) {
+ printf("data_out %d\n",(tt-start_script_data_out)>>2);
+ goto end_single;
+ }
+ if(((tt)>=start_script_status) && ((tt)<start_script_status+len_script_status)) {
+ printf("status %d\n",(tt-start_script_status)>>2);
+ goto end_single;
+ }
+ if(((tt)>=start_script_complete) && ((tt)<start_script_complete+len_script_complete)) {
+ printf("complete %d\n",(tt-start_script_complete)>>2);
+ goto end_single;
+ }
+ if(((tt)>=start_script_error) && ((tt)<start_script_error+len_script_error)) {
+ printf("error %d\n",(tt-start_script_error)>>2);
+ goto end_single;
+ }
+ if(((tt)>=start_script_reselection) && ((tt)<start_script_reselection+len_script_reselection)) {
+ printf("reselection %d\n",(tt-start_script_reselection)>>2);
+ goto end_single;
+ }
+ printf("sc: %lx\n",tt);
+end_single:
+ stat2=scsi_read_byte(DCNTL);
+ stat2|=STD;
+ scsi_write_byte(DCNTL,stat2);
+ }
+#endif
+ if((stat1 & SIR)==SIR) /* script interrupt */
+ {
+ int_stat[0]=in32(scsi_mem_addr+DSPS);
+ }
+ if((stat1 & DFE)==0) { /* fifo not epmty */
+ scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */
+ stat2=scsi_read_byte(STEST3);
+ scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */
+ }
+ }
+ if((stat & SIP)==SIP) { /* scsi interrupt */
+ sstat = (unsigned short)scsi_read_byte(SIST+1);
+ sstat <<=8;
+ sstat |= (unsigned short)scsi_read_byte(SIST);
+ for(i=0;i<3;i++) {
+ if(int_stat[i]==0)
+ break; /* found an empty int status */
+ }
+ int_stat[i]=SCSI_INT_STATE | sstat;
+ stat1=scsi_read_byte(DSTAT);
+ if((stat1 & DFE)==0) { /* fifo not epmty */
+ scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */
+ stat2=scsi_read_byte(STEST3);
+ scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */
+ }
+ }
+ if((stat & INTF)==INTF) { /* interrupt on Fly */
+ scsi_write_byte(ISTAT,stat); /* clear it */
+ for(i=0;i<3;i++) {
+ if(int_stat[i]==0)
+ break; /* found an empty int status */
+ }
+ int_stat[i]=INT_ON_FY;
+ }
+}
+
+void scsi_bus_reset(void)
+{
+ unsigned char t;
+ int i;
+ int end = CFG_SCSI_SPIN_UP_TIME*1000;
+
+ t=scsi_read_byte(SCNTL1);
+ scsi_write_byte(SCNTL1,(t | CRST));
+ udelay(50);
+ scsi_write_byte(SCNTL1,t);
+
+ puts("waiting for devices to spin up");
+ for(i=0;i<end;i++) {
+ udelay(1000); /* give the devices time to spin up */
+ if (i % 1000 == 0)
+ putc('.');
+ }
+ putc('\n');
+ scsi_chip_init(); /* reinit the chip ...*/
+
+}
+
+void scsi_int_enable(void)
+{
+ scsi_write_byte(SIEN,(unsigned char)scsi_int_mask);
+ scsi_write_byte(SIEN+1,(unsigned char)(scsi_int_mask>>8));
+ scsi_write_byte(DIEN,script_int_mask);
+}
+
+void scsi_write_dsp(unsigned long start)
+{
+ unsigned long val;
+#ifdef SCSI_SINGLE_STEP
+ unsigned char t;
+#endif
+ val = start;
+ out32r(scsi_mem_addr + DSP,start);
+#ifdef SCSI_SINGLE_STEP
+ t=scsi_read_byte(DCNTL);
+ t|=STD;
+ scsi_write_byte(DCNTL,t);
+#endif
+}
+
+/* only used for debug purposes */
+void scsi_print_script(void)
+{
+ printf("script_select @ 0x%08lX\n",(unsigned long)&script_select[0]);
+ printf("script_msgout @ 0x%08lX\n",(unsigned long)&script_msgout[0]);
+ printf("script_msgin @ 0x%08lX\n",(unsigned long)&script_msgin[0]);
+ printf("script_msgext @ 0x%08lX\n",(unsigned long)&script_msg_ext[0]);
+ printf("script_cmd @ 0x%08lX\n",(unsigned long)&script_cmd[0]);
+ printf("script_data_in @ 0x%08lX\n",(unsigned long)&script_data_in[0]);
+ printf("script_data_out @ 0x%08lX\n",(unsigned long)&script_data_out[0]);
+ printf("script_status @ 0x%08lX\n",(unsigned long)&script_status[0]);
+ printf("script_complete @ 0x%08lX\n",(unsigned long)&script_complete[0]);
+ printf("script_error @ 0x%08lX\n",(unsigned long)&script_error[0]);
+}
+
+
+
+void scsi_set_script(ccb *pccb)
+{
+ int busdevfunc = pccb->priv;
+ int i;
+ i=0;
+ script_select[i++]=swap_script(SCR_REG_REG(GPREG, SCR_AND, 0xfe));
+ script_select[i++]=0; /* LED ON */
+ script_select[i++]=swap_script(SCR_CLR(SCR_TRG)); /* select initiator mode */
+ script_select[i++]=0;
+ /* script_select[i++]=swap_script(SCR_SEL_ABS_ATN | pccb->target << 16); */
+ script_select[i++]=swap_script(SCR_SEL_ABS | pccb->target << 16);
+ script_select[i++]=swap_script(phys_to_bus(&script_cmd[4])); /* error handling */
+ script_select[i++]=swap_script(SCR_JUMP); /* next section */
+ /* script_select[i++]=swap_script((unsigned long)&script_msgout[0]); */ /* message out */
+ script_select[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* command out */
+
+#ifdef SCSI_SINGLE_STEP
