diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 2c4dd7c..fb0cf8c 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -41,6 +41,7 @@
 obj-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o
 obj-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o
 obj-$(CONFIG_MVGBE) += mvgbe.o
+obj-$(CONFIG_MVNETA) += mvneta.o
 obj-$(CONFIG_NATSEMI) += natsemi.o
 obj-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o
 obj-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o
diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c
new file mode 100644
index 0000000..a2a69b4
--- /dev/null
+++ b/drivers/net/mvneta.c
@@ -0,0 +1,1653 @@
+/*
+ * Driver for Marvell NETA network card for Armada XP and Armada 370 SoCs.
+ *
+ * U-Boot version:
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * Based on the Linux version which is:
+ * Copyright (C) 2012 Marvell
+ *
+ * Rami Rosen <rosenr@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <net.h>
+#include <netdev.h>
+#include <config.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <phy.h>
+#include <miiphy.h>
+#include <watchdog.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <linux/compat.h>
+#include <linux/mbus.h>
+
+#if !defined(CONFIG_PHYLIB)
+# error Marvell mvneta requires PHYLIB
+#endif
+
+/* Some linux -> U-Boot compatibility stuff */
+#define netdev_err(dev, fmt, args...)		\
+	printf(fmt, ##args)
+#define netdev_warn(dev, fmt, args...)		\
+	printf(fmt, ##args)
+#define netdev_info(dev, fmt, args...)		\
+	printf(fmt, ##args)
+
+#define CONFIG_NR_CPUS		1
+#define BIT(nr)			(1UL << (nr))
+#define ETH_HLEN		14	/* Total octets in header */
+
+/* 2(HW hdr) 14(MAC hdr) 4(CRC) 32(extra for cache prefetch) */
+#define WRAP			(2 + ETH_HLEN + 4 + 32)
+#define MTU			1500
+#define RX_BUFFER_SIZE		(ALIGN(MTU + WRAP, ARCH_DMA_MINALIGN))
+
+#define MVNETA_SMI_TIMEOUT			10000
+
+/* Registers */
+#define MVNETA_RXQ_CONFIG_REG(q)                (0x1400 + ((q) << 2))
+#define	     MVNETA_RXQ_HW_BUF_ALLOC            BIT(1)
+#define      MVNETA_RXQ_PKT_OFFSET_ALL_MASK     (0xf    << 8)
+#define      MVNETA_RXQ_PKT_OFFSET_MASK(offs)   ((offs) << 8)
+#define MVNETA_RXQ_THRESHOLD_REG(q)             (0x14c0 + ((q) << 2))
+#define      MVNETA_RXQ_NON_OCCUPIED(v)         ((v) << 16)
+#define MVNETA_RXQ_BASE_ADDR_REG(q)             (0x1480 + ((q) << 2))
+#define MVNETA_RXQ_SIZE_REG(q)                  (0x14a0 + ((q) << 2))
+#define      MVNETA_RXQ_BUF_SIZE_SHIFT          19
+#define      MVNETA_RXQ_BUF_SIZE_MASK           (0x1fff << 19)
+#define MVNETA_RXQ_STATUS_REG(q)                (0x14e0 + ((q) << 2))
+#define      MVNETA_RXQ_OCCUPIED_ALL_MASK       0x3fff
+#define MVNETA_RXQ_STATUS_UPDATE_REG(q)         (0x1500 + ((q) << 2))
+#define      MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT  16
+#define      MVNETA_RXQ_ADD_NON_OCCUPIED_MAX    255
+#define MVNETA_PORT_RX_RESET                    0x1cc0
+#define      MVNETA_PORT_RX_DMA_RESET           BIT(0)
+#define MVNETA_PHY_ADDR                         0x2000
+#define      MVNETA_PHY_ADDR_MASK               0x1f
+#define MVNETA_SMI                              0x2004
+#define      MVNETA_PHY_REG_MASK                0x1f
+/* SMI register fields */
+#define     MVNETA_SMI_DATA_OFFS		0	/* Data */
+#define     MVNETA_SMI_DATA_MASK		(0xffff << MVNETA_SMI_DATA_OFFS)
+#define     MVNETA_SMI_DEV_ADDR_OFFS		16	/* PHY device address */
+#define     MVNETA_SMI_REG_ADDR_OFFS		21	/* PHY device reg addr*/
+#define     MVNETA_SMI_OPCODE_OFFS		26	/* Write/Read opcode */
+#define     MVNETA_SMI_OPCODE_READ		(1 << MVNETA_SMI_OPCODE_OFFS)
+#define     MVNETA_SMI_READ_VALID		(1 << 27)	/* Read Valid */
+#define     MVNETA_SMI_BUSY			(1 << 28)	/* Busy */
+#define MVNETA_MBUS_RETRY                       0x2010
+#define MVNETA_UNIT_INTR_CAUSE                  0x2080
+#define MVNETA_UNIT_CONTROL                     0x20B0
+#define      MVNETA_PHY_POLLING_ENABLE          BIT(1)
+#define MVNETA_WIN_BASE(w)                      (0x2200 + ((w) << 3))
+#define MVNETA_WIN_SIZE(w)                      (0x2204 + ((w) << 3))
+#define MVNETA_WIN_REMAP(w)                     (0x2280 + ((w) << 2))
+#define MVNETA_BASE_ADDR_ENABLE                 0x2290
+#define MVNETA_PORT_CONFIG                      0x2400
+#define      MVNETA_UNI_PROMISC_MODE            BIT(0)
+#define      MVNETA_DEF_RXQ(q)                  ((q) << 1)
+#define      MVNETA_DEF_RXQ_ARP(q)              ((q) << 4)
+#define      MVNETA_TX_UNSET_ERR_SUM            BIT(12)
+#define      MVNETA_DEF_RXQ_TCP(q)              ((q) << 16)
+#define      MVNETA_DEF_RXQ_UDP(q)              ((q) << 19)
+#define      MVNETA_DEF_RXQ_BPDU(q)             ((q) << 22)
+#define      MVNETA_RX_CSUM_WITH_PSEUDO_HDR     BIT(25)
+#define      MVNETA_PORT_CONFIG_DEFL_VALUE(q)   (MVNETA_DEF_RXQ(q)       | \
+						 MVNETA_DEF_RXQ_ARP(q)	 | \
+						 MVNETA_DEF_RXQ_TCP(q)	 | \
+						 MVNETA_DEF_RXQ_UDP(q)	 | \
+						 MVNETA_DEF_RXQ_BPDU(q)	 | \
+						 MVNETA_TX_UNSET_ERR_SUM | \
+						 MVNETA_RX_CSUM_WITH_PSEUDO_HDR)
+#define MVNETA_PORT_CONFIG_EXTEND                0x2404
+#define MVNETA_MAC_ADDR_LOW                      0x2414
+#define MVNETA_MAC_ADDR_HIGH                     0x2418
+#define MVNETA_SDMA_CONFIG                       0x241c
+#define      MVNETA_SDMA_BRST_SIZE_16            4
+#define      MVNETA_RX_BRST_SZ_MASK(burst)       ((burst) << 1)
+#define      MVNETA_RX_NO_DATA_SWAP              BIT(4)
+#define      MVNETA_TX_NO_DATA_SWAP              BIT(5)
+#define      MVNETA_DESC_SWAP                    BIT(6)
+#define      MVNETA_TX_BRST_SZ_MASK(burst)       ((burst) << 22)
+#define MVNETA_PORT_STATUS                       0x2444
+#define      MVNETA_TX_IN_PRGRS                  BIT(1)
+#define      MVNETA_TX_FIFO_EMPTY                BIT(8)
+#define MVNETA_RX_MIN_FRAME_SIZE                 0x247c
+#define MVNETA_SERDES_CFG			 0x24A0
+#define      MVNETA_SGMII_SERDES_PROTO		 0x0cc7
+#define      MVNETA_QSGMII_SERDES_PROTO		 0x0667
+#define MVNETA_TYPE_PRIO                         0x24bc
+#define      MVNETA_FORCE_UNI                    BIT(21)
+#define MVNETA_TXQ_CMD_1                         0x24e4
+#define MVNETA_TXQ_CMD                           0x2448
+#define      MVNETA_TXQ_DISABLE_SHIFT            8
+#define      MVNETA_TXQ_ENABLE_MASK              0x000000ff
+#define MVNETA_ACC_MODE                          0x2500
+#define MVNETA_CPU_MAP(cpu)                      (0x2540 + ((cpu) << 2))
+#define      MVNETA_CPU_RXQ_ACCESS_ALL_MASK      0x000000ff
+#define      MVNETA_CPU_TXQ_ACCESS_ALL_MASK      0x0000ff00
+#define MVNETA_RXQ_TIME_COAL_REG(q)              (0x2580 + ((q) << 2))
+
+/* Exception Interrupt Port/Queue Cause register */
+
+#define MVNETA_INTR_NEW_CAUSE                    0x25a0
+#define MVNETA_INTR_NEW_MASK                     0x25a4
+
+/* bits  0..7  = TXQ SENT, one bit per queue.
