diff --git a/doc/README.xpedite1k b/doc/README.xpedite1k
index 34bba13..1da8b80 100644
--- a/doc/README.xpedite1k
+++ b/doc/README.xpedite1k
@@ -23,7 +23,7 @@
 change the 1st page of the EEPROM!  Unpopulated jumper J560 can get you
 out of trouble as it disables the strapping read from EEPROM.
 
-I2C iprobe
+I2C probe
 =====================
 
 The i2c utilities work and have been tested on Rev B. of the 440GX. See
@@ -47,10 +47,10 @@
 
 This will select the default sys0 and sys1 settings (the serial
 eeproms are not used). Then power up the board and fix the serial
-eeprom using the imm command. Here are the values I currently
+eeprom using the 'i2c mm' command. Here are the values I currently
 use:
 
-=> imd 50 0 10
+=> i2c md 50 0 10
 
 0000: 85 7d 42 06 07 80 11 00 00 00 00 00 00 00 00 00    .}B.............