+ start_script_select=(unsigned long)&script_select[0];
+ len_script_select=i*4;
+#endif
+
+ i=0;
+ script_msgout[i++]=swap_script(SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT)));
+ script_msgout[i++]=SIR_SEL_ATN_NO_MSG_OUT;
+ script_msgout[i++]=swap_script( SCR_MOVE_ABS(1) ^ SCR_MSG_OUT);
+ script_msgout[i++]=swap_script(phys_to_bus(&pccb->msgout[0]));
+ script_msgout[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_COMMAND))); /* if Command phase */
+ script_msgout[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* switch to command */
+ script_msgout[i++]=swap_script(SCR_INT); /* interrupt if not */
+ script_msgout[i++]=SIR_MSG_OUT_NO_CMD;
+
+#ifdef SCSI_SINGLE_STEP
+ start_script_msgout=(unsigned long)&script_msgout[0];
+ len_script_msgout=i*4;
+#endif
+ i=0;
+ script_cmd[i++]=swap_script(SCR_MOVE_ABS(pccb->cmdlen) ^ SCR_COMMAND);
+ script_cmd[i++]=swap_script(phys_to_bus(&pccb->cmd[0]));
+ script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN))); /* message in ? */
+ script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0]));
+ script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_OUT))); /* data out ? */
+ script_cmd[i++]=swap_script(phys_to_bus(&script_data_out[0]));
+ script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_IN))); /* data in ? */
+ script_cmd[i++]=swap_script(phys_to_bus(&script_data_in[0]));
+ script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_STATUS))); /* status ? */
+ script_cmd[i++]=swap_script(phys_to_bus(&script_status[0]));
+ script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND))); /* command ? */
+ script_cmd[i++]=swap_script(phys_to_bus(&script_cmd[0]));
+ script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT))); /* message out ? */
+ script_cmd[i++]=swap_script(phys_to_bus(&script_msgout[0]));
+ script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_IN))); /* just for error handling message in ? */
+ script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0]));
+ script_cmd[i++]=swap_script(SCR_INT); /* interrupt if not */
+ script_cmd[i++]=SIR_CMD_OUT_ILL_PH;
+#ifdef SCSI_SINGLE_STEP
+ start_script_cmd=(unsigned long)&script_cmd[0];
+ len_script_cmd=i*4;
+#endif
+ i=0;
+ script_data_out[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_OUT); /* move */
+ script_data_out[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */
+ script_data_out[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS)));
+ script_data_out[i++]=swap_script(phys_to_bus(&script_status[0]));
+ script_data_out[i++]=swap_script(SCR_INT);
+ script_data_out[i++]=SIR_DATA_OUT_ERR;
+
+#ifdef SCSI_SINGLE_STEP
+ start_script_data_out=(unsigned long)&script_data_out[0];
+ len_script_data_out=i*4;
+#endif
+ i=0;
+ script_data_in[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_IN); /* move */
+ script_data_in[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */
+ script_data_in[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS)));
+ script_data_in[i++]=swap_script(phys_to_bus(&script_status[0]));
+ script_data_in[i++]=swap_script(SCR_INT);
+ script_data_in[i++]=SIR_DATA_IN_ERR;
+#ifdef SCSI_SINGLE_STEP
+ start_script_data_in=(unsigned long)&script_data_in[0];
+ len_script_data_in=i*4;
+#endif
+ i=0;
+ script_msgin[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN);
+ script_msgin[i++]=swap_script(phys_to_bus(&pccb->msgin[0]));
+ script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE)));
+ script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0]));
+ script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT)));
+ script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0]));
+ script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP)));
+ script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0]));
+ script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP)));
+ script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0]));
+ script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED)));
+ script_msgin[i++]=swap_script(phys_to_bus(&script_msg_ext[0]));
+ script_msgin[i++]=swap_script(SCR_INT);
+ script_msgin[i++]=SIR_MSG_RECEIVED;
+#ifdef SCSI_SINGLE_STEP
+ start_script_msgin=(unsigned long)&script_msgin[0];
+ len_script_msgin=i*4;
+#endif
+ i=0;
+ script_msg_ext[i++]=swap_script(SCR_CLR (SCR_ACK)); /* clear ACK */
+ script_msg_ext[i++]=0;
+ script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* assuming this is the msg length */
