mpc85xx: Add support for the MPC8572DS reference board
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
new file mode 100644
index 0000000..70b548b
--- /dev/null
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -0,0 +1,573 @@
+/*
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/io.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+#include "../common/pixis.h"
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+long int fixed_sdram(void);
+
+int checkboard (void)
+{
+ printf ("Board: MPC8572DS, System ID: 0x%02x, "
+ "System Version: 0x%02x, FPGA Version: 0x%02x\n",
+ in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
+ in8(PIXIS_BASE + PIXIS_PVER));
+ return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+ phys_size_t dram_size = 0;
+
+ puts("Initializing....");
+
+#ifdef CONFIG_SPD_EEPROM
+ dram_size = fsl_ddr_sdram();
+
+ dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+
+ dram_size *= 0x100000;
+#else
+ dram_size = fixed_sdram();
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /*
+ * Initialize and enable DDR ECC.
+ */
+ ddr_enable_ecc(dram_size);
+#endif
+ puts(" DDR: ");
+ return dram_size;
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+
+phys_size_t fixed_sdram (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+ uint d_init;
+
+ ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
+ ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+
+ ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
+ ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
+ ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
+ ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
+ ddr->sdram_mode = CFG_DDR_MODE_1;
+ ddr->sdram_mode_2 = CFG_DDR_MODE_2;
+ ddr->sdram_interval = CFG_DDR_INTERVAL;
+ ddr->sdram_data_init = CFG_DDR_DATA_INIT;
+ ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
+ ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
+
+#if defined (CONFIG_DDR_ECC)
+ ddr->err_int_en = CFG_DDR_ERR_INT_EN;
+ ddr->err_disable = CFG_DDR_ERR_DIS;
+ ddr->err_sbe = CFG_DDR_SBE;
+#endif
+ asm("sync;isync");
+
+ udelay(500);
+
+ ddr->sdram_cfg = CFG_DDR_CONTROL;
+
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ d_init = 1;
+ debug("DDR - 1st controller: memory initializing\n");
+ /*
+ * Poll until memory is initialized.
+ * 512 Meg at 400 might hit this 200 times or so.
+ */
+ while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
+ udelay(1000);
+ }
+ debug("DDR: memory initialized\n\n");
+ asm("sync; isync");
+ udelay(500);
+#endif
+
+ return 512 * 1024 * 1024;
+}
+
+#endif
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif
+
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif
+
+#ifdef CONFIG_PCIE3
+static struct pci_controller pcie3_hose;
+#endif
+
+int first_free_busno=0;
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ uint devdisr = gur->devdisr;
+ uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+ uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+ debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
+ devdisr, io_sel, host_agent);
+
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
+ printf (" eTSEC1 is in sgmii mode.\n");
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
+ printf (" eTSEC2 is in sgmii mode.\n");
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+ printf (" eTSEC3 is in sgmii mode.\n");
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
+ printf (" eTSEC4 is in sgmii mode.\n");
+
+
+#ifdef CONFIG_PCIE3
+ {
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pcie3_hose;
+ int pcie_ep = (host_agent == 0) || (host_agent == 3) ||
+ (host_agent == 5) || (host_agent == 6);
+ int pcie_configured = io_sel >= 1;
+ u32 temp32;
+
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ printf ("\n PCIE3 connected to ULI as %s (base address %x)",
+ pcie_ep ? "End Point" : "Root Complex",
+ (uint)pci);
+ if (pci->pme_msg_det) {
+ pci->pme_msg_det = 0xffffffff;
+ debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
+ }
+ printf ("\n");
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCIE3_MEM_BASE,
+ CFG_PCIE3_MEM_PHYS,
+ CFG_PCIE3_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCIE3_IO_BASE,
+ CFG_PCIE3_IO_PHYS,
+ CFG_PCIE3_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+
+ first_free_busno=hose->last_busno+1;
+ printf (" PCIE3 on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+
+ /*
+ * Activate ULI1575 legacy chip by performing a fake
+ * memory access. Needed to make ULI RTC work.
