configs: ls1028a: use default SDHC clock divider value
The SDHC clock divider value for LS1028A should be default 2,
not 1.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
index 31e3b5a..c80f8c7 100644
--- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
@@ -4,7 +4,6 @@
CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_NXP_ESBC=y
CONFIG_FSPI_AHB_EN_4BYTE=y
-CONFIG_SYS_FSL_SDHC_CLK_DIV=1
CONFIG_ENV_SIZE=0x2000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig
index 7292212..b3e3bcf 100644
--- a/configs/ls1028aqds_tfa_defconfig
+++ b/configs/ls1028aqds_tfa_defconfig
@@ -3,7 +3,6 @@
CONFIG_TFABOOT=y
CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_FSPI_AHB_EN_4BYTE=y
-CONFIG_SYS_FSL_SDHC_CLK_DIV=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x500000
CONFIG_NR_DRAM_BANKS=2
diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
index db92204..02770b1 100644
--- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
@@ -4,7 +4,6 @@
CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_NXP_ESBC=y
CONFIG_FSPI_AHB_EN_4BYTE=y
-CONFIG_SYS_FSL_SDHC_CLK_DIV=1
CONFIG_ENV_SIZE=0x2000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index 41fe40a..6715d31 100644
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -3,7 +3,6 @@
CONFIG_TFABOOT=y
CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_FSPI_AHB_EN_4BYTE=y
-CONFIG_SYS_FSL_SDHC_CLK_DIV=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x500000
CONFIG_NR_DRAM_BANKS=2