+ * bits  8..15 = RXQ OCCUP, one bit per queue.
+ * bits 16..23 = RXQ FREE, one bit per queue.
+ * bit  29 = OLD_REG_SUM, see old reg ?
+ * bit  30 = TX_ERR_SUM, one bit for 4 ports
+ * bit  31 = MISC_SUM,   one bit for 4 ports
+ */
+#define      MVNETA_TX_INTR_MASK(nr_txqs)        (((1 << nr_txqs) - 1) << 0)
+#define      MVNETA_TX_INTR_MASK_ALL             (0xff << 0)
+#define      MVNETA_RX_INTR_MASK(nr_rxqs)        (((1 << nr_rxqs) - 1) << 8)
+#define      MVNETA_RX_INTR_MASK_ALL             (0xff << 8)
+
+#define MVNETA_INTR_OLD_CAUSE                    0x25a8
+#define MVNETA_INTR_OLD_MASK                     0x25ac
+
+/* Data Path Port/Queue Cause Register */
+#define MVNETA_INTR_MISC_CAUSE                   0x25b0
+#define MVNETA_INTR_MISC_MASK                    0x25b4
+#define MVNETA_INTR_ENABLE                       0x25b8
+
+#define MVNETA_RXQ_CMD                           0x2680
+#define      MVNETA_RXQ_DISABLE_SHIFT            8
+#define      MVNETA_RXQ_ENABLE_MASK              0x000000ff
+#define MVETH_TXQ_TOKEN_COUNT_REG(q)             (0x2700 + ((q) << 4))
+#define MVETH_TXQ_TOKEN_CFG_REG(q)               (0x2704 + ((q) << 4))
+#define MVNETA_GMAC_CTRL_0                       0x2c00
+#define      MVNETA_GMAC_MAX_RX_SIZE_SHIFT       2
+#define      MVNETA_GMAC_MAX_RX_SIZE_MASK        0x7ffc
+#define      MVNETA_GMAC0_PORT_ENABLE            BIT(0)
+#define MVNETA_GMAC_CTRL_2                       0x2c08
+#define      MVNETA_GMAC2_PCS_ENABLE             BIT(3)
+#define      MVNETA_GMAC2_PORT_RGMII             BIT(4)
+#define      MVNETA_GMAC2_PORT_RESET             BIT(6)
+#define MVNETA_GMAC_STATUS                       0x2c10
+#define      MVNETA_GMAC_LINK_UP                 BIT(0)
+#define      MVNETA_GMAC_SPEED_1000              BIT(1)
+#define      MVNETA_GMAC_SPEED_100               BIT(2)
+#define      MVNETA_GMAC_FULL_DUPLEX             BIT(3)
+#define      MVNETA_GMAC_RX_FLOW_CTRL_ENABLE     BIT(4)
+#define      MVNETA_GMAC_TX_FLOW_CTRL_ENABLE     BIT(5)
+#define      MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE     BIT(6)
+#define      MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE     BIT(7)
+#define MVNETA_GMAC_AUTONEG_CONFIG               0x2c0c
+#define      MVNETA_GMAC_FORCE_LINK_DOWN         BIT(0)
+#define      MVNETA_GMAC_FORCE_LINK_PASS         BIT(1)
+#define      MVNETA_GMAC_CONFIG_MII_SPEED        BIT(5)
+#define      MVNETA_GMAC_CONFIG_GMII_SPEED       BIT(6)
+#define      MVNETA_GMAC_AN_SPEED_EN             BIT(7)
+#define      MVNETA_GMAC_CONFIG_FULL_DUPLEX      BIT(12)
+#define      MVNETA_GMAC_AN_DUPLEX_EN            BIT(13)
+#define MVNETA_MIB_COUNTERS_BASE                 0x3080
+#define      MVNETA_MIB_LATE_COLLISION           0x7c
+#define MVNETA_DA_FILT_SPEC_MCAST                0x3400
+#define MVNETA_DA_FILT_OTH_MCAST                 0x3500
+#define MVNETA_DA_FILT_UCAST_BASE                0x3600
+#define MVNETA_TXQ_BASE_ADDR_REG(q)              (0x3c00 + ((q) << 2))
+#define MVNETA_TXQ_SIZE_REG(q)                   (0x3c20 + ((q) << 2))
+#define      MVNETA_TXQ_SENT_THRESH_ALL_MASK     0x3fff0000
+#define      MVNETA_TXQ_SENT_THRESH_MASK(coal)   ((coal) << 16)
+#define MVNETA_TXQ_UPDATE_REG(q)                 (0x3c60 + ((q) << 2))
+#define      MVNETA_TXQ_DEC_SENT_SHIFT           16
+#define MVNETA_TXQ_STATUS_REG(q)                 (0x3c40 + ((q) << 2))
+#define      MVNETA_TXQ_SENT_DESC_SHIFT          16
+#define      MVNETA_TXQ_SENT_DESC_MASK           0x3fff0000
+#define MVNETA_PORT_TX_RESET                     0x3cf0
+#define      MVNETA_PORT_TX_DMA_RESET            BIT(0)
+#define MVNETA_TX_MTU                            0x3e0c
+#define MVNETA_TX_TOKEN_SIZE                     0x3e14
+#define      MVNETA_TX_TOKEN_SIZE_MAX            0xffffffff
+#define MVNETA_TXQ_TOKEN_SIZE_REG(q)             (0x3e40 + ((q) << 2))
+#define      MVNETA_TXQ_TOKEN_SIZE_MAX           0x7fffffff
+
+/* Descriptor ring Macros */
+#define MVNETA_QUEUE_NEXT_DESC(q, index)	\
+	(((index) < (q)->last_desc) ? ((index) + 1) : 0)
+
+/* Various constants */
+
+/* Coalescing */
+#define MVNETA_TXDONE_COAL_PKTS		16
+#define MVNETA_RX_COAL_PKTS		32
+#define MVNETA_RX_COAL_USEC		100
+
+/* The two bytes Marvell header. Either contains a special value used
+ * by Marvell switches when a specific hardware mode is enabled (not
+ * supported by this driver) or is filled automatically by zeroes on
+ * the RX side. Those two bytes being at the front of the Ethernet
+ * header, they allow to have the IP header aligned on a 4 bytes
+ * boundary automatically: the hardware skips those two bytes on its
+ * own.
