sh: add support for sh7752evb board

The R0P7752C00000RZ board has SH7752, 512MB DDR3-SDRAM, SPI ROM,
Gigabit Ethernet, and eMMC.

This patch supports the following functions:
 - 512MB DDR3-SDRAM, SCIF4, SPI ROM, Gigabit Ethernet, eMMC

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/board/renesas/sh7752evb/lowlevel_init.S b/board/renesas/sh7752evb/lowlevel_init.S
new file mode 100644
index 0000000..73c8ac4
--- /dev/null
+++ b/board/renesas/sh7752evb/lowlevel_init.S
@@ -0,0 +1,460 @@
+/*
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+#include <asm/macro.h>
+
+.macro	or32, addr, data
+	mov.l \addr, r1
+	mov.l \data, r0
+	mov.l @r1, r2
+	or    r2, r0
+	mov.l r0, @r1
+.endm
+
+.macro	wait_DBCMD
+	mov.l	DBWAIT_A, r0
+	mov.l	@r0, r1
+.endm
+
+	.global lowlevel_init
+	.section	.spiboot1.text
+	.align  2
+
+lowlevel_init:
+	/*------- GPIO -------*/
+	write16 PDCR_A,	PDCR_D		! SPI0
+	write16 PGCR_A,	PGCR_D		! SPI0, GETHER MDIO gate(PTG1)
+	write16 PJCR_A,	PJCR_D		! SCIF4
+	write16 PTCR_A,	PTCR_D		! STATUS
+	write16 PSEL1_A, PSEL1_D	! SPI0
+	write16 PSEL2_A, PSEL2_D	! SPI0
+	write16 PSEL5_A, PSEL5_D	! STATUS
+
+	bra	exit_gpio
+	nop
+
+	.align	2
+
+/*------- GPIO -------*/
+PDCR_A:		.long	0xffec0006
+PGCR_A:		.long	0xffec000c
+PJCR_A:		.long	0xffec0012
+PTCR_A:		.long	0xffec0026
+PSEL1_A:	.long	0xffec0072
+PSEL2_A:	.long	0xffec0074
+PSEL5_A:	.long	0xffec007a
+
+PDCR_D:		.long	0x0000
+PGCR_D:		.long	0x0004
+PJCR_D:		.long	0x0000
+PTCR_D:		.long	0x0000
+PSEL1_D:	.long	0x0000
+PSEL2_D:	.long	0x3000
+PSEL5_D:	.long	0x0ffc
+
+	.align	2
+
+exit_gpio:
+	mov	#0, r14
+	mova	2f, r0
+	mov.l	PC_MASK, r1
+	tst	r0, r1
+	bf	2f
+
+	bra	exit_pmb
+	nop
+
+	.align	2
+
+/* If CPU runs on SDRAM (PC=0x5???????) or not. */
+PC_MASK:	.long	0x20000000
+
+2:
+	mov	#1, r14
+
+	mov.l	EXPEVT_A, r0
+	mov.l	@r0, r0
+	mov.l	EXPEVT_POWER_ON_RESET, r1
+	cmp/eq	r0, r1
+	bt	1f
+
+	/*
+	 * If EXPEVT value is manual reset or tlb multipul-hit,
+	 * initialization of DDR3IF is not necessary.
+	 */
+	bra	exit_ddr
+	nop
+
+1:
+	/*------- Reset -------*/
+	write32 MRSTCR0_A, MRSTCR0_D
+	write32 MRSTCR1_A, MRSTCR1_D
+
+	/* For Core Reset */
+	mov.l	DBACEN_A, r0
+	mov.l	@r0, r0
+	cmp/eq	#0, r0
+	bt	3f
+
+	/*
+	 * If DBACEN == 1(DBSC was already enabled), we have to avoid the
+	 * initialization of DDR3-SDRAM.
