ti: i2c: Convert CONFIG_SYS_OMAP24_I2C to CONFIG_SYS_I2C namespace
The omap24xx I2C driver uses its own CONFIG namespace for common I2C
variables. Rather than convert more of them to Kconfig, rename these to
the common I2C ones and remove the entirely unused functionality. As
part of this, we make the am335x_shc platforms consistent with their
intended speed values.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/board/bosch/guardian/board.c b/board/bosch/guardian/board.c
index 179511a..01d72d6 100644
--- a/board/bosch/guardian/board.c
+++ b/board/bosch/guardian/board.c
@@ -142,7 +142,7 @@
const struct dpll_params *get_dpll_ddr_params(void)
{
enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return &dpll_ddr;
}
diff --git a/board/compulab/cm_t43/cm_t43.c b/board/compulab/cm_t43/cm_t43.c
index efdade1..bcfe1bf 100644
--- a/board/compulab/cm_t43/cm_t43.c
+++ b/board/compulab/cm_t43/cm_t43.c
@@ -48,7 +48,7 @@
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
gpmc_init();
set_i2c_pin_mux();
- i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
i2c_probe(TPS65218_CHIP_PM);
return 0;
diff --git a/board/compulab/cm_t43/spl.c b/board/compulab/cm_t43/spl.c
index 016c63a..9c6806c 100644
--- a/board/compulab/cm_t43/spl.c
+++ b/board/compulab/cm_t43/spl.c
@@ -106,7 +106,7 @@
void scale_vcores(void)
{
set_i2c_pin_mux();
- i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
if (i2c_probe(TPS65218_CHIP_PM))
return;
diff --git a/board/tcl/sl50/board.c b/board/tcl/sl50/board.c
index d213608..24bbcd4 100644
--- a/board/tcl/sl50/board.c
+++ b/board/tcl/sl50/board.c
@@ -161,7 +161,7 @@
const struct dpll_params *get_dpll_ddr_params(void)
{
enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return &dpll_ddr_sl50;
}
diff --git a/board/vscom/baltos/board.c b/board/vscom/baltos/board.c
index 0007cac..07fe454 100644
--- a/board/vscom/baltos/board.c
+++ b/board/vscom/baltos/board.c
@@ -187,7 +187,7 @@
*/
i2c_set_bus_num(1);
- printf("I2C speed: %d Hz\n", CONFIG_SYS_OMAP24_I2C_SPEED);
+ printf("I2C speed: %d Hz\n", CONFIG_SYS_I2C_SPEED);
if (i2c_probe(TPS65910_CTRL_I2C_ADDR)) {
puts("i2c: cannot access TPS65910\n");