+ */
+#define MVNETA_MH_SIZE			2
+
+#define MVNETA_VLAN_TAG_LEN             4
+
+#define MVNETA_CPU_D_CACHE_LINE_SIZE    32
+#define MVNETA_TX_CSUM_MAX_SIZE		9800
+#define MVNETA_ACC_MODE_EXT		1
+
+/* Timeout constants */
+#define MVNETA_TX_DISABLE_TIMEOUT_MSEC	1000
+#define MVNETA_RX_DISABLE_TIMEOUT_MSEC	1000
+#define MVNETA_TX_FIFO_EMPTY_TIMEOUT	10000
+
+#define MVNETA_TX_MTU_MAX		0x3ffff
+
+/* Max number of Rx descriptors */
+#define MVNETA_MAX_RXD 16
+
+/* Max number of Tx descriptors */
+#define MVNETA_MAX_TXD 16
+
+/* descriptor aligned size */
+#define MVNETA_DESC_ALIGNED_SIZE	32
+
+struct mvneta_port {
+	void __iomem *base;
+	struct mvneta_rx_queue *rxqs;
+	struct mvneta_tx_queue *txqs;
+
+	u8 mcast_count[256];
+	u16 tx_ring_size;
+	u16 rx_ring_size;
+
+	phy_interface_t phy_interface;
+	unsigned int link;
+	unsigned int duplex;
+	unsigned int speed;
+
+	int init;
+	int phyaddr;
+	struct phy_device *phydev;
+	struct mii_dev *bus;
+};
+
+/* The mvneta_tx_desc and mvneta_rx_desc structures describe the
+ * layout of the transmit and reception DMA descriptors, and their
+ * layout is therefore defined by the hardware design
+ */
+
+#define MVNETA_TX_L3_OFF_SHIFT	0
+#define MVNETA_TX_IP_HLEN_SHIFT	8
+#define MVNETA_TX_L4_UDP	BIT(16)
+#define MVNETA_TX_L3_IP6	BIT(17)
+#define MVNETA_TXD_IP_CSUM	BIT(18)
+#define MVNETA_TXD_Z_PAD	BIT(19)
+#define MVNETA_TXD_L_DESC	BIT(20)
+#define MVNETA_TXD_F_DESC	BIT(21)
+#define MVNETA_TXD_FLZ_DESC	(MVNETA_TXD_Z_PAD  | \
+				 MVNETA_TXD_L_DESC | \
+				 MVNETA_TXD_F_DESC)
+#define MVNETA_TX_L4_CSUM_FULL	BIT(30)
+#define MVNETA_TX_L4_CSUM_NOT	BIT(31)
+
+#define MVNETA_RXD_ERR_CRC		0x0
+#define MVNETA_RXD_ERR_SUMMARY		BIT(16)
+#define MVNETA_RXD_ERR_OVERRUN		BIT(17)
+#define MVNETA_RXD_ERR_LEN		BIT(18)
+#define MVNETA_RXD_ERR_RESOURCE		(BIT(17) | BIT(18))
+#define MVNETA_RXD_ERR_CODE_MASK	(BIT(17) | BIT(18))
+#define MVNETA_RXD_L3_IP4		BIT(25)
+#define MVNETA_RXD_FIRST_LAST_DESC	(BIT(26) | BIT(27))
+#define MVNETA_RXD_L4_CSUM_OK		BIT(30)
+
+struct mvneta_tx_desc {
+	u32  command;		/* Options used by HW for packet transmitting.*/
+	u16  reserverd1;	/* csum_l4 (for future use)		*/
+	u16  data_size;		/* Data size of transmitted packet in bytes */
+	u32  buf_phys_addr;	/* Physical addr of transmitted buffer	*/
+	u32  reserved2;		/* hw_cmd - (for future use, PMT)	*/
+	u32  reserved3[4];	/* Reserved - (for future use)		*/
+};
+
+struct mvneta_rx_desc {
+	u32  status;		/* Info about received packet		*/
+	u16  reserved1;		/* pnc_info - (for future use, PnC)	*/
+	u16  data_size;		/* Size of received packet in bytes	*/
+
+	u32  buf_phys_addr;	/* Physical address of the buffer	*/
+	u32  reserved2;		/* pnc_flow_id  (for future use, PnC)	*/
+
+	u32  buf_cookie;	/* cookie for access to RX buffer in rx path */
+	u16  reserved3;		/* prefetch_cmd, for future use		*/
+	u16  reserved4;		/* csum_l4 - (for future use, PnC)	*/
+
+	u32  reserved5;		/* pnc_extra PnC (for future use, PnC)	*/
+	u32  reserved6;		/* hw_cmd (for future use, PnC and HWF)	*/
+};
+
+struct mvneta_tx_queue {
+	/* Number of this TX queue, in the range 0-7 */
+	u8 id;
+
+	/* Number of TX DMA descriptors in the descriptor ring */
+	int size;
+
+	/* Index of last TX DMA descriptor that was inserted */
+	int txq_put_index;
+
+	/* Index of the TX DMA descriptor to be cleaned up */
+	int txq_get_index;
+
+	/* Virtual address of the TX DMA descriptors array */
+	struct mvneta_tx_desc *descs;
+
+	/* DMA address of the TX DMA descriptors array */
+	dma_addr_t descs_phys;
+
+	/* Index of the last TX DMA descriptor */
+	int last_desc;
+
+	/* Index of the next TX DMA descriptor to process */
+	int next_desc_to_proc;
+};
+
+struct mvneta_rx_queue {
+	/* rx queue number, in the range 0-7 */
+	u8 id;
+
+	/* num of rx descriptors in the rx descriptor ring */
+	int size;
+
+	/* Virtual address of the RX DMA descriptors array */
+	struct mvneta_rx_desc *descs;
+
+	/* DMA address of the RX DMA descriptors array */
+	dma_addr_t descs_phys;
+
+	/* Index of the last RX DMA descriptor */
+	int last_desc;
+
+	/* Index of the next RX DMA descriptor to process */
+	int next_desc_to_proc;
+};
+
+/* U-Boot doesn't use the queues, so set the number to 1 */
+static int rxq_number = 1;
+static int txq_number = 1;
+static int rxq_def;
+
+struct buffer_location {
+	struct mvneta_tx_desc *tx_descs;
+	struct mvneta_rx_desc *rx_descs;
+	u32 rx_buffers;
+};
+
+/*
+ * All 4 interfaces use the same global buffer, since only one interface
+ * can be enabled at once
+ */
+static struct buffer_location buffer_loc;
+
+/*
+ * Page table entries are set to 1MB, or multiples of 1MB
+ * (not < 1MB). driver uses less bd's so use 1MB bdspace.
+ */
+#define BD_SPACE	(1 << 20)
+
+/* Utility/helper methods */
+
+/* Write helper method */
+static void mvreg_write(struct mvneta_port *pp, u32 offset, u32 data)
+{
+	writel(data, pp->base + offset);
+}
+
+/* Read helper method */
+static u32 mvreg_read(struct mvneta_port *pp, u32 offset)
+{
+	return readl(pp->base + offset);
+}
+
+/* Clear all MIB counters */
+static void mvneta_mib_counters_clear(struct mvneta_port *pp)
+{
+	int i;
+
+	/* Perform dummy reads from MIB counters */
+	for (i = 0; i < MVNETA_MIB_LATE_COLLISION; i += 4)
+		mvreg_read(pp, (MVNETA_MIB_COUNTERS_BASE + i));
+}
+
+/* Rx descriptors helper methods */
+
+/* Checks whether the RX descriptor having this status is both the first
+ * and the last descriptor for the RX packet. Each RX packet is currently
+ * received through a single RX descriptor, so not having each RX
+ * descriptor with its first and last bits set is an error
+ */
+static int mvneta_rxq_desc_is_first_last(u32 status)
+{
+	return (status & MVNETA_RXD_FIRST_LAST_DESC) ==
+		MVNETA_RXD_FIRST_LAST_DESC;
+}
+
+/* Add number of descriptors ready to receive new packets */
+static void mvneta_rxq_non_occup_desc_add(struct mvneta_port *pp,
+					  struct mvneta_rx_queue *rxq,
+					  int ndescs)
+{
+	/* Only MVNETA_RXQ_ADD_NON_OCCUPIED_MAX (255) descriptors can
+	 * be added at once
+	 */
+	while (ndescs > MVNETA_RXQ_ADD_NON_OCCUPIED_MAX) {
+		mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id),
+			    (MVNETA_RXQ_ADD_NON_OCCUPIED_MAX <<
+			     MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT));
+		ndescs -= MVNETA_RXQ_ADD_NON_OCCUPIED_MAX;
+	}
+
+	mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id),
+		    (ndescs << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT));
+}
+
+/* Get number of RX descriptors occupied by received packets */
+static int mvneta_rxq_busy_desc_num_get(struct mvneta_port *pp,
+					struct mvneta_rx_queue *rxq)
+{
+	u32 val;
+
+	val = mvreg_read(pp, MVNETA_RXQ_STATUS_REG(rxq->id));
+	return val & MVNETA_RXQ_OCCUPIED_ALL_MASK;
+}
+
+/* Update num of rx desc called upon return from rx path or
+ * from mvneta_rxq_drop_pkts().