+ * Device 1d has the first on-board memory BAR.
+ */
+
+ pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ),
+ PCI_BASE_ADDRESS_1, &temp32);
+ if (temp32 >= CFG_PCIE3_MEM_PHYS) {
+ debug(" uli1572 read to %x\n", temp32);
+ in_be32((unsigned *)temp32);
+ }
+ } else {
+ printf (" PCIE3: disabled\n");
+ }
+
+ }
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
+#endif
+
+#ifdef CONFIG_PCIE2
+ {
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pcie2_hose;
+ int pcie_ep = (host_agent == 2) || (host_agent == 4) ||
+ (host_agent == 6);
+ int pcie_configured = io_sel & 4;
+
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)",
+ pcie_ep ? "End Point" : "Root Complex",
+ (uint)pci);
+ if (pci->pme_msg_det) {
+ pci->pme_msg_det = 0xffffffff;
+ debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
+ }
+ printf ("\n");
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCIE2_MEM_BASE,
+ CFG_PCIE2_MEM_PHYS,
+ CFG_PCIE2_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCIE2_IO_BASE,
+ CFG_PCIE2_IO_PHYS,
+ CFG_PCIE2_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+ first_free_busno=hose->last_busno+1;
+ printf (" PCIE2 on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+
+ } else {
+ printf (" PCIE2: disabled\n");
+ }
+
+ }
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
+#endif
+#ifdef CONFIG_PCIE1
+ {
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pcie1_hose;
+ int pcie_ep = (host_agent == 1) || (host_agent == 4) ||
+ (host_agent == 5);
+ int pcie_configured = io_sel & 6;
+
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ printf ("\n PCIE1 connected to Slot 2 as %s (base address %x)",
+ pcie_ep ? "End Point" : "Root Complex",
+ (uint)pci);
+ if (pci->pme_msg_det) {
+ pci->pme_msg_det = 0xffffffff;
+ debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
+ }
+ printf ("\n");
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCIE1_MEM_BASE,
+ CFG_PCIE1_MEM_PHYS,
+ CFG_PCIE1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCIE1_IO_BASE,
+ CFG_PCIE1_IO_PHYS,
+ CFG_PCIE1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+ hose->first_busno=first_free_busno;
+
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+
+ first_free_busno=hose->last_busno+1;
+ printf(" PCIE1 on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+
+ } else {
+ printf (" PCIE1: disabled\n");
+ }
+
+ }
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif
+}
+#endif
+
+int board_early_init_r(void)
+{
+ unsigned int i;
+ const unsigned int flashbase = CFG_FLASH_BASE;
+ const u8 flash_esel = 2;
+
+ /*
+ * Remap Boot flash + PROMJET region to caching-inhibited
+ * so that flash can be erased properly.
