* Fix problems caused by Robert Schwebel's cramfs patch
* Patch by Scott McNutt, 02 Jan 2004:
Add support for the Nios Active Serial Memory Interface (ASMI)
on Cyclone devices
* Patch by Andrea Marson, 16 Dec 2003:
Add support for the PPChameleon ME and HI modules
* Patch by Yuli Barcohen, 22 Dec 2003:
Add support for Motorola DUET ADS board (MPC87x/88x)
diff --git a/board/fads/fads.c b/board/fads/fads.c
index aca7b28..3083740 100644
--- a/board/fads/fads.c
+++ b/board/fads/fads.c
@@ -1,7 +1,9 @@
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
+ * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -21,15 +23,16 @@
* MA 02111-1307 USA
*/
-#include <common.h>
#include <config.h>
+#include <common.h>
#include <mpc8xx.h>
-#include "fads.h"
-
-/* ------------------------------------------------------------------------- */
#define _NOT_USED_ 0xFFFFFFFF
+/* ========================================================================= */
+
+#ifndef CONFIG_DUET_ADS /* No old DRAM on Duet */
+
#if defined(CONFIG_DRAM_50MHZ)
/* 50MHz tables */
static const uint dram_60ns[] =
@@ -184,105 +187,6 @@
#endif
/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- */
-
-#if defined(CONFIG_FADS) && !defined(CONFIG_MPC86xADS)
-static void checkdboard(void)
-{
- /* get db type from BCSR 3 */
- uint k = (*((uint *)BCSR3) >> 24) & 0x3f;
-
- printf(" with db ");
-
- switch(k) {
- case 0x03 :
- puts ("MPC823");
- break;
- case 0x20 :
- puts ("MPC801");
- break;
- case 0x21 :
- puts ("MPC850");
- break;
- case 0x22 :
- puts ("MPC821, MPC860 / MPC860SAR / MPC860T");
- break;
- case 0x23 :
- puts ("MPC860SAR");
- break;
- case 0x24 :
- case 0x2A :
- puts ("MPC860T");
- break;
- case 0x3F :
- puts ("MPC850SAR");
- break;
- default : printf("0x%x", k);
- }
-}
-#endif /* defined(CONFIG_FADS) && !defined(CONFIG_MPC86xADS) */
-
-int checkboard (void)
-{
- /* get revision from BCSR 3 */
- uint r = (((*((uint *) BCSR3) >> 23) & 1) << 3)
- | (((*((uint *) BCSR3) >> 19) & 1) << 2)
- | (((*((uint *) BCSR3) >> 16) & 3));
-
- puts ("Board: ");
-
-#ifdef CONFIG_FADS
-# ifdef CONFIG_MPC86xADS
- puts ("MPC86xADS");
-# else
- puts ("FADS");
- checkdboard ();
-# endif /* !CONFIG_MPC86xADS */
- printf (" rev ");
-
- switch (r) {
- case 0x00:
- puts ("ENG\n");
- break;
- case 0x01:
- puts ("PILOT\n");
- break;
- default:
- printf ("unknown (0x%x)\n", r);
- return (-1);
- }
-#endif /* CONFIG_FADS */
-
-#ifdef CONFIG_ADS
- printf ("ADS rev ");
-
- switch (r) {
- case 0x00:
- puts ("ENG - this board sucks, check the errata, not supported\n");
- return -1;
- case 0x01:
- puts ("PILOT - warning, read errata \n");
- break;
- case 0x02:
- puts ("A - warning, read errata \n");
- break;
- case 0x03:
- puts ("B \n");
- break;
- default:
- printf ("unknown revision (0x%x)\n", r);
- return (-1);
- }
-#endif /* CONFIG_ADS */
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
static long int dram_size (long int *base, long int maxsize)
{
volatile long int *addr=base;
@@ -425,9 +329,11 @@
/* maybe we should turn off upma here or something */
}
+#endif /* !CONFIG_DUET_ADS */
-#ifdef CONFIG_FADS
-/* SDRAM SUPPORT (FADS ONLY) */
+/* ========================================================================= */
+
+#ifdef CONFIG_FADS /* SDRAM exists on FADS and newer boards */
#if defined(CONFIG_SDRAM_100MHZ)
