arm: dts: u8500: Update from Linux ux500-dts-for-v5.15
Update ste-dbx5x0.dtsi, ste-ab8500.dtsi and ste-ab8505.dtsi with
the changes made in upstream Linux. They are taken from
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git/
branch "ux500-dts-for-v5.15" (pending merge for Linux 5.15).
The only relevant change for U-Boot here is
"ARM: dts: ux500: ab8500: Link USB PHY to USB controller node" [1]
which links the USB PHY to the USB controller. This is necessary on
U-Boot because the PHY driver is implemented as part of the generic
PHY subsystem that makes use of these bindings.
[1]: https://lore.kernel.org/linux-arm-kernel/20210709182234.47232-1-stephan@gerhold.net/
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
diff --git a/arch/arm/dts/ste-dbx5x0.dtsi b/arch/arm/dts/ste-dbx5x0.dtsi
index 6671f74..68607e4 100644
--- a/arch/arm/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/dts/ste-dbx5x0.dtsi
@@ -260,7 +260,7 @@
reg = <0x80150000 0x2000>;
};
- L2: l2-cache {
+ L2: cache-controller {
compatible = "arm,pl310-cache";
reg = <0xa0412000 0x1000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -883,7 +883,7 @@
status = "disabled";
};
- sdi0_per1@80126000 {
+ mmc@80126000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
@@ -899,7 +899,7 @@
status = "disabled";
};
- sdi1_per2@80118000 {
+ mmc@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
@@ -915,7 +915,7 @@
status = "disabled";
};
- sdi2_per3@80005000 {
+ mmc@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
@@ -931,7 +931,7 @@
status = "disabled";
};
- sdi3_per2@80119000 {
+ mmc@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
@@ -947,7 +947,7 @@
status = "disabled";
};
- sdi4_per2@80114000 {
+ mmc@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
@@ -963,7 +963,7 @@
status = "disabled";
};
- sdi5_per3@80008000 {
+ mmc@80008000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80008000 0x1000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;