+ */
+
+ /* Invalidate any remaining lines of the flash from caches. */
+ for (i = 0; i < 256*1024*1024; i+=32) {
+ asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i));
+ asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i));
+ }
+
+ /* invalidate existing TLB entry for flash + promjet */
+ disable_tlb(flash_esel);
+
+ set_tlb(1, flashbase, flashbase, /* tlb, epn, rpn */
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
+ 0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */
+
+ return 0;
+}
+
+#ifdef CONFIG_GET_CLK_FROM_ICS307
+/* decode S[0-2] to Output Divider (OD) */
+static unsigned char ics307_S_to_OD[] = {
+ 10, 2, 8, 4, 5, 7, 3, 6
+};
+
+/* Calculate frequency being generated by ICS307-02 clock chip based upon
+ * the control bytes being programmed into it. */
+/* XXX: This function should probably go into a common library */
+static unsigned long
+ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2)
+{
+ const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ;
+ unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
+ unsigned long RDW = cw2 & 0x7F;
+ unsigned long OD = ics307_S_to_OD[cw0 & 0x7];
+ unsigned long freq;
+
+ /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */
+
+ /* cw0: C1 C0 TTL F1 F0 S2 S1 S0
+ * cw1: V8 V7 V6 V5 V4 V3 V2 V1
+ * cw2: V0 R6 R5 R4 R3 R2 R1 R0
+ *
+ * R6:R0 = Reference Divider Word (RDW)
+ * V8:V0 = VCO Divider Word (VDW)
+ * S2:S0 = Output Divider Select (OD)
+ * F1:F0 = Function of CLK2 Output
+ * TTL = duty cycle
+ * C1:C0 = internal load capacitance for cyrstal
+ */
+
+ /* Adding 1 to get a "nicely" rounded number, but this needs
+ * more tweaking to get a "properly" rounded number. */
+
+ freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD));
+
+ debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2,
+ freq);
+ return freq;
+}
+
+unsigned long get_board_sys_clk(ulong dummy)
+{
+ return ics307_clk_freq (
+ in8(PIXIS_BASE + PIXIS_VSYSCLK0),
+ in8(PIXIS_BASE + PIXIS_VSYSCLK1),
+ in8(PIXIS_BASE + PIXIS_VSYSCLK2)
+ );
+}
+
+unsigned long get_board_ddr_clk(ulong dummy)
+{
+ return ics307_clk_freq (
+ in8(PIXIS_BASE + PIXIS_VDDRCLK0),
+ in8(PIXIS_BASE + PIXIS_VDDRCLK1),
+ in8(PIXIS_BASE + PIXIS_VDDRCLK2)
+ );
+}
+#else
+unsigned long get_board_sys_clk(ulong dummy)
+{
+ u8 i;
+ ulong val = 0;
+
+ i = in8(PIXIS_BASE + PIXIS_SPD);
+ i &= 0x07;
+
+ switch (i) {
+ case 0:
+ val = 33333333;
+ break;
+ case 1:
+ val = 40000000;
+ break;
+ case 2:
+ val = 50000000;
+ break;
+ case 3:
+ val = 66666666;
+ break;
+ case 4:
+ val = 83333333;
+ break;
+ case 5:
+ val = 100000000;
+ break;
+ case 6:
+ val = 133333333;
+ break;
+ case 7:
+ val = 166666666;
+ break;
+ }
+
+ return val;
+}
+
+unsigned long get_board_ddr_clk(ulong dummy)
+{
+ u8 i;
+ ulong val = 0;
+
+ i = in8(PIXIS_BASE + PIXIS_SPD);
+ i &= 0x38;
+ i >>= 3;
+
+ switch (i) {
+ case 0:
+ val = 33333333;
+ break;
+ case 1:
+ val = 40000000;
+ break;
+ case 2:
+ val = 50000000;
+ break;
+ case 3:
+ val = 66666666;
+ break;
+ case 4:
+ val = 83333333;
+ break;
+ case 5:
+ val = 100000000;
+ break;
+ case 6:
+ val = 133333333;
+ break;
+ case 7:
+ val = 166666666;
+ break;
+ }
+ return val;
+}
+#endif
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ int node, tmp[2];
+ const char *path;
+ ulong base, size;
+
+ ft_cpu_setup(blob, bd);
+
+ base = getenv_bootm_low();
+ size = getenv_bootm_size();
+
+ fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#ifdef CONFIG_PCIE3
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+#ifdef CONFIG_PCIE2
+ path = fdt_getprop(blob, node, "pci1", NULL);
+ if (path) {
+ tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+#ifdef CONFIG_PCIE1
+ path = fdt_getprop(blob, node, "pci2", NULL);
+ if (path) {
+ tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+ }
+}
+#endif
+
+#ifdef CONFIG_MP
+extern void cpu_mp_lmb_reserve(struct lmb *lmb);
+
+void board_lmb_reserve(struct lmb *lmb)
+{
+ cpu_mp_lmb_reserve(lmb);
+}
+#endif