arm: dra7xx: Assign omap_vcores based on board type
Currently omap_vcores which holds pmic data is being assigned based
on the SoC type. PMIC is not a part of SoC. It is logical to
to assign omap_vcores based on board type. Hence over ride the
vcores_init function and assign omap_vcores based on the board type.
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 3fbbc9b..0394e4e 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -305,6 +305,82 @@
}
}
+struct vcores_data dra752_volts = {
+ .mpu.value = VDD_MPU_DRA7,
+ .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU,
+ .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .mpu.addr = TPS659038_REG_ADDR_SMPS12,
+ .mpu.pmic = &tps659038,
+ .mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
+
+ .eve.value = VDD_EVE_DRA7,
+ .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE,
+ .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .eve.addr = TPS659038_REG_ADDR_SMPS45,
+ .eve.pmic = &tps659038,
+ .eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
+
+ .gpu.value = VDD_GPU_DRA7,
+ .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU,
+ .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .gpu.addr = TPS659038_REG_ADDR_SMPS6,
+ .gpu.pmic = &tps659038,
+ .gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
+
+ .core.value = VDD_CORE_DRA7,
+ .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE,
+ .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .core.addr = TPS659038_REG_ADDR_SMPS7,
+ .core.pmic = &tps659038,
+
+ .iva.value = VDD_IVA_DRA7,
+ .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA,
+ .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .iva.addr = TPS659038_REG_ADDR_SMPS8,
+ .iva.pmic = &tps659038,
+ .iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
+};
+
+struct vcores_data dra722_volts = {
+ .mpu.value = VDD_MPU_DRA7,
+ .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU,
+ .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .mpu.addr = TPS65917_REG_ADDR_SMPS1,
+ .mpu.pmic = &tps659038,
+ .mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
+
+ .core.value = VDD_CORE_DRA7,
+ .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE,
+ .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .core.addr = TPS65917_REG_ADDR_SMPS2,
+ .core.pmic = &tps659038,
+
+ /*
+ * The DSPEVE, GPU and IVA rails are usually grouped on DRA72x
+ * designs and powered by TPS65917 SMPS3, as on the J6Eco EVM.
+ */
+ .gpu.value = VDD_GPU_DRA7,
+ .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU,
+ .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .gpu.addr = TPS65917_REG_ADDR_SMPS3,
+ .gpu.pmic = &tps659038,
+ .gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
+
+ .eve.value = VDD_EVE_DRA7,
+ .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE,
+ .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .eve.addr = TPS65917_REG_ADDR_SMPS3,
+ .eve.pmic = &tps659038,
+ .eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
+
+ .iva.value = VDD_IVA_DRA7,
+ .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA,
+ .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .iva.addr = TPS65917_REG_ADDR_SMPS3,
+ .iva.pmic = &tps659038,
+ .iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
+};
+
/**
* @brief board_init
*
@@ -390,6 +466,21 @@
}
#endif /* CONFIG_SPL_BUILD */
+void vcores_init(void)
+{
+ if (board_is_dra74x_evm()) {
+ *omap_vcores = &dra752_volts;
+ } else if (board_is_dra72x_evm()) {
+ *omap_vcores = &dra722_volts;
+ } else {
+ /* If EEPROM is not populated */
+ if (is_dra72x())
+ *omap_vcores = &dra722_volts;
+ else
+ *omap_vcores = &dra752_volts;
+ }
+}
+
void set_muxconf_regs(void)
{
do_set_mux32((*ctrl)->control_padconf_core_base,