+ */
+static void mvneta_rxq_desc_num_update(struct mvneta_port *pp,
+				       struct mvneta_rx_queue *rxq,
+				       int rx_done, int rx_filled)
+{
+	u32 val;
+
+	if ((rx_done <= 0xff) && (rx_filled <= 0xff)) {
+		val = rx_done |
+		  (rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT);
+		mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val);
+		return;
+	}
+
+	/* Only 255 descriptors can be added at once */
+	while ((rx_done > 0) || (rx_filled > 0)) {
+		if (rx_done <= 0xff) {
+			val = rx_done;
+			rx_done = 0;
+		} else {
+			val = 0xff;
+			rx_done -= 0xff;
+		}
+		if (rx_filled <= 0xff) {
+			val |= rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT;
+			rx_filled = 0;
+		} else {
+			val |= 0xff << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT;
+			rx_filled -= 0xff;
+		}
+		mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val);
+	}
+}
+
+/* Get pointer to next RX descriptor to be processed by SW */
+static struct mvneta_rx_desc *
+mvneta_rxq_next_desc_get(struct mvneta_rx_queue *rxq)
+{
+	int rx_desc = rxq->next_desc_to_proc;
+
+	rxq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(rxq, rx_desc);
+	return rxq->descs + rx_desc;
+}
+
+/* Tx descriptors helper methods */
+
+/* Update HW with number of TX descriptors to be sent */
+static void mvneta_txq_pend_desc_add(struct mvneta_port *pp,
+				     struct mvneta_tx_queue *txq,
+				     int pend_desc)
+{
+	u32 val;
+
+	/* Only 255 descriptors can be added at once ; Assume caller
+	 * process TX desriptors in quanta less than 256
+	 */
+	val = pend_desc;
+	mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
+}
+
+/* Get pointer to next TX descriptor to be processed (send) by HW */
+static struct mvneta_tx_desc *
+mvneta_txq_next_desc_get(struct mvneta_tx_queue *txq)
+{
+	int tx_desc = txq->next_desc_to_proc;
+
+	txq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(txq, tx_desc);
+	return txq->descs + tx_desc;
+}
+
+/* Set rxq buf size */
+static void mvneta_rxq_buf_size_set(struct mvneta_port *pp,
+				    struct mvneta_rx_queue *rxq,
+				    int buf_size)
+{
+	u32 val;
+
+	val = mvreg_read(pp, MVNETA_RXQ_SIZE_REG(rxq->id));
+
+	val &= ~MVNETA_RXQ_BUF_SIZE_MASK;
+	val |= ((buf_size >> 3) << MVNETA_RXQ_BUF_SIZE_SHIFT);
+
+	mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), val);
+}
+
+/* Start the Ethernet port RX and TX activity */
+static void mvneta_port_up(struct mvneta_port *pp)
+{
+	int queue;
+	u32 q_map;
+
+	/* Enable all initialized TXs. */
+	mvneta_mib_counters_clear(pp);
+	q_map = 0;
+	for (queue = 0; queue < txq_number; queue++) {
+		struct mvneta_tx_queue *txq = &pp->txqs[queue];
+		if (txq->descs != NULL)
+			q_map |= (1 << queue);
+	}
+	mvreg_write(pp, MVNETA_TXQ_CMD, q_map);
+
+	/* Enable all initialized RXQs. */
+	q_map = 0;
+	for (queue = 0; queue < rxq_number; queue++) {
+		struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
+		if (rxq->descs != NULL)
+			q_map |= (1 << queue);
+	}
+	mvreg_write(pp, MVNETA_RXQ_CMD, q_map);
+}
+
+/* Stop the Ethernet port activity */
+static void mvneta_port_down(struct mvneta_port *pp)
+{
+	u32 val;
+	int count;
+
+	/* Stop Rx port activity. Check port Rx activity. */
+	val = mvreg_read(pp, MVNETA_RXQ_CMD) & MVNETA_RXQ_ENABLE_MASK;
+
+	/* Issue stop command for active channels only */
+	if (val != 0)
+		mvreg_write(pp, MVNETA_RXQ_CMD,
+			    val << MVNETA_RXQ_DISABLE_SHIFT);
+
+	/* Wait for all Rx activity to terminate. */
+	count = 0;
+	do {
+		if (count++ >= MVNETA_RX_DISABLE_TIMEOUT_MSEC) {
+			netdev_warn(pp->dev,
+				    "TIMEOUT for RX stopped ! rx_queue_cmd: 0x08%x\n",
+				    val);
+			break;
+		}
+		mdelay(1);
+
+		val = mvreg_read(pp, MVNETA_RXQ_CMD);
+	} while (val & 0xff);
+
+	/* Stop Tx port activity. Check port Tx activity. Issue stop
+	 * command for active channels only
+	 */
+	val = (mvreg_read(pp, MVNETA_TXQ_CMD)) & MVNETA_TXQ_ENABLE_MASK;
+
+	if (val != 0)
+		mvreg_write(pp, MVNETA_TXQ_CMD,
+			    (val << MVNETA_TXQ_DISABLE_SHIFT));
+
+	/* Wait for all Tx activity to terminate. */
+	count = 0;
+	do {
+		if (count++ >= MVNETA_TX_DISABLE_TIMEOUT_MSEC) {
+			netdev_warn(pp->dev,
+				    "TIMEOUT for TX stopped status=0x%08x\n",
+				    val);
+			break;
+		}
+		mdelay(1);
+
+		/* Check TX Command reg that all Txqs are stopped */
+		val = mvreg_read(pp, MVNETA_TXQ_CMD);
+
+	} while (val & 0xff);
+
+	/* Double check to verify that TX FIFO is empty */
+	count = 0;
+	do {
+		if (count++ >= MVNETA_TX_FIFO_EMPTY_TIMEOUT) {
+			netdev_warn(pp->dev,
+				    "TX FIFO empty timeout status=0x08%x\n",
+				    val);
+			break;
+		}
+		mdelay(1);
+
+		val = mvreg_read(pp, MVNETA_PORT_STATUS);
+	} while (!(val & MVNETA_TX_FIFO_EMPTY) &&
+		 (val & MVNETA_TX_IN_PRGRS));
+
+	udelay(200);
+}
+
+/* Enable the port by setting the port enable bit of the MAC control register */
+static void mvneta_port_enable(struct mvneta_port *pp)
+{
+	u32 val;
+
+	/* Enable port */
+	val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
+	val |= MVNETA_GMAC0_PORT_ENABLE;
+	mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
+}
+
+/* Disable the port and wait for about 200 usec before retuning */
+static void mvneta_port_disable(struct mvneta_port *pp)
+{
+	u32 val;
+
+	/* Reset the Enable bit in the Serial Control Register */
+	val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
+	val &= ~MVNETA_GMAC0_PORT_ENABLE;
+	mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
+
+	udelay(200);
+}
+
+/* Multicast tables methods */
+
+/* Set all entries in Unicast MAC Table; queue==-1 means reject all */
+static void mvneta_set_ucast_table(struct mvneta_port *pp, int queue)
+{
+	int offset;
+	u32 val;
+
+	if (queue == -1) {
+		val = 0;
+	} else {
+		val = 0x1 | (queue << 1);
+		val |= (val << 24) | (val << 16) | (val << 8);
+	}
+
+	for (offset = 0; offset <= 0xc; offset += 4)
+		mvreg_write(pp, MVNETA_DA_FILT_UCAST_BASE + offset, val);
+}
+
+/* Set all entries in Special Multicast MAC Table; queue==-1 means reject all */
+static void mvneta_set_special_mcast_table(struct mvneta_port *pp, int queue)
+{
+	int offset;
+	u32 val;
+
+	if (queue == -1) {
+		val = 0;
+	} else {
+		val = 0x1 | (queue << 1);
+		val |= (val << 24) | (val << 16) | (val << 8);
+	}
+
+	for (offset = 0; offset <= 0xfc; offset += 4)
+		mvreg_write(pp, MVNETA_DA_FILT_SPEC_MCAST + offset, val);
+}
+
+/* Set all entries in Other Multicast MAC Table. queue==-1 means reject all */
+static void mvneta_set_other_mcast_table(struct mvneta_port *pp, int queue)
+{
+	int offset;
+	u32 val;
+
+	if (queue == -1) {
+		memset(pp->mcast_count, 0, sizeof(pp->mcast_count));
+		val = 0;
+	} else {
+		memset(pp->mcast_count, 1, sizeof(pp->mcast_count));
+		val = 0x1 | (queue << 1);
+		val |= (val << 24) | (val << 16) | (val << 8);
+	}
+
+	for (offset = 0; offset <= 0xfc; offset += 4)
+		mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
+}
+
+/* This method sets defaults to the NETA port:
+ *	Clears interrupt Cause and Mask registers.