+	 */
+	bra	exit_ddr
+	nop
+
+3:
+	/*------- DDR3IF -------*/
+	/* oscillation stabilization time */
+	wait_timer	WAIT_OSC_TIME
+
+	/* step 3 */
+	write32 DBCMD_A, DBCMD_RSTL_VAL
+	wait_timer	WAIT_30US
+
+	/* step 4 */
+	write32 DBCMD_A, DBCMD_PDEN_VAL
+
+	/* step 5 */
+	write32 DBKIND_A, DBKIND_D
+
+	/* step 6 */
+	write32 DBCONF_A, DBCONF_D
+	write32 DBTR0_A, DBTR0_D
+	write32 DBTR1_A, DBTR1_D
+	write32 DBTR2_A, DBTR2_D
+	write32 DBTR3_A, DBTR3_D
+	write32 DBTR4_A, DBTR4_D
+	write32 DBTR5_A, DBTR5_D
+	write32 DBTR6_A, DBTR6_D
+	write32 DBTR7_A, DBTR7_D
+	write32 DBTR8_A, DBTR8_D
+	write32 DBTR9_A, DBTR9_D
+	write32 DBTR10_A, DBTR10_D
+	write32 DBTR11_A, DBTR11_D
+	write32 DBTR12_A, DBTR12_D
+	write32 DBTR13_A, DBTR13_D
+	write32 DBTR14_A, DBTR14_D
+	write32 DBTR15_A, DBTR15_D
+	write32 DBTR16_A, DBTR16_D
+	write32 DBTR17_A, DBTR17_D
+	write32 DBTR18_A, DBTR18_D
+	write32 DBTR19_A, DBTR19_D
+	write32 DBRNK0_A, DBRNK0_D
+
+	/* step 7 */
+	write32 DBPDCNT3_A, DBPDCNT3_D
+
+	/* step 8 */
+	write32 DBPDCNT1_A, DBPDCNT1_D
+	write32 DBPDCNT2_A, DBPDCNT2_D
+	write32 DBPDLCK_A, DBPDLCK_D
+	write32 DBPDRGA_A, DBPDRGA_D
+	write32 DBPDRGD_A, DBPDRGD_D
+
+	/* step 9 */
+	wait_timer	WAIT_30US
+
+	/* step 10 */
+	write32 DBPDCNT0_A, DBPDCNT0_D
+
+	/* step 11 */
+	wait_timer	WAIT_30US
+	wait_timer	WAIT_30US
+
+	/* step 12 */
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+	wait_DBCMD
+
+	/* step 13 */
+	write32 DBCMD_A, DBCMD_RSTH_VAL
+	wait_DBCMD
+
+	/* step 14 */
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+
+	/* step 15 */
+	write32 DBCMD_A, DBCMD_PDXT_VAL
+
+	/* step 16 */
+	write32 DBCMD_A, DBCMD_MRS2_VAL
+
+	/* step 17 */
+	write32 DBCMD_A, DBCMD_MRS3_VAL
+
+	/* step 18 */
+	write32 DBCMD_A, DBCMD_MRS1_VAL
+
+	/* step 19 */
+	write32 DBCMD_A, DBCMD_MRS0_VAL
+
+	/* step 20 */
+	write32 DBCMD_A, DBCMD_ZQCL_VAL
+
+	write32 DBCMD_A, DBCMD_REF_VAL
+	write32 DBCMD_A, DBCMD_REF_VAL
+	wait_DBCMD
+
+	/* step 21 */
+	write32 DBADJ0_A, DBADJ0_D
+	write32 DBADJ1_A, DBADJ1_D
+	write32 DBADJ2_A, DBADJ2_D
+
+	/* step 22 */
+	write32 DBRFCNF0_A, DBRFCNF0_D
+	write32 DBRFCNF1_A, DBRFCNF1_D
+	write32 DBRFCNF2_A, DBRFCNF2_D
+
+	/* step 23 */
+	write32 DBCALCNF_A, DBCALCNF_D
+
+	/* step 24 */
+	write32 DBRFEN_A, DBRFEN_D
+	write32 DBCMD_A, DBCMD_SRXT_VAL
+
+	/* step 25 */
+	write32 DBACEN_A, DBACEN_D
+
+	/* step 26 */
+	wait_DBCMD
+
+	bra	exit_ddr
+	nop
+
+	.align 2
+
+EXPEVT_A:		.long	0xff000024
+EXPEVT_POWER_ON_RESET:	.long	0x00000000
+
+/*------- Reset -------*/
+MRSTCR0_A:	.long	0xffd50030
+MRSTCR0_D:	.long	0xfe1ffe7f
+MRSTCR1_A:	.long	0xffd50034
+MRSTCR1_D:	.long	0xfff3ffff
+
+/*------- DDR3IF -------*/
+DBCMD_A:	.long	0xfe800018
+DBKIND_A:	.long	0xfe800020
+DBCONF_A:	.long	0xfe800024
+DBTR0_A:	.long	0xfe800040
+DBTR1_A:	.long	0xfe800044
+DBTR2_A:	.long	0xfe800048
+DBTR3_A:	.long	0xfe800050
+DBTR4_A:	.long	0xfe800054
+DBTR5_A:	.long	0xfe800058
+DBTR6_A:	.long	0xfe80005c