+ script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[1]));
+ script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+ script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+ script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
+ script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[2]));
+ script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+ script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+ script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
+ script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[3]));
+ script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+ script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+ script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
+ script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[4]));
+ script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+ script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+ script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
+ script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[5]));
+ script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+ script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+ script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
+ script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[6]));
+ script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+ script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+ script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
+ script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[7]));
+ script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+ script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+ script_msg_ext[i++]=swap_script(SCR_INT);
+ script_msg_ext[i++]=SIR_MSG_OVER7;
+#ifdef SCSI_SINGLE_STEP
+ start_script_msg_ext=(unsigned long)&script_msg_ext[0];
+ len_script_msg_ext=i*4;
+#endif
+ i=0;
+ script_status[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_STATUS);
+ script_status[i++]=swap_script(phys_to_bus(&pccb->status));
+ script_status[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)));
+ script_status[i++]=swap_script(phys_to_bus(&script_msgin[0]));
+ script_status[i++]=swap_script(SCR_INT);
+ script_status[i++]=SIR_STATUS_ILL_PH;
+#ifdef SCSI_SINGLE_STEP
+ start_script_status=(unsigned long)&script_status[0];
+ len_script_status=i*4;
+#endif
+ i=0;
+ script_complete[i++]=swap_script(SCR_REG_REG (SCNTL2, SCR_AND, 0x7f));
+ script_complete[i++]=0;
+ script_complete[i++]=swap_script(SCR_CLR (SCR_ACK|SCR_ATN));
+ script_complete[i++]=0;
+ script_complete[i++]=swap_script(SCR_WAIT_DISC);
+ script_complete[i++]=0;
+ script_complete[i++]=swap_script(SCR_REG_REG(GPREG, SCR_OR, 0x01));
+ script_complete[i++]=0; /* LED OFF */
+ script_complete[i++]=swap_script(SCR_INT);
+ script_complete[i++]=SIR_COMPLETE;
+#ifdef SCSI_SINGLE_STEP
+ start_script_complete=(unsigned long)&script_complete[0];
+ len_script_complete=i*4;
+#endif
+ i=0;
+ script_error[i++]=swap_script(SCR_INT); /* interrupt if error */
+ script_error[i++]=SIR_SCRIPT_ERROR;
+#ifdef SCSI_SINGLE_STEP
+ start_script_error=(unsigned long)&script_error[0];
+ len_script_error=i*4;
+#endif
+ i=0;
+ script_reselection[i++]=swap_script(SCR_CLR (SCR_TRG)); /* target status */
+ script_reselection[i++]=0;
+ script_reselection[i++]=swap_script(SCR_WAIT_RESEL);
+ script_reselection[i++]=swap_script(phys_to_bus(&script_select[0])); /* len = 4 */
+#ifdef SCSI_SINGLE_STEP
+ start_script_reselection=(unsigned long)&script_reselection[0];
+ len_script_reselection=i*4;
+#endif
+}
+
+
+
+void scsi_issue(ccb *pccb)
+{
+ int busdevfunc = pccb->priv;
+ int i;
+ unsigned short sstat;
+ int retrycnt; /* retry counter */
+ for(i=0;i<3;i++)
+ int_stat[i]=0; /* delete all int status */
+ /* struct pccb must be set-up correctly */
+ retrycnt=0;
+ PRINTF("ID %d issue cmd %02X\n",pccb->target,pccb->cmd[0]);
+ pccb->trans_bytes=0; /* no bytes transfered yet */
+ scsi_set_script(pccb); /* fill in SCRIPT */
+ scsi_int_mask=STO | UDC | MA; /* | CMP; / * Interrupts which are enabled */
+ script_int_mask=0xff; /* enable all Ints */
+ scsi_int_enable();
+ scsi_write_dsp(phys_to_bus(&script_select[0])); /* start script */
+ /* now we have to wait for IRQs */
+retry:
+ /*
+ * This version of the driver is _not_ interrupt driven,
+ * but polls the chip's interrupt registers (ISTAT, DSTAT).