+ *	Clears all MAC tables.
+ *	Sets defaults to all registers.
+ *	Resets RX and TX descriptor rings.
+ *	Resets PHY.
+ * This method can be called after mvneta_port_down() to return the port
+ *	settings to defaults.
+ */
+static void mvneta_defaults_set(struct mvneta_port *pp)
+{
+	int cpu;
+	int queue;
+	u32 val;
+
+	/* Clear all Cause registers */
+	mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0);
+	mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
+	mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
+
+	/* Mask all interrupts */
+	mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
+	mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
+	mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+	mvreg_write(pp, MVNETA_INTR_ENABLE, 0);
+
+	/* Enable MBUS Retry bit16 */
+	mvreg_write(pp, MVNETA_MBUS_RETRY, 0x20);
+
+	/* Set CPU queue access map - all CPUs have access to all RX
+	 * queues and to all TX queues
+	 */
+	for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++)
+		mvreg_write(pp, MVNETA_CPU_MAP(cpu),
+			    (MVNETA_CPU_RXQ_ACCESS_ALL_MASK |
+			     MVNETA_CPU_TXQ_ACCESS_ALL_MASK));
+
+	/* Reset RX and TX DMAs */
+	mvreg_write(pp, MVNETA_PORT_RX_RESET, MVNETA_PORT_RX_DMA_RESET);
+	mvreg_write(pp, MVNETA_PORT_TX_RESET, MVNETA_PORT_TX_DMA_RESET);
+
+	/* Disable Legacy WRR, Disable EJP, Release from reset */
+	mvreg_write(pp, MVNETA_TXQ_CMD_1, 0);
+	for (queue = 0; queue < txq_number; queue++) {
+		mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(queue), 0);
+		mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(queue), 0);
+	}
+
+	mvreg_write(pp, MVNETA_PORT_TX_RESET, 0);
+	mvreg_write(pp, MVNETA_PORT_RX_RESET, 0);
+
+	/* Set Port Acceleration Mode */
+	val = MVNETA_ACC_MODE_EXT;
+	mvreg_write(pp, MVNETA_ACC_MODE, val);
+
+	/* Update val of portCfg register accordingly with all RxQueue types */
+	val = MVNETA_PORT_CONFIG_DEFL_VALUE(rxq_def);
+	mvreg_write(pp, MVNETA_PORT_CONFIG, val);
+
+	val = 0;
+	mvreg_write(pp, MVNETA_PORT_CONFIG_EXTEND, val);
+	mvreg_write(pp, MVNETA_RX_MIN_FRAME_SIZE, 64);
+
+	/* Build PORT_SDMA_CONFIG_REG */
+	val = 0;
+
+	/* Default burst size */
+	val |= MVNETA_TX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16);
+	val |= MVNETA_RX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16);
+	val |= MVNETA_RX_NO_DATA_SWAP | MVNETA_TX_NO_DATA_SWAP;
+
+	/* Assign port SDMA configuration */
+	mvreg_write(pp, MVNETA_SDMA_CONFIG, val);
+
+	/* Enable PHY polling in hardware for U-Boot */
+	val = mvreg_read(pp, MVNETA_UNIT_CONTROL);
+	val |= MVNETA_PHY_POLLING_ENABLE;
+	mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
+
+	mvneta_set_ucast_table(pp, -1);
+	mvneta_set_special_mcast_table(pp, -1);
+	mvneta_set_other_mcast_table(pp, -1);
+}
+
+/* Set unicast address */
+static void mvneta_set_ucast_addr(struct mvneta_port *pp, u8 last_nibble,
+				  int queue)
+{
+	unsigned int unicast_reg;
+	unsigned int tbl_offset;
+	unsigned int reg_offset;
+
+	/* Locate the Unicast table entry */
+	last_nibble = (0xf & last_nibble);
+
+	/* offset from unicast tbl base */
+	tbl_offset = (last_nibble / 4) * 4;
+
+	/* offset within the above reg  */
+	reg_offset = last_nibble % 4;
+
+	unicast_reg = mvreg_read(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset));
+
+	if (queue == -1) {
+		/* Clear accepts frame bit at specified unicast DA tbl entry */
+		unicast_reg &= ~(0xff << (8 * reg_offset));
+	} else {
+		unicast_reg &= ~(0xff << (8 * reg_offset));
+		unicast_reg |= ((0x01 | (queue << 1)) << (8 * reg_offset));
+	}
+
+	mvreg_write(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset), unicast_reg);
+}
+
+/* Set mac address */
+static void mvneta_mac_addr_set(struct mvneta_port *pp, unsigned char *addr,
+				int queue)
+{
+	unsigned int mac_h;
+	unsigned int mac_l;
+
+	if (queue != -1) {
+		mac_l = (addr[4] << 8) | (addr[5]);
+		mac_h = (addr[0] << 24) | (addr[1] << 16) |
+			(addr[2] << 8) | (addr[3] << 0);
+
+		mvreg_write(pp, MVNETA_MAC_ADDR_LOW, mac_l);
+		mvreg_write(pp, MVNETA_MAC_ADDR_HIGH, mac_h);
+	}
+
+	/* Accept frames of this address */
+	mvneta_set_ucast_addr(pp, addr[5], queue);
+}
+
+/* Handle rx descriptor fill by setting buf_cookie and buf_phys_addr */
+static void mvneta_rx_desc_fill(struct mvneta_rx_desc *rx_desc,
+				u32 phys_addr, u32 cookie)
+{
+	rx_desc->buf_cookie = cookie;
+	rx_desc->buf_phys_addr = phys_addr;
+}
+
+/* Decrement sent descriptors counter */
+static void mvneta_txq_sent_desc_dec(struct mvneta_port *pp,
+				     struct mvneta_tx_queue *txq,
+				     int sent_desc)
+{
+	u32 val;
+
+	/* Only 255 TX descriptors can be updated at once */
+	while (sent_desc > 0xff) {
+		val = 0xff << MVNETA_TXQ_DEC_SENT_SHIFT;
+		mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
+		sent_desc = sent_desc - 0xff;
+	}
+
+	val = sent_desc << MVNETA_TXQ_DEC_SENT_SHIFT;
+	mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
+}
+
+/* Get number of TX descriptors already sent by HW */
+static int mvneta_txq_sent_desc_num_get(struct mvneta_port *pp,
+					struct mvneta_tx_queue *txq)
+{
+	u32 val;
+	int sent_desc;
+
+	val = mvreg_read(pp, MVNETA_TXQ_STATUS_REG(txq->id));
+	sent_desc = (val & MVNETA_TXQ_SENT_DESC_MASK) >>
+		MVNETA_TXQ_SENT_DESC_SHIFT;
+
+	return sent_desc;
+}
+
+/* Display more error info */
+static void mvneta_rx_error(struct mvneta_port *pp,
+			    struct mvneta_rx_desc *rx_desc)
+{
+	u32 status = rx_desc->status;
+
+	if (!mvneta_rxq_desc_is_first_last(status)) {
+		netdev_err(pp->dev,
+			   "bad rx status %08x (buffer oversize), size=%d\n",
+			   status, rx_desc->data_size);
+		return;
+	}
+
+	switch (status & MVNETA_RXD_ERR_CODE_MASK) {
+	case MVNETA_RXD_ERR_CRC:
+		netdev_err(pp->dev, "bad rx status %08x (crc error), size=%d\n",
+			   status, rx_desc->data_size);
+		break;
+	case MVNETA_RXD_ERR_OVERRUN:
+		netdev_err(pp->dev, "bad rx status %08x (overrun error), size=%d\n",
+			   status, rx_desc->data_size);
+		break;
+	case MVNETA_RXD_ERR_LEN:
+		netdev_err(pp->dev, "bad rx status %08x (max frame length error), size=%d\n",