+DBTR7_A:	.long	0xfe800060
+DBTR8_A:	.long	0xfe800064
+DBTR9_A:	.long	0xfe800068
+DBTR10_A:	.long	0xfe80006c
+DBTR11_A:	.long	0xfe800070
+DBTR12_A:	.long	0xfe800074
+DBTR13_A:	.long	0xfe800078
+DBTR14_A:	.long	0xfe80007c
+DBTR15_A:	.long	0xfe800080
+DBTR16_A:	.long	0xfe800084
+DBTR17_A:	.long	0xfe800088
+DBTR18_A:	.long	0xfe80008c
+DBTR19_A:	.long	0xfe800090
+DBRNK0_A:	.long	0xfe800100
+DBPDCNT0_A:	.long	0xfe800200
+DBPDCNT1_A:	.long	0xfe800204
+DBPDCNT2_A:	.long	0xfe800208
+DBPDCNT3_A:	.long	0xfe80020c
+DBPDLCK_A:	.long	0xfe800280
+DBPDRGA_A:	.long	0xfe800290
+DBPDRGD_A:	.long	0xfe8002a0
+DBADJ0_A:	.long	0xfe8000c0
+DBADJ1_A:	.long	0xfe8000c4
+DBADJ2_A:	.long	0xfe8000c8
+DBRFCNF0_A:	.long	0xfe8000e0
+DBRFCNF1_A:	.long	0xfe8000e4
+DBRFCNF2_A:	.long	0xfe8000e8
+DBCALCNF_A:	.long	0xfe8000f4
+DBRFEN_A:	.long	0xfe800014
+DBACEN_A:	.long	0xfe800010
+DBWAIT_A:	.long	0xfe80001c
+
+WAIT_OSC_TIME:	.long	6000
+WAIT_30US:	.long	13333
+
+DBCMD_RSTL_VAL:	.long	0x20000000
+DBCMD_PDEN_VAL:	.long	0x1000d73c
+DBCMD_WAIT_VAL:	.long	0x0000d73c
+DBCMD_RSTH_VAL:	.long	0x2100d73c
+DBCMD_PDXT_VAL:	.long	0x110000c8
+DBCMD_MRS0_VAL:	.long	0x28000930
+DBCMD_MRS1_VAL:	.long	0x29000004
+DBCMD_MRS2_VAL:	.long	0x2a000008
+DBCMD_MRS3_VAL:	.long	0x2b000000
+DBCMD_ZQCL_VAL:	.long	0x03000200
+DBCMD_REF_VAL:	.long	0x0c000000
+DBCMD_SRXT_VAL:	.long	0x19000000
+DBKIND_D:	.long	0x00000007
+DBCONF_D:	.long	0x0f030a01
+DBTR0_D:	.long	0x00000007
+DBTR1_D:	.long	0x00000006
+DBTR2_D:	.long	0x00000000
+DBTR3_D:	.long	0x00000007
+DBTR4_D:	.long	0x00070007
+DBTR5_D:	.long	0x0000001b
+DBTR6_D:	.long	0x00000014
+DBTR7_D:	.long	0x00000005
+DBTR8_D:	.long	0x00000015
+DBTR9_D:	.long	0x00000006
+DBTR10_D:	.long	0x00000008
+DBTR11_D:	.long	0x00000007
+DBTR12_D:	.long	0x0000000e
+DBTR13_D:	.long	0x00000056
+DBTR14_D:	.long	0x00000006
+DBTR15_D:	.long	0x00000004
+DBTR16_D:	.long	0x00150002
+DBTR17_D:	.long	0x000c0017
+DBTR18_D:	.long	0x00000200
+DBTR19_D:	.long	0x00000040
+DBRNK0_D:	.long	0x00000001
+DBPDCNT0_D:	.long	0x00000001
+DBPDCNT1_D:	.long	0x00000001
+DBPDCNT2_D:	.long	0x00000000
+DBPDCNT3_D:	.long	0x00004010
+DBPDLCK_D:	.long	0x0000a55a
+DBPDRGA_D:	.long	0x00000028
+DBPDRGD_D:	.long	0x00017100
+
+DBADJ0_D:	.long	0x00000000
+DBADJ1_D:	.long	0x00000000
+DBADJ2_D:	.long	0x18061806
+DBRFCNF0_D:	.long	0x000001ff
+DBRFCNF1_D:	.long	0x08001000
+DBRFCNF2_D:	.long	0x00000000
+DBCALCNF_D:	.long	0x0000ffff
+DBRFEN_D:	.long	0x00000001
+DBACEN_D:	.long	0x00000001
+
+	.align 2
+exit_ddr:
+#if defined(CONFIG_SH_32BIT)
+	/*------- set PMB -------*/
+	write32	PASCR_A,	PASCR_29BIT_D
+	write32	MMUCR_A,	MMUCR_D
+
+	/*****************************************************************
+	 * ent	virt		phys		v	sz	c	wt
+	 * 0	0xa0000000	0x00000000	1	128M	0	1
+	 * 1	0xa8000000	0x48000000	1	128M	0	1
+	 * 5	0x88000000	0x48000000	1	128M	1	1
+	 */
+	write32	PMB_ADDR_SPIBOOT_A,	PMB_ADDR_SPIBOOT_D
+	write32	PMB_DATA_SPIBOOT_A,	PMB_DATA_SPIBOOT_D