+ */
+ while(int_stat[0]==0)
+ handle_scsi_int();
+
+ if(int_stat[0]==SIR_COMPLETE) {
+ if(pccb->msgin[0]==M_DISCONNECT) {
+ PRINTF("Wait for reselection\n");
+ for(i=0;i<3;i++)
+ int_stat[i]=0; /* delete all int status */
+ scsi_write_dsp(phys_to_bus(&script_reselection[0])); /* start reselection script */
+ goto retry;
+ }
+ pccb->contr_stat=SIR_COMPLETE;
+ return;
+ }
+ if((int_stat[0] & SCSI_INT_STATE)==SCSI_INT_STATE) { /* scsi interrupt */
+ sstat=(unsigned short)int_stat[0];
+ if((sstat & STO)==STO) { /* selection timeout */
+ pccb->contr_stat=SCSI_SEL_TIME_OUT;
+ scsi_write_byte(GPREG,0x01);
+ PRINTF("ID: %X Selection Timeout\n",pccb->target);
+ return;
+ }
+ if((sstat & UDC)==UDC) { /* unexpected disconnect */
+ pccb->contr_stat=SCSI_UNEXP_DIS;
+ scsi_write_byte(GPREG,0x01);
+ PRINTF("ID: %X Unexpected Disconnect\n",pccb->target);
+ return;
+ }
+ if((sstat & RSL)==RSL) { /* reselection */
+ pccb->contr_stat=SCSI_UNEXP_DIS;
+ scsi_write_byte(GPREG,0x01);
+ PRINTF("ID: %X Unexpected Disconnect\n",pccb->target);
+ return;
+ }
+ if(((sstat & MA)==MA)||((sstat & HTH)==HTH)) { /* phase missmatch */
+ if(retrycnt<SCSI_MAX_RETRY) {
+ pccb->trans_bytes=pccb->datalen -
+ ((unsigned long)scsi_read_byte(DBC) |
+ ((unsigned long)scsi_read_byte(DBC+1)<<8) |
+ ((unsigned long)scsi_read_byte(DBC+2)<<16));
+ for(i=0;i<3;i++)
+ int_stat[i]=0; /* delete all int status */
+ retrycnt++;
+ PRINTF("ID: %X Phase Missmatch Retry %d Phase %02X transfered %lx\n",
+ pccb->target,retrycnt,scsi_read_byte(SBCL),pccb->trans_bytes);
+ scsi_write_dsp(phys_to_bus(&script_cmd[4])); /* start retry script */
+ goto retry;
+ }
+ if((sstat & MA)==MA)
+ pccb->contr_stat=SCSI_MA_TIME_OUT;
+ else
+ pccb->contr_stat=SCSI_HNS_TIME_OUT;
+ PRINTF("Phase Missmatch stat %lx\n",pccb->contr_stat);
+ return;
+ } /* no phase int */
+/* if((sstat & CMP)==CMP) {
+ pccb->contr_stat=SIR_COMPLETE;
+ return;
+ }
+*/
+ PRINTF("SCSI INT %lX\n",int_stat[0]);
+ pccb->contr_stat=int_stat[0];
+ return;
+ } /* end scsi int */
+ PRINTF("SCRIPT INT %lX phase %02X\n",int_stat[0],scsi_read_byte(SBCL));
+ pccb->contr_stat=int_stat[0];
+ return;
+}
+
+int scsi_exec(ccb *pccb)
+{
+ unsigned char tmpcmd[16],tmpstat;
+ int i,retrycnt,t;
+ unsigned long transbytes,datalen;
+ unsigned char *tmpptr;
+ retrycnt=0;
+retry:
+ scsi_issue(pccb);
+ if(pccb->contr_stat!=SIR_COMPLETE)
+ return FALSE;
+ if(pccb->status==S_GOOD)
+ return TRUE;
+ if(pccb->status==S_CHECK_COND) { /* check condition */
+ for(i=0;i<16;i++)
+ tmpcmd[i]=pccb->cmd[i];
+ pccb->cmd[0]=SCSI_REQ_SENSE;
+ pccb->cmd[1]=pccb->lun<<5;
+ pccb->cmd[2]=0;
+ pccb->cmd[3]=0;
+ pccb->cmd[4]=14;
+ pccb->cmd[5]=0;
+ pccb->cmdlen=6;
+ pccb->msgout[0]=SCSI_IDENTIFY;
+ transbytes=pccb->trans_bytes;
+ tmpptr=pccb->pdata;
+ pccb->pdata=&pccb->sense_buf[0];
+ datalen=pccb->datalen;