@@ -728,15 +634,18 @@
}
}
-/* SDRAM SUPPORT (FADS ONLY) */
#endif /* CONFIG_FADS */
+/* ========================================================================= */
+
long int initdram (int board_type)
{
uint sdramsz = 0; /* size of sdram in Mbytes */
uint base = 0; /* base of dram in bytes */
uint m = 0; /* size of dram in Mbytes */
+#ifndef CONFIG_DUET_ADS
uint k, s;
+#endif
#ifdef CONFIG_FADS
if (!initsdram (0x00000000, &sdramsz)) {
@@ -744,7 +653,7 @@
printf ("(%u MB SDRAM) ", sdramsz);
}
#endif
-
+#ifndef CONFIG_DUET_ADS /* No old DRAM on Duet */
k = (*((uint *) BCSR2) >> 23) & 0x0f;
switch (k & 0x3) {
@@ -795,17 +704,9 @@
_dramdisable ();
m = 0;
}
-
+#endif /* !CONFIG_DUET_ADS */
m += sdramsz; /* add sdram size to total */
- if (!m) {
- /********************************
- *DRAM ERROR, HALT PROCESSOR
- *********************************/
- while (1);
- return -1;
- }
-
return (m << 20);
}
@@ -819,6 +720,105 @@
return (0);
}
+/* ========================================================================= */
+
+/*
+ * Check Board Identity:
+ */
+
+#if defined(CONFIG_FADS) && defined(CFG_DAUGHTERBOARD)
+static void checkdboard(void)
+{
+ /* get db type from BCSR 3 */
+ uint k = (*((uint *)BCSR3) >> 24) & 0x3f;
+
+ puts (" with db ");
+
+ switch(k) {
+ case 0x03 :
+ puts ("MPC823");
+ break;
+ case 0x20 :
+ puts ("MPC801");
+ break;
+ case 0x21 :
+ puts ("MPC850");
+ break;
+ case 0x22 :
+ puts ("MPC821, MPC860 / MPC860SAR / MPC860T");
+ break;
+ case 0x23 :
+ puts ("MPC860SAR");
+ break;
+ case 0x24 :
+ case 0x2A :
+ puts ("MPC860T");
+ break;
+ case 0x3F :
+ puts ("MPC850SAR");
+ break;
+ default : printf("0x%x", k);
+ }
+}
+#endif /* defined(CONFIG_FADS) && defined(CFG_DAUGHTERBOARD) */
+
+int checkboard (void)
+{
+ /* get revision from BCSR 3 */
+ uint r = (((*((uint *) BCSR3) >> 23) & 1) << 3)
+ | (((*((uint *) BCSR3) >> 19) & 1) << 2)
+ | (((*((uint *) BCSR3) >> 16) & 3));
+
+ puts ("Board: ");
+
+#if defined(CONFIG_MPC86xADS)
+ puts ("MPC86xADS");
+#elif defined(CONFIG_DUET_ADS)
+ puts ("DUET ADS");
+ r = 0; /* I've got NR (No Revision) board */
+#elif defined(CONFIG_FADS)
+ puts ("FADS");
+ checkdboard ();
+#else
+ puts ("ADS");
+#endif
+ puts (" rev ");
+
+ switch (r) {
+#if defined(CONFIG_ADS)
+ case 0x00:
+ puts ("ENG - this board sucks, check the errata, not supported\n");
+ return -1;
+ case 0x01:
+ puts ("PILOT - warning, read errata \n");
+ break;
+ case 0x02:
+ puts ("A - warning, read errata \n");
+ break;
+ case 0x03:
+ puts ("B \n");
+ break;
+#elif defined(CONFIG_DUET_ADS)
+ case 0x00:
+ puts ("NR\n");
+ break;
+#else /* FADS and newer */
+ case 0x00:
+ puts ("ENG\n");
+ break;
+ case 0x01:
+ puts ("PILOT\n");
+ break;
+#endif /* CONFIG_ADS */
+ default:
+ printf ("unknown (0x%x)\n", r);
+ return -1;
+ }
+
+ return 0;
+}
+
+/* ========================================================================= */
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
@@ -964,7 +964,7 @@
#endif /* CFG_CMD_PCMCIA */
-/* ------------------------------------------------------------------------- */
+/* ========================================================================= */
#ifdef CFG_PC_IDE_RESET
@@ -988,4 +988,3 @@
}
#endif /* CFG_PC_IDE_RESET */
-/* ------------------------------------------------------------------------- */