avr32: convert to dram_init()
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index ed09c8c..dacd427 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -52,6 +52,8 @@
hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
portmux_enable_ebi(16, 23, 0, PORTMUX_DRIVE_HIGH);
+ sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
portmux_enable_usart1(PORTMUX_DRIVE_MIN);
#if defined(CONFIG_MACB)
@@ -68,24 +70,6 @@
return 0;
}
-phys_size_t initdram(int board_type)
-{
- unsigned long expected_size;
- unsigned long actual_size;
- void *sdram_base;
-
- sdram_base = uncached(EBI_SDRAM_BASE);
-
- expected_size = sdram_init(sdram_base, &sdram_config);
- actual_size = get_ram_size(sdram_base, expected_size);
-
- if (expected_size != actual_size)
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
-
- return actual_size;
-}
-
int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x01;
diff --git a/board/atmel/atngw100mkii/atngw100mkii.c b/board/atmel/atngw100mkii/atngw100mkii.c
index 912ea10..8e215d5 100644
--- a/board/atmel/atngw100mkii/atngw100mkii.c
+++ b/board/atmel/atngw100mkii/atngw100mkii.c
@@ -69,6 +69,9 @@
portmux_select_gpio(PORTMUX_PORT_E, 1 << 23,
PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH
| PORTMUX_DRIVE_MIN);
+
+ sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
portmux_enable_usart1(PORTMUX_DRIVE_MIN);
#if defined(CONFIG_MACB)
@@ -85,24 +88,6 @@
return 0;
}
-phys_size_t initdram(int board_type)
-{
- unsigned long expected_size;
- unsigned long actual_size;
- void *sdram_base;
-
- sdram_base = uncached(EBI_SDRAM_BASE);
-
- expected_size = sdram_init(sdram_base, &sdram_config);
- actual_size = get_ram_size(sdram_base, expected_size);
-
- if (expected_size != actual_size)
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
-
- return actual_size;
-}
-
int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x01;
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index f354694..fd4363b 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -78,7 +78,10 @@
hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
portmux_enable_ebi(sdram_config.data_bits, 23, 0, PORTMUX_DRIVE_HIGH);
+ sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
portmux_enable_usart1(PORTMUX_DRIVE_MIN);
+
#if defined(CONFIG_MACB)
portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
@@ -90,24 +93,6 @@
return 0;
}
-phys_size_t initdram(int board_type)
-{
- unsigned long expected_size;
- unsigned long actual_size;
- void *sdram_base;
-
- sdram_base = uncached(EBI_SDRAM_BASE);
-
- expected_size = sdram_init(sdram_base, &sdram_config);
- actual_size = get_ram_size(sdram_base, expected_size);
-
- if (expected_size != actual_size)
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
-
- return actual_size;
-}
-
int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x10;