+	write32	PMB_ADDR_DDR_C1_A,	PMB_ADDR_DDR_C1_D
+	write32	PMB_DATA_DDR_C1_A,	PMB_DATA_DDR_C1_D
+	write32	PMB_ADDR_DDR_N1_A,	PMB_ADDR_DDR_N1_D
+	write32	PMB_DATA_DDR_N1_A,	PMB_DATA_DDR_N1_D
+
+	write32	PMB_ADDR_ENTRY2,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY3,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY4,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY6,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY7,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY8,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY9,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY10,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY11,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY12,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY13,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY14,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY15,	PMB_ADDR_NOT_USE_D
+
+	write32	PASCR_A,	PASCR_INIT
+	mov.l	DUMMY_ADDR, r0
+	icbi	@r0
+#endif	/* if defined(CONFIG_SH_32BIT) */
+
+exit_pmb:
+	/* CPU is running on ILRAM? */
+	mov	r14, r0
+	tst	#1, r0
+	bt	1f
+
+	mov.l	_stack_ilram, r15
+	mov.l	_spiboot_main, r0
+100:	bsrf	r0
+	nop
+
+	.align	2
+_spiboot_main:	.long	(spiboot_main - (100b + 4))
+_stack_ilram:	.long	0xe5204000
+
+1:
+	write32	CCR_A,	CCR_D
+
+	rts
+	 nop
+
+	.align 2
+
+#if defined(CONFIG_SH_32BIT)
+/*------- set PMB -------*/
+PMB_ADDR_SPIBOOT_A:	.long	PMB_ADDR_BASE(0)
+PMB_ADDR_DDR_N1_A:	.long	PMB_ADDR_BASE(1)
+PMB_ADDR_DDR_C1_A:	.long	PMB_ADDR_BASE(5)
+PMB_ADDR_ENTRY2:	.long	PMB_ADDR_BASE(2)
+PMB_ADDR_ENTRY3:	.long	PMB_ADDR_BASE(3)
+PMB_ADDR_ENTRY4:	.long	PMB_ADDR_BASE(4)
+PMB_ADDR_ENTRY6:	.long	PMB_ADDR_BASE(6)
+PMB_ADDR_ENTRY7:	.long	PMB_ADDR_BASE(7)
+PMB_ADDR_ENTRY8:	.long	PMB_ADDR_BASE(8)
+PMB_ADDR_ENTRY9:	.long	PMB_ADDR_BASE(9)
+PMB_ADDR_ENTRY10:	.long	PMB_ADDR_BASE(10)
+PMB_ADDR_ENTRY11:	.long	PMB_ADDR_BASE(11)
+PMB_ADDR_ENTRY12:	.long	PMB_ADDR_BASE(12)
+PMB_ADDR_ENTRY13:	.long	PMB_ADDR_BASE(13)
+PMB_ADDR_ENTRY14:	.long	PMB_ADDR_BASE(14)
+PMB_ADDR_ENTRY15:	.long	PMB_ADDR_BASE(15)
+
+PMB_ADDR_SPIBOOT_D:	.long	mk_pmb_addr_val(0xa0)
+PMB_ADDR_DDR_C1_D:	.long	mk_pmb_addr_val(0x88)
+PMB_ADDR_DDR_N1_D:	.long	mk_pmb_addr_val(0xa8)
+PMB_ADDR_NOT_USE_D:	.long	0x00000000
+
+PMB_DATA_SPIBOOT_A:	.long	PMB_DATA_BASE(0)
+PMB_DATA_DDR_N1_A:	.long	PMB_DATA_BASE(1)
+PMB_DATA_DDR_C1_A:	.long	PMB_DATA_BASE(5)
+
+/*						ppn   ub v s1 s0  c  wt */
+PMB_DATA_SPIBOOT_D:	.long	mk_pmb_data_val(0x00, 0, 1, 1, 0, 0, 1)
+PMB_DATA_DDR_C1_D:	.long	mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1)
+PMB_DATA_DDR_N1_D:	.long	mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1)
+
+PASCR_A:		.long	0xff000070
+DUMMY_ADDR:		.long	0xa0000000
+PASCR_29BIT_D:		.long	0x00000000
+PASCR_INIT:		.long	0x80000080
+MMUCR_A:		.long	0xff000010
+MMUCR_D:		.long	0x00000004	/* clear ITLB */
+#endif	/* CONFIG_SH_32BIT */
+
+CCR_A:		.long	CCR
+CCR_D:		.long	CCR_CACHE_INIT