+			   status, rx_desc->data_size);
+		break;
+	case MVNETA_RXD_ERR_RESOURCE:
+		netdev_err(pp->dev, "bad rx status %08x (resource error), size=%d\n",
+			   status, rx_desc->data_size);
+		break;
+	}
+}
+
+static struct mvneta_rx_queue *mvneta_rxq_handle_get(struct mvneta_port *pp,
+						     int rxq)
+{
+	return &pp->rxqs[rxq];
+}
+
+
+/* Drop packets received by the RXQ and free buffers */
+static void mvneta_rxq_drop_pkts(struct mvneta_port *pp,
+				 struct mvneta_rx_queue *rxq)
+{
+	int rx_done;
+
+	rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
+	if (rx_done)
+		mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
+}
+
+/* Handle rxq fill: allocates rxq skbs; called when initializing a port */
+static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
+			   int num)
+{
+	int i;
+
+	for (i = 0; i < num; i++) {
+		u32 addr;
+
+		/* U-Boot special: Fill in the rx buffer addresses */
+		addr = buffer_loc.rx_buffers + (i * RX_BUFFER_SIZE);
+		mvneta_rx_desc_fill(rxq->descs + i, addr, addr);
+	}
+
+	/* Add this number of RX descriptors as non occupied (ready to
+	 * get packets)
+	 */
+	mvneta_rxq_non_occup_desc_add(pp, rxq, i);
+
+	return 0;
+}
+
+/* Rx/Tx queue initialization/cleanup methods */
+
+/* Create a specified RX queue */
+static int mvneta_rxq_init(struct mvneta_port *pp,
+			   struct mvneta_rx_queue *rxq)
+
+{
+	rxq->size = pp->rx_ring_size;
+
+	/* Allocate memory for RX descriptors */
+	rxq->descs_phys = (dma_addr_t)rxq->descs;
+	if (rxq->descs == NULL)
+		return -ENOMEM;
+
+	rxq->last_desc = rxq->size - 1;
+
+	/* Set Rx descriptors queue starting address */
+	mvreg_write(pp, MVNETA_RXQ_BASE_ADDR_REG(rxq->id), rxq->descs_phys);
+	mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), rxq->size);
+
+	/* Fill RXQ with buffers from RX pool */
+	mvneta_rxq_buf_size_set(pp, rxq, RX_BUFFER_SIZE);
+	mvneta_rxq_fill(pp, rxq, rxq->size);
+
+	return 0;
+}
+
+/* Cleanup Rx queue */
+static void mvneta_rxq_deinit(struct mvneta_port *pp,
+			      struct mvneta_rx_queue *rxq)
+{
+	mvneta_rxq_drop_pkts(pp, rxq);
+
+	rxq->descs             = NULL;
+	rxq->last_desc         = 0;
+	rxq->next_desc_to_proc = 0;
+	rxq->descs_phys        = 0;
+}
+
+/* Create and initialize a tx queue */
+static int mvneta_txq_init(struct mvneta_port *pp,
+			   struct mvneta_tx_queue *txq)
+{
+	txq->size = pp->tx_ring_size;
+
+	/* Allocate memory for TX descriptors */
+	txq->descs_phys = (u32)txq->descs;
+	if (txq->descs == NULL)
+		return -ENOMEM;
+
+	txq->last_desc = txq->size - 1;
+
+	/* Set maximum bandwidth for enabled TXQs */
+	mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0x03ffffff);
+	mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0x3fffffff);
+
+	/* Set Tx descriptors queue starting address */
+	mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), txq->descs_phys);
+	mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), txq->size);
+
+	return 0;
+}
+
+/* Free allocated resources when mvneta_txq_init() fails to allocate memory*/
+static void mvneta_txq_deinit(struct mvneta_port *pp,
+			      struct mvneta_tx_queue *txq)
+{
+	txq->descs             = NULL;
+	txq->last_desc         = 0;
+	txq->next_desc_to_proc = 0;
+	txq->descs_phys        = 0;
+
+	/* Set minimum bandwidth for disabled TXQs */
+	mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0);
+	mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0);
+
+	/* Set Tx descriptors queue starting address and size */
+	mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), 0);
+	mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), 0);
+}
+
+/* Cleanup all Tx queues */
+static void mvneta_cleanup_txqs(struct mvneta_port *pp)
+{
+	int queue;
+
+	for (queue = 0; queue < txq_number; queue++)
+		mvneta_txq_deinit(pp, &pp->txqs[queue]);
+}
+
+/* Cleanup all Rx queues */
+static void mvneta_cleanup_rxqs(struct mvneta_port *pp)
+{
+	int queue;
+
+	for (queue = 0; queue < rxq_number; queue++)
+		mvneta_rxq_deinit(pp, &pp->rxqs[queue]);
+}
+
+
+/* Init all Rx queues */
+static int mvneta_setup_rxqs(struct mvneta_port *pp)
+{
+	int queue;
+
+	for (queue = 0; queue < rxq_number; queue++) {
+		int err = mvneta_rxq_init(pp, &pp->rxqs[queue]);
+		if (err) {
+			netdev_err(pp->dev, "%s: can't create rxq=%d\n",
+				   __func__, queue);
+			mvneta_cleanup_rxqs(pp);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+/* Init all tx queues */
+static int mvneta_setup_txqs(struct mvneta_port *pp)
+{
+	int queue;
+
+	for (queue = 0; queue < txq_number; queue++) {
+		int err = mvneta_txq_init(pp, &pp->txqs[queue]);
+		if (err) {
+			netdev_err(pp->dev, "%s: can't create txq=%d\n",
+				   __func__, queue);
+			mvneta_cleanup_txqs(pp);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static void mvneta_start_dev(struct mvneta_port *pp)
+{
+	/* start the Rx/Tx activity */
+	mvneta_port_enable(pp);
+}
+
+static void mvneta_adjust_link(struct eth_device *dev)
+{
+	struct mvneta_port *pp = dev->priv;
+	struct phy_device *phydev = pp->phydev;
+	int status_change = 0;
+
+	if (phydev->link) {
+		if ((pp->speed != phydev->speed) ||
+		    (pp->duplex != phydev->duplex)) {
+			u32 val;
+
+			val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+			val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
+				 MVNETA_GMAC_CONFIG_GMII_SPEED |
+				 MVNETA_GMAC_CONFIG_FULL_DUPLEX |
+				 MVNETA_GMAC_AN_SPEED_EN |
+				 MVNETA_GMAC_AN_DUPLEX_EN);
+
+			if (phydev->duplex)
+				val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+
+			if (phydev->speed == SPEED_1000)
+				val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
+			else
+				val |= MVNETA_GMAC_CONFIG_MII_SPEED;
+
+			mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+
+			pp->duplex = phydev->duplex;
+			pp->speed  = phydev->speed;
+		}
+	}
+
+	if (phydev->link != pp->link) {
+		if (!phydev->link) {
+			pp->duplex = -1;
+			pp->speed = 0;
+		}
+
+		pp->link = phydev->link;
+		status_change = 1;
+	}
+
+	if (status_change) {
+		if (phydev->link) {
+			u32 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+			val |= (MVNETA_GMAC_FORCE_LINK_PASS |