+ pccb->datalen=14;
+ tmpstat=pccb->status;
+ scsi_issue(pccb);
+ for(i=0;i<16;i++)
+ pccb->cmd[i]=tmpcmd[i];
+ pccb->trans_bytes=transbytes;
+ pccb->pdata=tmpptr;
+ pccb->datalen=datalen;
+ pccb->status=tmpstat;
+ PRINTF("Request_sense sense key %x ASC %x ASCQ %x\n",pccb->sense_buf[2]&0x0f,
+ pccb->sense_buf[12],pccb->sense_buf[13]);
+ switch(pccb->sense_buf[2]&0xf) {
+ case SENSE_NO_SENSE:
+ case SENSE_RECOVERED_ERROR:
+ /* seems to be ok */
+ return TRUE;
+ break;
+ case SENSE_NOT_READY:
+ if((pccb->sense_buf[12]!=0x04)||(pccb->sense_buf[13]!=0x01)) {
+ /* if device is not in process of becoming ready */
+ return FALSE;
+ break;
+ } /* else fall through */
+ case SENSE_UNIT_ATTENTION:
+ if(retrycnt<SCSI_MAX_RETRY_NOT_READY) {
+ PRINTF("Target %d not ready, retry %d\n",pccb->target,retrycnt);
+ for(t=0;t<SCSI_NOT_READY_TIME_OUT;t++)
+ udelay(1000); /* 1sec wait */
+ retrycnt++;
+ goto retry;
+ }
+ PRINTF("Target %d not ready, %d retried\n",pccb->target,retrycnt);
+ return FALSE;
+ default:
+ return FALSE;
+ }
+ }
+ PRINTF("Status = %X\n",pccb->status);
+ return FALSE;
+}
+
+
+
+
+void scsi_chip_init(void)
+{
+ /* first we issue a soft reset */
+ scsi_write_byte(ISTAT,SRST);
+ udelay(1000);
+ scsi_write_byte(ISTAT,0);
+ /* setup chip */
+ scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */
+ scsi_write_byte(SCNTL1,0x00);
+ scsi_write_byte(SCNTL2,0x00);
+#ifndef CFG_SCSI_SYM53C8XX_CCF /* config value for none 40 mhz clocks */
+ scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */
+#else
+ scsi_write_byte(SCNTL3,CFG_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */
+#endif
+ scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */
+ scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */
+ scsi_write_byte(SDID,0x00); /* targed SCSI ID = 0 */
+ scsi_int_mask=0x0000; /* no Interrupt is enabled */
+ script_int_mask=0x00;
+ scsi_int_enable();
+ scsi_write_byte(GPREG,0x01); /* GPIO0 is LED (off) */
+ scsi_write_byte(GPCNTL,0x0E); /* GPIO0 is Output */
+ scsi_write_byte(STIME0,0x08); /* handshake timer disabled, selection timeout 512msec */
+ scsi_write_byte(RESPID,0x80); /* repond only to the own ID (reselection) */
+ scsi_write_byte(STEST1,0x00); /* not isolated, SCLK is used */
+ scsi_write_byte(STEST2,0x00); /* no Lowlevel Mode? */
+ scsi_write_byte(STEST3,0x80); /* enable tolerANT */
+ scsi_write_byte(CTEST3,0x04); /* clear FIFO */
+ scsi_write_byte(CTEST4,0x00);
+ scsi_write_byte(CTEST5,0x00);
+#ifdef SCSI_SINGLE_STEP
+/* scsi_write_byte(DCNTL,IRQM | SSM); */
+ scsi_write_byte(DCNTL,IRQD | SSM);
+ scsi_write_byte(DMODE,MAN);
+#else
+/* scsi_write_byte(DCNTL,IRQM); */
+ scsi_write_byte(DCNTL,IRQD);
+ scsi_write_byte(DMODE,0x00);
+#endif
+}
+#endif /* (CONFIG_COMMANDS & CFG_CMD_SCSI) */
+
+
+#endif /* CONFIG_SCSI_SYM53C8XX */