at91sam9/at91cap: move common serial initialisation to cpu
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index ef99b8b..985daf7 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -26,6 +26,7 @@
#include <asm/arch/at91sam9260.h>
#include <asm/arch/at91sam9260_matrix.h>
#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
@@ -43,33 +44,6 @@
* Miscelaneous platform dependent initialisations
*/
-static void at91sam9260ek_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
- at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0);
-#endif
-
-#ifdef CONFIG_USART1
- at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1);
-#endif
-
-#ifdef CONFIG_USART2
- at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2);
-#endif
-
-#ifdef CONFIG_USART3 /* DBGU */
- at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
-#endif
-}
-
#ifdef CONFIG_CMD_NAND
static void at91sam9260ek_nand_hw_init(void)
{
@@ -217,7 +191,7 @@
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- at91sam9260ek_serial_hw_init();
+ at91_serial_hw_init();
#ifdef CONFIG_CMD_NAND
at91sam9260ek_nand_hw_init();
#endif