+				MVNETA_GMAC_FORCE_LINK_DOWN);
+			mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+			mvneta_port_up(pp);
+		} else {
+			mvneta_port_down(pp);
+		}
+	}
+}
+
+static int mvneta_open(struct eth_device *dev)
+{
+	struct mvneta_port *pp = dev->priv;
+	int ret;
+
+	ret = mvneta_setup_rxqs(pp);
+	if (ret)
+		return ret;
+
+	ret = mvneta_setup_txqs(pp);
+	if (ret)
+		return ret;
+
+	mvneta_adjust_link(dev);
+
+	mvneta_start_dev(pp);
+
+	return 0;
+}
+
+/* Initialize hw */
+static int mvneta_init(struct mvneta_port *pp)
+{
+	int queue;
+
+	/* Disable port */
+	mvneta_port_disable(pp);
+
+	/* Set port default values */
+	mvneta_defaults_set(pp);
+
+	pp->txqs = kzalloc(txq_number * sizeof(struct mvneta_tx_queue),
+			   GFP_KERNEL);
+	if (!pp->txqs)
+		return -ENOMEM;
+
+	/* U-Boot special: use preallocated area */
+	pp->txqs[0].descs = buffer_loc.tx_descs;
+
+	/* Initialize TX descriptor rings */
+	for (queue = 0; queue < txq_number; queue++) {
+		struct mvneta_tx_queue *txq = &pp->txqs[queue];
+		txq->id = queue;
+		txq->size = pp->tx_ring_size;
+	}
+
+	pp->rxqs = kzalloc(rxq_number * sizeof(struct mvneta_rx_queue),
+			   GFP_KERNEL);
+	if (!pp->rxqs) {
+		kfree(pp->txqs);
+		return -ENOMEM;
+	}
+
+	/* U-Boot special: use preallocated area */
+	pp->rxqs[0].descs = buffer_loc.rx_descs;
+
+	/* Create Rx descriptor rings */
+	for (queue = 0; queue < rxq_number; queue++) {
+		struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
+		rxq->id = queue;
+		rxq->size = pp->rx_ring_size;
+	}
+
+	return 0;
+}
+
+/* platform glue : initialize decoding windows */
+static void mvneta_conf_mbus_windows(struct mvneta_port *pp)
+{
+	const struct mbus_dram_target_info *dram;
+	u32 win_enable;
+	u32 win_protect;
+	int i;
+
+	dram = mvebu_mbus_dram_info();
+	for (i = 0; i < 6; i++) {
+		mvreg_write(pp, MVNETA_WIN_BASE(i), 0);
+		mvreg_write(pp, MVNETA_WIN_SIZE(i), 0);
+
+		if (i < 4)
+			mvreg_write(pp, MVNETA_WIN_REMAP(i), 0);
+	}
+
+	win_enable = 0x3f;
+	win_protect = 0;
+
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+		mvreg_write(pp, MVNETA_WIN_BASE(i), (cs->base & 0xffff0000) |
+			    (cs->mbus_attr << 8) | dram->mbus_dram_target_id);
+
+		mvreg_write(pp, MVNETA_WIN_SIZE(i),
+			    (cs->size - 1) & 0xffff0000);
+
+		win_enable &= ~(1 << i);
+		win_protect |= 3 << (2 * i);
+	}
+
+	mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable);
+}
+
+/* Power up the port */
+static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
+{
+	u32 ctrl;
+
+	/* MAC Cause register should be cleared */
+	mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0);
+
+	ctrl = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+
+	/* Even though it might look weird, when we're configured in
+	 * SGMII or QSGMII mode, the RGMII bit needs to be set.
+	 */
+	switch (phy_mode) {
+	case PHY_INTERFACE_MODE_QSGMII:
+		mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
+		ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
+		ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
+		break;
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+		ctrl |= MVNETA_GMAC2_PORT_RGMII;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Cancel Port Reset */
+	ctrl &= ~MVNETA_GMAC2_PORT_RESET;
+	mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl);
+
+	while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) &
+		MVNETA_GMAC2_PORT_RESET) != 0)
+		continue;
+
+	return 0;
+}
+
+/* Device initialization routine */
+static int mvneta_probe(struct eth_device *dev)
+{
+	struct mvneta_port *pp = dev->priv;
+	int err;
+
+	pp->tx_ring_size = MVNETA_MAX_TXD;
+	pp->rx_ring_size = MVNETA_MAX_RXD;
+
+	err = mvneta_init(pp);
+	if (err < 0) {
+		dev_err(&pdev->dev, "can't init eth hal\n");
+		return err;
+	}
+
+	mvneta_conf_mbus_windows(pp);
+
+	mvneta_mac_addr_set(pp, dev->enetaddr, rxq_def);
+
+	err = mvneta_port_power_up(pp, pp->phy_interface);
+	if (err < 0) {
+		dev_err(&pdev->dev, "can't power up port\n");
+		return err;
+	}
+
+	/* Call open() now as it needs to be done before runing send() */
+	mvneta_open(dev);
+
+	return 0;
+}
+
+/* U-Boot only functions follow here */
+
+/* SMI / MDIO functions */
+
+static int smi_wait_ready(struct mvneta_port *pp)
+{
+	u32 timeout = MVNETA_SMI_TIMEOUT;
+	u32 smi_reg;
+
+	/* wait till the SMI is not busy */
+	do {
+		/* read smi register */
+		smi_reg = mvreg_read(pp, MVNETA_SMI);
+		if (timeout-- == 0) {
+			printf("Error: SMI busy timeout\n");
+			return -EFAULT;
+		}
+	} while (smi_reg & MVNETA_SMI_BUSY);
+
+	return 0;
+}
+
+/*
+ * smi_reg_read - miiphy_read callback function.
+ *
+ * Returns 16bit phy register value, or 0xffff on error
+ */
+static int smi_reg_read(const char *devname, u8 phy_adr, u8 reg_ofs, u16 *data)
+{
+	struct eth_device *dev = eth_get_dev_by_name(devname);
+	struct mvneta_port *pp = dev->priv;
+	u32 smi_reg;
+	u32 timeout;
+
+	/* check parameters */
+	if (phy_adr > MVNETA_PHY_ADDR_MASK) {
+		printf("Error: Invalid PHY address %d\n", phy_adr);
+		return -EFAULT;
+	}
+
+	if (reg_ofs > MVNETA_PHY_REG_MASK) {
+		printf("Err: Invalid register offset %d\n", reg_ofs);
+		return -EFAULT;
+	}
+
+	/* wait till the SMI is not busy */
+	if (smi_wait_ready(pp) < 0)
+		return -EFAULT;
+
+	/* fill the phy address and regiser offset and read opcode */
+	smi_reg = (phy_adr << MVNETA_SMI_DEV_ADDR_OFFS)
+		| (reg_ofs << MVNETA_SMI_REG_ADDR_OFFS)
+		| MVNETA_SMI_OPCODE_READ;
+
+	/* write the smi register */
+	mvreg_write(pp, MVNETA_SMI, smi_reg);
+
+	/*wait till read value is ready */
+	timeout = MVNETA_SMI_TIMEOUT;
+
+	do {
+		/* read smi register */
+		smi_reg = mvreg_read(pp, MVNETA_SMI);
+		if (timeout-- == 0) {
+			printf("Err: SMI read ready timeout\n");
+			return -EFAULT;
+		}
+	} while (!(smi_reg & MVNETA_SMI_READ_VALID));
+
+	/* Wait for the data to update in the SMI register */
+	for (timeout = 0; timeout < MVNETA_SMI_TIMEOUT; timeout++)
+		;
+
+	*data = (u16)(mvreg_read(pp, MVNETA_SMI) & MVNETA_SMI_DATA_MASK);
+
+	return 0;
+}
+
+/*
+ * smi_reg_write - imiiphy_write callback function.
+ *
+ * Returns 0 if write succeed, -EINVAL on bad parameters
+ * -ETIME on timeout
+ */
+static int smi_reg_write(const char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
+{
+	struct eth_device *dev = eth_get_dev_by_name(devname);
+	struct mvneta_port *pp = dev->priv;
+	u32 smi_reg;
+
+	/* check parameters */
+	if (phy_adr > MVNETA_PHY_ADDR_MASK) {
+		printf("Error: Invalid PHY address %d\n", phy_adr);
+		return -EFAULT;
+	}
+
+	if (reg_ofs > MVNETA_PHY_REG_MASK) {
+		printf("Err: Invalid register offset %d\n", reg_ofs);
+		return -EFAULT;
+	}
+
+	/* wait till the SMI is not busy */
+	if (smi_wait_ready(pp) < 0)
+		return -EFAULT;
+
+	/* fill the phy addr and reg offset and write opcode and data */
+	smi_reg = (data << MVNETA_SMI_DATA_OFFS);
+	smi_reg |= (phy_adr << MVNETA_SMI_DEV_ADDR_OFFS)
+		| (reg_ofs << MVNETA_SMI_REG_ADDR_OFFS);
+	smi_reg &= ~MVNETA_SMI_OPCODE_READ;
+
+	/* write the smi register */
+	mvreg_write(pp, MVNETA_SMI, smi_reg);
+
+	return 0;
+}
+
+static int mvneta_init_u_boot(struct eth_device *dev, bd_t *bis)
+{
+	struct mvneta_port *pp = dev->priv;
+	struct phy_device *phydev;
+
+	mvneta_port_power_up(pp, pp->phy_interface);
+
+	if (!pp->init || pp->link == 0) {
+		/* Set phy address of the port */
+		mvreg_write(pp, MVNETA_PHY_ADDR, pp->phyaddr);
+		phydev = phy_connect(pp->bus, pp->phyaddr, dev,
+				     pp->phy_interface);
+
+		pp->phydev = phydev;
+		phy_config(phydev);
+		phy_startup(phydev);
+		if (!phydev->link) {
+			printf("%s: No link.\n", phydev->dev->name);
+			return -1;
+		}
+
+		/* Full init on first call */
+		mvneta_probe(dev);
+		pp->init = 1;
+	} else {
+		/* Upon all following calls, this is enough */
+		mvneta_port_up(pp);
+		mvneta_port_enable(pp);
+	}
+
+	return 0;
+}
+
+static int mvneta_send(struct eth_device *dev, void *ptr, int len)
+{
+	struct mvneta_port *pp = dev->priv;
+	struct mvneta_tx_queue *txq = &pp->txqs[0];
+	struct mvneta_tx_desc *tx_desc;
+	int sent_desc;
+	u32 timeout = 0;
+
+	/* Get a descriptor for the first part of the packet */
+	tx_desc = mvneta_txq_next_desc_get(txq);
+
+	tx_desc->buf_phys_addr = (u32)ptr;
+	tx_desc->data_size = len;
+	flush_dcache_range((u32)ptr, (u32)ptr + len);
+
+	/* First and Last descriptor */
+	tx_desc->command = MVNETA_TX_L4_CSUM_NOT | MVNETA_TXD_FLZ_DESC;
+	mvneta_txq_pend_desc_add(pp, txq, 1);
+
+	/* Wait for packet to be sent (queue might help with speed here) */
+	sent_desc = mvneta_txq_sent_desc_num_get(pp, txq);
+	while (!sent_desc) {
+		if (timeout++ > 10000) {
+			printf("timeout: packet not sent\n");
+			return -1;
+		}
+		sent_desc = mvneta_txq_sent_desc_num_get(pp, txq);
+	}
+
+	/* txDone has increased - hw sent packet */
+	mvneta_txq_sent_desc_dec(pp, txq, sent_desc);
+	return 0;
+
+	return 0;
+}
+
+static int mvneta_recv(struct eth_device *dev)
+{
+	struct mvneta_port *pp = dev->priv;
+	int rx_done;
+	int packets_done;
+	struct mvneta_rx_queue *rxq;
+
+	/* get rx queue */
+	rxq = mvneta_rxq_handle_get(pp, rxq_def);
+	rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
+	packets_done = rx_done;
+
+	while (packets_done--) {
+		struct mvneta_rx_desc *rx_desc;
+		unsigned char *data;
+		u32 rx_status;
+		int rx_bytes;
+
+		/*
+		 * No cache invalidation needed here, since the desc's are
+		 * located in a uncached memory region
+		 */
+		rx_desc = mvneta_rxq_next_desc_get(rxq);
+
+		rx_status = rx_desc->status;
+		if (!mvneta_rxq_desc_is_first_last(rx_status) ||
+		    (rx_status & MVNETA_RXD_ERR_SUMMARY)) {
+			mvneta_rx_error(pp, rx_desc);
+			/* leave the descriptor untouched */
+			continue;
+		}
+
+		/* 2 bytes for marvell header. 4 bytes for crc */
+		rx_bytes = rx_desc->data_size - 6;
+
+		/* give packet to stack - skip on first 2 bytes */
+		data = (u8 *)rx_desc->buf_cookie + 2;
+		/*
+		 * No cache invalidation needed here, since the rx_buffer's are
+		 * located in a uncached memory region
+		 */
+		NetReceive(data, rx_bytes);
+	}
+
+	/* Update rxq management counters */
+	if (rx_done)
+		mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
+
+	return 0;
+}
+
+static void mvneta_halt(struct eth_device *dev)
+{
+	struct mvneta_port *pp = dev->priv;
+
+	mvneta_port_down(pp);
+	mvneta_port_disable(pp);
+}
+
+int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr)
+{
+	struct eth_device *dev;
+	struct mvneta_port *pp;
+	void *bd_space;
+
+	dev = calloc(1, sizeof(*dev));
+	if (dev == NULL)
+		return -ENOMEM;
+
+	pp = calloc(1, sizeof(*pp));
+	if (pp == NULL)
+		return -ENOMEM;
+
+	dev->priv = pp;
+
+	/*
+	 * Allocate buffer area for descs and rx_buffers. This is only
+	 * done once for all interfaces. As only one interface can
+	 * be active. Make this area DMA save by disabling the D-cache
+	 */
+	if (!buffer_loc.tx_descs) {
+		/* Align buffer area for descs and rx_buffers to 1MiB */
+		bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE);
+		mmu_set_region_dcache_behaviour((u32)bd_space, BD_SPACE,
+						DCACHE_OFF);
+		buffer_loc.tx_descs = (struct mvneta_tx_desc *)bd_space;
+		buffer_loc.rx_descs = (struct mvneta_rx_desc *)
+			((u32)bd_space +
+			 MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc));
+		buffer_loc.rx_buffers = (u32)
+			(bd_space +
+			 MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc) +
+			 MVNETA_MAX_RXD * sizeof(struct mvneta_rx_desc));
+	}
+
+	sprintf(dev->name, "neta%d", devnum);
+
+	pp->base = (void __iomem *)base_addr;
+	dev->iobase = base_addr;
+	dev->init = mvneta_init_u_boot;
+	dev->halt = mvneta_halt;
+	dev->send = mvneta_send;
+	dev->recv = mvneta_recv;
+	dev->write_hwaddr = NULL;
+
+	/*
+	 * The PHY interface type is configured via the
+	 * board specific CONFIG_SYS_NETA_INTERFACE_TYPE
+	 * define.
+	 */
+	pp->phy_interface = CONFIG_SYS_NETA_INTERFACE_TYPE;
+
+	eth_register(dev);
+
+	pp->phyaddr = phy_addr;
+	miiphy_register(dev->name, smi_reg_read, smi_reg_write);
+	pp->bus = miiphy_get_dev_by_name(dev->name);
+
+	return 1;
+}